Anderson Greenwood Series F29/F33K primary isolation valves
|
|
|
- Nelson Cain
- 6 years ago
- Views:
Transcription
1 7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted directly to the vessel or process pipe F29 Features F33K One-piece forged body combines a compact design with strength and reduced potential leak paths compared to conventional designs. Flanged inlet connections available in a choice of sizes and ratings to suit each application. Heavy duty needle type globe valve ensures bubble-tight shut-off on venting or isolation service. Outside screw and yoke (O&Y) needle type globe valve with investment cast yoke and bolted bonnet provides high mechanical strength and reliability on primary isolation service. Bolt-on outlet option allows choice of connections for dual instrument mounting, welded connections and chemical injection. Firesafe design to meet API 607, B6755 Part 2 (optional). General application uitable for double block and bleed applications including pressure, level and flow measurement, sampling and chemical injection service. Instruments may be mounted directly to the valve outlet or remotely with gauge lines/impulse pipe work. Technical data Materials: C,, Duplex and other exotic materials eats: Metal Connections Inlet: ani flanged ½ to 2 API flanged to 2 1 /16 Outlet: ½ NPT Pressure (max.): psig (690 barg) Temperature (max.): 1000 F (538 C) Emerson. All rights reserved. VCTD EN 16/02
2 Anderson Greenwood eries F29/F33K primary isolation valves Product overview Outlet Keyblok F29 The F29 features two independently operable 0.2 inch (5 mm) HD globe style needle valves for isolation service, with an intermediate HD globe style needle valve for venting service. Metal seating is standard on valves. Vent Keyblok F33K The F33K features two independently operable 0.2 inch (5 mm) bore outside screw and yoke bolted bonnet (O&Y) valves for isolation service, with an O&Y valve for venting service. Metal seating is standard on valves. General notes tandard pressure testing to B EN tandard material traceability to EN (body only). Material thickness to ANI B Process Valve body - material codes Description C L D Valve body A105N A350 LF2 A182 F316 A182 F51 Note: carbon steel valve bodies are zinc plated and passivated as standard. F29 and F33K eries Flanged x Threaded Dimensions, inches [mm] Weight ize in Rating lb A - RF A - RTJ B lb [kg] ½ (161) (89) 7.9 (3.6) ½ (161) 6.4 (163) 3.8 (96) 8.6 (3.9) ½ (166) 6.5 (165) 3.8 (96) 8.8 (4.0) ½ 900/ (184) 7.2 (184) 4.8 (121) 11.9 (5.4) ½ (184) 7.2 (184) 5.3 (134) 15.2 (6.9) ¾ (161) (99) 8.6 (3.9) ¾ (161) 6.5 (165) 4.6 (118) 10.1 (4.6) ¾ (166) 6.5 (165) 4.6 (118) 10.4 (4.7) ¾ 900/ (184) 7.2 (184) 5.1 (130) 13.9 (6.3) ¾ (184) 7.2 (184) 5.5 (140) 16.5 (7.5) (156) 6.3 (161) 4.3 (108) 8.8 (4.0) (159) 6.5 (164) 4.9 (124) 10.1 (4.6) (159) 6.5 (166) 4.9 (124) 10.4 (4.7) 1 900/ (169) 7.0 (177) 5.9 (150) 15.4 (7.0) (183) 7.2 (183) 6.3 (159) 19.0 (8.6) 1½ (159) 6.5 (164) 5.0 (127) 10.1 (4.6) 1½ (162) 6.6 (167) 6.1 (156) 13.2 (6.0) 1½ (170) 6.7 (170) 6.1 (156) 14.3 (6.5) 1½ 900/ (180) 7.1 (180) 7.0 (178) 20.7 (9.4) 1½ (193) 7.6 (194) 8.0 (203) 35.1 (15.9) (161) 6.5 (166) 6.0 (153) 14.6 (6.6) (164) 6.7 (170) 6.5 (165) 17.6 (8.0) (173) 6.9 (175) 6.5 (165) 18.3 (8.3) 2 900/ (186) 7.4 (188) 8.5 (216) 32.8 (15.0) (199) 7.9 (201) 9.3 (235) 48.5 (22.0) øb A 2
