Fittings Trade Net Price Sheet - US

Transcription

1 Steel Conduit - - Galvanized RMC Nipples RMC Elbows Speed Couple RMC Running Thread Pipe Yard Light Elbows Aluminum Conduit Nipples Elbows Couplings Electrical Metallic Tubing -- Galvanized Elbows Fittings Net Price Sheet - US Nipples Elbows Couplings Effective: March 1, 2018 Price Sheet No. ECN0318 US :

2 RIGID STEEL CONDUIT AND EMT FITTINGS COUPLINGS Galvanized Rigid Conduit Weight - Lbs. List Price Per Std. Outside Size 100 Ctn. Per Ctn. Per 100 Diameter (in.) Length (in.) 1/2 $ /8 3/4 $ /64 1 $ /32 1-1/4 $ /32 1-1/2 $ /16 2 $1, /8 2-1/2 $2, /16 3 $3, /16 3-1/2 $4, /32 4 $4, /64 5 $9, B B /64 6 $13, B B /4 Manufactured to UL Specifications *Also, for use with Intermediate Metal Conduit ELBOWS 90 Galvanized Rigid Conduit* Weight-Lbs. Std Lgth. List Price Per Std. Minimum Each End Size 100 Ctn. Per Ctn. Per 100 Radius (in.) (in.) 1/2 $ /4 3/4 $1, /2 2-1/4 1 $1, /4 2-1/4 1-1/4 $2, / /2 $2, /4 3-1/2 2 $4, / /2 $7, B B /2 4-3/4 3 $9, B B /2 $14, B B /2 4 $17, B B /4 5 $46, B B /8 6 $69, B B /4 Radius Elbows: / /4 same price as 90 * Sizes 2-1/2 and larger shipped in palletized cartons or bulk. Thread protectors applied to each end and WHEATLAND identifying label affixed.

3 NIPPLES Galvanized Rigid Conduit LGTH Close Price Per Price 1-1/2" Std. Price per 2" Std. Price 2-1/2" Std. Size Length 100 Std. Ctn. 100 Per 100 Ctn Ctn. Wt. per 100 per 100 Ctn /2 1/8" $ $ $ $ /4 1 3/8" $ $ $ $ /2" $ $ $ /4 1 5/8" $ $ $ /2 1 3/4" $ $ $ " $ $ /2 2 1/2" $1, /8" $2, /2 2 3/4" $2, /8" $2, " $5, B /8" $7, B LGTH 3" 3-1/2" 4" 5" Size Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn /2 $ $ $ $ /4 $ $ $ $ $ $ $ $ /4 $ $ $ $ /2 $ $ $ $ $ $ $1, $1, /2 $1, $2, $2, $2, $2, $2, $2, $3, / $3, $3, $3, $4, $8, B $10, B 660 LGTH 6" 8" 10" 12" Size Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn /2 $ $ $ $ /4 $ $ $ $1, $ $1, $1, $1, /4 $ $1, $1, $2, /2 $1, $1, $2, $2, $1, $2, $2, $2, /2 $2, $3, $4, $5, $3, $4, $5, $6, /2 $4, $5, $6, $7, $4, $5, $7, $8, $8, B 600 $10, B 8 $12, B 1055 $14, B $11, B 820 $13, B 11 $16, B 1440 $18, B 1720 Special Length nipples up to 12", add 20% to list price of next standard length. For List Price on 4-1/2", 5-1/2", 7", 9", 11" Lengths use next longer length listed, other unlisted lengths see below. Lengths longer than 12" or Special threading: Price on application.

4 Trad e Size 12" Radius SPECIAL LARGE RADIUS 90 ELBOWS Galvanized Rigid Steel Conduit 15" Radius 18" Radius 24" Radius 30" Radius Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. 1 $ $ $ $ $ /4 $ $ $ $ $ /2 $ $ $ $ $ $ $ $ $ $ /2 POA 15 $ $ $ $ $ $ $ $ / Radius --- $ $ $ $ $ $ Radius --- $ Radius --- Trad e Size 36" Radius 42" Radius 48" Radius 60" Radius Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. 1 $ $ $ /4 $ $ $ /2 $ $ $ $ $ $ /2 $ $ $ $ $ $ /2 $ $ $ $ $ $ $ $ $1, $1, $ $1, $1, $1, Special Large Radius Elbows: / /4 same price as 90 WEIGHTS for and Special Large Radius 90 elbows are approximate. To estimate weight for 60, same as 90, for and 11-1/4 deduct 35% from 90. Underwriters Laboratories, Inc. UL 6, American National s, C80.1, and Federal Specifications WW C 581d and WF 408b apply where applicable. Dimensions of Special Large Radius 90 Elbows Size 1-2-1/ When Radius "A" is: 12" 15" 18" 24" 30" 36" 42" 48" Offset "C" is: 1'9" 2'0" 2'4" 2'11" 3'5" 3'11" 4'6" 5'0" Straight End "D" is: 9" 9" 10" 11" 11" 11" 12" 12" Length Unbent is: 3'0" 3'6" 4'0" 4'11" 5'9" 6'6" 7'6" 8'4"

