N-Series: High-Temperature Connectors
|
|
- Evangeline Flynn
- 5 years ago
- Views:
Transcription
1 N-Series: High-Temperature Connectors
2 DIMENSIONS NMHT I/O Cable (Male) NMHT interconnects are used in hightemperature applications. These rugged cable connectors come with a variety of termination, hardware and wiring options. Custom lengths are available on wire termination products. ORDER FORM Sample Part Number Format: NMHT JCAC NMHT SERIES Metal I/O Connector (Male) ROWS 2 2-Row (9-69 contacts) BODY STYLE 1 Plug, straight 5 Plug, straight with factoryinstalled back BODY MATERIAL 2 Liquid crystal electroless nickel 4 Liquid crystal stainless steel SIZE Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts PLATING 1 50 µ Au contacts CONTACT/TERMINATION TYPE 16 Pin, straight, crimped wire WIRING XX See Wiring Codes HARDWARE 00 No hardware JC Turning jackscrews, captivated #0-80 UNF* TH Threaded hole #0-80 UNF* NOTES * hex key (#0-80 thread) Recommended torque value: 1.0 inch-lbs max (#0-80 thread) Ball end hex wrench not recommended Hex wrench key/bit conforming to the requirements of ASME/ANSI B-18.3 is recommended hex L-key long arm wrench: order AirBorn part #CDG14148 MATERIALS and FINISHES Pins:...BeCu alloy strip per ASTM B194 Contact Finish:... Gold plate per ASTM B488, SAE AMS-2422 Shell: Aluminum with electroless nickel per SAE AMS-C-26074, or 303 stainless steel per ASTM A581/A581M or ASTM A582/ A582M, passivated per SAE AMS-2700 Molded Insulators: High-temp thermoplastic Embedment: High-temp epoxy Hardware:...Corrosion-resistant steel per ASTM A582/A582M, passivated per ASTM A967, SAE AMS-QQ-P-35 Tolerances (unless otherwise specified): Angles: ±2 Decimals: ±0.005 Wire lengths insulated/stranded: +1.0 /-0.0 uninsulated/solid: +0.2 /-0.0 NOTE: AirBorn can manufacture special configurations to your exact specifications. NMHT JCAC PERFORMANCE Contact Rating: ampere maximum Solderability:...Terminals (except crimp) tested per MIL-STD-202, Method 28 Wire Size:... Stranded #30 & #32 AWG or solid #30 AWG standard (consult factory for other sizes and types) Test Voltage: V, RMS, 60Hz Operating Temperature: C to 205 C Insulation Resistance ,000 megohms 100 VDC Durability: connector mating cycles Vibration:...Tested per MIL-STD-1344, Method 2005, Cond. IV Shock: Tested per MIL-STD-1344, Method 2004, Cond. G Salt Spray:...Tested (mated) per MIL-STD-1344, Method 1001, Cond. B Humidity:...Tested (mated) per MIL-STD-1344, Method 1002, Type II (except steps 7a and 7b) Thermal Shock:... Tested to temperature extremes of MIL-STD-1344, Method 1003, Cond. A (except step 3, temperature shall be 125 C) Contact Resistance: V max drop at 1.0 amps (0.022 ohms) Contact Engaging Force: ounce max with minimum diameter test sleeve Contact Separating Force: ounce min with minimum diameter test sleeve Crimp Strength: pound min tensile strength 3-Tine Spring Member, Crimp (PIN) NMHTM-PNB-1K (CTN018)
3 NMHT MALE DRAWINGS Straight Multi-Row Cable-to-Cable NMHTM-DIM-1J (CTN017)
4 DIMENSIONS NMHT I/O Cable (Female) NMHT interconnects are used in hightemperature applications. These rugged cable connectors come with a variety of termination, hardware and wiring options. Custom lengths are available on wire termination products. ORDER FORM Sample Part Number Format: NMHT JCAC NMHT SERIES Metal I/O Connector (Female) ROWS 2 2-Row (9-69 contacts) BODY STYLE 2 Receptacle, straight 6 Receptacle, straight with factoryinstalled back BODY MATERIAL 2 Liquid crystal electroless nickel 4 Liquid crystal stainless steel SIZE Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts PLATING 1 50 µ Au contacts CONTACT/TERMINATION TYPE 26 Socket, straight, crimped wire WIRING XX See Wiring Codes HARDWARE 00 No hardware JC Turning jackscrews, captivated #0-80 UNF* TH Threaded hole, #0-80 UNF* NOTES * hex key (#0-80 thread) Recommended torque value: 1.0 inch-lbs max (#0-80 thread) Ball end hex wrench