Aircraft Approvals. Vendor Code or Approval Number ALCOR ENGINE COMPANY Special Process FAA-PMA Products 2001 NA BAE SYSTEMS Copper AMS NA
|
|
- Samson Dixon
- 6 years ago
- Views:
Transcription
1 Operation Specification Approval Date Vendor Code or Approval Number ALCOR ENGINE COMPANY Special Process FAA-PMA Products 2001 NA BAE SYSTEMS AMS NA Zinc Phophate Chemical Film MIL-DTL AMS-QQ-P-416 TT-C-490 MIL-C-5541 BEAVER AEROSPACE & DEFENSE INC. Quality Systems MIL-I NA BELL HELICOPTER Classified Parts QPS BPS 4084 BPS 4006 BPS 4110 Epoxy BPS 4457 Phosphatize BPS 4384 Silver BPS 4529 Chem. Film CL-1A BPS 4182 Chem. Film CL-3 BPS 4182 Passivation, Procedure#1 BPS 4007 NOTE: PARTS MANUFACTURED TO BOEING SPECIFICATIONS MUST ALSO BE APPROVED BY BOEING BOEING AIRCRAFT AMS 2418 BAC 5722 QQ-P-416 BAC 5701 Salt Spray ASTM B117 CURTIS WRIGHT Plate CPS NA Plate QQ-P-416 Plate CPS 6616 Strip CPS 6007 Plate CPS 6005 Silver Plate CPS 6604 Passivation Chem. Film QQ-P-35 MIL-C-5541 Salt Spray ASTM B 117 Boeing Aircraft Approvals DI-4426
2 Plating AMS Plating AMS 2401 Plating Plating Plating AMS-QQ-P-416 AMS-QQ-P-416 AMS 2481 AMS 2485 DOD-P MIL-C MIL-C-5541 MIL-DTL-5541 TT-C-490 Plating AMS 2418 Plating Plating Electroless Plating Nickel AMS 2404 Electroless Plating Nickel AMS 2405 Electroless Plating Nickel Electroless Plating Nickel MIL-C Nickel Plating AMS 2403 Nickel Plating AMS 2423 Nickel Plating Nickel Plating Nickel Plating AMS-QQ-N-290 QQ-P-290 AMS 2410 AMS 2411 AMS 2412 Stripping QQ-S-365 Surface Treatment/Passivation ASTM A 380 Surface Treatment/Passivation ASTM A 967 Surface Treatment/Passivation Surface Treatment/Passivation Surface Treatment/Passivation B10 Adhesion Tape Testing B12 Adhesion Bend Testing (Metallic Coatings) B13 Coating Weight Testing Machines B20 Porosity B5 Corrosion/Salt Spray Testing B6 Water Immersion/High Humidity Testing Solution Analysis QQ-P-35 Eaton AMS-QQ-P-35
3 (Bright/LHE) GOODRICH LANDING GEAR AMS-QQ-P NA (Bright/LHE) LGPS 1100 (Bright/LHE) AMS 2400 Nickel-Electroless AMS 2404 Sulfamate Nickel AMS 2424 Passivation AMS 2700 Passivation ASTM A-967 Dry Film MIL-PRF Paint MIL-PRF Chemical Film MIL-DTL-5541 AMS 2418 Sulfamate Nickel AMS 2403 MIL-DTL MMC-254 GE AIRCRAFT ENGINES AMS T5716 Sulfamate Nickel AMS 2403 Nickel AMS 2423 Sulfamate Nickel AMS 2424 Nickel QQ-N-290 HAMILTON SUNSTRAND MIL-C PN/CP PN/CP AMS 2485 Dowty PS 132 QQ-P-416 AMS 2400 P12& P63 P66 & P67 PN/CP Dowty PS-1,2,3,4,5,7 PN/CP P-101 AMS 2418 Dowty PS 106 Nickel- Diffused AMS 2416 Nickel-Electroless MIL-C Nickel PN/CP &03 Nickel AMS 2404 Nickel AMS 2405
4 Nickel P195 HS 248 PN/CP CP P-277 & CCT LB 619 MIL-L MS thru 06 SANDSTROM 9A MIL-L MIL-L MIL-L MIL-L Dry Film Leaded Bronze PN/CP Phosphate-Manganese DOD-P Phosphate-Manganese PN/CP Phosphate-Manganese P76 Phosphate-Manganese AMS 2481 Phosphate-Manganese Dowty PS 108 Phosphate-Zinc DOD-P Phosphate-Zinc MIL-P Phosphate-Zinc PN/CP Phosphate-Zinc TT-C-490 Phosphate-Zinc Type I Phosphate-Zinc Dowty PS 108 Silver QQ-S-365 Silver AMS 2410 Silver AMS 2411 Silver AMS 2412 Silver PN/CP Silver P224 & P225 Silver Dowty DTD 939 Silver Dowty Def. Std 03-9 Nickel-Electroless Dowty Def. Std 03-5 Nickel-Electroless Dowty PS 129 Passivation QQ-P-35 Passivation PN/CP Passivation MIL-S-5002 Passivation P-44 Passivation ASTM A380 Passivation Dowty PS 124 Phosphate-Manganese MIL-P Zinc QQ-Z-325 Zinc AMS 2402 Zinc MIL-Z-17871
