Mechanical Properties Test Method Unit
|
|
|
- Gillian Knight
- 6 years ago
- Views:
Transcription
1 TECHNICAL DATA SHEET Mirafi 100CX Mirafi 100CX is composed of high-tenacity polypropylene yarns, which are woven into a stable network such that the yarns retain their relative position. 100CX is inert to biological degradation and Typical Grab Tensile Strength ASTM D 4632 kn (lbs) 0.4 (90) 0.4 (90) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 kn (lbs) 0.22 (50) 0.22 (50) Mullen Burst Strength ASTM D 3786 kpa (psi) 1376 (200) Puncture Strength ASTM D 4833 kn (lbs) 0.22 (50) Percent Open Area COE % 1 Permittivity ASTM D 4491 sec (10.0) Weight ASTM D 5261 g/m 2 (oz/yd 2 ) 108 (3.2) Thickness ASTM D 5199 (mils) 0.38 (15) 0.9 x misc (3 x misc) Roll Area 2 (yd 2 ) varies Estimated Roll Weight -- kg (lb) varies DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification and warranty information. 100CX.DOC Revision: 3 Date: January 1, 2002
2 TECHNICAL DATA SHEET Mirafi 100X Mirafi 100X is composed of high-tenacity polypropylene yarns, which are woven into a stable network such that the yarns retain their relative position. 100X is inert to biological degradation and 100X meets AASHTO M specification for unsupported silt fence. Grab Tensile Strength ASTM D 4632 N (lbs) 0.55 (124) 0.55 (124) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 N (lbs) 0.29 (65) 0.29 (65) Mullen Burst Strength ASTM D 3786 kpa (psi) 2060 (300) Puncture Strength ASTM D 4833 N (lbs) 266 (60) Permittivity ASTM D 4491 sec (10) Weight ASTM D 5261 g/m 2 (oz/yd 2 ) 108 (3.2) Thickness ASTM D 5199 Mm (mils) 0.38 (15) m 0.9 x (3 x 330) Roll Area 2 (yd 2 ) 92 (110) Estimated Roll Weight -- kg (lb) 12 (26) DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification and warranty information. 100X.DOC Revision: 5
3 TECHNICAL DATA SHEET Mirafi 500XL Mirafi 500XL is composed of high-tenacity polypropylene yarns, which are woven into a stable network such that the yarns retain their relative position. 500XL is inert to biological degradation and GrabTensile Strength ASTM D 4632 kn (lbs) 0.62 (140) 0.62 (140) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 kn (lbs) 0.2 (45) 0.2 (45) Mullen Burst Strength ASTM D 3786 kpa (psi) 2240 (325) Puncture Strength ASTM D 4833 kn (lbs) 0.29 (65) Percent Open Area COE % 1 Permittivity ASTM D 4491 sec (4.0) Weight ASTM D5261 g/m 2 (oz/yd 2 ) 115 (3.4) Thickness ASTM D5199 (mils) 0.51 (20) m 3.8 x (12.5 x 504) Roll Area 2 (yd 2 ) 585 (0) Estimated Roll Weight -- kg (lb) 89 (195) DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification. RJPSS Revision: 1
4 TECHNICAL DATA SHEET Mirafi 500X Mirafi 500X is composed of high-tenacity polypropylene yarns, which are woven into a stable network such that the yarns retain their relative position. 500X is inert to biological degradation and Wide Width Tensile Strength ASTM D 4595 kn/m (lbs/in) 17.6 (100) 21.0 (120) Grab Tensile Strength ASTM D 4632 kn (lbs) 0.9 (200) 0.9 (200) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 kn (lbs) 0.33 (75) 0.33 (75) Mullen Burst Strength ASTM D 3786 kpa (psi) 2756 (400) Puncture Strength ASTM D 4833 kn (lbs) 0.4 (90) Percent Open Area COE % (50) Permittivity ASTM D 4491 sec (5.0) Weight ASTM D 5261 g/m 2 (oz/yd 2 ) 136 (4.0) Thickness ASTM D 5199 (mils) 0.51 (20) 3.8 x 132 (12.5 x 432) 5.3 x 94.2 (17.5 x 309) Roll Area 2 (yd 2 ) 502 (600) 502 (600) Estimated Roll Weight -- kg (lb) 95 (210) 95 (210) DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification. JPSS Revision: 1
5 TECHNICAL DATA SHEET Mirafi 550X Mirafi 550X is composed of high-tenacity polypropylene yarns, which are woven into a stable network such that the yarns retain their relative position. 550X is inert to biological degradation and Grab Tensile Strength ASTM D 4632 kn (lbs) 1.11 (250) 1.11 (250) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 kn (lbs) 0.4 (90) 0.4 (90) Mullen Burst Strength ASTM D 3786 kpa (psi) 3450 (500) Puncture Strength ASTM D 4833 kn (lbs) 0.45 (100) (40) Permittivity ASTM D 4491 sec (4) Weight ASTM D 5261 g/m 2 (oz/yd 2 ) 163 (5.0) Thickness ASTM D 5199 (mils) 0.5 (20) 3.8 x 110 (12.5 x 360) 5.3 x 78.7 (17.5 x 258) Roll Area 2 (yd 2 ) 418 (500) 418 (500) Estimated Roll Weight -- kg (lb) 102 (225) 102 (225) DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification. JPSS Revision: 1
