For full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.

Transcription

1 Safety Light Curtains Accessories Lightcurtain For full product information, visit Use the SpeedSpec code or scan the Q Code for quick access to the specific web page. Accessories and Spare Parts for Safety Light Curtains Power Supplies...page 62 eset Switches...page 62 Shock Mount Kits...page 62 Mirrors...page Mirror and Bracket...page 66 Mounting Accessories...page 66 Floor Stands...page 67 Test Objects...page 62 Laser Alignment Tool...page 62 Weld Slag Protective Shields...page 68 IP67 Enclosures...page 69 Power Supplies For use with the STI safety products such as the F3SJ and the MS4800, CE marked, IN-rail mountable, Input: 115 or 230 VAC. S8JX-G05024C S8JX-G10024C eset Switches escription 24 VC power supply, 50 W, 2.1 A 24 VC power supply, 100 W, 4.2 A These switches can be mounted remotely and used to perform the reset function on all STI safety light curtains. Shock Mount Kits These kits are used to isolate light curtain receivers and transmitters from possible sources of vibration. They can also be used to shock-mount controllers/ power supplies and mirrors. Each kit consists of eight mounts. MS/MSF4800 Series MS/MSF4800 Lengths MS/MSF4800 Lengths MS/MSF4800 Lengths Test Objects eplacement test objects can be ordered by part number. Make sure to order the test object for the correct light curtain model. STI-TO20 STI-TO30 STI-TO14 STI-TO40 STI-TO24 STI-TO PA4600 Series PA PA PA PA PA PA PA escription SHMS-18 Shock mounting kit for weight class 2 SHP4-18 Shock mounting kit for weight class 3 and 4 escription Test object, 19.1 mm (0.75 in.) for F3SJ-A_P20 and MS Test object, 30 mm (1.18 in.) for F3SJ-A_P30 and MS Test object, 14 mm (0.55 in.) for F3SJ-A_P14 and MS Test object, 40 mm (1.57 in.) for MS Test object, 24 mm (0.94 in.) for F3SJ-A_P14, amd MS (with floating blanking 1-beam) Test object, 34 mm (1.34 in.) for F3SJ-A_P14 and MS (with floating blanking 2-beam) K-1 K-2 escription Key Switch Assembly, Panel Mount Push Button Switch Assembly, Panel Mount Laser Alignment Tool To assist with long-range alignment of installations. K-2 K-1 46LA escription Laser alignment tool for use with PA4600 and MS LA 62

