FERRITE CORES AND TILES
|
|
- Chester Freeman
- 6 years ago
- Views:
Transcription
1 FERRITE CORES AND TILES 1. Shape factor (Se/Le): larger the shape factor, the higher the impedance. For the case of 1 pass through the core, a snug fit, and longer core is recommended as space permits. 2. Adjust the ferrite core positioning to target for antinode placement. 3. Performance can be increased by looping the cable around the core between to 3~5 times. ROUND CABLE CORES: Split Type G Ferrite Core - no nickel and competitively priced NEW! GRFC Series GRFC Series PART NO. A B C D Applicable Cable Diameter (mm) GRFC ~ GRFC ~ GRFC ~ GRFC ~ GRFC MAX 45 GRFC ~ GRFC ~ GRFC ~ GRFC ~ RFCK2-20 (w/mounting tab) GTFC Series GTFCK Series TRCA Series RFC Series RFC-H ~ RFC MAX 180 RFCK-20 (RFC-20 with mount tab) MAX 180 GTFC Series GTFC MAX 45 GTFC MAX 55 GTFC MAX 40 GTFC MAX 55 GTFC MAX 40 GTFC MAX 50 GTFC MAX 70 GTFC MAX 50 GTFCK Series GTFCK MAX 45 GTFCK MAX 55 GTFCK MAX 40 GTFCK MAX 55 GTFCK MAX 40 GTFCK MAX 50 GTFCK MAX 70 GTFCK MAX 50 TRCA Series TRCA TRCA The specifications and properties regarding performance above are not guaranteed, and are subject to change without notice due to product improvement and specification change. Please contact us before use. For storage of the products keep them in cool and dry rooms at ambient temperature avoiding high temperatures, humidity, and direct sunlight. All statements, technical information, and recommendations herein are based on tests and are believed to be reliable, but the accuracy and completeness are not guarantee d and are subject to change without notice due to product improvement and specification change. The following is made in lieu of all warranties, expressed or implied, including the implied warranties of marketability and fitness for purpose. Intermark USA s obligation under this warranty shall be limited to replacement of product that proves to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. Intermark USA shall have no liability for any injury, loss or damage arising out of the use of or the inability to use the products. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer. FERRITE CORES AND TILES - Rev15-10/08/2013
2 ROUND CABLE CORES: One-Piece Type G Ferrite Core - no nickel and competitively priced NEW! øb øa GRI Series C GRI Series Part No. A B C GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GRI GTR Series GTRE Series GTR Series Part No. A B C GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTR GTRE Series Part No. A B C D E GTRE GTRE Cross-sectional view of GRI (round) and GTRE (oblong) ferrite cores
3 Low Frequency Core TRM cores for low frequency range -High impedance noise filters for low frequency. -Looped cable around the core increases effectiveness by 10 2 Part No. A B C Ω/10MHz (2 turns) TRM E-WE TRM E-WE TRM E-WE TRM E-WE TRM E-WE TRM E-WE TRMH Low frequency, high µ ferrite cores Part No. A B C -High impedance at less than 1MHz. -Increased impedance can be obtained by several turns. -Suitable for conducted emissions for the KHz ranges. Ω/1MHz TRMH E TRMH E TRMH E TRMH E TRMH E TRMH E TRCB Low frequency ferrite core with plastic casing NEW! -Plastic casing prevents ferrite core from cracking and chipping -Suitable for conducted emission from KHz to lower MHz range Part No. A B C Ω/10MHz TRCB (11.7) 11 TRCB (13.5) 8 TRCB (15.1) 7 Noise Attenuation Effectiveness
