COMPANY LOCATION APPROVED PROCESS SPECIFICATION
|
|
|
- Stanley Hancock
- 6 years ago
- Views:
Transcription
1 COMPANY LOCATION APPROVED PROCESS SPECIFICATION LOCKHEED MARTIN ORLANDO, FL ALUMINUM CHEMICAL FILM CLASS 1A AMS/MIL-C-5541E ALUMINUM CHEMICAL FILM CLASS 3 AMS/MIL-C-5541E APPLICATION OF PRIMER AND TOPCOAT 79P BLACK OXIDE COATING FERROUS METALS CLASS 1 ALKALINE OXIDIZING/C & LOW ALLOY STL BLACK OXIDE COATING FERROUS METALS - CLASS 4 - ALKALINE OXIDIZING CHROMIC ACID - ALUMINUM ANODIZING TYPE 1, CLASS 1 CHROMIC ACID - ALUMINUM ANODIZING TYPE I, CLASS 2 CHROMIC ACID - ALUMINUM ANODIZING TYPE IB, CLASS 1 CHROMIC ACID - ALUMINUM ANODIZING TYPE IB, CLASS 2 CONVERSION COATING TITANIUM AMS 2486 ELECTRODEPOSITED COATINGS OF ZINC ON IRON AND STEEL ASTM B633 ELECTROLESS NICKEL PLATING CLASS 1 HARD COAT ALUMINUM AMS 2469 HARDCOAT - ALUMINUM ANODIZING TYPE III, CLASS 1 HARDCOAT - ALUMINUM ANODIZING TYPE III, CLASS 2 INSPECTION SYSTEM MIL-I NICKEL ELECTROPLATING CLASS 1 MIL-F PASS OF STAINLESS ST TYPE II PASS OF STAINLESS ST TYPE VI PASS OF STAINLESS ST TYPE VII PASS OF STAINLESS ST TYPE VIII ASTM A380 PENETRANT INSPECTION TYPE I, METHOD A, SENSITIVITY LEVEL 2 PENETRANT INSPECTION TYPE I, METHOD A, SENSITIVITY LEVEL 3 PENETRANT INSPECTION TYPE I, METHOD A, SENSITIVITY LEVEL 4
2 PENETRANT INSPECTION TYPE I,METHOD B, SENSITIVITY LEVEL 3 PENETRANT INSPECTION TYPE I,METHOD B,SENSITIVITY LEVEL 4 PENETRANT INSPECTION TYPE I/ASTM B545 TIN ELECTROPLATING SALT SPRAY TESTING SULFURIC ACID - ALUMINUM ANODIZING TYPE II, CLASS 1 SULFURIC ACID - ALUMINUM ANODIZING TYPE II, CLASS 2 TIN ALLOY ELECTROPLATING ASTM-B-117 AMS/MIL-P LOCKHEED MARTIN DENVER, CO ALUMINUM CHEMICAL FILM CLASS 1A MIL-C-5541E SUNNEYVALE, CA ALUMINUM CHEMICAL FILM CLASS 3 MIL-C-5541E ALUMINUM OXIDE, LUBE MIL-A BLACK FINISH, CHEMICAL MIL-F-495 BLACK OXIDE COATING BLACK OXIDE COATING BONDING WITH EPOXY PASTE ADHESIVE LAC-3326 BRUSH PLATE, ELECTRO MIL-STD-865 CADMIUM ELECTROPLATE TYPE III AMS QQ-P-416 CHROMIC ACID - ALUMINUM ANODIZING TYPE I, CLASS 1 /AMS 2470 CHROMIC ACID - ALUMINUM ANODIZING TYPE I, CLASS 1 /AMS 2470 CHROMIC ACID - ALUMINUM ANODIZING TYPE I, CLASS 2 /AMS 2470 CHROMIC ACID - ALUMINUM ANODIZING TYPE IB, CLASS 1 /AMS 2470 CHROMIC ACID - ALUMINUM ANODIZING TYPE IB, CLASS 2 / 2470 DYE PENETRANT, FLUORESCENT ELECTROLESS NICKEL PLATING CLASS 1 ELECTROLESS NICKEL PLATING CLASS 2 ELECTROLESS NICKEL PLATING CLASS 3 ELECTROLESS NICKEL PLATING CLASS 4 HARDCOAR - ALUMINUM ANODIZING TYPE III, CLASS 2 /AMS 2468 HARDCOAT - ALUMINUM ANODIZING TYPE III, CLASS 1 /AMS 2468 LIQUID PENETRANT INSPECTION TYPE I, METHOD A AMS-E-1417 LUBE, SOLID FILM, H/C TYPE I & II MIL-L LUBE, SOLIDFILM MIL-L-8937 ASTM E FLUORESCENT TYPE II - NON-FLUORESCENT TYPE I NICKEL ELECTROPLATING CLASS 1 MIL-I-6868
