INSTRUCTION MANUAL PHANTOM LOAD MODEL PA For SERIAL NO.
|
|
- Arlene Young
- 5 years ago
- Views:
Transcription
1 INSTRUCTION MANUAL For PHANTOM LOAD MODEL PA-305 SERIAL NO. It is essential that this instruction book be read thoroughly before putting the equipment in service.
2 IMPORTANT The information and data contained within this instruction manual are proprietary with MULTI-AMP Corporation. The equipment described herein may be protected by one or more U.S. letters patent. MULTI-AMP specifically reserves to itself all rights to such proprietary information as well as all rights under any such patent, none of which is waived by the submission of this instruction manual to anyone. The recipient, if a Government agency, acknowledges that this instruction book and the equipment described were procured with "Limited Rights" to technical data as described in ASPR (b). Copyright MULTI-AMP Corporation, 983, 988, 989, 99 TABLE OF CONTENTS
3 INTRODUCTION TO TESTING WATTHOUR METERS... Bulletin CHARTS/TABLES... SAFETY PRECAUTIONS... 4 DESCRIPTION OF CONTROLS... 5 INSTALLATION INSTRUCTIONS... 6 OPERATING INSTRUCTIONS... 7 SERVICE AND REPAIR DATA... 9 APPENDIX... CONNECTION DIAGRAMS SCHEMATIC DIAGRAM INDEX ii
4 Insert INTRODUCTION TO TESTING WATTHOUR METERS Bulletin X-TWM here
5 CHARTS/TABLES CONSTANT TABLE FOR REFERENCE STANDARDS WITH BASIC Kh OF 6/0 CURRENT COIL AMPERES CONSTANT FOR POTENTIAL COIL OF: 20 VOLTS 240 VOLTS 480 VOLTS CONSTANT TABLE FOR REFERENCE STANDARDS WITH BASIC Kh OF /3 CURRENT COIL AMPERES CONSTANT FOR POTENTIAL COIL OF: 20 VOLTS 240 VOLTS 480 VOLTS /5 2/5 4/5.5 /0 /5 2/5 5 /3 2/3 -/ /6-2/3 3-/ /3 6-2/3 3-/3
6 REFERENCE STANDARD REFERENCE STANDARD Kh = 0.6 ON 20 VOLT, 5 AMP COILS Rated or Test Amps Meter Under Test Full Load (00% Light Load (0%) Number of Stators 20V Kh 240V Std. Curr Coil Rev. Mtr. Rev. Std. Std. Curr Coil Rev. Mtr (or 50) Rev. Std
7 The above data are based on single-phase testing, series connection. 3
8 REFERENCE STANDARD Kh = /3 ON 20 VOLT, 5 AMP COILS Rated or Test Amps Meter Under Test Full Load (00% Light Load (0%) Number of Stators 20V Kh 240V Std. Curr Coil Rev. Mtr. Rev. Std. Std. Curr Coil Rev. Mtr (or 50) Rev. Std The above data are based on single-phase testing, series connection.insert 4
9 WATTHOUR METER ACCURACY CALCULATOR Bulletin -WMAC pg. & 2 here
10 SAFETY PRECAUTIONS Please read all manuals carefully and completely prior to using this unit. Read and understand all safety, caution and operation instructions before attempting to use this unit. Should a situation arise that is not covered in the general or specific safety precautions, contact your local Multi-Amp representative or Multi-Amp Corporation, Dallas, Texas. Repairs should be done with the unit disconnected from the power source. Should repair or adjustment of energized equipment be required, under no circumstance should the work be done alone. Additional personnel should be present to render aid if required. Many Multi-Amp units have a separate chassis grounding point, check to ensure it is properly grounded. Most adjustments can be made with one hand, keep the other hand free and clear of the unit. When using a test meter, if the meter is not insulated, ground the meter case prior to taking measurements. CAUTION: THIS PHANTOM LOAD UTILIZES A TRANSFORMER LOADING PRINCIPLE WITH THE SECONDARY OF THE CURRENT TRANSFORMER BEING THE OUTPUT OF THE DEVICE. AS WITH ALL CURRENT TRANSFORMERS, WHEN CONNECTING LEADS TO THE METER, DO NOT OPEN THE CIRCUIT WITHOUT FIRST TURNING THE CURRENT OFF OR DAMAGE TO THE PHANTOM LOAD MAY RESULT. 4
11 DESCRIPTION OF CONTROLS 2A CIRCUIT BREAKER Provides overload and short circuit protection for the test set. 3/4A FUSE Located internally, this fuse provides additional overload and short circuit protection to the 480 volt input circuit of the phantom load. TEST CURRENT SWITCH OUTPUT ON/OFF SWITCH CURRENT CONTROL POWER FACTOR SWITCH AMMETER Selects the desired range of full load or light load test current that will be applied to the meter under test and to the current coils of the reference standard. Selections are arranged so that full loads and corresponding light load values (0% of full load) are side by side to minimize switching. Allows the output current to be switched off without disturbing any settings. Adjusts the output current of the phantom load from zero to the maximum value as selected by the TEST CURRENT SWITCH. Determines whether the full load test current is at either unity (.0) or 50% (0.5) power factor. Measures the value of output current. Appropriate full scale range is simultaneously selected by the TEST CURRENT SWITCH. The meter scale of the phantom load reads from "0 to.0" so that the actual measured current is equal to the reading of the meter times the setting of the TEST CURRENT SWITCH. For example: If the TEST CURRENT SWITCH is in the 5 ampere position and the meter reads 0.6, the actual output current is 3 amperes (5 X 0.6 = 3). CURRENT TERMINALS POTENTIAL TERMINALS Four output CURRENT TERMINALS (±, 0, 5, 2.5 amp) eliminate lead changing when used in conjunction with a reference standard having multiple current coil terminals (such as the General Electric type IB-0, Sangamo type J-44 or States type SSS-50 solid-state standard). The test set can operate from any of the five rated input and the common (±) POTENTIAL TERMINALS. Connect the input to the common (±) terminal and the line voltage being used to the properly rated terminal. 5
