MK POLYESTER RESIN CO.,LTD.
|
|
- Lynne Glenn
- 6 years ago
- Views:
Transcription
1 MK POLYESTER RESIN was founded in 2002 which located in 27/12 Moo1 Bangnamjued, Samutsakhon, Samutsakhon, Thailand. Till now, it has a history for almost 40 years. MK POLYESRER RESIN has become the leading supplier of raw material completely for Casting and Fiberglass products. We are exclusive agent of AkzoNobel to supply Butanox M 50 and Butanox M 60 in Thailand. Because of our experience, we choose the best product and the best price for customers We understand that the quality and price are important factors of purchasing decision for our clients. Our services include seminar and give counsel. Hope we can work together for our future. Tomorrow is answer today. 3
2 UNSATURATED POLYESTER RESIN FOR FRP VIAPAL VUP 355E/66 ESTAR R 135 NNN 230 kg General purpose FRP process Viscosity mpa.s Non thixopropic. Non wax. Gel time about 4 12 min. 230 kg General purpose FRP process Viscosity Poise Non thixopropic. Non wax. Gel time about 5 12min. R MK 753 R MK kg General purpose FRP process Viscosity Non thixotropic. Non wax. Gel time about 5 8 min. 230 kg General purpose FRP process Viscosity U W Non thixotropic. Non wax. Gel time about 5 8 min. DS 663 ER 2595i 220 kg General purpose FRP process Very good for winding glass fibers reinforced Good water resistance Base on DCPD type Non promote Viscosity Gel time about 7 10 min. 230 kg General purpose FRP process Viscosity Non thixotropic. Non wax. Gel time about min. MK 399 R MK 754 General purpose FRP process Promote. Viscosity Thixopropic. Non wax. Gel time about min. 230 kg General purpose FRP process Promote. Viscosity Thixopropic. Non wax. Gel time about min. 4
3 UNSATURATED POLYESTER RESIN FOR FRP ESTAR R 235 TPN SMF 7213 CN 220 kg General purpose FRP process Promote. Viscosity Thixotropic. Non wax. Gel time about min. 220kg /230 kg General purpose FRP process Promote. Viscosity Thixotropic. Non wax. Gel time about 15 25min. ER 2117 PT VIAPAL@VUP 9043/ kg General purpose FRP process Promote. Viscosity Thixopropic. Non wax. Gel time about min. 230 kg General purpose FRP process Promote. Viscosity Thixotropic. Non wax. Gel time about min. ESTAR R 127 TPN ESTAR R 290 General purpose FRP process Promote. Viscosity Thixotropic. Non wax. Gel time about 15 30min. 220 kg 210 kg Excellent chemical resistance. Base on Isophthalic acid Promote. Viscosity Poise Thixotropic. Non wax. Gel time about min. ESTAR H 6651 T Excellent chemical resistance. Base on Vinyl ester Non Promote. Viscosity poise Non thixotropic. Gel time about min. ESTAR H 6652 PT Excellent chemical resistance. Base on Epoxy Vinyl ester. Promote. Viscosity poise Non thixotropic. Gel time about min. 200 kg 200 kg 5
4 UNSATURATED POLYESTER RESIN FOR FRP SWANCOR CHEMPULSE kg /200 kg Excellent chemical resistance. Base on Bisphenol A type Epoxy Vinyl ester. Viscosity 350 +/ 100 (cps) 2 Non thixotropic. Non wax. Gel time 3 kind min min min. Check ratio on Datasheet of SWANCOR CHEMPULSE 901 Formulations are based 6% Cobalt Octoate (CoOct), MEKP(9.8% active oxygen), 100% dimethylaniline(dma), and 100% 2,4 pentanedione(2,4 P) SWANCOR CHEMPULSE 901 P 200 kg Excellent chemical resistance. Base on Vinyl ester resin Promote. Viscosity (cps) 2 Non thixotropic. Non wax. Gel time 3 kind min. (25 C, 55%MEKPO: 1.0phr) ETERSET 2960 P 5 Excellent chemical resistance. Base on Epoxy Base Vinyl ester resin. Promote. Viscosity poise Non thixotropic. Gel time about min. 200 kg 6
5 UNSATURATED POLYESTER RESIN FOR CASTING POLYLITE PC 600S R MK 456 General casting process. Good for clear casting. Viscosity Gel time about 8 10 min. General casting process. Viscosity Gel time about 5 9 min. 230 kg 230 kg R MK 457 General casting process. Medium viscosity Gel time about 8 10 min. 230 kg 230 kg VIAPAL@VUP 240 BE Clear casting process. High quality for casting resin. Promote. Viscosity Gel time about min. R MK 111 General casting process. Good for clear casting. Promote. Viscosity Gel time about min. 230 kg 20kg / 230 kg POLYLITE FG 208 Flexible resin. Low shrinkage. Base on Isophthalic acid Viscosity S U Gel time about12 20 min. SMG 9600 General casting process. Good for clear casting. Viscosity Gel time about 4 6 min. 7
6 UNSATYURATED POLYESTER RESIN FOR LAMINAT MK 5757 Laminate resin Excellent laminate. Excellent gloss Promote. Viscosity Suitable for coating decorative plywood Gel time about 4 6 min. SPACIAL RESIN EPOXY RESIN Epoxy resin. Good for laminate. Good for casting. Medium viscosity PU FOAM Polyurethane foam. Growth rate about 23 times. 5 kg 5 kg VIAPAL UP 001/ kg General purpose FRP process Suitable for make a Boat. Viscosity Non wax. Gel time about 8 16 min. Special for make a boat 8
