RMSI Rotary Magnetic Scale Incremental
|
|
|
- Noel Pitts
- 6 years ago
- Views:
Transcription
1 Counting Controlling RMSI Rotary Magnetic Scale Incremental - Rotational applications - Different ring materials available - Different pattern configurations Features From low to very high accuracy producible on demand One or two track magnetization Several pole pitches Different scale geometries Customizable for many applications No wear from usage Resistant to dust, cooling lubricant emulsion, oil, etc. Wide range of selectable magnetic scale characteristics Indicating movements with the RMSI axial and rotary A variety of magnetic materials for several applications Rotary scales can be adapted to many different requirements. The standard program covers many applications. 1/6
2 Features Magnetic Properties (elastomer bonded ferrite/isotropic) Residual induction (Br) mt Coercive force (Hcb) ka/m Intrinsic coercive force (Hcj) ka/m Maximum energy product (Bhmax) MGOe Reversing temperature modulus % / C Physical Properties Tensile strength N/mm²(MPa) >2.5 Hardness shore D Density g/cm³ Temperature range C -40 to 100 Chemical Properties Hydraulic oil (23 C 72h) ++ Alcohol (23 C 72h) + Weak alkali (23 C 72h) ++ Detergent (23 C 72h) ++ Aromatic solvent (23 C 72h) - Organic, anorganic acid (23 C 72h) - Aliphatic solvent (23 C 72h) - Water (60 C 72h) + - not suitable + good ++ very good Magnetic Properties (Hard ferrite/isotropic) Residual induction (Br) mt Coercive force (Hcb) ka/m Intrinsic coercive force (Hcj) ka/m Maximum energy product (Bhmax) MGOe Reversing temperature modulus % / C Physical Properties Tensile strength N/mm²(MPa) 50 Hardness HV Density g/cm³ Temperature range C -40 C to 250 C Chemical Properties Hydraulic oil (23 C 72h) ++ Alcohol (23 C 72h) + Weak alkali (23 C 72h) ++ Detergent (23 C 72h) ++ Aromativ solvent (23 C 72h) Organic, anorganic acid (23 C 72h) Aliphatic solvent (23 C 72h) Chemical resistance depends on temperature, concentration and time of exposure to the medium Water (60 C 72h) ++ - not suitable + good ++ very good Magnetic Properties (Vulcanized ferrite/isotropic) Residual induction (Br) mt 185 Coercive force (Hcb) ka/m 129 Intrinsic coercive force (Hcj) ka/m 257 Physical Properties Hardness shore A 85 ± 3 Density g/cm³ 4.13 Temperature range C -40 to 160 Chemical Properties Hydraulic oil (23 C 72h) +++ Alcohol (23 C 72h) ++ Weak alkali (23 C 72h) +++ Detergent (23 C 72h) +++ Aromatic solvent (23 C 72h) - Organic, anorganic acid (23 C 72h) - Aliphatic solvent (23 C 72h) - Water (60 C 72h) not suitable + good ++ very good 2/6
3 Technical Drawing Radial Axial 3/6
4 Available Rotary Magnetic Scale Incremental Dimensions Ferrite Rings (Radial) Order- No. Matchcode Numbers of Poles Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H) [mm] [mm] [mm] [mm] RMSI F ,75 14,7 4, RMSI F ,75 14,7 4, RMSI F 26 2,5 19,75 14,7 4, RMSI F 28 2,5 21,3 14,7 4, RMSI F ,3 14,7 4, RMSI24-76-F RMSI24-40-F RMSI24-32-F 32 2, RMSI24-16-F RMSI F , RMSI F , RMSI F 32 2,5 24, RMSI F , RMSI F , RMSI F , RMSI F 32 2,5 24, RMSI F , RMSI30-96-F , RMSI30-50-F , RMSI30-40-F 40 2, , RMSI30-20-F , RMSI30-96-F ,5 2, RMSI30-50-F ,5 2, RMSI30-40-F 40 2, ,5 2, RMSI30-20-F ,5 2, RMSI F ,9 21, RMSI F ,9 21, RMSI F 40 2,5 30,9 21, RMSI F ,9 21, RMSI F RMSI31-50-F RMSI31-40-F 40 2, RMSI31-20-F RMSI F ,21 25, RMSI F ,21 25, RMSI F , RMSI38-50-F 50 2, , RMSI38-24-F , RMSI F ,2 25, RMSI F ,2 25, RMSI F RMSI45-72-F RMSI F RMSI48-32-F RMSI F ,3 36, RMSI F ,3 36, RMSI F ,3 36, RMSI F ,7 37, RMSI F 64 2,5 48,7 37, RMSI F ,7 37, RMSI F ,7 41, RMSI F ,7 41, RMSI F ,6 52, RMSI F ,6 52,6 10 4/6