12 INSTALLATION INSTRUCTIONS REFERENCE STANDARD AND PHANTOM LOAD Set a reference standard near the phantom load. Connect the current and potential leads to the reference standard as illustrated in the CONNECTION DIAGRAMS and as outlined below: Current Circuit. Connect the long, red, heavy lead to the ± terminal on the phantom load and the long, black, heavy lead to the ± or 0 terminal on the standard. 2. Connect the short, light leads from the remaining CURRENT TERMINALS of the phantom load to the matching current terminals of the reference standard. Potential Circuit Connect the combination input power/potential click switch leads to the potential terminals of the reference standard and the POTENTIAL TERMINALS located along the left edge of the phantom load. Be sure to observe polarity and to use the properly rated terminal of the phantom load for the line voltage being utilized. If the reference standard being used is the solid state type, connect the auxiliary power leads as shown on the connection diagram. During testing it will be necessary to set the voltage selector switch of the reference standard to the appropriate test potential being used. Line Circuit Connect the potential (input) leads from the phantom load to the line as illustrated on the connection diagram. Be certain the potential select switch of the reference standard matches the line voltage. 6
13 OPERATING INSTRUCTIONS. INITIAL SET-UP Control Position TEST CURRENT SWITCH OFF OUTPUT SWITCH ON CURRENT CONTROL "0" (FULL CCW) POWER FACTOR SWITCH.0 2. Connect the meter to be tested and the reference standard as shown on the appropriate connection diagram and as described under INSTALLATION INSTRUCTIONS in this manual. Note: Be sure to use the proper primary terminal of the phantom load for the line voltage being used. 3. Set the voltage selector switch of the reference standard to the appropriate value for the test potential being used. FULL LOAD TEST 4. Set the TEST CURRENT SWITCH to the appropriate range to obtain the desired full load test current. Note: Always use the lowest range capable of providing the desired test current. 5. Rotate the CURRENT CONTROL clockwise until the desired test current is reached. Note: The meter scale of the phantom load reads from "0 to.0" so that the actual measured current is equal to the reading of the meter times the setting of the TEST CURRENT SWITCH. For example: If the TEST CURRENT SWITCH is in the 5 ampere position and the meter reads 0.6, the actual output current is 3 amperes (5 X 0.6 = 3). 6. Reset the reference standard to zero. 7. Initiate the FULL LOAD TEST by turning the potential click switch on when the black mark on the edge of the meter disk passes a stationary reference point. This starts the reference standard by energizing its potential coil. If the meter under test or the reference standard runs backwards, reverse either the potential or current connections to the backwards unit. Note that a solid state standard will not count if the polarity to one of its coils is reversed. 8. Count the number of disk rotations by watching the black mark pass the reference point. 9. Stop the test when the desired number of revolutions have been made by turning the potential click switch off. This stops the reference standard by de-energizing its potential coil. 7
14 0. Using the WATTHOUR METER TEST FORMULAS in this manual calculate % accuracy of the meter. POWER FACTOR TEST. Same as steps - 0, except set the POWER FACTOR SWITCH to "0.5". LIGHT LOAD TEST 2. Same as steps - 0, except: Step 4: Set the TEST CURRENT SWITCH to the required appropriate range to obtain the desired light load current. WATTHOUR METER TEST FORMULAS The following formula should be used to calculate the reference standard revolutions (R). revolutions of meter under test X meter Kh R = X std. pot. coil std. current coil X X meter elements 20 5 To find the accuracy of any meter, the following formula is used: calculated revolutions of standard % accuracy of meter = X 00 actual revolutions of standard DEMAND METER TEST When testing mechanical demand registers the following formula is used. The reference standard KW is used to compare against the register's KW in order to determine register accuracy. 0.6 X std. pot. coil std. current coil X X TI * X meter elements X standard revolutions 20 5 KW = The following formula will give the demand register's KW when counting the disk revolution of the meter under test. This method uses the watthour meter revolutions to control the test duration and the demand register KW will be as calculated. meter Kh X TI * X meter revolutions KW = minutes * TI (Time Increments) = register time interval 8
15 SERVICE AND REPAIR DATA Servicing This phantom load utilizes straightforward circuits and components which require little or no service except for routine cleaning, tightening of connections, etc. The following maintenance is recommended:. Open the unit every six months and examine for: a. dirt b. loose connections 2. Remove dirt with dry, compressed air or a vacuum cleaner. 3. Tighten all connections, especially on the larger current wires. Service and Repair Order Instructions If factory service is required or desired, contact the factory for return instructions. A Service & Repair Order (SRO) number will be assigned for proper handling of the unit when it arrives at the factory. If desired, a letter with the number and instructions can be provided. Provide the factory with model number, serial number, nature of the problem or service desired, return address, your name, and where you can be reached should the factory need to contact you. A purchase order number, cost limit, billing, and return shipping instructions may also be provided if desired. If an estimate is requested, provide the name and contact information of the person with approval/disapproval authority. Pack the equipment appropriately to prevent damage during shipment. If a reusable crate or container is used, the unit will be returned in it if in suitable condition. Put the SRO number on the address label of the shipping container for proper identification and faster handling. NOTE: Ship the equipment without instruction manuals or non-essential items such as test leads, spare fuses, etc. These items are not needed to conduct repairs. 9
