SERIES 7700 Butterfly Valve
|
|
- Frederica Bridges
- 6 years ago
- Views:
Transcription
1 SERIES 00 AN-2- Series 00 butterfly valve with 0 position lever lock Used in commercial grooved-end piping systems 2" through 2". The uniqueness of the Series 00 ruvlok begins with the spherical bore of the disc seat area. This facilitates a constant DISC-TO-SEAT loading that maintains a leak tight stem seal regardless of disc position. The stem sealing force is constant through the full disc cycle and operating torques are kept low which increases valve life. The design provides a bubble tight seal from full vacuum to 00 psi when the valve is closed. The valve is rated for dead-end service to a full pressure rating of 00 psi. Silicone Free Series 00 available upon special request. NSF/ANSI 6 AN-22- Series 00 butterfly valve with gear operator The stem-to-disc connection provides zero backlash. The high strength, corrosion resistant, stainless steel stems are blow-out proof. Each stem is fitted with a secondary seal that also provides a lifetime lubrication chamber. The Series 00 valve is designed with the contractor in mind. The valve body is a rugged one-piece casting with an integral mounting base for gear operator or handle actuation, while providing room for a minimum of 2" of pipe insulation. The valve is designed and manufactured to meet or exceed the requirements of MSS SP-6. For data on fire protection listings/approvals, contact your Anvil representative. 2" - 0" Series 00 Certified to NSF/ANSI 6 (cold water) and Annex LEAD FREE Project: Address: Contractor: Engineer: Submittal Date: Notes : Notes 2: L-8.4 PROJECT INFORMATION APPROVAL STAMP q Approved q Approved as noted q Not approved Remarks:
2 SERIES 00 MATERIAL SPECIFICATIONS. BODY: Ductile Iron conforming to ASTM A 56, rade Body Coating: Nylon (For nylon coating resistance, see table on page 8.) 2. DISC: Ductile Iron conforming to ASTM A 56 rades Disc Encapsulation: Properties as specified in accordance with ASTM D rade E (EPDM): Service Temperature Range -40 F to +20 F (-40 C to +0 C) Recommended for water service, dilute acids, alkalies, oil-free air and many chemical services. NOT FOR USE IN PETROLEUM SERVICES. rade T (Nitrile): Service Temperature Range -20 F to +80 F (-2 C to +82 C) Recommended for petroleum products, air with oil vapors, vegetable oils and mineral oils. NOT FOR USE IN HOT WATER SERVICES., 4. UPPER AND LOWER SHAFT: Type 46 Stainless Steel 5. O-RINS: Compatible with disc coating 6,. TOP AND BOTTOM BRONZE SLEEVE BUSHINS: 8", 0", & 2" only RUVLOK BUTTERFLY VALVE SERIES 00 (ORDERIN INFORMATION) Sample Part Number 8" AN2- > 8" A N 2 - Special Body Style Body Coating Series Disc Coating Operator Stem 2" - 2" A N - Nylon -XX - Nitrile (rade T) 0 - None - 46 S.S. SF - Manufactured 2 - EPDM (rade E) - 0 Pos. L/Lock 2 - ear Operator D - Infinite Pos. w/memory Stop 4 - Short 0 Pos. L/lock Operator without Silicone NOTE: For operator safety, hand levers on 8" valves are limited to applications with a 25 PSI (. bar) maximum pressure. For operator safety, hand levers on 0" and 2" valves are not available. L-.6
3 SERIES 00 Dimensions SERIES 00 BUTTERFLY VALVE DIMENSIONS Note: " or 5" handwheels may be included on valves sizes 2" - 4". Contact your Anvil Rep. for additional information. (ANSI/DN) In./mm In./mm A B C D E F H J K L M N P R S T U L-6.