5 Order-No. Matchcode Numbers of poles Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H) [mm] [mm] [mm] [mm] RMSI F 80 2,5 62,6 52, RMSI F ,6 52, RMSI F RMSI72-88-F 88 2, Ferrite Rings (Axial) Order-No. Matchcode Numbers of poles Magnetic Pole Pitch Outer Diameter (OD) Inner Diameter (ID) Height (H) [mm] [mm] [mm] [mm] RMSI14-20A-F , RMSI14-16A-F 16 2, , RMSI14-10A-F , RMSI A-F 20 2,5 19,75 14,7 4, RMSI A-F ,75 14,7 4, RMSI24-24A-F RMSI24-20A-F 20 2, RMSI24-10A-F RMSI A-F , RMSI A-F , RMSI30-16A-F , RMSI30-28A-F ,5 2, RMSI30-16A-F ,5 2, RMSI A-F ,9 21, RMSI31-20A-F RMSI A-F ,21 25, RMSI38-108A-F , RMSI38-54A-F , RMSI38-44A-F 44 2, , RMSI45-50A-F 50 2, RMSI48-30A-F RMSI A-F ,7 37, RMSI A-F ,7 37, RMSI A-F ,7 41, RMSI72-200A-F RMSI72-100A-F RMSI72-80A-F 80 2, RMSI72-40A-F RMSI72-38A-F Customized Rotary Magnetic Scale Incremental Customized rotary magnetic scales with different dimensions and pole numbers can be produced economically. BOGEN scale production capabilities are designed for high flexibility at low cost. Please contact BOGEN to discuss your requirements. 5/6
6 Order Code Parameters RMSI D - N S - M - H - G - P - I Parammeters Code Explanation * D Outer Diameter [mm] Outer diameter of ring surface in millimeter N Number of Poles Even positive integer number S M H G P I Surface of Magnetization Magnetization Material Hub Material Accuracy Class Protection Index A Radial (default) Axial F Hard ferrite (8/22) E V P A S M G... S F P Z Elastomer bonded ferrite Vulcanized ferrite Plastoferrite Without hub (only for magnetization materials hard ferrite and plastoferrite) Aluminum Steel Sheet metal 600 Arc seconds (default) (Only necessary if deviates from default) Without protection (default) Stainless steel Fibre Plastic Without reference mark (default) North-south-north reference mark (*) standard parameters are bold Ordering Example RMSI50-64-F-A-G100 Rotary magnetic scale incremental, outer diameter 50mm, number of poles 64, surface of magnetization radial, magnetization material hard ferrite, hub material aluminum, accuracy class 100 arc seconds RMSI50-64A-E-S-G100-F-Z Rotary magnetic scale incremental, outer diameter 50mm, number of poles 64, surface of magnetization axial, magnetization material elastomer bonded ferrite, hub material steel, accuracy class 100 arc seconds, protection fibre, index north-south-north 6/6
RMSI Rotary Magnetic Scale Incremental
Meas uring Pos itioning RMSI Rotary Magnetic Scale Incremental - Rotational Applications - Different ring materials available - Different pattern configurations Areas of Application Industrial Goods Automation
Magnetic Scales. For Length and Angle Measurement.
Magnetic Scales. For Length and Angle Measurement. Magnetization for Angle, Length and Position Measurement. A precisely magnetized measurement scale or pole ring is an essential part of a perfect measurement
iglide A350 - Temperature and wear resistant
Compliant with both FD and EC Directive 10/2011 EC regulations Low moisture absorption Good with medium and high loads High temperature rating up to 356 F 447 - Temperature and wear resistant FD compliant,
- Hard ferrite magnets -
1. Application and purpose 2. Definitions 3. Characteristic material properties 4. Geometrical dependency 5. Permitted deficiencies 6. Coating 7. Safety instructions 8. Health risks 9. Freedom from pollutants
SmCo Samarium Cobalt Magnet Material
SmCo Samarium Cobalt Magnet Material Sintered Samarium Cobalt (SmCo) was the first of the Rare Earth family of permanent magnet materials. Developed in the 1960 s, it revolutionised magnetic design by
中国磁源材料有限公司 China Magnets Source Material Limited
中国磁源材料有限公司 China Magnets Source Material Limited Brief Introduction of CMS Magnets Set up in 1990, China Magnets Source Material Limited (CMS Magnets) specializes in research and development, production
iglide L250 Made specifically for applications with high rotations Very low coefficients of friction Excellent wear resistance
Made specifically for applications with high rotations Very low coefficients of friction Excellent wear resistance 299 - For high speeds For fast rotating applications Specially made for fast rotating
iglide H Can be used underwater For high temperatures Resistant to chemicals High load capabilities
Can be used underwater For high temperatures Resistant to chemicals igh load capabilities 369 - Universal igh temperature and chemical resistance Underwater applications Suitable for temperatures up to
PM Generators and the Magnet price development. Drivetrain concepts for wind turbines Bremen, 22.Oct Christian Contini, Dipl.-Ing.
