OPTIMIZE YOUR INJECTION PROCESS
|
|
- Emil Lynch
- 6 years ago
- Views:
Transcription
1 FOR PLASTICS MOLDING PROCESSES OPTIMIZE YOUR INJECTION PROCESS MATERIAL FORMING SIMULATION
2 2 Boost your R&D and Reduce Production Costs SHORTEN CYCLE TIME Use REM3D to determine optimum packing time for minimum warpage. IMPROVE MOLD DESIGN Use REM3D to determine the best position for runners, coolers and/or heating cartridges. OPTIMIZE YOUR INJECTION PROCESS Use REM3D to determine the inner pressure and consequently optimize the clamping force. OPTIMIZE YOUR EXPANSION PROCESS Use REM3D to determine the best balance of foam polyurethane filling and find out the optimal weight for ideal filling. Free Surface Flow Automatic Anisotropic Adaptive Meshing Navier-Stokes Rheological Fully Parallelized Coupled Thermal Chemical With the best results accuracy on the market you can validate and optimize your complex polymer injection processes with unlimited number of materials. Using 3D finite elements resolution, REM3D simulates full injection cycle of thermoplastics or thermosets molding processes. Fibers Orientation
3 3 Injection-Expansion Foam Simulation 100 Part s Filling (%) 80 Only Expansion Injection- Expansion Injected Mass (kg) Filling Time (s) FOR AUTOMOTIVE APPLICATIONS: DETERMINE WITH REM3D THE MINIMUM MASS FOR FULL FILLING, IDEAL VENTING OR INSERTS POSITIONS. OPTIMIZE THE BALANCING PROCESS AND THE FINAL DENSITY DISTRIBUTION ANYWHERE IN THE PART. Bumper Door panel Dashboard Seat Acoustic & thermal noise protection
4 4 Unmatched Remeshing Technology Gas assisted injection molding of a door handle WITH ITS UNIQUE AAA* REMESHING TECHNOLOGY, REM3D GIVES A TRUE PICTURE OF THE POLYMER FLOW. VALIDATE AND OPTIMIZE THE MOST CHALLENGING PROCESSES. THIS MESHING TECHNOLOGY GUARANTEES AN EXTREME SHARPNESS WHEN SHOWING THE FLUID FLOW. Prediction of : Polymer residual thickness Open shrinkage Shrinkage and warpage Cooling effect Air trap Gate location *AAA: AUTOMATIC-ANISOTROPIC-ADAPTIVE Courtesy of Short shot of electrical housing injection molding (in white). Comparison with the simulation results (in red).
5 5 Accurate representation of Heat Description & Fibers Orientation Courtesy of With REM3D, predict the fibers orientation during the filling stage and after part ejection. Gain insight using the unique & comprehensive ellipsoid tensor visualization and capture fibers orientation from core to skin. Foot component of a piece of furniture EFFICIENT HEAT DESCRIPTION ESSENTIAL FOR HEAT / RHEOLOGY COUPLING standard isotropic mesh with same number of nodes: adapted mesh increased thermal accuracy
6 6 High Performance Computing Proven real-world accuracy: REM3D simulates your planned or existing injection processes with unmatched accuracy. It enables to confidently make planning and production decisions and avoid unpleasant surprises. Performance and scalability: REM3D is based on a performance-optimized architecture and can be deployed on one or many processor cores, providing the level of simulation power you need without limitation! Computation time X2 FASTER X4 FASTER X6 FASTER 8 cores 16 cores 32 cores 64 cores Computation time versus number of computer cores Easy setup and accessibility: REM3D intuitive user interface makes it easy to model your process environment and quickly begin running injection simulations. REM3D offers unlimited access to graphical user interface for pre- and post-processing which means that simulation results can be analyzed from as many computers as needed.