16 Warranty Statement Multi-Amp Corporation warrants to the original purchaser that the product is free from defects in material and workmanship for a period of one () year from date of shipment. This warranty is limited and shall not apply to equipment which has damage, or cause of defect, due to accident, negligence, improper operation, faulty installation by purchaser, or improper service or repair by any person, company or corporation not authorized by the Multi-Amp Corporation. Multi-Amp Corporation will, at its' option, either repair or replace those parts and/or materials that it deems to be defective. Any costs incurred by the purchaser for the repair or replacement of such parts and/or materials shall be the sole responsibility of the original purchaser. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED ON THE PART OF THE MULTI-AMP CORPORATION, AND IN NO EVENT SHALL THE MULTI-AMP CORPORATION BE LIABLE FOR THE CONSEQUENTIAL DAMAGES DUE TO THE BREACH THEREOF. 0
17 APPENDIX
18 Insert CONNECTION DIAGRAMS pg. through 5 here
19 Insert SCHEMATIC DIAGRAM here
20 INDEX Ammeter...5 CHARTS... Circuit breaker...5 CONNECTION DIAGRAMS... Appendix CONTROLS...5 Ammeter...5 Circuit breaker...5 Current control...5 Current terminals...5 Fuse...5 Output ON/OFF switch...5 Potential terminals...5 Power factor switch...5 Test current switch...5 Current control...5, 7 Current terminals... 5, 6 DEMAND METER TEST...8 DESCRIPTION OF CONTROLS...5 FULL LOAD TEST...7 Fuse...5 INTRODUCTION TO TESTING WATTHOUR METERS...ii LIGHT LOAD TEST...8 OPERATING...7 Current control...7 Output ON/OFF switch...7 Power factor switch...7, 8 Test current switch...7, 8 Output ON/OFF switch...5, 7 Potential terminals... 5, 6 Power factor switch... 5, 7, 8 POWER FACTOR TEST...8 SAFETY PRECAUTIONS... 4 SCHEMATIC DIAGRAM... Appendix Service and Repair Order Instructions...9 Servicing...9 TABLES... Test current switch... 5, 7, 8 Warranty Statement...0 WATTHOUR METER TEST FORMULAS...8
21
22
C60 Standby UPS. 800VA Models. User & Installation Manual Xtreme Power Conversion Corporation. All rights reserved.
For more information, visit www.247technology.com/on-line-ups/c60-standby-ups C60 Standby UPS 800VA Models User & Installation Manual 2015. All rights reserved. (Rev 6/23/15) Table of Contents Package
More informationPrecision Automatic Vacuum Control (PAVC+)
USER GUIDE UGE105-1216 www.conairgroup.com Precision Automatic Vacuum Control (PAVC+) Corporate Office: 724.584.5500 l Instant Access 24/7 (Parts and Service): 800.458.1960 l Parts and Service: 814.437.6861
More informationXBDM-HW63. 63A Model. User & Installation Manual Xtreme Power Conversion Corporation. All rights reserved.
XBDM-HW63 63A Model User & Installation Manual www.xpcc.com 2016. All rights reserved. (Rev 3/02/16) Table of Contents Introduction...3 Product Overview... 3 Installation and Operation...4 Inspection...4
More informationJ60 Lithium Ion UPS 350VA Model User & Installation Manual Xtreme Power Conversion Corporation. All rights reserved.
J60 Lithium Ion UPS 350VA Model User & Installation Manual www.xpcc.com 2018. All rights reserved. (Rev 5/24/18) Table of Contents Package Contents...3 Product Introduction...3 Product Overview...3 Installation
More informationInstallation and Operation Manual
Installation and Operation Manual Maintenance Bypass Panel Model: SU2030KMBP Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice. 1111 West
More informationMiniglaze/2. Owner & Operator's Manual PORCELAIN STAINING AND GLAZING FURNACE. Model No: Voltage: V 50/60Hz V 50/60Hz
Miniglaze/2 PORCELAIN STAINING AND GLAZING FURNACE Owner & Operator's Manual Model No: Voltage: 9490950 115V 50/60Hz 9490952 220V 50/60Hz DESCRIPTION PAGE Safety...2 Features...3 Furnace Description...4
More informationMaintenance Bypass Breaker Cabinet Series Configuration 2. Installation and Operation Manual
Maintenance Bypass Breaker Cabinet 90881 Series Configuration 2 Installation and Operation Manual 03/13/2012 2 755-00084-C2 R03 Copyright 2012 C&C Power, Inc. All rights reserved. C&C Power, Inc. 395 Mission
More informationField Economy Unit Instruction Manual
Field Economy Unit Instruction Manual Models CDC3FE-001 CDC3FE-002 CDC3FE-003 Table of Contents 1. General Description............................................................ 2 2. Specifications &
More informationMaintenance Bypass Breaker Cabinet Series Configuration 5. Installation and Operation Manual
Maintenance Bypass Breaker Cabinet 90881 Series Configuration 5 Installation and Operation Manual 03/13/2012 2 755-00084-C5 R03 Copyright 2012 C&C Power, Inc. All rights reserved. C&C Power, Inc. 395 Mission
More informationP1902 Installation Manual
P1902 Installation Manual Precision Lighting Controller P1902-JRev. 1.0 2010 Profile Systems, LLC 1000 E. 80 th Place Suite 777 South Merrillville, IN 46410 (800) 898-5483 www.profilesystems.com Revision
More informationMTTC User Manual. Innovative Technology for a Connected World. General Description. Specifications and features
Innovative Technology for a Connected World MTTC-1410 General Description The MTTC-1410 Thermoelectric is a precision instrument that utilizes Pulse Width Modulation (PWM) control technology to provide
More informationModel HH Signal-Conditioner / Indicator
Model HH Signal-Conditioner / Indicator 2080 Arlingate Lane, Columbus, Ohio 43228 USA (614)850-5000 Sensotec, Inc. 2080 Arlingate Lane Columbus, Ohio 43228 USA Copyright 2002 by Sensotec, Inc. all rights
More informationAA2-M CONTROLLER IMPORTANT!!!!