not recommended Hex wrench key/bit conforming to the requirements of ASME/ANSI B-18.3 is recommended hex L-key long arm wrench: order AirBorn part #CDG14148 MATERIALS and FINISHES Sockets:... BeCu per ASTM B194, or NiAg per ASTM B194 Contact Finish:... Gold plate per ASTM B488, SAE AMS-2422 Shell: Aluminum with electroless nickel per SAE AMS-C-26074, or 303 stainless steel per ASTM A581/A581M or ASTM A582/ A582M, passivated per SAE AMS-2700 Molded Insulators: High-temp thermoplastic Embedment: High-temp epoxy Hardware:...Corrosion-resistant steel per ASTM A582/A582M, passivated per ASTM A967, SAE AMS-QQ-P-35 Tolerances (unless otherwise specified): Angles: ±2 Decimals: ±0.005 Wire lengths insulated/stranded: +1.0 /-0.0 uninsulated/solid: +0.2 /-0.0 NOTE: AirBorn can manufacture special configurations to your exact specifications. NMHT JCAC PERFORMANCE Contact Rating: ampere maximum Solderability:...Terminals (except crimp) tested per MIL-STD-202, Method 28 Wire Size:... Stranded #30 & #32 AWG or solid #30 AWG standard (consult factory for other sizes and types) Test Voltage: V, RMS, 60Hz Operating Temperature: C to 205 C Insulation Resistance ,000 megohms 100 VDC Durability: connector mating cycles Vibration:...Tested per MIL-STD-1344, Method 2005, Cond. IV Shock: Tested per MIL-STD-1344, Method 2004, Cond. G Salt Spray:...Tested (mated) per MIL-STD-1344, Method 1001, Cond. B Humidity:...Tested (mated) per MIL-STD-1344, Method 1002, Type II (except steps 7a and 7b) Thermal Shock:... Tested to temperature extremes of MIL-STD-1344, Method 1003, Cond. A (except step 3, temperature shall be 125 C) Contact Resistance: V max drop at 1.0 amps (0.022 ohms) Contact Engaging Force: ounce max with minimum diameter test sleeve Contact Separating Force: ounce min with minimum diameter test sleeve Crimp Strength: pound min tensile strength Drawn Tube, Crimp (SOCKET) NMHTF-PNB-1J (CTN010)
5 NMHT FEMALE DRAWINGS Straight Multi-Row Cable-to-Cable NMHTF-DIM-1H (CTN009)
6 DIMENSIONS NKHT Right Angle, Board-Mount (Male) NKHT interconnects are used in high-temperature applications where a right angle, plated thru-hole termination is desired for mounting. ORDER FORM Sample Part Number Format: NKHT-2E TH00 NKHT SERIES Metal PC Board-Mounted Connector (Male) ROWS 2 2-Row (9-69 contacts) BODY STYLE E Plug, right angle, plated thru-hole BODY MATERIAL 2 Liquid crystal electroless nickel 4 Liquid crystal stainless steel SIZE Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts PLATING 3 50 µ Au contacts; Au terminations CONTACT/TERMINATION TYPE 32 Pin, right angle, x dia 33 Pin, right angle, x dia 34 Pin, right angle, x dia WIRING 00 None HARDWARE 00 No hardware TH Threaded hole #0-80 UNF* NOTES * hex key (#0-80 thread) Recommended torque value: 1.0 inch-lbs max (#0-80 thread) Ball end hex wrench not recommended Hex wrench key/bit conforming to the requirements of ASME/ANSI B-18.3 is recommended hex L-key long arm wrench: order AirBorn part #CDG14148 MATERIALS and FINISHES Pins:...BeCu alloy strip per ASTM B194 Contact Finish:... Gold plate per ASTM B488, SAE AMS-2422 Shell: Aluminum with electroless nickel per SAE AMS-C-26074, or 303 stainless steel per ASTM A581/A581M or ASTM A582/ A582M, passivated per SAE AMS-2700 Molded Insulators: High-temp thermoplastic Embedment: High-temp epoxy Hardware:...Corrosion-resistant steel per ASTM A582/A582M, passivated per ASTM A967, SAE AMS-QQ-P-35 Tolerances (unless otherwise specified): Angles: ±2 Decimals: ±0.005 Wire lengths insulated/stranded: +1.0 /-0.0 uninsulated/solid: +0.2 /-0.0 NOTE: AirBorn can manufacture special configurations to your exact specifications. NKHT-2E TH00 PERFORMANCE Contact Rating: ampere maximum Solderability:...Terminals (except crimp) tested per MIL-STD-202, Method 28 Wire Size:... Stranded #30 & #32 AWG or solid #30 AWG standard (consult factory for other sizes and types) Test Voltage: V, RMS, 60Hz Operating