4 MRFC ferrite clamp for low frequency range NEW! -Aimed to suppress low frequency noise between 150KHz to 30MHz. -Plastic screw mounting option available -Operating temperature: -40 C ~85 C -UL94V-0-rated housing Part No. Part No. (screw mount option) A B C D Applicable cable diameter MRFC (MAX) MRFC-13 MRFCK (MAX) MRFC-20 MRFCK (MAX) Ω/10MHz 20 Noise Attenuation Effectiveness Screw mount option RFC-*MA Low frequency, high µ ferrite cores -Aimed to suppress low frequency noise generated by engine control units (ECU), inverters, and motors. -Split type with plastic casing -Operating Temperature: -40 C ~ 125 C -Casing has a designated area for placing a plastic cable tie -UL-94V-2 rated Part No. A B C Applicable Cable Diameter RFC-8MA (MAX) RFC-13MA ~13.5 RFC-20MA (MAX) Ω/10MHz 20
5 FLAT CABLE CORES: 1-Piece Type G Ferrite Core - no nickel and competitively priced NEW! GFPC Series Part No. A B C D E GFPC GFPC GFPC GFPC GFPC GFPC GFPC GFPC GFPC GFPC GFPC GFPC GFPC GFPC GSSC GSSC GSSC GSSC GSSC GSSC GSSC GSSC GSSC FLAT CABLE CORES: 2-Piece Type GSSH and GFPH series are a set of two of the same U-shaped pieces, while GFPO series has a combination of one U-shaped piece and one flat piece. Part No. A B C D E GFPH GFPO GFPO GFPO GSSH GSSH GFPH, GSSH GSSH GSSH GFPO FLAT CABLE CORES: Large 2-Piece Type BCN BCN Series Adhesive mount with plastic holders. Part No. A B (C) D (E) (F) BCN BCN BCN
6 PLASTIC STOPPER, HOLDER, AND CLIP FPCK (stopper), FRC (clip), and FRH (holder) for ferrite cores Part No. Material Color UL Rating Applicable Ferrite Core List FPCK-12A PVC Clear UL94V-0 For GFPC FPCK-12B PVC Clear UL94V-0 For GFPC FRC-12CP Nylon 66 Light Gray UL94V-0 For GSSC FRHL-20 Nylon 66 Natural UL94V-2 For GSSC FRH-12 Nylon 66 Light Gray UL94V-0 For GSSC AMORPHOUS CORE -Higher magnetic permeability and saturated magnetic density than a ferrite core. -Suppresses noise from 150KHz to 30MHz generated by a switching regulator or an inverter. AF01-40 Dimensions (side view) AF01-40 Dimensions (top view) AF01-40 vs Frequency (10 turns) METAL CORE -Due to higher magnetic flux density, current superposition (current at 20A or less) will not lower the impedance. -Resin-coated core to protect cables. - is stable from -40 C~+140 C, with a high Curie temp. -Possible to suppress normal mode noise. MPTR E vs Frequency (with DC superposition) PART NO. Max Outer Diameter Min Inner Diameter Max Length Ω/1MHz (5turns) MPTR E MPTR= E MPTR E FERRITE TILES SD Tiles sintered ferrite tiles for CPU s high density, high perform PART NO. A B W/m K SD ~ ~ 2000 SD T ~ ~ 2000 SD ~ ~ 2000 SD T ~ ~ 2000 MULTI HOLE TILES PART NO. A B C D E F # of holes FH FH FH FH
7 GRI Graphs GTRE Graphs
8 GSSC Graphs
9 GFPH Graph GSSH Graphs GFPC Graphs
10 GFPO Graphs GRFC-5 GRFC-6 GRFC Graphs GRFC-8 GRFC-9 GRFC-13
NANOCRYSTALLINE VITROPERM EMC COMPONENTS ADVANCED MATERIALS THE KEY TO PROGRESS
NANOCRYSTALLINE VITROPERM EMC COMPONENTS ADVANCED MATERIALS THE KEY TO PROGRESS VACUUMSCHMELZE NANOCRYSTALLINE VITROPERM EMC COMPONENTS VACUUMSCHMELZE GmbH & Co. KG (VAC) is one of the worldwide leading
More informationNaNOcRysTallINE VITROPERM. EMc PROducTs. advanced MaTERIals THE KEy TO PROGREss
NaNOcRysTallINE VITROPERM EMc PROducTs advanced MaTERIals THE KEy TO PROGREss VITROPERM NaNOcRysTallINE EMc PROducTs VacuuMscHMElZE GmbH & co. KG (Vac) is a leading global manufacturer of modern magnetic
More informationReference Only. DC Resistance Impedance at 100MHz (mω) Rated Current *1 MURATA (A) Part Number. (Ω) Tolerance Typ. Max.
