Water welding machine and accessories

Size: px

Start display at page:

Download "Water welding machine and accessories"

Silas Warner
5 years ago
Views:

Water welding machine and accessories Water welding machine

oxygen gas. These two gases become water after burning.

size Packing Weight Water welding machine- head M.WM.

1 Water welding machine and accessories Water welding machine Features : Apply water electrolysis method to make hydrogen gas and flame. The water meets DC then decomposes into hydrogen gas and oxygen gas. These two gases become water after burning. Efficient and energy conservation, economical and environmental protection. Description Model Voltage (AC) Phase Power input Packing size Packing Weight Water welding machine- head M.WM.B ±20V/0±0V 300 W (cm) 5 kg Water welding machine-2 head M.WM.B ±20V/0±0V 350 W (cm) 20 kg Water welding machine-3 head M.WM.B ±20V/0±0V 600 W (cm) 22 kg Water welding machine-4 head M.WM.B ±20V/0±0V 800 W (cm) 23 kg Water welding machine-6 head M.WM.B ±20V/0±0V 000 W (cm) 25 kg Water welding machine-2 head M.WM.B ±20V/0±0V 600 W (cm) 57 kg Oxyhydrogen gas torch (A, B, C, D) Water electrolysis powder Model: H.PD.0002 Purity: 99% Ratio: 500g mix 2500ml water Model: M.WM.P0002 M.WM.P0003 M.WM.P0004 M.WM.P0005 Diameter: 0.3, 0.4, 0.5, 0.6 (mm) Tel

20W desktop laser marker 50W desktop laser marker.

High-speed scanning galvanometer, high precision and speed adjustable speed. 3.

High conversion efficiency of laser, output power stability, high quality beam of

Width: 0.02mm Min Character Height: 0.2mm Repeatability: 0.

Machine Dimensions: 780x30x540mm Packing size: 870x390x740mm Machine Weight: 4Kg

5. Peripherals and on-site security guards and other precious metals gold and

Width: 0.0mm Min Character Height: 0.2mm Repeatability: 0.

to 0.0 mm Marking Speed: 7000mm/s Max Power Consumption: 800W Power Supply: AC

2 20W desktop laser marker 50W desktop laser marker. The use of air-cooled integrated laser, low power consumption, long service life. 2. High-speed scanning galvanometer, high precision and speed adjustable speed. 3. Electric focusing 3D workstation, It is convinient to use for the operator. 4. High conversion efficiency of laser, output power stability, high quality beam of laser, improve efficiency and standard lettering printed aesthetic effect. 55 Web Model: M.SW.DKL20A Laser Source: Ytterbium Fiber Laser Laser Power: 20W Laser Wave Length: 064nm Beam Quality M2: <.3 Laser Frequency: KHz Laser Lifespan: 00,000 hours (average) Min Line Width: 0.02mm Min Character Height: 0.2mm Repeatability: 0.00mm Cooling System: Build-in air cool Marking Table: Z Cutting Thickness: Up to 0.3 mm Marking Depth: Up to.0 mm Marking Speed: 7000mm/s Max Power Consumption: 800W Power Supply: AC 220V/P Machine Dimensions: 780x30x540mm Packing size: 870x390x740mm Machine Weight: 4Kg (Net Wt.) / 60Kg (Gr. Wt.) Marking Area: 00mm x 00mm (Standard) 50mm x 50mm or 50mm x 50mm (Optional). The use of air-cooled integrated laser, low power consumption, long service life. 2. High-speed scanning galvanometer, high precision and speed adjustable speed. 3. Electric focusing 3D workstation, It is convinient to use for the operator. 4. High conversion efficiency of laser, output power stability, high quality beam of laser, improve efficiency and standard lettering printed aesthetic effect. 5. Peripherals and on-site security guards and other precious metals gold and silver dust recovery system, reducing the loss of gold and silver and other precious metals. Model: M.SW.DKL50C-Z Laser Source: Ytterbium Fiber Laser Laser Power: 50W Laser Wave Length: 064nm Beam Quality M2: <.3 Laser Frequency: KHz Laser Lifespan: 00,000 hours (average) Min Line Width: 0.0mm Min Character Height: 0.2mm Repeatability: 0.00mm Cooling System: Build-in air cool Marking Table: X, Y Z Cutting Thickness: Up to 0.3 mm Marking Depth: Up to.0 mm Marking Speed: 7000mm/s Max Power Consumption: 800W Power Supply: AC 220V/50Hz Machine Dimensions: 900x460x820mm Packing size: 00x50x900mm Machine Weight: 78Kg (Net Wt.) / 0Kg (Gr. Wt.) Marking Area: 00mm x 00mm (Standard) 50mm x 50mm or 50mm x 50mm (Optional) Tel

20W standing laser marker 20W mini standing laser marker.

