No. KA/2012/31622A-02 Date 2012/04/11 Page 2 of 6 Test Result(s) PART NAME No.1 Test Item(s) Cadmium (Cd) Lead (Pb) Mercury (Hg) Sum of PBBs Monobromo

Transcription

1 No. KA/2012/31622A-02 Date 2012/04/11 Page 1 of 6 The following sample(s) was/were submitted and identified by/on behalf of the client as Sample Description Part No. Country of Orgin Job No. Sample Receiving Date Testing Period Sample Submitted By PAPER BOARD D-LITE INDONESIA JKT-ML/HG/03/12/ /03/ /03/26 TO 2012/04/11 P.T. SGS INDONESIA ============================================================================================ Test Requested As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI), PPBs,PBDEs contents in the submitted sample. As specified by client, with reference to Directive 94/62/EC and Toxics in Packaging Clearinghouse to determine Cadmium, Lead, Mercury and Hexavalent Chromium contents in the submitted sample. Test Result(s) Please refer to next page(s). Conclusion Based on the performed tests on submitted samples, the test results of Cadmium, Lead, Mercury, Cr(VI), PPBs,PBDEs comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC. Based on the performed tests on submitted samples, the test results of Cadmium, Lead, Mercury, Cr(VI) comply with the limits of Directive 94/62/EC and Toxics in Packaging Clearinghouse. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//

2 No. KA/2012/31622A-02 Date 2012/04/11 Page 2 of 6 Test Result(s) PART NAME No.1 Test Item(s) Cadmium (Cd) Lead (Pb) Mercury (Hg) Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether WHITE/GRAY PAPER BOARD Unit Method With reference to IEC and With reference to IEC and With reference to IEC and With reference to IEC and performed by UV-VIS. MDL Result No.1 Limit 2 n.d n.d n.d n.d With reference to IEC and 5 n.d. - performed by GC/MS. - n.d This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//

3 No. KA/2012/31622A-02 Date 2012/04/11 Page 3 of 6 Result Test Item(s) Unit Method MDL Limit No.1 94/62/EC (Heavy metal content) Cadmium (Cd) Lead (Pb) Mercury (Hg) Total Cadmium + Lead + Mercury + Hexavalent Chromium Cr(VI) TPCH (Heavy metal content) Cadmium (Cd) Lead (Pb) Mercury (Hg) With reference to IEC and With reference to IEC and With reference to IEC and With reference to IEC and performed by UV-VIS. Total Cadmium + Lead + Mercury + (94/62/EC) Total Cadmium + Lead + Mercury + Hexavalent Chromium Cr(VI) Note 1. = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. " - " = Not Regulated 5. With reference to IEC and With reference to IEC and With reference to IEC and With reference to IEC and performed by UV-VIS. Total Cadmium + Lead + Mercury + (TPCH) 5. This report supersedes all previous documents bearing the test report number KA/201X/XXXXX This is the additional test report of KA/2012/31622 which was issued on 2012/04/11. Please refer to KA/2012/31622 for original information. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//

4 No. KA/2012/31622A-02 Date 2012/04/11 Page 4 of 6 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr 6+ test method excluded) 2) Name of the person who made measurement Alex Chang 3) Name of the person in charge of measurement Ray Chang Cutting / Preparation Sample Measurement Pb Cd Acid digestion by suitable acid depended on different sample material (as below table) Hg Microwave digestion with HNO 3 /HCl/HF Cr 6+ Add appropriate amount of digestion reagent Solution Filtration Residue 1) Alkali Fusion 2) HCl to dissolve Heat to appropriate temperature to extract Cool, filter digestate through filter Sample Material ICP-AES Digestion Acid Add diphenyl-carbazide for color development Steel, copper, aluminum, solder Aqua regia, HNO 3, HCl, HF, H 2 O 2 Glass HNO 3 /HF Gold, platinum, palladium, ceramic Aqua regia measure the absorbance at 540 nm by UV-VIS Silver HNO 3 Plastic Others H 2 SO 4, H 2 O 2, HNO 3, HCl Any acid to total digestion This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//

5 No. KA/2012/31622A-02 Date 2012/04/11 Page 5 of 6 PBB/PBDE analytical FLOW CHART 1) Name of the person who made measurement Anson Tsao 2) Name of the person in charge of measurement Ray Chang First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction/ Soxhlet method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//

6 No. KA/2012/31622A-02 Date 2012/04/11 Page 6 of 6 * The tested sample / part is marked by an arrow if it's shown on the photo. * ** End of Report ** This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http//