5 Zinc Zinc Dowty Def. Std ASTM B633 HEROUX - DEVTEK (Low Embrittlement) HPS 135 (Limitations-Al- Ni-Br(bronze)hardware) 2006 PPI01U HISPANO SUIZA DMP A 2004 NA Plating Phosphate Treatment DMP A DMP A DMP DMP B BLRF C BLRE A HONEYWELL ENGINES Passivation AMS-QQ-P AMS 2418 Plating AMS-QQ-P-416 Type II, 40 HRC & Above Silver AMS 2410 Silver AMS 2412 EMS52402 Dry Film Lub. Electroless Nickel AMS-C Class 1 HR TEXTRON HP P0253 Phosphate Pre Treatments Plate NI Plate Passivate Typs II, VI, VII, VIII Plate NI Plate Phosphate Manganese/Zinc Plate NI Plate Silver Plate Solid Film Lube NI-Thallium-Boron or Electroless HP46 KAMAN AEROSPACE AMS HP10 HP15 HP18 HP31 HP42 HP48 HP09 HP11 HP16 HP23 HP33 QQ-P-416 Type 1,2,3 Nickel-Electroless AMS 2404 Nickel QQ-N-290 LOCKHEED MARTIN GROUND SYSTEMS Chemical Film MIL-C PK1U00
6 Paint (CARC) MIL-C Prime & Paint (CARC) MIL-F Passivation ASTM A 967 Coating, Permanent Resin MD HELICOPTER MDP Paint System, Application of MDP4-107 Supplier Quality Requirements MDQS 2000 MESSIER - DOWTY Paint Instructions DCMP SC 253 Plating PCS 2100 AMS-QQ-P-416 Paint Instructions Hawker 4000 Program DCMP 214 Trichloroethylene Vapor-Degreasing Engine Cleaning PRATT & WHITNEY SPOP NA Nickel SPOP 26 Sulfamate Nickel AMS 2403 Silver AMS 2410 Silver AMS 2411 Silver AMS 2412 Chemical Film RAYTHEON MIL-C NA Paint MIL-P Paint MIL-PRF Paint MIL-P Abrasive Blasting ROLLS ROYCE DEUTSCHLAND RPS /02 Plating RPS 170 Chromating of Magnesium Alloys RPS 22 Cleaning and Degreasing RPS 128 Plating RPS 297 Corrosion Protection RPS 367 Etching of Hardened Steel Components RPS 147 Lab. Control of Furnaces RPS 953 Nickel Plating RPS 237 Organic Barrier Coatings RPS 661 Phosphate Treatment RPS 6 RPS 168 Ultra Sonic Cleaning RPS 498 Visual Inspection RPS 709 White Layer Removal RPS 278 ROLLS ROYCE UK Lab. Control of Furnaces RPS Nickel Plating RPS 237 Organic Barrier Coatings RPS 661
7 Phosphate Treatment RPS 6 RPS 168 Ultra Sonic Cleaning RPS 498 Visual Inspection RPS 709 White Layer Removal RPS 278 Abrasive Blasting RPS 386 Plating RPS 170 Chromating of Magnesium Alloys RPS 22 Cleaning and Degreasing RPS 128 Plating RPS 297 Corrosion Protection RPS 367 Etching of Hardened Steel Components RPS 147 ROLLS ROYCE INDIANAPOLIS AMS-Mil-A NI Plate AMS 2403 E-NI AMS 2404 Hard NI AMS 2423 Chem. Film AMS 2473 Classified Parts EDS 1306 White Layer EIS 1500 Corrosion Coating EPS Electropolishing EPS LHP 6206 Silver/NI Strike AMS 2410 Silver High Temp AMS 2411 Silver/Cu Strike AMS 2412 AMS 2418 NI Plate AMS 2424 Anodic AMS 2471 Chem. Treatment AMS 2474 LHV 9502 Corrosion Coating EPS Acid Pickling EPS LHP 6016 LHP 8041 SAFRAN DMP NA Silver Silver DMP DMP A DMP A BLRF BLRE B BLRE A BLRJ C SCHWEIZER AIRCRAFT
8 Stress Relieve SHP NA Plating SHP 4-11 SHP 4-50 Electroless Nickel SHP 4-10 Plate SHP Abrasive Cleaning-Metallic & Nonmetallic SHP 9-1 Chemical Cleaning Metallic SHP 9-5 SIKORSKY AIRCRAFT AMS SS8409 WILLIAMS INTERNATIONAL E-NI AMS E-NI AMS 2405 AMS 2412 Plating AMS 2418 NI Plating AMS 2423 NI-CD Dif Plating P3010 P3021 NI Plating AMS 2424 Shot Peening AMS 2430 AMS 2485 White Layer Removal P Acid Removal White Later P NI Plating P3019 Passivation, Heat Res P3610
Material and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationCOMPANY LOCATION APPROVED PROCESS SPECIFICATION
COMPANY LOCATION APPROVED PROCESS SPECIFICATION LOCKHEED MARTIN ORLANDO, FL ALUMINUM CHEMICAL FILM CLASS 1A AMS/MIL-C-5541E ALUMINUM CHEMICAL FILM CLASS 3 AMS/MIL-C-5541E APPLICATION OF PRIMER AND TOPCOAT
More informationBeechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform
Brazing Note: Part Number-specific approval is required for Suppliers who do not hold Nadcap Welding/Brazing certification. Silver brazing requires Part Number-specific approval in all cases. Contact:
More informationSUB-CONTRACT SPECIFICATION REVISION LEVEL - BOEING WEB DOCUMENT SPEC # REVISION TITLE
SUB-CONTRACT SPECIFICATION REVISION LEVEL - BOEING BAC 5018 K Installation of Safetying Devices BAC 5423 W Penetrant Methods of Inspection BAC 5424 U Magnetic Particle Inspection BAC 5730 R Shot Peening
More informationISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006
Coastline Metal Finishing is AS9100D Certified and NADCAP Accredited. ISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006 Nadcap Accredited AS7108 for Chemical Processing Thank
More informationDEFENSE & CIVILIAN SPECIFICATIONS
DEFENSE & CIVILIAN SPECIFICATIONS* The following listing has been compiled from the latest available edition of the Department of Defense Index of Specifications and Standards (DODISS), which includes
More informationISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006
Coastline Metal Finishing is AS9100D Certified and NADCAP Accredited. ISO 9001:2015 incorporating the Requirements of AS9100D Certificate 14035ASR006 Nadcap Accredited AS7108 for Chemical Processing Thank
More informationBarry Avenue Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Barry Avenue Plating Inc 2210 Barry Ave 90064 United States This certificate demonstrates conformance and recognition
More informationRECOMMENDED APPLICATION PROCEDURE FOR SOLID FILM LUBRICANTS & COATINGS
Process Bulletin 3000-A s & Engineered Coatings Everlube Products Surface Technologies Division of Curtiss-Wright 100 Cooper Circle I Peachtree City, GA 30269 T: 770.261.4800 I F: 770.261.4805 I 800-428-7802
More informationCUSTOMER/MATERIAL SPECIFICATION
DATE: JANUARY/FEBRUARY 2017 MEMO TO: DISTRIBUTION LIST FROM: Document Control Center SUBJECT: NEW/REVISED SPECIFICATIONS/PROCEDURES The following customer and/or agency specifications have recently been
More informationProcurement Quality Clauses and Specifications
Procurement Quality Clauses and Specifications This document describes the Quality Clauses and Specifications applicable to Lynch Purchase Orders for materials and outsourced processes. The specific items
More informationSpecifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AP General Sealing 6-277, 6-281,6-286,6-287,6-288,6-291, 6-295, 6-296 PSD for 787 Only: PSD for 777 Only: BAC 5004 M Installation of Permanent Fasteners 6-121, 6-122, 6-133
More informationEvaluation of Dipsol IZ-C17 LHE Zinc-Nickel Plating
Evaluation of Dipsol IZ-C17 LHE Zinc-Nickel Plating By: Stephen Gaydos Boeing St. Louis for HCAT/JCAT Meeting January 24, 2007 1 Report Documentation Page Form Approved OMB No. 0704-0188 Public reporting
More informationPROCESS SPECIFICATION- SURFACE FINISH
1.0 SCOPE This specification establishes the priming, painting and topcoat color requirements for components in accordance with the customer contract specifications. This procedure shall be used for aluminum
More informationCadmium replacement options
Cadmium replacement options Keith Legg Rowan Technology Group JSF ESOH Working Group Keith Legg 847-680-9420 www.rowantechnology.com Definition Cd used on almost all exposed steel, usually chromated, primed,
More informationPrevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
More informationGlobal Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical
Global Metal Solutions Oil & Gas Aerospace Naval & Marine Power Generation Motor Sport Metalworking Medical Our pedigree Maher supplies advanced alloys for high performance applications. Founded in Sheffield
More informationElectroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
More informationHAND BOOK OF ELECTROPLATING ANODIZING & SURFACE FINISHING TECHNOLOGY
HAND BOOK OF ELECTROPLATING ANODIZING & SURFACE FINISHING TECHNOLOGY Principles of Electroplating The Electro Chemical Series Electrodeposition Electrochemical Terms Using a Copper Anode Using an Inert
More informationONE-STOP SHOP FOR AEROSPACE MATERIALS
ONE-STOP SHOP FOR AEROSPACE MATERIALS Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers.