7 FIBERGLASS CHOPPED STRAND MAT General purpose FRP process Suitable for hand lay up. E glass. Size number : 300, 450, 600 SURFACING MAT Use to close a fiberglass. Suitable for hand lay up and RTM process. Size number : 10,20,30 30 kgroll 200 meter / roll #100=250 m./roll #200=200m./roll GLASS FABRIC General purpose FRP process Suitable for hand ray up. E glass. Size number : 100, kg /roll WOVEN ROVING Use to close a fiberglass. Suitable for hand lay up and RTM process. Size number : 400,600, ,1000,and 1200 ROVING FOR FILAMENT For Filament process. E glass. Size number : 1200, 2400 and 4800 ROVING FOR SPRAY UP For Spray up process. E glass. Size number : 1200, 2400 and 4800 About 17 20kg/roll About 17 20kg/roll CHOPPED STRAND Fore FRP process. E glass. Size number : 3 mm., 6 mm. and 9 mm. CARBON FABRIC Carbon fabric Suitable for a strength reinforce. Have a plain weave and twill weave. Begin 1kg Begin 1 meter ( wide 150 cm. ) 9
8 GELCOAT GELCOAT 9091 Gelcoat for FRP process. Water resistance. Good surface hardness. Thixotropic. Medium viscosity Gel time 6 14 min. GELCOAT 9091 S Gelcoat for FRP process. Good resistance against UVlight good water resistance. Thixotropic. Medium viscosity Gel time 6 14 min. GELCOAT 9094 Gelcoat for FRP process. Water resistance. Good surface hardness. Thixotropic. Medium viscosity Gel time 6 14 min. GELCOAT 920 BSE Gelcoat for FRP process. For protective and decorative finishes on GR UP laminate. Base on Isophthalic acid Thixotropic. Preaccelerated. Medium viscosity Gel time 6 14 min. GELCOAT 2010 Gelcoat for FRP process. Water resistance. Good surface hardness. Thixotropic. Medium viscosity Gel time 6 14 min. 20 kg TOOLING GELCOAT Gelcoat for FRP process. High chemical resistance. Good surface hardness. Base on Viny ester Thixotropic. Medium viscosity Gel time 6 14 min. 10
9 CATALYST BUTANOX M 60 MEKP for mix in resin to make a hardness. High quality High safety BUTANOX M 50 MEKP for mix in resin to make a hardness. High quality High safety 5 kg 5 kg BUTANOX M 60 ( 30 Kg.) MEKP for mix in resin to make a hardness. High quality High safety MEPOXE M MEKP for mix in resin to make a hardness. High quality High safety 30 kg 5 kg COBALT 10% Accelerator content 10% For FRP casting,filler casting and color casting. High quality RP 51 Accelerator content 3% For clear casting High quality 4 kg / 15 kg / 200 kg 4 kg / 15 kg PROMOTER A Promoter content 1% For button casting High quality DMA DMA The special accelerater for use to mix in bisphenol and vinyl ester. High quality 15 kg 5 kg 11
10 SILICONE RUBBER SILICONE MK 585 SILICONE MK 586 Silicone rubber for molding. Viscosity 40,000 45,000 Hardness ( shore A ) Silicone rubber for molding. Viscosity 45,000 50,000 Hardness ( shore A ) SILICONE MK 303 ELASTOSIL 4503 Silicone rubber for molding. Viscosity 38,000 40,000 Hardness ( shore A ) 25 Silicone rubber for molding. Viscosity 45,000 Hardness ( shore A ) kg SILASTIC 3481 SILASTIC 3483 Silicone rubber for molding. Viscosity 25,000 Hardness ( shore A ) 21 Silicone rubber for molding. Viscosity 20,000 Hardness ( shore A ) kg 20 kg RUBBER TREE Silicone rubber for molding. Air dry. 20 kg 12
11 SOLVENT STYRENE MONOMER Mix in resin for dilute resin and gel coat ACETONE Use for cleansing resin and equipments. 180 kg 160 kg THINER AAA Use for cleaning resin and equipments. Suitable for mix in colors. THINER AA Use for cleaning resin and equipments. Drum Drum MONOWAX Use for cleansing resin and equipments. Suitable for mix in colors. CAUSTIC SODA Mix in water for cleaning surface products and to removes stains. 5 kg 13
12 MOULD RELEASE TR 104 Mold release. highest quality and excellent release The wax color is blue. Easy to used. TR 1000P Mold release. highest quality and excellent release The wax color is cream. Easy to used. 1 can =14 OZ. 1 can = 15 OZ. TR 216 Mold release. highest quality and excellent release Liquid mould release Easy to used. PVA PVA Mold release. Water base. Easy to used. 5 kg CANA CREAM For clean surface car and fiberglass products.. High gloss. Easy to used. VASELINE Mold release. Easy to use. 1 can = 220 g 1 kg 14
13 FILLER CALCIUM 28X CALCIUM 9QQ Mix in the resin For make a filler. suitable for filler casting. 325 mesh. Mix in the resin For make a filler. suitable for filler casting. 325 mesh. TALCUM TALCUM APDD Mix in the resin For make a filler. suitable for FRP & Casting. 325 mesh. Mix in the resin For make a filler. suitable for FRP & Casting. 325 mesh. CAB O SIL ( WACKER ) CAB O SIL ( M 5 ) Mix in resin for make a thixotropic and make gel coat. Suitable for FRP. Mix in resin for make a thixotropic and make gel coat. Suitable for FRP. 10 kg 10 kg TITANIUM MICRO BALLOON Mix in resin for make a white and easy to polish. Suitable for casting resin. Mix in the resin For make a filler. Make a light weight and strong surface. Suitable for FRP kg 15
14 FILLER GYPSUM PLASTER For casting and for make a mould. GYPSUM PLASTER For casting and for make a mould. 25kg GYMSUM PLASTER For casting and for make a mould. Slowly to dry. 16