3 NICKEL ELECTROPLATING CLASS 2 NICKEL PLATE, LOW-STRESS DEPOSIT AMS 2424 NON DESTRUCIVE TESTING PERSONNEL QUALIFICATION & CERTIFICATION NAS-STD-410 NON-DESTRUCTIVE TESTING PERSONNEL QUALIFICATION & CERT. NAS-STD-410 MIL-F OF STAINLESS ST TYPE II AMS-QQ-P-35 /QQ-P-35 OF STAINLESS ST TYPE VII OF STAINLESS ST TYPE VIII OF STAINLESS ST TYPE VI PENETRANT INSPECTION - TYPE I, METHOD A, SENSITIVITY LEVEL 2 PENETRANT INSPECTION - TYPE I, METHOD A, SENSITIVITY LEVEL 3 PENETRANT INSPECTION - TYPE I, METHOD A, SENSITIVITY LEVEL 4 PENETRANT INSPECTION - TYPE I, METHOD B, SENSITIVITY LEVEL 2 2 PENETRANT INSPECTION - TYPE I, METHOD B, SENSITIVITY LEVEL 3 PENETRANT INSPECTION - TYPE I, METHOD B, SENSITIVITY LEVEL 4 PENETRANT INSPECTION TYPE I, METHOD A, SENSITIVITY LEVEL 2 PENETRANT INSPECTION TYPE I, METHOD A, SENSITIVITY LEVEL 4 PENETRANT INSPECTION TYPE I, METHOD B, SENSITIVITY LEVEL 3 PHOSPHATE COAT - TYPE M (MAGANESE) DOD-P PHOSPHATE COAT - TYPE Z (ZINC) DOD-P PYROMETRY AMS-2750 QUALIFICATION OF NDT PERSONNEL MIL-STD-410 SOLDER PLATING SULFURIC ACID - ALUMINUM ANODIZING TYPE II, CLASS 1 /AMS 2471/2 ASTM B545 LOCKHEED MARTIN ALL LOCATIONS ANODIZE TYPES I,II,IB,IIB,III CONTROL CHEMICAL FILM WS 9030 CHEMICAL FILM TYPE I MIL-C-5541 NICKEL PLATING AMS QQ-P-35 ASTM A380 QQ-P-35 ASTM A 967
4 PYROMETRY ZINC PLATING TYPE II AMS-2750 AMS-P / MIL-P ASTM B33 LOCKHEED MARTIN NEWTON ANODIZING HARDCOAT - ALUMINUM AMS-2472 BLACK OXIDE MIL-DTL BONDING WITH EPOXY PASTE ADHESIVE LAC-3326 CADMIUM PLATING AMS-QQ-P-416 CHEMICAL FILM MIL-DTL-5541 CHROMIC ACID - ALUMINUM ANODIZE AMS-2470 ASTM-B-488 MIL-DTL CHROMIC ACID - ANODIZING AMS-2470 COPPER PLATING AMS-2418 ELECTROLESS NICKEL COATING AMS-C ELECTROLESS NICKEL PLATING AMS-2404 HARD ANODIZE AMS-2468 HARD ANODIZE AMS-2468 LIQUID PENTRANT TESTING AMS-QQ-365 MIL-L-8937 MIL-PRF ASTM-E-1444 NICKEL PLATING AMS- NON - DESTRUCTIVE TESTING NAS-410 MIL-F MIL-F-7179 OF CORROSION RESISTANT STEEL AMS-2700 TREATMENT AMS-2700 TREATMENTS AMS-QQ-P-35 PHOSPHATE COATING DOP-P PRIMER COATINGS MIL-P SALT SPRAY TESTING SULFURIC ACID - ANODIZING SULFURIC ACID - ANODIZING ASTM-B-117 AMS-2471 AMS-2472
5 TIN - LEAD, PLATING TIN -LEAD, PLATING TIN -LEAD, PLATING TIN PLATE TIN PLATE MIL-P AMS--P LAC-3903
COMPANY LOCATION APPROVED PROCESS SPECIFICATION
COMPANY LOCATION APPROVED PROCESS SPECIFICATION UTC AEROSPACE SYST ALL LOCATIONS ALKILINE OXIDIZING MIL-DTL-13924 CL1 ALUMINUM CHEM FILM CP14.12 ALUMINUM CHEM FILM PS 114 ANODIC COATING MIL-A-8625 TY1
Beechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform
Brazing Note: Part Number-specific approval is required for Suppliers who do not hold Nadcap Welding/Brazing certification. Silver brazing requires Part Number-specific approval in all cases. Contact:
Material and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
Customer Approved Process Process Description
Alliant Tech Aircraft Braking Argo-Tech (Eaton) BAE Land MIL-STD-171 Various processes MIL-STD-865 Brush Plating TT-C-490 Lt Coat Zinc Phosphate Type I AMS 2471 DOD-P-16232 Phosphate (except Class 4),
ZYCI CNC Machining and 3D Printing AS9100 Rev D ISO ITAR Registered
CNC Machining and 3D Printing AS9100 Rev D ISO9001 2015 ITAR Registered 2030 Will Ross Court Chamblee, Georgia 30341 T: 404-334-7064 www.zyci.com quotes@zyci.com ANODIZE, CHROMIC...2 ANODIZE, HARD...3