7 7 Applications Water Assisted Injection Molding Gas Assisted Injection Molding Co-Injection Thermoplastics Thermosets Foam Injection & Expansion Fiber Reinforced Injection Molding Overmolding Sheet Molding Compound Bulk Molding Compound All Multi-Material Processes Flow balancing in extrusion dies Flow GAIM Process Foam Molds WAIM Underfilling Molding Polymer Fibers Optimization Polyurethane Improvement Shrinkage Warpage Orientation Expansion Co-Injection Simulation
8 TRANSVALOR Products and a premium service based on 30 years experience Products on the cutting edge of research and technology TRANSVALOR is a world leader for simulation software in the field of material forming. Thanks to an ongoing R&D policy and a partnership with CEMEF, Center of Material Forming (Mines ParisTech), TRANSVALOR software is always on the cutting edge of technology. Over 500 customers worldwide, including the major automotive, aeronautical and energy players as well as prestigious universities, trust TRANSVALOR and its software products, thereby guaranteeing their efficiency and reliability. A team of experts at your service to perform your simulations TRANSVALOR S.A. Your requirements effectively translated Based on exchanges with your specialists, TRANSVALOR will translate your industrial requirements in terms of digital simulation to accurately describe our proposed service. Our offer will match your requirements as closely as possible in terms of lead times, budget and expected results. Analyzed and interpreted results Throughout the study, we maintain contact with you to keep you informed of the project s progress. On completion of the study, we present our main conclusions to you via a Web conference. At your request, we can also provide you with the resulting files and the means with which to analyze them. Parc de Haute Technologie 694, avenue du Dr. Maurice Donat Mougins Cedex - France Phone: +33 (0) Fax: +33 (0) sales@transvalor.com Unique resources at your disposal For the delivery of your service, we provide you with: TRANSVALOR s expertise in simulation the most recent software versions latest hardware technology Advice and training TRANSVALOR can also provide you with support to allow you to gain proficiency in the aspects highlighted during the execution of your study. You can benefit from tailored thematic training either on your company premises, on TRANSVALOR premises, or via Web conference. TRANSVALOR HAS BEEN CERTIFIED ISO 9001: 2008 BY THE BUREAU VERITAS CERTIFICATION FOR THE DEVELOPMENT, INDUSTRIALISATION AND LICENSING OF COMPUTED-AIDED ENGINEERING SOFTWARE AND RELATED SERVICES. THIS CERTIFICATION SHOWS THE WILL OF TRANSVALOR TO PROGRESS AND TO ANSWER BETTER ITS CUSTOMERS EXPECTATIONS. FORGE - COLDFORM - THERCAST - REM3D are registred trademarks of TRANSVALOR S.A. - non-contractual Document - Design Emmanuel Briot - PrintCentre - EN_OCT2017
PLASTURGIE DU FUTUR September 2016 Paris Dashboard
PLASTURGIE DU FUTUR September 2016 Paris MASTERCLASS LIGHTWEIGTHING & RESISTANCE CONTRIBUTION OF SOFTWARE TO THE PREDICTION OF FINAL IN-USE PROPERTIES Dr Richard DUCLOUX Directeur Applications Clients
More informationPlastics made perfect.
Plastics made perfect. Plastic injection molding simulation of an electric hedge trimmer. Designed in Inventor software. Simulated in software. Rendered in 3ds Max software. Validation and Optimization
More informationTHERMO-MECHANICAL FATIGUE ANALYSIS ON FORGING TOOLS
THERMO-MECHANICAL FATIGUE ANALYSIS ON FORGING TOOLS STÉPHANE ANDRIETTI DIRECTOR OF SOFTWARE PRODUCTION DEPARTMENT TRANSVALOR SA - FRANCE OUTLINE INTRODUCTION DIE WEAR MODELING CASE STUDY#1 : CONSTANT VELOCITY
More informationDemonstration of an Effective Design Validation Tool for 3D Printed Injection Molds (3DPIM)
Validation Tool for 3D Printed Injection Injection molding, the process of injecting plastic material into a mold cavity where it cools and hardens to the configuration of the cavity, is one of the world
More informationMore. with 3M Glass Bubbles. High-strength additives for reduced part weight, improved dimensional stability, enhanced processing and much more.