AA2-M CONTROLLER 4300 WINDFERN RD., SUITE 100 HOUSTON, TX 77041-8943 VOICE (713) 973-6905 FAX (713) 973-9352 WEB: www.twrlighting.com IMPORTANT!!!! PLEASE TAKE THE TIME TO FILL OUT THE FORM COMPLETELY.
More informationThermoelectric Cooler
INSTRUCTION MANUAL Thermoelectric Cooler TE090624020, TE121024020, TE121048020, TE162024020, TE162048020, TE090624010, TE121024010, TE121048010, TE162024010, TE162048010, TE090624011, TE121024011, TE162024011
More informationSAVE THESE INSTRUCTIONS
and Fixed Trapeze Assembly, Installation and Operating Instructions Model Nos. 7714P and 7740P SAVE THESE INSTRUCTIONS NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use.
More informationThermoelectric Coolers. All Models INSTRUCTION MANUAL. Rev. G 2016 Pentair Equipment Protection P/N
Thermoelectric Coolers All Models INSTRUCTION MANUAL Rev. G 2016 Pentair Equipment Protection P/N 89072602 89072603 TABLE OF CONTENTS RECEIVING THE THERMOELECTRIC COOLER...3 HANDLING & TESTING THE THERMOELECTRIC
More informationPOWER PINNER BENCH HAND WELDER 7250 OPERATOR S MANUAL
POWER PINNER BENCH HAND WELDER 7250 OPERATOR S MANUAL Copyright: November 20, 2018 Revised: Serial No. Gripnail Corporation An Employee Owned Company 97 Dexter Road East Providence, Rhode Island 02914-2045
More information10810 W. LITTLE YORK RD. #130 - HOUSTON, TX VOICE (713) FAX (713) web: IMPORTANT!!!
10810 W. LITTLE YORK RD. #130 - HOUSTON, TX 77041-4051 VOICE (713) 973-6905 - FAX (713) 973-9352 web: www.twrlighting.com IMPORTANT!!! PLEASE TAKE THE TIME TO FILL OUT THIS FORM COMPLETELY. FILE IT IN
More informationInstruction Manual V2.0. Instruction Manual. Laser Diode Drivers Models: LSP-500/1000/1500/-XK-XX
Instruction Manual Laser Diode Drivers Models: LSP-500/1000/1500/-XK-XX This manual contains Operating, Safety, and Maintenance information and subjects to change without notice. Lic engineering 3735 Coffey
More informationInstruction Manual V2.0. Instruction Manual. High Power Laser Diode Drivers/High Voltage Pulser/ High Voltage Switch Models: LSP-500/1000/1500/-XK-XX
Instruction Manual High Power Laser Diode Drivers/High Voltage Pulser/ High Voltage Switch Models: LSP-500/1000/1500/-XK-XX This manual contains Operating, Safety, and Maintenance information and subjects
More informationWash Down Duty Non-Contact Sensor
Wash Down Duty Non-Contact Sensor Instruction Manual Models WDDC1-020/040/060/080/100 WDDC2-020/040/060/080/100 WDDV1-020/040/060/080/100 WDDV2-020/040/060/080/100 Table of Contents 1. General Description.....................................
More informationMiniglaze/2. Owner & Operator's Manual PORCELAIN STAINING AND GLAZING FURNACE. Model No: Voltage: V 50/60Hz V 50/60Hz
Miniglaze/2 PORCELAIN STAINING AND GLAZING FURNACE Owner & Operator's Manual Model No: Voltage: 9490950 115V 50/60Hz 9490952 220V 50/60Hz DESCRIPTION PAGE Safety...2 Features...3 Furnace Description...4
More informationSingle-Phase Meter Installation
Single-Phase Meter Installation S T U D E N T M A N U A L March 31, 2005 2 STUDENT TRAINING MANUAL Prerequisites: None Objectives: From memory, you will be able to explain single-phase meter test procedures,
More informationMODELS MB1K-1, MB1K-2 MB2K-1, MB2K-2 MB3K-1, MB3K-2
FALCON ELECTRIC INC. OWNER S MANUAL SG Series Maintenance Bypass Option 1KVA 3KVA MODELS MB1K-1, MB1K-2 MB2K-1, MB2K-2 MB3K-1, MB3K-2 OM48030 Rev. B 01/17/03 FALCON Electric Inc., 5106 Azusa Canyon Road,
More informationAgilent 16034E Test Fixture
Agilent 16034E Test Fixture Operation and Service Manual Third Edition Agilent PN 16034-90041 December 1999 Printed in: Japan Notices The information contained in this document is subject to change without
More informationHYDRAULIC DOCK LEVELER OWNERS MANUAL
HYDRAULIC DOCK LEVELER OWNERS MANUAL 1 HYDRAULIC DOCK LEVELER OWNERS MANUAL 2 TABLE OF CONTENTS Table Of Contents.. Page 2 Koke Hydraulic Leveler Model Information... Page 3 Hydraulic Dock Leveler Installation
More informationGlobal Water Instrumentation, Inc.