5 SPEEDCOUPLE ELBOWS 90 Galvanized Rigid Conduit* Str. List Price Per Std. Weight-Lbs. Minimum Lgth. Size 100 Ctn. Per Ctn. Per 100 Radius (in.) Each 2 $12, / /2 $20, B B /2 4-3/4 3 $26, B B /2 $36, B B /2 4 $44, B B /4 5 $101, B B /8 Radius Elbows: / /4 same price as 90 * Sizes 2-1/2 and larger shipped in palletized cartons or bulk. Thread protectors applied to each end and WHEATLAND identifying label affixed. Underwriters Laboratories Safety UL-6 and UL-514B. Manufactured in accordance with ANSI C80.1 SPECIAL RADIUS SPEEDCOUPLE ELBOWS 90 Galvanized Rigid Conduit* 12" Radius 15" Radius 18" Radius 24" Radius 30" Radius Size Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. 2 $ $ $ $ $ /2 --- $267. $ $ $ $ $ $ $ / Radius --- $ $ $ $ $ $ $1, " Radius 42" Radius 48" Radius 60" Radius Size Price Each Wt. Price Each Wt. Price Each Wt. Price Each Wt. Lbs. 2 $ $ $ /2 $ $ $ $ $ $ /2 $ $ $ $ $ $ $1, $1, $1, $1, $1, Special Large Radius Elbows: / /4 same price as 90 WEIGHTS for and Special Large Radius 90 elbows are approximate. To estimate weight for 60, same as 90, for and 11-1/4 deduct 35% from 90. Underwriters Laboratories Safety UL-6 and UL-514B. Manufactured in accordance with ANSI C80.1

6 EMT 90 ELBOWS Size List Price Per 100 Carton Weight Per Ctn. Per 100 Minimum Radius (in.) 1/2 $ /4 $ /2 1 $ /4 1-1/4 $1, /4 1-1/2 $1, /4 2 $1, /2 2-1/2 $4, B B /2 3 $6, B B /2 $8, B B $9, B B Radius Elbows: / /4 same price as 90 *Sizes 2-1/2 and larger shipped in palletized cartons or bulk with WHEATLAND identifying label 12" Radius 15" Radius 18" Radius 24" Radius Size Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs $ / $ / $ $ $ $ $ / $ $ / $ " Radius 36" Radius 42" Radius 48" Radius Size Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs $ / $ $ $ /2 $ $ $ $ $ $ $ /2 --- $ $ $ $ / $ $ $ $ $ $ Special Large Radius Elbows: / /4 same price as 90 WEIGHTS for and Special Large Radius 90 elbows are approximate. To estimate weight for 60, same as 90, for 45, 30, 15 and 11-1/4 deduct 35% from 90. Underwriters Laboratories, Inc. UL 797, American National s, C80.3, and Federal Specifications WW C 563 apply where applicable. Dimensions of Special Large Radius 90 Elbows Size When Radius "A" is: SPECIAL LARGE RADIUS 90 ELBOWS Galvanized EMT 1-2 1/ " 15" 18" 24" 30" 36" 42" 48" Offset "C" is: 1'9" 2'0" 2'4" 2'11" 3'5" 3'11" 4'6" 5'0" Straight End "D" is: 9" 9" 10" 11" 11" 11" 12" 12" Length Unbent is: 3'0" 3'6" 4'0" 4'11" 5'9" 6'6" 7'6" 8'4"