3M Glass Bubbles For Resin Systems Injection molding image courtesy of AP Plasman. Do More with 3M Glass Bubbles High-strength additives for reduced part weight, improved dimensional stability, enhanced
More informationOptimization of the injection molding process MOLDFLOW SIMULATIONS
Optimization of the injection molding process MOLDFLOW SIMULATIONS Mark Klarenbeek m.klarenbeek@pezygroup.com November 17 th 2016 LinkedIn Agenda Pezy Group Accelerating innovation Introduction injection
More informationESI s Composites Simulation Solution
ESI s Composites Simulation Solution Integrated solution to simulate the manufacturing of structural composites components Dr. Xiaoshi Jin November 2015 1 Copyright ESI Copyright Group, 2015. ESI Group,
More informationPREVENT AND CORRECT MANUFACTURING DEFECTS OF COMPOSITE STRUCTURAL PARTS
PREVENT AND CORRECT MANUFACTURING DEFECTS OF COMPOSITE STRUCTURAL PARTS www.esi-group.com Manage Each Step of the Composites Manufacturing Chain with PAM-COMPOSITES PAM-COMPOSITES allows you to define
More informationNews Release. First Composite Parts plus Application Service. K 2013 Trade press conference June 25 and 26 in Ludwigshafen, Germany
News Release June 25, 2013 P 295/13e Sabine Philipp Phone: +49 (0)621 60-43348 sabine.philipp@basf.com K 2013 Trade press conference June 25 and 26 in Ludwigshafen, Germany First Composite Parts plus Application
More informationTwo-Shot Molding of Thermoplastic Elastomers
Two-Shot Molding of Thermoplastic Elastomers By R.J. Digiantonio INTRODUCTION Injection molding is a major processing method for both thermoplastics and thermoplastic elastomers (TPEs). Approximately 35%
More informationAutodesk Simulation Moldflow Adviser Essentials
Autodesk Simulation Moldflow Adviser Essentials Course Length: 3 days In this training course, students learn features, functionalities and workflows in Autodesk Moldflow Adviser through hands-on exercises.
More informationBehaviors of QFN Packages on a Leadframe Strip
Behaviors of QFN Packages on a Leadframe Strip Eric Ouyang, Billy Ahn, Seng Guan Chow, Anonuevo Dexter, SeonMo Gu, YongHyuk Jeong, JaeMyong Kim STATS ChipPAC Inc 46429 Landing Parkway, Fremont, CA 94538,
More informationfor improved compounding optimizing processing performance
Advanced Polymer Architecture for improved compounding optimizing processing performance For 5 years, Viton fluoroelastomers have been the polymers of choice for reliable sealing. Bisphenol curable copolymers
More informationMold Design Guide. Geon Vinyl Molding Compounds
Mold Design Guide Geon Vinyl Molding Compounds Mold Design Guide For Geon Vinyl Rigid Molding Compounds Table of Contents INTRODUCTION....................................................2 MATERIAL SELECTION.............................................3
More informationANALYSIS OF TEMPERATURE INFLUENCE ON INJECTION MOLDING PROCESS
Proceedings in Manufacturing Systems, Volume 11, Issue 2, 2016, 95 100 ISSN 2067-9238 ANALYSIS OF TEMPERATURE INFLUENCE ON INJECTION MOLDING PROCESS Karel RAZ 1,*, Martin ZAHALKA 2 1) PhD, Lecturer, Eng.,
More informationProduct information. Hotrunner solutions for applications in the medical industry
Product information Hotrunner solutions for applications in the medical industry Hotrunner systems for the medical industrysolutions for a growing market The production of injection-moulded thermoplastic
More informationINJECTION MOLDING DESIGN GUIDELINES
INJECTION MOLDING DESIGN GUIDELINES INJECTION MOLDED PARTS Injection molding is used for manufacturing a wide variety of parts, from small components like AAA battery boxes to large components like truck
More informationImproving DLFT Molding Productivity Via Lessons Learned in Non-automotive Applications
Improving DLFT Molding Productivity Via Lessons Learned in Non-automotive Applications Darin Grinsteinner Engineering Manager CPI Binani Inc., Winona, MN Outline DLFT Process Briefing Auto Applications
More informationAnalyzing & Testing. Guarded Hot Plate - GHP. Method, Instrumentation, Applications. GHP 456 Titan. Leading Thermal Analysis
Analyzing & Testing Guarded Hot Plate - GHP Method, Instrumentation, Applications GHP 456 Titan Leading Thermal Analysis GHP 456 Titan - Guarded Hot Plate System GHP 456 Titan - Principle of Operation
More informationWorkshop Series 2016
Workshop Series 2016 Hands-on Approach to Cycle Time Reduction and Productivity Improvement Vishu Shah, Consultek Consulting Group April 21, 2016 ENGEL North America California Technical Center Corona
More informationStandard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics 1
Designation: D 955 00 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics 1 This standard is issued under the fixed designation D 955; the number immediately following the
More informationImplementation of the MuCell Process in Commercial Applications. Authors: Levi Kishbaugh (Trexel Inc.), Uwe Kolshorn (Trexel GmbH)
Implementation of the MuCell Process in Commercial Applications Authors: Levi Kishbaugh (Trexel Inc.), Uwe Kolshorn (Trexel GmbH) PRESENTOR BIOGRAPHY: Dr. Hartmut Traut received his Master of Business
More informationTable of Contents. Robert A. Malloy. Plastic Part Design for Injection Molding. An Introduction ISBN:
Table of Contents Robert A. Malloy Plastic Part Design for Injection Molding An Introduction ISBN: 978-3-446-40468-7 For further information and order see http://www.hanser.de/978-3-446-40468-7 or contact
More informationIn cooperation with. Window Encapsulation Window encapsulation from development to series production. Engineering Passion
In cooperation with Window Encapsulation Window encapsulation from development to series production Engineering Passion A tour round the plant Window encapsulation Intuitive operating software Programming
More informationBoost Your Digital Journey with SAP MaxAttention
SAP Service and Support Boost Your Digital Journey with SAP MaxAttention Today s economy is a digital economy where nearly everything and everyone is connected. For businesses like yours, the opportunities
More information11/ Photos: VWS - VE photo library. Contact: as well by our range of Software & Services.