15 ACCESSORY AND EQUIPMENT SHEEP WOOL ROLLER Dip in resin and pain on mould or fiberglass. Size 4 inch and 6 inch. SYNTHETIC WOOL ROLLER Dip in resin and pain on mould or fiberglass. Size 4 inch and 6 inch. HANDLE ROLLER The handle roller of sheep wool roller and white roller. BRISTER ROLLER Roller on fiberglass for attack bubbles. Size 4 inch and 5 inch. HANDLE OF SYNTHETIZE WOOL ROLER The handle roller of Synthtize wool rollers. ALUMINIUM ROLLER Roller on fiberglass for make a smooth surface and attack a bubbles. Size 2 inch and 4 inch. PIGMENT ( MATAPEL) PIGMENT ( VIGA ) 1kg / 5 kg / Use to mix in resin for make a color. Liquid type. High heat resistance Non toxic Free solvent 1kg / 5 kg / For make a thickness of fiberglass products. Size 6mm., 10mm., 15mm. and 20mm. 17
16 ACCESSORY AND EQUIPMENT HARD CLAY For sculptures and elements for make a mould Packaging 5 kg. SORFT CLAY For sculptures and elements for make a mould Packaging 5 kg. 5 kg / piece 24 piece / package COTTON MAT The elements for make a silicone moulds. Size 6 inch and 9 inch. POLISHIG UP resin for FRP Suitable for hand lay up Orthotropic type Non promote Medium viscosity 3 4 kg / piece WAX For sculptures to make a prototype. Packaging 5 kg. PAIL Production of zinc and a good Rust coating. for keep any raw material. Capacity 20 liters. PAINT BRUSH For pain a color and resin. Size 2 inch, 2.5 inch and 3 inch. SILICONE OIL Mix in silicone for make a low viscosity and for make a soften silicone. 5 kg 18
17 ACCESSORY AND EQUIPMENT HAND SPRAY GUN X 202 G25 Spray for FRP work, metal work wood work and automobile. Gravity feed type. The spray partway is made of stainless. Nozzle 2.5 mm. made of stainless. High quality HAND SPRAY GUN R 871 +W/CUP Spray for Gelcoat and glue. For high viscosity spray painting. Pressure feed type. Nozzle 2.5 mm. made of stainless. Save time to work. High quality 1 piece ( size : 115cm. X 230 cm.) HONEY COMB For make a thickness of fiberglass products. Size 6mm., 10mm., 15mm. and 20mm. COREMAT ( UPICA MAT ) For make a thickness of fiberglass products. Size 3mm., 4mm., 5mm. ( thickness ) PORTABLE ELECTRIC SCISSORS Use for cutting fiberglass, cloth, carbon fabric, paper etc. Save time make more value. Easy to use Can use direct to electric and use by battery. 19
18 BIO CLEAN ING AND TREATMENT SURFACE CLEANER F.O.G DIGESTER Bio cleaning and treatment by enzymes, microbes and surfactants. Cleaning and treatment fat, oil, grease, dirt, organic materials and odors caused. Reduces odors caused by rancid F.O.G built up. Enhances the efficiency of wastewater treatment. Can cleaner factory, house, farm, toilet more surface. Non toxic. Easy to use ( mix in water before use ) 250 ml. 1 liter 5 liter 20 litter GERM KILLER BLOOD SCALE & OIL REMOVER Kills 99.9% of germ., E.Coli, Salmonella sp., and H1N1 Virus with natural peroxide. Remove blood, scale, grout stain with the power of peroxide. Remove oily, food stains and deodorizers the kitchen to eliminate food odor. Cleans and prevents mold and mildew. Readily biodegradable. Ecologically sound with an effective extra oxygen atom. Non toxic. Easy to use ( spray in the air or spray on surface and clean ) ODOR NEUTRALIZER Eliminates and cleans odor from degradable organic wastes. Remove blood, scale, grout stain with the power of peroxide. Strongly neutralizers hydrogen sulfide or unpleasant odors with the natural power of peroxide. Instantly controls odor without using overpowering masking scents or chemicals. Ecologically sound with an effective extra oxygen atom. Non toxic. Easy to use ( spray in the air or spray on surface and clean ) 20
page 2 of 7 INTRODUCTION Products made from glass-fibre reinforced unsaturated polyester resins are produced from negative moulds. In order to achieve
page 1 of 7 CONTENTS De IJssel Coatings B.V. supplies a full range of coatings and construction materials for new building, repair and maintenance of pleasure Boats. All products in the range are carefully
More informationTechnical Datasheet Ashland Performance Materials
Document 1701 V3 F2, Language EN V1, Approved 2011-6-29, 2011 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 411-350 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and provides resistance to a
More informationTechnical Datasheet Ashland Performance Materials
Document 1200 V3 F2, Language EN V1, Approved 2011-6-29, 2011 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 510 C-350 is a brominated epoxy vinyl ester resin that offers a high degree of fire retardance while
More informationTechnical Datasheet Ashland Performance Materials
Document 2067 V4 F2, Language EN V1, Approved 2011-6-29, 2011 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties
More informationMANUFACTURING WITH COMPOSITES 1
MANUFACTURING WITH COMPOSITES 1 WCC WEBINAR 3 rd June 2011 1 AIMS OF WEBINAR To give an overview of the most important manufacturing methods for composite materials Covering suitable materials, typical
More informationCall Today. Offering Full Technical Support.