3 Anderson Greenwood eries F29/F33K primary isolation valves 'HD' needle-type globe valve Adjustable gland follower Rolled stem threads tem packing O-ring weather seal Free swivel ball end stem Handle assembly Back seat design Body-to-bonnet metal pressure seal The HD needle-type globe valve has a rotating stem with a free-swivel ball-end seat for repetitive bubble-tight shut-off and rolled threads for low operating torque, located above the spindle packing and isolated from the process. The stem seal is with either graphite or PTFE rings and a backseat design provides secondary stem sealing and prevents stem blowout. A body-to-bonnet metal pressure seal below the threads prevents corrosion and ensures the bonnet threads are in loaded compression for additional strength and an O-ring weather seal protects bonnet retention threads from harsh environments. An adjustable gland follower allows easy access to adjust the packing gland and the valve features a T-bar handle with locking bolt to secure it firmly on the stem. Pressure rating: up to psig (680 barg). Temperature rating: -71 F to 1000 F (-57 C to +538 C). Pressure and temperature ratings HD Needle type globe valve barg PTFE tandard PTFE High Pressure Graphite psig Temperature, F ( C) HD needle type globe valve components - trim codes Item Description D 1 Gland follower Austenitic A tem A A Locknut Austenitic Austenitic 4 tem packing PTFE or graphite PTFE or graphite 5 O-ring weather seal B una-n Nitrile B una-n Nitrile 6 Ball (stem tip) 316 Ceramic 7 Bonnet locking pin Austenitic Austenitic 8 Handle assembly Austenitic Austenitic tandard trim combinations Body Trim C L D D 3
4 Anderson Greenwood eries F29/F33K primary isolation valves O&Y needle-type globe valve Weather resistant plastic cap Rolled stem threads Protective bellows Investment cast yoke Gland follower tem packing Bolted bonnet Flange gasket Handle assembly Adjustable gland flange Back seat design Free swivel ball end stem The O&Y needle-type globe valve has a bolted bonnet for strength and reliability and a precision cast yoke which assures perfect stem alignment. The rotating stem has a free-swivel ball-end for repetitive bubbletight shut-off and rolled threads to prevent galling that are completely isolated from the process with protective bellows that protect against atmospheric contamination. The stem seal is either graphite or PTFE rings and a backseat design provides secondary sealing and prevents blowout. A flange gasket ring ensures a bubble-tight body-to bonnet seal and an adjustable gland flange/follower allows easy access to the packing gland. A weatherresistant plastic bonnet cap prevents stem lubricant contamination and the valve features a T-bar handle. Pressure rating: up to 6000 psig (414 barg). Temperature rating: -71 F to 1000 F (-57 C to +538 C). Pressure and Temperature Ratings O&Y Needle Type Globe Valve barg PTFE Graphite psig Temperature, F ( C) O&Y Needle type globe valve components - trim codes Item Description D 1 Cap Plastic Plastic 2 tem A A Protective bellows Polyurethane Polyurethane 4 Yoke A351-CF8M A890-4A 5 Gland follower B N2-33 A tem packing PTFE or Graphite PTFE or Graphite 7 Body/bonnet - bolts ATM A453 ATM A453 8 Flange gasket Graphite Graphite 9 Ball (stem tip) 316 Ceramic 10 Gland flange - bolts Austenetic Austenetic 11 Handle assembly Austenetic Austenetic 12 Gland flange A351 CF8M A351 CF8M 4
5 Anderson Greenwood eries F29/F33K primary isolation valves Ordering information election guide Example: F29 V 061L 047B QV Globe needle valve type F29 Flanged x threaded double block and bleed F291 Flanged x threaded double block and bleed psi (PTFE packed) F33K Flanged x threaded double block and bleed Needle valve packing V PTFE H Graphite Body material C A105N A182 F316 L A350 LF2 D A182 F51 Trim material 316 tandard trim combinations D Duplex UN C, L and Body = Trim, D Body = D Trim Inlet connection 04 ½ 1 RF A 150 lb (ANI B16.5) 06 ¾ 3 RTJ J 300 lb (ANI B16.5) BX K 600 lb (ANI B16.5) 12 1½ 5 RX T 900 lb (ANI B16.5) R L 1500 lb (ANI B16.5) /16 8 Hub M 2500 lb (ANI B16.5) /16 N 5000 lb (API 6A) 24 3 P lb (API 6A) V 3000 lb (API 6A) Outlet connection 04 ½ 2 Male B NPT 06 ¾ 7 Female C Butt Weld (XX) 08 1 D ocket Weld (XX) E G ½ Options MPO4 Multiport outlet ½ NPT LAT Lockable tamper-proof bonnet (HD type). ICV Integral check valve (injection) PD Padlock for - LAT KFGTX Kidney flange adaptor QV ¼ NPT (f) Vent IQ(- - -) Integral quill (required length) PO Plugged outlet PV Plugged vent Full 316 trim LH Lockable ball valve handles (specify number required) VO Vent option (please specify compression fittings, if required) AT Anti-tamper (HD type only) CB Ceramic ball tip G NACE MR0175 latest revision T tellite ball tip 5