High conversion efficiency of laser, output power stability, high quality beam of laser, improve efficiency and

Mini laser marking machine mainly used by jewelry shop, adopt imported semiconductor chips, high beam quality,

stability.. compact dimension, low weight, easily for installation and transportation. 2.

exquisite image-text, subtle line, high resolution, wide application range, especially suitable for high

no material consumption, maintenance-free, no need to change water and lamp. 6.

simple to operate, support Windows platform, compatible with file formats: AutoCAD, Coreldraw, Photoshop, as:

DKL20C Laser Source: Ytterbium Fiber Laser Laser Power: 20W Laser Wave Length: 064nm Beam Quality M2: <.

02mm Min Character Height: 0.2mm Repeatability: 0.

0 mm Marking Speed: 7000mm/s Max Power Consumption: 800W Power Supply: AC 220V/50Hz/0A/P Machine Dimensions:

3 20W standing laser marker 20W mini standing laser marker. The use of air-cooled integrated laser, low power consumption, long service life. 2.High-speed scanning galvanometer, high precision and speed adjustable speed. 3. Electric focusing 3D workstation, It is convinient to use for the operator. 4. High conversion efficiency of laser, output power stability, high quality beam of laser, improve efficiency and standard lettering printed aesthetic effect. Mini laser marking machine mainly used by jewelry shop, adopt imported semiconductor chips, high beam quality, high laser peak power, engraving subtle line, original air-cooled laser source, fast marking speed and high stability.. compact dimension, low weight, easily for installation and transportation. 2. high efficiency, less power consumption, low cost, saving energy. 3. exquisite image-text, subtle line, high resolution, wide application range, especially suitable for high precision marking. 4. long lifetime, stability, reliability. 5. no material consumption, maintenance-free, no need to change water and lamp. 6. non-pollution, meet environmental needs. 7. simple to operate, support Windows platform, compatible with file formats: AutoCAD, Coreldraw, Photoshop, as: dxf, plt, bmp, jpg and so on. Direct use Windows system fonts. 57 Web Model: M.SW.DKL20C Laser Source: Ytterbium Fiber Laser Laser Power: 20W Laser Wave Length: 064nm Beam Quality M2: <.3 Laser Frequency: KHz Laser Lifespan: 00,000 hours (average) Min Line Width: 0.02mm Min Character Height: 0.2mm Repeatability: 0.00mm Cooling System: Build-in air cool Marking Table: X, Y Z Cutting Thickness: Up to 0.3 mm Marking Depth: Up to.0 mm Marking Speed: 7000mm/s Max Power Consumption: 800W Power Supply: AC 220V/50Hz/0A/P Machine Dimensions: 800x860x450mm Packing size: 270x60x680mm Machine Weight: 30Kg (Net Wt.) / 80Kg (Gr. Wt.) Marking Area: 00mm x 00mm (Standard) 50mm x 50mm or 50mm x 50mm (Optional) Technical parameters Model M.SW.DKLMDP6 M.SW.DKLM20M Laser type/wavelength Nd:YAG/064nm Ytterbium Fiber Laser Peak power 6W 20W M2 Beam quality <.2 <.2 Stability (r m s, 4h) <3% <3% Marking depth 0.5mm 0.5mm Laser Lifespan: 5000小时(hours) 00000小时(hours) Marking speed 7000mm/s 7000mm/s Min line width 0.0mm 0.0mm Min character height 0.mm 0.mm Power consumption 400W 800W AC 220V/50Hz AC 220V/50Hz 560x300x720mm 560x300x720mm Power supply Size Marking area 00mm x 00mm (Standard) 50mm x 50mm or 50mm x 50mm (Optional) Tel

5W carbon dioxide laser marking machine 00W laser welder machine Description : The machine is widely used for nonmetallic material marking, engraving,

Integrate cost lowly, mature technology, so widely used by kinds of processing shop and factory.

packaging, printing plate-making, shell nameplates and so on. Model: M.SW.DKCM-5W Laser Source: CO2 Laser Laser Power: 5W Laser Wave Length: 0.

mm Min Text Height: 0.4mm Repeatability: 0.