chemise_gb 20/02/07 17:05 Page 1 VEOLINK Your contact: All the way through VEOLINK Com VEOLINK Tech VEOLINK Advanced Control VEOLINK Star VEOLINK Data Base VEOLINK Maintenance VEOLINK Pro VEOLINK Expert
More informationENGEL trend.scaut America 2016
The latest in automotive injection molding technologies ENGEL trend.scaut America 2016 York/PA May 2016 To present the latest trends in automotive molding technologies, ENGEL is inviting automotive industry
More informationANSYS, Inc. March 12, ANSYS HPC Licensing Options - Release
1 2016 ANSYS, Inc. March 12, 2017 ANSYS HPC Licensing Options - Release 18.0 - 4 Main Products HPC (per-process) 10 instead of 8 in 1 st Pack at Release 18.0 and higher HPC Pack HPC product rewarding volume
More informationGlobal Partners in Plastics
THE K-TEC SERIES400 to 4,500 kn Global Partners in Plastics K-TEC High Performance Injection Molding Machines Exceptional precision and repeatability, fast cycle times, high injection rates and pressure,
More informationLightweighting strategies with Chemical Foaming of thermoplastic parts in Automotive Applications
Lightweighting strategies with Chemical Foaming of thermoplastic parts in Automotive Applications MATERIAUTECH LYON 30 TH JUNE 2015 Xavier Clément Clariant Masterbatches Automotive Europe 30.06.2015 2
More informationFiber-Reinforced Injection-Molded Plastic Parts: Efficient Calculation and Lifetime Prediction
Fiber-Reinforced Injection-Molded Plastic Parts: Efficient Calculation and Lifetime Prediction Michael Parrott e-xstream engineering, LLC MA5941 Class Description: Fiber-reinforced composites are increasingly
More informationManufacturer service provision
Manufacturer service provision For increased equipment durability COUV 187 A Maintenance packages The expertise of a single design, manufacture and maintenance supplier Since 1968, SOCOMEC has been developing
More information3M TM Dyneon TM Fluoropolymers. Additive Manufacturing with fully fluorinated polymers. The technology at a glance.
3M TM Dyneon TM Fluoropolymers Additive Manufacturing with fully fluorinated polymers. The technology at a glance. Introduction 03 3M pioneers 3D printing with PTFE. Additive Manufacturing is particularly
More informationPresenter Name Date INTRODUCING HONEYWELL EVANCE FACILITY MANAGER
Presenter Name Date INTRODUCING HONEYWELL EVANCE FACILITY MANAGER Problem Overview 1 Facility managers using Notifier systems find it difficult to effectively maintain and manage their systems Problem
More informationTRANSFORM. METAL REPLACEMENT by
TRANSFORM METAL REPLACEMENT by METAL REPLACEMENT by TRANSFORMING TODAY INTO TOMORROW Innovation in recent years has enabled manufacturers to substitute metals with plastics for countless numbers of applications
More informationContinuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications
Continuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications Thomas Smith, President TenCate Performance Composites Kipp Grumm, PE Advanced Development
More informationCONFORMAL COOLING IN ACTION
CONFORMAL COOLING IN ACTION New manufacturing techniques set the stage for more efficient cooling systems that reduce cycle time, warpage, and visual defects. The right idea for higher efficiency The faster
More informationINJECTION MOLDING OF PULSE ENGINEERING RESINS (unfilled & filled grades)
INJECTION MOLDING OF PULSE ENGINEERING RESINS (unfilled & filled grades) TECHNICAL INFORMATION Drying PC/ABS (polycarbonate/acrylonitrile butadiene styrene) resins are hygroscopic they absorb water from
More information(VOS) Initiative. The VERITAS, Oracle and Sun. Rapid Deployment. High Availability. Less Complexity. Problem Resolution
The VERITAS, Oracle and Sun (VOS) Initiative Rapid Deployment High Availability Less Complexity Problem Resolution www.vosinitiative.com The VERITAS, Oracle and Sun (VOS) Initiative A platform to build
More informationLifolit. Soft PVC processing guide
Lifolit Soft PVC processing guide CONTENTS INTRODUCTION INJECTION MOULDING GENERAL GUIDELINES INJECTION MOULDING - RECOMMENDED TEMPERATURE EXTRUSION GUIDELINES EXTRUSION - RECOMMENDED TEMPERATURES CONTACTS