2 Mirrors The correct mirror is important in maintaining the integrity of a safety light curtain system. Whenever an infrared beam strikes a mirror a certain percentage of the signal will be lost. In order to minimize this loss, glass and stainless steel mirrors from Omron use materials of the highest optical quality. Mirror Material Mirror Material Percentage of range lost per mirror Front eflective Surface Glass 12% Polished Stainless Steel 18% Net ange Using Mirrors (percentage of maximum range) No. of Mirrors Used Material Glass 88% 77% 68% 60% Stainless Steel 82% 67% 55% 45% Glass mirrors are built with front reflective surface glass. This material provides the minimum possible signal loss. For applications where the possibility of broken glass cannot be tolerated, wide, polished stainless steel mirrors are available. STI mirrors are available in both a narrow and a wide package. If space permits, the wide mirrors are recommended for ease of alignment. Narrow mirrors have 51 mm (2 in.) wide reflective surfaces and can be used on applications where space is limited or the range between the light curtain transmitter and receiver is short. Wide mirrors have 108 mm (4.25 in.) wide reflective surfaces and ease alignment on applications with a large perimeter or where there are no space limitations. NOTE: Mirrors can only be mounted using the MIS-xx Series Heavy uty Floor Stands. Weight Weight Length Narrow Glass kg/lb. Wide Glass kg/lb. Wide Stainless Steel* Narrow Stainless Steel* 102 mm (4 in.) MIN-04FG 0.8/1.74 MIW-04FG 1.0/2.3 MIW-04SS MI-04SS-ES 152 mm (6 in.) MIW-06FG 1.3/2.8 MIW-06SS 203 mm (8 in.) MIN-08FG 1.0/2.36 MIW-08FG 1.5/3.3 MIW-08SS MI-08SS-ES 305 mm (12 in.) MIN-12FG 1.4/2.98 MIW-12FG 1.9/4.2 MIW-12SS MI-12SS-ES 406 mm (16 in.) MIN-16FG 1.6/3.60 MIW-16FG 2.4/5.2 MIW-16SS MI-16SS-ES 457 mm (18 in.) MIW-18FG 2.5/5.6 MIW-18SS 508 mm (20 in.) MIN-20FG 1.9/4.22 MIW-20FG 2.8/6.1 MIW-20SS MI-20SS-ES 610 mm (24 in.) MIN-24FG 2.2/4.84 MIW-24FG 3.2/7.1 MIW-24SS MI-24SS-ES 711 mm (28 in.) MIN-28FG 2.5/5.46 MIW-28FG 3.7/8.1 MIW-28SS MI-28SS-ES 762 mm (30 in.) MIW-30FG 3.8/8.5 MIW-30SS 813 mm (32 in.) MIN-32FG 2.8/6.08 MIW-32FG 4.0/9.0 MIW-32SS MI-32SS-ES 913 mm (36 in.) MIN-36FG 3.0/6.70 MIW-36FG 4.5/9.9 MIW-36SS MI-36SS-ES 1016 mm (40 in.) MIN-40FG 3.3/7.32 MIW-40FG 5.0/10.9 MIW-40SS MI-40SS-ES 1067 mm (42 in.) MIW-42FG 5.2/11.4 MIW-42SS 1118 mm (44 in.) MIN-44FG 3.6/7.94 MIW-44FG 5.4/11.9 MIW-44SS MI-44SS-ES 1219 mm (48 in.) MIN-48FG 3.9/8.56 MIW-48FG 5.9/12.9 MIW-48SS MI-48SS-ES 1321 mm (52 in.) MIW-52FG 5.3/13.8 MIW-52SS 1372 mm (54 in.) MIW-54FG 6.5/14.3 MIW-54SS 1422 mm (56 in.) MIW-56FG 6.7/14.8 MIW-56SS 1524 mm (60 in.) MIW-60FG 7.2/15.8 MIW-60SS 1626 mm (64 in.) MIW-64FG 7.6/16.8 MIW-64SS 1830 mm (72 in.) MIW-72FG 8.5/18.6 MIW-72SS 2134 mm (84 in.) MIW-84FG 9.8/21.5 MIW-84SS 2440 mm (96 in.) MIW-96FG 11.0/24.3 MIW-96SS * Consult factory for weights. Use for ES applications 63

3 Mirrors (continued) Narrow Mirror Package (MIN) Narrow Mirror imensions Front eflective Surface Glass imension L imension M MIN-04FG 152/ /7.68 MIN-08FG 254/ /11.68 MIN-12FG 356/ /15.68 MIN-16FG 457/ /19.68 MIN-20FG 559/ /23.68 MIN-24FG 660/ /27.68 MIN-28FG 762/ /31.68 MIN-32FG 864/ /35.68 MIN-36FG 965/ /39.68 MIN-40FG 1067/ /43.68 MIN-44FG 1168/ /47.68 MIN-48FG 1270/ /51.68 CLAMP ASSY INCLUE CLAMP ASSY INCLUE M ia (4 plcs) L Narrow Mirror imensions Stainless Steel eflective Surface imension L imension M MI-04SS-ES 203/ /9.28 MI-08SS-ES 305/ /13.28 MI-12SS-ES 406/ /17.28 MI-16SS-ES 508/ /21.28 MI-20SS-ES 610/ /25.28 MI-24SS-ES 711/ /29.28 MI-28SS-ES 813/ /33.28 MI-32SS-ES 914/ /37.28 MI-36SS-ES 1016/ /41.28 MI-40SS-ES 1118/ /45.28 MI-44SS-ES 1219/ /49.28 MI-48SS-ES 1321/ /53.28 Notes: Use for ES applications. Use mounting kit to mount to STI stands. CLAMP ASSY KIT PAT NUMBE (NOT INCLUE) EVESIBLE BACKETS ia (4 plcs) IF BKT IS INVETE, M = L M L 64