Quality Products Exceptional Service Since 1986 Call Today 01692 406822 Issue 1.1 Polyester Resins & Fillers Bondaglass PAGE 1-2 Upol PAGE 2 Marine Industrial PAGE 2-4 West System PAGE 4 Hints & Tips PAGE
More informationDERAKANE MOMENTUM Epoxy Vinyl Ester Resin
Document 1701 V1 F2, Language EN V1, Approved 2008-9-8, 2009 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 411-350 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and provides resistance to a wide
More informationDERAKANE Epoxy Vinyl Ester Resin
DERAKANE 411-45, Document 1756 V1 F2, Language EN V1, Approved 2008-9-8, Page 1 (5) DERAKANE 411-45 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and has become an "industry standard" due
More informationDERAKANE MOMENTUM 510 C-350 Epoxy Vinyl Ester Resin
Document 1200 V1 F2, Language EN V1, Approved 2008-9-9, 2009 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 510 C-350 is a brominated epoxy vinyl ester resin that offers a high degree of fire retardance while
More informationDERAKANE Epoxy Vinyl Ester Resin
Document 1767 V1 F2, Language EN V1, Approved 2008-9-9, 2009 Ashland Inc. Page 1 (5) DERAKANE 441-400 epoxy vinyl ester resin is a lower styrene-content resin that has an optimized epoxy backbone and resulting
More informationThis rule is applicable to the manufacture of products from or the use of polyester resin material, including touch-up, repair and rework activities.
VENTURA COUNTY AIR POLLUTION CONTROL DISTRICT RULE 74.14 POLYESTER RESIN MATERIAL OPERATIONS (Adopted 11/24/87, revised 5/26/92, 4/12/05) A. Applicability This rule is applicable to the manufacture of
More information- An alternate for low styrene content (HAP) is available as DERAKANE resin.
Document 1228 V5 F2, Language EN V1, Approved 2015-9-16, 2016 Ashland Inc. Page 1 (5) DERAKANE 411-350 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and has become the "industry standard"
More informationNew High Temperature Resistant Vinyl Ester
New High Temperature Resistant Vinyl Ester Bruce Curry September, 2005 ABSTRACT There has been a need for a high temperature resistant vinyl ester for pipes to carry hot gases, for reinforcement in dual
More informationPatcham Additives for UPR Systems. Complete Package of various additives and their performance
Patcham Additives for UPR Systems Complete Package of various additives and their performance Contents UPR Industries Patcham Additives Defoamers Surface Modifiers Rheology Modifiers Wetting and Dispersing
More informationMODEL, MOULD & PRODUCT Systems for models
MODEL, MOULD & PRODUCT Systems for models Introduction The model Finishing the model The mould Production of the mould Paintsystems for models www.de-ijssel-coatings.nl January 15 page 1 of 7 MODEL, MOULD
More informationDERAKANE MOMENTUM Epoxy Vinyl Ester Resin
Document 2067 V1 F2, Language EN V1, Approved 2009-5-5, 2009 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties
More informationEurogel GCP / GCTC 500 Series Iso-modified
Eurogel GCP / GCTC 500 Series Iso-modified s : Industrial, Transportation, Building, General purpose. Standard quality gelcoat, with stable storage and application properties. Good protection for polyester
More informationMethods and Materials for Improving Cosmetic Finishes
Methods and Materials for Improving Cosmetic Finishes Speakers from Polynt Composites Andrea Rebecchi, Technical Service UPR & GC Marco Dainelli, Technical Service UPR & GC RAMSPEC - 12.10.2016 1 Methods
More information21. Fiber-Reinforced Plastic Manufacturing Industry
PRTR Estimation Manual 21. Fiber-Reinforced Plastic Manufacturing Industry January 2001 The Japan Reinforced Plastic Society Contents 1. Introduction...1 2. Chemical Substances Requiring Notification...1
More informationFIBERGLASS REINFORCED PLASTIC (FRP) LAUNDER COVERS
FIBERGLASS REINFORCED PLASTIC (FRP) LAUNDER COVERS PART 1 GENERAL 1.1. SUMMARY A. This Section includes fiberglass reinforced plastic (FRP) launder covers for clarifier basins and other applications as
More informationDION 9800 (Formerly ATLAC & A) Urethane Modified Vinyl Ester Resins
July 16, 2003 (Formerly ATLAC 580-05 & 580-05A) Urethane Modified Vinyl Ester Resins DESCRIPTION is a premium urethane modified vinyl ester resin with many unique features. The urethane modification creates
More informationHIGH QUALITY MATRIX RESINS. UP-Resins, VE-Resins & Epoxy Systems. Composites
HIGH QUALITY MATRIX RESINS UP-Resins, VE-Resins & Epoxy Systems Composites Copyright: delphiayachts.eu Abbreviations for base resins BPA bisphenol A VE vinyl ester VEU vinyl ester urethane EN epoxy Novolac
More informationFABRICATION GUIDELINES
FABRICATION GUIDELINES Slide 1 Fabrication Guidelines AOC VIPEL Corrosion Resistant Resins Slide 2 Terminology FRP FIBERGLASS REINFORCED PLASTIC; RTP REINFORCED THERMOSET PLASTIC; GRP GLASS REINFORCED
More informationTechnical Datasheet Ashland Performance Materials
Document 2161 V2 F2, Language EN V1, Approved 2008-12-29, 2011 Ashland Inc. Page 1 (8) HETRON FR992 resin is a low viscosity, unpromoted, flame retardant (1) patented epoxy vinyl ester with F-Cat technology.