Barry Avenue Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Barry Avenue Plating Inc 2210 Barry Ave 90064 United States This certificate demonstrates conformance and recognition
This is to certify that All Metals Processing of Orange County, LLC 8401 Standustrial Street Stanton, CA USA
This is to certify that 8401 Standustrial Street Stanton, CA 90680 USA is registered as a Single Site quality management system in conformance with ISO 9001:2008 and AS9100C The audit was conducted in
Table 3 : Quality Approved Special Processes By Special Process Code
Table 3 : Quality Approved Special Processes By Special Process Code Date Last Modified 1/15/2019 17-4 PH HT Precipitation-Hardening Stainless ASTM A693-16 14605SP ROCHESTER STEEL TREATING WORKS ROCHESTER,
Table 2 : Quality Approved Special Processes By Special Process Vendor
Page 1 of 8 SP 114337SP ACTON METAL PROCESSING CORP. WALTHAM, MA 781-893-5890 BLOX-ALL COATING OXIDE, BLACK, FERROUS METALS ALL CLASSES MIL-DTL-13924, 1-4 P-380 COATING Passivation of CRS ASTM A380 PS-1
Team Metal Finishing Inc.
Team Metal Finishing Inc. Available Processes: Anodizing Hard Coating Electroless Nickel Sulfamate Nickel Bright and Matte Nickel Silver Plating Gold Plating Tin Plating Chromate Conversion Coatings Immersion
Finish Specification
Finish Specification 100-337-00 Owner Joe Otto Approvals: Department Approved. Date Engineering Joe Otto 3/10/17 Manufacturing Chad Loughman 3/10/17 Quality Drew Ware 3/10/17 Material Control Brandon Bailey
MILITARY SPECIFICATIONS
ANODIZE TO AEROSPACE MATERIAL SPECIFICATIONS (AMS) AMS anodizing specifications are similar to MIL-A8625. The major differences are in the testing requirements. All AMS specs do not allow production parts
DEFENSE & CIVILIAN SPECIFICATIONS
DEFENSE & CIVILIAN SPECIFICATIONS* The following listing has been compiled from the latest available edition of the Department of Defense Index of Specifications and Standards (DODISS), which includes
Electroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
Agusta Passivation STA Passivation Shot Peen STA Shot Peening of Steel, Aluminum and Titanium Parts STA
Airbus Acid Etch Inspection ABP 6-5225 Testing of Steels After Machining by Etch Inspection Blasting ABP1-2344 Cleaning and Surface Improvement by Blasting Passivation ABP1-5062 Passivation of Steels and
Electroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
Table 3 : Quality Approved Special Processes By Special Process Code
Table 3 : Quality Approved Special Processes By Special Process Code Date Last Modified 11/9/2018 A-2488 ANODIC - TITANIUM & T SAE AMS 2488D 92649SP TIODIZE TECHNOLOGIES HUNINGTON BEACH, CA 714-902-0510
Har-Conn Chrome Co. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Har-Conn Chrome Co 603 New Park Ave 06110 United States This certificate demonstrates conformance and recognition
Table 2 : Quality Approved Special Processes By Special Process Vendor
Page 1 of 8 SP 1121SP ACCURATE METAL FINISHING Randolph, MA 781-963-7300 A380 COATING CLEANING, DESCALING, & PASSIVATION of S/S ASTM A380/A380M CC3 COATING CONVERSION COATING, TYPE I, CLASS-3 MIL-DTL-5541