Temperature: C to 205 C Insulation Resistance ,000 megohms 100 VDC Durability: connector mating cycles Vibration:...Tested per MIL-STD-1344, Method 2005, Cond. IV Shock: Tested per MIL-STD-1344, Method 2004, Cond. G Salt Spray:...Tested (mated) per MIL-STD-1344, Method 1001, Cond. B Humidity:...Tested (mated) per MIL-STD-1344, Method 1002, Type II (except steps 7a and 7b) Thermal Shock:... Tested to temperature extremes of MIL-STD-1344, Method 1003, Cond. A (except step 3, temperature shall be 125 C) Contact Resistance: V max drop at 1.0 amps (0.022 ohms) Contact Engaging Force: ounce max with minimum diameter test sleeve Contact Separating Force: ounce min with minimum diameter test sleeve Crimp Strength: pound min tensile strength 3-Tine Spring Member, Crimp (PIN) NKHTM-PNB-1M (CTN022)
7 NKHT MALE DRAWINGS * OTHER LENGTHS AS REQUIRED Right Angle Board-Mount Plated Thru-Hole NKHTM-DIM-1L (CTN021)
8 Recommended PC Board Layouts NKHT Male Right Angle Plated Thru-Hole Sizes 9 31 NKHTM-PCB-1F (CTN025)
9 Recommended PC Board Layouts NKHT Male Right Angle Plated Thru-Hole Sizes NKHTM-PCB-2G (CTN034)
10 DIMENSIONS NKHT Right Angle, Board-Mount (Female) NKHT interconnects are used in high-temperature applications where a right angle, plated thru-hole termination is desired for mounting. ORDER FORM Sample Part Number Format: NKHT-2F TH00 NKHT SERIES Metal PC Board-Mounted Connector (Female) ROWS 2 2-Row (9-69 contacts) BODY STYLE F Receptacle, right angle, plated thruhole BODY MATERIAL 2 Liquid crystal electroless nickel 4 Liquid crystal stainless steel SIZE Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts Contacts PLATING 3 50 µ Au contacts; Au terminations CONTACT/TERMINATION TYPE 43 Socket, right angle, x dia 44 Socket, right angle, x dia 45 Socket, right angle, x dia WIRING 00 None HARDWARE 00 No hardware TH Threaded hole, #0-80 UNF* NOTES * hex key (#0-80 thread) Recommended torque value: 1.0 inch-lbs max (#0-80 thread) Ball end hex wrench not recommended Hex wrench key/bit conforming to the requirements of ASME/ANSI B-18.3 is recommended hex L-key long arm wrench: order AirBorn part #CDG14148 MATERIALS and FINISHES Sockets:... BeCu per ASTM B194, or NiAg per ASTM B194 Contact Finish:... Gold plate per ASTM B488, SAE AMS-2422 Shell: Aluminum with electroless nickel per SAE AMS-C-26074, or 303 stainless steel per ASTM A581/A581M or ASTM A582/ A582M, passivated per SAE AMS-2700 Molded Insulators: High-temp thermoplastic Embedment: High-temp epoxy Hardware:...Corrosion-resistant steel per ASTM A582/A582M, passivated per ASTM A967, SAE AMS-QQ-P-35 Tolerances (unless otherwise specified): Angles: ±2 Decimals: ±0.005 Wire lengths insulated/stranded: +1.0 /-0.0 uninsulated/solid: +0.2 /-0.0 NOTE: AirBorn can manufacture special configurations to your exact specifications. NKHT-2F TH00 PERFORMANCE Contact Rating: ampere maximum Solderability:...Terminals (except crimp) tested per MIL-STD-202, Method 28 Wire Size:... Stranded #30 & #32 AWG or solid #30 AWG standard (consult factory for other sizes and types) Test Voltage: V, RMS, 60Hz Operating Temperature: C to 205 C Insulation Resistance ,000 megohms 100 VDC Durability: connector mating cycles Vibration:...Tested per MIL-STD-1344, Method 2005, Cond. IV Shock: Tested per MIL-STD-1344, Method 2004, Cond. G Salt Spray:...Tested (mated) per MIL-STD-1344, Method 1001, Cond. B Humidity:...Tested (mated) per MIL-STD-1344, Method 1002, Type II (except steps 7a and 7b) Thermal Shock:... Tested to temperature extremes of MIL-STD-1344, Method 1003, Cond. A (except step 3, temperature shall be 125 C) Contact Resistance: V max drop at 1.0 amps (0.022 ohms) Contact Engaging Force: ounce max with minimum diameter test sleeve Contact Separating Force: ounce min with minimum diameter test sleeve Crimp Strength: pound min tensile strength Drawn Tube, Crimp (SOCKET) NKHTF-PNB-1L (CTN024)