More informationRESINS FOR COMPOSITES
THERMOSET RESINS FOR COMPOSITES HELIOS RESINS FOR COMPOSITES OFFER FLEXIBLE HIGH-QUALITY RELIABLE COMPOSITE SOLUTIONS. RESINS SUPPLIER SINCE 18 Composite resins since 1964 GOLDEN RESINS DEVELOPED BY ADVANCED
More informationBÜFA -Special products. Process Solutions. Special products
BÜFA - Process Solutions BUEFA_Gelcoatplus_Spezialitaeten_Folder.indd 1 14.10.11 08:29 BÜFA -Special Resins Quality... that stands for the extensive BÜFA-assortment of special products. For tooling, reactivity
More informationPolyester Resin Price List
September-08 Polyester Resin Price List Polysil Ltd, 1 Carterton Road, Carr Lane Industrial Estate, Hoylake, Wirral, CH47 4FD Tel: 0151 632 4414 Fax: 0151 632 2807 Email: sales@polysil.co.uk Web: www.polysil.co.uk
More informationProfessional Quality Materials
Since 1970 Professional Quality Materials Formulated Exclusively for the Reinforced Composites and Cast Polymer Industries RELEASES COMPOUNDS POLISHES SEALERS Serving the FRP and Cast Polymer markets for
More informationViscosity, Brookfield # 2 30 rpm 425 mpas (cps) Percent Solids 57 % Color <5 Gardner Specific Gravity 1.16 gm/cc
Document 2907 V5 F2, Language EN V1, Approved 2015-9-16, 2016 Ashland Inc. Page 1 (5) DERAKANE 510 B-400 Epoxy Vinyl Ester Resin is a low viscosity, unpromoted, flame retardant (1) epoxy vinyl ester. This
More informationWorking with OLDOPAL -Gelcoats
Working with OLDOPAL -Gelcoats In General Gelcoats are usually transparent or pigmented layers of pure resin that form the surface of mouldings made from unsaturated polyester resin. The requirements on
More informationRULE POLYESTER RESIN OPERATIONS (Adopted & Effective 5/11/16)
RULE 67.12.1 POLYESTER RESIN OPERATIONS (Adopted & Effective 5/11/16) (a) APPLICABILITY (1) Except as otherwise provided in Section (b), this rule is applicable to all polyester resin operations, including
More informationSPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC CHEMICAL STORAGE TANKS
The following specification for FRP Chemical Storage Tanks has been developed to assist the specifier and the buyer in detailing their own specification for equipment that meets the minimum design parameters
More informationPOWERFUL CONNECTIONS. Bonding Pastes, Fillers & High Performance Adhesives. Composites
POWERFUL CONNECTIONS Bonding Pastes, Fillers & High Performance Adhesives mposites pyrights: VDL Bus & ach Our recommendations for you: Working parameters Use at least 1.5 % Working temperature between
More informationPerry Fiberglass Products, Inc. LEADERS IN FIBERGLASS REINFORCED PLASTIC DUCT PRODUCTS
5415 VILLAGE DRIVE ROCKLEDGE, FL 32955 JOINING PROCEDURES FOR WET LAY-UP PAGE 1 JOINING PROCEDURES FOR FIBERGLASS REINFORCED PLASTIC (FRP) RESIN FABRICATORS WET LAY-UP BONDING INSTRUCTIONS Job Preparation:
More informationRAKU-TOOL. Product Overview. Product Overview All RAKU-TOOL products at a glance.
RAKU-TOOL Product Overview GB www.rampf-gruppe.de Product Overview All RAKU-TOOL products at a glance. RAMPF Tooling RAKU-TOOL Product Overview Epoxy Systems 2 Epoxy Resin Epoxy Hardener Mix ratio (pbw)
More informationCOMPOSITE POLYMERS. Table of Contents A GUIDE TO FABRICATING COMPOSITES SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5
COMPOSITE POLYMERS A GUIDE TO FABRICATING COMPOSITES Table of Contents SECTION 1 Product Description Description of HETRON and AROPOL Resins...................................... 2 SECTION 2 Initiators,
More informationGLOSSARY OF TERMS. 8/23/2010 Fiberglass Coatings, Inc. 1 (800)
GLOSSARY OF TERMS A accelerator An additive to polyester resin that reacts with the catalyst to speed up polymerization. This is required in room temperature cured resins. See Promoter. acetone In an FRP
More informationGuidelines for Calculating Emissions from Polyester Resin Operations (December 2016)
Guidelines for Calculating Emissions from Polyester Resin Operations (December 2016) The purpose of this document is to provide operators with guidelines in estimating volatile organic compound (VOC) emissions
More informationSurf Clear EVO Epoxy system for surfboards
Page 1 / 6 Surf Clear EVO Epoxy system for surfboards Sicomin Surf Clear EVO epoxy system is specially formulated for the manufacturing of surf boards. Surf Clear EVO is suitable for hand lay up of glass,
More informationCRYSTIC 125 PA. General Purpose Polyester Resin
CRYSTIC 125 PA General Purpose Polyester Resin Introduction CRYSTIC 125 PA is a quality orthophthalic based unsaturated polyester resin developed specifically for the manufacture of GRP mouldings. CRYSTIC
More informationApplication Appearance Viscosity Geltime
AYISWARYA POLYMERS THE COMPANY PROFILE Ayiswarya Polymers established in 1997, has created reputation for technical enterprise in the eld of Unsaturated Polyester Resins, to support industries like Marine
More informationPerry Fiberglass Products, Inc. LEADERS IN FIBERGLASS REINFORCED PLASTIC PIPE PRODUCTS
5415 Village Drive Rockledge, FL 32955 PHONE: 321 609 9036 FAX: 321 609 9003 JOINING PROCEDURES FOR WET LAY-UP PAGE 1 JOINING PROCEDURES FOR FIBERGLASS REINFORCED PLASTIC (FRP) RESIN FABRICATORS WET LAY-UP
More informationComposites. additives and its performances
Patcham Additives for Composites Complete Package of various Complete Package of various additives and its performances Contents UPR Industries Patcham Additives Defoamers Surface Modifiers Rheology Modifiers
More informationPOLYLITE Shrink Control Tooling System
