Cargo Handling Sheet. Caradol SP Document date: 4 June 2014 Revision 1

Transcription

1 Cargo Handling Sheet Caradol SP 42-15

2 Product Details: Product Name: Caradol SP Shipping Name: Chemical Family: Product Code: SDS: Acrylonitrile-Styrene Copolymer Dispersion in Polyether Polyol Alcohols, Gycols U317G Physical Properties: Density: 1, deg C. Specific Gravity: Dynamic Viscosity: deg C deg C. Vapor Pressure: Boiling Point: N/A N/A Pour Point: -21 deg C. Flash Point: 200 deg C. Transshipments Prior to arranging a transhipment, the Shell Chemical Charterer must be in agreement as to the Owner s proposed plan. Marpol Details: Marpol Annex: II IMO Ship Type: 3 Shell Chemicals requires a ship type 2 IMO Pollution Category: Oil Like: High Viscosity: Solidifying: Y 2

3 USCG: USCG group 20, not compatible with group 12 Isocyanates. Cargo Handling Requirements: Prepurging of Vessel s Tanks: Blanket Required: Percent Oxygen in Nitrogen Blanket: Vapor Space Purge: <5% See also Regional Requirements notes Loading Temperature Range: deg C. Transit Temperature Range: deg C. Discharge Temperature Range: deg C. Maximum Heating Coil Temperature: 100 deg C. Adjacent Maximum Cargo Temperature: 50 deg C. Regional; Requirements: See tes tes: For voyages between Amsterdam, Rotterdam, Antwerp, and the UK, no nitrogen blanket required. tes: For barge voyages in Europe Stainless steel required. tes: For international vessels, if coated tanks presented, contact local Chemicals MTA. tes: Loading in Europe, no wall wash required. tes: If Nitrogen blanket is in place and Carrier chooses to transship, carrier must reapply nitrogen blanket on the cargo, both on the discharging and receiving ship, at their time, risk, and expense. Tank Acceptance Requirements: All shore and ship cargo lines and tanks, not dedicated for this product, are to be presented clean (residual free), dry, odor free, and rust free, with good gaskets and pressure tested heating coils. Stainless Steel or Coated Tanks : Wall Wash Required: Wash Specifications: Coated, carrier to verify suitability of coating for product. See also Regional Requirements notes. International, see also Regional Requirement notes As per local requirements. 3

4 Sample Testing and Product Release Loading: Shore tank approved by location based on local process. Manifold samples tested in the field for appearance only, or according to local process. Product release based on location process. Discharge: Product acceptance based on location process. Manifold samples tested in the field for appearance only. Safety Information and Incident Reporting. Safety Information: For more detailed information, refer to the SDS or e-sds for reportable spill/release quantities whether in the water, air or ground. Incident Reporting: International Registered Vessels:- If an incident occurs call Shell International Trading and Shipping in London on (44) Jones Act Vessels:- If an incident occurs, call the Shell 24 hr. incident number at For additional marine cargo handling advice or information, contact Captain Eddie Trotter at ( ) 4

5 Shell Chemical LP PO Box 4407 Houston Texas USA Tel Internet Disclaimer The information contained in this publication is, to the best of our knowledge, true and accurate, but any recommendations or suggestions that may be made are without guarantee, since the conditions of use are beyond our control. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use. Shell Chemicals The expression Shell Chemicals refers to the companies of the Shell Group of companies that are engaged in the chemical businesses. Each of the companies that make up the Shell Group of companies is an independent entity and has its own separate identity. 5