7 RIGID STEEL CONDUIT SERVICE MAST Size Net Price Each Std Bundle Qty Wt Per Bundle 2" x 7' GRC M/MST TBE $ " X 7' GRC M/MST TOE $ " X 7' GRC M/MST W/45 DEG $ /2" X 7' GRC M/MST TBE $ /2" X 7' GRC M/MST TOE $ /2" X 7' GRC M/MST W/45 DEG $ RIGID STEEL CONDUIT OFFSET RISER Size Net Price Each Std Bundle Qty Wt Per Bundle 1-1/4" GRC W/6" OFFSET RISER $ " GRC W/6" OFFSET RISER $

8 YARD LIGHT ELBOWS GALVANIZED Size List Price Per 100 Carton Weight Per 100 1/2 $2, /4 $3, $4, /4 $5, /2 $6, Bulk $9, Bulk /2 $12, Bulk $22, Bulk /2 $39, Bulk $50, Bulk 3799 RUNNING THREAD PIPE Rigid Conduit Size List Price Per 100 Ft. Carton Weight Per 100 Ft. 1/4 $2, Bulk 29 3/8 $2, Bulk 42 1/2 $4, Bulk 62 3/4 $4, Bulk 84 1 $8, Bulk /4 $9, Bulk /2 $10, Bulk $13, Bulk 0 2-1/2 $21, Bulk $27, Bulk /2 $33, Bulk $38, Bulk FOOT Lengths: TYPE C Galvanized, Electro-Plated Threads.

9 RIGID ALUMINUM CONDUIT FITTINGS ALL DIMENSIONS ARE PROVIDED FOR DESCRIPTIVE PURPOSES ONLY COUPLINGS Aluminum Rigid Conduit Weight - Lbs. Outside Diameter (in.) Minimum Length (in.) Size List Price Per 100 Std. Ctn. Per Ctn. Per 100 1/2 $ /16 3/4 $ /8 1 $1, /4 $1, /16 1-1/2 $1, /16 2 $2, /8 2-1/2 $5, /8 3 $7, /4 3-1/2 $9, /8 4 $11, /2 5 $40, B B /4 6 $63, B B Manufactured to UL Specifications ELBOWS 90 Aluminum Rigid Conduit* Weight - Lbs. Minimum Size List Price Per 100 Std. Ctn. Per Ctn. Per 100 Radius (in.) 1/2 $1, /4 $2, /2 1 $3, /4 1-1/4 $5, /4 1-1/2 $7, /4 2 $11, /2 2-1/2 $19, B B /2 3 $29, B B /2 $46, B B $54, B B $162, B B $224, B B Radius Elbows: / /4 same price as 90. *Sizes 2-1/2 and larger shipped in palletized cartons or bulk. Thread protectors applied to each end and WHEATLAND identifying label affixed.

10 RIGID ALUMINUM CONDUIT FITTINGS ALL DIMENSIONS ARE PROVIDED FOR DESCRIPTIVE PURPOSES ONLY NIPPLES Aluminum Rigid Conduit LGTH Close 1 1/2" 2" 2 1/2" Std. Size Length Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Ctn /2 1-1/8" $ $ $ $ /4 1-3/8" $1, $1, $1, $1, /2" $1, $1, $1, /4 1-5/8" $1, $1, $1, /2 1-3/4" $2, $2, $2, " $2, $2, /2 2-1/2" $5, /8" $6, /2 2-3/4" $7, /8" $9, " $21, B /8" $26,024. B LGTH 3" 3 1/2" 4 5 Size Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn /2 $1, $1, $1, $1, /4 $1, $1, $1, $1, $1, $1, $1, $2, /4 $2, $2, $2, $3, /2 $2, $3, $3, $3, $3, $3, $3, $4, /2 $5, $6, $6, $7, $8, $8, $8, $9, / $9, $11, $11, $15, $, B $32, B 208 LGTH Size Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn. 100 Price Per 100 Std. Ctn /2 $1, $1, $2, $2, /4 $1, $2, $2, $3, $2, $3, $4, $5, /4 $3, $4, $5, $6, /2 $4, $5, $6, $7, $5, $6, $8, $9, /2 $8, $10, $12, $14, $10, $13, $16, $19, /2 $12, $16, $19, $23, $15, $19, $23, $27, $26, B 197 $33, B 281 $40, B 366 $46, B $35, B 263 $45, B 372 $39, B 481 $59, B 591 Special Length nipples up to 12", add 20% to list price of next standard length For List Price on 4-1/2", 5-1/2", 7", 9", 11" Lengths use next longer length listed, other unlisted lengths see below. Lengths longer than 12" or Special threading: Price on application.