4 Mirrors (continued) Wide Mirror Package (MIW) ia (8 plcs) CLAMP ASSY INCLUE M L CLAMP ASSY INCLUE Wide Mirror imensions Front eflective Surface Glass imension L imension M MIW / /7.18 MIW / /9.18 MIW / /11.18 MIW / /15.18 MIW / /19.18 MIW / /21.18 MIW / /23.18 MIW / /27.18 MIW / /31.18 MIW / /33.18 MIW / /35.18 MIW / /39.18 MIW / /43.18 MIW / /45.18 MIW / /47.18 MIW / /51.18 MIW / /55.18 MIW / /57.18 MIW / /59.18 MIW / /63.18 MIW / /67.18 MIW / /75.18 MIW / /87.18 MIW / /99.18 Wide Mirror imensions Stainless Steel eflective Surface imension L imension M MIW-04SS 140/ /7.18 MIW-06SS 191/ /9.18 MIW-08SS 241/ /11.18 MIW-12SS 343/ /15.18 MIW-16SS 445/ /19.18 MIW-18SS 495/ /21.18 MIW-20SS 546/ /23.18 MIW-24SS 648/ /27.18 MIW-28SS 749/ /31.18 MIW-30SS 800/ /33.18 MIW-32SS 851/ /35.18 MIW-36SS 953/ /39.18 MIW-40SS 1054/ /43.18 MIW-42SS 1105/ /45.18 MIW-44SS 1156/ /47.18 MIW-48SS 1257/ /51.18 MIW-52SS 1359/ /55.18 MIW-54SS 1410/ /57.18 MIW-56SS 1461/ /59.18 MIW-60SS 1562/ /63.18 MIW-64SS 1664/ /67.18 MIW-72SS 1867/ /75.18 MIW-84SS 2172/ /87.18 MIW-96SS 2477/ /

5 45 Mirror and Bracket Use with PA4600 applications using a double-bounce arrangement. MI45-FG and MI45-SS MI45-FG MI45-SS MI45-BKT escription 4 in. front reflective surface glass mirror for use with MI45BKT 4 in. polished stainless steel mirror for use with MI45BKT Bracket for mounting MI45 to STI stand at 45 angle MI45-BKT MIO - STAINLESS STEEL O GLASS TABS (4 PLACES) MIO SUPPOT BLOCK MIO STAN PIPE Mounting Accessories LCMK-4 BSMK MI-BKT escription Allows a transmitter/receiver pair of any model STI light curtain to be mounted to STI stands. Allows mounting of one BeamSafe II transmitter and one BeamSafe II receiver to STI mounting stands. Mirror mounting brackets, will mount to STI stands. LCMK-4 BSMK O LCMK-4 MIO MIO BACKETS MOEL MI-BKT 66

6 Floor Stands Light uty Floor Stands Light curtains and perimeter guards used to detect the torso of personnel have specific mounting requirements per ANSI/IA and other standards. These light duty stands are ideal for mounting the bottom beam of the light curtain or perimeter guard within the required 0.3 m (12 in.) from the floor. The new Light uty Floor Stand is a cost effective alternative to our more robust heavy duty stand, and mounting hardware is included. NOTE: Mirrors cannot be mounted using the Light uty Floor Stands. Use the MIS-xx Series Heavy uty Floor Stands when mounting mirrors. escription Height m/in. PA-STAN-40 Light-uty Floor Stand 1.0/40 PA-STAN-44 Light-uty Floor Stand 1.1/44 PA-STAN-48 Light-uty Floor Stand 1.2/48 PA-STAN-52 Light-uty Floor Stand 1.3/52 PA-STAN-56 Light-uty Floor Stand 1.4/56 PA-STAN-64 Light uty Floor Stand 1.6/64 PA-STAN-72 Light uty Floor Stand 1.8/ Ø T-NUT (ECONO T-SLOT) 1/4-20 T-BOLT ASSY STI BOLT 1/4-20 x 1/2, FBHSCS SENSO MTG BACKET (EF) Heavy uty Floor Stands STI stands provide a stable, secure method for mounting both safety light curtains and mirrors. Hardware for mounting stand to concrete floor is included. NOTE: Mirrors can only be mounted using the MIS-xx Series Heavy uty Floor Stands T-BOLT ASSY STI (X2) C L ENCAP EF SENSO SPECS Height m/ft. Weight kg/lb. MIS /4 8.8/19.3 MIS /6 11.2/24.7 MIS /7 12.5/27.4 MIS /8 13.7/30.1 MIS / /35.4 "XX" INCHES OPTICAL SENSO SENSO BACKETS CAN BE INVETE XX" STAN ASSEMBLY STI XX H O IA (4PLCS)