6 2017 Emerson. All rights reserved. 6
ANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH With over 40 years of experience with trunnionmounted ball valves, Metso has designed this ball valve to mount on two large, low-friction trunnion
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
Section 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
Solution Partner. Leak - Proof Flow & Control. Needle Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak Proof low & Control The Best Partner for Value Creation olution Partner Index Needle Valves NV ERIE NV50 eries 4~7 BNV60 eries
Master Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
Bolted Two Piece Carbon Steel and Stainless Steel FLOATING BALL VALVE
Bolted Two Piece Carbon Steel and Stainless Steel FOATING BA VAVE Floating Valve Features: Bolted -Piece Construction Cast Steel 50 & 00 Forged Steel 00 to 500 Fire safe SS trim/cs ENP All valves NACE
Fisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
International Standard Valve, Inc.
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are their special options is a registered trademark of International Standard Valve, Inc. www.isvalve.com
Table of Contents Model Numbering System Ratings/Connections General Data
Specification Data CH3000 5/97 Control Valves A Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with VRT Anti-Cavitation and Noise Control Lo-dB Trim Table of Contents Model Numbering
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
OpTB TM Trunnion Ball Valve
INTRODUCTION The Optimux OpTB brings the legendary and well proven robustness and dependability of the trunnion ball design to process control applications, no longer limited to a full port option, but
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
Section 11. API 7500lb Mud Gate Valves
Section 11. API 7500lb Mud Gate Valves Section 11a API 7500lb Rubber Seated Mud Gate Valves Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A ANSI B31.3
Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
CROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
Bolted Three Piece Forged Steel TRUNNION BALL VALVE
Bolted Three Piece Forged Steel TRUNNION BA VAV Trunnion Valve Features: Forged -piece construction Fire safe design ouble block and bleed design C.S. trim with mil NC ISO mounting pads Sealant injection
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
CONA -Universal ANSI / CONA -Connector ANSI
CONA -Universal ANSI for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal ANSI / CONA -Connector ANSI CONA B-Universal ANSI Bimetallic steam trap ANSI CONA M-Universal
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
5000 SERIES SHORT PATTERN BALL VALVE
5000 SERIES SHORT PATTERN BALL VALVE Short Pattern Valve for industrial and process applications. Design Pressure Rating 150# Through 2500# Valve Size 1/2 to 12 150# to 300# 1/2 to 10 600# 1/2 to 8 900#
Experience since Bellows Sealed Globe Valve Model protected bellows design
Bellows Sealed Globe Valve Model 350 - protected bellows design Successful Concept The industrial success of PHOENIX bellows sealed globe valves in critical service applications is based on: Over 40 years
M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High
JAG flocomponents n.a. JAG floater features: ...there is always a better way.