Table 2 : Quality Approved Special Processes By Special Process Vendor
Page 1 of 8 SP 1121SP ACCURATE METAL FINISHING Randolph, MA 781-963-7300 A380 COATING CLEANING, DESCALING, & PASSIVATION of S/S ASTM A380/A380M PS COATING PASSIVATION, CRS ASTM A967 SA2 COATING ANODIC
Aircraft Approvals. Vendor Code or Approval Number ALCOR ENGINE COMPANY Special Process FAA-PMA Products 2001 NA BAE SYSTEMS Copper AMS NA
Operation Specification Approval Date Vendor Code or Approval Number ALCOR ENGINE COMPANY Special Process FAA-PMA Products 2001 NA BAE SYSTEMS AMS 2418 2012 NA Zinc Phophate Chemical Film MIL-DTL-13924
SUB-CONTRACT SPECIFICATION REVISION LEVEL - BOEING WEB DOCUMENT SPEC # REVISION TITLE
SUB-CONTRACT SPECIFICATION REVISION LEVEL - BOEING BAC 5018 K Installation of Safetying Devices BAC 5423 W Penetrant Methods of Inspection BAC 5424 U Magnetic Particle Inspection BAC 5730 R Shot Peening
DETAIL SPECIFICATION SHEET FITTINGS, HYDRAULIC TUBE, SLEEVE, DOUBLE ANGLE
INCH-POUND MIL-DTL-32371/10 24 April 2012 DETAIL SPECIFICATION SHEET FITTINGS, HYDRAULIC TUBE, SLEEVE, DOUBLE ANGLE This specification is approved for use by all Departments and Agencies of the Department
Procurement Quality Clauses and Specifications
Procurement Quality Clauses and Specifications This document describes the Quality Clauses and Specifications applicable to Lynch Purchase Orders for materials and outsourced processes. The specific items
DETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
INCH-POUND MS51524C 15 November 2017 SUPERSEDING MS51524B 17 March 2016 DETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED Reactivated after 15 November 2017 and may be
VOUGHT AIRCRAFT INDUSTRIES, INC. ASPL PROCESS CODES SORTED by SPECIFICATION
PROCESS S SORTED by 208-13-186 HFAL HOT FORMING - ALUMINUM NMSE 208-13-239 SF FORMING - SHOT PEEN NMSE 208-13-40 SP SHOT PEENING NDT 208-14-11 FPI FLUORESCENT PENETRANT INSPECTION TESTING NDT 208-14-13
VOUGHT AIRCRAFT INDUSTRIES, INC. ASPL SPECIFICATIONS SORTED by PROCESS CODE
SPECIFICATIONS SORTED by PROCESS Nadcap NMSE NDT NDT NDT NDT SPECIFICATION STP51-402 STP51-406 STP51-501 STP53-001 STP53-201 STP53-301 STP53-701 STP53-903 VAII ASPL PROCESS 51402 CHEMICAL MILLING OF ALUMINUM
Electroless nickel has been shown to replace some hard chrome applications with less machining after plating with similar hardness after baking.
Replacements Electroless nickel has been shown to replace some hard chrome applications with less machining after plating with similar hardness after baking. Some other type deposits have also proven successful
Magnetic Inspection Laboratory Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Magnetic Inspection Laboratory Inc. 1401 Greenleaf Avenue Elk Grove Village, IL 60007-5522 United States This
EWI-FC-1000 REV AM EAST/WEST FINISH CODES
EWI-FC-1000 REV AM FEBRUARY 12, 2018 EAST/WEST FINISH CODES CORINNE INCHIERCHIRO 02/12/2018 PREPARED BY DATE JEFF WALSH 2/27/2018 PROJECT ENGINEER DATE M. VETTER 03/07/2018 ENGINEERING MANAGER DATE TABLE
FIGURE 1. INSERT, SCREW THREAD.