Spec No. JENF243J-0002B-01 P1/8 CHIP NOISE FILTER NFZ2MSM SN10L REFERENCE SPECIFICATION 1. Scope This reference specification applies to NFZ2MSM_SN10L, Chip Noise Filter.. 2. Part Numbering (ex) NF Z 2M
More informationFerrite EMI Cable Cores
Ferrite EMI Cable Cores About Laird Laird is a global technology business focused on enabling wireless communication and smart systems, and providing components and systems that protect electronics. Laird
More informationInductive Absorbers for Megawatt applications. Inductive Absorbers for Megawatt applications
Presented at MAGNETEC GmbH, Langenselbold www.magnetec.de 05/2011 Dr. Fe 1/15 Content Application 1: big Wind Turbines in the MW range Application 2: big Inverters for Photovoltaic Power Plants Application
More informationClamp Filters (Ferrite Core with Case)
lamp Filters (Ferrite ore with ase) For automotive EU/able ZT series Type: ZT-V-K ZT Issue date: ecember 20 ll specifications are subject to change without notice. onformity to RoHS irective: This means
More informationMulti-Aperture/Binocular Ferrite Cores 1/5
Multi-Aperture/inocular Ferrite Cores 1/5 1. 43 Material Characteristics This NiZn is our most popular ferrite for suppression of conducted EMI from 20 to 250. This material is also used for inductive
More informationReference Only. 2.Part Numbering (ex) NF Z 5B BW 2R9 L N 1 0 L
SpecNo.JENF243J-0011A-01 P1/10 CHIP NOISE FILTER NFZ5BBW LN10 REFERENCE SPECIFICATION 1.Scope This reference specification applies to NFZ5BBW_LN10L Series, Chip Noise Filter. 2.Part Numbering (ex) NF Z
More informationEngineer Grade and Utility Grade Reflective Sheeting
Engineer Grade and Utility Grade Reflective Sheeting Series 3200, 3260 and 5200 Meets ASTM Type I Product Bulletin September 2013 Replaces Information Folder 1.7 dated November 2005 Description Engineer
More informationReference Only. Spec. No. JENF243E-0002Q-01 P1 / 8
Spec. No. JENF243E-0002Q-01 P1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE31PT 1E9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for Large
More informationNotice for TAIYO YUDEN Products [ For General Electronic Equipment ]
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2018.
More informationReference Only. *B:Bulk packing also available. Inductance DC Resistance ( m ohm)
P.1/9 CHIP COIL (CHIP INDUCTORS) LQM18PN FHD REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQM18PN_FH series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 18 P N 2R2
More information3 Scotchlite Engineer Grade Work Zone Sheeting
3 Scotchlite Engineer Grade Work Zone Sheeting Series 1480 For Use On Traffic Control Devices Used in Work Zones Product Bulletin 1480 June 1998 Replaces PB 86 dated February 1989 Health and Safety Information
More informationELECTROMAGNETIC NOISE SUPPRESSION SHEETS
Near field EMI suppression with easy assembly. Simply attach, sandwich and wrap around Magnetic metal filler typehigh performance Soft ferritestandard P19 P20 Ferrite sheet P22 P23 17 MAGNETIC FOIL Effective
More informationPRODUCT SPECIFICATION FOR APPROVAL
Issue : 151XC14C08005 Date of Issue : October 27.2008 DIGI-KEY CORPORATION : New Changed PRODUCT SPECIFICATION FOR APPROVAL Product Description Product Part Number : Common Mode Noise Filter (RoHS) : EXC14CE900U
More informationReference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification
Spec. No. JENF243E-0003Q-01 P 1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for
More informationDiamond Grade Flexible Roll-Up Sheeting
Traffic Safety and Security Division Diamond Grade Flexible Roll-Up Sheeting Series RS60/64I Product Bulletin RS60/64I February 2016 Description 3M Diamond Grade Flexible Roll-Up Sheeting Series RS60 is
More informationTemperature time profile this determines the grain growth, i.e. their final size in the order of some µm, and the properties of grain boundaries.
Custom Services for Magnetic Components A user guide to soft magnetic materials (part 3 of 4) Ferrites Soft magnetic ferrites are principally a ceramic material, i.e. sintered grains of non metallic (semiconducting)
More informationPower Resistor, for Mounting onto a Heatsink Thick Film Technology
Power Resistor, for Mounting onto a Heatsink Thick Film Technology FEATURES 100 W at 25 C case temperature High power rating High overload capabilities up to 2500 V RMS Wide resistance range from 0.0 to
More informationEMC PRODUCTS. Advanced Materials The Key to Progress
EMC PRODUCTS based on NANOCRYSTALLINE VITROPERM Advanced Materials The Key to Progress The Company VACUUMSCHMELZE We are a global company with our headquarters in Hanau, Germany. We currently have approximately
More informationBroadband Ferrite Toroidal Cores For Non-Tuned Circuits and EMI Filters
roadband Ferrite Toroidal Cores 1/8 1. 31 Material Characteristics A MnZn ferrite designed specifically for EMI suppression applications from as low as 1 Mz up to 500 Mz. This material does not have the
More informationReference Only. Chip Ferrite Bead BLM31 SH1L Murata Standard Reference Specification [AEC-Q200]
P.1/9 Chip Ferrite Bead BLM31 SH1L Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31_SH Series based
More informationTSC International North Magnetics Blvd. Wadsworth IL 60083Tel (847) Fax (847)
TSC International TSC International is a manufacturer of magnetic materials for all frequencies. Our many end markets include: automotive, computer, lighting, telecommunications, instrumentation, industrial
More informationVELCRO brand Adhesives. p re s s u re sensitive, fire re t a rd a n t, solve n t and heat ac t i v a t e d
VELCRO brand Adhesives p re s s u re sensitive, fire re t a rd a n t, solve n t and heat ac t i v a t e d VELCRO brand Adhesives VELCRO brand products are available with a variety of adhesives to best
More informationCold Shrink EPDM Tubes Connector Insulators 8420 Series
Product Description PST features are: Applications 6 Figure 1 Page 2 of 6 Data: Physical & Electrical Properties PST Selection Table Min. diameter (mm) Max. diameter (mm) Length (mm) 8423-6 7.8 14.3 152
More informationReference Only. Spec. No. JENF243A Chip Ferrite Bead BLM31KN SH1L Murata Standard Reference Specification [AEC-Q200]
Chip Ferrite Bead BLM31KN SH1L Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31KN_SH Series based on
More informationNew Materials and Design Tools for Magnetic Materials Suitable for GaN and SiC Switching Frequencies
New Materials and Design Tools for Magnetic Materials Suitable for GaN and SiC Switching Frequencies APEC 2017 Industry Session ID 1100 Christopher G. Oliver Director of Technology Micrometals, Incorporated
More informationReference Only. Chip Ferrite Bead BLM31 SZ1 Murata Standard Reference Specification [AEC-Q200]
P.1/9 Chip Ferrite Bead BLM31 SZ1 Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31_SZ Series based
More informationTable of Contents NEW YORK. Product: Coatings...ii. General Notes...iii. Shipping Notice... iv. Mast Arm Bracket...1. Free-Swinging...
