Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Date of issue: Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, Essen Certification of products, processes and services in the area: Type and project certification of onshore and offshore wind and their components, condition monitoring systems and small and micro wind Abbreviations used: see last page Without previous information and agreement of the DAkkS- the certification body is allowed to use within the accreditation fields marked with different revisions of the herewith specified Certification Program / Requirements Document. The certification body has at its disposal an updated list of all documents in the accreditation field. 1. Type and project certification of onshore and offshore wind and their components P20-VA-02, Rev P20-001, Rev P20-VA-004, Rev Certification of wind TÜV NORD Standard for the certification of wind Project certification (here: wind ) This document is a translation. The definitive version is the original German annex to the accreditation certificate Seite 1 von 6

2 IEC ed IEC WT with supplement & 2012 Danish Klima-, Energi- og Bygningministeriet C-WET 2003 DIBt German Federal Maritime and Hydrographic Agency (BSH) Wind - Part 22: Conformity testing and certification of wind IEC-system for the conformity testing and certification of wind (Standard withdrawn) Richtlinie für die Zertifizierung von Windenergieanlagen Guideline for the Certification of Wind Turbines Richtlinie für die Zertifizierung von Windenergieanlagen Guideline for the Certification of Wind Turbines Richtlinie für die Zertifizierung von Windenergieanlagen Guideline for the Certification of Offshore Wind Turbines Bekendtgørelse number 73, Bekendtgørelse om teknisk certificeringsordning for vindmøller. Instruction for the certification program for the design, manufacture, maintenance, service and installation of wind (Executive Order on a Technical Certification Scheme for Wind Turbines) Preliminary type certification program 2000 (TAPS-2000, amended 2003) German Institute for Structural Engineering (DIBt): Guideline for Wind Turbine Standard: Constructional realization of offshore wind, BSH 7005, including amendments Above-mentioned certification programs in conjunction with: IEC Ed. 2.0 IEC Ed 3.0 Wind Turbine Generator Systems - Part 1: Safety Requirements Wind Turbines- Part 1: Safety Requirements -Translation- Page 2 of 5

3 IEC am Ed. 3 IEC IEC IEC Ed. 3 IEC UL DNVGL-ST Amendment 1 - Wind - Part 1: Design requirements Wind Turbine Generator Systems - Part 3: Design Requirements for Offshore Wind Turbines Windturbinen - Teil 4: Auslegungsanforderungen für Getriebe für Windturbinen Wind - Part 4: Design requirements for wind turbine gearboxes Wind Turbine Generator Systems - Part 23: Full-scale structural testing of rotor blades Wind Turbine Generator Systems - Part 24: Lightning Protection Wind permitting entry of personnel Rotor blades for wind 2010 DNVGL-ST DNVGL-ST OS-J102: Design and manufacture of wind turbine blades, offshore and onshore wind Control and protection systems for wind Design of electrical installations for wind DNVGL-ST Support structures for wind 2013 OS-J101: Design of Offshore Wind Turbine Structures (Entwicklung von Offshore - Windenergieanlagen) 2009 OS-J201: Offshore substations for wind farms German Federal Maritime and Hydrographic Agency (BSH) Standard - Baugrunderkundung für Offshore- Windenergieparks, BSH Translation- Page 3 of 5

4 DIBt DIN EN DIN EN Correction GL Technical Note 067 Ed Deutsches Institut für Bautechnik (DIBt): Muster-Liste der Technischen Baubestimmungen Wind - Protective measures - Requirements for design, operation and maintenance Wind - Protective measures - Requirements for design, operation and maintenance Certification of Wind Turbines for Extreme Temperatures (here: Cold Climate), Scope of Assessment, Revision 4 2. Condition Monitoring Systems P20-AA-13, Rev & 2013 Certification of condition monitoring Systems for wind Guideline for the certification of condition monitoring systems for wind 3. Small and micro wind P20-AA-14, Rev IEC Ed. 2.0 IEC Ed. 3.0 MCS 006, Issue Certification of Small Wind Turbines Zertifizierung kleiner Windenergieanlagen Wind Turbine Generator Systems -Part 2: Safety of Small Wind Turbines Wind Turbine Generator Systems -Part 2: Safety of Small Wind Turbines Product Certification Scheme Requirements: Micro and Small Wind Turbines, DECC (Department of Energy and Climate Change), UK 2009 (Produktzertifizierungsanforderungen: Klein- und Mikro- Windenergieanlagen, DECC, UK 2009) -Translation- Page 4 of 5

5 MCS 010, Issue MCS 011, Issue BWEA Standard AWEA Standard Product Certification Scheme Requirements: Factory Production Control Requirements, DECC UK 2008 (Produktzertifizierungsanforderungen: Anforderungen an Kontrollen von Fertigungsstätten, DECC, UK 2008) Product Certification Scheme Requirements: Acceptance Criteria for Testing Required for Product Certification, DECC UK 2008 (Produktzertifizierungsanforderungen: Annahmekriterien für zur Produktzertifizierung erforderliche Prüfungen, DECC, UK 2008) Small Wind Turbine Performance and Safety Standard (Leistung und Sicherheit kleiner Windenergieanlagen, Standard) Small Wind Turbine Performance and Safety Standard (Leistung und Sicherheit kleiner Windenergieanlagen, Standard Abbreviations used: DIN MCS DECC BWEA C-WET P20 Deutsches Institut für Normung e.v. (German Standards Institute) Microgeneration Certification Scheme Department of Energy and Climate Change British Wind Energy Association Centre for Wind-Energy Technology, India Certification procedures of the TÜV NORD CERT GmbH -Translation- Page 5 of 5