4 SERIES 00 Performance Data Maximum Working Pressure Rating: 00 PSI (Commercial Applications - s 2" thru 2") In./mm In./mm CV VALUES Disc Position (degrees open) ,00, ,0,20 2, ,65,460 2,40,40 4, ,825,62,260 4,50 6, ,440,50,50 5,80 8,50, HEADLOSS EQUIVALENT LENTH OF PIPE Equivalent Feet of Pipe* C=20 Sch. 0 Sch. 0 Sch. 40 Max. Insulating Thickness In./mm In./mm Ft./m In./mm * The equivalent feet of pipe is based on the Hazen and Williams formula and the flow rates typically used with each size valve. VALVE WEIHT AND TORQUE VALUES 5.0 PRESSURE DROP (PSI) VS. (PM) * Approx. Wt. Ea. Operating Pressure 50 PSI 00 PSI 50 PSI 200 PSI 00 PSI In./mm In./mm Lbs./Kg Breakaway Torque (In. - Lbs) / N-m , ,0,400,640,60, ,0 2,5 2,860,00 6, ,00,420 4,60 5,600, ,242. NOMINAL PRESSURE DROP IN POUNDS PER SQUARE INCH (PSI) INCH VALVE 2 /2 INCH VALVE INCH VALVE 4 INCH VALVE 5 INCH VALVE 6 INCH VALVE 8 INCH VALVE 0 INCH VALVE 2 INCH VALVE These values are valid for water and lubricating fluid service only. Contact Anvil for information on torques for dry and non-lubricating fluid service. * Weights may vary based on valve options selected FLOW RATE IN ALLONS PER MINUTE (PM) L-.4
5 SERIES 00 Resistance to various chemicals, as a function of temperature F (Fahrenheit) NYLON COATIN Coating Condition after 8 months immersion 68 F 04 F 40 F 6 F Alcohols benzyl alcohol L P P P butanol *** L P ethanol (pure) *** L glycerine (pure) L P glycol P methanol (pure) *** L P Chlorinated solvents carbon tetrachloride P methyl bromide P methyl chloride P perchloroethylene L trichloroethane L P trichloreothylene L Phenols P P P P Various Organic Compounds anethole carbon disulphide *** L** P diacetone alcohol *** L P dimethyl formamide L ethylene chlorhydrin P P ethylene oxide L P furfurol *** L P glucose tetraethyl lead tetrahydrofurare L Salts, esters, ethers amyl acetate L butyl acetate L diethyl ether dioctylphosphate L dioctylphthalate L ethyl acetate fatty acid esters methyl acetate methyl sulfate L tributylphosphaate L tricresylphosphate L Various Products beer cider crude petroleum *** diesel fuel *** fruit juices fuel-oil greases ground nut oil high octane gasoline *** kerosene (paraffin) *** linseed cake milk mustard normal gasoline *** oils 68 F 04 F 40 F 6 F Various Products (cont d.) solutions or emulsions of D.D.T. or lindane hudroxy-quinoline (agricultural sprays) soap solution stearin solvent naptha *** natural gas turpentine *** vinegar wine Inorganic Acids chromic acid (0%) P P P P hydrochlorhic acid (%) L P P hydrochlorhic acid (0%) L P P nitric acid (all concentrations) P P P P phosphoric acid (50%) L P P sulphuric acid (%) L L P sulphuric acid (0%) L P P sulphur trioxide L P P P Other Inorganic products agriculture sprays bleach solutions L P P P bromine P P chlorine P P P P fluorine P P P P hydrogen hydrogen peroxide (20 volumes) L mercury oxygen L P ozone L P P P potassium permanganate (5%) P P sea water soda water sulphur water L Aldehydes & Ketones acetaldehyde L P acetone *** L P benzaldehyde L P cyclohexanone L P formaldehyde (technical grade) L P methylethylketone (MEK) L P methylethylketone (MIBK) L P Hydrocarbons acetylene benzene *** L butane cyclohexane L decaline L HFA (Forane ) hexane methane naphthalene L propane styrene *** 68 F 04 F 40 F 6 F Hydrocarbons (cont d.) tulene *** L L xylene *** L L Inorganic Bases ammonium hydroxide (concentrated) ammonia (liquid or gas) lime-wash potassium hydroxide (50%) L P P sodium hydroxide (5%) L sodium hydroxide (0%) L L sodium hydroxide (50%) L P P Organic acids & anhydrides acetic acid L P P P acetic anhydrie L P P P citric acid L P formic acid P P P P lactic acid L oleic acid L oxalic acid L P picric acid L P P P tartaric acid (saturated solution) L uric acid L Inorganic Salts alum aluminium sulphate ammonium nitrate barium chloride calcium arsenate (concentrated solutions or slurries) calcium chloride calcium sulphate L copper sulphate diammonium phosphate L magnesium chloride (50%) potassium ferrocyanide potassium nitrate * L* P P potassium sulphate sodium carbonate L P sodium chloride (saturated) sodium silicate sodium sulphide L L trisodium phosphate Organic bases aniline (pure) L P P P diethanolamine (20%) *** *** L pyridine (pure) L P P P urea L L LEEND * = Slight Yellowing ** = Yellowing *** = Swelling observed = ood L = Limited P = Poor L-.6
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart
RYTON (PPS) Chemical Compatibility & Chemical Resistance Chart Explanation of Footnotes 1. Satisfactory to 72 F (22 C) 2. Satisfactory to 120 F (48 C) Ratings -- Chemical Effect A = Excellent. B = Good
More informationPreferred. Steel, Epoxy Powder Coated. Satisfactory. Limited
Corrosion Resistance We manufactures enclosures from a wide range of materials, offering varying degrees of resistance against chemical corrosion. All materials are affected by corrosion in some manner.