More informationPCX Aerostructures, LLC Quality Notes Supplier Quality Assurance Requirements - Quality Clauses Revision 29 - March 30, 2017
PCX Aerostructures, LLC Quality Notes Supplier Quality Assurance Requirements - Quality Clauses Revision 29 - March 30, 2017 1.All special processes required by the Purchase Order must be performed by
More informationCompany Overview. Helicopters Components Engines
SETTING THE STANDARD OF CUSTOMER SERVICE Company Overview Helicopters Components Engines WWW. VECTORAEROSPACE. COM VISION... Setting the standard of customer service MISSION... We will be an industryleading,
More informationVOUGHT AIRCRAFT INDUSTRIES, INC. ASPL SPECIFICATIONS SORTED by PROCESS CODE
SPECIFICATIONS SORTED by PROCESS Nadcap NMSE NDT NDT NDT NDT SPECIFICATION STP51-402 STP51-406 STP51-501 STP53-001 STP53-201 STP53-301 STP53-701 STP53-903 VAII ASPL PROCESS 51402 CHEMICAL MILLING OF ALUMINUM
More informationYou count on availability. We provide reliable solutions.
You count on availability. We provide reliable solutions. Your global partner for military aviation Customers around the globe are faced with challenges every day, including increased demands on fleet
More informationASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
1 B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum 2 B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated
More informationDiamond Chrome Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Diamond Chrome Plating Inc 604 S. Michigan Ave Howell, MI 48844 United States This certificate demonstrates
More informationElectroplating. Copyright 2016 Industrial Metallurgists, LLC
Electroplating Northbrook, IL 847.528.3467 www.imetllc.com Copyright 2016 Industrial Metallurgists, LLC Course content 1. Process Steps (75 minutes) 2. Properties, Defects, and Evaluation (60 minutes)
More informationKeith Legg. Rowan Technology Group, Libertyville, IL , 3/2012 Granta EMIT
Keith Legg Rowan Technology Group, Libertyville, IL 847-680-9420, klegg@rowantechnology.com 3/2012 Granta EMIT Classifying more and more chemicals as SVHCs Chemicals drop from market as soon as put forward
More informationRoom Temperature Metal Blackening & Antiquing Processes. Hot & Mid Temp Oxide Finishes Metal Cleaning & Surface Preps
Specialty Chemical Manufacturer for the Plating and Metal Finishing Industries Where Finishing Excellence Begins Plating Processes Room Temperature Metal Blackening & Antiquing Processes Hot & Mid Temp
More informationPlasma Heat and Surface Treatment
Plasma Heat and Surface Treatment Plasmait is a supplier of heat and surface treatment solutions based on plasma technology. We design, build, deploy and support production machinery for continuous and
More informationOverview of Coatings and Surface Treatments
Overview of Coatings and Surface Treatments Looking around, it is apparent that there are coatings on many everyday objects. The desk you are sitting at is coated with a sealer, the walls of your office
More informationLiquid Accelerated Cold Spray
Liquid Accelerated Cold Spray CSAT Meeting Presentation 10/30/12 PI: Tom Butler, Ormond, LLC 253-852-1298 TPOC: Victor Champagne, ARL Phase II SBIR Contract # W911QX-11-C-0002 1 Presentation Summary Introduction
More informationSURFACE TECHNOLOGIES AND ADVANCED MANUFACTURING
SURFACE TECHNOLOGIES AND ADVANCED MANUFACTURING AEROSPACE POWER GENERATION OIL & GAS www.hycrome.com TEL: +44 (0)1282 418300 FAX: +44 (0)1282 418310 About Hycrome Hycrome was originally established in
More informationDETAIL SPECIFICATION CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
NOT MEASUREMENT SENSITIVE MIL-DTL-5541F 11 July 2006 SUPERSEDING MIL-C-5541E 30 November 1990 DETAIL SPECIFICATION CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS This specification is approved
More informationLow Volatile Organic Compound Containing Wash Primer for Letterkenny Army Depot
Low Volatile Organic Compound Containing Wash Primer for Letterkenny Army Depot by Fred Lafferman, Daniel Pope, and John Escarsega ARL-TR-6166 September 2012 Approved for public release; distribution is
More informationMagnetic Inspection Laboratory Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Magnetic Inspection Laboratory Inc. 1401 Greenleaf Avenue Elk Grove Village, IL 60007-5522 United States This
More informationCommonly used Specification s 6/28/2016
GE specifications Book 1 P1TF1 S13 076146 Supplier nonconforming material: review and disposition P1TF3 S34 DRAWING INTERPRETATION P1TF9 S14 079296 MACHINE FEATURES P1TF10 S14 078144 SHEET METAL PARTS