7 Weld Slag Protective Shields Available for the PA4600, F3SJ, and MS4800 families educes down time and increases the life of the curtain esistant to many chemicals and compounds Easy to install and replace Lexan construction These protective shields are designed to protect the light curtains, when used in harsh applications. In many cases, welding cell applications produce hot weld slag that over time may damage the lens (filter) and degrade the light curtain s performance. These covers offer the user the ability to easily and inexpensively reduce machine down time. The covers are available to fit all sizes. Chemical esistance of Lexan Chemical Class Effects Acids No significant effect under most typical conditions of concentration and temperature. Alcohols L Generally compatible at low concentration and room temperature. Higher concentrations and elevated temperatures can result in etching and attack evidenced by decomposition. Alkalis L Generally compatible at low concentration and room temperature. Higher concentrations and elevated temperatures can result in etching and attack evidenced by decomposition. Aliphatic Hydrocarbons Generally compatible. Amines N Surface crystallization and chemical attack. Aromatic Hydrocarbons N Partial solvents and severe stress cracking agents (i.e. xylene, toluene). etergents and Cleaners L Mild soap solutions are generally compatible. etergents and Cleaners, N with Alkaline Materials Esters N Cause severe crystallization. Partial solvents. Greases and Oils L Pure petroleum types generally compatible. Halogenerated Hydrocarbons N Solvents. Ketones N Cause severe crystallization and stress cracking. Partial solvents. Silicone Oil and Greases L Generally compatible up to 85 C (185 F). Silicone Oil and Greases, with Alkaline Materials N imensions KEY: - esistant L - Limited esistance N - Not esistant Notes: Lexan is a registered trademark of G.E. General Electric Corp. Certain combinations of chemical environments, temperature and stress can adversely affect thermoplastic parts made from LEXAN resin. For this reason, lubricants, gaskets, O-rings, cleaning solvents, or any other material which may come in contact with the finished part must be carefully evaluated under end-use conditions for compatibility. You should also follow the use and compatibility recommendations of the manufacturer of any such material. LEXAN resin generally is stable to water, mineral acids and organic acids. Crazing and/or embrittlement may occur if a part molded from LEXAN resin is highly stressed and exposed to hot water or a moist high-temperature environment. As a result, a temperature limit of 60 to 71 C (140 to 160 F) is recommended under these conditions. PA4600 Perimeter Access Guarding evice MS4800 Light Curtain (L.C.) TOP VIEW Weld Guard TOP VIEW Weld Shield (W.S.) Length = L.C..Z L.C. etection Zone (.Z.) SIE VIEW FONT VIEW SIE VIEW 68

8 Weld Slag Protective Shields (continued) escription Lexan Weld Shield Kit for PA4600 PA4600WS-1 PA4600WS-2 PA4600WS-4 Lexan Weld Shield Kit for MS4800* PA weld shield kit (1 pair) PA4600 weld shield kit (1 pair) PA4600 weld shield kit (2 pairs) 135/ / /7.1 MS4800WS mm Kit 270/10.63 MS4800WS mm Kit 310/12.21 MS4800WS mm Kit 350/13.78 MS4800WS mm Kit 390/15.35 MS4800WS mm Kit 430/16.93 MS4800WS mm Kit 470/18.50 MS4800WS mm Kit 510/20.08 MS4800WS mm Kit 550/21.65 MS4800WS mm Kit 590/23.23 MS4800WS mm Kit 630/24.80 MS4800WS mm Kit 670/26.38 MS4800WS mm Kit 710/27.95 MS4800WS mm Kit 750/29.53 MS4800WS mm Kit 790/31.10 MS4800WS mm Kit 830/32.68 MS4800WS mm Kit 870/34.25 MS4800WS mm Kit 910/35.83 MS4800WS mm Kit 950/37.40 MS4800WS mm Kit 990/38.98 MS4800WS mm Kit 1030/40.55 MS4800WS mm Kit 1070/42.13 escription MS4800WS mm Kit 1110/43.70 MS4800WS mm Kit 1150/45.28 MS4800WS mm Kit 1190/46.85 MS4800WS mm Kit 1230/48.43 MS4800WS mm Kit 1270/50.00 MS4800WS mm Kit 1310/51.57 MS4800WS mm Kit 1350/53.15 MS4800WS mm Kit 1390/54.72 MS4800WS mm Kit 1430/56.30 MS4800WS mm Kit 1470/57.87 MS4800WS mm Kit 1510/59.45 MS4800WS mm Kit 1550/61.02 MS4800WS mm Kit 1590/62.60 MS4800WS mm Kit 1630/64.17 MS4800WS mm Kit 1670/65.75 MS4800WS mm Kit 1710/67.32 MS4800WS mm Kit 1750/68.90 MS4800WS mm Kit 1790/70.47 MS4800WS mm Kit 1830/72.05 MS4800WS mm Kit 1870/73.62 MS4800WS mm Kit 1910/75.20 MS4800WS mm Kit 1950/76.77 MS4800WS mm Kit 1990/78.35 MS4800WS mm Kit 2030/79.92 MS4800WS mm Kit 2070/81.50 MS4800WS mm Kit 2110/83.07 MS4800WS mm Kit 2150/84.65 *MS4800 weld shield kits consists of one pair. IP67 Enclosures for Mounting Safety Light Curtains in Wash-down Applications Available in the full range of sizes educes down time and increases the life of the light curtain esistant to many chemicals and compounds (see tables on subsequent pages) Improved mounting system einforced stainless steel brackets The IP67 Enclosure is designed for washdown applications. The enclosure is constructed with an acrylic tube. The brackets are made of stainless steel. The radial seal prevents fluids from coming in contact with the safety light curtain. Operating characteristics of the light curtain are affected by the enclosure. The range is reduced by 10% and the effective aperture angle changes to less than ±3. 69

