This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
|
|
|
- Caroline Davis
- 6 years ago
- Views:
Transcription
1 This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Tradename/Synonym : TE3970 Product Use : Coatings, For industrial use only. Restrictions on use : Do not use in medical applications involving permanent implantation in the human body., See Section 16 Manufacturer/Supplier : The Chemours Company FC, LLC 1007 Market Street Wilmington, DE United States of America Product Information : CHEM (outside the U.S ) Medical Emergency : (outside the U.S ) Transport Emergency : CHEMTREC: (outside the U.S ) SECTION 2. HAZARDS IDENTIFICATION Product hazard category Serious eye damage/eye irritation Category 2A 1 / 13
2 Label content Pictogram : Signal word : Warning Hazardous warnings : Causes serious eye irritation. Hazardous prevention measures : Wash skin thoroughly after handling. Wear eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention. Other hazards The thermal decomposition vapours of fluorinated plastics may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco., Repeated episodes of polymer fume fever may result in persistent lung effects. The following percentage of the mixture consists of ingredient(s) with unknown acute toxicity: 3.15 % SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Component CAS-No. Concentration 2 / 13
3 Polyoxyethylene alkylether % Non-hazardous ingredients Polytetrafluoroethylene % Any component and/or concentration (exact percentage) not specifically identified is considered a trade secret. SECTION 4. FIRST AID MEASURES General advice Inhalation Skin contact Eye contact Ingestion : Never give anything by mouth to an unconscious person. If breathing is irregular or stopped, administer artificial respiration. If symptoms persist, call a physician. : Remove person to fresh air. If signs/symptoms continue, get medical attention. Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. : Take off contaminated clothing and shoes immediately. Wash off immediately with soap and plenty of water. : Rinse thoroughly with plenty of water, also under the eyelids. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. : If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. Get medical attention. 3 / 13
4 Most important symptoms/effects, acute and delayed Protection of first-aiders : Eye contact may provoke the following symptoms: Pain, tearing, swelling, redness, or temporary visual impairment. Inhalation of decomposition products in high concentration may cause shortness of breath (lung oedema). The thermal decomposition vapours of fluorinated plastics may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco. : If potential for exposure exists refer to Section 8 for specific personal protective equipment. Notes to physician : Treat symptomatically. SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media Unsuitable extinguishing media Specific hazards : Water spray, Carbon dioxide (CO2), Foam, Dry chemical : Difficult to ignite, and flame goes out when initiating source is removed. Hazardous thermal decomposition products: Hydrogen fluoride toxic or highly toxic fluorides Carbon monoxide Hazardous thermal decomposition products: Fluorinated compoundshydrofluoric acid...%, Carbon monoxide. Special protective equipment for firefighters : Wear self-contained breathing apparatus and protective suit. Wear neoprene gloves during cleaning up work after a fire. Further information : Protect from hydrogen fluoride fumes which react with water to form hydrofluoric acid. 4 / 13
5 SECTION 6. ACCIDENTAL RELEASE MEASURES NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up. Safeguards (Personnel) Environmental precautions Spill Cleanup : Refer to protective measures listed in sections 7 and 8. Material can create slippery conditions. : Prevent material from entering sewers, waterways, or low areas. Should not be released into the environment. : Clean contaminated floors and objects thoroughly while observing environmental regulations. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum. Contain spillage, soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations (see section 13). Accidental Release Measures : For disposal considerations see section 13. SECTION 7. HANDLING AND STORAGE Handling (Personnel) : Avoid contact with skin, eyes and clothing. Avoid inhalation of vapour or mist. General precaution for all plastics and elastomers: Provide appropriate exhaust ventilation at dryers, machinery and at places where dust or volatiles can be generated. Do not contaminate tobacco products. Wash hands before breaks and immediately after handling the product. Do not breathe vapours or spray mist. Handling (Physical Aspects) Dust explosion class Storage : Provide appropriate exhaust ventilation at machinery. : No special restrictions on storage with other products. Keep away from tobacco products. Do not freeze. 5 / 13