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationMagnesium-Rich Coatings
Magnesium-Rich Coatings Dr. Kevin Kovaleski NAVAIR Materials Engineering Division Patuxent River, MD ASETS Denver, CO 1-3 September, 2009 NAVAIR Public Release 09-772 Distribution: Statement A - "Approved
More informationNEW AIRCRAFT PRETREATMENT & WASH PRIMER SYSTEM. Angel Green Cortec Corporation 4119 White Bear Parkway White Bear Lake, MN
Paper No. 0 20 NEW AIRCRAFT PRETREATMENT & WASH PRIMER SYSTEM Angel Green Cortec Corporation 4119 White Bear Parkway White Bear Lake, MN 551 agreen@cortecvci.com ABSTRACT Today s Department of Defense
More informationTesting Cadmium-free Coatings
Testing Cadmium-free Coatings Dan Nymberg Focused Workshop on Cadmium Plating Alternatives 08-30-2011 Report Documentation Page Form Approved OMB No. 0704-0188 Public reporting burden for the collection
More informationMINIMIZING POLLUTION FROM CHEMICAL PRETREATMENT PROCESSES
MINIMIZING POLLUTION FROM CHEMICAL PRETREATMENT PROCESSES Copyright Ron Joseph & Associates, Inc. All rights rwerved. January 1991. part of this publication may be reproduced or distributed in any form
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 IMR TEST LABS 131 Woodsedge Drive Lansing, NY 14882 Deena Crossmore Phone: 607-533-7000 Deena.Crossmore@imrtest.com MECHANICAL Valid to: April 30, 2020 Certificate
More informationSUPERSEDING MIL-STD-193K 1 December 1986 MILITARY STANDARD
NOT MEASUREMENT SENSITIVE MIL-STD-193L 27 August 1991 SUPERSEDING MIL-STD-193K 1 December 1986 MILITARY STANDARD PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING
More informationThermal Diffusion Galvanizing
Engineering Test Report M-571 Thermal Diffusion Galvanizing For Pole Line Hardware Revision D 11.17.2017 Added further Corrosion Test results and Abrasion Test results Prepared by 1. Introduction to Thermal
More informationMethods of Corrosion Control. Corrosion Control or Corrosion Management?
Corrosion Control or Corrosion Management? Corrosion control is a process aimed at reducing the corrosion rate to a tolerable level (or predictable limits) Corrosion control focuses mainly on (i) materials
More informationDownloaded from DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD, LOCKED IN, KEY-LOCKED, MINIATURE AND LIGHTWEIGHT
INCH-POUND DETAIL SPECIFICATION SHEET 21 June 2012 SUPERSEDING MS51830E 9 March 1992 INSERT, SCREW THREAD, LOCKED IN, KEY-LOCKED, MINIATURE AND LIGHTWEIGHT This specification is approved for use by all
More informationNOT MEASUREMENT SENSITIVE DETAIL SPECIFICATION COATING, OXIDE, BLACK, FOR FERROUS METALS
NOT MEASUREMENT SENSITIVE MIL-DTL-13924D 18 March 1999 SUPERSEDING MIL-C-13924C 9 June l980 1. SCOPE DETAIL SPECIFICATION COATING, OXIDE, BLACK, FOR FERROUS METALS This specification is approved for use
More informationALKALINE CLEANING COMPOUNDS PRODUCT FEATURES - USE ENVIRONMENTAL -
For almost three-quarters of a century, Turco Products has been recognized around the world as the market leader in bringing innovative, cost-effective chemical technologies to bear on difficult processing
More informationALTA Precision Inc. Quality Procedure
ALTA Precision Inc. Quality Procedure Procedure QAP 7.4.2 Issue 7 Date September 28, 2015 Page 1 of 5 ALTA Quality Requirements for Suppliers Prepared and issued by Marc Dumouchel Approved by Sonia Alonso
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 2759/3D Issued OCT 1984 Revised FEB 2005 Superseding AMS 2759/3C Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts 1. SCOPE: This specification,
More informationCompany Introduction. Current key customers are: UTAS Triumph Actuation Systems MOOG Derco Aerospace Ratier-Figeac Sikorsky Sargent Aerospace
Company Introduction 2 plants located in Troy, Michigan Core product competencies include complex cylindrical hardware such as match valves, sleeve bearing cartridges, hydraulic pistons/shoes. In addition
More informationD PROCESS CODE INDEX (Sorted by Process Code)
Spec No Process Code D1-4426 PROCESS CODE INDEX Nadcap Commodity AC/AS Nomenclature REVISION EQ - September 1, 2006 Qual Sys Code 001 001 AQS 7004 Basic Quality System Qual Sys Code 002 002 QS D1-4426
More informationNadcap A Regulator s View. Dr E H Blacklay 21 March 2017
Nadcap A Regulator s View Dr E H Blacklay 21 March 2017 1 Nadcap Define Nadcap Nadcap Function Nadcap Administration Programme / Process Regulatory Acceptance Regulator s Observations 2 Nadcap Is a worldwide