6 TECHNICAL DATA SHEET Mirafi 600X Mirafi 600X is composed of high-tenacity polypropylene yarns, which are woven into a stable network such that the yarns retain their relative position. 600X is inert to biological degradation and Wide Width Tensile Strength ASTM D 4595 kn/m (lbs/in) 30.6 (175) 30.6 (175) Grab Tensile Strength ASTM D 4632 kn (lbs) 1.40 (315) 1.40 (315) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 kn (lbs) 0.53 (120) 0.53 (120) Mullen Burst Strength ASTM D 3786 kpa (psi) 4134 (600) Puncture Strength ASTM D 4833 kn (lbs) 0.53 (120) Percent Open Area COE % (40) Permittivity ASTM D 4491 sec (4.0) Weight ASTM D 5261 g/m 2 (oz/yd 2 ) 203 (6.0) Thickness ASTM D 5199 (mils) 0.64 (25) 3.8 x 110 (12.5 x 360) 5.3 x 78.7 (17.5 x 258) Roll Area 2 (yd 2 ) 418 (500) 418 (500) Estimated Roll Weight -- kg (lb) 109 (240) 109 (240) DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification. JPSS Revision: 1
7 TECHNICAL DATA SHEET Mirafi Envirofence Mirafi Envirofence is a silt fence structure which encompasses Mirafi 100X, a woven fabric comprised of high tenacity polypropylene yarns, and a plastic net backing for additional support. Mirafi Envirofence is prefabricated with 3.2cm (1.25 ) nominal square hardwood posts and is ready for iediate installation upon delivery. Mechanical Properties (Fabric) Test Method Unit Grab Tensile Strength ASTM D 4632 N (lbs) 550 (124) 550 (124) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 N (lbs) 290 (65) 290 (65) Mullen Burst Strength ASTM D 3786 kpa (psi) 2060 (300) Puncture Strength ASTM D 4833 N (lbs) 290 (65) Permittivity ASTM D 4491 sec (10) Weight ASTM D 5261 g/m 2 (oz/yd 2 ) 108 (3.2) Thickness ASTM D 5199 (mils) 0.38 (15) Post Spacings 2.5 (8.3) 0.9 x 30 (3 x 100) Estimated Roll Weight -- kg (lb) 18 (40) DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification and warranty information. ENVRFENC.DOC Revision: 4 Date: January 1, 2002
8 TECHNICAL DATA SHEET Mirafi Silt Fence Mirafi Silt Fence is a silt fence structure, which encompasses Mirafi 100X, a woven fabric comprised of high tenacity polypropylene yarns. Mirafi Silt Fence is prefabricated with 3.2cm (1.25 ) nominal square hardwood posts and is ready for iediate installation upon delivery. Mechanical Properties (Fabric) Test Method Unit Grab Tensile Strength ASTM D 4632 N (lbs) 550 (124) 550 (124) Grab Tensile Elongation ASTM D 4632 % Trapezoid Tear Strength ASTM D 4533 N (lbs) 290 (65) 290 (65) Mullen Burst Strength ASTM D 3786 kpa (psi) 2060 (300) Puncture Strength ASTM D 4833 N (lbs) 290 (65) Permittivity ASTM D 4491 sec (10) Fabric Weight ASTM D 5261 g/m 2 (oz/yd 2 ) 108 (3.2) Fabric Thickness ASTM D 5199 (mils) 0.38 (15) Post Spacing 2.5 (8.3) 3.0 (10.0) 0.9 x x 30 (3 x 100) (3 x 100) Estimated Roll Weight -- kg (lbs) 23 (50) 20 (45) DISCLAIMER: Ten Cate Nicolon warrants our products to be free from defects in material and workmanship when delivered to Ten Cate Nicolon s customers and that our products meet our published specifications. Contact your local Ten Cate Nicolon Representative for detailed product specification and warranty information. SILTFENC.DOC Revision: 4 Date: January 1, 2002
DATA FROM TRANSITION PROTOCOL MATERIALS TESTING AS OF JUNE 2013 DEMONSTRATES EVIDENCE OF FUNCTIONAL EQUIVALENCE.
DATA FROM TRANSITION PROTOCOL MATERIALS TESTING AS OF JUNE 13 DEMONSTRATES EVIDENCE OF FUNCTIONAL EQUIVALENCE. 73B Transition Protocol Materials Basis Weight Delamination * 2. 2. 2.1 2. 2.2 2. 2.3 oz/yd
We now offer three types of snow shield fabrics and coatings to meet any need and budget requirement.