11 March Size SPECIAL LARGE RADIUS 90 ELBOWS Aluminum Rigid Conduit Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. 1 $ $ $ $ /4 $ $ $ $ /2 $ $ $ $ $ $ $ $ / $ $ $ $ $ $ / Radius --- $ $1, $1, $1, Radius Size 12" Radius 15" Radius 18" Radius 24" Radius 30" Radius 36" Radius 42" Radius 48" Radius Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. Price Each Wt. Lbs. 1 $ $ $ $ /4 $ $ $ $ /2 $ $ $ $ $ $ $ $ /2 $ $ $ $1, $ $1, $1, $1, /2 $1, $1, $1, $1, $1, $2, $2, $2, $2, $3, $3, Radius --- $3, $3, $3, Special Large Radius Elbows: / /4 same price as 90. WEIGHTS for and Special Large Radius 90 elbows are approximate. To estimate weight for 60, same as 90 ; for 45, 30, 15 and 11-1/4 deduct 35% from 90. Underwriters Laboratories, Inc. No. UL 6A, American National s Institute. C.80.5, and Federal Specifications WWC 540A apply where applicable. Dimensions of Special Large Radius 90 Elbows Size 1-2-1/ When Radius "A" is: 12" 15" 18" 24" 30" 36" 42" 48" Offset "C" is: 1'9" 2'0" 2'4" 2'11" 3'5" 3'11" 4'6" 5'0" Straight End "D" is: 9" 9" 10" 11" 11" 11" 12" 12" Length Unbent is: 3'0" 3'6" 4'0" 4'11" 5'9" 6'6" 7'6" 8'4"