11 NKHT FEMALE DRAWINGS * OTHER LENGTHS AS REQUIRED Right Angle Board-Mount Plated Thru-Hole NKHTF-DIM-1L (CTN023)
12 Recommended PC Board Layouts NKHT Female Right Angle Plated Thru-Hole Sizes 9 31 NKHTF-PCB-1F (CTN026)
13 Recommended PC Board Layouts NKHT Female Right Angle Plated Thru-Hole Sizes NKHTF-PCB-2G (CTN035)
14 WIRE S N-Series NOTES * Color coding in accordance with MIL-STD-681, System I, except using ten solid colors, only, in repeating sequence Option is not RoHS-compliant NEMA HP3 has replaced MIL-W-16878/6 TFE 7-strand ET Consult factory for other available wire types N-WIR-1G (CTN033)
.050" 4 thru 25 Contacts
.050" 4 thru 25 Contacts MM-11... MM-12... MM-12, MK-16, MK-18 receptacles MM-11, MK-15, MK-17 plugs PAGE 1 OF 4 PAGES BODY CONTACTS OPTIONS SERIES SIZE HARDWARE MM.050" Rugged Metal I/O Connector (MM
More informationsolutions HIGH DENSITY CONNECTORS Custom designed Contact arrangements
Custom designed HIGH DENSITY CONNECTORS NANO-D PITCH As the need for increased miniaturisation is becoming ever greater, AXON has developed an ultra-high density solution within the existing micro connector
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/138C 10 September 2018 SUPERSEDING MIL-DTL-55302/138C 24 March 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN, 160 CONTACT POSITIONS,
More informationSave Labor, Reduce Weight and Improve EMI Shielding with Glenair s Micro-D Shielded Cable Assemblies
Single-Ended or Double-Ended These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 00% tested and ready for use. Now With Twisted Pairs No need to create a procurement specification
More informationHS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More informationSMB Flexible Cable Connector Index
SMB Flexible Cable Connector Index Right Angle Crimp Type Bulkhead Jack... 5 Right Angle Crimp Type Plug... 3 Specifications... 2 Straight Crimp Type Bulkhead Jack... 5 Straight Crimp Type Jack... 4 Straight
More informationSMP Coaxial Connectors Update
SMP Coaxial Connectors 2005 Update SV Microwave has introduced a complete line of SMP connectors which conform to DSCC 94007, 94008 and MIL-STD-348 specifications. SMP connectors provide microwave performance
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83513/33B 13 June 2013 SUPERSEDING MIL-DTL-83513/33B 29 October 2008 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT,
More informationData Bus Connector and Terminator Requirements Document DB-1001-A. Revision C
Data Bus Connector and Terminator Requirements Document DB-1001-A Revision C 2507 W. Geneva Dr. Tempe, Arizona 85282 Phone [602] 231-8616 FAX [602] 273-9135 www.phxlogistics.com TABLE OF CONTENTS 1. Introduction
More informationDETAIL SPECIFICATION SHEET
INCH-POUND 4 May 2018 SUPERSEDING 6 March 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD
More information38999 SERIES III HIGH POWER CONNECTOR RANGE. Interconnect Solutions Worldwide
38999 III HIGH POWER CONNECTOR RANGE 38999 III HIGH POWER CONNECTOR The Polamco 38999 High Power Connector range offers a simple and effective way of terminating power cables in a harsh environment military
More informationRECTANGULAR INFINITE POSSIBILITIES. Amphenol. Rectangular and Filtered Products. Micro-D. D-Sub. Rectangular and JN1122 ARINC 404
INFINITE POSSIBILITIES. Amphenol Micro-D D-Sub Rectangular 38999 83733 and JN1122 Rectangular and Filtered Products ARINC 404 ARINC 600 AMPHENOL MICRO-D Amphenol Phoenix Interconnect Micro Connectors provide
More information2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
More informationExtended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
More informationAmphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
More informationPRODUCT SPECIFICATION
1 of 23 B 1.0 GENERAL Scope This specification covers the insulation piercing Quickie Backplane Connector System designed for Backplane-to-flat cable (round conductor) interconnection in low power applications.