Supply: AC 220V / 50Hz Machine Dimensions: 800x860x450mm Packing size: 270x60x680mm Machine Weight: 30Kg (Net Wt.

) Single Marking Area: 00 x 00mm (Standard) 50mm x 50mm or 50mm x50mm (Optional) Applied to fill holes of gold and silver jewelry, trachoma spot welding,

It can also be used to make dentures and trachoma welding small precision parts such as batteries nickel belt, IC lead, watches gossamer, picture tube, an

Small heat affected zone during welding; welding spot size can be adjusted; solder fine, smooth, beautiful, without too much after the welding process;

4 5W carbon dioxide laser marking machine 00W laser welder machine Description : The machine is widely used for nonmetallic material marking, engraving, hollowing, cutting. Adopt high device configuration, excellent marking software. Integrate cost lowly, mature technology, so widely used by kinds of processing shop and factory. Application: Can laser mark,engrave, hollow, cut various text, symbol, graph, image, bar code, on leather, ABS, acrylic, PC, bamboo ware, paper, glass, ceramic, EP non-metallic material. It s widely used in craft gift, furniture, leather garments, advertising sign plates, model making, food packaging, electronic components, medicine packaging, printing plate-making, shell nameplates and so on. Model: M.SW.DKCM-5W Laser Source: CO2 Laser Laser Power: 5W Laser Wave Length: 0.64nm Beam Quality M2: <. Laser Frequency: 000 KHz max. (recommended to use within 0KHz) Laser Lifespan: 40,000 hours (average) Min Line Width: 0.mm Min Text Height: 0.4mm Repeatability: 0.00mm Cooling System: Build-in air cool Marking Table: X,Y and Z electric working platform Marking Speed: 7000mm / s Max Power Consumption: 500W Power Supply: AC 220V / 50Hz Machine Dimensions: 800x860x450mm Packing size: 270x60x680mm Machine Weight: 30Kg (Net Wt.) / 80Kg (Gr. Wt.) Single Marking Area: 00 x 00mm (Standard) 50mm x 50mm or 50mm x50mm (Optional) Applied to fill holes of gold and silver jewelry, trachoma spot welding, seam lines and repair parts inlaid claw feet and other parts of the welding. It can also be used to make dentures and trachoma welding small precision parts such as batteries nickel belt, IC lead, watches gossamer, picture tube, an electron gun assembly, and other fields. Small heat affected zone during welding; welding spot size can be adjusted; solder fine, smooth, beautiful, without too much after the welding process; accurate positioning; welding speed, high quality, pollution-free solder, efficient and environmentally friendly. Application: Kinds of metals. Such as: gold, silver, platinum, stainless steel, titanium and its alloys.. A key operation: a key switch, simplify the start-up process equipment, convenient for the operator to the tedious process. 2. MCU control: can store 50 groups used welding parameters, convenient use again. 3. Small volume and light weight: reduce the work space, easy to transport and move. Model: M.SW.DKLW00 Power supply: 220V/50Hz/5A/P Maximum peak power: 3.5KW Average Pulse Energy: 00W Wave Length: 064nm Pulse Frequency: 0-20Hz Pulse Length: ms Spot diameter: mm Observation rate: 0 times Working distance: 90mm Dimension (Main): 840x450x500mm Packing size: 60Kg Gross Weight: Clean, no dust and vibrate, Temp 3-28, Humidity 5%-75% With camera 59 Web Tel

200W laser welder machine 300W laser welder machine Applied to fill holes of gold and silver jewelry, trachoma spot welding, seam lines and repair parts inlaid claw feet and other

Such as: gold, silver, platinum, stainless steel, titanium and its alloys.