6 Storage period Storage temperature : C (50-81 F) SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering controls : Use local exhaust to completely remove vapors and fumes liberated during hot processing from the work area. Use sufficient ventilation to keep employee exposure below recommended limits. Personal protective equipment Respiratory protection Hand protection Hand protection Eye protection Skin and body protection : In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit. : Additional protection: Impervious gloves : Additional protection: When handling hot material, use heat resistant gloves. : Safety glasses with side-shields Wear coverall chemical splash goggles and face shield when the possibility exists for eye and face contact due to splashing or spraying of material. : Wear as appropriate: Apron Boots Chemical-resistant gloves Exposure Guidelines Exposure Limit Values Polytetrafluoroethylene No applicable data available. Polyoxyethylene alkylether No applicable data available. 6 / 13
7 Non-Constituent(s) Dust (inhalable and respirable fraction) Permissible exposure limit: (OSHA) 5 mg/m3 8 hr. TWA Respirable fraction. Permissible exposure limit: (OSHA) 15 mg/m3 8 hr. TWA Total dust. TLV (ACGIH) 3 mg/m3 TWA Respirable particles. TLV (ACGIH) 10 mg/m3 TWA Inhalable particles. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state : liquid Form : liquiddispersion Color : milky Odor Odor threshold : slight, ammoniacal ph : 9-11 Melting point/freezing point Boiling point/boiling range : Melting point/range C ( F) : Boiling point/boiling range 100 C (212 F) Water Flash point : does not flash 7 / 13
8 Evaporation rate Flammability (solid, gas) Upper explosion limit Lower explosion limit Vapour Pressure Vapour density Density Specific gravity (Relative density) Water solubility Solubility(ies) Partition coefficient: n- octanol/water : g/cm3 : Solids are insoluble., Dispersion may be diluted. Auto-ignition temperature : C Ignition temperature : C Decomposition temperature Viscosity, kinematic Viscosity, dynamic % Volatile : % Water Limiting oxygen index : > 95 % 8 / 13
9 SECTION 10. STABILITY AND REACTIVITY Reactivity : Decomposes on heating. Chemical stability : Stable under recommended storage conditions. Possibility of hazardous reactions Conditions to avoid : Avoid heating for prolonged periods above the recommended upper processing limit. Incompatible materials Hazardous decomposition products : Hazardous thermal decomposition products may include: Fluorinated hydrocarbons, Carbonyl fluoride, Hydrogen fluoride SECTION 11. TOXICOLOGICAL INFORMATION Eye irritation : Eye irritation, In Vitro - Bovine Polyoxyethylene alkylether Dermal LD50 : 4,971 mg/kg, Rabbit Oral LD50 : 3,620 mg/kg, Rat Skin irritation : No skin irritation, Rabbit Repeated dose toxicity : Oral Rat - No toxicologically significant effects were found., Information given is based on data obtained from similar substances. 9 / 13
10 Mutagenicity : Did not cause genetic damage in cultured bacterial cells. Polytetrafluoroethylene Inhalation : The thermal decomposition vapours of fluorinated plastics may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco. Oral LD50 : > 11,280 mg/kg, Rat Skin irritation : No skin irritation, Rabbit No skin irritation, human Skin sensitization : Does not cause skin sensitisation., human Patch test on human volunteers did not demonstrate sensitisation properties. Repeated dose toxicity : Oral - feed Rat - No toxicologically significant effects were found. Carcinogenicity : Not classifiable as a human carcinogen. Mutagenicity : Tests on bacterial or mammalian cell cultures did not show mutagenic effects. Reproductive toxicity : No toxicity to reproduction Further information : The substance is a polymer and is not expected to produce toxic effects. Carcinogenicity The carcinogenicity classifications for this product and/or its ingredients have been determined according to HazCom 2012, Appendix A.6. The classifications may differ from those listed in the National Toxicology Program (NTP) Report on Carcinogens (latest edition) or those found to be a potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest edition). 10 / 13