More informationD-SUBMINIATURE DESCRIPTION/APPLICATION DESIGN ADVANTAGES D-SUB INDEX. IDC Systems D-Subminiature
DESCRIPTION/APPLICATION Fine Pitch D-Sub Connectors are designed for reliable interfaces in modern, high-density applications. Conforms with SCSI 2/3 internal cabling specification. The low-profile design
More informationSeries 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Series 0 Mighty Mouse Triple-Start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Three Shell Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front
More informationACT. Summary. 1 Introduction. 2 Synoptic. 3 Technical characteristics. 4 Part-numbering system. 5 Arrangements. 6 Receptacles. 7 Plug / Panel seal
Summary 1 Introduction 2 Synoptic 3 Technical characteristics 4 Part-numbering system 5 Arrangements 6 Receptacles 7 Plug / Panel seal 8 Mating and unmating dimensions 9 Mounting cutouts 10-11 Contacts
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND 18 April 2018 SUPERSEDING w/amendment 2 15 July 2016 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA, (UNCABLED), FEMALE, PRINTED CIRCUIT,
More informationD*M High Density 104 Contacts 90 Bent PCB Terminations
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with ot without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationPERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY (SERIES TNC (UNCABLED RECEPTACLES, SOCKET, JAM NUT MOUNTED, CLASS 2)
INCH-POUND 24 January 2014 SUPERSEDING MIL-PRF-39012/31C 12 September 2013 PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY (SERIES TNC (UNCABLED RECEPTACLES, SOCKET, JAM NUT MOUNTED,
More informationTip Jacks. Johnson Components P.O. Box 1732 Waseca, MN Fax:
.060" (1.5 mm) Shrouded Tip Jack (Solder or Crimp) 5.060" (1.5 mm) Uninsulated Tip Jack (Solder or Crimp) 5.060 (1.50) Shrouded Tip Jack (Solder or Crimp) 5.060 (1.50) Uninsulated Tip Jack (Solder or Crimp)
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39012/21B 20 April 2009 SUPERSEDING MIL-PRF-39012/21B 16 November 2006 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC (UNCABLED),
More informationPRODUCT SPECIFICATION
1 of 21 B 1.0 OBJECTIVE This specification defines the performance, test, quality and reliability requirements of the slotted and vertical staking header connectors. 2.0 SCOPE This specification covers
More information3Pin and Socket Connectors
AMPLIMITE Connectors Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-208 Industrial versions available that use the same manufacturing process of MIL-C-
More informationCobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE
MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RFI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising
More informationMAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
More informationFEMALE SOCKET CONNECTORS
PRODUCT DESCRIPTION The Thomas & Betts Female Socket Connectors are designed to mate with a wide variety of Male Headers in PC board applications which require repeated connection and disconnection. The
More informationSection B Micro-D Metal Shell Connectors for Harness Applications
Section Micro-D Metal Shell Connectors for pplications Micro-D product selection guide MWDM Solder Cup Connectors lways in stock, these connectors feature gold-plated solder cup contacts for termination
More informationContents B Description
Contents Description Page CONTACT TECHNOLOGY 1-12 General Technical Specifications 1 CLIPS 4 Printed Circuit Pins, Pin Connectors 5 Pin Receptacles, Sockets Contacts 8 DUAL-IN-LNE Sockets & PGA Sockets
More information3BT / 4BT Series Tiny Stat Hermetic Thermostats, -18 C to 177 C, SPST
3BT / 4BT Series Tiny Stat Hermetic Thermostats, -18 C to 177 C, SPST FEATURES Smallest snap-acting thermal switches on the market today Single Pole / Single Throw (SPST) Preset temperature set points,