MCU control: can store 50 groups used welding parameters, convenient use again. 3. Small volume and light weight: reduce the work space, easy to transport and move. 6 Web www.

to fill holes of gold and silver jewelry, trachoma spot welding, seam lines and repair parts inlaid claw feet and other MCU control: can store 50 groups used welding

DKLW300 Power supply: 220V/50Hz/30A/P Maximum peak power: 7KW Average Pulse Energy: 300W Wave Length: 064nm Pulse Frequency: 0-20Hz Pulse Length: 0.-0.

5 200W laser welder machine 300W laser welder machine Applied to fill holes of gold and silver jewelry, trachoma spot welding, seam lines and repair parts inlaid claw feet and other parts of the welding. It can also be used to make dentures and trachoma welding small precision parts such as batteries nickel belt, IC lead, watches gossamer, picture tube, an electron gun assembly, and other fields. Small heat affected zone during welding; welding spot size can be adjusted; solder fine, smooth, beautiful, without too much after the welding process; accurate positioning; welding speed, high quality, pollution-free solder, efficient and environmentally friendly. Application: Kinds of metals. Such as: gold, silver, platinum, stainless steel, titanium and its alloys.. A key operation: a key switch, simplify the start-up process equipment, convenient for the operator to the tedious process. 2. MCU control: can store 50 groups used welding parameters, convenient use again. 3. Small volume and light weight: reduce the work space, easy to transport and move. 6 Web Model: M.SW.DKLW200 Power supply: 220V/50Hz/20A/P Maximum peak power: 4.5KW Average Pulse Energy: 200W Wave Length: 064nm Pulse Frequency: 0-20Hz Pulse Length: ms Spot diameter: mm Observation rate: 0 times Working distance: 90mm Dimension (Main): 840x450X500mm Packing size: 60Kg Gross Weight: Clean, no dust and vibrate, Temp 3-28, Humidity 5%-75% Applied to fill holes of gold and silver jewelry, trachoma spot welding, seam lines and repair parts inlaid claw feet and other parts of the welding. It can also be used to make dentures and trachoma welding small precision parts such as batteries nickel belt, IC lead, watches gossamer, picture tube, an electron gun assembly, and other fields. Small heat affected zone during welding; welding spot size can be adjusted; solder fine, smooth, beautiful, without too much after the welding process; accurate positioning; welding speed, high quality, pollution-free solder, efficient and environmentally friendly. Application: Kinds of metals. Such as: gold, silver, platinum, stainless steel, titanium and its alloys.. A key operation: a key switch, simplify the start-up process equipment, convenient for the operator to the tedious process. 2. MCU control: can store 50 groups used welding parameters, convenient use again. 3. Small volume and light weight: reduce the work space, easy to transport and move. Model: M.SW.DKLW300 Power supply: 220V/50Hz/30A/P Maximum peak power: 7KW Average Pulse Energy: 300W Wave Length: 064nm Pulse Frequency: 0-20Hz Pulse Length: ms Spot diameter: mm Observation rate: 0 times Working distance: 90mm Dimension (Main): 840x450x500mm Chiller's size: 60x370x620mm Packing size: 60Kg Chiller's net weight: 46Kg Gross Weight: Clean, no dust and vibrate, Temp 3-28, Humidity 5%-75% Tel

It is suitable for jewelry, dentures and trachoma and micro-precision parts such as battery nickel belt, integrated

quality,non-polluted solder joints, and efficient environmental protection.

lifetime is more than 800 million times. 2.

3. The laser head can be rotated 360 degrees, the part of laser path can move back and forth, and up and down. 4.

The table can be lifted and moved independently.

transmission, parallel light through a collimating lens, then focus onto the workpiece.

The laser beam can be achieved on time and spectral energy, capable of multi-beam processing, for more sophisticated

Mainly in supporting chain making machine automatic welding; also be used for optical communication, IT, medical,

parts of watches and clocks, automotive steel plate and other precision welding. Model: M.SW.

Frequency: -00Hz Pulse Length: 0.2-20ms Spot diameter: 0.-3.