PM Generators and the Magnet price development Drivetrain concepts for wind turbines Bremen, 22.Oct.2012 Christian Contini, Dipl.-Ing. (FH) PM Generator Overview Magnet Price Development Alternatives to
Just doing our bit to help make better cars. High-performance thin-shape anisotropic magnets FB13B / FB14H
Just doing our bit to help make better cars. High-performance thin-shape anisotropic magnets FB13B / FB14H Making a giant leap toward slimmer ferrite magnets Magnet usage is considered a barometer of the
Neodymium Magnet Range
Neodymium Magnet Range 1 Contents About Neodymium magnets Magnetic properties Options of magnet plating Series of magnets Neodymium pot magnets With countersunk hole With through hole With threaded stud
Bonded Neo Magnetization Guide
Bonded Neo Magnetization Guide 1 Presentation Outline 1. Magnetizing Systems 2. Fixture Design 3. Construction 4. Testing 5. Design Study 2 Magnetizing Systems A typical magnetizing system consists of
alphamagnet.com The Driving Force of Innovation
alphamagnet.com The Driving Force of Innovation ALPHA MAGNET ABOUT US ABOUT US Custom Magnet Solutions Alpha Magnet is a full magnet solutions provider specializing in high-end custom sintered neodymium
... self-lubricating and cost-effective...
xiros...... self-lubricating and cost-effective... $ $ New online service life calculator. Increased service life as a result of continuous development. www.igus.com/xiroslife plastics for longer life
Introduction of Magnetic Material Products
NTN TECHNICAL REVIEW No.8(212) [ New Product ] Introduction of Magnetic Products Takuji HARANO* Shinji MIYAZAKI* Hajime KATSUURA*, as one of the NTN group companies, develops various types of magnetic
iglide A181 Compliant with EC Directive 10/2011 EC FDA compliant Universally applicable Good media resistance Wear resistant
iglide 181 Compliant with EC Directive 10/2011 EC FD compliant Universally applicable Good media resistance Wear resistant 431 iglide 181 iglide 181 - FD and EC Directive compliant Food grade material
plastics for longer life
iros...... lubrication-free and cost-effective... New online service life calculator. Service life now longer by up to a factor of 10 thanks to continuous further development www.igus.eu/xiroslife plastics
Extrusion Based Additively Printed Magnets Outperforming Traditional Injection Molded Magnets
Extrusion Based Additively Printed Magnets Outperforming Traditional Injection Molded Magnets M. Parans Paranthaman Materials Chemistry Group Chemical Sciences Division Oak Ridge National Laboratory Oak
iglidur V400 high chemical- and temperature resistance iglidur X6 runs up to six times longer than iglidur X
polymer bearings iglidur Specialists High Temperatures iglidur V400 high chemical- and temperature resistance Standard range from stock from page 269 iglidur X6 runs up to six times longer than iglidur
Magnetic Guide Tape. MGL, MGR and MG-611A series are magnetic guide tape for MACOME guide sensors. 2. Model number, outer dimensions and installation
Magnetic Guide Tape 1. ummary MGL, MGR and MG-611A series are magnetic guide tape for MACOME guide sensors. Magnet: Anisotropic strontium ferrite (Binder; Chlorinated polyethylene polymer alloy) Residual
SHENZHEN NEWLAND MAGTECH CORPORATION
SHENZHEN NEWLAND MAGTECH CORPORATION MAGNET MAGNETIC MODULE www.newlandmagtech.com Context Company Briefing Permanent Magnet - NdFeB Magnetic Module Leading Technology Solution & Example 1 Company Briefing
Magnetization Fixture Design and Evaluation
Magnetization Fixture Design and Evaluation 1 Overview Introduction Salient features of the magnetizing fixture design Following aspects have been discussed A. Effect of additional back iron during in-situ
FDA-general purpose waterproof material. FDA-compliant and wearresistant. FDA-material for high temperatures and high load
polymer bearings Specialists Contact with Food 356 More information A180 FDA-general purpose waterproof material Standard range from stock from page 361 A200 FDA-compliant and vibrationdampening, absorbs