Snow Shields Your Trusted Source for Satellite Equipment PRODUCT-NUMBER-HERE We now offer three types of snow shield fabrics and coatings to meet any need and budget requirement. The first is a polyester
Geosynthetics Product & Application Quick Reference Guide
Geosynthetics Product & Application Quick Reference Guide TM Our story begins in 1953, when a catastrophic flood struck the coast of Holland. This tiny country, about the size of New Jersey, was hard hit,
Base Course Design and Construction
Part I General A. This information is to be used as a guideline in construction a dynamic aggregate base and drainage system. Project conditions may vary based on overall scope of work and location. Any
MATERIAL SPECIFICATION Manufactured Ditch Checks
MATERIAL SPECIFICATION 514. Manufactured Ditch Checks 1. SCOPE This specification covers the types of material used in various manufactured ditch check products and associated installation materials. 2.
SECTION SUBDRAINAGE
SECTION 33 46 00 SUBDRAINAGE PART 1 GENERAL 1.01 SECTION INCLUDES A. CONTRACTOR shall furnish all labor, tools, and equipment and perform all Work necessary for, or incidental to, the supply and installation
The Manitoba Water Services Board SECTION Standard Construction Specifications CONSTRUCTION OF WATERWAYS September 2013 Page 1 of 9
September 2013 Page 1 of 9 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the excavation of all materials from within the limits of drains, canals, ditches and floodways, hereinafter
GSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA USA TEL (610) FAX (610) GII GAI GCI GRI - GM22
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Rev. #4: February 18, 2016 Revision schedule on pg. 9 GRI - GM22 Standard
SECTION 8130 XR-3-PW FABRIC BAFFLE WALL SPECIFICATION
SECTION 8130 XR-3-PW FABRIC BAFFLE WALL SPECIFICATION PART 1 GENERAL 1.01 WORK INCLUDED 1.01.1 This specification covers the design, fabrication, and erection of tension-fabric baffle systems composed
GRI-GC16 Standard Specification for Prefabricated Vertical Drains (PVDs)
GRI-GC16 Standard Specification for Prefabricated Vertical Drains (PVDs) also called wick drains, or strip drains usually deployed vertically, but other orientations are sometimes used provides for rapid
1-Commercial Grade Home and Building Wrap Product Data Comparison
BUILDING BETTER PROTECTION FOR LIFE QUALITY WOVEN POLYPROPYLENE FABRICS SINCE 1994 Tech Wrap Residential and Commercial Building Wrap Description Tech Wrap Home and Commercial Building Wrap consists of
GEOSYNTHETICS FOR CIVIL ENGINEERING APPLICATIONS
GEOSYNTHETICS FOR CIVIL ENGINEERING APPLICATIONS NON-WOVEN AND WOVEN GEOTEXTILE SAMPLES Model 200 Model 855 Armtec 200 Non-Woven Armtec 855 Woven ENGINEERED GEOSYNTHETIC SAMPLES FW402 HP370 Mirafi Filter
INSTALLATION AND ENGINEERING MANUAL
INSTALLATION AND ENGINEERING MANUAL INSTALLATION AND ENGINEERING MANUAL TABLE OF CONTENTS Introduction... 3 Pre-Construction Details... 3 Safety...3 Drainage...3 Base Pad...3 Disclaimer...3 Block Specifications...
E. Section Polymer Modified Cement Waterproofing. K. Section Sub drainage: Foundation perimeter drainage.
DELTA -DRAIN 6200 Section 07 10 00 Dampproofing and Waterproofing PART 1 GENERAL 1.1 SECTION INCLUDES A. Below grade waterproofing. B. Below grade drainage sheets. C. Plaza deck and planter drainage sheets.
CITY OF FARGO SPECIFICATIONS GEOTEXTILES AND GEOGRIDS
GEOTEXTILES AND GEOGRIDS PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of all labor, material, accessories, and equipment necessary
CS-75 Water-Based Adhesive Surface Primer
CS-75 Water-Based Adhesive Surface Primer Enhances the bonding between preformed sealants and concrete surfaces aiding in the installation process. Stops water penetration of the concrete. Conveniently
Zeager Bros. Inc. Middletown, Pa / Zeager Bros. Inc. Franklin, Ky Revised Feb by JM
Product Guide Specification 32 18 16.13 Protective Playground Surfacing- Recbase Synthetic grass system only Specifier Notes: This product guide specification is written according to the Construction Specifications
Contactor & Recharger Septic Chambers
Contactor & Recharger Septic Chambers Product Booklet for CULTEC Septic Leachfield Systems The Founder of Plastic Chamber Technology www.cultec.com 1(800) 4-CULTEC CULTEC Septic Product Booklet CULTEC
INTRODUCTION. The Problem. AMERDRAIN Sheet Drain. The Solution. AKWADRAIN Strip Drain. AMERDRAIN TOTAL-DRAIN system
INTRODUCTION The Problem Since historic times, civil engineers and builders have used crushed stone (aggregate) or a combination of stone and some sort of pipe for soil drainage. While providing reasonably
DATA FROM DEVELOPMENTAL MATERIAL TESTING AS OF SEPTEMBER 2012 DEMONSTRATES EVIDENCE OF FUNCTIONAL EQUIVALENCE.