More informationNew developments to Capture the Manufacturing Process of Composite Structures in LS-DYNA
New developments to Capture the Manufacturing Process of Composite Structures in LS-DYNA Gregor Knust, Thomas Klöppel, André Haufe, Christian Liebold DYNAmore GmbH, Stuttgart Oasys LS-DYNA Users Meeting
More informationComments on the Testing and Management of Plastics Material Data
Comments on the Testing and Management of Plastics Material Data Hubert Lobo DatapointLabs + Matereality automotive CAE Grand Challenge 2014 15 th 16 th April, 2014 1 Introduction to the companies + technical
More informationIncredible color, electrically conductive plastics, custom compounding these are Delta Kunststoffe s specialties. We do all our manufacturing at a
2 Incredible color, electrically conductive plastics, custom compounding these are Delta Kunststoffe s specialties. We do all our manufacturing at a cutting-edge facility in Weeze, Germany. Our products
More informationIndustrial IT : Optimization for the Cement Industry
Industrial IT : Optimization for the Cement Industry Optimize IT Expert Optimizer courier Optimize IT Expert Optimizer OPTIMIZED PROCESS Application Support Optimize IT Expert Optimizer Training Application
More informationMSC Nastran Desktop. The Future is Multidiscipline. Affordable for your Business. Tailored to Your Needs Affordable Easy to Use Scalable Powerful
The Future is Multidiscipline. Affordable for your Business. High Performance makes MSC Nastran, the leading structural FEA solution, accessible to worldwide innovative industries and engineers with diverse
More informationMonTech RP 3000 Rapid Plastimeter for Polymers and Natural Rubber
Plasticity 02 MonTech RP 3000 Rapid Plastimeter for Polymers and Natural Rubber The MonTech Rapid Plastimeter measures the plasticity or viscosity of polymers and unvulcanised rubbers. The test is simple,
More informationAbstract. 2. DesignofPartandCoolingChannels. 1. Introduction. Page 344
A Simulation Study of Conformal Cooling Channels in Plastic Injection Molding Omar A. Mohamed, S.H. Masood, Abul Saifullah Faculty of Engineering and Industrial Science, Swinburne University of Technology,
More informationDryflex WS H 2. O Hydrophilic Thermoplastic Elastomers
Dryflex WS H 2 O Hydrophilic Thermoplastic Elastomers CONTENTS INTRODUCTION HOW DOES IT WORK? HOW MUCH DOES IT SWELL & HOW QUICKLY? % VOLUME SWELL DOES IT RETURN TO ITS ORIGINAL SIZE WHEN THERE IS NO LONGER
More informationJUST ADD LIQUID Quick guide to ColorMatrix liquid color for plastics and silicones
JUST ADD LIQUID Quick guide to ColorMatrix liquid color for plastics and silicones THE RIGHT COLORANT FOR YOU Understanding which colorant technology best suits your particular product application will
More informationPlastic Moulding. Optical Moulding Technical Moulding Formed-in-Place Gasketing. Plastic Moulding
Plastic Moulding Plastic Moulding Optical Moulding Technical Moulding Formed-in-Place Gasketing Designed and Manufactured in the UK Edition 2 01420 470400 www.fernhoward.com/plastic-moulding Fern-Howard
More information3M Advanced Materials Division 3M TM. Boron Nitride Cooling Fillers Smart Coolness for Excellent Performance
3M Advanced Materials Division Boron Nitride Cooling Fillers Smart Coolness for Excellent Performance 2 Boron Nitride Cooling Fillers 3M Advanced Materials Division Highly thermally conductive and electrically
More informationPress release. T-RTM fit for large series. KraussMaffei presents Thermoplastic Resin Transfer Molding (T-RTM) at K 2016
T-RTM fit for large series KraussMaffei presents Thermoplastic Resin Transfer Molding (T-RTM) at K 2016 Short cycle time for automotive demonstrator in hybrid design made of fibers, plastic and metal New
More informationSTRENGTH+ High Modulus Carbon Fiber Reinforced LNP. High performance compounds for structural healthcare applications
STRENGTH+ Stiffness High Modulus Carbon Fiber Reinforced LNP THERMOCOMP and LUBRICOMP Compounds High performance compounds for structural healthcare applications SABIC Founded in 1976, SABIC is today the