More informationSMA SERIES COAXIAL CONNECTORS
General R Reference Standards MIL-PRF-3912 MIL-DTL-83517 MIL-STD-348 (Interface) IEC 6169-15 CECC 12211 Materials Bodies and nuts Contacts Insulators Gaskets Crimp ferrules Non-magnetic stainless steel
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION 108-25020 27-FEB-18 REV A INTERCONNECTION SYSTEM, AMPMODU* MOD IV, WIRE TO BOARD, STANDARD PRESSURE GOLD CONTACTS 1. SCOPE 1.1. Content This specification covers performance, tests
More informationThe UK s Leading Supplier LUMINUS
The UK s Leading Supplier LUMINUS GUIDE 2018 Description: Amphenol LTD is excited to become the UK s leading supplier of the Luminus series. The product was originally designed by our sister division Amphenol
More informationContacts for Full Duplex Ethernet Link
8D Series Twinax & Quadrax Contacts Contacts for Full Duplex Ethernet Link Twinax and Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments.
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND 1 2June 2018 SUPERSEDING MIL-C-39012/115A 3 October 1986 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES TNC (CABLED) SOCKET CONTACT, JAM
More informationB.0. Multipin Connector. Introduction
B.0 Multipin Connector Introduction Description CeramTec s multipin connector category of products describes hermetic feedthroughs of two or more conducting pins that accept plugs on the air side. Some
More informationDETAIL SPECIFICATION CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW GENERAL SPECIFICATION FOR
INCH-POUND MIL-DTL-28804D 16 August 2017 SUPERSEDING MIL-DTL-28804D w/amendment 1 7 December 1999 DETAIL SPECIFICATION CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: USB3.1 Connector Product Specification GSB4X series A / B type, Receptacle, Thru hole, PCB mount Revisions Control Rev.
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 8
Amphenol Amphenol Taiwan Corporation Sheet 1 of 8 Title: Part Number: Description: Micro Power Plus Product Specification G88MP Series 3.0 mm Pitch, PCB Mount / Cable Crimping Type Revisions Control Rev.
More informationPhoto. JBX Push Pull Sealed IP68 (Mated) The Solution for both Outdoor and Indoor waterproof applications. Secure for Outdoor applications.
Photo Environmentally Integrated Backshell Sealed Fire JBX proof onnector The Solution for both Outdoor and Indoor waterproof applications Secure for Outdoor applications Waterproof, IP68 (Mated) Reliable
More information3M Eurosocket Type C (Rows A & C, A & B or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 1.0 SCOPE This Product Specification covers the 3.96 mm (.156 inch) centerline
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
INCH-POUND MIL-DTL-83513/5H 3 April 2012 SUPERSEDING w/amendment 2 21 January 2010 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE This specification is
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
INCH-POUND MIL-DTL-83513/5H 3 April 2012 SUPERSEDING w/amendment 2 21 January 2010 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE This specification is
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More informationDETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
INCH-POUND 22 March 2007 SUPERSEDING MIL-DTL-83513E 29 May 2002 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR This specification is
More information2M801 2M803 2M804 2M805. Type Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread # of Contacts 1 to to 55 1 to 55 1 to 130
M Series SMALLER, LIGHTER-WEIGHT ALTERTIVE FOR D8 PERFORMANCE M SERIES Amphenol M micro-miniature connectors are a small, lightweight option for mil-spec performance that can withstand harsh environments.