More informationtechnical information
CHEMICAL RESISTANCE TABLES Version: 19-08-10 ADD Resins and Chemicals (Pty) Ltd Distribute a comprehensive range of unsaturated polyester resins for chemical resistance applications. The resins recommended
More informationPlastic pipe clamp CLIC TOP 8 64
Plastic pipe clamp CLIC TOP 8 64 Technical data sheet 12/2014 1 1. Product description The most efficient mounting system for pipes, cables and many other applications. Diameter dimensions ranging from
More informationMODEL 2639 AWWA C509 FULL BODY DUCTILE IRON MODEL 2640 AWWA C509 FULL BODY GRAY IRON
MODEL 2639 AWWA C509 FULL BODY DUCTILE IRON MODEL 2640 AWWA C509 FULL BODY GRAY IRON 2639-95 C 6/18/14 2 1/2"-12" R/S VALVE OS&Y EXPLODED VIEW ITEM NO. DESCRIPTION Material QTY. 1 Follower Gland Gray Iron
More informationDiaphragm Liquid Pumps
Diaphragm Liquid Pumps MODELS 52 F F 12 FP 21 52 F F 12 FP 21 FEATURES Self priming Dry running Oil-less, non lubricated Suitable for continuous operation Chemical resistent pump materials for aggressive
More informationPolypropylene Chemical Resistance Table Polypropylene
ART 006 11.07.2001 Ed. 4 Introduction The table in this document summarises the data given in a number of polypropylene chemical resistance tables at present in use in various countries, derived from both
More informationADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES
1 ADVANTAGES OF POLYETHYLENE PIPES COMPARED TO PVC PIPES The main advantages and improvements in drainage networks that will be obtained by the use of PE MAGNUM pipes, in comparison to PVC pipes are: 1.
More informationSENSORS LIGHT CURTAINS SG-IP69K SERIES SAFETY ACCESSORIES FEATURES APPLICATIONS CARATTERISTICHE
LIGHT CURTAINS SAFETY ACCESSORIES SG-IP69K SERIES The SG-IP69K accessory, is a PMMA acrylic tube used to protect and seal the safety light curtains of SG2, SG4 and SG BODY COMPACT series. Thanks to SG-
More informationChem-Stud CHEMICAL SPIN TYPE CAPSULE ADHESIVE PRODUCT DESCRIPTION CHEM-STUD ADHESIVE PROPERTIES
192 Chem-Stud SPIN TYPE CAPSULE ADHESIVE BASE MATERIAL Solid Concrete SIZE RANGE 3" to 1-1" Anchor Rod, No. 3 to No.10 Reinforcing Bar ANCHOR MATERIAL Ester Based Resin PRODUCT DESCRIPTION The Chem-Stud
More informationAP Chemistry Reaction Set
Class: Date: AP Chemistry Reaction Set 2009-2010 Other 1. Pure solid phosphorus (white form) is burned in air. (2002) 2. Sulfur dioxide gas is bubbled into distilled water. (2001) 3. A drop of potassium
More informationEC Duro-Bond Rubber Sheet Linings
EC Duro-Bond Rubber Sheet Linings Description Both Soft Natural Rubber and Hard Natural Rubber Linings are offered by Electro Chemical. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180
More informationAP Chemistry Reaction Set
Class: Date: AP Chemistry Reaction Set 2008-2009 Other 1. Sulfur trioxide gas is bubbled into a solution of sodium hydroxide. (2005) 2. Hydrogen iodide gas is bubbled into a solution of lithium carbonate.
More informationWafer and Lug style resilient seated butterfly valves with cartridge seat design.