DATA FROM DEVELOPMENTAL MATERIAL TESTING AS OF SEPTEMBER 212 DEMONSTRATES EVIDENCE OF FUNCTIONAL EQUIVALENCE. 173B Materials Basis Weight Delamination 2.5 2.1 2.15 2.2 oz/yd 2 2.25 2. 2.35.3.4.5.6 /in..7.8.9
Mirafi MPV500CS with Surface Treatment
Mirafi MPV500CS with Surface Treatment Prepared by: TenCate TM Geosynthetics North America 365 South Holland Drive Pendergrass, GA 30567 Tel 706 693 2226 Fax 706 693 4400 www.tencate.com May 18, 2010 1
GEOSYNTHETICS. Geosynthetics Product & Application Specification Guide. (317)
GEOSYNTHETICS (37) 346-40 www.drainagesolutionsinc.com Geosynthetics Product & Application Specification Guide Protective & Outdoor Fabrics Aerospace Composites Armour Composites Geosynthetics Industrial
Guide Specification SECTION VEGETATED PROTECTED MEMBRANE ROOFING DRAINAGE MATS
, Inc. August 2015 PO Box 98 Springvale, Maine 04083 Toll Free 800-252-2306 Fax 207-490-2998 Website www.advancedbuildingproducts.com Email info@abp-1.com Guide Specification Specifier Notes: This guide
ADS SPECIFICATIONS TABLE OF CONTENTS
ADS, Inc. Product Specifications Specifications 1-1 ADS SPECIFICATIONS TABLE OF CONTENTS ADS N-12 ST IB Pipe Specification... 1-2 ADS N-12 WT IB Pipe Specification... 1-4 ADS N-12 Plain End Pipe Specification...
Geosynthetics Product & Application Quick Reference Guide
Geosynthetics Product & Application Quick Reference Guide Protective & Outdoor Fabrics Aerospace Composites Armour Composites Geosynthetics Industrial Fabrics Synthetic Grass TM Our story begins in 1953,
Nantasket Beach Revetment Design
Nantasket Beach Revetment Design A design concept for a stone revetment was developed for the conditions reported in the 20 May 2008 Draft Nantasket Beach Coastal Engineering Appendix. This revetment design
Foil-Faced Fiberglass Fabric 84215/9480 HT
Foil-Faced Fiberglass Fabric 84215/9480 HT Description Foil-Faced Fiberglass Fabric 84215/9480 HT has been specifically designed as shipboard lagging and jacketing material for use over insulation where
GSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA USA TEL (610) FAX (610) GII GAI GCI. GRI Test Method GM21
Geosynthetic Institute 4 Kedron Avenue Folsom, PA 133-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 5: September 1, 2016 Revision schedule on pg. 11 GRI Test Method GM21
SPECIFICATION FOR PREFABRICATED VERTICAL DRAIN
SPECIFICATION FOR PREFABRICATED VERTICAL DRAIN 1.0 GENERAL This work comprises of supply and installation of prefabricated vertical drains in accordance to the Specifications and Drawings. 2.0 MATERIALS
TENCATE MIRAFI RSi MULTIFUNCTIONAL WOVEN GEOTEXTILES
TENCATE MIRAFI RSi MULTIFUNCTIONAL WOVEN GEOTEXTILES IDEAL FOR TEMPORARY ACCESS ROADS Mirafi RSI is designed to maximise use of site -won materials in temporary roads, haul roads and site access road construction.
GRI GM30* Test Methods, Test Properties and Testing Frequency for Coated Tape Polyethylene (cpe) Barriers
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Original: May 25, 2016 GRI GM30* Standard Specification for Test Methods,
GSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA USA TEL (610) FAX (610) GII GAI GCI GRI-GCL3*
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Original - May 16, 5 Rev. #2 July 26, 2010 Rev. #3 - March 14, 2016 Rev.