Application Information Guidelines for Designing a Concentrator for High-Current Sensing Applications with an Allegro Hall-Effect Sensor IC
Application Information Guidelines for Designing a Concentrator for High-Current Sensing Applications with an Allegro Hall-Effect Sensor IC By Cedric Gillet and Andreas Friedrich Introduction As with any
MATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1202 NOVEMBER 2003 MATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED TABLE OF CONTENTS 1202.01 SCOPE 1202.02 REFERENCES 1202.03
iglide Plain Bearings H370 - Technical Data
H370 iglide Plain Bearings H370 - Technical Data Product Range Standard Styles: Sleeve, Flange Custom shapes and sizes available Inner diameters: Inch sizes from 1/8-1-1/4 in. Metric sizes from 3-75 mm
Rod End. General Catalog A-941
Rod End General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the Rod End... Features... Special Bearing Alloy... Performance Test
POLYPAC - PHD Seal. Double Acting Heavy Duty High Pressure Material: PTFE, NBR Elastomer, POM
POLYPAC - PHD Seal Double Acting Heavy Duty High Pressure Material: PTFE, NBR Elastomer, POM 61 62 PHD Seal Description The PHD Seal is a high-pressure heavy-duty piston seal with excellent leakage control
The Seal Design Process
The Delta Rubber Thought Leadership Series The Seal Design Process By Kevin Violette The Delta Rubber Company This whitepaper describes the tools, methods and techniques used by Delta Engineering for the
Prestressed bolt connection. i ii? Calculation without errors. Project information. Input section
Prestressed bolt connection i ii? 1.0 1.1 1.2 1.3 1.4 1.5 Calculation without errors. Project information Loading of the connection, basic parameters of the calculation. Calculation units Loading conditions,
THERMAL SOLUTIONS HIGH FINNED TUBES GEWA-H, GEWA-HB
THERMAL SOLUTIONS HIGH FINNED TUBES GEWA-H, GEWA-HB HIGH FINNED TUBES GEWA-H, GEWA-HB APPLICATIONS GEWA-H and GEWA-HB high finned tubes are made of aluminium alloys or copper and copper alloys. They are
Outline. Introduction. Finite Element Analysis. Experimental Validation. Conclusion FB-08. Magnetization Estimated Magnet Flux and Motor Performance
Influence of Soft Magnetic Material type in Fixture Components on the Magnetization of Bonded Neo Magnet and Motor Performance Angara Raghu C. S. Babu, Kirk Wei Hsu, Paul John Villar, Dr. Sheth Nimitkumar
Paper, Cork & Rubber. Sheet Material. Telephone : Fax : E- mail :
Paper, Cork & Rubber 165 Paper, Rubber & Cork Gasket Materials Rubber, cork and paper-based gasket materials offer a low cost sealing solution for applications where the additional strength offered by
BI-MATERIAL COMPONENTS USING POWDER INJECTION MOLDING: DENSIFICATION, SHAPE COMPLEXITY, AND PERFORMANCE ATTRIBUTES
BI-MATERIAL COMPONENTS USING POWDER INJECTION MOLDING: DENSIFICATION, SHAPE COMPLEXITY, AND PERFORMANCE ATTRIBUTES Randall M. German, Donald F. Heaney, and John L. Johnson Center for Innovative Sintered
Bearings for Offshore / Civil Engineering
Bearings for Offshore / Civil Engineering Your Partner for Complete Solutions Self-lubricating radial spherical plain bearing GE HS The self-lubricating, maintenance-free HUNGER radial spherical plain
INIZIATIVE INDUSTRIALI
INIZIATIVE INDUSTRIALI S.p.A. Sarplast is a company located in Santa Luce (Pisa, Italy) which has over 35 years experience in the design, manufacturing and supply of Glass-Fiber Reinforced Plastic (GRP)
Belleville Spring. The relation between the load F and the axial deflection y of each disc. Maximum stress induced at the inner edge
Belleville Spring Disc spring, also called Belleville spring are used where high capacity compression springs must fit into small spaces. Each spring consists of several annular discs that are dished to
A versatile solution Polymer ball bearings from SKF. Corrosion and chemical resistant Lightweight and quiet running No lubrication needed
A versatile solution Polymer ball bearings from SKF Corrosion and chemical resistant Lightweight and quiet running No lubrication needed Polymer ball bearings from SKF for unique application conditions