Global Water Instrumentation, Inc. 151 Graham Road P. O. Box 9010 College Station, TX 77842-9010 T: 800-876-1172 Int l: (979) 690-5560, F: (979) 690-0440 4-20 ma Output Module RG700 00-663 Rev. B Publication
More informationT1000 Transformer INSTRUCTION SHEET. for Magnetic-Field Susceptibility Testing. Features
INSTRUCTION SHEET T1000 Transformer for Magnetic-Field Susceptibility Testing Features Up to 100 A RMS secondary current Exceeds AF Magnetic Field test requirements of DO 160 Section 19 and Boeing D6-16050-5
More informationDUST FREE ACTIVE Total Home Air Purification
DUST FREE ACTIVE Total Home Air Purification Installation & Operation Manual This manual covers the following models: DF ACTIVE 6" - #13070 DF ACTIVE 12" - #13071 GENERAL This device is designed to be
More informationMIRUS International Inc.
MIRUS International Inc. INSTALLATION, OPERATION AND MAINTENANCE GUIDE AUTOTRANSFORMER AND UNIVERSAL HARMONIC FILTER IMPORTANT SAFETY INSTRUCTION SAVE THESE INSTRUCTIONS - This manual contains important
More information78-RK VARIABLE SPEED HEAVY DUTY VIBRATOR OPERATING MANUAL
78-RK VARIABLE SPEED HEAVY DUTY VIBRATOR OPERATING MANUAL IMPORTANT INSTRUCTIONS WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION FD.08/2009 THANK YOU FOR PURCHASING
More information10810 W. LITTLE YORK RD. #130 - HOUSTON, TX VOICE (713) FAX (713) web: IMPORTANT!!!
10810 W. LITTLE YORK RD. #130 - HOUSTON, TX 77041-4051 VOICE (713) 973-6905 - FAX (713) 973-9352 web: www.twrlighting.com IMPORTANT!!! PLEASE TAKE THE TIME TO FILL OUT THIS FORM COMPLETELY. FILE IT IN
More informationOPERATION AND INSTALLATION MANUAL
IQ200TE and IQ300TE Thermoelectric Coolers OPERATION AND INSTALLATION MANUAL *** IMPORTANT *** PLEASE READ this manual and follow the instructions for safe and satisfactory installation and operation of
More informationISIMET. E Series Enclosure. Custom Assemblies Installation, Maintenance, and Operation Instructions
ISIMET E Series Enclosure Custom Assemblies Installation, Maintenance, and Operation Instructions The Custom Assembled E-Series Enclosures is pre-assembled and pre-wired enclosure intended for use with
More informationDESIGNERS AND BUILDERS OF CURRENCY CHANGERS AND ALLIED SYSTEMS SINCE 1921 FOR RLC-2 / RLC-3. Manual Part No Revision No.
DESIGNERS AND BUILDERS OF CURRENCY CHANGERS AND ALLIED SYSTEMS SINCE 1921 SERVICE & PARTS MANUAL FOR RL-2 / RL-3 & RLC-2 / RLC-3 Manual Part No. 95-0011 04-27-00 Revision No. 001 RL-2/RL-3 & RLC-2/RLC-3
More informationQuick-Start Operating Guide Document No Process Gas Cooler Copyright 2010 Terra Universal Inc. All rights reserved. Revised October 2010
Document No. 1800-56 Copyright 2010 Terra Universal Inc. All rights reserved. Revised October 2010 Terra Universal, Inc. TerraUniversal.com 800 S. Raymond Ave. Fullerton, CA 92831 TEL: (714) 578-6000 FAX:
More informationSignal Follower Card. Instruction Manual Model C
Signal Follower Card Instruction Manual Model C10032-000 Table of Contents General Description... 2 Features... 3 Typical Applications....3 Specifications... 3 Adjustment Procedure... 4 Prints... 5 Standard
More informationModel 3185E DUAL TONE DECODER INSTRUCTION MANUAL
Model 3185E DUAL TONE DECODER INSTRUCTION MANUAL Monroe Electronics 100 Housel Ave Lyndonville NY 14098 phone 585-765-2254 fax 585-765-9330 monroe-electronics.com Printed in USA Copyright Monroe Electronics,
More informationAgilent 16047D Test Fixture
Agilent 16047D Test Fixture Operation and Service Manual Third Edition Agilent Technologies Japan, Ltd. Agilent PN 16047-90300 May 2000 Printed in Japan Notices The information contained in this document
More informationAdjustable Fused Power Supply
User & Installation Manual EN Adjustable Fused Power Supply 7-20V 3A P010-52 Contact & Product mo-vis BVBA Biebuyckstraat 15 D 9850 Nevele - Belgium Website: www.mo-vis.com E-mail: contact@mo-vis.com Telephone:
More information10810 W. LITTLE YORK RD. #130 - HOUSTON, TX VOICE (713) FAX (713) web: IMPORTANT!!!
10810 W. LITTLE YORK RD. #130 - HOUSTON, TX 77041-4051 VOICE (713) 973-6905 FAX (713) 973-9352 web: www.twrlighting.com IMPORTANT!!! PLEASE TAKE THE TIME TO FILL OUT THIS FORM COMPLETELY. FILE IT IN A
More informationInstallation, Operating and Maintenance Instructions Incognito Series Air Curtain
Installation, Operating and Maintenance Instructions Incognito Series Air Curtain Models: INC10036, INC10042, INC10048, INC10064, INC10072, INC10084, INC10096, INC10108, INC10120, INC10144. READ THIS OWNER
More informationModel 292A. Surface Resistance Test Kit. Instruction Manual
Model 292A Surface Resistance Test Kit Instruction Manual Printed in USA Copyright 2016 Monroe Electronics, Inc. Specifications subject to change without notice. P/N 0340198 292A/100 04122016 100 Housel
More informationMobile Hot Food Merchandiser Series. Series: MM Operation Manual
Mobile Hot Food Merchandiser Series Series: MM Operation Manual BKI LIMITED WARRANTY 2812 Grandview Dr. Simpsonville, SC 29680 USA (864) 963-3471 Toll Free: (800) 927-6887 Fax: (864) 963-5316 WHAT IS COVERED
More informationDICKSON TH8 DICKSON. Temperature & Humidity Chart Recorder Operation. Useful Features. Applications & Product. Specifications. Product.