9 IP67 Enclosures (continued) imensions MS4800 IP67 Enclosure 98.5 [3.88] TOP VIEW [5.43] [4.39] 7.0 [0.28] 93.5 [3.68] 82.5 [3.25] 61.5 [2.42] 26.5 [1.04] NOTE: "B1" & "B2". BACKETS CAN BE INVETE. "B1" ±4mm "A" (ETECTION ZONE) "B2" ±4mm MTG 80.0 [3.15] 37.0 [1.46] 93.0 [3.66] 72.0 [2.83] [4.09] [5.01] EF 52.1 [2.05] FONT VIEW SIE VIEW IP67 Enclosures for MS4800 (non-cascaded versions) MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP MS4800-IP Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm Kit for MS mm 70

10 IP67 Enclosures (continued) imensions MSF4800 IP67 Enclosure 98.5 [3.88] TOP VIEW [5.43] 18.6 [0.73] [4.39] 7.0 [0.28] [4.07] [4.51] [5.19] EF 82.5 [3.25] 47.5 [1.87] NOTE: "B1" & "B2". BACKETS CAN BE INVETE. "B1" ±4mm LAST SEGMENT "C" "A" (ETECTION ZONE) FIST SEGMENT "B2" ±4mm MTG 80.0 [3.15] 18.6 [0.73] 37.0 [1.46] 52.1 [2.05] FONT VIEW 93.0 [3.66] 72.0 [2.83] [4.09] [5.01] EF SIE VIEW MI SEGMENT IP67 Enclosures for MSF4800 (cascaded versions) MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP MSF4800-IP Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm Kit for MSF mm 71