11 None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, or OSHA, as a carcinogen. SECTION 12. ECOLOGICAL INFORMATION Aquatic Toxicity Polyoxyethylene alkylether 96 h LC50 : Pimephales promelas (fathead minnow) 39 mg/l 48 h EC50 : Daphnia magna (Water flea) 81.2 mg/l Polytetrafluoroethylene : The substance is a polymer and is not expected to produce toxic effects. Environmental Fate Polyoxyethylene alkylether Biodegradability : Not biodegradable SECTION 13. DISPOSAL CONSIDERATIONS Waste disposal methods - Product : Preferred option for disposal is to separate solids from liquid by precipitation and decanting or filtering. Dispose of dry solids in a landfill that is permitted, licensed or registered by a state to manage industrial solid waste. Discharge liquid filtrate to a wastewater treatment system. Incinerate only if incinerator is capable of scrubbing out hydrogen fluoride and other acidic combustion products. Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or disposal. 11 / 13
12 SECTION 14. TRANSPORT INFORMATION Not classified as dangerous in the meaning of transport regulations. SECTION 15. REGULATORY INFORMATION TSCA : On the inventory, or in compliance with the inventory SARA 313 Regulated Chemical(s) PA Right to Know Regulated Chemical(s) California Prop. 65 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. : Substances on the Pennsylvania Hazardous Substances List present at a concentration of 1% or more (0.01% for Special Hazardous Substances): Polytetrafluoroethylene : WARNING! This product contains a chemical or chemicals known to the State of California to cause cancer.tetrafluoroethylene SECTION 16. OTHER INFORMATION Restrictions for use : Do not use or resell Chemours materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless agreed to by Seller in a written agreement covering such use. For further information, please contact your Chemours representative. Chemours and the Chemours Logo are trademarks of The Chemours Company. Before use also read the following bulletin(s): Fluoropolymer Safe Handling Guide published by the Society of the Plastics Industry. 12 / 13
13 Revision Date : 02/09/2016 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Significant change from previous version is denoted with a double bar. 13 / 13
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PFA Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox 280 Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Nafion PFSA 10% Dispersions D1021
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox GPL 29(X) Series
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox GPL 29(X) Series
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PFA Fluoropolymer resin antistatic C-980
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PFA Fluoropolymer resin antistatic C-980
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
GENUINE DTG WHITE INK PRETREATMENT SOLUTION
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET PRODUCT NAME: Virkon S AS SOLD BY VETOQUINOL CANADA A Service of This SDS adheres to the standards and regulatory requirements of Canada and may not meet the regulatory requirements
PerfeCTa qpcr ToughMix, Low ROX
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Manufacturer or supplier's details Company : Quanta BioSciences, Inc. 202 Perry Parkway, Suite 1 Gaithersburg, MD 20877 USA Telephone : + 1
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Ti-Pure Titanium Dioxide Pigment - Paint Coatings - Dry Grades
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ARTISTRI P5100+ CYAN PIGMENT INK
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
MSDS Number: : F
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Bostik, Inc. Address : 198 Nexus Drive Dalton GA 30721 Telephone : (800) 367-4583 Telefax
SAFETY DATA SHEET KEYSTONE HIGH TEMP GRILL CLEANER
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable Recommended use : Grill Cleaner Restrictions on use : Reserved for industrial and professional
Coated glass faced polyiso board
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : GoBoard Chemical nature : Finished cellular plastic foam product Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box
SHAW 4100 REXCOURT/VINYL FLOORING ADH
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Shaw Industries Address : 616 East Walnut Avenue Dalton GA 30721 Telephone : (706)
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET PRODUCT NAME: Virkon Greenhouse AS SOLD BY VETOQUINOL CANADA A Service of This SDS adheres to the standards and regulatory requirements of Canada and may not meet the regulatory
SAFETY DATA SHEET STIX 800 PROFESSIONAL GRADE MULTI PURP ADH
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Bostik, Inc. Address : 198 Nexus Drive Dalton GA 30721 Telephone : (800) 367-4583 Telefax
Fiberglass-Reinforced, Asphalt-Coated Ply Sheets IV
