EACC-601. Combination Louver/Damper Concealed Actuator. Application and Design. Standard Construction

Size: px

Start display at page:

Download "EACC-601. Combination Louver/Damper Concealed Actuator. Application and Design. Standard Construction"

Toby White
6 years ago
Views:

Application and Design Concealed Actuator is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off.

1 Application and Design Concealed Actuator is a combination louver/damper designed to protect air intake and exhaust openings in building exterior walls that, at times, require tight air shut off. Design incorporates a drainable head member, drainable stationary blades, operable blades and a concealed actuator within the louver sill. When the operable blades are open, airflow is permitted through the louver, when the blades are closed, a tight seal is created to prevent the passage of air. Standard Construction Frame Heavy gauge extruded 6063-T5 aluminum, 6 in. x in. nominal wall thickness Blades Stationary blade: drainable design, heavy gauge extruded 6063-T5 aluminum, in. nominal wall thickness, positioned at 45º angles on approximately 6 in. centers Operable blade: heavy gauge extruded 6063-T5 aluminum, nominal wall thickness Seals Dual-durometer extruded vinyl blade seals Compressible stainless steel jamb seals Temperature Restrictions....(-20º F) - (+180ºF) Linkage Side linkage out of airstream (concealed in frame) Bearings......Synthetic sleeve type Axles ½ in. dia. zinc plated steel Actuator......Invensys MA series, 2 positioned spring return Construction... Mechanically fastened Birdscreen.....3/4 in. x in. flattened expanded aluminum in removable frame, inside mount (rear) Finish Mill Minimum Size..18 in. W x 24 in. H Maximum Single Section Size in. W or 96 in. H Options (at additional cost) A variety of bird and insect screens Extended sill Filter rack Flanged frame Hinged frame Security bars A variety of architectural finishes including: Clear anodize Integral color anodize Baked enamel paint Kynar paint *Width and height dimensions furnished approximately ¼ inch under size.

2 PERFORMANCE DATA Free Area Chart (Sq. ft.) Louver Height Inches Louver Width Inches kpa Air Leakage (with damper section closed) Test size 48 in. x 48 in. in. wg Pressure cfm/ft cmh/m Leakage Airflow Resistance (Standard Air lb/ft 3 ) Water Penetration (Standard Air lb/ft 3 ) Static Pressure Drop Pa in. wg Test Size 48 in. x 48 in. Standard Air lb/ft 3 Exhaust ft/min: Model resistance to airflow (pressure drop) m/s: varies depending on louver application (air intake or air exhaust). Free area velocities Free Air (shown) Velocityare higher than average velocity through the overall louver size. See louver selection information. Intake Test size 48 in. x 48 in. Test duration of 15 min. Water Penetration per Unit Free Area ml/m2 oz/ft Test Size 48 in. x 48 in. Test Period 15 minutes Standard Air lb/ft 3 ft/min: m/s: Free Area Velocity The AMCA Water Penetration Test provides a method for comparing various louver models and designs as to their efficiency in resisting the penetration of rainfall under specific laboratory test conditions. The beginning point of water penetration is defined as that velocity where the water penetration curve projects through.01 oz. of water (penetration) per sq. ft. of louver free area. * The beginning point of water penetration for Model is 1020 fpm free area velocity. These perfor mance ratings do not guarantee a louver to be weather proof or stormproof and should be used in combination with other factors including good engineering judgement in selecting louvers.

3 INSTALLATION DETAILS Maximum Size and Installation Information The maximum single section size for the is 60 in. W or 96 in. H. Larger openings require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand a 25 PSF wind-load (please consult Greenheck if the louvers must withstand higher wind-loads). Structural reinforcing members may be required to adequately support and install multiple louver panels within a large opening. Structural reinforcing members along with any associated installation hardware is not provided by Greenheck unless indicated otherwise by Greenheck. Additional information on louver installation may be found in AMCA Publication #501, Louver Application Manual. Minimum Single Section Size 18 in. W x in. H Maximum Single Section Size 60 in. W or 96 in. H

4 PRODUCT DETAILS

5 OPTION DRAWINGS FINISHES Finish Type Description/Application Color Selection Standard Warranty (Aluminum) 2-coat 70% Kynar 500 /Hylar 5000 AAMA 2605 Dry film thickness 1.2 mil. (AKA: Duranar, Fluoropon, Trinar, Flouropolymer, Polyvinylidene Fluoride, PVDF2) Best. The premier finish for extruded aluminum. Tough, long-lasting coating has superior color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Standard Colors: Any of the 24 standard colors shown can be furnished in 70% or 50% Kynar 500 /Hylar 5000 or Baked Enamel. 10 Years (Consult Greenheck for availability of extended warranty) 2-coat 50% Kynar 500 /Hylar 5000 AAMA 2604 Dry film thickness 1.2 mil. (AKA: Acroflur, Acrynar ) Baked Enamel AAMA 2603 Dry film thickness 0.8 mil. (AKA: Acrabond Plus, Duracron ) Better. Tough, long-lasting coating has excellent color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Good. Provides good adhesion and resistance to weathering, corrosion and chemical stain. 2-Coat Mica: Greenheck offers 9 standard 2- coat Mica colors. Other colors are available. Consult Greenheck for possible extra cost when selecting non-standard colors or special finishes. 5 Years 1 Year Integral Color Anodize AA-M10C22A42 (>0.7 mil) Clear Anodize 215 R-1 AA-M10C22A41 (>0.7 mil) Clear Anodize 204 R-1 AA-M10C22A31 (-0.7 mil) Industrial coatings Mill Two-step anodizing is produced by following the normal anodizing step with a second, colorfast process. Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Light, Medium or Dark Bronze; Champagne; Black Clear Clear Greenheck offers a number of industrial coatings such as Hi-Pro Polyester, Epoxy, and Permatector. Consult a Greenheck Product Specialist for complete color and application information. Materials may be supplied in natural aluminum or galvanized steel finish when normal weathering is acceptable and there is no concern for color or color change. 5 years 5 years 1 Year Consult Greenheck Finishes meet or exceed AAMA 2605, AAMA 2604, and AAMA 2603 requirements. Please consult for complete information on standard and extended paint warranties. Paint finish warranties are not applicable to steel products. n/a March 2011 Rev. 3 Copyright 2011 Greenheck Fan Corporation Greenheck Fan Corporation reserves the right to make product changes without notice.

EAD-635. Adjustable Louver Drainable Blades. Application and Design. Standard Construction. Options (at additional cost)

EAD-635. Adjustable Louver Drainable Blades. Application and Design. Standard Construction. Options (at additional cost) Application and Design Adjustable Louver Drainable Blades is an adjustable louver designed to protect air intake and exhaust openings in building exterior walls that require tight air shut off. Design