Wafer and Lug style resilient seated butterfly valves with cartridge seat design. FEATURES AND BENEFITS Suitable for high pressure and full vacuum service due to the use of a cartridge seat design. Triple
More informationAnti-Corrosive Heat Resistant Chain
ANTI-CORROSIVE / HEAT RESISTANT CHAIN Anti-Corrosive Heat Resistant Chain ULTRA WP CHAIN ULTRA WP chain resists corrosion when exposed to harsh outdoor environments, including seawater. The exclusive ULTRA
More informationFigure 3. 1 Nutating Disc with R-10 register
Principle of Operation Liquid enters a precision-machined chamber containing a disc which nutates (wobbles). The position of the disc divides the chamber into compartments containing an exact volume. Liquid
More informationFloat standard programme
Float standard programme A/M/K Dimension (mm):ø40 x 27 POM 18 1 20 0.9 22.5 0.8 26 0.7 T/C/I Dimension (mm): Ø30 x 44 27.5 1 30.5 0.9 34.5 0.8 39.5 0.7 R/S/U Dimension (mm):ø30 x 44 NBR 19.5 1 22 0.9 24.5
More informationEPIC J3413. Uniclass L L2123. CI/SfB (52.5) In6. The most advanced drainage system of its kind. ACO Qmax. Hydraulics and Legislation
Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) In6 The most advanced drainage system of its kind ACO max Hydraulics and Legislation ACO max System HYRAULICS & LEGISLATION Overview Channel drainage hydraulics
More informationDraeger-Tubes and accuro Pump
Draeger-Tubes and accuro Pump Trusted Technology that s ahead of its time Accurate Easy to read Flexible Fast Specific Easy to use Maintenance free Multi-Gas Detector accuro pump One handed operation What
More informationDESCRIPTION ASTM 1418 ISO/DIN 1629 Page. SBR Styrene Butadiene Rubber SBR SBR 6. NR Natural Rubber NR NR 6
CALVOSEALING Plancha Rubber Sheet de caucho Elastomer: CALVOSEALING offers a wide range of rubbers for use in general industry. Our company is able to offer 10 types of elastomers where each one offering
More informationCHEMICAL RESISTANCE TABLE
CHEMICAL RESISTANCE TABLE The chemical medias being handled by elastomer tank linings are increasing in number and diversity. To assist in the selection of the proper elastomeric lining for various chemicals,
More informationSurface drainage systems introduction. Area (m2) Fig. 4 31,5 28,5 25,5 22,5 19,5 16,5 13,5 10,5 7,5 4,5 1,5
31,5 30 125 mm/hours 100 mm/hours 75 mm/hours 28,5 27 25,5 24 22,5 50 mm/hours 40 mm/hours 21 19,5 18 16,5 15 13,5 12 7. catch BaSinS covers GrillS 8. rainwater GullieS Area (m2) Total discharge qt (l/sec)
More informationSP-100 Equipment Wash SP-110 Tool Cleaner SP-120 Internal Storage Lubricant
DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.
More information60W - Wafer style resilient seated butterfly valve 60L - Lugged style resilient seated butterfly valve Cartridge Seat Design
60W - Wafer style resilient seated butterfly valve 60L - Lugged style resilient seated butterfly valve Cartridge Seat Design Features and Benefits Suitable for high pressure and full vacuum service due
More informationAppendix F: Hazardous Gases and Vapors
Appendix F: Hazardous Gases and Vapors The following pages contain excerpts from the National Fire Protection Association (NFPA) publication NFPA 497M Classification of Gases, Vapors, and Dusts for Electrical
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationPolystone M (UHMW-PE) Shaping the Future through Innovation.
(UHMW-PE) Shaping the Future through Innovation. Innovation. 11/2015 Competence. Quality. Semi-Finished Thermoplastics Röchling A World Leader in Engineering Plastics Röchling World Leader in Engineering
More informationAP* CHEMISTRY EQUATIONS BY TYPE
AP* CHEMISTRY EQUATIONS BY TYPE Double Replacement 1. Hydrogen sulfide is bubbled through a solution of silver nitrate. 2. An excess of sodium hydroxide solution is added to a solution of magnesium nitrate.
More informationFilament wound Plastic Self-lubricating Bearings
Filament wound Plastic Self-lubricating Bearings Filament wound Plastic Self-lubricating Bearings CSB-CRB: Glass fiber epoxy-impregnated with PTFE and high strength fibers CSB-CRG: Glass fiber epoxy-impregnated
More informationProduct Shelf Life/Expiration Date Policy
Acetic Acid 99.7% Glass and Polyethylene 24 Acetic Acid Dilutions Glass and Polyethylene 24 Acetone >99.5% Polyethylene 36 Acetone >99.5% Metal 12 Acetone 85% / IPA 15% Blend Polyethylene 18 Ammonium Chloride
More informationIndustrial Elastomer Coatings
Industrial Elastomer Coatings Rubber Coatings a safeguard against corrosions and abrasion Rubber is chemically resistant to most corrosive liquids, hydrocarbon, gases, salt water, ozone and UV light, commonly
More information- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
More informationCHEMICAL RESISTANCE CHART FOR PROTECTOWIRE EPC JACKET MATERIAL
CHEMICAL RESISTANCE CHART FOR PROTECTOWIRE EPC JACKET MATERIAL Acetaldehyde D Ammonia, liquid Acetamide D Ammonia Nitrate B Acetate Solvent D Ammonium Bifluoride Acetic Acid, D Ammonium Carbonate Glacial
More informationDuriron and Durichlor 51M
Duriron and Durichlor 51M D/D 51M Bulletin A/2l High Silicon Iron Introduction History Chemical Composition High silicon iron has been serving the chemical process and related industries for over 85 years.