12 TERMS & CONDITIONS 1. Prices subject to change without notice. Acceptance of quotations shall not impose any duties on Seller until approved by Seller at Seller s General Office,. Approval by Seller is expressly made conditional upon assent by Buyer to all the following Terms and Conditions. Buyer s assent to these Terms and Conditions shall be conclusively presumed from Buyer s receipt of Seller s acknowledgment of Buyer s order without prompt written objection thereto or from acceptance by Buyer of all or any part of the material order. No Terms or Conditions other than those stated herein, whether contained in Buyer s purchase order, shipping release, or elsewhere, shall be binding upon Seller and Seller hereby expressly objects to any such terms. None of the Terms and Conditions contained in this quotation may be waived, added to, modified, superseded, or otherwise altered except by written instrument signed by Seller and delivered by Seller to Buyer. Each shipment and delivery shall be subject to the approval of Seller s Credit Department. 2. Prices charged for the material covered hereby shall be Seller s prices in effect at the time of shipment. 3. All delivered prices or prices with freight allowed are based upon prevailing freight rates and transportation charges, and if these are increased or decreased, such prices on all unshipped tonnage shall be increased or decreased accordingly. Cash discounts apply only on the mill price of the material. Seller shall have the option of shipping freight collect. 4. Seller shall not be responsible for spotting, switching, or drayage charges at destination. Any excises, levies, or taxes which Seller may be required to pay or collect under any existing or future law, upon or with respect to the sales, purchase, delivery, storage, processing, use, consumption, or transportation of any of the materials or services covered hereby, shall be for the account of Buyer, and Buyer agrees to pay the amount thereof to Seller upon request. 5. In the event that Seller s performance is delayed, interfered with, or prevented by war, fire, strike, flood, acts of God, shortages of material, fuel, or power, delay in transportation, equipment breakdowns, riot, theft, differences with workmen or employees, or accident, or by any law, order, regulation, or requisition of any governmental agency or body, or any other cause beyond the control of Seller, Sheller shall, as respects any portion of Seller s performance unperformed by reason of such occurrence, at its option, be relieved from further responsibility, whether or not such cause is operative at the time of Seller s approval of Buyer s order. In the event Seller elects to complete its performance, the time of Seller s performance shall be extended for such period as may be necessary to enable Seller to make delivery after such cause has been removed, and Seller shall have the right to apportion its production among its customers (including Seller s regular customers not then under contract) and Seller s own departments and divisions in any manner Seller deems equitable. 6. LIMITED WARRANTY: Seller agrees to replace or allow credit, at its option, for material found to be defective within a reasonable time but in no event more than one year after receipt by Buyer, but will not be liable for any labor, expense, or damage resulting from the use of such material or in connection therewith. No claim will be recognized unless presented to Seller in writing within a reasonable time, but in no event more than one year after receipt of material by Buyer and unless Seller is promptly afforded a reasonable opportunity to inspect such material after such claim has been presented. Material shall not be returned to Seller unless Seller authorizes such return by prior written notice to Buyer. 7. The remedies provided for in paragraph 6 hereof are exclusive and Seller s liability shall not under any circumstances exceed the purchase price of the material. Seller shall not be liable to Buyer or to anyone else for any claims or for any damages whatsoever, whether direct, indirect, special, consequential, or incidental, except to the extent provided for herein. 8. THERE ARE NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, OTHER THAN THOSE EXPRESSLY SET FORTH HEREIN. ALL OTHER WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, AND ALL WARRANTIES WHICH MIGHT OTHERWISE ARISE FROM COURSE OF DEALING OR USAGE OF TRADE, ARE HEREBY SPECIFICALLY EXCLUDED. 9. BUYER REPRESENTS AND WARRANTS TO SELLER THAT THE MATERIAL IS BEING PURCHASED FOR RESALE OR FOR COMMERCIAL USE AND THAT ANY WARRANTIES GIVEN HEREUNDER ARE NOT SUBJECT TO THE REQUIREMENTS OF THE MAGNUSON-MOSS WARRANTY-FEDERAL TRADE COMMISSION IMPROVEMENT ACT, 15 U.S.C. SECTION 2301 et seq. ANY WARRANTIES HEREUNDER, WHETHER EXPRESS OR IMPLIED, ARE MADE TO BUYER ONLY, AND TERMINATE UPON TRANSFER OF THE MATERIAL TO ANY OTHER PERSON FOR ANY PURPOSE WHATSOEVER. 10. Material shall be within the limits and sizes manufactured by Seller and shall be subject to Seller s standard manufacturing practices. 11. Material purchased on the basis of weight is subject to customary quantity variations recognized by trade practice. 12. Where Buyer wishes to inspect, inspection and acceptance shall be made before shipment. 13. Title to material and risk of loss of the goods shall pass to Buyer when loaded for shipment at Seller s mill. Carriers are responsible for goods lost or damaged in transit and consignee must immediately notify the carrier in writing of such loss or damage. 14. If the terms and conditions of Buyer s order require a patent indemnity and the material covered by such order is to be made in accordance with Seller s specifications, Seller agrees to defend any suit or proceeding brought against Buyer on a claim that the materials or any part thereof constitute an infringement of any patent of the United States, provided Seller is promptly notified in writing of any such suit and given full authority, information, and assistance from the Buyer for the defense of same, and Seller agrees to pay all damages and costs awarded against Buyer in any such suit. Buyer warrants that the making, use, or sale of goods supplied to Buyer s specifications will not infringe any claim of any United States patent whatsoever, and Buyer agrees to indemnify Seller against judgment and costs for infringement of any such claim, including Seller s legal expenses. 15. Material shall be produced in compliance with the requirements of the Fair Labor s Act of 1938, as amended. 16. These Terms and Conditions contain the entire agreement of the parties and are made without any oral warranties, conditions or agreements. 17. Any contract between Seller and Buyer pursuant to these Terms and Conditions shall be governed by the Uniform Commercial Code in effect in Ohio on the date of Seller s acknowledgment. 2%, 10th Prox., Net th Invoices dated from the th of a month through the 24th of the next month are payable less 2% cash discount on the 10th and net on the th of the following month. There is no cash discount on freight.

13 FOB TERMS: All prices are F.O.B. point of shipment. Title of goods shall pass to the buyer upon delivery of the shipment to the carrier. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer's risk. Shipment should be carefully examined upon delivery and before the carrier's delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier's driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. FREIGHT TERMS: All factory shipments 1,000 pounds / $1, or greater will be shipped full freight allowed. Picoma reserves the right to select the carrier to all shipments. MINIMUM CHARGE: $ Notes: On orders received for cartoned items in less than "carton (not container) quantities", we reserve the right to adjust to the next carton quantity above the number of pieces shown on the order. All orders are accepted on the basis of price in effect at time of shipment. To the prices and terms quoted, there will be added any Manufacturer's or Sales Tax payable on the transaction under any effective statute. UPC Numbers are available upon request.