September 2004 POLYLITE 33540-00 Shrink Control Tooling System DESCRIPTION POLYLITE Profile 33540-00 is a MACT-compliant, shrink-controlled resin system with a 14-year track record of revolutionalizing
More informationEpobond RS-T30 and RS-T35
Product Data Epobond UP Gelcoats A tough UP gelcoat system formulated specifically for use in conjunction with our range of epoxy laminating systems. Epobond RS-T30 and RS-T35 Applications Aircraft Automotive
More informationThe whole ICR production in a complete and. updated survey. An extremely wide range of. products deriving from a perfect synergy of
MARINE The whole ICR production in a complete and updated survey. An extremely wide range of products deriving from a perfect synergy of technological specialization, industrial chemical know-how and marketing
More informationGelcoats and Topcoats. High Gloss Surfaces
High Gloss Surfaces Gelcoats and Topcoats Copyright: delphiayachts.eu Gelcoats and Topcoats Layers just 500-600 μm thick... and yet the selection of the right gelcoat is absolutely decisive for the final
More informationGELCOATS AND TOPCOATS
REACTIVE RESINS GELCOATS AND TOPCOATS Gelcoats and Topcoats REACTIVE RESINS GELCOATS AND TOPCOATS A mere 500-600 µm layer thickness...... and yet the choice of the right gelcoat is decisive for the final
More informationEnzyme Wizard Multi Enzyme cleaning formulations contain ingredients that are naturally occurring. They consist of four main ingredients natural
Safe for people, pets and the planet. Enzyme Wizard cleaning products are 100% biodegradable - no caustic chemicals soap free - ph neutral - totally eco-friendly. Enzyme Wizard Multi Enzyme cleaning formulations
More informationLow Profile Tooling Systems RESINS and GELCOATS for SMOOTHER, MORE DURABLE MOLDS
Low Profile Tooling Systems RESINS and GELCOATS for SMOOTHER, MORE DURABLE MOLDS CREATE BETTER TOOLS AOC Aliancys low profile resins and tooling gelcoats help manufacturers create smooth, lower cost molds
More informationSolving Corrosion Problems with VIPEL Composites
Solving Corrosion Problems with VIPEL Composites Slide 1 Welcome to the seminar on Solving Corrosion Problems with Fiberglass Composites. The Solution is AOC VIPEL, CORROSION RESISTANT RESINS Slide 2 Shows
More informationLaminates based on DION FR 9300 have passed ICBO Acceptance Criteria for Class V Duct. Meets MIL-R-24719(SH) Grade B Class 1
June 2004 DION FR 9300 Brominated BisphenolEpoxy Vinyl Ester Resins DESCRIPTION The DION FR 9300 series of resins are flameretardant brominated, bisphenolepoxy vinyl esters that provide corrosionresistance
More informationProject Summary. Evaluation of Pollution Prevention Techniques to Reduce Styrene Emissions from Open Contact Molding Processes
United States National Risk Management Environmental Protection Research Laboratory Agency Research Triangle Park NC 27711 Research and Development EPA/600/SR-97/018 September 1997 Project Summary Evaluation
More informationGrowth Opportunities in the Global Composites Market
Growth Opportunities in the Global Composites Market Published: May 2016 Trends, opportunities and forecast in this market to 2021 by fiber type (fiberglass, carbon fiber, aramid fiber), resin type (thermoplastic,
More informationPowell. Sodium Hypochlorite Fiberglass Reinforced Plastic (FRP) Storage Tanks
Powell Fabrication & Manufacturing Inc Last Updated: April 21, 2000 Sodium Hypochlorite Fiberglass Reinforced Plastic (FRP) Storage Tanks Part 1 General 1.01 Section includes A. Design and furnishing of
More informationCHAPTER - 1 INTRODUCTION
CHAPTER - 1 INTRODUCTION 1. 1.1 Polymer Matrix Composites Composite materials are formed by combining two or more materials that have different properties. The constituent materials work together to give
More informationDION FR Brominated Bisphenol- A Epoxy Vinyl Ester Resins. Revision date (March, 2011) DESCRIPTION
Revision date (March, 2011) Brominated Bisphenol A Epoxy Vinyl Ester Resins DESCRIPTION The series of resins are flameretardant brominated, bisphenola epoxy vinyl esters that provide corrosionresistance
More information- TABLE OF CONTENTS -
- TABLE OF CONTENTS - SINGLE WALL SPECIFICATIONS SECTION 1. APPLICABLE STANDARDS PAGE 1 2. INFORMATION TO BE SUPPLIED BY CUSTOMER PAGE 2 3. MATERIALS PAGE 2 4. LAMINATE CONSTRUCTION PAGE 3 5. LAMINATE
More informationLow Styrene Content Filled Resin Systems
Low Styrene Content Filled Resin s Margie Smith-Krantz Oct. 3-6, 2001 ABSTRACT low styrene unsaturated polyester resins have been developed for the filled market segment. These polyesters maintain viscosity
More informationPOLYLITE TLP Series Low-Profile, Low-Styrene Marine Laminating Resins
August 2012 Low-Profile, Low-Styrene Marine Laminating Resins DESCRIPTION of resins are pre-promoted(*), thixotropic (*), low-profile, unsaturated polyester resins developed for fabricating small to large
More informationComposite Materials. Manufacturing processes for Polymer Matrix Composites
Composite Materials Manufacturing processes for Polymer Matrix Composites Polymer Matrix Composites The method of manufacturing composites is very important to the design and outcome of the product With
More informationM01C14 Adhesive resin
M01C14 Adhesive resin on polyester base filled with short glass fibers, contains a color indicator which shows the addition of peroxide M01C14 offers excellent flexibility and adhesive strength Due to
More informationTrigonox 239. Product Data Sheet. Product description. Specifications Appearance : Clear liquid. Characteristics Density, 20 C : g/cm 3.