INCH-POUND 5 May 2015 SUPERSEDING MIL-I-45932/3B 2 May 1994 DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD THIN WALL, LOCKED IN, OVERSIZE REPLACER This specification is approved for use by all Departments
Fabrication & Services
Anodic Cleaning Anodic cleaning also known as electro cleaning is the pretreatment process used before any type of plating. This method of cleaning utilizes a DC current which creates a foaming action
DETAIL SPECIFICATION SHEET FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
INCH-POUND MS51532C 5 March 2018 SUPERSEDING MS51532B 16 February 1988 DETAIL SPECIFICATION SHEET FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED This specification
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES III AND IV, METRIC
METRIC MIL-DTL-38999/28H 27 February 2018 SUPERSEDING MIL-DTL-38999/28H 12 May 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES III AND IV, METRIC
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE IV, DOUBLE SPAN, T-DIP
INCH-POUND 4 November 2015 SUPERSEDEDING MIL-C-28754/68(NAVY) 29 April 1985 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE IV, DOUBLE SPAN, T-DIP This specification is
Beryllium-Copper Gaskets
STOCK SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE beryllium-copper gaskets combine high levels of EMI shielding effectiveness with springfinger wiping and low
NDCEE. Cadmium and Hexavalent Chromium Free Electrical Connectors: A Synergistic Approach. National Defense Center for Energy and Environment
NDCEE Cadmium and Hexavalent Chromium Free Electrical Connectors: A Synergistic Approach Robert B. Mason NDCEE, Johnstown, PA and Largo, FL DoD Executive Agent Office of the Assistant Secretary of the
Charting the Way Forward to Cadmium and Hexavalent Chromium Free Connectors: NAVSEA Usage and Testing
Charting the Way Forward to Cadmium and Hexavalent Chromium Free Connectors: NAVSEA Usage and Testing ASETSDefense 2012: Workshop on Sustainable Surface Engineering for Aerospace and Defense 27 August
Chromate-free inhibitor and non-chrome fuel tank coatings
Chromate-free inhibitor and non-chrome fuel tank coatings Dr. Jeannine E. Elliott Dr. Ron Cook 2009 ASETS Defense Sept 2, 2009 Research Research Inc. Inc. Wheat Wheat Ridge, Ridge, CO CO 80033 80033 www.tda.com
Coating Thickness Meter Data Sheet / Instructions
Paint Test Equipment Coating Thickness Meter Data Sheet / Instructions Information The Paint Test Equipment Coating Thickness Meter easily measures all coatings on metallic substrates using the magnetic
HAND BOOK OF ELECTROPLATING ANODIZING & SURFACE FINISHING TECHNOLOGY
HAND BOOK OF ELECTROPLATING ANODIZING & SURFACE FINISHING TECHNOLOGY Principles of Electroplating The Electro Chemical Series Electrodeposition Electrochemical Terms Using a Copper Anode Using an Inert
FIGURE 1. INSERT, SCREW THREAD.
INCH-POUND 22 February 2016 SUPERSEDING 5 May 2015 DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD THIN WALL, LOCKED IN, OVERSIZE REPLACER This specification is approved for use by all Departments and
The Leader in Oilfield Coating Technology ISO 9001:2008.
The Leader in Oilfield Coating Technology ISO 9001:2008 www.ssplating.com Who We Are S&S Plating/Coating Dynamics is the leading provider of electro plated coatings to the oilfield, power generation and
"We Finish What Others Won t Even Start"
"We Finish What Others Won t Even Start" (818) 954-9504 sales@technicalmetalfinishing.com www.technicalmetalfinishing.com We Finish What Others Won t Even Start At Technical Metal Finishing, our strength
PROCESS SPECIFICATION DEPARTURES
SPEC# BAC5000 AN 6-277, 6-295, 6-297 (OPTIONAL), 6-296, 6-278 (OPTIONAL), 6-279 (OPTIONAL), 6-280 (OPTIONAL) 6-281, 6-282 (OPTIONAL), 6-283 (OPTIONAL), 6-284 (OPTIONAL), 6-285 (OPTIONAL), 6-286 (OPTIONAL),
.050" 4 thru 25 Contacts
.050" 4 thru 25 Contacts MM-11... MM-12... MM-12, MK-16, MK-18 receptacles MM-11, MK-15, MK-17 plugs PAGE 1 OF 4 PAGES BODY CONTACTS OPTIONS SERIES SIZE HARDWARE MM.050" Rugged Metal I/O Connector (MM
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 27831-2 First edition 2008-10-15 Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 2: Non-ferrous metals and alloys Revêtements métalliques
Magnesium-Rich Coatings