More informationTypes of stainless steel
Types of stainless steel Composition (wt%) Applications Types C Ni Cr Mo Ferritic 0.06-0.2-11-30 - Household utensils; Automotive Exhaust Components Heat exchanger Austenitic
More informationCAE Application in Aerospace Industry
CAE Application in Aerospace Industry 1 Aerospace Industry CAE Overview Aerospace has typically been one of the top 3 industry segments for CAE Market Aerospace has historically driven CAE development
More informationNovel Corrosion Control Coating Utilizing Carbon Nanotechnology
Novel Corrosion Control Coating Utilizing Carbon Nanotechnology Susan A. Drozdz U.S. Army Engineer Research and Development Center Todd Hawkins Tesla NanoCoatings Limited Report Documentation Page Form
More informationTo better understand the concept of VpCIs, a review the concepts of corrosion and means of controlling it is needed. Background
A Hybrid Technology: Static Dissipative / VpCI Films Barry L. Rudman Christophe Chandler Cortec Corporation 4119 White Bear Parkway St. Paul, MN 55110 612-429-1100 Introduction Very few industries have
More informationD1 4426, Approved Process Sources. Purchase Order Flow Down Requirements
D1 4426, Approved Process Sources Purchase Order Flow Down Requirements Common Commodity Requirements Unique Commodity Additional Requirements Chemical Processes Heat Treat Materials Testing Laboratories
More informationFF-B-575C May 26, 1970 SUPERSEDING Fed. Spec. FF-B-575B September 12, 1960 Fed. Spec. FF-B-571A (In part) January 9, 1934 FEDERAL SPECIFICATION
FEDERAL SPECIFICATION BOLTS, HEXAGON AND SQUARE May 26, 1970 SUPERSEDING Fed. Spec. FF-B-575B September 12, 1960 Fed. Spec. FF-B-571A (In part) January 9, 1934 This specification was approved by the Commissioner,
More informationQ5: Is it MLSTD or 3021? It was said both ways. A5: MIL-STD 3021 DOD Manufacturing Process Standard Materials Deposition, Cold Spray
Overview of Cold Spray Technology for DoD and the Commercial Sector, Victor Champagne, US Army Research Laboratory, Director, ARL Center for Cold Spray Questions (24) Q1: Why do the particles need to be
More informationJoin India s First Indigenous Investment Casting foundry exclusively for Aerospace, Defence & Medical application
Join India s First Indigenous Investment Casting foundry exclusively for Aerospace, Defence & Medical application Aerospace Defense Medical A World Class Investment Casting Foundry AS9100 Certified Investment
More informationCURTISS WRIGHT Actuation Systems 201 Old Boiling Springs Rd Shelby, NC SUPPLIER QUALITY REQUIREMENTS SQR-100. Rev. L.
CURTISS WRIGHT Actuation Systems 201 Old Boiling Springs Rd Shelby, NC 28152-8008 SUPPLIER QUALITY REQUIREMENTS SQR-100 Rev. L Approved by: PREFACE This document is to be used to define the quality requirements
More informationITW ROCOL METAL ENRICHED PAINTS
ITW ROCOL METAL ENRICHED PAINTS The differences between standard paints and ROCOL Metal Enriched Paints are significant. Standard paints create a passive barrier, which when breached will offer no protection
More informationPREPARATION OF BASIS METALS FOR PLATING
I PREPARATION OF BASIS METALS FOR PLATING by Earl IC. Groshart Consultant, Seattle, WA If a plated deposit is to realize its full value on a part, it is absolutely necessary that it have the best possible
More informationFINGERSTOCK GASKETS. Physical Characteristics. Specific weight: 8.4g/cm 3 Melting point: 900 C Coefficient to expansion:
FINGERSTOCK GASKETS Application Due to their outstanding material and electrical characteristics, beryllium copper finger of different shapes and dimension are used in the following industries: Broadcasting,
More informationAerospace. High Strength Tubing Solutions for Critical Aerospace Applications
High Strength Tubing Solutions for Critical Applications High precision tubes for demanding environments Tubing Excellence With over 70 years of engineering expertise in supplying high-precision tubes,
More informationCHEMICAL METAL PRE-TREATMENT
Protection upgraded CHEMICAL METAL PRE-TREATMENT Basics and New Developments April 2017 April 18, 2017-1 - AGENDA 1 Basics about Chemical Metal Pre-Treatment 2 Cleaning and Pickling 3 Conversion Coating
More informationTable 2: Salt fog exposure testing Epoxy Salt fog exposure
ALUMINUM PHOSPHATE TECHNOLOGY ANTI-CORROSION APPLICATION DESCRIPTION Worldwide, the direct cost of corrosion is estimated to be more than $1.8T, which amounts to 3-4% of the GDP of industrialized countries.