Product Data Sheet Trigonox 239 Product description Cumyl hydroperoxide 45% solution in solvents CH 3 C O OH CH 3 Molecular weight : 152.2 Active oxygen content peroxide : 10.51% actual product : 4.73-4.94%
More informationCHAPTER 3 PROPERTIES OF GFRP MATERIALS
39 CHAPTER 3 PROPERTIES OF GFRP MATERIALS 3.1 GENERAL FRP composites are a state-of-the-art construction material, an alternative to traditional materials such as concrete, steel and wood. Among many applications
More informationComposites. Product range and pricing. Contents
Product range and pricing Composites UK Contents Resins... 2 Resins Epoxy... 5 Catalysts... 8 Accelerators... 9 Structural adhesives...10 Carbon reinforcement...12 Reinforcements...13 Infusion Reinforcements...15
More informationTooling Resins FOR SMOOTHER, MORE DURABLE MOLDS
Tooling Resins FOR SMOOTHER, MORE DURABLE MOLDS MoldTru Tooling Resins for smoother, lower cost molds in less time MoldTru tooling resins sharpen the competitive edge by providing a smoother tooling surface
More informationSteel Rehabilitation Resins MIR-940 & MIR-950
Steel Rehabilitation Resins MIR-940 & MIR-950 Introduction Mirteq s steel primer and vinyl ester based, micro-fiber reinforced resins have been custom formulated for sealing and refurbishing steel structures,
More informationMGH SERIES HydroShield7 HIGH PERFORMANCE GEL COAT
Product Data 908 LENOIR ROAD POST OFFICE BOX 1809 HICKORY, NORTH CAROLINA 28603-1809 TELEPHONE (828) 328-1721 TOLL FREE (800) 334-5975 FAX (828) 328-4572 MGH SERIES HydroShield7 HIGH PERFORMANCE GEL COAT
More information- TABLE OF CONTENTS -
- TABLE OF CONTENTS - DOUBLE WALL SPECIFICATIONS SECTION 1. APPLICABLE STANDARDS PAGE 1 2. INFORMATION TO BE SUPPLIED BY CUSTOMER PAGE 2 3. MATERIALS PAGE 2 4. LAMINATE CONSTRUCTION PAGE 3 5. LAMINATE
More informationchromalok Adhesives for Countertop Industry
chromalok Adhesives for Countertop Industry ChromaLok - Color Matched Adhesive System ChromaLok is a line of high quality color matched adhesives specifically designed for the surfacing industry. These
More informationCertified Composites Technician Study Guide and Test Preparation
American Composites Manufacturers Association Certified Composites Technician Study Guide and Test Preparation CCT Compression Molding Modules 1-7 American Composites Manufacturers Association 2004 When
More informationTable of content of printouts:
Table of content of printouts: Introduction Materials and Properties of Polymer Matrix Composites Mechanics of a Lamina Laminate Theory Ply by Ply Failure Analysis FRP Strengthening of Metallic Structures
More informationCleaner, Smarter, Cheaper: Towards a safe and clean Polyester Workshop
Cleaner, Smarter, Cheaper: Towards a safe and clean Polyester Workshop The European UP/VE Resin Association 1 Introduction: When using unsaturated polyester resins (UPR) for the production of composite
More information4 polrespolyester.com
Casting Type Polyester Resins Enginered Stone PRE-31 is an orthophthalic, clear, medium reactive, low viscosity, low shrinkage, fit for hot curing polyester resin that is highresistance to atmospheric
More informationThe Choice for RTM Light
RTM Light The Choice for RTM Light Achieving a better part performance, a cleaner working environment and reduced styrene exposure and emissions are major challenges for the composites industry. For that
More informationEvaluation Guide for Selecting the Best FRP Composite Process for Your Project
19 48-2018 Evaluation Guide for Selecting the Best FRP Composite Process for Your Project Liquid Composite Molding (LCM) vs. SMC ABSTRACT In this report, we compare and contrast the properties of the two
More informationSURFACE PROFILE AND SURFACING VEIL: REDUCING PRINTOUT WITH A RESIN-RICH SURFACE
SURFACE PROFILE AND SURFACING VEIL: REDUCING PRINTOUT WITH A RESIN-RICH SURFACE Jon Jacobson Schmelzer Industries, Inc. ABSTRACT Printout on the surface of an FRP laminate has one primary source: resin
More informationReinforcements and Resin Systems
Webb Ins1tute Senior Elec1ve Spring, 2013 Eric Greene, Naval Architect EGAssoc@aol.com 410.263.1348 410.703.3025 (cell) hnp://ericgreeneassociates.com/webbins4tute.html Senior Elec4ve Spring 2013 page
More informationOUR AEROSPACE ADHESIVE RANGE
OUR AEROSPACE ADHESIVE RANGE Quin Global UK Unit 1, Ruthvenfield Avenue Inveralmond Industrial Estate Perth, PH1 3WB www.quinglobal.com www.tensorglobal.com sales.uk@quin-global.com 0845 381 22 33 Adhesives
More informationDINITROL 77 B. DINITROL 77B provides longterm. leaves a thick, light brown, waxy film. Due to its hard film, it also provides for mechanical
DINITROL 1000 DINITROL 1000 is a corrosion preventive fluid with excellent film building properties on open surfaces as well as in cavities. The product is mainly based on synthetic waxes and corrosion
More informationTechnical Discussion of the Unified Emission Factors for Open Molding of Composites
Technical Discussion of the Unified Emission Factors for Open Molding of Composites by Robert A. Haberlein, Ph.D., QEP TABLE OF CONTENTS 1.0 Introduction... page 1 2.0 Terms and Definitions... page 2 3.0
More informationGELCOAT APPLICATION BRUSH (H) SPRAY (S)
Product Application GELCOAT APPLICATION BRUSH (H) SPRAY (S) 2 THE GELCOAT, AS WELL AS THE MOULD AND THE WORKSHOP, SHOULD HAVE A TEMPERATURE OF 18 C to 45 o C AND MAXIMUM RELATIVE HUMIDITY OF 75% 3 BEFORE
More informationImproving the Cosmetic Quality and Finished Durability of Glass Fiber Reinforced Composites. ArmorGuard ARMORCOTE
Improving the Cosmetic Quality and Finished Durability of Glass Fiber Reinforced Composites ArmorGuard ARMORCOTE Cosmetic Quality Products with the best cosmetics are perceived to be higher quality are
More informationStep-By-Step Product Selection Guide
Step-By-Step Product Selection Guide Silicone Moldmaking Materials Europe and Asia Edition If you re looking for an easy-to-use moldmaking material that will deliver consistently superior results, look
More informationProduct Data Epoxy Resin Systems RS-L285. Hardeners RS-H285, RS-H286, RS-H287. Room temperature cure laminating system
Product Data Epoxy Resin Systems Room temperature cure laminating system RS-L285 Hardeners RS-H285, RS-H286, RS-H287 Applications Gliders and Light Aircraft Boats & Automotive Sports Equipment Other high
More informationAdhesive Films 350 F Cure
Adhesive Films 350 F Cure 69288 69186 69198 3M TM Scotch-Weld TM Structural Adhesive Film AF 191 Epoxy designed for bonding composites, metal-to-metal and metal-to-honeycomb components. High shear strength.