iglidur A180 FDA-general purpose waterproof material
A18 A18 FDA-general purpose waterproof material Standard range from stock The A18 material complies with FOOD AND DRUG ADMINISTRATION (FDA) regulations For direct contact with food or pharmaceuticals For
Corso di Studi di Fabbricazione
Corso di Studi di Fabbricazione 3b Richiami dei processi tecnologici di trasformazione TUBE ROLLING 1 2 TUBE ROLLING Rolling allows to obtain seamless tubes that are strong and reliable. Altenatively,
Elring Sealing Compound Dirko TM gray. T e c h n i c a l D a t a s h e e t
the permanently-elastic, temperature-resistant sealing compound Description and field of application is a high-temperature sealing compound on a silicone base. cures by reacting with the humidity in the
Fundamental Course in Mechanical Processing of Materials. Exercises
Fundamental Course in Mechanical Processing of Materials Exercises 2017 3.2 Consider a material point subject to a plane stress state represented by the following stress tensor, Determine the principal
iglidur P Cost-Effective and Maintenance-Free iglidur P Phone Fax Low water absorption Low wear rates
P Cost-Effective and Maintenance-Free Low water absorption Low wear rates High load capacity Maintenance-free Cost-effective 17.1 P Cost-Effective and Maintenance-Free With the plain bearing, the user
The Magic of MagiDrives
TECHNICAL BULLETIN The Magic of MagiDrives When transmitting rotary motion through some sort of environmental boundary / wall there are a variety of engineering solutions available, from simple O-ring
HYDRAULICS - INTRODUCTION
HYDRAULIC SEALS HYDRAULICS - INTRODUCTION Sealing elements substantially influence design, function and durability of hydraulic and pneumatic cylinders. This applies both to seals for rods and seals for
ADLOCK 121 TWO-PART TOUGHENED ACRYLIC ADHESIVE TECHNICAL DATA SHEET
ADLOCK 121 TWO-PART TOUGHENED ACRYLIC ADHESIVE TECHNICAL DATA SHEET ADLOCK 121 (9002U) ADVANTAGES: 1. RAPID BONDING Curing time is 5 10 minutes at room temperature. Quick curing time shortens manufacturing
Grease Lubricated High-speed Deep Groove Ball Bearing for EV and HEV Motor
[ New Product ] Grease Lubricated High-speed Deep Groove Ball Bearing for EV and HEV Motor Masahiko SATODA* Goro NAKAO* EV and HEV are tending to increase the output by increasing the rotational speed
...our linkages, your solution. Rod Ends
...our linkages, your solution ov-rod-ends-divider - Updated - 12-01-2017 Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing.
Permanent Magnet Options: How To Select The Optimum Solution For Your Application.
Permanent Magnet Options: How To Select The Optimum Solution For Your Application. Dr. John Ormerod Senior Technology Advisor Magnet Applications, Inc. Presentation Outline Introductions. Major permanent
Magnetic Separator. Self-Cleaning Suspended Electro Magnetic Separator. Features
Self-Cleaning Suspended Electro Magnetic Separator Suspended magnetic separators are designed for separation of ferrous metal from a variety of over-the-belt conveyor applications. The Self-Cleaning Suspended
CoroDrill 428 Wide range of application possibilities
A CoroDrill 428 Wide range of application possibilities Gun drills DEE HOLE MACHINING Highly productive gun drills B Easy to use Solid carbide gun drills 428.5 - Diameter range: 0.8-12.00 mm (.031 -.472
Increased resistance to buckling of piston rods through induction hardening
Increased resistance to buckling through IH Page 1(6) Increased resistance to buckling of piston rods through induction hardening Summary Induction hardening of hydraulic cylinder piston rods engenders
Mechanical Requirements for Stainless Steel & Non-Ferrous Fasteners
Mechanical Requirements for Steel & Non-Ferrous Fasteners Grade(1 ) General Descriptio n of Material Bolts, Screws and Studs Full Size Bolts, Screws, Studs Yield (2) Strengt h Min Tensile Strengt h Min
PIPE in PIPE instead of replacing existing pipes!