6 63 Web 300W fiber laser welder machine It introduces German technology, uses a unique and overall structure design. It is suitable for jewelry, dentures and trachoma and micro-precision parts such as battery nickel belt, integrated circuit lead, watch hairspring, kinescope, electron gun assembly and other areas of welding; high speed welding, high quality,non-polluted solder joints, and efficient environmental protection.. It uses ceramic condenser cavity, corrosion resistance, high temperature resistance, lifetime (8-0) years, xenon lamp lifetime is more than 800 million times. 2. It uses the world's most advanced automatic shading system, eliminating the excitement to the eyes during working hours. 3. The laser head can be rotated 360 degrees, the part of laser path can move back and forth, and up and down. 4. The parameter adjustment use intelligent touch control, operate easily, fastly. 5. The table can be lifted and moved independently. Fiber laser welding machine is adopt high-energy laser beam coupled into the fiber, after the long distance transmission, parallel light through a collimating lens, then focus onto the workpiece. Welding inaccessible parts,adopt the flexible transmission non-contact welding, with greater flexibility. The laser beam can be achieved on time and spectral energy, capable of multi-beam processing, for more sophisticated welding conditions. Mainly in supporting chain making machine automatic welding; also be used for optical communication, IT, medical, electronics, batteries, fiber-coupled devices, CRT electron gun, metal parts, mobile phone vibration motor, precision parts of watches and clocks, automotive steel plate and other precision welding. Model: M.SW.DKCW300 Power supply: 220V/50Hz/30A/P Maximum peak power: 7KW Average Pulse Energy: 300W Wave Length: 064nm Pulse Frequency: -00Hz Pulse Length: ms Spot diameter: mm (manual adjustment) Observation rate: 0X CCD Working distance: 50mm Dimension (Main): 630x000x300mm Working table size: 390x360x700mm Chiller's size: 60x370x620mm Gross Weight: Clean, no dust and vibrate, Temp 3-28, Humidity 5%-75% Model: M.SW.DKFW300 Laser wavelength: 064nm Laser material: Nd:YAG Max. single pulse energy: 20J Pulse width: 0ms Pulse frequency: 20Hz Fiber core diameter: 0.4mm~0.6mm Min. spot diameter: 0.2mm Max. laser power: 300W Total power: 7KW Fiber number of output : Single fiber head Cooling system: External water cooling Power supply: 220V±5%/50Hz Measurement: 900x460x00mm Weight: 90kg Chiller's size: 60x370x620mm Chiller's net weight: 46Kg Open type 300W laser welder machine Tel

7 Other welding machine Welding tools 30 A spot welder Model : M.SW ower Supply: 220V, 50/60Hz, phase Taiwan Torch for oxygen with 5 tips Model : T.TO.T0005 Taiwan Torch made in USA Model : T.TO.A0005 Taiwan Torch for oxygen with tip Model : T.TO.T A spot welder with gauge : Suitable for platinum, gold, K gold, silver, metal, such as chain, wire connection, accurate, quick working. You can connect to argon gas protection, no need wilding powder, direct working, finished item with smooth surface and no darkness. Model : M.SW.0000 Power Supply: 220V, 50/60Hz, phase H0-20 torch for oxygen Model : T.TO.H020 White torch Model : T.TO.0000 Little white torch Model : T.TO Argon gas point soldering machine : Suitable for platinum, gold, K gold, silver, metal, such as chain, wire connection, accurate, quick working. You can connect to argon gas protection, no need wilding powder, direct working, finished item with smooth surface and no darkness. Model: M.SW Power Supply: 220V, 50/60Hz, phase White extra large torch Model : T.TO Extra large brass torch Model:T.TO Electrical torch lighter Model:T.TO Web Tel

8 Gas torch 230# (Black/Silvery) Model:T.TO Gas torch 270# Model : T.TO.0004 Gas torch 40# (Black/Silvery) Model : T.TO Electrical torch lighter Model : T.TO Piples Model : T.AB.P000 Flat nose piler Model : T.CG Welding powder Model : T.GI.00084, T.GI.0033 Layers Model : T.AB.B0006/07/08/09/0/2/ Leather air bellow kit Model : T.AB.A Web

Jewelry Laser Spot Welding Machine

Jewelry Laser Spot Welding Machine This laser spot welding machines are used for perforation and spot welding of sand hole for gold and silver jewelleries. Laser spot welding is an important application