More informationMIL-DTL series III
MIL-DTL-38999 series III and range extension MIL-DTL 38999 Series III Connectors and interconnect systems for harsh environments The company designs, manufactures and markets high performance interconnect
More informationDETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
INCH-POUND MIL-DTL-83513G 29 October 2008 SUPERSEDING MIL-DTL-83513F 22 March 2007 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR This
More informationDETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
INCH-POUND 29 October 2008 SUPERSEDING MIL-DTL-83513F 22 March 2007 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR This specification
More information3M Eurosocket Type C (Rows A & C or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationSMB. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
SMB Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
More information3M Pak Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing
More informationPrecision SMA. Key Features. Military grade. Rugged stainless steel design. Intermateable with all SMAs to Mil-C Frequency range DC to 18 GHz
Key Features Military grade Rugged stainless steel design ntermateable with all SMAs to Mil-C-39012 Frequency range DC to 18 GHz Cannon s precision SMA connectors feature the ML-C-39012 Series SMA interface
More informationPERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-31031/41 10 March 2008 PERFORMANCE SPECIFICATION SHEET CONNECTOR, ELECTRICAL, RECEPTACLE, RADIO FREQUENCY, HIGH RELIABILITY, COAXIAL, SERIES BMZ, CONTACT, FOR FLEXIBLE CABLE This specification
More informationDETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
INCH-POUND MS51524C 15 November 2017 SUPERSEDING MS51524B 17 March 2016 DETAIL SPECIFICATION SHEET TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED Reactivated after 15 November 2017 and may be
More information3M Eurosocket Type C (Rows A & C, A & B or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationMIL-DTL-3655/16B w/amendment 2 18 March 2008 SUPERSEDING AMENDMENT 1 1 November 1999 DETAIL SPECIFICATION SHEET
INCH POUND MIL-DTL-3655/16B 18 March 2008 SUPERSEDING AMENDMENT 1 1 November 1999 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, CLASS I (COAXIAL, SERIES TWIN, TWBNC) This specification
More informationAmphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
More informationA new lightweight version!
8STA A new lightweight version! In-line receptacle Benefits Weight saving Elimination of knurl ost Saving for end customer Elimination of secondary machining process for customers who modify standard flange
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.m.com/ interconnects
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. .100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with
More information3M MetPak 2-FB Socket
M MetPak 2-FB Socket End-to-end stackable Offset dual-beam contact minimizes insertion force Molded guide fingers provide integrated alignment Alignment wafer for true position Mates with MP2-P inverse
More informationDETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
INCH-POUND 13 April 2011 SUPERSEDING w/amendment 1 4 August 2008 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR This specification is
More informationPEGASUS SERIES GUIDE Amphenol Pcd
GUIDE 2018 Amphenol Pcd Description: The Pegasus Series is Amphenol PCD s latest innovation in small, lightweight, rugged connectors. Designed for use in harsh environments, Pegasus builds on the successful
More informationDETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, CLASS I (COAXIAL, SERIES TWIN, TWTNC, JAM NUT MOUNTED)
INCH POUND MIL-DTL-3655/13B 18 March 2008 SUPERSEDING MIL-DTL-3655/13B 4 October 1999 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, CLASS I (COAXIAL, SERIES TWIN, TWTNC, JAM NUT MOUNTED)
More information3M PCB Connector.100 Four Row 3400 Series
PCB Connector.00 Four Row 300 Series Low profile Standard staggered grid Variety of pin lengths and plating options available See Regulatory Information Appendix (RIA) for chemical compliance information
More informationMar11 Rev A
Product Specification 108-1472 11Mar11 Rev A Connector, Short Point Receptacle Contact 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for TE Connectivity (TE)
More informationD*MA Connectors
3401-002 D*MA Connectors Features/Benefits D*Sub Connector type Removable Contacts technology Standard and High Density available From 9 to 104 ways ESCC Specification. Reference 3401002 Typical Applications
More information3M MetPak 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series
M MetPak 2-FB Socket End-to-end stackable Offset dual-beam contact minimizes insertion force Expanded pin counts Protective Push-Cap Monoblockable Press or heat stake peg 12 mm modular units Meets global
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 6
Amphenol Amphenol Taiwan Corporation Sheet 1 of 6 Title: Part Number: Description: Mini SAS HD Integrated Connector Product Specification G40H series Mini SAS HD Integrated Connector, 0.75 Pitch, R/A,