InsaTech.US PIPE in PIPE instead of replacing existing pipes! THE NEW INNOVATIVE Rehabilitation Technology CLEAN PIPES are environmental friendliness YOUR PARTNER FOR Rehabilitation Technology The InsaTech
iglidur Low water absorption
iglidur Versatile, waterproof. With the iglidur plain bearing, the user has a cost-effective, maintenance-free plain bearing. Compared to iglidur G plain bearings made of iglidur are better suited to rotating
Industrial Self-Lubricating Bearings World Leader in Self-Lubricating Liner Systems
Metric Industrial Self-Lubricating Bearings World Leader in Self-Lubricating Liner Systems +1 (714) 841-3007 www.rbcbearings.com sales@rbcbearings.com Version No. 101 Last Revised: 03/19/2015 SELF-LUBRICATING
Preparative, Pilot & Process Columns
Preparative, Pilot & Process Columns 321 Preparative, Pilot & Process Columns Contents Prep Columns... 322-323 Dynamic Axial Compression Columns (DAC)... 324-325 Pilot Columns... 326-327 Chromatography
NdFeB. Title Here. for High Temperature Motor Applications. Author Venue. Steve Constantinides. Date. with Dale Gulick
NdFeB Title Here for High Temperature Motor Applications Author Venue Steve Constantinides Date with Dale Gulick SMMA Fall Technical Conference November 3-5, 24 1 Arnold Magnetic Technologies Topics Magnet
A Review of Suitability for PWHT Exemption Requirements in the Aspect of Residual Stresses and Microstructures
Transactions, SMiRT-23 Division IX, Paper ID 612 (inc. assigned division number from I to X) A Review of Suitability for PWHT Exemption Requirements in the Aspect of Residual Stresses and Microstructures
Roll No. B.E / B.Tech ( Part Time ) DEGREE END SEMESTER EXAMINATIONS, APRIL / MAY Mechanical Engineering. Third Semester
Roll No. B.E / B.Tech ( Part Time ) DEGREE END SEMESTER EXAMINATIONS, APRIL / MAY 2014 Mechanical Engineering Third Semester PTME232/PTME281/PTME9203 KINEMATICS OF MACHINES (Regulation 2002/2005/2009)
Report for Handbook on large plastic pipes, published 2015, ISBN
Relining with large diameter Polyethylene Pipes Damaged and leaky pipes made out o concrete, GRP, steel, ductile iron can be relined and renovated with Proiled Polyethylene Pipes in almost every diameter.
iglidur F The Lightning Conductor iglidur F Phone Fax Electrically conductive High compressive strength
The Lightning Conductor Electrically conductive High compressive strength High temperature resistance High p x v value Good resistance to chemicals 11.1 The Lightning Conductor When the electrical conductivity
18 januari. LOCK RINGS on OCTG tubulars in Oil Field applications: RP/2014 Eng. Jan januari
LOCK RINGS on OCTG tubulars in Oil Field applications: RP/2014 Eng. Jan - 002 18 januari 18 januari A study into the use of locking rings on OCTG pipes versus the alternative use of bonding of Rubber based
Automotive & Mechanical Applications Broad Base. Best Solutions.
Carbon and Graphite Materials for Mechanical Seals Automotive & Mechanical Applications Broad Base. Best Solutions. Tribological Behavior Friction Friction depends on surface finish of the mating surfaces
Technical Data Sheet 8330S. Silver Conductive Epoxy Adhesive. Description. Features and Benefits
Technical Data Sheet Silver Conductive Epoxy Adhesive Description 8330S is an electrically conductive, silver-filled two-part epoxy adhesive with a long working life. It is smooth, non-sagging, thixotropic,
Effects of Forming Conditions on Wrinkling in Necking of Tube End* 1
Materials Transactions, Vol. 52, No. 1 (2011) pp. 31 to 36 #2011 The Japan Society for Technology of Plasticity Effects of Forming Conditions on Wrinkling in Necking of Tube End* 1 Yoichi Takahashi 1,
DNV-RP-F101 Checker. User Manual
DNV-RP-F101 Checker User Manual For Version: 1.0.0 Copyright 2010-2017 OPIMsoft Technology Co., Ltd. All Rights Reserved. INDEX 1 FUNCTION... 1 2 INSTALLATION... 2 3 HOW TO USE... 3 3.1 Getting Started...