TH8 Temperature & Humidity Chart Recorder Operation Contents: Applications and Calibrations Operating Troubleshooting Warranty / Applications Temperature and humidity are critical in so many areas. The
More informationPORTABLE CHAIR SCALES BEAM and DIGITAL TYPES MODELS 475, 4751, 6475, 6475k and 6475KGEU
PORTABLE CHAIR SCALES BEAM and DIGITAL TYPES MODELS 475, 4751, 6475, 6475k and 6475KGEU CARDINAL SCALE MFG. CO. 0033-M128-O1 Rev H PO Box 151 Webb City, MO 64870 10/08 Ph: 417-673-4631 Fax: 417-673-5001
More informationIntroduction TMD Warnings and Cautions Caution: Caution: Caution: Caution: Caution: Caution: Modification
Introduction This guide provides instruction for operation, maintenance, and troubleshooting procedures for the Tumescent Measuring Device - the TMD. All users should be versed in its use and application
More informationM LIM Line Leak Interface Module Procedure Guide (only for the Integra 500)
Part Number: M00-20-8321-LIM, Rev. 0 Issue Date: November 10, 2014 Supersedes: N/A M00-20-8321-LIM Line Leak Interface Module Procedure Guide (only for the Integra 500) 6900 Santa Fe Drive Hodgkins, IL
More informationDancer Duty Potentiometer
Dancer Duty Potentiometer Instruction Manual Model DDP01-K010 Model DDPS1-K010 Model DDP01-K005 Model DDPS1-K005 Model DDP02-K010 Model DDPS2-K010 Model DDP02-K005 Model DDPS2-K005 Table of Contents 1.
More informationMiT. MOVING image TECHNOLOGIES INSTRUCTIONS FOR INSTALLATION, OPERATION, AND MAINTENANCE. MPL Digital Pedestal. Manual Version 0.2
MiT MOVING image TECHNOLOGIES INSTRUCTIONS FOR INSTALLATION, OPERATION, AND MAINTENANCE OF MPL Digital Pedestal Manual Version 0.2 MOVING image TECHNOLOGIES, LLC. 17760 Newhope St. Fountain Valley, CA
More informationDistributed By: iprocessmart.com
LS7000 LEVEL SWITCH OWNERS MANUAL INSTALLATION CALIBRATION TROUBLESHOOTIN WARRANTY Distributed By: iprocessmart.com Tel: (925) 706-7433 Fax: (925) 706-2583 E-Mail: sales@iprocessmart.com BABBITT INTERNATIONAL,
More informationSwitch-Tek. LV41 & LV42 Series Manual. Sump Float Level Switches
Switch-Tek Sump Float Level Switches LV41 & LV42 Series Manual LV41 Series Shown LV42 Series Shown Flowline, Inc. 10500 Humbolt Street, Los Alamitos, CA 90720 p 562.598.3015 f 562.431.8507 w flowline.com
More informationIntroduction Specifications Control Panel / Remote Unit Diagrams Setting Up the Unit Maintaining the Unit Safety info / Warnings Warranty Information
Gobi Owner s Manual Introduction Specifications Control Panel / Remote Unit Diagrams Setting Up the Unit Maintaining the Unit Safety info / Warnings Warranty Information 3 4 5 6 7 8 9 10 Introduction
More informationInstruction Manual. Model 2831D. 4 ½ Digit True RMS Digital Multimeter
Instruction Manual Model 2831D 4 ½ Digit True RMS Digital Multimeter CONTENTS 1. PRODUCT DESCRIPTION 1-1. Introduction --------------------------------------------------------- ( 3 ) 1-2. Technical Specifications
More informationCalibrate Accessory Actuators Instructions
Instruction Manual Table of Contents Conditions of Sales and Product Warranty 3 Copyright Notice & Disclaimer 4 1.0 Technical Specifications 5 1.1 Features 6 2.0 Description 7 2.1 Components 8 3.0 Receiving
More informationDS-520 Digital Indicator Operation Manual 73366
DS-520 Di gi tal Indi cator Operation Manual 73366 SECTION DS-520 SERIES OPERATING MANUAL INDEX PAGE NUMBER 1.0 GENERAL 2-3 1.1. Features 2 1.2. Keyboard & Display Layout 2 1.3. Key Switch Information
More informationOPERATOR S MANUAL Model 56A Prefeed / Dereeler
110 Fairgrounds Drive P.O. Box 188 Manlius, NY 13104-0188 USA 315.682.9176 FAX: 315.682.9160 OPERATOR S MANUAL Model 56A Prefeed / Dereeler PRODUCTION WIRE PROCESSING EQUIPMENT Website: www.carpentermfg.com
More informationAgilent 16048D Test Leads
Agilent 16048D Test Leads Operation and Service Manual Fourth Edition Agilent Technologies Japan, Ltd. Agilent PN 16048-90031 May 2000 Printed in Japan Notices The information contained in this document
More informationSageon Site Monitor (SSM) Application Note
Sageon Site Monitor (SSM) Application Note AN103-4012-00, Issue 3 UNIPOWER, LLC 3900 Coral Ridge Drive Coral Springs, FL 33065 Phone: +1-954-346-2442 Toll Free: 1-800-440-3504 Web site http://www.unipowerco.com
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More information4300 WINDFERN RD #100 HOUSTON TX VOICE (713) FAX (713) web: twrlighting.com IMPORTANT!!!