Table of Contents s...ii General Notes...iii Shipping Notice... iv Product: Mast Arm Bracket...1 Free-Swinging... 3-15 Side-of-Pole...17 Post Top...19 Pedestrian Poles...21 i s P29 P30 P33 P34 P36 P38
More informationMA Series 5.25 or /25V Commercial ABS Plastic Back Can Speakers
simply unique. MA Series 5.25 or 6.5 7/25V Commercial ABS Plastic Back Can Speakers SP5MAT SP6MAT 5.25 speaker 6.5 speaker Features Speco Technologies Multi-Application Series was designed to make the
More information2SD1980 V CEO 100V I C 2A R 1 R kΩ 300Ω. Datasheet. Power Transistor (100V, 2A)
2SD1980 Power Transistor (100V, 2A) Datasheet loutline Parameter Value V CEO 100V TO-252 SC-63 I C 2A R 1 R 2 3.5kΩ 300Ω CPT lfeatures 1)Darlington connection for high DC current again. 2)Built-in resistor
More informationBonded Neo Magnetization Guide
Bonded Neo Magnetization Guide 1 Presentation Outline 1. Magnetizing Systems 2. Fixture Design 3. Construction 4. Testing 5. Design Study 2 Magnetizing Systems A typical magnetizing system consists of
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating Low thermal radiation of the case Wide ohmic value range Easy
More information20 W Power Resistor, Thick Film Technology, TO-220
20 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS Models Available click logo to get started The well known TO-220 package is compact and easy to mount. DIMENSIONS in millimeters
More informationCommon mode Noise Filters
ommon mode Noise Filters ommon mode Noise Filters Type: X4 n Features l ffective in noise suppression of portable equipment l Magnetic shield type l Small size(l 1.5 mm W 1. mm H.5 mm) and light weight(bout
More informationPower/Inductive Materials and Components
Fair-Rite Products Corp. Your Signal Solution Power/Inductive Materials and Components Fair-Rite Products Corp. www.fair-rite.com Phone: 888-FAIRRITE (324-7748)/845-895-255 Fax: 888-FERRITE (337-7483)/845-895-2629
More information3M Eurosocket Type C (Rows A & C, A & B or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationVT6Z1. Power management (dual transistors) Datasheet. Parameter Value V CEO -20V I C -200mA. Parameter Value V CEO I C. 20V 200mA
VT6Z1 Power management (dual transistors) Datasheet Parameter Value V CEO -20V I C -200mA loutline VMT6 Parameter Value V CEO I C 20V 200mA lfeatures 1) General Purpose. 2)
More informationYour Perfect Inductor Ver Multilayer Ferrite Chip Inductor (FL SERIES) FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS FEATURE
Multilayer Ferrite Chip Inductor (FL SERIES) FEATURE 1. Monolithic structure for high reliability 2. Dimensions are unified for automatic mounting 3. Closed magnetic circuit avoids crosstalk and is suitable
More informationEMZ51. Power management (dual transistors) Datasheet. Parameter Value SOT-563 V CEO 20V SC-107C I C 200mA. Parameter Value V CEO -20V I C.
EMZ51 Power management (dual transistors) Datasheet loutline Parameter Value SOT-563 V CEO 20V SC-107C I C 200mA EMT6 Parameter Value V CEO -20V I C -200mA lfeatures 1) General
More informationVT6T11. Power management (dual transistor) Datasheet. Parameter Tr1 and Tr2 VMT6 V CEO -20V I C -200mA
VT6T11 Power management (dual transistor) Datasheet loutline Parameter Tr1 and Tr2 VMT6 V CEO -20V I C -200mA lfeatures 1)Very small package with two transistors. 2) Suitable for current mirror circuit.