A versatile solution Polymer ball bearings from SKF. Corrosion and chemical resistant Lightweight and quiet running No lubrication needed
Берг АБ skf@bergab.ru Тел.()-22--,факс () 22- A versatile solution Polymer ball bearings from SKF Corrosion and chemical resistant Lightweight and quiet running No lubrication needed Берг АБ skf@bergab.ru
Bearings with Solid Lubricants
SURVEY Bearings with Solid Lubricants Y. FUJII H. ONO With recent progress in technology, s have been used in severe environments and in extreme conditions. Especially, highly advanced technology requires
p. 6.1 February 2003 Rev. C Cast ALNICO Permanent Magnets
p. 6. February 003 Rev. C Cast ALNICO Permanent Magnets ALNICO PERMANENT MAGNETS Introduction For over 50 years an acknowledged leader in the field of permanent magnets, Arnold Engineering continues its
Residual stresses in machined and shrink-fitted assemblies
675 Residual stresses in machined and shrink-fitted assemblies Bin Su, Foroogh Hossainzadeh, Chris Truman and David Smith 1 Department of Mechanical Engineering, University of Bristol, Queen s Building,
Analysis of Concrete Filled Double Skin Steel Tube (CFDST) column with CFRP wrapping
Analysis of Concrete Filled Double Skin Steel Tube (CFDST) column with CFRP wrapping Anju Alias 1, Susan Jacob 2 1PG Student, Department of Civil Engineering, FISAT, Angamaly, India 2Assistant Professor,
SAUTER HMM Version /2018 GB
Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@sauter.eu Tel.: +49-[0]7433-9933-199 Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Mobile Leeb Hardness Tester SAUTER HMM Version
BAS-010 B.TECH. (AEROSPACE ENGINEERING) LC) PROGRAMME (BTAE) BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-010 B.TECH. (AEROSPACE ENGINEERING) LC) PROGRAMME (BTAE) CO Term-End Examination r I June, 2012 BAS-010 : MACHINE DESIGN Time : 3 Hours Maximum Marks : 70 Note Attempt any
A comparison of chosen permanent magnets arrangements for high gradient magnetic fields generation
A comparison of chosen permanent magnets arrangements for high gradient magnetic fields generation ALEŠ HÁLA Department of Electrical Engineering and Electronics University of Defence Kounicova 65, 612
iglidur J200 For Anodized Aluminium iglidur J200 Phone Fax Very long service life with hard anodized aluminium
For Anodized Aluminium Very long service life with hard anodized aluminium Low coefficients of friction Low wear Maintenance-free 28.1 For Anodized Aluminium The specialist for low friction-values and
NEW SOUTH WALES DEPARTMENT OF EDUCATION AND TRAINING. Manufacturing and Engineering ESD. Sample Examination EA607 MAGNETIC PARTICLE TESTING
Name: NEW SOUTH WALES DEPARTMENT OF EDUCATION AND TRAINING Manufacturing and Engineering ESD Sample Examination EA607 MAGNETIC PARTICLE TESTING AS3998 LEVEL 2 1143B 6161J * * * * * * * Time allowed Two
PTFE semi-finished products and finished parts
Material characteristics PTFE = Polytetrafluorethylene PTFE is excellently suited as a construction material for the chemicals industry. It temperature resistance ranges from -190 C to +250 C, and it can
THERMOFIT ADHESIVE S Flex Fluid Resistant, High Temperature, One Part-Flexible Epoxy
TE Connectivity 30 Constitution Drive Menlo Park, CA 9402 USA SPECIFICATION THIS ISSUE: DATE: REPLACES: RT-1014 ISSUE 4 April 19, 2016 Issue 3 1. SCOPE THERMOFIT ADHESIVE S-12-04 Flex Fluid Resistant,
NAOSITE: Nagasaki University's Ac Title Author(s) Citation Preparation of ring-shaped composit controlled anisotropy distribution Yamashita, F; Yamada, O; Ohya, Shih Fukunaga, Hirotoshi Journal of Physics:
Index INDEX. Technical Characteristics Technical Dimensions Polyamide Light Roller Load Capacity... 7
U-RAIL Svanemærket tryksag 541-713 INDEX Index Technical Characteristics... 4-5 Technical Dimensions... 6 Polyamide Light Roller Load Capacity... 7 Polyamide Light Roller with Flange... 8-16 Standard Roller...