More informationHigh Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.mconnectors.com
More informationMIL-DTL-3655/15B w/amendment 2 18 March 2008 SUPERSEDING AMENDMENT 1 1 November 1999 DETAIL SPECIFICATION SHEET
INCH POUND MIL-DTL-3655/15B 18 March 2008 SUPERSEDING AMENDMENT 1 1 November 1999 DETAIL SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, CLASS I (COAXIAL, SERIES TWIN, TWBNC) This specification is approved
More information3M Four-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Four-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M s 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing
More informationCannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
More informationheavy mate D Rated voltage 250 V Rated current 10 A A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128
heavy mate D Rated voltage 250 V Rated current 10 A... 16 A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128 22 heavy mate D Brief information Approvals, Testhouse Characteristics Approval-Number
More informationDETAIL SPECIFICATION CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR
INCH-POUND MIL-DTL-24308H 1 February 2018 SUPERSEDING MIL-DTL-24308G w/amendment 5 10 August 2017 1. SCOPE DETAIL SPECIFICATION CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED
More informationSSL Series 1.2 IP X8 waterproof solution. Product Data Sheet. REV. 0, 2014 August
SSL Series 1.2 IP X8 waterproof solution Product Data Sheet REV. 0, 2014 August General Specification Number of Positions Current Rating Wire Information Voltage Rating Dielectric Withstand Voltage Durability
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Surface mount compatible PCT insulator
More informationPhysical. Electrical. Environmental
M MetPak 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder MP2 Series Three levels of early mate, late break (EMLB) sequencing or selective loading options Footprint compatible with standard Futurebus+
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
More informationPump Specifications 450 Series 1/2 hp Submersible Sump Pump
Pump Specifications 450 Series 1/2 hp Submersible Sump Pump 450_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 450-Series Dimensional
More informationDETAIL SPECIFICATION CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
INCH - POUND MIL-DTL-55302G 18 July 2017 SUPERSEDING MIL-DTL-55302G w/amendment 2 16 November 2015 1. SCOPE DETAIL SPECIFICATION CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES This specification
More informationDETAIL SPECIFICATION CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS GENERAL SPECIFICATION FOR
INCH-POUND 4 August 2017 SUPERSEDING w/amendment 1 11 April 2012 DETAIL SPECIFICATION CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS GENERAL SPECIFICATION
More informationDETAIL SPECIFICATION SHEET POWER DIVIDERS, N-WAY, 0 DEGREES, FLAT PACK
INCH-POUND MIL-DTL-23971/5D 23 April 2013 SUPERSEDING MIL-DTL-23971/5C 14 May 2007 DETAIL SPECIFICATION SHEET POWER DIVIDERS, N-WAY, 0 DEGREES, FLAT PACK This specification is approved for use by all Departments
More informationOverall Length
CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3004 DRAWING TITLE: ASC2 to SBC(ASC2) I2C Control Cable DRAWING
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of PC board space Mates with boardmount and
More information3M 4-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing header to board RoHS* compliant Optional polarizing posts High temperature insulator
More information3M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug
M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug 61 Series Robust ribbon style contact for reliable, repetitive plugging Body tabs provide lateral support to solder joints and help
More informationCOSMTEC. SMA Female to N Female Adapter. RF Connector Technical Data Sheet S-024. Description Minimum Typical Maximum Units
Configuration SMA Female Connectr 1 N Female Connectr 2 50 Ohms SMA Female to N Female Adapter S-024 Features Max VSWR of 1.3:1 up to 18 GHz SMA Interface compliant with MIL-STD-348A N Interface compliant
More informationMar11 Rev D
Product Specification 108-1836 11Mar11 Rev D 3 mm Micro MATE-N-LOK* Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the 3 mm Micro MATE-N- LOK*
More informationDETAIL SPECIFICATION CONNECTORS, ELECTRICAL, MODULAR, AND COMPONENT PARTS GENERAL SPECIFICATION FOR
INCH-POUND 3 May 2016 SUPERSEDING MIL-C-2875D 21 APRIL 1989 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, MODULAR, AND COMPONENT PARTS GENERAL SPECIFICATION FOR This specification is approved for use by
More informationThe extreme environments interconnect specialist «from deep sea to deep space»
The extreme environments interconnect specialist «from deep sea to deep space» The company designs, manufactures and markets high performance interconnect solutions for severe environments from industrial
More informationDETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
INCH-POUND MIL-DTL-83513G 3 August 2017 SUPERSEDING MIL-DTL-83513G w/amendment 2 28 July 2015 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION
More information