Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex the Accreditation Certificate D-K according DIN EN ISO/IEC 17025:2005 Period of validity: Date of issue: Holder of certificate: Zwick GmbH & Co. KG August-Nagel-Straße 11, Ulm with the further locations: Parc Empresarial Trade Center, Avda Corts Catalanes 5-7 planta 2a Local 1, E Santa Cugat del Valles (Barcelona), Spain 18 Boon Lay Way, #06-105/106, TradeHub 21, Singapore Corso Perrone 39 h rosso, I Genova, Italy Head: Deputy: Dipl.-Ing. (FH) Thomas Gaube Oliver Glökler Dipl.-Ing. Stephan Baumann Accredited since: Calibrations in the fields: Mechanical quantities: - Material testing machines (MTM) Mechanical work (MTM) - Hardness (MTM) a) on site calibration Abbreviations used: see last page The calibration laborary is permitted, without being required inform and obtain prior approval from DAkkS, use calibration standards or equivalent calibration procedures listed here with different issue dates. The calibration laborary maintains a current list of all calibration standards / equivalent calibration procedures within the flexible scope of accreditation. This document is a translation. The definitive version is the original German annex the accreditation certificate. Page 1 of 7

2 August-Nagel-Straße 11, D Ulm, Germany 1 N 600 kn DIN EN ISO : :1999 / 200 N 3000 kn 200 N 5000 kn 0.02 N 200 N 0.10 % Known masses / 0 mm 12 mm 0.1 mm 100 mm (MT 12) (MT 120 Rotary Calibration of the optical indentation measuring devices of Hardness Testers 0 mm 6 mm Object micrometer in incident light Calibration of the depth measuring device of Hardness Testers 0 mm 0.8 mm Calibration of Pendulum Period of validity: Translation Date of issue: Page 2 of 7

3 Hardness (MTM) Calibration of Hardness Testers according Brinell-, Vickers-, Knoop-, and Rockwell test procedure 100 HB 30 HV 550 HB 950 HV HV5 HV100) HV 0.01 HV3) 100 HK 950 HK HK 0.01 HK 2) 2 % HB The values indicated for the measurement uncertainty are valid for the indirect 1 % HV, but not < 1,5 UCRM 2 % HV, 2 % HK, 20 HRA 65 HRA 1.0 HRA verification with hardness comparison plates. uncertainty of the individual parameters of the direct verification is indicated separately. UCRM = calibration uncertainty of the hardness comparison plate 66 HRA 88 HRA 0.5 HRA 20 HRB 55 HRB 1.5 HRB 56 HRB 100 HRB 1.0 HRB 20 HRC 55 HRC 1.0 HRC 56 HRC 70 HRC 0.5 HRC 40 HRD 69 HRD 1.5 HRD 70 HRD 77 HRD 1.0 HRD 60 HRF 100 HRF 1.0 HRF 20 HRN 60 HRN 1.0 HRN 61 HRN 91 HRN 0.5 HRN 12 HRT 93 HRT 2.0 HRT Period of validity: Translation Date of issue: Page 3 of 7

4 Parc Empresarial Trade Center,Avda Corts Catalanes 5-7 planta 2 a Local 1, E Santa Cugat del Valles (Barcelona), Spain 1 N 600 kn DIN EN ISO : :1999 / 200 N 3000 kn 200 N 5000 kn 0.02 N 200 N 0.10 % Known masses / 0 mm 12 mm 0.1 mm 100 mm (MT 12) (MT 120 Rotary Calibration of the optical indentation measuring devices of Hardness Testers 0 mm 6 mm Object micrometer in incident light Calibration of the depth measuring device of Hardness Testers 0 mm 0.8 mm Calibration of Pendulum Period of validity: Translation Date of issue: Page 4 of 7

5 Hardness (MTM) Calibration of Hardness Testers according Brinell-, Vickers-, Knoop-, and Rockwell test procedure 100 HB 30 HV 550 HB 950 HV HV5 HV100) HV 0.01 HV3) 100 HK 950 HK HK 0.01 HK 2) 2 % HB The values indicated for the measurement uncertainty are valid for the indirect 1 % HV, but not < 1,5 UCRM 2 % HV, 2 % HK, 20 HRA 65 HRA 1.0 HRA verification with hardness comparison plates. uncertainty of the individual parameters of the direct verification is indicated separately. UCRM = calibration uncertainty of the hardness comparison plate 66 HRA 88 HRA 0.5 HRA 20 HRB 55 HRB 1.5 HRB 56 HRB 100 HRB 1.0 HRB 20 HRC 55 HRC 1.0 HRC 56 HRC 70 HRC 0.5 HRC 40 HRD 69 HRD 1.5 HRD 70 HRD 77 HRD 1.0 HRD 60 HRF 100 HRF 1.0 HRF 20 HRN 60 HRN 1.0 HRN 61 HRN 91 HRN 0.5 HRN 12 HRT 93 HRT 2.0 HRT Period of validity: Translation Date of issue: Page 5 of 7

6 18 Boon Lay Way, #06-105/106, TradeHub 21, Singapore N 600 kn DIN EN ISO : :1999 / 200 N 3000 kn 200 N 5000 kn 0.02 N 200 N 0.10 % Known masses / 0 mm 12 mm 0.1 mm 100 mm (MT 12) (MT 120 Rotary Calibration of Pendulum Period of validity: Translation Date of issue: Page 6 of 7

7 Corso Perrone 39 h rosso, I Genova, Italien 1 N 600 kn DIN EN ISO : :1999 / 200 N 3000 kn 200 N 5000 kn 0.02 N 200 N 0.10 % Known masses / 0 mm 12 mm 0.1 mm 100 mm (MT 12) (MT 120 Rotary Calibrationion of Pendulum Abbreviations used: ASTM DIN EN ISO ASTM American Standard for Testing and Materials Deutsches Institut für Normung e.v. (German Institut for Standardization) European Standard International Organisation for Standardization Period of validity: Translation Date of issue: Page 7 of 7