4300 WINDFERN RD #100 HOUSTON TX 77041-8943 VOICE (713) 973-6905 FAX (713) 973-9352 web: twrlighting.com IMPORTANT!!! PLEASE TAKE THE TIME TO FILL OUT THIS FORM COMPLETELY. FILE IT IN A SAFE PLACE. IN
More informationCFL Series User Manual
CFL SERIES Continuous Level Transmitter CFL Series User Manual Quick Start Guide TM Please read this manual carefully before using product CFL Series Sensor Manual Heavy Duty Industrial Level Transmitter
More informationRJE INTERNATIONAL, INC. U LB-364EL R EV 3.2
RJE INTERNATIONAL, INC. U LB-364EL U SER S MANUAL R EV 3.2 FORWARD This manual provides instructions and descriptions regarding the deployment, operation, and maintenance of the Underwater Locator Beacon
More informationTABLE OF CONTENTS. Section Paragraph Title Page. ADDENDUM Visual Index Quick Reference. 1 General Information 1-1
TABLE OF CONTENTS Section Paragraph Title Page ADDENDUM Visual Index Quick Reference i 1 General Information 1-1 Features 1-1 General Description 1-1 Specifications 1-2 2 PCM-SSD Technical Reference 2-1
More informationDrag Chain Conveyor Installation and Operation Manual
Drag Chain Conveyor Installation and Operation Manual Material Handling Equipment Sales, Incorporated 310 S. Section Line Rd Delaware, OH 43015 Phone: (989) 430-4005 Fax: (740) 363-9004 WARRANTY MATERIAL
More informationModel T2642E Wall Mount. Television Wall Mount with Tilt Option
Model T2642E Wall Mount Television Wall Mount with Tilt Option Getting Started Introduction Congratulations on the purchase of your new Audio Solutions T2642E Television Wall Mount. For maximum benefit,
More informationHDI 2200 Choke Position Indicator
HDI 2200 Choke Position Indicator Operations and Maintenance Manual Rev. 1203 www.houstondigital.com email: sales@houstondigital.com or service@houstondigital.com TABLE OF CONTENTS SECTION 1 SECTION 2
More informationMechanical Medic-Aid 6 Selection Vending Machine Operator s Manual
Mechanical Medic-Aid 6 Selection Vending Machine Operator s Manual 1 INTRODUCTION Congratulations on the purchase of your new 6 Selection Mechanical Pedestal Vendor. This vendor has been designed to give
More informationS70 Line Interactive Tower UPS
S70 Line Interactive Tower UPS 500VA, 700VA, 1000VA, 1500VA, 2000VA Models User & Installation Manual www.xpcc.com 2014. All rights reserved. (Rev 8/13/14) Table of Contents Package Contents...3 Product
More informationWARNING ELECTRIC PALLET TRUCK EPT Revised A company dedicated to solving ergonomic and material handling problems since 1955.
VESTIL MANUFACTURING CORPORATION 2999 North Wayne Street, P.O. Box 507 Angola, Indiana 46703 USA Phone (260) 665-7586 Fax (260) 665-1339 sales@vestil.com www.vestil.com SAFETY INSTRUCTIONS & OPERATING
More informationModel K11. 10ppm Accuracy DC Voltage Standard. Operating Manual
Model K11 10ppm Accuracy DC Voltage Standard Operating Manual This page intentionally left blank. MODEL K-11 OPERATORS MANUAL Serial No. This page intentionally left blank. K11 OPERATORS MANUAL Copyright
More informationWALL SHELVES. Cleaning and Maintenance INSTRUCTION MANUAL
INSTRUCTION MANUAL WALL SHELVES Cleaning and Maintenance Read and understand all of the instructions and safety information in this manual before operating this product. MAN-076 REV B 2018 MAC Medical,
More informationWARRANTY GENERAL POLICY AND RETURN GOODS PROCEDURE. For Original Equipment Manufacturers Only
WARRANTY GENERAL POLICY AND RETURN GOODS PROCEDURE For Original Equipment Manufacturers Only MASTERFLUX COMPRESSORS, CONTROLLERS, AND COMPONENT PARTS WARRANTY TO ORIGINAL EQUIPMENT MANUFACTURERS ONLY Masterflux,
More informationH-1/SS-1 Changer Operational Manual
H-1/SS-1 Changer Operational Manual Document #101-0035 1 1/2/03 ABOUT THIS MANUAL This manual will provide the operator with important information about installing and maintaining the H-1 or SS-1 Changer.