More informationLeading Automotive Supplier Accelerates Lean Operations with EnterpriseIQ
Leading Automotive Supplier Accelerates Lean Operations with EnterpriseIQ Automotive Suppliers Advantage Competing in an industry where a large number of suppliers vie for comparatively fewer customers,
More informationAvailable online at ScienceDirect. Procedia Engineering 81 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 81 (2014 ) 670 675 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress
More informationDryflex TPV. Thermoplastic Vulcanisate Compounds
Dryflex TPV Thermoplastic Vulcanisate Compounds CONTENTS INTRODUCTION SERIES OVERVIEW PRODUCT TESTING & PERFORMANCE What is TPV? Compression Set Behaviour TPV or TPS? GRADE TABLES Influence of Oil Dryflex
More informationPhoto. Materials Testing for Manufacturers and Retailers
Photo Materials Testing for Manufacturers and Retailers UL helps you bring safe, high performance materials to the market while protecting your brand When end-product manufacturers are searching for materials
More informationLogistics and Material Handling
Logistics and Material Handling Change how your distribution center operates with a trusted partner. Make the most of your energy SM Fundamentally change how your distribution center operates with expertise
More informationLOGISTIC SYSTEMS MADE DIFFERENT LOGISTIC SYSTEMS
LOGISTIC SYSTEMS MADE DIFFERENT LOGISTIC SYSTEMS HIGH-SPEED SYSTEMS HIGHER PRODUCTIVITY The investment in a new or upgraded material handling system is a major business decision. The system must not only
More informationAdvanced Materials. A new step forward in composites mass production
A new step forward in composites mass production Quarter 1, 2015 Table of contents Composites manufacturing Fast cure epoxy solutions System versatility NEW Process Dynamic Fluid Compression Molding (DFCM)
More informationSERIE 4. rapid, reliable, efficient
SERIE 4 rapid, reliable, efficient SERIE 4 Intuitive an machine 12/07/2014 15:23:00 1 35 C The power at your fingertips A NEW GENERATION OF INTERFACE The Serie 4 PA brings the benefit of a new intuitive
More informationDirk Ditschke Technical Specialist Simulation - EMEA
FoMT - Katowice Simulation Powering the Future of Making Things Dirk Ditschke Technical Specialist Simulation - EMEA 2015 Autodesk Building Successful Products: Harder Than Ever how to use FoMT to make
More informationCustom polyurethane foams: Uniquely versatile
Custom polyurethane foams: Uniquely versatile Custom polyurethane foams: Uniquely versatile Uniquely versatile No other foam system can rival polyurethane (PU) foams in terms of the variety of grades and
More informationPERSPECTIVES IN PLASTICS
PERSPECTIVES IN PLASTICS Welcome to the world of plastics of PiO Let s achieve things together! Our philosophy WE WOULD LIKE TO BE A RELIABLE PARTNER FOR OUR CUSTOMERS PiO is specialized in delivery and
More informationDS-200i. The New Standard in Mail Production. Folder Inserter. Join us on
Folder Inserter The New in Mail Production Join us on The New in Mail Production The highly productive folding inserting system processes an unprecedented variety of mail. The DS-200i meets the workflow
More informationIBM Systems Unleashing the power of a software defined infrastructure
IBM Systems Unleashing the power of a software defined infrastructure Learn how organizations in cancer research, speech recognition, financial services, automotive design and more are using IBM solutions
More informationRubber profiles for driver's cabins Standard solutions Custom-made solutions
Product catalogue Rubber profiles for driver's cabins Standard solutions Custom-made solutions MADE BY PROFESSIONALS - DESIGNED FOR PROFESSIONALS 2 Rubber profiles for driver's cabins AS-KA profile solutions
More informationAeris. Metals edition
Aeris Metals edition Outperforming expectations surprisingly intuitive The Metals edition of Aeris is PANalytical s X-ray PANalytical s engineers with their continuous drive to diffractometer for everyone.