More informationCHEMICAL MIXING COMPATIBILITY TABLE AND CHART
CHEMICAL MIXING COMPATIBILITY TABLE AND CHART College of Charleston Charleston, SC October 2012 Chemical Mixing Compatibility Substances in the left column (Column A) should be stored and handled so that
More informationtech.topic Chemical Resistance of Polyethylene Chemical or Solvent Concentration
Chemical or olvent Concentration Acetaldehyde 100% O Acetic Acid (Glacial) Conc. O Acetic Anhydride Acetic Acid 1-10% Acetic Acid 10-60% O Acetic Acid 80-100% O Acetone Acetone 100% Acrylic Emulsions Allyl
More informationNO: AC.2006.CT.01. Office:Unit10-11,3 rd Floor,N.6,Nader Alley,Vali Asr St,Tehran,Iran. Tel: +98(21) ,Tel/Fax: ,Post Cod:
NO: AC.2006.CT.01 Asia Composite Co. (Knowledge Base) SPECIFICATIONS OF GRP/FRP LADDER-TYPE CABLE TRAYS THE PULTRUSION PROCESS Pultrusion is a manufacturing process for producing continuous lengths of
More informationKYNAR (PVDF) Chemical Compatibility & Chemical Resistance Chart
KYNAR (PVDF) Chemical Compatibility & Chemical Resistance Chart Explanation of Footnotes 1. Satisfactory to 72 F (22 C) 2. Satisfactory to 120 F (48 C) Ratings -- Chemical Effect A = Excellent. B = Good
More informationFabrics for Flexible Connections
Value Based On Quality Fabrics for Flexible Connections toll-free 800.621.1207 fax 773.775.5065 www.ventfabrics.com Ventglas Recommended for Conventional HVAC Systems Ventglas, a heavy glass fabric, double-coated
More informationSeries FBE-4 Type Phenolic Epoxy Powders Fusion Bonded Epoxy. General Description: Powder Feature: Particle Size Distribution (% undersize):
General Description: FBE- Type Phenolic Epoxy FBE- pure primer epoxy powders are based on epoxy (Novolac) and phenolic resins. FBE- pure epoxy powder creates a coating with outstanding adhesion to metal,
More information3M Dyneon Fluoropolymers. Product Information. Dyneon solutions. for the Chemical Processing Industry
Fluoropolymers Product Information Dyneon solutions for the Chemical Processing Industry Fluoroplastics Chemical Resistance (Aging Duration of 1000 Hours) Chemicals Concen. % Temp. C PTFE & TFM Modified
More informationCompounds & Reactions Week 1. Writing Formulas & Balancing Equations. Write the chemical formula for each molecular (covalent) compound.
Compounds & Reactions Week 1 Name Writing Formulas & Balancing Equations Write the chemical formula for each ionic compound. 1. Lithium fluoride 2. Copper (II) chloride 3. Manganese (II) oxide 4. Potassium
More informationPossible Hazards for CHEM 106
Possible Hazards for CHEM 106 Calcium nitrate Aqueous ammonia Sodium phosphate Cobalt nitrate Cobalt chloride Sodium hydroxide Ammonium chloride Acetic acid Ferric nitrate Nitric acid Lead chloride Copper
More informationManufacturers declaration of performance
Trespa International B.V. P.O. Box 110, 6000 AC Weert Wetering 20, 6002 SM Weert, The Netherlands Tel.: 31 (0) 495 458 358, Fax: 31 (0) 495 458 570 www.trespa.com Manufacturers declaration of performance
More informationCHEMCAST is the only high quality acrylic sheet that can provide you with short runs capability and color selection to fit your specific needs.