Magnesium-Rich Coatings Dr. Kevin Kovaleski NAVAIR Materials Engineering Division Patuxent River, MD ASETS Denver, CO 1-3 September, 2009 NAVAIR Public Release 09-772 Distribution: Statement A - "Approved
ISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006
Coastline Metal Finishing is AS9100D Certified and NADCAP Accredited. ISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006 Nadcap Accredited AS7108 for Chemical Processing Thank
DEPARTMENT OF DEFENSE STANDARD PRACTICE
METRIC MIL-STD-871C (USAF) 30 June 2015 SUPERSEDING MIL-STD-871B 01 March 2007 DEPARTMENT OF DEFENSE STANDARD PRACTICE ELECTRO-CHEMICAL STRIPPING OF INORGANIC FINISHES Reactivated 30 June 2015 and may
DETAIL SPECIFICATION SHEET
INCH-POUND 4 May 2018 SUPERSEDING 6 March 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, SCREW-LOCK ASSEMBLY, MALE
INCH-POUND MIL-DTL-2308/25K 9 April 2013 SUPERSEDING MIL-DTL-2308/25K w/amendment 1 18 July 2011 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL,
Boeing Specifications
Page 1 of 6 = updated = Performed by GKN BAC 5000 AH General Sealing PSD 6-211, 6-220, 6-222, 6-224, 6-225, 6-227, 6-228 BAC 5004 L Installation of Permanent Fasteners PSD 6-121, 6-122, 6-125 BAC 5004-1
For the F/A 18CDEF Programs. 74A J Serialization and Traceability for F/A-18 FC Parts
= Performed by GKN 74A900003 J Serialization and Traceability for F/A-18 FC Parts 74A900004 M Control of Fracture & Maintenance Crit. Parts for F/A-18 74A900053 J Serialization and Traceability Requirements
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83513/33B 13 June 2013 SUPERSEDING MIL-DTL-83513/33B 29 October 2008 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT,
For the F/A 18CDEF Programs. 74A J Serialization and Traceability for F/A-18 FC Parts
= Performed by GKN 74A900003 J Serialization and Traceability for F/A-18 FC Parts 74A900004 M Control of Fracture & Maintenance Crit. Parts for F/A-18 74A900053 J Serialization and Traceability Requirements
99X Specification Revisions
99X2000-( ) Lubricant D 99X2000-01 Lubricant D 99X2000-02 Lubricant D 99X2000-03 Lubricant D 99X2000-04 Lubricant D 99X2000-05 Lubricant D 99X2000-06 Lubricant D 99X2000-07 Lubricant D 99X2001 99X2001-01
METAL FINISHING. (As per revised VTU syllabus: )
METAL FINISHING (As per revised VTU syllabus: 2015-16) Definition: It is a process in which a specimen metal (article) is coated with another metal or a polymer in order to modify the surface properties
Prevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
RECOMMENDED APPLICATION PROCEDURE FOR SOLID FILM LUBRICANTS & COATINGS
Process Bulletin 3000-A s & Engineered Coatings Everlube Products Surface Technologies Division of Curtiss-Wright 100 Cooper Circle I Peachtree City, GA 30269 T: 770.261.4800 I F: 770.261.4805 I 800-428-7802
DEPARTMENT OF DEFENSE MANUFACTURING PROCESS STANDARD FINISHING OF METAL AND WOOD SURFACES
NOT MEASUREMENT SENSITIVE MIL-STD-171F 31 May 2011 SUPERSEDING MIL-STD-171E w/change 1 19 November 2001 DEPARTMENT OF DEFENSE MANUFACTURING PROCESS STANDARD FINISHING OF METAL AND WOOD SURFACES AMSC N/A
DOCUMENT E-275 AUTHORIZED ALTERNATIVE SPECIFICATIONS
2525 Curtiss Street Downers Grove, IL 60515 (630) 969-0620 Cage Code 93455 REVISIONS REV DESCRIPTION DATE APPROVAL See ECO-160968 9/13/16 Joyce Davis DOCUMENT E-275 AUTHORIZED ALTERNATIVE SPECIFICATIONS
METHODS OF COATING FABRICATION
METHODS OF COATING FABRICATION Zbigniew Grzesik http://home.agh.edu.pl/~grzesik Department of Physical Chemistry and Modelling DEFINITION The coating is the thin outer layer of the object, which physiochemical
Room Temperature Metal Blackening & Antiquing Processes. Hot & Mid Temp Oxide Finishes Metal Cleaning & Surface Preps
Specialty Chemical Manufacturer for the Plating and Metal Finishing Industries Where Finishing Excellence Begins Plating Processes Room Temperature Metal Blackening & Antiquing Processes Hot & Mid Temp
PROCESS SPECIFICATION- SURFACE FINISH
1.0 SCOPE This specification establishes the priming, painting and topcoat color requirements for components in accordance with the customer contract specifications. This procedure shall be used for aluminum
DETAIL SPECIFICATION SHEET ELBOW - PIPE TO HOSE, 45
INCH-POUND AN844 Rev 13 3 October 2013 SUPERSEDING AN844 Rev 12 7 June 2011 DETAIL SPECIFICATION SHEET ELBOW - PIPE TO HOSE, 45 Reinstated after 7 June 2011. Inactive for new design after 7 June 2011.