6.5 oz/yd g/m 2. 35/35 lb f min. 155/155 N min. 1.5% max. each direction Adhesion - Heat Sealed Seam ASTM D751, Dielectric Weld
EXAMPLE SPECIFICATION FOR 8130 XR-5 1.01 scope of work 1.02 products 1.03 submittals 1.04 factory fabrication 1.05 inspection & testing of factory seams 1.06 certification & test reports 1.07 panel packaging
DELTA -GARDEN ROOF SYSTEM with DELTA -FLORAXX
HIGH PERFORMANCE AIR & MOISTURE BARRIERS Water Retention & Drainage Membrane for Garden Roof Systems. tainability & sus th o t ronment nvi ee Comm itte d DELTA -GARDEN ROOF SYSTEM with DELTA -FLORAXX DELTA
GRI-GT13(b) Specification Geotextile Separation for Roadways (ISO Test Method Based)
GRI-GT13(b) Specification Geotextile Separation for Roadways (ISO Test Method Based) placed between subgrade soil and an overlying aggregate layer separation prevents mixing and intrusion meant for firm
GRI-GC16 Standard Specification * Test Methods, Required Properties and Testing Frequency for Prefabricated Vertical Drains (PVDs)
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI EI GAI GRI GSI GCI GII Revision 2: July 24, 2017 Revision schedule on pg. 9 GRI-GC16 Standard
Sift-Socks Nylon Connectors
JANUARY 2018 Sift-Socks Nylon Connectors RUBBER-COATED NYLON (RCN) Very pliable soft rubber coating on a two-way nylon backing. The rubber portion of the rubber coated nylon fabric is in compliance with
GRI Test Method GM25* Test Methods, Test Properties and Testing Frequency for Reinforced Linear Low Density Polyethylene (LLDPE-R) Geomembranes
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 190331208 USA TEL (610) 58440 FAX (610) 58441 GEI GRI GSI GAI GCI GII Revision 4: December 18, 2012 Revision Schedule on Page 9 GRI Test Method GM25*
CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 220 NOVEMBER 2014 CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION TABLE OF CONTENTS 220.01 SCOPE 220.02 REFERENCES 220.03 DEFINITIONS 220.04
GRI Standard GS-15* Test Methods, Test Properties and Testing Frequency for Geocells Made From High Density Polyethylene (HDPE) Strips
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII GRI Standard GS-15* Revision 1: January 5, 2016 Standard Specification for
GRI-GCL-3 STANDARD SPECIFICATION FOR TEST METHODS, REQUIRED PROPERTIES AND TESTING FREQUENCIES OF GCLs
GRI-GCL-3 STANDARD SPECIFICATION FOR TEST METHODS, REQUIRED PROPERTIES AND TESTING FREQUENCIES OF GCLs The Geosynthetic Research Institute has developed a specification on geosynthetic clay liners (GCLs)
CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 220 NOVEMBER 2014 CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION TABLE OF CONTENTS 220.01 SCOPE 220.02 REFERENCES 220.03 DEFINITIONS 220.04
Zeager Bros. Inc. Middletown, Pa / Zeager Hardwood Co. Franklin, Ky Revised Jan by JM
Product Guide Specification 32 18 16.13 Protective Playground Surfacing Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) Format,
Medical and Pharmaceutical Packaging Styles
Aligned Test Methods and Sampling Plans for DuPont Tyvek Medical and Pharmaceutical Packaging Styles June 2017 Aligned Test Methods The Medical Packaging Transition Project (MPTP) includes manufacturing
DETERMINATION OF THE LONG-TERM PROPERTIES FOR MIRAGRID XT GEOGRIDS
DETERMINATION OF THE LONG-TERM PROPERTIES FOR MIRAGRID XT GEOGRIDS Prepared by: TenCate Geosynthetics Americas 365 South Holland Drive Pendergrass, GA 30567 Tel 706 693 2226 Fax 706 693 4400 www.tencate.com
CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 220 NOVEMBER 2012 CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION TABLE OF CONTENTS 220.01 SCOPE 220.02 REFERENCES 220.03 DEFINITIONS 220.04
GRI - GM13 Standard Specification*
Standard Specification for GRI - GM13 Standard Specification* Revision 14: January 6, 2016 Revision schedule on pg. 11 Test Methods, Test Properties and Testing Frequency for High Density Polyethylene
CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 220 NOVEMBER 2007 CONSTRUCTION SPECIFICATION FOR WICK DRAIN INSTALLATION TABLE OF CONTENTS 220.01 SCOPE 220.02 REFERENCES 220.03 DEFINITIONS 220.04
GSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA USA TEL (610) FAX (610) GII GAI GCI. GRI Standard GM18*
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 190331208 USA TEL (610) 5228440 FAX (610) 5228441 GEI GRI GSI GAI GCI GII Reinstated (Revision 3): 3/20/09 Revision Schedule on pg. 10 GRI Standard GM18*
SPECIFICATIONS FOR DRAINTUBE DRAINAGE GEOCOMPOSITES
SPECIFICATIONS FOR DRAINTUBE DRAINAGE GEOCOMPOSITES The following sample specification provides guidance for preparing site-specific specifications for using Draintube as a drainage geocomposite. This
Section Soil Erosion Protection Tender No. [ ] Page 1
![Section Soil Erosion Protection Tender No. [ ] Page 1](/thumbs/76/73334137.jpg "Section Soil Erosion Protection Tender No. [ ] Page 1")
Tender No. [ ] Page 1 1.0 GENREAL 1.1 [REFERENCES].1 Provide soil erosion protection in accordance with the following standards (latest revision) except where specified otherwise..2 American Society for
GRI-GM22 GM22 Specification Reinforced Polyethylene Geomembranes for Exposed Temporary Applications
GRI-GM22 GM22 Specification Reinforced Polyethylene Geomembranes for Exposed Temporary Applications targeted lifetime is 5-105 years 20, 12, 8 mil (0.50, 0.30, 0.20 mm) thickness classes silent on method
DATA SHEET CARBON FABRIC
CARBON FABRIC Carbon fiber, also referred to as graphite fiber, is one of the strongest and stiffest reinforcements available. When properly engineered, carbon fiber advanced composites can achieve the
SECTION EROSION CONTROL MATTINGS AND COMPONENTS
SECTION 02375 EROSION CONTROL MATTINGS AND COMPONENTS PART 1 GENERAL 1.01 SUMMARY A. This section addresses erosion control blankets, erosion control revegetation matting, turf reinforcement matting, and
DETAIL SPECIFICATION EXPEDITIONARY BARRIER SYSTEM (EBS)
INCH-POUND 15 January 2014 DETAIL SPECIFICATION EXPEDITIONARY BARRIER SYSTEM (EBS) This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope.