More informationNew Advanced Environmental Air Treatment System
Commercial PHI Unit New Advanced Environmental Air Treatment System Thank you for purchasing the Commercial PHI Unit by RGF Advanced Oxidation Systems. We are confident this system will provide you with
More informationDMX-BRANCH/4. user manual. ELATION DMX-BRANCH/4 user manual
DMX-BRANCH/4 user manual ELATION DMX-BRANCH/4 user manual 2016 ELATION PROFESSIONAL all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without
More informationCA11 11 Column. Operator s Manual. To Purchase This Item, Visit BMI Gaming LIMITED WARRANTY
LIMITED WARRANTY Seaga warrants to the original purchaser that the equipment is free from defects in material and factory workmanship for a period of one (1) year from date of shipment. Repair or replacement
More informationPalletPal Pallet Inverter / Rotator
PalletPal Pallet Inverter / Rotator Owner s Manual SOUTHWORTH PRODUCTS CORP PO Box 1380, Portland, ME 04104-1380 Telephone: 1-800-743-1000 or 207-878-0700 Fax: 207-797-4734 www.southworthproducts.com service@southworthproducts.com
More informationAPC Step-Down Transformer. Models: AP9626, AP9627, and AP9628
User Manual English APC Step-Down Transformer Models: AP9626, AP9627, and AP9628 990-7820F 06/2006 Introduction Introduction The APC step-down transformers are used to convert a higher input voltage (208-200
More informationInstructions and E00 Series Sampling Module Extenders
Instructions 012-1568-00 and 012-1569-00 80E00 Series Sampling Module Extenders 071-0436-01 www.tektronix.com 071043601 Copyright Tektronix, Inc. All rights reserved. Tektronix products are covered by
More informationY SIDE ALUMINUM TRUCK RACK
Y SIDE ALUMINUM TRUCK RACK Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationOwner s Manual Calcite Cartridge System
Owner s Manual Calcite Cartridge System Page 2 Copyright 2011 Enviro Water Solutions, Inc. All rights reserved. All information contained herein is the property of Pelican Water Technologies. Pelican Water
More informationMetering Procedures for PA Renewable Energy Credits (MPREC)
Metering Procedures for PA 11-80 Renewable Energy Credits (MPREC) Published: 01/01/2015 Revised: 08/08/2017 MPREC REV. 4 1.0 Introduction: A Facility must follow the metering specifications in Tables 1-1
More informationRJE INTERNATIONAL, INC.
RJE INTERNATIONAL, INC. U LB-364 U N D ERWATER LOCATOR B EACON U SER S MANUAL R EV 3.1 1 0 / 2 3 / 2 0 1 7 PROPRIETARY MATERIAL The descriptions, procedural information, photos, figures, drawings, and
More informationDynatronics Parallel Bars
Dynatronics Parallel Bars Operation & Service Manual For: Electric Height & Width Parallel Bars Electric Height Parallel Bars Platform Parallel Bars Folding Parallel Bars Dynatronics Corporation Dynatronics
More information117-Bin Wire Shelf Storage Rack
117-Bin Wire Shelf Storage Rack Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationOwner's manual SAX-1200D SAZ-1500D SAZ-2500D SAZ-3500D
Owner's manual SAX-1200D SAZ-1500D SAZ-2500D SAZ-3500D Congratulations on your purchase of a Sundown Audio high performance car audio amplifier. Your new amplifier has been built to the highest standards
More informationAM1760/1762 Secondary Standard Platinum Resistance Thermometer User s Guide
AM1760/1762 Secondary Standard Platinum Resistance Thermometer User s Guide Please download the latest version at www.accumac.com Rev. 201609V3 Table of Contents Before you start ---- Warnings & Cautions...
More informationDMC When Accuracy Counts
DMC-1000 Automati c Bi l l Counter When Accuracy Counts Operation Manual 74638 DMC-1000 Automatic Bill Counter Operation Manual Page 3 Index GENERAL 4 PART ONE BASIC INSTRUCTIONS FOR ALL TYPES OF MACHINES
More informationV 2.0 ASSEMBLY GUIDE. TS Platform Scale Series 2
V 2.0 ASSEMBLY GUIDE Series 2 TABLE OF CONTENTS OVERVIEW General Specifications...1 Cautions and Disclaimers...1 Contents of Kit...1 Tools Required For Assembly...2 Time Required to Assemble...2 ASSEMBLING
More information3601 E. 34th St. Tucson, AZ USA Tel Fax Web:
Equipment Type: Model: Electrical Requirements: Frequency: Manual Revision Date: Air Flow Sound Level Fume Hood FUME HOOD 110V 60 Hz February 15, 2018 1175-1470 cfm 65 dba Contents Warranty PAGE ii 1.0
More informationManual No Revision MODEL GLI HAND-HELD/PORTABLE TOTAL/FREE CHLORINE METER
Manual No. 93711 Revision 0-401 MODEL GLI-93711 HAND-HELD/PORTABLE TOTAL/FREE CHLORINE METER Please read this instruction manual carefully before using the instrument. This manual will provide you with
More informationSECTION AUTOMATIC TRANSFER SWITCH
SECTION 26 36 23 AUTOMATIC TRANSFER SWITCH PART 1: GENERAL 1.01 SCOPE A. Furnish all labor, materials, equipment and appurtenances, install and test electrically operated, automatic transfer switch (ATS)
More information6 Closet light. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
6 Closet light Model 95792 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationAM1880 Standard Platinum Resistance Thermometer User s Guide
AM1880 Standard Platinum Resistance Thermometer User s Guide Please download the latest version at www.accumac.com Rev. 201609V3 Table of Contents Before you start ---- Please read to avoid possible warranty
More informationJ1939 to NMEA2000 Adaptor Part Numbers: 3185 USER MANUAL
J1939 to NMEA2000 Adaptor Part Numbers: 3185 USER MANUAL Revision 1.01 1 Introduction...2 1.1 Firmware Revision...2 1.2 Product Features...2 2 Installation...3 2.1 Unpacking the box...3 2.2 Mounting the
More informationDouble-Drum Forklift Gripper
Double-Drum Forklift Gripper Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationH8SX/1650 Series E6000H TFP-120 User System Interface Board User s Manual HS1650ECN61H
H8SX/1650 Series E6000H TFP-120 User System Interface Board User s Manual HS1650ECN61H Rev.3.00 2003.10.6 Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum
More informationVWR Zero Air Generator Models , Installation, Operation, and Maintenance Manual. Bulletin TI-ZAG3500-L1466
VWR Zero Air Generator Models 26000-020, 26000-022 Bulletin TI-ZAG3500-L1466 Installation, Operation, and Maintenance Manual Bulletin TI-ZAG3500-L1466 VWR Model 26000 Zero Air Generators Warranty United
More information66-Bin Wire Shelf Storage Rack
66-Bin Wire Shelf Storage Rack Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More information