SURFACE VEHICLE INFORMATION REPORT
400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE INFORMATION REPORT Submitted for recognition as an American National Standard J474 Issued 1930-01 Reaffirmed 1985-02 Superseding J474 JUN72
TECHNICAL INFORMATION MEMORANDUM
UNCLASSIFIED NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION PATUXENT RIVER, MARYLAND TECHNICAL INFORMATION MEMORANDUM REPORT NO: NAWCADPAX/TIM-2018/20 WATER-REDUCIBLE EPOXY PRIMERS WITH IMPROVED BARRIER PROPERTIES
SUPERSEDING MIL-STD-193K 1 December 1986 MILITARY STANDARD
NOT MEASUREMENT SENSITIVE MIL-STD-193L 27 August 1991 SUPERSEDING MIL-STD-193K 1 December 1986 MILITARY STANDARD PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING
FEDERAL SPECIFICATION SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD
FEDERAL SPECIFICATION INCH-POUND FF-S-92C w/amendment 1 5 May 2015 SUPERSEDING FF-S-92C 28 October 2014 SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD The General Services Administration has authorized
DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
INCH-POUND AN924 Rev 14 15 February 2018 SUPERSEDING AN924 Rev 13 14 April 20104 DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING Reinstated after 14 June 2012. Inactive for new design.
RITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
DOCUMENT E-275 AUTHORIZED ALTERNATIVE SPECIFICATIONS
2525 Curtiss Street Downers Grove, IL 60515 (630) 969-0620 Cage Code 93455 REVISIONS REV DESCRIPTION DATE APPROVAL AF See ECO-160968 9/13/16 Joyce Davis See ECO-161299 1/5/2017 Joyce Davis DOCUMENT E-275
SILVER LINE BUILDING PRODUCTS. Series 1700 Heavy Commercial Aluminum Double Hung. HC65 48 x84 / HC50 60 x96 Replacement Window
DIVISION 08 / SECTION 08505 METAL WINDOWS SILVER LINE BUILDING PRODUCTS SPECIFICATIONS: GENERAL Series 1700 Heavy Commercial Aluminum Double Hung 1. SECTION INCLUDES 2. RELATED SECTIONS 3. QUALITY ASSURANCE
Diamond Chrome Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Diamond Chrome Plating Inc 604 S. Michigan Ave Howell, MI 48844 United States This certificate demonstrates
DETAIL SPECIFICATION SHEET POWER DIVIDERS, N-WAY, 0 DEGREES, FLAT PACK
INCH-POUND MIL-DTL-23971/5D 23 April 2013 SUPERSEDING MIL-DTL-23971/5C 14 May 2007 DETAIL SPECIFICATION SHEET POWER DIVIDERS, N-WAY, 0 DEGREES, FLAT PACK This specification is approved for use by all Departments
JCAT Alternative Coatings for Fasteners on USMC- Expeditionary Fighting Vehicle
JCAT Alternative Coatings for Fasteners on USMC- Expeditionary Fighting Vehicle January 26, 2006 Hilton San Diego Resort 1775 East Mission Bay Drive San Diego, CA 92109 Report Documentation Page Form Approved
SPEC Boeing REV Notes
BAC 5000 General Sealing AN Psd 6 214, 6 236, 6 239, 6 242, 6 254, 6 256, 6 260, 6 261, 6 262, 6 263, 6 265, 6 266, 8 17, 8 18, 8 20,9 43, 9 44, 9 45, 9 46, 9 53,6 270,6 271,6 269,6 267, 9 24, 9 39, 9
ASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
1 B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum 2 B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated
Legend: Doc. # Document Title OEM Solid Film Lubrication Triumph Vought. Fluid Resistant, Epoxy-Polyamide Exterior Primer
Approvals and Capabilities Listing HTL-0009 Rev P 6.20.18 All approvals are subject to change and may not be for all materials. Some of these processes may have limitations for specific processing information.
ISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006
Coastline Metal Finishing is AS9100D Certified and NADCAP Accredited. ISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006 Nadcap Accredited AS7108 for Chemical Processing Thank
PS901000E TEMPORARY PROTECTION ON MACHINED PARTS AND PRODUCTION MATERIAL
SECURITY CLASS : UNCLASSIFIED COMMRCL. CLASS : UNCLASSIFIED DOCUMENT IDENTIFIER SUBJECT: PARTS AND PRODUCTION MATERIAL MATERIAL ENGINEERING & TECHNOLOGY DEVELOPMENT ENGINEERING DIVISION / COMMERCIAL AIRCRAFT
Astm And Sae Ams Standards And Specifications For
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with astm and sae ams standards
ISO INTERNATIONAL STANDARD. Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron
INTERNATIONAL STANDARD ISO 15726 First edition 2009-02-01 Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron Revêtements métalliques et autres revêtements inorganiques
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
Lecture 16: Surface Processing
MSE 440/540: Processing of Metallic Materials Instructors: Yuntian Zhu Office: 308 RBII Ph: 513-0559 ytzhu@ncsu.edu Lecture 16: Surface Processing Department of Materials Science and Engineering 1 Surface
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL SERIES 1 AND 2, BAYONET COUPLING
INCH-POUND 30 August 2013 SUPERSEDING 25 July 2012 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING Reactivated
ISO INTERNATIONAL STANDARD. Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 1: Ferrous metals and alloys
INTERNATIONAL STANDARD ISO 27831-1 First edition 2008-10-15 Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 1: Ferrous metals and alloys Revêtements métalliques et
ISO INTERNATIONAL STANDARD. Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 1: Ferrous metals and alloys
INTERNATIONAL STANDARD ISO 27831-1 First edition 2008-10-15 Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 1: Ferrous metals and alloys Revêtements métalliques et
Institute of Materials Finishing. Introduction to the Surface Finishing Foundation Certificate
Introduction to the Surface Finishing Foundation Certificate The course/module for the Foundation Certificate is designed to provide personnel in surface finishing and related technologies the opportunity
Zinc-Nickel Electroplating &
Cadmium Alternatives: es Zinc-Nickel Electroplating & Repair of Aluminum Coatings Presented at: SERDP/ESTCP Workshop February 27, 2008 Presented By: Stephen Gaydos Technical Fellow M&P Boeing St. Louis
Direct Copper Metalization of Aluminum: Elimination of Zincate
June 2018 Direct Copper Metalization of uminum: Elimination of Zincate Richard DePoto, Business Development Doug Duda, Laboratory Manager Uyemura International Corporation Southington CT rdepoto@uyemura.com
Trivalent Black Layers With Cathodic Corrosion Protection
Trivalent Black Layers With Cathodic Corrosion Protection Rolf Jansen, Sigrid Volk, Patricia Preikschat, SurTec GmbH, D-64673 Zwingenberg Subjects Why coating? Why black? cathodic corrosion protection
EVALUATION OF PROTECTION SCHEMES FOR ULTRAHIGH-STRENGTH STEEL ALLOYS FOR LANDING GEAR APPLICATIONS
EVALUATION OF PROTECTION SCHEMES FOR ULTRAHIGH-STRENGTH STEEL ALLOYS FOR LANDING GEAR APPLICATIONS C. Kern, K. Sassaman, and C. Kuehmann QuesTek Innovations LLC 1820 Ridge Avenue Evanston, IL 60201 D.
MATERIAL DECLARATION SHEET
Number 3500S-1-103L Product Line Precision Pot Compliance Date RoHS Compliant Yes MSL N/A No. Construction Element (subpart) 1 Mandrel Wire Homogeneous weight [g] 2 Resist Wire Metal 3.1520 3 Epoxy Epoxy
Progress on LHE Zinc-Nickel and Other Cadmium Alternatives
Progress on LHE Zinc-Nickel and Other Cadmium Alternatives Steve Gaydos Boeing St. Louis, MO Craig Pessetto ES3 Clearfield, UT Jay Randolph ES3 Warner Robins, GA ASETSDefense 2009 Sustainable Surface Engineering
Institute of Materials Finishing PREFACE TO THE 2010 EDITION 3 INTRODUCTION TO DISTANCE LEARNING 4 MODULE OBJECTIVES 7
CONTENTS Page PREFACE TO THE 2010 EDITION 3 INTRODUCTION TO DISTANCE LEARNING 4 MODULE OBJECTIVES 7 SECTION A INTRODUCTION TO SURFACE FINISHING Lesson 1 Surface Finishing Technologies SECTION B BASIC SCIENCE
Volumetrie Analysis o( Metal Finishing Solutions
Volumetrie Analysis o( Metal Finishing Solutions AUTHOR: Andrew K. McFadyen B.Sc, C.Chem., FRSC To My Wife..^tSNV ASM INTERNATIONAL Materials Park, Ohio, U.S.A. FINISHING PUBLICATIONS LTD, Stevenage, Hertfordshire,
TECH SHEET PEM - REF / CHOOSING A FASTENER FINISH. SUBJECT: Metal fasteners in contact with metal panels
PEM - REF / CHOOSING A FASTENER FINISH SUBJECT: Metal fasteners in contact with metal panels Introduction All PennEngineering catalog bulletins list a standard finish and some also list optional finishes.
Metal Finishing Products and Service META-MATE ZINCATE 40 "A CONCENTRATED LIQUID ZINCATE FORMULATION FOR THE PRETREATMENT OF ALUMINUM AND ITS ALLOYS"
Metal Chem,inc. Metal Finishing Products and Service 29 Freedom Court Greer, SC 29650 864.877.6175 Fax 864.877.6176 DATA SHEET META-MATE ZINCATE 40 "A CONCENTRATED LIQUID ZINCATE FORMULATION FOR THE PRETREATMENT