More information17 ELECTROMAGNETIC NOISE SUPPRESSION SHEETS
電磁波抑制シElectromagnetic ートnoise suppression sheets 電波吸収体Electromagnetic Magnetic foil absorber 磁性箔Magnetic foil Near field EMI suppression with easy assembly. Simply attach, sandwich and wrap around Magnetic
More informationHT829 Humidity Transmitter HT839 Humidity and Temperature Transmitter Installation and Operating Instructions
HT829 Humidity Transmitter HT839 Humidity and Temperature Transmitter Installation and Operating Instructions Tel: 763. 571.3121 Fax: 763. 571.0927 www.minco.com Description Model HT829 is a 2-wire temperature
More informationSection Pot Cores Low Level Applications
The information contained in this section is primarily concerned with the design of linear inductors for high frequency LC tuned circuits using ferrite pot cores. Magnetics has arranged the data in this
More informationDTC114TUA FRA. Datasheet. AEC-Q101 Qualified. NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor)
DTC114TUA FRA NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor) Datasheet AEC-Q101 Qualified loutline Parameter Value SOT-323 V CEO 50V SC-70 I C 100mA R 1 10kΩ (UMT3) lfeatures 1) Built-In
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: USB3.1 Connector Product Specification GSB4X series A / B type, Receptacle, Thru hole, PCB mount Revisions Control Rev.
More informationReference Only. Spec. No. JENF243A-9113E-01. Chip Power Bead BLE32PN SZ1L Murata Standard Reference Specification [AEC-Q200]
Chip Power Bead BLE32PN SZ1L Murata Standard Reference Specification [AEC-Q200] P.1/9 1. Scope This reference specification applies to Chip Power Bead for Automotive Electronics BLE32PN_SZ Series based
More informationEMD59. Datasheet. Complex Digital Transistors (Bias Resistor Built-in Transistors)
EMD59 Complex Digital Transistors (Bias Resistor Built-in Transistors) Datasheet loutline Parameter Value SOT-563 V CC 50V SC-107C I C(MAX.) 100mA R 1 10kΩ R 2 47kΩ EMT6
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES High power rating: 500 W High overload capability up to 2 times rated power (see
More information2SCR554P FRA V CEO 80V I C 1.5A. Datasheet. AEC-Q101 Qualified. Middle Power Transistor (80V / 1.5A)
2SCR554P FRA Middle Power Transistor (80V / 1.5A) Datasheet AEC-Q101 Qualified Parameter V CEO Value 80V loutline SOT-89 SC-62 I C 1.5A MPT3 lfeatures 1)Low saturation voltage,typically V CE(sat) =300mV(Max.)
More informationImpedance ( ) (at 100MHz)(*1) (refer to below comment)
Reference Spec.No.JENF243A-9118D-01 P1/10 Chip Ferrite Bead BLM15 SZ1D Murata Standard Reference Specification [AEC-Q200] 1.Scope This reference specification applies to Chip Ferrite Bead BLM15_SZ series
More informationRecommended Hole Pattern: [mm]
Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: 1 12 3 10 4 9 10 u0,5 6 7 21 ±0,5 2 O 2,4 12 30 10 10 9 7 21 Properties Test conditions Value Unit Tol. Inductance 10 khz/ 0.1 ma
More informationCSC Soft Magnetic Powder Core CSC Core Division
CSC Soft Magnetic Powder Core CSC Core Division Ⅰ. Soft Magnetic Powder Cores Ⅱ. CSC Soft Magnetic Powder Cores Ⅲ. Applications of CSC Cores Ⅳ. CSC Specialty Special shape Cores Ver. 2018. 04. I. Soft
More informationDTA114TCA. Datasheet. PNP -100mA -50V Digital Transistor (Bias Resistor Built-in Transistor) Parameter Value SOT-23 V CEO -50V I C -100mA R 1 10kΩ
DTA114TCA PNP -100mA -50V Digital Transistor (Bias Resistor Built-in Transistor) Datasheet loutline Parameter Value SOT-23 V CEO -50V I C -100mA R 1 10kΩ (SST3) lfeatures 1) Built-In Biasing Resistor 2)
More information3M Wiremount Socket Position for.050 Pitch Cable 79 Series
3M Wiremount Socket.100.100 64 Position for.050 Pitch Cable 79 Series Standard profile plastic strain relief Mates with 3M headers, plugs, and pin strips for quick connect/disconnect capability Centerbump
More information2SCR533P FRA V CEO 50V I C. Datasheet. AEC-Q101 Qualified. Middle Power Transistor (50V / 3A)
2SCR533P FRA Middle Power Transistor (50V / 3A) Datasheet AEC-Q101 Qualified Parameter V CEO I C Value 50V 3A loutline SOT-89 SC-62 MPT3 lfeatures 1)Low saturation voltage, typically V CE(sat) =350mV(Max.)