SECTION EARTHWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 310000 - EARTHWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Modification to General Conditions and Division 01 Specification
* Please use and submit the revised product specifications and revised price proposal with your bid submission.
CARLOS PABELLON Director of Administration COUNTY OF DANE DEPARTMENT OF ADMINISTRATION PURCHASING DIVISION Room 425 City-County Building 210 Martin Luther King Jr. Blvd. Madison, WI 53703-3345 608-266-4131
WATERPROOFING. MiraPLY -V with SeamLOCK Technology SCIENCE. SERVICE. SOLUTIONS. Standards. Description. Typical Properties.
Description MiraPLY-V with SeamLOCK Technology is a nominal 70 mil vertical grade, self-adhering, blindside waterproofi ng membrane. This membrane is a fully adhered composite comprised of a tough, durable
Critical Cover Microbreathe Garments
2 Critical Cover Microbreathe Garments Critical Cover Microbreathe Garments Suitable for Use in Controlled Environments Features & Benefits: Choose Microbreathe garments for their outstanding protection,
S OZ. WOVEN POLYETHYLENE F. R. S-3 KLEAR SPAN FR S-6 18 OZ. VINYL COATED POLYESTER (VCP) INNOVATIVE SOLUTIONS PRECISION RELIABILITY
S-2 5.6 OZ. WOVEN POLYETHYLENE F. R. A 1000 denier tape woven into a fabric and coated 2.2 mil on both sides. An economic, light weight yet durable material for industrial applications for indoor use only.
SYNTHETIC TURF SYSTEMS Artificial Turf Perfect Putt
PART 1 GENERAL 1. WORK A. Furnishing, delivery, installation and warranty of a complete synthetic turf system including drainage, synthetic turf, and resilient infill material. 2. RELATED SECTIONS A. Section
SECTION SUBSURFACE DRAINAGE (Vertical applications)
SECTION 02620 SUBSURFACE DRAINAGE (Vertical applications) PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Prefabricated Sheet Drainage System as a hydrostatic water relief system {NOTE TO SPECIFIER: Edit
QUALITY STANDARDS MANUFACTURE, PRE-ASSEMBLY, AND INSTALLATION GEOMEMBRANES WATERSAVER COMPANY, INC.
QUALITY STANDARDS MANUFACTURE, PRE-ASSEMBLY, AND INSTALLATION OF GEOMEMBRANES 2009 WATERSAVER COMPANY, INC. P.O. Box 16465 PH: (800) 525-2424 Denver, CO 80216-0465 (303) 289-1818 FX: (303) 287-3136 www.watersaver.com
CHEMFAB PARTNER FOR PERFORMANCE
CHEMFAB PARTNER FOR PERFORMANCE The World of Saint-Gobain The worldwide leader for Habitat and Industrial markets, for over 350 years Saint-Gobain designs, manufactures and distributes materials and solutions
DETERMINATION OF THE LONG TERM PROPERTIES FOR MIRAFI PET-SERIES REINFORCEMENT GEOTEXTILES BY GRI-GT7 AND NCMA GUIDELINES
DETERMINATION OF THE LONG TERM PROPERTIES FOR MIRAFI PET-SERIES REINFORCEMENT GEOTEXTILES BY GRI-GT7 AND NCMA GUIDELINES Prepared by: TenCate TM Geosynthetics North America 365 South Holland Drive Pendergrass,
Appendix D Recommended Materials
Appendix D Recommended Materials Numerous BMPs in this manual have similar material needs. These BMPs are listed in the table below. Detailed information on each material requirement follows. In addition,
This silt fence system is composed of geotextile filter fabric and steel posts.
Supplemental Technical Specification for SILT FENCE SYSTEMS SCDOT Designation: SC-M-815-2 (03/08) 1.0 Silt Fence Systems This Supplemental Specification replaces Sections 815.2.5 and 815.4.6, Silt Fences,
RFQ ADDENDUM #5. Request for Qualifications #KY Kayenta Township Community Development Department
RFQ Request for Qualifications #KY-17-007-01 Kayenta Township Community Development Department 928.697.8451 NOTE: Attach to Original RFQ. However, if Proposal has already been returned, complete this amendment
This silt fence system is composed of geotextile filter fabric and steel posts.