More informationReview of Manufacturing Processes
Review of Manufacturing Processes ME 682 Dr. Han P. Bao Mechanical Engineering, ODU ME 682 Module 3 1 Engineering Materials The four major categories: Metal Plastics Ceramics Composites 1- Metals: Cast:
More informationGas injection moulding with carbon dioxide.
Engel Formenbau und Spritzguss GmbH. Gas injection moulding with carbon dioxide. Author Dipl.-Ing. Andreas Praller, Application Technology Plastics Industry at Linde AG Author René Himmelstein, Vice President
More informationCold Rooms Kide
COLD ROOMS Cold Rooms 2 Cold under control KIDE it is a business Group manufacturer of cold-rooms, insulation panels, insulated doors, refrigeration units and drying units, offering integral solutions
More informationSupplement. by WING SIEN FONG. October A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA
Report No. 51A REINFORCED PLASTICS Supplement A by WING SIEN FONG October 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION........................
More informationSafe, secure, and reliable energy for Oil & Gas operations. Protect your infrastructure with the PACiS energy management and control system
Safe, secure, and reliable energy for Oil & Gas operations Protect your infrastructure with the PACiS energy management and control system Dependable energy for your Oil & Gas operations Safety and reliability
More informationMicro Molds Case Study: Micro Mold for Medical Component By Justin McPhee, VP Engineering, Mold Craft, Inc.
Micro Molds Case Study: Micro Mold for Medical Component By Justin McPhee, VP Engineering, Mold Craft, Inc. The Challenge: Molding a pipette shaped part with a.015 wall x.372 long followed by a.008 wall
More informationInjection Molding An Introduction
Gerd Pötsch, Walter Michaeli Injection Molding An Introduction ISBN-10: 3-446-40635-2 ISBN-13: 978-3-446-40635-3 Leseprobe Weitere Informationen oder Bestellungen unter http://www.hanser.de/978-3-446-40635-3
More informationEffect of Fiber Orientation Anisotropies on the Structural Performance of Molded FRP Composite Parts
Effect of Fiber Orientation Anisotropies on the Structural Performance of Molded FRP Composite Parts Bruce Davis, Paul Gramann, Antoine Rios The Madison Group: Polymer Processing Research Corporation 505
More informationADVANCED COMPOSITES. Selector guide AIRCRAFT INTERIORS
ADVANCED COMPOSITES Selector guide AIRCRAFT INTERIORS Introduction SHAPING THE FUTURE OF COMMERCIAL AND CORPORATE AIRCRAFT INTERIOR COMPOSITES TenCate Advanced Composites offers market leading fire-retardant
More informationEffect of Differences Core and Cavity Temperature on Injection Molded Part and Reducing the Warpage by Taguchi Method
International Journal of Engineering & Technology IJET-IJENS Vol: 10 No: 06 133 Effect of Differences Core and Cavity Temperature on Injection Molded Part and Reducing the Warpage by Taguchi Method Z.
More informationBEST PRACTICES IN AP AUTOMATION
MINUTE READ TIME WHITE PAPER ACCOUNTS PAYABLE BEST PRACTICES IN AP AUTOMATION Consolidating Workflow Outside the SAP System www.esker.com BEST PRACTICES IN AP AUTOMATION Consolidating Workflow Outside
More informationWater System Sealing Solutions Potable Water NSF Standard 61 Listed Materials. Seals. ISO 9001 / QS 9000 Certified Catalog PSG-5025/USA NSF
Seals Water System Sealing Solutions Potable Water NSF Standard 61 Listed Materials ISO 9001 / QS 9000 Certified Catalog PSG-5025/USA Official ficial NSF International national Trademark NSF Official ficial
More informationCEAST HDT Vicat Series. Thermo-Mechanical Systems
CEAST HDT Vicat Series Thermo-Mechanical Systems CEAST HDT Vicat Series Thermo-Mechanical Systems Short-Term Effect of Temperature The thermal properties of plastic materials are equally as important as
More informationLARGE CAPACITY IN A COMPACT AND ERGONOMIC FORMAT FIXED TABLE TRAVELLING COLUMN MILLING MACHINES SLP
LARGE CAPACITY IN A COMPACT AND ERGONOMIC FORMAT FIXED TABLE TRAVELLING COLUMN MILLING MACHINES SLP 2 3 ERGONOMIC AND USER FRIENDLY The new generation of SORALUCE SLP brings the customer important improvements
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationLiquid-cooling on the Agilent SOC Series
Liquid-cooling on the Agilent 93000 SOC Series The Advantages for Testing and Cost of Test Abstract Semiconductor devices emit heat during operation. The operating temperature of the device affects circuit
More informationTrends in Adhesives and Tapes Bonding Dissimilar Materials Using Adhesives and Tapes
Trends in Adhesives and Tapes Bonding Dissimilar Materials Using Adhesives and Tapes By: Brent White, Global Marketing Manager and Shari Loushin, Senior Technical Service Specialist Structural Adhesives
More informationSORTEX B range. Optimising conventional sorting.
range. Optimising conventional sorting. . Optimising conventional sorting. Changing the game - demonstrating a commitment to help processors get the most value from optical sorting, Bühler's high capacity
More informationHiPath 3000 and HiPath 5000 flexible communication: Always one step ahead.