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : GlasPly IV, GlasPly Premier Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA 80127 Telephone
APPLIED BIOCHEMISTS NO FOAM Version 1.0 SDS Number: Revision Date:
SECTION 1. IDENTIFICATION Product name : Product code : 000000024436 Manufacturer or supplier's details Company : Arch Chemicals, Inc. 1200 Bluegrass Lakes Parkway Alpharetta, GA 30004 United States of
MSDS Number: : F
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Forbo Flooring NA Address : Humbolt Industrial Park 8 Maplewood Drive Hazelton PA 18202
SAFETY DATA SHEET. Product name : KEYSTONE WATER BASED STAINLESS STEEL POLISH. Restrictions on use : Reserved for industrial and professional use.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable Recommended use : Metal polish Restrictions on use : Reserved for industrial and professional
MBR Flashing Cement Base
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : MBR Flashing Cement Base Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA 80127 Telephone :
McCabe Gasoline Level Indicator Paste. Safety Data Sheet
Product Identifier Trade Name: Item Number(s): MC 200 Relevant Identified Uses of the Substance or Mixture: Detects gasoline and other light hydrocarbon levels in storage tanks. Date Prepared: April 1,
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Issue Date: 29-Oct-2012 Revision Date: 02-Nov-2012 Version 1 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION. Physical State Liquid
Safety Data Sheet Issue Date: 29-Oct-2012 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Speed Dry OWENS-03 Recommended use of the chemical and restrictions
: May cause slight irritation to the skin.
Date of issue: 07/01/2015 Version: 2.0 SECTION 1: Product and Company Identification 1.1. Product identifier Product name : 1.2. Relevant identified uses of the substance or mixture and uses advised against
MSDS Number: : F
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Bostik, Inc. Address : 198 Nexus Drive Dalton GA 30721 Telephone : (800) 367-4583 Telefax
SAFETY DATA SHEET DISHWASHING DETERGENT
Section: 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Recommended use : Detergent Supplier Name : Reward Distribution (Abn 40 010 183 669) Address : 13 Business Street, Yatala, Qld, 4207 Telephone:
MASLAND MODULAR TILE ADHESIVE
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Masland Contract Address : 716 Bill Myles Drive Saraland, AL 36571 Telephone : (251)
Progress Maintenance, Inc. Telephone Number: W. Fulton Street Chicago, IL 60612
Safety Data Sheet Issue Date: May 17, 2017 Revision Date: September 1, 2017 Version: #3 1. Identification Product Identifier Purple Magic-Metal Cleaner (Concentrate) Other Means of Identification Product
JM Roofing System Urethane Adhesive, Part 2.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : JM Roofing System Urethane Adhesive, Part 2. Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA
Issue Date: 26-Jan-2009 Revision Date: 14-Oct-2014 Version 1 1. IDENTIFICATION. Foaming Glass Cleaner. 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 26-Jan-2009 Version 1 1. IDENTIFICATION Product Identifier Product Name Aerosol Winda-Shine Other means of identification SDS # CARROLL-164 Product Code 803 Recommended use
MSDS Number: : F
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : GoHaus Address : 1501 Front Street #115 San Diego, CA 92101 Telephone : (844) 334-2877
: PLANT HEALTH technologies Volare DC
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : M77704 1.2. Relevant identified uses of the
Weather Protective Coating
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : Insulkote ET Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA 80127 Telephone : +1 303-978-2000
: AprilFresh TLC Hand and Massage Lotion
Date of issue: 09/14/2016 Version: 2.0 SECTION 1: Product and Company Identification 1.1. Product identifier Product name : 1.2. Relevant identified uses of the substance or mixture and uses advised against
WINDEX MINI CONCENTRATE GLASS & SURFACE CLEANER
1. PRODUCT AND COMPANY IDENTIFICATION Product information Product name : WINDEX MINI CONCENTRATE GLASS & SURFACE CLEANER Recommended use : Hard Surface Cleaner Manufacturer, importer, supplier : S.C. Johnson
: BIO 101 Bio-Zyme Cleaner/Deodorant
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 155-5191 : 1.2. Relevant identified uses of the substance or mixture and uses
SAFETY DATA SHEET KEYSTONE APEX PRESOAK
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable Recommended use : Presoak Restrictions on use : Reserved for industrial and professional use.
Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 09/09/2015
Date of issue: 09/09/2015 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification : Mixture : : : /5, /55 1.2. Relevant identified uses of the
Safety Data Sheet W1013N No-Toil Biodegradable Foam Filter Cleaner
Section 1 PRODUCT AND COMPANY IDENTIFICATION Product Number: NAPA 4341, NAPA PS4341, NT-03 / NT-20 Trade Name and Synonyms: Chemical Name and Synonyms: Sodium Salt based Foam Filter Cleaner. Product Use:
SAFETY DATA SHEET GEL STAIN REMOVER
Section: 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable. Recommended use : Cleaning product Restrictions on use : Reserved for industrial and professional
REVISION DATE: 02/07/2014 SUPERCEDES: 06/01/2009. MSDS Number: SYNONYMS: CHEMICAL FAMILY: None DESCRIPTION / USE None established
FOR ANY EMERGENCY, 24 HOURS / 7 DAYS, CALL: FOR ALL TRANSPORTATION ACCIDENTS, CALL CHEMTREC : FOR ALL MSDS QUESTIONS & REQUESTS, CALL: 1-800-654-6911 (OUTSIDE USA: 1-423-780-2970) 1-800-424-9300 (OUTSIDE
SAFETY DATA SHEET BRILLIANT STAINLESS STEEL POLISH
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : not applicable Recommended use : Cleaning product Restrictions on use : Reserved for industrial and professional
SAFETY DATA SHEET ECOSPHERE SMOKE GUARD
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable Recommended use : Air Freshener Restrictions on use : Reserved for industrial and professional
: Potassium Iodide, 10% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
ZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification
ZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification Manufacture/Supplier : Anti-Seize Technology 2345 N. 17 th Ave. Franklin Park, IL 60131
SAFETY DATA SHEET GREASE EXPRESS HIGH TEMP GRILL CLEANER
Section: 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable. Recommended use : Grill Cleaner Restrictions on use : Reserved for industrial and professional
JM One-Part Pourable Sealer
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : JM One-Part Pourable Sealer Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA 80127 Telephone
SAFETY DATA SHEET GUARDIAN SAFE PLUS
Section: 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : Not applicable. Recommended use : Machine Warewashing Detergent Product dilution information : 0.15 % - 0.5
: Phosphate Standard, 1000ppm PO4
Date of issue: 08/09/2013 Revision date: 08/10/2016 Supersedes: 08/09/2013 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Phosphate Standard,
Sodium Diethyldithiocarbamate Trihydrate
Material Safety Data Sheet Sodium Diethyldithiocarbamate Trihydrate 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Sodium diethyldithiocarbamate trihydrate Product Use: Industrial, Manufacturing or
Safety Data Sheet. Zinc Sulfate, 22% In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)
Safety Data Sheet Zinc Sulfate, 22% 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Zinc Sulfate, 22% Synonyms/Generic Names: None Product Number: 6116 Product Use: Industrial, Manufacturing or Laboratory
Sodium Acetate, Anhydrous, ACS
Safety Data Sheet Sodium Acetate, Anhydrous, ACS 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Sodium Acetate, Anhydrous, ACS Synonyms/Generic Names: Acetic acid, sodium salt Product Number: 4785
SAFETY DATA SHEET FIXER HARDENER 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDOUS IDENTIFICATION
FIXER HARDENER 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Manufacturer: Photo Systems, Inc. 7200 Huron River Dr., Dexter, MI 48130 Product Name: FIXER HARDENER Product Number: 154020, 804-0054-46 Product
: Fluoride Standard, 1000 ppm
Date of issue: 04/19/2013 Revision date: 07/14/2016 Supersedes: 04/19/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Fluoride Standard,