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationDownloaded from MIL-DTL-45204D 29 June 2007 _ SUPERSEDING MIL-G-45204C 7 June 1983 w/amendment 3 9 June 1993
INCH-POUND 29 June 2007 _ SUPERSEDING MIL-G-45204C 7 June 1983 w/amendment 3 9 June 1993 DETAIL SPECIFICATION GOLD PLATING, ELECTRODEPOSITED This specification is approved for use by all Departments and
More informationHAP-free, Low VOC Chemical Spot Paint Removers for Army Weapons Systems (SAGE 16-06)
Distribution A: Approved for Public Release HAP-free, Low VOC Chemical Spot Paint Removers for Army Weapons Systems (SAGE 16-06) 21 January 2016 Approved for Public Release Jack Kelley Materials Engineer
More information3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009
3 Scotch-Weld TM Technical Data December, 2009 Product Description 3M Scotch-Weld is a gray, two-part, high strength adhesive that chemically cures at room temperature. It has good adhesion to a variety
More informationDETAIL SPECIFICATION PLATES, TAGS, AND BANDS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR
INCH-POUND MIL-DTL-15024F 28 November 1997 SUPERSEDING MIL-P-15024E 29 January 1993 DETAIL SPECIFICATION PLATES, TAGS, AND BANDS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR This specification
More informationOptimization of Zinc Phosphating Process using Statistical Tool
Optimization of Zinc Phosphating Process using Statistical Tool E.Gurunathan 1*, A.Senthilkumar 2 1* Department of CAD/CAM Engineering, Sethu Institute of Technology, India 2 Department of Mechanical Engineering,
More informationHARTZELL PROPELLER INC. One Propeller Place Piqua, Ohio U.S.A. Telephone: Fax:
HARTZELL PROPELLER INC. One Propeller Place Piqua, Ohio 45356-2634 U.S.A. Telephone: 937.778.4200 Fax: 937.778.4391 MANUAL REVISION TRANSMITTAL MANUAL 202A, (61-01-02) Standard Practices Manual REVISION
More informationMore than just a Zinc Phosphate. Zinc Phosphate ZP 10
More than just a Zinc Phosphate Zinc Orthophosphate Hydrate Corrosion can be inhibited by chemical and/or electrochemical (Active Pigments) or physical (Barrier Pigments) processes of anticorrosive pigments.
More informationUTAS Landing Systems Document Approved Processors
UTAS Landing Systems Document 200 - Approved Processors Data Updated: January 30, 2018 Revision Document 200 Text - Summary of Changes Date By NC Original 1/16/2009 CJB A Update to current practice 9/30/2010
More informationStatus of HCAT/JG-PP Program on Replacement of Hard Chrome Plating With HVOF Thermal Spray Coatings on Landing Gear
Paper published in Proceedings of AESF Aerospace Plating and Metal Finishing Forum, March 2000, pp. 131-139 Status of HCAT/JG-PP Program on Replacement of Hard Chrome Plating With HVOF Thermal Spray Coatings
More informationMuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4
MuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4 Available in coil, sheet, rod, billet, wire, and bar form, MuShield s High Permeability Magnetic Shielding is a soft magnetic
More information(864) SIZE 40 PSIG 60 PSIG 80 PSIG 100 PSIG 120 PSIG MT MT MT
www.tru-flo.com SIZE 40 PSIG 60 PSIG 80 PSIG 100 PSIG 120 PSIG MT04 38 56 75 94 113 MT12 62 94 125 156 187 MT16 137 206 275 344 412 MT17 180 270 360 450 540 MT21 250 375 500 625 750 MT26 375 562 750 937
More informationNeodymium Magnet Range
Neodymium Magnet Range 1 Contents About Neodymium magnets Magnetic properties Options of magnet plating Series of magnets Neodymium pot magnets With countersunk hole With through hole With threaded stud
More informationChromium Alternatives Qualification Testing. September 27, 2007
Chromium Alternatives Qualification ing Final Report September 27, 2007 PO No. 4200026907 US Air Force Plant (AFP) 44 Tucson, Arizona Prepared and Submitted by Concurrent Technologies Corporation 100 CTC
More informationGUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
More informationLatest High Tech Packaging Solutions From EcoCortec Patented VpCI Technology for Multi-Metal Corrosion Protection
++ BREAKING NEWS ++ BREAKING NEWS ++ BREAKING NEWS ++ BREAKING NEWS ++ Latest High Tech Packaging Solutions From EcoCortec Patented VpCI Technology for Multi-Metal Corrosion Protection Best Selling Anti-Corrosion
More informationThe Leader in Oilfield Coating Technology ISO 9001:2008.