More informationSST2222A V CEO I C. 40V 600mA. Datasheet. NPN Medium Power Transistor (Switching) lfeatures 1)BV CEO >40V(I C =10mA) 2)Complements the SST2907A
SST2222A NPN Medium Power Transistor (Switching) Datasheet Parameter V CEO I C Value 40V 600mA loutline SOT-23 SST3 lfeatures 1)BV CEO >40V(I C =10mA) 2)Complements the SST2907A linner circuit lapplication
More informationReference Only. Spec. No. JENF243A-0021P-01. GHz Noise Suppression Chip Ferrite Bead BLM18EG N1 Reference Specification
GHz Noise Suppression Chip Ferrite Bead BLM18EG N1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM18EG_ N Series. P.1/8 2. Part Numbering (ex.) BL M 18 EG
More informationEMH10 FHA. Datasheet AEC-Q101 Qualified. General purpose (Dual digital transistor)
EMH10 FHA General purpose (Dual digital transistor) Datasheet AEC-Q101 Qualified loutline Parameter DTr1 and DTr2 SOT-563 V CC 50V SC-107C I C(MAX.) 100mA R 1 2.2kΩ R 2 47kΩ EMT6 lfeatures 1)Two DTC123J
More informationDTC144T series. Datasheet. NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor) Parameter Value SOT-723 SOT-323 V CEO I C.
DTC144T series NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor) Datasheet loutline Parameter Value SOT-723 SOT-323 V CEO I C R 50V 100mA 47kΩ DTC144TUA lfeatures (VMT3) (UMT3) 1) Built-In
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationUMB10N FHA. Datasheet AEC-Q101 Qualified. General purpose (Dual digital transistor)
UMB10N FHA General purpose (Dual digital transistor) Datasheet AEC-Q101 Qualified loutline Parameter DTr1 and DTr2 SOT-363 V CC -50V SC-88 I C(MAX.) -100mA R 1 2.2kΩ R 2 47kΩ UMT6 lfeatures 1)Two DTA123J
More informationReference Only. GHz Noise Suppression Chip Ferrite Bead BLM15H SN1 Reference Specification
Spec.No.JENF243A-0024L-01 P1/9 GHz Noise Suppression Chip Ferrite Bead BLM15H SN1 Reference Specification 1.Scope This Reference Specification applies to Chip Ferrite Bead BLM15H_SN series. 2.Part Numbering
More informationAccessories / Screwlocks
3401-022 Accessories / Screwlocks Product Features Male or female screwlocks Residual magnetism level - Brass parts: NMB (200 Gamma max) - Stainless Steel parts: NMB (200 Gamma max) 1 part number for 1
More informationStretch Wire. P/N Rev. 2. IOM Stretched wire festoon manual
Festoon Stretch Wire 1 Conductix Incorporated The technical data and images which appear in this manual are for informational purposes only. NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
More informationRecommended Hole Pattern: [mm]
Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 0 khz/ 0. ma L x4 mh +50%/-30% 4 3 ±0,5 O,6 O,4 4 0 3 Rated Current @ 70 C I
More informationReference Only. Spec. No. JENF243D-0006K-01 P 1/ 8
Spec. No. JENF243D-0006K-01 P 1/ 8 Chip EMIFIL LC Combined Monolithic NFL21SP X1C Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL21S
More information5.Rated value No.JEMCP B MURATA PART NO. (3) Nominal Capacitance Capacitance Tolerance (5) Rated Voltage Rated Current (ma) DC Resistance Insul
No.JEMCP0-010871B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT NFM41PC155 Series Reference Sheet 1.Scope This product specification is applied to Chip EMIFIL Chip 3-terminal Capacitor for Large
More informationDTC143XCA. Datasheet. NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor)
DTC143XCA NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor) Datasheet loutline Parameter Value SOT-23 V CC 50V I C(MAX.) 100mA R 1 4.7kΩ R 2 10kΩ (SST3) lfeatures 1) Built-In Biasing
More informationSOT-346 SC-59. linner circuit. Reel size (mm) Taping code
2SC4713K High frequency amplifer Transistor, RF switching (6V,50mA) Datasheet Parameter V CEO I C Value 6V 50mA loutline SOT-346 SC-59 SMT3 lfeatures 1)Very low output-on resistance (Ron). 2)Low capacitance.
More information5.Rated value. 6.Package. No.JEMCP B. Section 7.1 (-55 to 125 C / -55 to 125 C) 1000MΩmin pf NFM3DPC223R1H3L ±20 % DC 50 V
No.JEMCP0-010856B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM3DP Series Reference Sheet 1.Scope This product specification is applied to Chip EMIFIL Chip 3-terminal Capacitor
More informationNOVEMBER 10. FINEMET is a registered trademark of Hitachi Metals, Ltd.
NOVEMBER 10 FINEMET is a registered trademark of Hitachi Metals, Ltd. http://www.hitachi-metals.co.jp/e/prod/prod02/prod02.html As IT and electronic devices become small and improve its performance, issues
More informationReference Only. Chip Ferrite Bead BLM18 (B/J)H1D Murata Standard Reference Specification [AEC-Q200]
Chip Ferrite Bead BLM18 (B/J)H1D Murata Standard Reference Specification [AEC-Q200] P.1/10 1.Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM18_(B/J)H Series
More informationNew Designs. Not Recommended for 2SA2071 V CEO -60V I C -3A. Datasheet. Middle Power transistor (-60V, -3A) linner circuit.
2SA2071 Middle Power transistor (-60V, -3A) Datasheet lfeatures Parameter Value V CEO -60V I C -3A 1)High speed switching. 2)Low saturation voltage. (Typ.:-200mV at I C =-2A, l B =-0.2A) 3)Strong discharge
More informationReference Only. Spec. No. JENF243H-0005H-01 P 1/ 7
Spec. No. JENF243H-0005H-01 P 1/ 7 1. Scope Block Type EMIFIL BNX003-01 Reference Specification This reference specification applies to Block Type EMIFIL. 2. Rating 2.1 Customer Part Number 2.2 Murata
More informationSpec. No. JENF243H-0006H-01 P 1/ 7
Spec. No. JENF243H-0006H-01 P 1/ 7 1. Scope 2. Rating Block Type EMIFIL BNX005-01 Reference Specification This reference specification applies to Block Type EMIFIL. 2.1 Customer Part Number 2.2 Murata
More information4. Type & Dimensions No.JEMCP B (Unit:mm) MURATA PART NO. (1)-1 L a (1)-2 W b T e g d p 1 NFA31CC101S1E4D 3.2± ± ± min. 2 N
No.JEMCP0-010875B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR ARRAY TYPE FOR GENERAL NFA31CC Series Reference Sheet 1.Scope 2.Reference PART No. List 1 2 3 4 5 6 7 8 This product specification is applied to
More informationReference Only. GHz Noise Suppression Chip Ferrite Bead BLM15E SN1 Reference Specification
GHz Noise Suppression Chip Ferrite Bead BLM15E SN1 Reference Specification P.1/9 1.Scope This reference specification applies to Chip Ferrite Bead BLM15E_SN series. 2.Part Numbering (ex.) BL M 15 EG 121
More informationDTC043T series. Datasheet. NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor) Parameter Value SOT-723 SOT-416FL V CEO I C
DTC043T series NPN 100mA 50V Digital Transistor (Bias Resistor Built-in Transistor) Datasheet loutline Parameter Value SOT-723 SOT-416FL V CEO I C 50V 100mA R 1 4.7kΩ DTC043TM DTC043TEB lfeatures 1) Built-In
More informationReference Only. Spec. No. JENF243D-0003J-01 P1/ 8
Spec. No. JENF243D-0003J-01 P1/ 8 Chip EMIFIL LC Combined Monolithic NFL18SP X1A3 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL18SP
More informationEMX1 FHA. General purpose transistor (dual transistors) Datasheet AEC-Q101 Qualified. Parameter Tr1 and Tr2 SOT-563 V CEO 50V SC-107C I C 150mA
EMX1 FHA General purpose transistor (dual transistors) Datasheet AEC-Q101 Qualified loutline Parameter Tr1 and Tr2 SOT-563 V CEO 50V SC-107C I C 150mA EMT6 lfeatures 1) Two 2SC2412K chips in a EMT package.
More informationFestoon Manual Stretch Wire
Festoon Manual Stretch Wire 1 961000.3.0 14.12.16 STRETCHED WIRE FESTOON MANUAL CONDUCTIX INCORPORATED The technical data and images which appear in this manual are for informational purposes only. NO
More informationSPECIFICATIONS AND TEST METHODS
Messrs. Specification No. : JEMCP0-00869A Product Specification for Reference Issued Date : 20 FEB. 204 Part Description : Chip EMIFIL Chip 3-terminal Capacitor for Large Current for General Customer Part
More information2SC5658 FHA V CEO 50V I C. 150mA. Datasheet. AEC-Q101 Qualified. General purpose small signal amplifier (50V, 150mA) linner circuit
2SC5658 FHA General purpose small signal amplifier (50V, 150mA) Datasheet AEC-Q101 Qualified Parameter V CEO I C Value 50V 150mA loutline SOT-723 SC-105AA VMT3 lfeatures 1)Low Cob.Cob=2.0pF(Typ.) linner
More informationNo.JEMCP B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM18CC Series Reference Sheet 1.Scope 2.Reference PART No. List
No.JEMCP0-0085B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR LARGE CURRENT FOR GENERAL NFM8CC Series Reference Sheet.Scope 2.Reference PART No. List 2 3 4 5 6 8 3.MURATA Part NO. System (Ex.) This product
More informationDistributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. M Wiremount Socket.100.100 for.050 Pitch Cable 891 Series Preassembled, terminates
More informationReference Only. Spec. No. JENF243H-0003G-01 P 1/ 9
Spec. No. JENF243H-0003G-01 P 1/ 9 Block Type EMIFIL BNX01-01 Reference Specification 1. Scope 2. Rating This reference specification applies to Block Type EMIFIL. 2.1 Customer Part Number 2.2 Murata Part
More informationReference Only. (8)Numbers of Circuit. Impedance. (at 100MHz, Under Standard Testing Condition) 33±25%
P.1/9 Chip Ferrite Bead BLM31 SN1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM31_SN Series. 2. Part Numbering (ex.) BL M 31 PG 601 S N 1 L (1) (2) (3)
More informationNo.JEMCP B a)equivalent Circuit 5.Rated value MURATA PART NO. NFM2CC0UH3D NFM2CC02RH3D (3) Nominal Capacitance Capacitance Tolerance
No.JEMCP0-00863B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR GENERAL NFM2CC Series Reference Sheet.Scope 2.Reference PART No. List 2 3 4 5 6 7 8 3.MURATA Part NO. System (Ex.) This product specification
More informationLED Part No. Chip Material Emitted Color Lens Color Stopper. InGaN Blue Blue Diffused 5484BN/BADC-AGJA/PR/MS
Features High luminous intensity output Oval Shape Well defined spatial radiation Wide viewing angle (2 1/2 ) : 110 o / 40 o UV resistant epoxy The product itself will remain within RoHS compliant version
More informationMolding Power Choke. - CSAB0730 Series. Marking. Marking. Date Code. Outline: 1 Appearance and dimensions (mm)
Outline: Magnetic shielded structure: excellent resistance to electro magnetic interference(emi). A composite structure, ultra low buzz noise. Low loss, high efficiency, wide application frequency. Lightweight
More information333-2SUBC/H3/S400-A6 LAMP. Features. Description. Applications. 1 Ver.:3 Release Date:12/13/2016 狀態 :Approved( 正式發行 )
Features Choice of various viewing angles Available on tape and reel. Reliable and robust The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen Free.(Br
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES High power rating: 500 W High overload capability up to 2 times rated Power (see energy curve Heatsink mounting Low thermal radiation
More informationCPC1967J. i4-pac Power Relay INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features. Applications. Ordering Information
i4-pac Power Relay INTEGRATED CIRCUITS DIVISION Characteristics Parameter Rating Units Blocking Voltage 4 V P Load Current = C: With C/W Heat Sink 3.3 No Heat Sink 1.3 A rms / A DC On-Resistance (max.8
More informationReference Only. D:Taping(φ180mm Reel, Paper Tape) L:Taping(φ180mm Reel, Plastic Tape) B:Bulk
Total page 2/16 P.1/10 Chip Ferrite Bead BLM21 N1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM21_ N Series. 2. Part Numbering (ex.) BL M 21 AG 121 S N
More informationPFC & Output Choke Cores
Nanocrystalline AMOS AMOSENSE Nanocrystalline Nanocrystalline Common Mode Chokes Product Summary Description AMC series amorphous choke cores are made of thin iron-based amorphous alloy. This type of iron-based
More informationCPC1908. Single-Pole, Normally Open i4-pac Power Relay INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features.
Characteristics Parameter Rating Units Blocking Voltage 6 V P Load Current = C: With C/W Heat Sink No Heat Sink Features 8.A rms Load Current with C/W Heat Sink Low.3 On-Resistance 6V P Blocking Voltage
More informationMV5491A/QT333-5SRVGW/S39
Features Choice of various viewing angles Available on tape and reel. Reliable and robust The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen Free.(Br
More informationSST3906 V CEO -40V I C. -200mA. Datasheet. PNP General Purpose Transistor
SST3906 PNP General Purpose Transistor Datasheet Parameter Value loutline SOT-23 V CEO -40V I C -200mA SST3 lfeatures 1)BV CEO >-40V(I C =-1mA) 2)Complements the SST3904 3)Low capacitance. linner circuit
More information