INTRODUCTION What makes CHEMCAST acrylic sheet notably different is: CHEMCAST is the only high quality acrylic sheet that can provide you with short runs capability and color selection to fit your specific
More informationDRUM PUMP CHEMICAL RESISTANCE GUIDE AND APPLICATION WORKSHEET
DUM PUMP CHEMICAL ESISTANCE GUIDE AND APPLICATION WOKSHEET TECHNICAL BULLETIN TPS-10709 The information contained in this Drum Pump Chemical esistance Guide is to be used only as a general guide for proper
More informationEuropean Pharmacopoeia Solutions
European Pharmacopoeia Solutions European Pharmacopoeia Solutions Reagecon, as a specialist manufacturer of laboratory reagents has now introduced the range of Reagents and Standard solutions in Chapters
More informationWeir Valve Selections
Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless
More informationAheAd OF the FlOw. Butterfly Valves
Catalog C-BFV-0912 AheAd OF the FlOw Butterfly Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationINTRODUCTION. 1
INTRODUCTION WALWORTH is one of the most important industrial valve manufacturers in Mexico and the world. Founded in 1842, WALWORTH has dedicated itself to the design and manufacture of an array of valves
More informationROUND SECTION BELTING
ROUND SECTION BELTING PRODUCTS & APPLICATIONS For drives with Optibelt plastic round section belting Product description A 82 yellow Applications with small idler pulleys flexible at low temperatures,
More informationTechnical Information
92 02.7 Technical Information 94 95 96-97 98-99 100-101 102 103 104-105 106 107 108-109 110-111 112 113 114-115 NOTE: The information in this technical chapter is intended as a guide only. For specific
More informationwww.polyvalveusa.com 1 Why use Polyvalve Poly-Gas Valves? Polyvalve Poly-Gas valves are everything you d expect from the company that invented polyethylene valves. Millions of Polyvalve Poly-Gas valves
More informationIron filings (Fe) 56g IRON + SULPHUR IRON SULPHIDE
W.S.51. Chemical reactions. All of the different materials around us have been formed by chemical reactions from about one hundred simple elements. The diagram below shows a chemical reaction between the
More informationCastrol Braycote 601 EF
Castrol Braycote 601 EF Technical Data Sheet Description Castrol Braycote 601 EF is a smooth, buttery, translucent, off-white, NLGI #2 grease. Its base oil (Castrol Brayco 815Z) is a perfluorinated polyether,
More informationI n d u P r o AB. Measuring range (ppm) Detector tube name. Gas or vapour to be measured. Tube Code No.
Detector tube name Tube Code No. Gas or vapour to be measured Measuring range (ppm) No. Of Pump Strokes Shelf Life (year) Note TLV TWA, C (ACGIH) (ppm) Acetaldehyde SAT 4M Acetaldehyde 0 300 C5 Acetic
More informationDuPont Zytel 73G15HSL BK363
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationTechnical Data Sheet - PX3350
Product Manufacturer: LINE-X Franchise Development Company 6 Hutton Centre Drive, Suite 500 Santa Ana, CA 92707 GENERAL PRODUCT DESCRIPTION: PX - 3350 is a two components, 100% high performance aromatic
More informationCHEMICAL RESISTANCE GUIDE
CHEMICAL RESISTANCE GUIDE INTRODUCTION This guide is offered as a general aid in selecting the appropriate materials used for a broad spectrum of aggressive chemicals routinely handled by the products
More information15A NCAC 02B.0269 is amended with changes without notice pursuant to G.S. 150B-21.5(a)(3) as follows: SECTION.0600 RIPARIAN BUFFER RESTORATION FUND
1 8 9 10 11 1 1 1 1 1 1 18 19 0 1 8 9 0 1 1A NCAC 0B.09 is amended with changes without notice pursuant to G.S. 10B-1.(a)() as follows: SECTION.000 RIPARIAN BUFFER RESTORATION FUND 1A NCAC 0B.09 1A NCAC
More informationTest sticks and test papers for semi-quantitative determinations
QUANTOFIX test sticks for semi-quantitative determinations QUANTOFIX test sticks meet the most important requirements for a modern quick-test: rapid dip and read convenient the analysis can be carried
More informationDONIT 4AS Specialy designed anti-stick coating A CLEVER CHOICE GRAFILIT IQ
DONIT 4AS Specialy designed anti-stick coating A CLEVER CHOICE GRAFILIT IQ / DONIT A clever choice A special engineered high quality sheet made of expanded natural graphite foil and reinforced by an expanded
More informationDuPont Hytrel 3078 THERMOPLASTIC POLYESTER ELASTOMER PRODUCT INFORMATION. Product Information