136. Roller spinning forming regularity
136. Roller spinning forming regularity Yang Pan 1, Li Xueguang 2, Chen Zhe 3, Yu Yang 4 College of Mechanical and Electric Engineering, Changchun University of Science and Technology, Changchun, 130022,
CATALOG NO.4000E. Hybrid Bearing Units for Special Environments
CATALOG NO.4000E Hybrid Bearing Units for Special Environments CERABALL SERIES The Ceraball series exhibits extremely high antiabrasion qualities and offers remarkably stable performance in the most severe
OPTIMIZATION OF STEEL CONNECTING ROD BY ALUMINUM CONNECTING ROD USING FINITE ELEMENT ANALYSIS
OPTIMIZATION OF STEEL CONNECTING ROD BY ALUMINUM CONNECTING ROD USING FINITE ELEMENT ANALYSIS 1 Tukaram S. Sarkate, Sachin P. Washimkar, 3 Sachin S. Dhulekar 1,, 3 B.E., Babasaheb Naik College of Engineering,
Bearings for Extreme Special Environments - Part 3 Basic Performance of Ceramic (Silicon Nitride) Bearings
Bearings for Extreme Special Environments - Part 3 Basic Performance of Ceramic (Silicon Nitride) Bearings H. TAKEBAYASHI * *Bearing Engineering Center, EXSEV Engineering Department Outlines of Koyo EXSEV
1 The Eldon James Flexelene TM tubing combines the excellent inert qualities of polyethylene with the flexibility found in 78A durometer PVC tubing. F
1 The Eldon James Flexelene TM tubing combines the excellent inert qualities of polyethylene with the flexibility found in 78A durometer PVC tubing. Flexelene TM is manufactured without the use of plasticizers,
CORROSION-RESISTANT SILICONE GASKETS
CORROSION-RESISTANT SILICONE GASKETS CORROSION-RESISTANT SILICONE GASKETS 63 GETELEC - 375 avenue Morane Saulnier - CS 34030-78535 Buc Cedex - France Tel. +33 1 39 20 42 42 - Fax: +33 1 39 20 42 43 - Email:
MATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1202 NOVEMBER 2016 MATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED TABLE OF CONTENTS 1202.01 SCOPE 1202.02 REFERENCES
NEOREC Series. Neodymium Magnets. Product Guide. Introduction. Features of TDK neodymium magnets. Typical material characteristics.
Product Guide Introduction ic characteristics transition of TDK neodymium magnet Features of TDK neodymium magnets ic characteristics distribution charts of Transition of dysprosium reduction / new material
DESCRIPTION Variobond is a thixotropic, two component bonding paste based on solvent free epoxy resins and polyamine adduct hardeners.
page 1 of 5 DESCRIPTION Variobond is a thixotropic, two component bonding paste based on solvent free epoxy resins and polyamine adduct hardeners. PRINCIPAL CHARACTERISTICS Suitable as adhesive for bonding
Turcon AQ-Seal 5. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer
Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 41 42 Turcon AQ-Seal 5* Description The Turcon AQ-Seal 5 is a patented development of the proven standard Turcon
CHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION 1.1. GENERAL INTRODUCTION Shell and tubes heat exchangers are used in a wide variety of applications in many industries for heat transfer purposes. The integrity of tube-tubesheet
Forming Hub Cold Forming Rolling Hot Forging
S O F T WA R E F O R F O R M I N G S I M U L AT I O N well formed PART OF Simufact addresses companies from the manufacturing industries which are specialized in the area of metal forming and joining processes.
Earthquake Analysis for Cryogenic Components of NPDG Liquid Hydrogen Target
Earthquake Analysis for Cryogenic Components of NPDG Liquid Hydrogen Target at SNS, Oak Ridge. TN Prepared by: Walt Fox, CEEM, Indiana University, 7 15 2010 (Revised 10 15 2010, 2 nd Revision 1 21 2011)
ALLROUNDER CUTTING TAPS
ALLROUNDER CUTTIN TAPS TECHNIK FÜR EWINDE ALLROUNDER Our multi-purpose cutting taps cover a comprehensive range of materials. They can be applied for the reliable machining of various materials ranging
One-part Epoxy, Electrically Conductive Adhesive, Low Tg
Technical Data Sheet One-part Epoxy, Electrically Conductive Adhesive, Low Tg Description 9400 is an electrically conductive, silver-filled, one-part epoxy adhesive with a low cure temperature. It is smooth,
PERFORMANCE EVALUATION AND SIMULATION OF POLYMER BALL BEARING IN ELECTRIC MOTOR & CIRCULATING PUMP APPLICATION
PERFORMANCE EVALUATION AND SIMULATION OF POLYMER BALL BEARING IN ELECTRIC MOTOR & CIRCULATING PUMP APPLICATION Pritesh J.Thoriya 1, Prof.B.N.Gelot 2 1 Mechanical Engg. Department, Government Engg. College,
TECHNICAL DATA SHEET February HBF 100 Low Modulus - HIGH PERFORMANCE ARCHITECTURAL SILICONE SEALANT
Description HBF 100 silicone sealant is a high performance neutral cure sealant specially formulated for use in aluminium façade systems and other situations where a low modulus, high joint movement silicone
ENGINEERING FOR SPHERICALS, ROD ENDS AND JOURNALS
ENGINEERING RBC offers many types and sizes of plain bearings to the aircraft industry. Both metal-to-metal and self-lubricating bearings are featured in this catalog. These bearings have been qualified