Supplemental Technical Specification for SILT FENCE SYSTEMS SCDOT Designation: SC-M-815-2 (7/18) 1.0 Silt Fence Systems This Supplemental Specification replaces Sections 815.2.5 and 815.4.6, Silt Fences,
Master Specification SECTION GREEN ROOF DRAINAGE LAYER. Date: 22MAY07
Master Specification 33 46 23.19.1-1 SECTION 33 46 23.19.1 GREEN ROOF DRAINAGE LAYER Date: 22MAY07 PART 1 GENERAL 1.01 SUMMARY A. This specification describes the J-DRain GRS, Green Roof System and/or
SECTION WINDOW FILM. A. Section Windows; windows to receive architectural window film.
SECTION 08870 WINDOW FILM PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and security films. 1.2 RELATED SECTIONS A. Section 08500 - Windows; windows to receive architectural window film. B. Section 08600
GEOWEB CELLULAR CONFINEMENT SYSTEM V-SERIES MATERIAL SPECIFICATION
PRESTO PRODUCTS COMPANY, P.O. BOX 2399, APPLETON, WISCONSIN, USA 54912-2399 Telephone: 920-738-1118 or 800-548-3424 - Fax: 920-738-1222 e-mail: info@prestogeo.com www.prestogeo.com/ CD-8 Effective Date:27-Apr-04
Section EROSION CONTROL LINING SYSTEM SPECIFICATION ARTICULATING BLOCK AB300LL FABRIC FORMED CONCRETE
Section EROSION CONTROL LINING SYSTEM SPECIFICATION ARTICULATING BLOCK AB300LL FABRIC FORMED CONCRETE PART 1.0: GENERAL 1.1 Scope of Work The work shall consist of furnish all labor, materials, equipment,
3M Bumpon Protective Products
Technical Data July 2015 3M Bumpon Protective Products Resilient Rollstock - Clear Series SJ5600 Product Description 3M Bumpon Protective Product SJ5600 series are resilient 70 durometer clear polyurethane
WATERPROOFING SYSTEM
WATERPROOFING & BUILDING PRODUCTS COMMERCIAL PRODUCT Waterproofing Membrane Multiple Drainage Board options Mar-flex 12" DrainAway GeoDrain Tile Mar-flex Silt Cover SPRAY APPLIED FOUNDATION WATERPROOFING
AVM Drain Board 2000/2020
TECH DATA SHEET Sections - 334600 / 334613 / 334616 / 334619 / 334633 AVM Drain Board 2000/2020 Sections 334600 / 334613 / 334616 / 334619 / 334633 Product Name AVM Drain Board 2000 / 2020 Manufactured
SKAPS Industries.
SKAPS INDUSTRIES 335 Athena Drive Athens, Georgia 30601 Phone: (706) 354 3700 Fax: (706) 354 3737 E Mail: contact@skaps.com MANUFACTURING GEOTEXTILES: QUALITY MANUAL @Copyright 2016 SKAPS Industries www.skaps.com
C. G. CASH Principal and Vice President, Simpson Gumpertz & Heger Inc., consulting engineers and building pathologists, Arlington, Massachusetts, USA
COMPARATIVE TESTING AND RATING OF THIRTEEN THERMOPLASTIC SINGLE PLY ROOFING MEMBRANES Thermoplastic single ply roofing membranes C. G. CASH Principal and Vice President, Simpson Gumpertz & Heger Inc.,
Evaluation Report CCMC R DMX Drain 5M (Drainage)
CONSTRUCTION Evaluation Report CCMC 13568-R DMX Drain 5M (Drainage) MASTERFORMAT: 33 46 23.01 Evaluation issued: 2013-05-09 Re-evaluation due: 2016-05-09 1. Opinion It is the opinion of the Canadian Construction
GRI Test Method GM13* Test Methods, Test Properties and Testing Frequency for High Density Polyethylene (HDPE) Smooth and Textured Geomembranes
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 190331208 USA TEL (610) 5228440 FAX (610) 5228441 GEI GRI GSI GAI GCI GII GRI Test Method GM13* Revision 9: June 1, 2009 Revision schedule on pg. 11
Geosynthetic Research Institute. 475 Kedron Avenue Folsom, PA USA TEL (610) FAX (610) GRI Test Method GM13*
Drexel U N I V E R S I T Y Standard Specification for Geosynthetic Research Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GRI Test Method GM13* GEI GAI GRI
PRODUCT DATA SHEET. SikaProof A
PRODUCT DATA SHEET FULLY BONDED FPO SHEET MEMBRANE WATERPROOFING SYSTEM FOR BASEMENT AND OTHER BELOW GROUND STRUCTURES (ONLY TO BE APPLIED BY A SIKA APPROVED CONTRACTOR) PRODUCT DESCRIPTION SikaProof A
QUALITY STANDARDS MANUFACTURE, PRE-ASSEMBLY, AND INSTALLATION GEOMEMBRANES WATERSAVER COMPANY, INC.