HiPath 3000 and HiPath 5000 flexible communication: Always one step ahead. www.hipath.com There s no doubt about it your company must have the best competitive positioning even in hard times. Investment
More informationDS-75 PRODUCTIVITY MADE EASY The advanced combination of productivity, versatility and convenience
DS-75 PRODUCTIVITY MADE EASY The advanced combination of productivity, versatility and convenience DS-75 PRODUCTIVITY MADE EASY Are you working in an environment where mail matters and response time is
More informationTELSTRA HOSTED SAP SOLUTIONS WITH ACCENTURE A SMARTER SAP SOLUTION
TELSTRA HOSTED SAP SOLUTIONS WITH ACCENTURE A SMARTER SAP SOLUTION TELSTRA HOSTED SAP SOLUTIONS WITH ACCENTURE ENHANCE YOUR ENTERPRISE RESOURCE PLANNING CAPABILITIES, DRIVE INNOVATION AND LOWER COSTS Innovate
More informationintegrated solutions in material handling
integrated solutions in material handling material handling, sampling and analysis Our innovation and commitment to the mining industry make us your integrated solutions partner. Our technologies, experience
More informationApplications. Partner in Automation
Applications Automata Partner in Automation 2 APPLICATIONS UNRESTRICTED QUALITY CONTROL. Every industrial automation sector can find a valuable partner in Cannon Automata. Thanks to the join of hardware,
More informationThermoplastic Single Ply & Multi-Ply Roofing Systems
Thermoplastic Single Ply & Multi-Ply Roofing Systems COMMERCIAL INDUSTRIAL INSTITUTIONAL RESIDENTIAL Specializing in Roof Solutions for over 25 years FlexRoofingSystems.com Thermoplastic Single Ply Roof
More informationWeld simulation in LS-DYNA and LS-PREPOST. Mikael Schill Anders Jernberg
Weld simulation in LS-DYNA and LS-PREPOST Mikael Schill Anders Jernberg LS-DYNA One code strategy Combine the multi-physics capabilities into one scalable code for solving highly nonlinear transient problems
More informationThermoplastic composite structural part for truck market application
Cécile DEMAIN Solvay R&I / EP APMD / Advanced Material Platform Thermoplastic composite structural part for truck market application - High-performance materials, - Simulation expertise - Innovative process
More informationNIRS DS2500 flour analyser
NIRS DS2500 flour analyser The NIRS DS 2500 analyser helps millers to boost yield by giving unique levels of accuracy regarding ash as well as highly accurate measurements of protein, moisture and colour.
More informationFour Ways Ketoprix Polyketone can Improve Gear Performance
Superior Creep Rupture Performance Quieter Operation Four Ways Ketoprix Polyketone can Improve Gear Performance Engineers have been using thermoplastic resins to produce gears used in assemblies for the
More informationSiemens PLM Software. Simcenter. The new era of engineering. siemens.com/plm/simcenter
Siemens PLM Software Simcenter The new era of engineering siemens.com/plm/simcenter 2 The Simcenter software portfolio from Siemens PLM Software provides you with all the necessary engineering tools to
More informationFRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU SIMULATION IN FORMING TECHNOLOGY
FRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU SIMULATION IN FORMING TECHNOLOGY 1 SIMULATION IN SHEET METAL FORMING Simulation is an essential part of the development chain, especially
More informationHeat Transfer in Polymers
Heat Transfer in Polymers Martin Rides, Crispin Allen, Angela Dawson and Simon Roberts 19 October 2005 Heat Transfer in Polymers - Summary Introduction Thermal Conductivity Heat Transfer Coefficient Industrial
More informationThe. universal 3D Inspection reference. advanced 3D measurement software & solutions
The universal 3D Inspection reference www.metrologicgroup.com advanced 3D measurement software & solutions About the company Optimize your quality processes, measure more efficiently, maximize your investments
More information