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationSPECIFICATIONS OF PULTRUDED LADDER-TYPE CABLE TRAYS
SPECIFICATIONS OF PULTRUDED LADDERTYPE CABLE TRAYS Office: Unit 17, 6th floor, No., Between Sheikh Bahaie and shiraz st, Mullasadra st, TehranIran Tel: +98 2122942856 Mobile: +98 938 560 1212 Email :info@mtgroup.ir
More informationLow mg/m
1 (7) CWA-9.2.3 Nerve Blister Library specified agents GA, GB, GD, GF VX HD L Low mg/m 3 0.1 0.1 2 2 Library unspecified agents/cases Nerve precursors Vesicant precursor - - s in hazardous concentration
More informationDuPont Zytel 70G30L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationCHEMICAL RESISTANCE GUIDE
CHEMICAL RESISTANCE GUIDE This guide is offered as a general aid in selecting the appropriate materials used for a broad spectrum of aggressive chemicals routinely handled by the products we manufacture.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ENVIRONMENTAL CONSERVATION LABORATORIES JACKSONVILLE 4810 Executive Park Court, Suite 111 Jacksonville, FL 32216 Lori S. Mangrum Phone: 904 296 3007 Email address:
More informationButterfly valve VZAV
Butterfly valve VZAV Content 1 General Information VZAV... 3 2 Order Information VZAV... 4 2.1 Modular System... 4 2.2 Part No. types... 4 3 Type code VZAV... 5 4 Technical Data... 7 4.1 General technical
More informationSP-100 Equipment Wash SP-110 Tool Cleaner
DESCRIPTION: ADVANTAGES: USES: APPLICATION: SP-4888 Damp Surface Coating is a two-component epoxy coating developed specifically for application on wet or damp steel surfaces. In addition, it may be applied
More informationCHEMSET 801 XTREM TECHNICAL DATA SHEET. Fast Setting Vinyl Ester For Extreme Anchoring Applications
Date of Issue: April 27, 2016 Fast Setting Vinyl Ester For Extreme Anchoring Applications CHEMSET 801 XTREM is a heavy duty Vinyl Ester mortar certified for challenging engineering design conditions such
More informationHAIR INTERCEPTORS GENERAL INFORMATION PICTORIAL INDEX HAIR INTERCEPTORS. OPTIONS and VARIATIONS TYPICAL INSTALLATIONS
HAIR INTRCPTORS GNRAL INFORMATION Zurn has solids interceptors which are specifically designed for hair (Z1175 and Z1176). PICTORIAL INDX HAIR INTRCPTORS Z1175 Hair Interceptor Z1176 Hair Interceptor OPTIONS
More informationEpoxy.com Product #15 Chemical Resistant Epoxy Resurfacing System
GENERAL DESCRIPTION Epoxy.com Product #15 Chemical Resistant Epoxy Resurfacing System Epoxy.com Product #15 is a two component, seamless 100% solids epoxy clear resurfacing system with High Chemical Resistance.
More information1st Pass 1st Pass 1st Pass 2nd Pass 2nd Pass. 1st Pass 1st Pass 1st Pass 2nd Pass 2nd Pass
Gas Adsorbent Media Selection Guide Selection by Application Type Note 1: Many applications with heavy loading levels and mixed contaminants may require the use of two or more types of adsorbent medias
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationKRION LUX Version Revision 15/04/2015 Ref. FDT0001en Cancels and replaces: Version 8 KRION LUX
Version 8.1 - Revision 15/04/2015 01 PRODUCT NAME/MANUFACTURER Product name: Company: SYSTEMPOOL S.A. Ctra. Villarreal - Puebla de Arenoso (CV-20), Km. 1 - P.O./Box 372 12540 Villarreal (Castellón) SPAIN
More information- - Table 1. Examples of alternative devices and chemicals (NIOSH, 2006)
- - - - - - Table 1. Examples of alternative devices and chemicals (NIOSH, 2006) Toxic chemicals/equipment Mercury thermometers Mercury barometer Methyl orange or methyl red Lead chromate p-dichlorobenzene
More informationWork Surface Specification
Work Surface Specification LABORATORY CASEWORK SECTION: 2.6 WORK SURFACES A. Epoxy Resin Work Surface: 2. Materials and Fabrication: a. General: Material shall be a monolithic, filled epoxy resin product
More informationCorporate Headquarters 525 West Highway 20 Michigan City, IN Phone: Fax:
Executive Offices 2501 S Front Street Philadelphia, PA 19148 Phone: 215.339.5370 Fax: 800.962.3312 Corporate Headquarters 525 West Highway 20 Michigan City, IN 46360 Phone: 800-365-6726 Fax: 800-627-0008
More informationPlastic Metal Adhesives / Sealants Applications
Plastic Metal Applications Many different materials may be reliably and durably bonded to themselves and among each other, e.g.: iron, steel, hard metal, bronze aluminium, brass and copper glass and ceramics,
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationVersamid 280 B-75. Technical Data Sheet. Properties. Applications. Product Description or liquid epoxy resins.