The Leader in Oilfield Coating Technology ISO 9001:2008 www.ssplating.com Who We Are S&S Plating/Coating Dynamics is the leading provider of electro plated coatings to the oilfield, power generation and
More informationKanigen Group, your partner for electroless nickel plating
Kanigen Group Kanigen Group, your partner for electroless nickel plating Kanigen Group has been active in electroless nickel plating of technical parts since1960. In addition to electroless nickel using
More informationSOCOSURF TCS / SOCOSURF PACS
SOCOSURF TCS / SOCOSURF PACS CHROMIUM VI FREE CONVERSION AND SEALING Technical Data Sheet - Fiche Technique SOCOSURF TCS and SOCOSURF PACS products are an alternative process for chromated (chromium VI)
More informationCoating Specifications
Quadax Series Butterfly Valves Version May 2011 müller co-ax ag Gottfried-Müller-Str. 1 74670 Forchtenberg Germany Tel. +49 7947 828-0 Fax +49 7947 828-11 E-Mail info@co-ax.com Internet www.co-ax.com Table
More informationISO INTERNATIONAL STANDARD. Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron
INTERNATIONAL STANDARD ISO 15726 First edition 2009-02-01 Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron Revêtements métalliques et autres revêtements inorganiques
More informationAkzoNobel Aerospace Coatings. Aerospace Sustainability trends. Visit KIVI NIRIA November 20th 2012
AkzoNobel Aerospace Coatings Aerospace Sustainability trends Visit KIVI NIRIA November 20th 2012 Michela Fusco, Market Segment Manager Maintenance Aerospace Coatings Global market size is 250 million¹
More informationCrofer 22 H. High -temperature alloy. ThyssenKrupp. ThyssenKrupp VDM. Material Data Sheet No June 2010 Edition
Material Data Sheet No. 4050 June 2010 Edition High -temperature alloy ThyssenKrupp VDM ThyssenKrupp 2 Crofer 2 2 H* * is a high-temperature ferritic stainless steel especially developed for application
More informationInstitute of Materials Finishing. Introduction to the Surface Finishing Foundation Certificate
Introduction to the Surface Finishing Foundation Certificate The course/module for the Foundation Certificate is designed to provide personnel in surface finishing and related technologies the opportunity
More informationALUMINUM POWDER METALLURGY
ALUMINUM POWDER METALLURGY Increased demand for light weight components, primarily driven by the need to reduce energy consumption in a variety of societal and structural components, has led to increased
More informationAustralian Standard. Electroplated coatings of rhodium for general engineering applications AS AS 2429
AS 2429 2004 AS 2429 Australian Standard Electroplated coatings of rhodium for general engineering applications This Australian Standard was prepared by Committee MT-009, Metal Finishing. It was approved
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA Douglas Reed Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA 18940 Douglas Reed Phone: 267 759 3886 MECHANICAL Valid To: April 30, 2016 Certificate Number: 0478.01 In recognition
More informationEvaluation and Demonstration of Non-Hexavalent Chromium Pretreatments and Sealers for Steel Substrates
Brian E. Placzankis, Jack Kelley & Tom Braswell plaz@arl.army.mil, jkelley@arl.army.mil & thomas.e.braswell@arl.army.mil U.S. Army Research Laboratory BLDG 4600, Deer Creek Loop APG MD 21005 Bill Nickerson
More informationPRODUCT DATA SHEET TWO-PART GENERAL USE EPOXY A-1177-B, A-1228-B, A-1273-B
Page 1 of 1 DESCRIPTION SIA Adhesives A-1177-B is a versatile two-part room temperature curing adhesive. The product cures in 8-16 hours at room temperature to provide a movable assembly or may be accelerated
More informationBÖHLER SPECIAL MATERIALS SHEETS, PLATES AND BLANKS FOR THE AEROSPACE INDUSTRY
BÖHLER SPECIAL MATERIALS SHEETS, PLATES AND BLANKS FOR THE AEROSPACE INDUSTRY 1 QUALITY IS BEARING A NAME BÖHLER BLECHE... specialized in manufacturing single rolled sheets, plates and blanks for the aerospace
More informationNon-Polluting Metal Surface Finishing Pretreatment & Pretreatment/Conversion Coating
Technical Article Non-Polluting Metal Surface Finishing Pretreatment & Pretreatment/Conversion Coating by David Ferguson, CEF * and Dr. Bruce Monzyk Battelle Technical Editor s Note: Since the inception
More information