JAG flocomponents n.a....there is always a better way. T CANG: The JAG partnership is underpinned by nearly 75 years of flow control experience in the Western Canada basin. The shared vision that lead
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
Fisher NotchFlo DST Control Valve
NotchFlo DST Valve Product Bulletin Fisher NotchFlo DST Control Valve Fisher NotchFlo DST control valves offer excellent control of liquid services with high pressure drops and entrained particulate. The
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
Ball ValVes - Floating & trunnion MounteD
Ball ValVes - Floating & trunnion MounteD www.australianpipelinevalve.com.au QUALITY VALVE MANUFACTURER AUSTRALIAN PIPELINE VALVE Ball Valves Cast & Forged Floating & Trunnion FIRESAFE CERTIFIED API607
PN 40 DN 25-40, PN 25 DN 50-80, PN 16 DN Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 5208, EN RATE D RATE A
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel 5, 501 series C ont R o L Description Edition Högfors ball sector valve series 5 is specially designed for control applications of various media
Cast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
MODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
PBV Ball Valves. Severe Service Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
PBV Ball Valves Severe Service Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 56-59-400 WWW.DKAMANS.COM Manufacturer of Quality Valve Products Around the Globe At Forum Energy Technologies
Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry
Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES
8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84
L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves
DISTRIBUTED VALVES. DEMCO Gate Valves DEMCO
Gate Valves 2 TABLE OF CONTENTS Gate Valves Introduction... 4 Series DM Gate Valves... 5 Series DM 7500 Gate Valves... 7 Series DT/DB Gate Valves... 9 PRODUCT SPECIFICATIONS General Technical Information...
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
Regulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
diaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
Penberthy models RH and TH direct reading liquid level gages
High pressure flat glass gages in reflex and transparent styles Features General application RH High pressure gages are designed to be used in direct reading liquid level measurement for high pressure
We Offer Both Cast Ball Valves & Forged Ball Valves.
11 GENEL SCREWED END BALL VALVES / FORGED BALL VALVES V-155 THREE PIECES BALL VALVES V-255 Full port : 1/4 2-1/2 (DN8-DN65) : 3/8 2-1/2 (DN10-DN65), Anti-static design ASTM A351 Gr.CF8M (1.4408) Full port
Ball Float Steam Trap UNA 38, PN 100/CL 600, DN UNA 39, PN 160/CL 900/CL 1500, DN 15-50
Data Sheet 88620-0 Issue Date: 0/7 Ball Float Steam Trap, PN 00/CL 600, DN 5-50, PN 60/CL 900/CL 500, DN 5-50 h Rear view Description UNA 3.. are steam traps with ball float and needle valve for high-pressure
ball valves Ultramite 70 Series Fixed End 2- and 3-way Ball Valves
Fixed End 2- and 3-way Ball Valves Ultramite 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065
Masoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
Meter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
HIGH SEAL ULF Live Loaded Packing System
Instruction Manual HIGH-SEAL Live-Loaded Packing HIGH SEAL ULF Live Loaded Packing System Contents Introduction... 1 Scope of Manual... 1 Description... 2 Spring Selection... 3 Installation... 3 Parts
BULLETIN B NOVEMBER DeZURIK KSV SEVERE SERVICE KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 51.00-1B NOVEMBER 2016 DeZURIK KSV SEVERE SERVICE KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Class 150/300 Bonnetless Item Description Material A1 Body Carbon Steel,
Smart Solutions. Powerful Products. PBV. Cast Oilpatch Floating Ball Valves
Smart Solutions. Powerful Products. PBV Cast Oilpatch Floating Ball Valves Contents PBV Cast Oilpatch Floating Ball Valves Series PA / PAH Standard Features & Dimensional Data... 2 Parts, Materials & Engineering
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
TDC46M Carbon Steel Thermodynamic Steam Trap with Maintainable Seat
2 3 4 7 6 5 8 9 1 Optional extra V1 integral blowdown valve See spare parts for details on how to order; Alternatively please specify at the time of order placement. escription The TC46M is a carbon steel,
Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications.