Technical Data Sheet Versamid 280 B-75 Product Description Key Features & Benefits Chemical Composition Versamid 280 B-75 is a polyamide/epoxy adduct in n-butanol designed for reaction with solid or liquid
More informationTechnical Data Sheet Chemical resistance of Grilon, Grilamid, Grilamid TR, Grivory GV and Grivory HTV
Technical Data Sheet Chemical resistance of Grilon, Grilamid, Grilamid TR, Grivory GV and Grivory HTV Plastics play a key role, both in industry and in everyday life. It is, however, extremely important
More informationPolyethylene High Integrity Container Overpack Handling Procedure
Polyethylene High Integrity Container Overpack Handling Procedure Revision 14 Authored By: Signature on File 5/5/08 Carl McGovern, Principal Engineer Date Reviewed By: Signature on File 5/12/08 Sam Pearson,
More informationSERIES FLANGED BALL VALVES.
4000 SERIES FLANGED BALL VALVES www.americanvalve.com Industry-Leading Innovation American Valve commits itself to consistently fulfilling our customers' needs and expectations by supplying products that
More informationspecial male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions
82-200 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft
More informationIndustry Leading Innovation. Family of 4000's FLANGED BALL VALVES SERIES
Industry Leading Innovation Family of 4000's FLANGED BALL VALVES 4000 SERIES Industry Leading Innovation QUALITY STATEMENT American Valve commits itself to consistently fulfilling our customers' needs
More informationMAHESH TUTORIALS I.C.S.E.
ICSE X MAES TUTORIALS I.C.S.E. Marks : 80 Exam No. : MT/ICSE/I SPA 033SUBJECT : CEMISTRY Time : 2 hrs. Topics : Sulphuric acid, Ammonia, Analytical Chemistry, Organic Chemistry Cl, Nitric acid, Metallurgy
More informationLABORATORY TURNAROUND TIMES AND CHARGES
LABORATORY TURNAROUND TIMES AND CHARGES The enclosed prices reflect a 5 business day turnaround time. There will be a $25.00 minimum charge per report. Same Day Rush 24 Hour Rush 48 Hour Rush 72 Hour Rush
More informationCLARKSON SLURRY KNIFE GATE VALVES KGA
The Clarkson slurry knife gate valves feature heavy-duty, full port elastomer sleeves offering the ultimate isolation against heavy slurries FEATURES Meets a wide range of abrasion, corrosion, temperature,
More informationKem-Tuff. CHEMICAL AIR TRANSFER SYSTEMS by GDS Manufacturing Co.
CHEMICAL AIR TRANSFER SYSTEMS by GDS Manufacturing Co. Acid Exhaust System SEMICONDUCTOR FACILITY This lateral is installed in a sub fab that serves as a clean air return. Tool hook-up can be performed
More informationNAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and
More informationEquipment That Needs A Permit From The SCAQMD
Equipment That Needs A Permit From The SCAQMD In general, SCAQMD Permits to Construct and/or Operate are required to operate, build, erect, install, alter or replace any equipment, the use of which may
More informationSOLVENT PROPERTIES Typical Physical Properties of More than 120 Commonly Used Organic Solvents
SOLVENT PROPERTIES Typical Physical Properties of More than 20 Commonly Used Organic Solvents TECH DOC Nexeo Solutions is a leading distributor of solvents manufactured by the top suppliers across North
More informationD =? D = M = 10 g = 5 g/cm 3 M = 10 g V 2 cm 3 V = 2 cm 3 5 g/cm 3
Using the formula for density, answer the following calculation problems. M D = (g/ml or g/cm 3 ) Density = Mass D = M M = (g) Volume V D V V = (ml or cm 3 ) For all of your problems, please complete them
More informationANACONDA METAL HOSE ANACONDA METAL HOSE
ANACONDA METAL HOSE ANACONDA METAL HOSE ANACONDA metal hose is the leader in the fl exible hose fi eld since our beginning in 1908. ANACONDA stands for a complete line of fl exible products, such as corrugated
More informationIntroduction to Chemical Plant Design Life Cycle
Introduction to Chemical Plant Design Life Cycle Process Safety Consideration Chemical Plant Design A project/endeavour/task to determine the structure of a process to produce a product in the way that
More informationSensor Technologies used in Portable Gas Monitors. HA University
Sensor Technologies used in Portable Gas Monitors HA University Multi-gas & Single-gas Monitors Today s gas monitoring equipment has come a long way from the miner s canary. Workers need to have a personal
More informationFormula & Equation Writing
Formula & Equation Writing Book 2 H H Al Al H Al(H) 3 H Ionic Equations Ionic Formulae Balanced Equations Formula Equations Word Equations Transition Metals Using Brackets Awkward Customers More than 2
More informationPlastic Deep-Groove Ball Bearings
Deutsche Star Plastic Deep-Groove Ball Bearings RE 82 93/1.98 RE 82 93/1.98 1 STAR Plastic Deep-Groove Ball Bearings Plastic Deep-Groove Ball Bearings Structural Design Inner/outer race polyacetal Cage
More information