More informationTechnical Research. Evaluation of Thixotropic Vinyl Ester Resins According to ASTM C581 for Use in Corrosive Environments
Technical Research Evaluation of Thixotropic Vinyl Ester Resins According to ASTM C581 for Use in Corrosive Environments INTERPLASTIC CORPORATION Thermoset Resins Division 2 ABSTRACT Although thixotropic
More informationDocument Library TS Data Sheet
Document Library TS Data Sheet 46004 46005 46006 Rev:2 Effective: 01/11/2002 3M Marine Premium Filler Data Sheet Status: Active 3M Part No.(s) 46004 46005 46006 3M Part Descriptor(s) Pint Quart Gallon
More informationPERFORMANCE QUALITY RESINS
PERFORMANCE QUALITY RESINS PRODUCT SELECTOR GUIDE LET S TALK PERFORMANCE COMPOSITES ARE THE MATERIAL SYSTEMS OF PREFERENCE FOR MANY APPLICATIONS, BECAUSE OF THEIR FAVORABLE DURABILITY, STRENGTH, INHERENT
More informationImproved vinyl ester technology for anticorrosion and high performance laminates/grp structures. Stefanie Römhild Paris
Improved vinyl ester technology for anticorrosion and high performance laminates/grp structures Stefanie Römhild Paris 11.03.2014 DION IMPACT 9133 Premium bisphenol A epoxy based vinyl ester resin designed
More informationTHERMO-LITE LIGHTWEIGHT HEAVY DUTY ROT-FREE
THERMO-LITE LIGHTWEIGHT HEAVY DUTY ROT-FREE ENDLESS APPLICATIONS MARINE TRANSPORT CARAVAN/ MOTORHOME AMBULANCE LIMOUSINES TRAILERS HORSE FLOAT CAMPER TRAILER ESKY/ ICE BOX SANDWICH PANEL AVIATION CONSTRUCTION
More informationControl Techniques Guidelines for Fiberglass Boat Manufacturing DRAFT
Control Techniques Guidelines for Fiberglass Boat Manufacturing DRAFT July 3, 2008 This page intentionally left blank ii EPA XXX/R-XX-XXX Date Control Techniques Guidelines for Fiberglass Boat Manufacturing
More informationImpact Properties of Polyester Resins
COMPOSITES & POLYCON 7 American Composites Manufacturers Association October 17-19, 7 Tampa, FL USA Properties of Polyester Resins Abstract by Dr. Stephen Brooks, Reichhold Industries, Inc. Manufacturers
More informationEpoxide equivalent weight ASTM D 1652 g/eq C (77 F), Brookfield ASTM D 2196 cp or mpa.s 650
Starting Formulation EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Epoxy Resin System for Infusion and RTM EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Introduction EPON FlameX
More informationComposite Fuel Tank Construction
Composite Fuel Tank Construction *** FUEL COMPATIBILITY UPDATE (07/10/2000)*** It has now been over two and a half years since I immersed test coupons in three different fuels. They were immersed December
More informationFIBREGLASS REINFORCED POLYMER (FRP) SHEET PILING
PRODUCT BROCHURE ArmourWall FIBREGLASS REINFORCED POLYMER (FRP) SHEET PILING ArmourWall Sheet Piling Overview ArmourWall piles are an extremely durable, high performance product, making them an ideal choice
More informationCrystal Cast 1000A : Crystal Cast 1000B By Weight 100 : 120. Appearance - Clear liquid Clear liquid Clear liquid
Crystal Cast 1000 Two Part Casting System Water Clear, UV Stable Crystal Cast 1000 is a two component thermoset system which is water clear when cured. Crystal Cast 1000 is ideal for rapid prototyping,
More informationEngineering Branch Assets Delivery Group
F.1 SCOPE This Technical Specification shall apply to Fibre Reinforced Plastics or Glass Reinforced Plastics (hereinafter referred to as FRP or GRP) structures and the materials used in their manufacture,
More informationROCK-IT XC TECHNICAL DATA SHEET
ROCK-IT XC TECHNICAL DATA SHEET Check local VOC DESCRIPTION Rock-It XC is a high quality, urethane, textured coating that provides a durable, chemical and fade resistant, protective finish for truck beds,
More informationPredicting Composite Elastic Modulus with Polymer Castings Test Data
Author: Bruce Curry of AOC and J. Albert Rolston of Rolston & Associates Date: October, 2007 Technical Paper Predicting Composite Elastic Modulus with Polymer Castings Test Data Abstract Procedures and
More information