: Focus MP 11 Multi-Purpose Cleaner
SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 04/15/2015 : Mixture Product code : 155-2101 : 1.2. Relevant identified uses of the substance or mixture and uses
Sodium Chloride Crystal USP
Safety Data Sheet Sodium Chloride Crystal USP 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Sodium Chloride Crystal USP Synonyms/Generic Names: Sodium Chloride Product Number: 4980 Product Use: Industrial,
Safety Data Sheet. Hazard Statements Causes skin irritation. Causes serious eye damage. Appearance White Physical state Powder Odor Mild
Dry Step Sodium Percarbonate Floor Treatment Section 1 Product Description Product Name: Recommended Uses: Synonyms: Distributor: Chemical Information: Emergency: Chemtrec 1.800.424.9300 Dry Step Sodium
Safety Data Sheet. Hazard Statements Causes skin irritation. Causes serious eye damage. Appearance White Physical state Powder Odor Mild
Dry Step Sodium Percarbonate Floor Treatment Section 1 Product Description Product Name: Recommended Uses: Synonyms: Distributor: Chemical Information: Emergency: Chemtrec 1.800.424.9300 Dry Step Sodium
Safety Data Sheet - Atlas Encapsulate Primer
Safety Data Sheet - Atlas Encapsulate Primer Version 1.0 Revision Date: 08/18/2015 MSDS Number: F000001825 Date of last issue: --------------- Date of first issue: 08/18/2015 SECTION 1. IDENTIFICATION
Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date: 04/15/2015
SECTION 1: Identification 1.1. Identification Product form Product name Magic Mist Revision date: 04/15/2015 : Mixture : Magic Mist Product code : 155-8931 1.2. Relevant identified uses of the substance
ACS Material LLC. Safety Data Sheet Expandable Graphite. Version: 1.2 / EN Revision Date: 05/03/2017
Version: 1.2 / EN Revision Date: 05/03/2017 SECTION 1: IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY 1.1 Product identifiers Product Name : ACS Material Expandable Graphite Brand : CAS-No. : 7782-42-5
: Potassium Iodide, 2% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING. Infotrac 24 Hour Emergency Contact
SAFETY DATA SHEET Issuing Date Revision Date 24-Oct-2017 Revision Number 1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING GHS product identifier Product Name CITRAZYME Other
LORANN OILS, INC Aurelius Road Office (800) Lansing, MI Fax (517)
3640 Natural Strawberry Flavor, Natural Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 05/07/2015 Version: 1 SECTION 1:
Issue Date: 26-Sep-2011 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Liquid Cleaning Compound. 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 26-Sep-2011 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Product Code Bio Blast CARROLL-146 N17 Recommended use of the chemical
SCOTT 24 Hour Sanitizing Wipe
SECTION 1. IDENTIFICATION Product name : Product code : 41524 Manufacturer or supplier's details Company name of supplier : Kimberly-Clark Corporation Address : 1400 Holcomb Bridge Road, Roswell, GA 30076-2199
: Praseodymium(III) chloride
samaterials.com SAFETY DATA SHEET Version 3.0 Revision Date 09/04/2017 1. PRODUCT AND COMPANY IDENTIFICATION 1.1Product identifiers Product name Brand : Praseodymium(III) chloride : SAM CAS-No. : 10361-79-2
Product:... PETROTECH 25 CAS No... Mixture No single CAS # applicable Health 1 Flammability 0 Reactivity 0 Protective Equipment B
Section 1. CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification Product:... PETROTECH 25 CAS No.... Mixture No single CAS # applicable Company Identification Health 1 Flammability 0 Reactivity
1. Product And Company Identification
1. Product And Company Identification Product Name: Armor All Multi-Purpose Auto Cleaner Spray Responsible Party: Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies,