QUALITY STANDARDS MANUFACTURE, PRE-ASSEMBLY, AND INSTALLATION OF GEOMEMBRANES 2009 WATERSAVER COMPANY, INC. P.O. Box 16465 PH: (800) 525-2424 Denver, CO 80216-0465 (303) 289-1818 FX: (303) 287-3136 www.watersaver.com
3M Bumpon Protective Products
Technical Data April 201 Resilient Rollstock - Clear Series SJ5600 Product Description M Bumpon Protective Product SJ5600 series are resilient 70 durometer clear polyurethane rollstock products utilizing
GRI - GM17 Standard Specification*
Geosynthetic Institute 475 Kedron Avenue Folsom, PA 19033-1208 USA TEL (610) 522-8440 FAX (610) 522-8441 GEI GRI GSI GAI GCI GII Revision 12: November 4, 2015 Revision schedule on pg. 12 GRI - GM17 Standard
Bid # CHILD CARE CENTER PLAYGROUND SURFACE and EQUIPMENT INSTALLATION 2016 SECTION "C" TECHNICAL SPECIFICATIONS OWNER
Bid # 16-44 CHILD CARE CENTER PLAYGROUND SURFACE and EQUIPMENT INSTALLATION 2016 SECTION "C" TECHNICAL SPECIFICATIONS OWNER Board of Trustees Middlesex County College 2600 Woodbridge Avenue P.O. Box 3050
MS ISO 7211/2:2003 ISO (E) BS 2471 BS 4736 : 1985 MS 499 BS 4407 MS ISO 1833:2003 JIS L ASTM D MS ISO
LIST OF TESTS & PRICE FOR TEXTILES & PAPER PRODUCTS Product Type of Tests Test Methods Standards/ Requirements Price/ Sample Remarks Fabric Fabric Tensile strength, N MS ISO 13934-1 ASTM D 5035 BS 2576
ROCKSHIELD FOR PIPELINE COATING PROTECTION TUFF-N-NUFF
ROCKSHIELD FOR PIPELINE COATING PROTECTION TUFF-N-NUFF Greatly Reduces Or Eliminates The Need For Costly Dig Ups To Repair The Pipeline Coating Reduces Construction Costs Over Using Select Fill Or Padding
SikaProof A. Fully bonded FPO sheet membrane waterproofing system for basements and other below ground structures. Product Description
Product Data Sheet Edition 14 Jan 2015 SikaProof A Fully bonded FPO sheet membrane waterproofing system for basements and other below ground structures Product Description Uses SikaProof A is a fully and
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS PRODUCT SPECIFICATION BUNKER PREPARATION Prior to installation of bunker liner, the Contractor shall insure that all bunker drains work properly. Drains which do not work shall be
Section EROSION CONTROL LINING SYSTEM SPECIFICATION FILTER POINT FP220 - PET FABRIC FORMED CONCRETE
Section EROSION CONTROL LINING SYSTEM SPECIFICATION FILTER POINT FP220 - PET FABRIC FORMED CONCRETE PART 1.0: GENERAL 1.1 Scope of Work The work shall consist of furnish all labor, materials, equipment,
Artificial Turf Robertson 921 Pup Turf
PART 1 GENERAL 1.01 WORK A. Furnishing, delivery, installation and warranty of a complete synthetic turf system including drainage, synthetic turf, and resilient infill material. 1.02 RELATED SECTIONS
SECTION WINDOW FILM. Display hidden notes to specifier. (Don't know how? Click Here) Copyright ARCAT, Inc. - All rights reserved
SECTION 08 87 13 WINDOW FILM Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2008-2010 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1 SECTION INCLUDES A. Safety and Security
STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL
STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL BOMBAY TEXTILE RESEARCH ASSOCIATION L.B.S.MARG, GHATKOPAR (W),MUMBAI-400086. WEB : btraindia.com e-mail : btra@vsnl.com What are Standards? Standards are published
Pup Turf Dog Park Pup Turf (921)
Pup Turf Dog Park Pup Turf (921) PART 1 GENERAL 1.01 WORK A. Furnishing, delivery, installation and warranty of a complete synthetic turf system including drainage, synthetic turf, and resilient infill
DESIGN GUIDANCE DOCUMENT DESIGN, CONSTRUCTION, AND MONITORING OF DRAINTUBE TM FOR U.S. LANDFILL APPLICATIONS
DESIGN GUIDANCE DOCUMENT DESIGN, CONSTRUCTION, AND MONITORING OF DRAINTUBE TM FOR U.S. LANDFILL APPLICATIONS Prepared for AFITEX-TEXEL inc. File No. 3651.00 March 2014 TABLE OF CONTENTS 1.0 INTRODUCTION...