11 IP67 Enclosures (continued) Chemical esistance of Acrylic Tube Ether Ethyl acetate Ethyl alcohol, absolute N N N Stearic acid Sulphur Sulphur dioxide, liquid N Nitrogen peroxide Oxygen Ozone KEY: - esistant L - Limited esistance N - Not esistant PAINT Acrylic paints and lacquers L Aromatic-free hydrocarbons Nitrocellulose N Oil paints, pure Thinners, general N CHEMICAL POCESS BATHS Electroplating baths Photographic baths BUILING MATEIALS AN POTECTIVE AGENTS FO BUILINGS Bituminous emulsion N Cement Hot bitumen L Mortar Plaster of paris ed lead CHEMICALS, SOLVENTS, ETC. Acetic acid, glacial N Acetic acid, to 25% L Acetone N Alum Aluminium chloride Aluminium oxalate Aluminium sulphate Ammonia, aqueous solution Ammonium sulphate Amyl acetate N Aniline N Arsenic Arsenic acid Battery acid Benzaldehyde N Benzene N Bromine N Butanol L Butyl lactate N Butyric acid, to 5% Calcium chloride Calcium hypochlorite Carbon disulfide N Carbon tetrachloride N Chlorinated hydrocarbons N Chlorine, liquid N Chlorine, water L Chloroethyl acetate N Chlorophenol N Chromic acid L Citric acid, to 20% Copper sulphate Cresol N Cyclohexane iacetone alcohol N iamyl phthalate L ibutyl phthalate N iethylene glycol ioxan N Ethyl alcohol, to 30% Ethyl bromide Ethyl butyrate Ethylene bromide Ferric chloride Ferrous chloride Ferrous sulphate Formic acid, to 2% Formic acid, to 40% Glycerol Glycol Heptane Hexane Hydrochloric acid Hydrogen peroxide, over 40% Hydrogen peroxide, to 40% Iodine Isopropyl alcohol, to 50% Lactic acid, to 80% Magnesium chloride Magnesium sulphate Manganese sulphate Mercury Methanol, absolute Methanol, to 30% Methyl ethyl ketone Methylated spirits Milk of lime Monobromonaphthalene Motor fuel benzene-free Motor fuel, with benzene Nickel sulphate Nitric acid, to 20% Nitric acid, 20-70% Nitric acid, over 70% Oxalic acid Paraffin Perchloroethylene Petroleum ether Phenols Phosphoric acid, to 10% Phosphorus trichloride Phosphorus, yellow Picric acid, 1% in water Potassium bichromate Potassium carbonate Potassium chloride Potassium cyanide Potassium hydroxide Potassium nitrate Pottassium permanganate Silicon tetrachloride Silver nitrate Soap solution Soda Sodium bisulphite Sodium carbonate Sodium chlorate Sodium chloride Sodium hydroxide Sodium hypochlorite Sodium sulphate Sodium sulphide L N N N L L L L N L N N N L N L N N N N N Sulphuric acid, to 30% Sulphurous acid, conc L Sulphurous acid, to 5% Sulphuryl chloride Tartaric acid, to 50% Thionyl chloride N Tin chloride Toluene N Triethylamine Trichloroacetic acid N Tricresyl phosphate Turpentine L Turpentine substitute L Urea, to 20% Xylene N Zinc sulphate, aqueous Zinc sulphate, solid ISINFECTANTS Bleaching powder Carbolic acid N Hydrogen peroxide, to 40% Hydrogen peroxide, over 40% L Iodine tincture, 5% N Lugol solution Mercuric chloride Surgical spirit N GEASES, OILS, WAXES Animal Mineral Silicone oil L Vegetable L PLASTICS Foams Foams, containing plasticizer N Polyamide Polyethylene PVC PVC, plasticized N ubber ubber, containing plasticizer N FOOSTUFFS, SPICES Aniseed, bay, nutmeg Cloves N Honey, pure Ice cream Marinades Meat and fish Pepper, cinnamon, onions Salt GASES AN VAPOS Ammonia Bromine vapor (dry) L Carbon dioxide Carbon monoxide Chloride vapor (dry) L Exhaust gases, containing HCI Exhaust gases, containing HF Exhaust gases, containing Sulphuric acid Hydrogen sulphide Methane Nitric oxide Sulphur dioxide (dry) Natural Gas (Butane) FEON TG* trichlorotrifluoroethane N FEON TF* trichlorotrifluoroethane BEVEAGES, etc. Beer, wine Camomile extract Chocolate Fruit juice, milk, coffee Spirits, to 30% Vinegar Water, mineral waters Glycerol Hair setting lotion Nail varnish N Nail varnish remover N Ointments Peat water Sea water Soaps Sprays L CLEANING AGENTS Acids, see under chemicals Alcohol, absolute N Alcohol, to 30% Alkalis, see under chemicals Ammonia Aqueous hypochlorite solution Carbon tetrachloride N Methylated spirits N Parafin L Perchlorethylene N Petrol, pure Petrol mixture, containing benzene N Petroleum ether Soap solution Soda solution Solvent stain removers N Trichloroethylene N Turpentine L Turpentine substitute L PEST CONTOL AGENTS Aqueous solutions of pesticides L Stable spray-new Sprays (for direct spraying) L POTECTIVE (strippable) COATINGS Sign Strip ** strippable masking L MISCELLANEOUS Urine * Trademark of E.I. dupont denemours & Company, Inc. ** Trademark of Spraylat Corp., Mt. Vernon, NY 72