Section 16 Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications. Contents F22 General Purpose Stainless Steel Filter 1/2" Port Size....................................LE-16-2
3-piece reduced bore ball valves
Worcester Controls 3-piece reduced bore ball valves Designed for a wide range of general services BS EN ISO 91 as FM 77 Almost years ago, Worcester Controls original 3-piece valve was responsible for the
Meter, PD Series, H8-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, H8-S1, S3, S5, S6 and S7 Bulletin PO01010 Issue/Rev. 0.2 (1/18) 2 Bulletin PO01010 Issue/Rev. 0.2 (1/18) Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 1 Adapter
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Corporation 3245 S. Hattie Oklahoma City, Oklahoma 73129 Telephone: (405) 677-3321 Fax: (405) 677-3917 Email:Balon@balon.com
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
MECESA IS A DESIGNER AND MANUFACTURER COMPANY FROM BARCELONA SPECIALIZED IN FITTINGS AND COMPONENTS FOR INDUSTRIAL INSTRUMENTATION LINES BORN IN 1952.
IS A DESIGNER AND MANUFACTURER COMPANY FROM BARCELONA SPECIALIZED IN FITTINGS AND COMPONENTS FOR INDUSTRIAL INSTRUMENTATION LINES BORN IN 1952. DESIGNS AND MANUFACTURES FOR A WIDE VARIETY OF INDUSTRIAL
Worcester Controls 44/ Piece Reduced Ball Valves
Worcester Controls 44/459 3 -Piece Reduced Ball Valves Almost 40 years ago, Flowserve Worcester Controls original 3-piece valve was responsible for the development of the UK ball valve market. The Series
ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves
7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.
CONTROL VALVE SOURCEBOOK PULP & PAPER
CONTROL VALVE SOURCEBOOK PULP & PAPER Copyright 2011 Fisher Controls International LLC All Rights Reserved. Fisher, ENVIRO-SEAL, Whisper Trim, Cavitrol, WhisperFlo, Vee Ball, Control Disk, NotchFlo, easy
American Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as
Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer
valves and actuators side entry ball valves
and actuators side entry ball valves 100 C 55 M 20 Y 0 K 0 C 0 M 0 Y 80 K ball introduction PetrolValves is a leading manufacturer of for the oil and gas industry. Formed in 1956, PetrolValves has grown
Product Range. Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size. Gate Valve Globe Valve Check Valve. API 600 & B16.34 Bolted Bonnet Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 API 600 & B16.34 Bolted
G-FIRE GROOVED COUPLINGS
G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO
289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
Richter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
Severe-Service Union-Bonnet Needle Valves Special Alloy Materials
www.swagelok.com Severe-Service Union-Bonnet Needle Valves Special Alloy Materials N Series and HN Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with
packless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE PO Box
Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Product Bulletin 59.1:061 D101633X012 Sliding-Stem Live-Loaded Packing Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher patented ENVIRO-SEAL and HIGH-SEAL live-loaded
Fisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
SWI BALL VALVES. High Integrity Top Entry Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
SWI BALL VALVES Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM We Manufacture Critical S ervice Valves For The Worlds Industries 1 2 TOP ENTRY TRUNNION MOUNTED
Consolidated* Electromatic* Ball Valves
GE Oil & Gas Technical Specifications 05/2012 3500 Series Consolidated* Electromatic* Ball Valves Provides automatic or manual overpressure startup for steam boiler systems and assists startup and shutdown
CATALOG C-FPV-0509 AHEAD OF THE FLOW. Fire Protection Valves
CATALOG C-FPV-0509 AHEAD OF THE FLOW Fire Protection Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
Series Sump and Sewage Systems
Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column
Packing for Sliding-Stem Valves
August 1999 Bulletin 59.1:060 Packing for Sliding-Stem Valves This bulletin will guide you in selecting standard Fisher Controls valve stem packing materials and packing box arrangements. Packing materials
INDEX: SEVERE SERVICE DATA TABLES
INDEX: SEVERE SERVICE DATA TABLES TABLE TITLE TABLE NUMBER Insulation Factors 15-01 Cavitation Regimes 15-02 Acoustic power Ratio, r w 15-03 Noise Attenuation vs. P1/P2 ratio for MegaStream trim 15-04
289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The