SAFETY DATA SHEET FIRST MARK ENZYMATIC DRAIN MAINTAINER
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Other means of identification : not applicable Recommended use : Drain Cleaner Restrictions on use : Reserved for industrial and professional
SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: 06/01/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Substance name Chemical name : Substance : Zinc Citrate
: Sodium Phosphate, Dibasic, Anhydrous
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Date of issue: 05/06/2015 Revision date: 04/11/2018 Supersedes: 05/06/2015 Version: 1.1 : Substance CAS-No. : 7558-79-4
BAX System PCR Tablets
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Issuing Date 07-Aug-2013 Revision Date 07-Aug-2013 Revision Number 0 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
SAFETY DATA SHEET Issuing Date 07-Aug-2013 Revision Number 0 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING GHS product identifier Product Name NOVO ANTIBACTERIAL FOAMING HAND
Safety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)
Safety Data Sheet Magnesium Sulfate, Anhydrous 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Magnesium Sulfate, Anhydrous Synonyms/Generic Names: Magnesium sulphate Product Number: 3288 Product Use:
: Ammonia Standard, 1000ppm
Date of issue: 06/16/2014 Revision date: 09/29/2017 Supersedes: 06/16/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Ammonia Standard,
: Safranin, 1% Aqueous
Date of issue: 04/24/2015 Revision date: 02/20/2018 Supersedes: 02/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Safranin, 1% Aqueous
: KD-81 Pine Deodorant-Cleaner
SECTION 1: Identification 1.1. Identification Product form Product name KD-81 Pine Deodorant-Cleaner Date of issue: 02/09/2018 Revision date: 04/15/2015 : Mixture Product code : 1273-9228 1.2. Recommended
SDS Number: FLUENCY AGENT SDS Version 1.0
Revision Date: 12/16/2013 Print Date: 12/16/2013 SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION Product name FLUENCY AGENT SDS Number 102000017992 Product code (UVP) 79131054 Product Use Seed flow
: Potassium Chloride, 4M, Saturated with Silver Chloride
Potassium Chloride, 4M, Saturated with Silver Chloride Date of issue: 11/29/1998 Revision date: 01/31/2018 Supersedes: 06/27/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form
ARMSTRONG FLIP SPRAY ADHESIVE
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Armstrong Flooring, Inc. Address : PO Box 325 Lancaster PA Telephone : (8) 233-3823
Issue Date: 25-Aug-2011 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Aerosol Festival Furniture Polish 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 25-Aug-2011 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Aerosol Festival Furniture Polish CARROLL-117 Product Code 811
Revision Date 4-August-2014 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION. Foremost 3126-ES Waterbase Dust Command
SAFETY DATA SHEET Version. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name Product Code 326-ES Recommended Use of the Chemical and Restrictions on Use Recommended Use Cleaning agent.
: None under normal conditions.
Date of issue: 03/30/2016 Version: 1.0 SECTION 1: Product and Company Identification 1.1. Product identifier Product name : Sheep On The Road 1.2. Relevant identified uses of the substance or mixture and
: Sodium Bicarbonate-Sodium Chloride Solution
Date of issue: 01/22/2014 Revision date: 03/13/2018 Supersedes: 03/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Bicarbonate-Sodium
LORANN OILS, INC Aurelius Road Office (800) Lansing, MI Fax (517)
0212 - Cinnamon Roll Flavor, Artificial Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Date of issue: 05/06/2015 Version: 1 SECTION 1: