17 ELECTROMAGNETIC NOISE SUPPRESSION SHEETS
|
|
- Roxanne Armstrong
- 6 years ago
- Views:
Transcription
1 電磁波抑制シElectromagnetic ートnoise suppression sheets 電波吸収体Electromagnetic Magnetic foil absorber 磁性箔Magnetic foil Near field EMI suppression with easy assembly. Simply attach, sandwich and wrap around Magnetic metal filler type(high performance) Soft ferrite(standard) P19 P2 MG ABSORPTION SHEET EMI ABSORPTION SHEET Thermal conductivity + Electromagnetic noise suppression Ferrite sheet P21 P22 P23 17 電磁波抑制シート17 FFSX FFS CHANGEGEL SMARTPLY SMARTPLY MAGNETIC FOIL Effective suppression against electromagnetic noise at low frequency and leakage of magnetic flux Magnetic foil film P24 MAGNEFILM Electromagnetic noise suppression sheets
2 18 ELECTROMAGNETIC NOISE SUPPRESSION SHEET Effective suppression of electronic equipment noise Noise is easily suppressed with the simple assembly. Attach, sandwich and wrap around. Broad range of variations, sheet, core, heat-conductive types etc. Custom cutting and secondary processing are available. Noise damping Noise level is lowered by loss effect of magnetic substance, with smaller reflection suffered by conductive shielding materials. reflection large Shielding material damping small reflection small Suppression sheet damping large Suppression of antenna effects decreases the noise. Radiation noise is emitted by cables or patterns acting as an antenna. The magnetic substance reduce the noise by minimizing such antenna effects. Equivalent circuit without the suppression sheet L1 R1 Circuit board Equivalent circuit with the suppression sheet L1 R1 L2 R2 Suppression sheet Circuit board Electromagnetic Noise Suppression Sheets Magnetic foil film Sheet Heat + Electromagnetic noise suppression sheet Plate type cores MG MAB Flexible resin based product has a wide range of applications. CGE High thermal-conductivity type provides simultaneous heat solutions in applications where significant heat is generated such as IC, etc. Property comparison (reference) FFS Achieve a good balance between thinned ferrite and high-performance with the new manufacturing process. Attach MFM Effective for reducing electromagnetic noise at low frequencies and against leakage of magnetic flux. Problems for which the usual absorption sheet is not sufficient. Sandwich Wrap
3 MG ABSORPTION SHEET/MG 19 High performance type mixed with magnetic metal filler Variations MG-3A Heat-resistance has been improved up to 15. Excellent processability, with secondary processing provided to fit the specific application. Refer to the table below. Heat-resistant rubber based material enables application at wide range of temperature from -4 to 15. No chlorine or bromine materials are used. MG-9 9A Flexible Electromagnetic wave suppression sheet Reduce radiated emission by simply attaching MG-9 or MG-9A on ICs such as CPUs, cables or enclosures. Provide the cutting service upon request. UL 94 V- certified.ul 94 V- rated(adhesive tape not included) MG-1A Higher performance electromagnetic wave suppression sheet with the higher permeability. Reduce radiated emission by simply attaching the product on Ics such as CPUs, cables or enclosures. Provide the cutting service upon request. UL94V- certified.(adhesive tape not included) Part No. MG-3A MG-9 MG-9A MG-1A (mm)/thickness.5/ /.3/.5.5.1/.2/.3/.5 (μr )/Permeability 25/1MHz 75/1MHz 1/1MHz 13/1MHz (Ω cm) Volume resistivity Flame resistance UL94HB Equivalent to UL 94 HB UL94V- Properties Permeability Permeability[μr',μr"] Permeability[μr',μr"] Magnetic metal material + rubber Magnetic metal material + resin MG-3 Series MG-9 Series MG-3A μr MG-3A μr MG-9,9A μr MG-9,9A μr MG-1 Series MG-1A-.5 μr MG-1A-.5 μr MG-1A μr MG-1A μr Reflection loss MG-3 Series MG-9 Series Reflectivity[S11] [db] Reflectivity[S11] [db] MG-1 Series Network analyzer S11 PORT1 PORT2 Coaxial line Test piece Metal plate MG-1A[t.5mm] MG-1A[t.3mm] MG-1A[t.2mm] MG-1A[t.1mm] MG-1A[t.5mm] Transmission loss MG-3 Series MG-9 Series Transmittance[S21] [db] Transmittance[S21] [db] Adhesive tape not included MG-1 Series MG-1A[t.5mm] MG-1A[t.3mm] MG-1A[t.2mm] MG-1A[t.1mm] MG-1A[t.5mm] Network analyzer PORT1 PORT2 S21 The values are measured data for reference, not guaranteed.
4 2 EMI ABSORPTION SHEET/MAB Flexible sheet consists of resin with soft ferrite filler Sheet thickness,.4-4.mm are available. Flexible and easy handling. Soft ferrite + resin Part No. (mm) Thickness (Ω cm) Volume resistivity MAB-3.4/1./2./ Flame resistance UL94V- Soft ferrite + resin Various thickness Adhesive tape not included Properties Permeability Reflection loss Permeability [µ'µ"] MAB-3 µr' MAB-3 µr" The values are measured data for reference, not guaranteed. Reflectivity[S11] [db] Transmittance[S21] [db]. ー.5 ー 1. ー 1.5 ー 2. ー 2.5 ー 3.. ー.5 ー 1. ー 1.5 ー MAB-3[t=1mm] MAB-3[t=.4mm] Transmission loss MAB-3[t=1mm] MAB-3[t=.4mm] Network analyzer S11 PORT1 PORT2 Coaxial line Test piece Network analyzer PORT1 PORT2 S21
5 CHANGEGEL/CGE 21 Electromagnetic noise suppression sheet with thermal conductivity, phase-change type Phase-change type CHANGEGEL liquefies into high viscosity at a pre-determined temperature. Provides secure thermal conductivity on non-uniform surfaces. Liquefied into high viscosity at 5 to secure close contact with heating elements. GEL solidifies at room temperature providing easy handling. Soft ferrite + resin Soft ferrite + resin Double-sided adhesive Easy to peel off when solidified again.
6 22 SMARTPLY/FFSX RFID(13.56MHz) Ferrite Sheet for a 13.56MHz RFID system to suppress metal interference Properties Permeability 13.56MHz Improve the communication performance of RFID reader and tag by suppressing the metal interference. Ferrite material in which Q factor has been maximized at 13.56MHz is used for the sheet. Sintered material but thin with excellent in flexibility that enables easy design of custom profiles. The values are measured data for reference, not guaranteed. Coupling loss between antennas Test specification Coupling loss measurement Antenna Size Application IC tag Antenna pattern Number of turn Gap between antennas Gap to metal plate Magnetic substance Size Gap to antenna Thickness Degraded communication by interference from metal plate 31 42mm(Inner diameter) 3turns 3mm 1mm 5 6mm mm(contact) FFSX-.3:t.3mm FFS-.3:t.3mm MG-9A-.5:t.5mm Magnetic field Antenna Communication performance is improved NETWORK ANALYZER ADVANTEST R3754B Dimensions Magnetic substance Metal plare Coupling loss[db] 結合損失 -1.4 [db] MHz Reference * Magnetic substance(new) FFS-.3(SMARTPLY) Magnetic substance MG-9A-.5 Magnetic substance 1PET with adhesive layer 2Soft ferrite 3Double-sided adhesive tape * Metal plete,no magnetic substance Reader/ Writer Unit:mm Part No. A B Metal plate FFSX FFSX-.1-56T.1.16 FFSX-.2-56T.2.26 FFSX-.3-56T.3.36
7 SMARTPLY/FFS 23 Soft ferrite sintered into plate form Property Achieve a good balance between thinned ferrite and high-performance with the new manufacturing process Better insulation properties and more effective in suppression at low frequency compared to electromagnetic suppression sheets Attached easily with double-sided adhesive tape PET with adhesive layer Soft ferrite Double-sided adhesive tape Dimensions 1Soft ferrite 2Profile(PET with adhesive layer) Permeability The values are measured data for reference, not guaranteed. Double-sided adhesive tape Soft ferrite Adhesive layer PET/PET with adhesive layer Unit: mm Part No. A B C D FFS-.3-11T FFS T FFS-.3-22T FFS T FFS-.3-33T FFS-.3-55T FFS-.3-12T FFS-.3-23T
8 24 MAGNEFILM/MFM Effective for electromagnetic noise at low frequency and leakage of magnetic flux PET film (laminate) Magnetic metal material Magnetic foil laminated with plastic film. Magnetic metal foil + PET film Part No. MFM T MFM T (mm) Dimension (mm) Thickness (1MHz) Permeability 1 2( Magnetic foil) 1 4( Laminate) 2 ( Magnetic foil) 2 2( Laminate).2(Including adhesive layer) 65 Properties For Magnetic interference Magnetic measurement using a gauss meter For Electromagnetic wave Measurement of resistance element Electromagnetic noise suppression sheets Without MAGNEFILM With MAGNEFILM Magnet Magnet MFM: 12mm Shielding object Shielding object MAGNEFILM Reading Attenuation Resistance(Ω) MAGNEFILM Cable (no shielding) 1 1 Frequency(MHz) High loss effect is achieved at low frequency with MAGNEFILM on both sides of FPC (Length : 1cm). None 4.78mT - Magnetic foil 1 sheet 3.39mT 29% 2 sheets 2.14mT 55% (mt:milli-tesla)
ELECTROMAGNETIC NOISE SUPPRESSION SHEETS
Near field EMI suppression with easy assembly. Simply attach, sandwich and wrap around Magnetic metal filler typehigh performance Soft ferritestandard P19 P20 Ferrite sheet P22 P23 17 MAGNETIC FOIL Effective
More information26 lairdtech.com More Info: EXAMPLE APPLICATION PART NUMBER SYSTEM EXAMPLE
FERRITE EMI CABLE CORES FERRITE EMI DISKS AND PLATES Ferrite disks and plates provide a simple, cost-effective solution for radiated and inductively-coupled electromagnetic interference. After the PC board
More informationFerrite EMI Cable Cores
Ferrite EMI Cable Cores About Laird Laird is a global technology business focused on enabling wireless communication and smart systems, and providing components and systems that protect electronics. Laird
More informationEMC & RFI Products. EMC & RFI Products. OEM Electrical Insulation Tapes. OEM Liquid Resins. Heat Shrink
EMC & RFI Products For more than 40 years 3M Company has been one of the foremost sources of effective electromagnetic compatible (EMC) solutions. Many of the world s leading electronic and electrical
More information3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products Selection Guide Revision E 3 Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant
More information3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products 3Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant new problems. These solutions
More informationFILMS. Chang Sung Corporation
FILMS Divisions in CSC 7 Divisions, 1 R&D Center METAL POWDERS Cu & Cu-Alloys Ferrous Metals Tin, Ni, Al Alloys Ag, Ag Alloys Coated Powders POWDER CORES MPP Ces High Flux Ces Sendust Ces Mega Flux Ces
More information3M Electrically Conductive Adhesive Transfer Tape 9707
Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)
More informationSHIELAND. EMI Absorber Sheet. For EMI (SRA series) For NFC (STA Series) E-Song emc co., ltd. Absorber Div.
1 EMI Absorber Sheet For EMI (SRA series) For NFC (STA Series) 2 Product Overview and Structure Absorber is used to reduce overlap and interference of the radio waves due to noise (For EMI solution) or
More informationApplied Noise Control. D. W. Herrin, Ph.D., P.E. University of Kentucky Department of Mechanical Engineering
D. W. Herrin, Ph.D., P.E. Department of Mechanical Engineering Outline of Topics 1. Introduction 2. Noise Control at Source 3. Noise Control of Transmission Path 4. Protection at Receiver 5. Summary 2
More informationIntroduction of CSC Pastes
Introduction of CSC Pastes Smart Phones & Conductive Pastes Chip Varistors Chip Inductors LC Filters Flexible Printed Circuit Boards Electronic Molding Compounds ITO Electrodes PCB Through Holes Semiconductor
More informationConductive Product Information Sheet.
RF SOLUTIONS LTD. Unit 5 & 6, Wonastow Ind Est West, Wonastow Road, Monmouth, Monmouthshire. NP25 3JU Tel: 01600 719464 Fax: 01600 716963 email: info@finishingsolution.co.uk Website: www.finishingsolution.co.uk
More informationA Study of RF Absorber for Anechoic Chambers Used in the Frequency Range for Power Line Communication System
1014 Progress In Electromagnetics Research Symposium 2006, Cambridge, USA, March 26-29 A Study of RF Absorber for Anechoic Chambers Used in the Frequency Range for Power Line Communication System K. Shimada
More informationPRODUCT CATALOGUE PROFLEXR. Thermal Insulation. CFC free HCFC free Zero Ozone Depletion Potential (ODP) Taking care of energy and Environment
PRODUCT CATALOGUE PROFLEXR Thermal Insulation CFC free HCFC free Zero Ozone Depletion Potential (ODP) Taking care of energy and Environment PROFLEX Proflex polyolefin foam thermal insulation for AirConditioning,
More informationPSTC Tape Methods Criteria TENSILE ADHESION THICKNESS ELONGATION TAPE NO. DESCRIPTION PRINCIPAL USE (lbs/in) (oz/in) (mils) (%)
Page 89 16 Richmond Street Clifton, NJ 07015 (973) 772-6262 www.lamartcorp.com 100 1 mil clear polyester film coated on General purpose transparent polyester. 25 35 2.0 100 one side with an acrylic. Used
More informationSECTION MULTI-USE COMPOSITE ALUMINUM PANELS
SECTION 07416 MULTI-USE COMPOSITE ALUMINUM PANELS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationCARBON-GRAPHITE PRODUCTS PERMA-FOIL Graphite Sheet
CARBON-GRAPHITE PRODUCTS Graphite Sheet (1) (2) (3) (1) Roll Products (2) Punching Processed Product Samples (3) Punching Processed Product Samples Features of is a generic term for the flexible graphite
More informationANALYSIS OF THE EFFECT OF FERRITE TILE GAP ON EMC CHAMBER HAVING FERRITE ABSORBER WALLS
ANALYSIS OF THE EFFECT OF FERRITE TILE GAP ON EMC CHAMBER HAVING FERRITE ABSORBER WALLS Kefeng Liu EMC TEST SYSTEMS, L. P. 2205 Kramer Lane Austin, TX 78758 Abstract-It has been known that air gaps between
More informationDocument No. Rev Standard test methods for Nolato materials 4 Prepared by Checked Date Page Karin Sundberg Magnus Mattsson (8)
Karin Sundberg Magnus Mattsson 2012-02-17 1(8) 1. INTRODUCTION This document describes shortly the standard test methods used by Nolato for characterising electrically conductive silicone materials. Detailed
More informationGasket Material Type - Galvanic compatablity and Voltage differential
Galvanic relationship of Metals Gasket Material Type - Galvanic compatablity and Voltage differential Group Metallurgical Category EMF (Volt) Graphite Silver Glass Silver Aluminium Nickel Monel Stainless
More informationTemperature time profile this determines the grain growth, i.e. their final size in the order of some µm, and the properties of grain boundaries.
Custom Services for Magnetic Components A user guide to soft magnetic materials (part 3 of 4) Ferrites Soft magnetic ferrites are principally a ceramic material, i.e. sintered grains of non metallic (semiconducting)
More informationEMI Shielding Foam Gasket
www.nkcorp-inc.com NK CORPORATION INC. Acoustic Damping & Insulation Cleanroom Product EMI Conductive Elastomer EMI Shielding Molded & Extruded Rubber Thermal Management RFI Absorption 01 EMI Shielding
More informationConductive pre-pregs for composite components with shielding performance
Polyester 850011725 FARADAY P-N Nickel / epoxy resin R25T Polyester 850012625 FARADAY HC P-N High Conductivity Nickel / epoxy resin R25T Polyester 850012525 FARADAY G P-N Nickel / epoxy resin R25T Carbon
More information3M Electrically Conductive Cushioning Gasket Tape ECG-8035 / ECG-8055 / ECG-8075
Technical Data February, 2010 M Electrically Conductive Cushioning Gasket Tape ECG-805 / ECG-8055 / ECG-8075 Product Description M Electrically Conductive Cushioning Gasket Tapes ECG-805 / ECG-8055 / ECG-8075
More informationSmall and Lightweight Reactor for Boost Converter
FEATURED TOPIC Small and Lightweight Reactor for Boost Converter Shinichiro YAMAMOTO*, Kazushi KUSAWAKE, Junji IDO, Hajime KAWAGUCHI, Atsushi ITO and Masayuki KATO The number of motorized vehicles, such
More informationCoatings Spraying Service
Conductive Coatings Spraying Service EMC and Thermal Management Solutions Fothershield UNIT 3 GORRELLS WAY, TRANSPENNINE TRADING ESTATE ROCHDALE, LANCS, UK. OL11 2PX E info@fothershield.co.uk T W CONDUCTIVE
More information3M Thermally Conductive Adhesive Transfer Tapes
Technical Data April, 2008 M Thermally Conductive Adhesive Transfer Tapes Product Description M Thermally Conductive Adhesive Transfer Tapes 9882, 9885, and 9890 are designed to provide a preferential
More informationGlobal Precision Die Cut Solutions. the complete engineered solution
Global Precision Die Cut Solutions the complete engineered solution About Brady Corporation Founded in 1914 Headquartered in Milwaukee, WI Fiscal 2005 revenues $900M 6,700 employees worldwide 30 global
More informationThermal Management Catalog
Management Catalog P-THERM Interface Materials Polymer Science, Inc. offers a complete thermal management product line. Our P-THERM Interface Materials are designed to efficiently and effectively aid in
More informationSpecial characteristics This product is resin flux cored lead-free solder, Sn60Pb40 type, in MIL RMA class. High reliability flux
Special characteristics This product is resin flux cored lead-free solder, Sn60Pb40 type, in MIL RMA class. High reliability flux Test items 1.Flux content 2.Halide activator content test 3.Copper plate
More informationSTOCKWELL ELASTOMERICS
STOCKWELL ELASTOMERICS PROVIDING SOLUTIONS TO DESIGN CHALLENGES WITH HIGH PERFORMANCE ELASTOMERS ANALYTICAL INSTRUMENTATION TELECOMMUNICATIONS MEDICAL DIAGNOSTIC PORTABLE DATA ACQUISITION DEVICES INDUSTRIAL
More information3M XYZ / Isotropic Electrically Conductive Adhesive Transfer Tape 9709
Technical Data October, 2009 3M XYZ / Isotropic Electrically Conductive Adhesive Transfer Tape 9709 Product Description 3M XYZ/Isotropic Electrically Conductive Adhesive Transfer Tape 9709 is a pressure
More informationFERRITE CORES AND TILES
FERRITE CORES AND TILES 1. Shape factor (Se/Le): larger the shape factor, the higher the impedance. For the case of 1 pass through the core, a snug fit, and longer core is recommended as space permits.
More information3M Electrically Conductive Double-Sided Tape 9711S Series
Technical Data August 2017 3M Electrically Conductive Double-Sided Tape 9711S Series Product Description 3M Electrically Conductive Double-Sided Tape 9711S Series contains XYZ electrically conductive pressure
More informationRFID Tags and Readers
RFID Tags and Readers RFID Tagging RFID tagging is an ID system for identification and tracking purposes that uses radio frequency identification devices. An RFID tagging system consists of the tag, a
More informationLow frequency magnetic shielding: Nanocrystalline coating vs. ferromagnetic foils.
Low frequency magnetic shielding: Nanocrystalline coating vs. ferromagnetic foils. Nanovate -EM is an innovative direct coating technique proven to be a value-add alternative to conventional foils. Magnetic
More informationEpoxy. Epoxy 90, ,000. Epoxy. Epoxy. low ion content, Encapsulation of electronic
- - and Light Curing Adhesives Our comprehensive range of systems covers a multitude of applications and offers many advantages: systems are used in many fields in both trade and industry. adhesives and
More informationThermal Interface Material(TIM) Application Notes. Technical Document. Reference layout, design tips, guides, and cautions for GlobalTop GPS modules.
Technical Document Ver. A01 GlobalTop Technology Inc. Thermal Interface Material(TIM) Application Notes Revision: A00 Reference layout, design tips, guides, and cautions for GlobalTop GPS modules. prior
More informationEMI Conducted and Radiated Emissions
EMI Conducted and Radiated Emissions Mark Rine Product Manager VAC Magnetics March 2016 ADVANCED MATERIALS THE KEY TO PROGRESS Abstract This presentation overviews the EMC Conducted and Radiated Emissions
More informationEMI Conductive Elastomer CSM Series
TDS EMI Shielding Material V.A. EMI Conductive Elastomer CSM Series Product Technical Datasheet General Introduction The electrically conductive elastomers are composed by adding conductive particles into
More informationEIU 105 Types of Non-Electrical Insulation Materials
Potting compound in Housing EIU 105 Types of Non-Electrical Insulation Materials Section 1 General Description 1.1 The categories and terms used in this general category are used in reference to Electrical
More informationBonded Neo Magnetization Guide
Bonded Neo Magnetization Guide 1 Presentation Outline 1. Magnetizing Systems 2. Fixture Design 3. Construction 4. Testing 5. Design Study 2 Magnetizing Systems A typical magnetizing system consists of
More informationReference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification
Spec. No. JENF243E-0003Q-01 P 1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for
More information3M Electrically Conductive Cushion Gasket Tape
Technical Data December 2013 3M Electrically Conductive Cushion Gasket Tape ECG7033H ECG7053H ECG7073H Product Description 3M Electrically Conductive Cushion Gasket Tapes ECG7033H, ECG7053H, and ECG7073H
More informationSCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005
SCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005 LYDALL THERMAL / ACOUSTICAL GROUP MATERIAL TESTING LABORATORIES 1241 Buck Shoals Road Hamptonville, NC 27020 Mr. Bill Hammond Phone: 336 355 1507 MECHANICAL
More informationEMI/RFI: MATERIALS AND TECHNOLOGIES
EMI/RFI: MATERIALS AND TECHNOLOGIES PLS005M August 2016 Andrew McWilliams Project Analyst ISBN: 1-62296-337-7 BCC Research 49 Walnut Park, Building 2 Wellesley, MA 02481 USA 866-285-7215 (toll-free within
More informationThe Full Range for RFID
Your Global Automation Partner The Full Range for RFID Turck is a global leader in industrial automation technology. Over 4,000 employees in 28 countries strive to deliver the best sensor, connectivity,
More informationOUT OF AUTOCLAVE CURING OF THERMOSET MATERIALS
OUT OF AUTOCLAVE CURING OF THERMOSET MATERIALS A. Butragueño Martínez / R. Ávila Domínguez / P. Ponsaud / J. Sánchez Gómez Materials & Processes Department Composite Technology Airbus Getafe - Madrid ABSTRACT
More information3 Thermally Conductive Tapes
3 Thermally Conductive Tapes Technical Data July, 21 Product Description 3M Thermally Conductive Tapes 885, 881, and 8815 are designed to provide a preferential heat-transfer path between heat-generating
More informationAUTOMOTIVE AEROSPACE TRANSPORT MARINE MEDICAL TELECOMMUNICATIONS CONSUMER ELECTRONICS UTILITIES
ONE COMPANY MANY SOLUTIONS AUTOMOTIVE AEROSPACE TRANSPORT MARINE MEDICAL TELECOMMUNICATIONS CONSUMER ELECTRONICS UTILITIES ISO 9001:2008 Registered Quality System SAI Global File #004008 Burlington, Ontario,
More informationIPC A Guideline for Defining "Low- Halogen" Electronic Products. Working Draft. IPC-4903 August August 2010
IPC-4903 A Guideline for Defining "Low- Halogen" Electronic Products Working Draft August 2010 IPC-4903 August 2010 3000 Lakeside Drive Bannockburn, IL 60015-1249 Tel: 847-615-7100 Fax: 847-615-7105 www.ipc.org
More informationElectrical properties of fiber and carbon nanotube reinforced polymer composites
Materials Characterisation VI 309 Electrical properties of fiber and carbon nanotube reinforced polymer composites H. Estrada 2, J. Trovillion 1, L. S. Lee 2, M. Tusz 1, A. Kumar 1 & L. D. Stephenson 1
More information3M Electrically Conductive Gasket Tape MSG6000F Series
Technical Data June 6 3M Electrically Conductive Gasket Tape MSG6F Series Product Description consists of a conductive fabric, highly conductive grey foam, and black pressure sensitive adhesive (PSA).
More informationHEAT SPREADERS. Heat Spreaders. and C-Wing
T-Wing TM and C-Wing Chomerics family of thin heat spreaders provides a low-cost, effective means of cooling IC devices in restricted spaces where conventional heat sinks aren t appropriate. T-Wing spreaders
More informationZero Gauss Chambers MAGNETIC SHIELD CORPORATION. Perfection Mica Company
MAGNETIC SHIELD CORPORATION Perfection Mica Company 740 North Thomas Drive Bensenville, Illinois 60106-1643 U.S.A. FAX 630-766-2813 Phone 630-766-7800 www.magnetic-shield.com E-mail: shields@magnetic-shield.com
More informationStockmeier Urethanes Stobicast. Polyurethane Potting Compounds for Electrical Components
Stockmeier Urethanes Stobicast Polyurethane Potting Compounds for Electrical Components A leader in technical service, development and quality Stockmeier Urethanes Our Stobicast products provide customers
More informationSCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005
SCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005 LYDALL THERMAL / ACOUSTICAL GROUP MATERIAL TESTING LABORATORIES 1241 Buck Shoals Road Hamptonville, NC 27020 Mr. Shane Jolly Phone: 336 468 8598 MECHANICAL Valid
More informationNaNOcRysTallINE VITROPERM. EMc PROducTs. advanced MaTERIals THE KEy TO PROGREss
NaNOcRysTallINE VITROPERM EMc PROducTs advanced MaTERIals THE KEy TO PROGREss VITROPERM NaNOcRysTallINE EMc PROducTs VacuuMscHMElZE GmbH & co. KG (Vac) is a leading global manufacturer of modern magnetic
More informationmtc an acal group company Thermally Conductive Products
mtc MTC About us Features MODERN COMPANY WITH LONG TRADITION MTC is specialized on the protection of electronic circuits and the environment from high frequency electromagnetic radiation. Therefore we
More informationMulti-Aperture/Binocular Ferrite Cores 1/5
Multi-Aperture/inocular Ferrite Cores 1/5 1. 43 Material Characteristics This NiZn is our most popular ferrite for suppression of conducted EMI from 20 to 250. This material is also used for inductive
More informationEmbedded Planar Power Inductor in an Organic Interposer for Package-Level DC Power Grid
Embedded Planar Power Inductor in an Organic Interposer for Package-Level DC Power Grid Yuichiro Yazaki 1, Kazuma Ishidate 1, Kazuhiro Hagita 1, Yuta Kondo 1, Saki Hattori 1, Makoto Sonehara 1, Toshiro
More informationPRODUCT SPECIFICATION FOR APPROVAL
Issue : 151XC14C08005 Date of Issue : October 27.2008 DIGI-KEY CORPORATION : New Changed PRODUCT SPECIFICATION FOR APPROVAL Product Description Product Part Number : Common Mode Noise Filter (RoHS) : EXC14CE900U
More informationAudioflex. The efficient sound insulation
Audioflex The efficient sound insulation Greiner PURTEC Greiner PURTEC sets and raises the standards of insulation for warm water tanks. We focus on the requirements of the customers. We still set great
More informationMA Series 5.25 or /25V Commercial ABS Plastic Back Can Speakers
simply unique. MA Series 5.25 or 6.5 7/25V Commercial ABS Plastic Back Can Speakers SP5MAT SP6MAT 5.25 speaker 6.5 speaker Features Speco Technologies Multi-Application Series was designed to make the
More informationPreparation of Composite Materials of Silicon Rubber Reinforced by (CrMn x Ni 1-x FeO 4 ) for Microwave absorption at X-band
International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 11, Number 2 (2018), pp. 273-285 International Research Publication House http://www.irphouse.com Preparation of Composite
More information1/2W, 0805 Low Resistance Chip Resistor (Lead / Halogen free)
1. Scope 1/2W, 0805 (Lead / Halogen free) This specification applies to 1.2mm x 2.0mm size 1/2W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL
More informationJIS Z After 168hr Testing resistance. Condition B After 1008hr Testing
Special characteristics Technical data (LXB) This product is flux for flux cored wire solder in MIL-RA class. Test items 1.Halide activator content test 2.Copper plate corrosion test 3.Flux solution resistivity
More informationConductive Paper Containing Nickel Plated Pulp Fiber for Electric Field Shielding
Transaction Conductive Paper Containing Nickel Plated Pulp Fiber for Electric Field Shielding Takeshi Ueno 1, 2, Shohta Takemura 1, Masahiro Shimada 1, and Takayuki Okayama 2 1 Tokyo Metropolitan Industrial
More informationNANOCRYSTALLINE VITROPERM EMC COMPONENTS ADVANCED MATERIALS THE KEY TO PROGRESS
NANOCRYSTALLINE VITROPERM EMC COMPONENTS ADVANCED MATERIALS THE KEY TO PROGRESS VACUUMSCHMELZE NANOCRYSTALLINE VITROPERM EMC COMPONENTS VACUUMSCHMELZE GmbH & Co. KG (VAC) is one of the worldwide leading
More informationHIGH PERFORMANCE ACOUSTIC INSULATING MATERIAL FOR A QUIETER ENVIRONMENT
HIGH PERFORMANCE ACOUSTIC INSULATING MATERIAL FOR A QUIETER ENVIRONMENT Excellent at reducing the transmission of airborne sound Enhances the insertion loss performance of pipe insulation Flexible, easy
More informationStick your needs, DAEHYUN ST!
http://www.daehyunst.com Make your competitiveness more valuable Stick your needs, DAEHYUN ST! Head Office 237-4, Duckwoo-Ri, Paltan-Myeon, Hwaseong-Si, Gyeonggi-Do, South KOREA Tel.+82-31-353-6034~6,
More informationADVANCED TEXTILES WITH ENHANCED ELECTRICAL CONDUCTIVITY
ADVANCED TEXTILES WITH ENHANCED ELECTRICAL CONDUCTIVITY Veronika Tunáková, Jiří Militký Faculty of Textile Engineering, Dept. of Material Engineering, Studentská 2, Technical University of Liberec 461
More informationMULTISCALE HYBRID COMPOSITES FOR EMI SHIELDING
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS MULTISCALE HYBRID COMPOSITES FOR EMI SHIELDING J. Gnidakouong 1, Y.-B. Park 1*, J. W. Keum 2, H. S. Jeong 2, Y. B. Jung 2 1 School of Mechanical and
More informationEFFECTS OF CARBON FIBER ORIENTATION ON ELECTROMAGNETIC INTERFERENCE SHIELDING PERFORMANCES. M. Sharif, S. P. Chew, S. Shamini, M.N.
EFFECTS OF CARBON FIBER ORIENTATION ON ELECTROMAGNETIC INTERFERENCE SHIELDING PERFORMANCES M. Sharif, S. P. Chew, S. Shamini, M.N. Norazman Department of Electronics and Electrical Engineering, Faculty
More informationRecent Servomotor Technology
Recent ervomotor Technology Kenji Endo Akihide Mashimo Terufumi himizu 1. Introduction The trends toward compact-size and high-speed response of semiconductor manufacturing equipment and electronic parts
More informationGraphite Sheets Characteristics Thickness 0 0.±0.03 mm 0.07±0.015 mm 0.0±0.015 mm 0.0±0.012 mm Density 0.85 g/cm g/cm 3 1. g/cm g/cm 3 T
Graphite Sheets Graphite Sheets Type: EYG (Pyrolytic Graphite Sheet) is a thermal interface material which is very thin, synthetically made, has high thermal conductivity, and is made from a higly oriented
More informationCABLE MATERIALS CATALOG
CABLE MATERIALS CATALOG DEAR BUSINESS PARTNERS, Best wishes, Michael Xsu CONTENT Factory And Production Equipment 1 Quality Control 2 Copper Clad Aluminum Wire(CCA) 3 Copper Clad Aluminum Magnesium Wire(CCAM)
More information"ITO Film Trend for Touch Panel Applications"
AIMCAL Web Coating Conference 2011 October 23-26 Reno, Nevada USA 1 "ITO Film Trend for Touch Panel Applications" Teijin Chemicals Ltd. Haruhiko Itoh 2 Content 1. Structure and Features of TCF 2. Touch
More informationStockmeier Urethanes Stobicast. Polyurethane Potting Compounds for Electrical Components
Stockmeier Urethanes Stobicast Polyurethane Potting Compounds for Electrical Components Polyurethane Potting Compounds for Electrical Components Stobicast Stobicast polyurethane potting compounds are a
More information3 Specification 3.1 Dimensions Lites of overall dimensions ( x ) inches / mm.
1 General This glazing specification outlines the general considerations for glazing as used in security glazing applications (ballistic, bomb blast and burglary resistance). 2 Materials Minimum requirements
More informationAdvanced Materials and Design for Electromagnetic Interference Shielding
Advanced Materials and Design for Electromagnetic Interference Shielding Xingcun Colin Tong f-ep) CRC Press VV^ J Taylor&. Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor
More informationTERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE
TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE Hot Melt Formulation To optimise cost/performance, OREVAC Terpolymers are combined with EVATANE. Adhesion tests have been performed in a classical Hot
More informationRFID Tagging for Food Products
RFID Tagging for Food Products Terry Ye, Ph.D. Director of Research and Technology Development RFID Market Penetration Down to Consumers Hands Down to Item Level Warehouse, Distribution Ctr Retail Stores,
More informationLCP Film Special Solution Casting Technology Thermotropic Liquid Crystalline Polyester Film
LCP Film Special Solution Casting Technology Thermotropic Liquid Crystalline Polyester Film 1 Features 1 Utilizing our own developed special thermoplastic resin. Molecules will be aligned(liquid crystal
More informationSPECIFICATION USER: USER'S MODEL : MODEL: ELECTRO-MECHANICS [RECEIPT] Hereby received specification. -1/20- RECEIVED CHECK APPROVAL
SPECIFICATION USER: PRODUCT : ESD LC FILTER ARRAY USER'S MODEL : MODEL: [RECEIPT] Hereby received specification. y m d RECEIVED CHECK APPROVAL / / / ELECTRO-MECHANICS -1/20- DOCUMENT NO. DESIGN CHECK APPROV.
More informationCoatings. EMC and Thermal Management Solutions. +44 (0) Conductive
Conductive Coatings EMC and Thermal Management Solutions Fothershield UNIT 3 GORRELLS WAY, TRANSPENNINE TRADING ESTATE, ROCHDALE, LANCS, UK. OL11 2PX E info@fothershield.co.uk T W CONDUCTIVE COATINGS Page
More informationShielding Effectiveness Measurement of EMI Gaskets and Flange Treatments Subjected to Salt Fog Exposure (20 x 20 Aperture)
CHO-TM201 July/1992 Shielding Effectiveness Measurement of EMI Gaskets and Flange Treatments Subjected to Salt Fog Exposure (20 x 20 Aperture) Prepared By: David C. Inman Test Service Technical Manager
More informationA New Structural Bonding Process for Ferromagnetic Sheet Stacking used in Electric Motors (Rotors, Stators )
A New Structural Bonding Process for Ferromagnetic Sheet Stacking used in Electric Motors (Rotors, Stators ) Christophe Casteras *, Bruno Bonduelle** and Frederic Martin*** Abstract A new structural bonding
More informationReference Only. Spec. No. JENF243E-0002Q-01 P1 / 8
Spec. No. JENF243E-0002Q-01 P1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE31PT 1E9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for Large
More informationfax
/ tel. 2.33.61.16.26 www.elitaliaweb.it fax 2.26.26.1.9 info@elitaliaweb.it tel. 2.33.61.16.26 www.elitaliaweb.it fax 2.26.26.1.9 info@elitaliaweb.it TEL-M-SI ly and ly Conductive Silicone Foil TEL-M-SI
More informationB H. Magnetic materials
Magnetic materials In engineering applications the ferromagnets are used because of their high μ, which enable high magnetic induction to be obtained with only modest magnetic field. (Their ability to
More informationSP5MAT SP6MAT SP5MATB 5.25 speaker, black housing SP6MATB 6.5 speaker, black housing
MA Series 5.25 or 6.5 7/25V Commercial ABS Plastic Back Can Speakers SP5MAT SP6MAT SP5MATB 5.25 speaker, black housing SP6MATB 6.5 speaker, black housing Features Speco Technologies Multi-Application Series
More informationBondaTherm Key Features of the BondaTherm Equalizer Kits: Eliminates improper ratios and mixing errors Reduces material waste Eliminates employee contact with resins Eliminates messy hand mixing and transferring
More informationAffix Technology Sdn. Bhd.
Affix Technology Sdn. Bhd. Double Sided Foam Tapes Double Sided Foam Tape is made out of foam of PE, PU, PVC and EVA coated with various types of adhesive for various applications. This tape is available
More informationProduct Guide Specification
January 2015 Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat,
More informationAUTOMOTIVE AEROSPACE TRANSPORT MARINE MEDICAL TELECOMMUNICATIONS CONSUMER ELECTRONICS UTILITIES
ONE COMPANY MANY SOLUTIONS AUTOMOTIVE AEROSPACE TRANSPORT MARINE MEDICAL TELECOMMUNICATIONS CONSUMER ELECTRONICS UTILITIES ISO 9001:2008 Registered Quality System SAI Global File #004008 Burlington, Ontario,
More informationCOMPANY PROFILE A Y A G E O C O M P A N Y
COMPANY PROFILE A Y A G E O C O M P A N Y WHO WE ARE... Company profile Building on our Philips Magnetic Components heritage, FERROXCUBE can offer customers the highest level of support in the development
More informationHeritage Quality Performance
FEP FEATURES AND PROPERTIES Heritage Quality Performance Extruded, FEP insulated, high voltage wire and cable offers exceptional dielectric strength without the disadvantages common to equally rated silicone
More informationTotal Material Solutions for Noise & Vibration Control Namyang Novitech Creating Quiet Environment by Controlling Noise & Vibration
Total Material Solutions for Noise & Vibration Control Namyang Novitech Creating Quiet Environment by Controlling Noise & Vibration Creating Quiet Environment by Controlling Noise & Vibration Noise & Vibration
More informationSolving thermal management challenges in a minimum space
Solving thermal management challenges in a minimum space Electronic equipment needs an efficient means of managing and dispersing heat as systems continue to shrink in size. Heat is a killer for electronic
More information