PHASE DIAGRAMS UNDERSTANDING BASICS THE. Edited. F.C. Campbell. Materials Park, Ohio The Materials Information Society.
|
|
- Cameron McKinney
- 5 years ago
- Views:
Transcription
1 PHASE DIAGRAMS UNDERSTANDING THE BASICS Edited by F.C. Campbell The Materials Information Society ASM International Materials Park, Ohio i nternational.org
2 Phase Diagrams Understanding the Basics F.C. Campbell, editor Copyright 2012 ASM International" All rights reserved Contents Preface vii CHAPTER 1 Introduction to Phase Diagrams Unary Systems 2 l.2 Binary Systems Temperature and Composition Scales Equilibrium The Phase Rule Theorem of Le Chatelier and the Clausius-Clapeyron Equation The Lever Rule Relationships between Alloy Constitution and Physical Properties Phase Diagram Resources 11 CHAPTER 2 Solid Solutions and Phase Transformations One-Component (Unary) Systems Solid Solutions Interstitial Solid Solutions Substitutional Solid Solutions Intermediate Phases Free Energy and Phase Transformations Kinetics Liquid-Solid Phase Transformations Solid-State Phase Transformations Polymorphism (Allotropy) 36
3 iv / Contents CHAPTER 3 Thermodynamics and Phase Diagrams Three Laws of Thermodynamics Gibbs Free Energy Binary Solutions Chemical Potential Regular Solutions Real Solutions 64 CHAPTER 4 Isomorphous Alloy Systems 4.1 Binary Systems Nonequilibrium Cooling CHAPTER 5 Eutectic Alloy Systems 5.1 Aluminum-Silicon Eutectic System Lead-Tin Eutectic System Eutectic Morphologies 5.4 Solidification and Scale ofeutectic Structures Competitive Growth of Dendrites and Eutectics Terminal Solid Solutions CHAPTER 6 Peritectic Alloy Systems Freezing of Peritectic Alloys Mechanisms of Peritectic Formation Peritectic Structures in Iron-Base Alloys Multicomponent Systems 131 CHAPTER 7 Monotectic 135 Alloy Systems 7.1 Solidification Structures of Monotectics 136 CHAPTER 8 Solid-State Transformations Iron-Carbon Eutectoid Reaction Peritectoid Structures 166 CHAPTER 9 Intermediate Phases Order-Disorder Transformations Spinodal Transformation Structures 181
4 Contents / v CHAPTER 10 Ternary Phase Diagrams Space Model of Ternary Systems I9l 10.2 The Gibbs Triangle Tie Lines Ternary Isomorphous Systems Ternary Three-Phase Phase Diagrams Eutectic System with Three-Phase Equilibrium Peritectic System with Three-Phase Equilibrium Ternary Four-Phase Equilibrium (L -> a + p + y) Ternary Four-Phase Equilibrium (L + a > 5 + y) Ternary Four-Phase Equilibrium (L + a + fj > y) Example: The Fe-Cr-Ni System 227 CHAPTER 11 Gas-Metal Systems Free Energy-Temperature Diagrams Isothermal Stability Diagrams Limitations of Predominance Area Diagrams 237 CHAPTER 12 Phase Diagram Determination Cooling Curves Equilibrated Alloys Diffusion Couples Phase Diagram Construction Errors 257 CHAPTER 13 Computer Simulation of Phase Diagrams Thermodynamic Mqdels Computational Methods Calculation of Phase Equilibria Application of CALPHAD Calculations to Industrial Alloys Databases Industrial Applications Limitations of the CALPHAD Approach 285 CHAPTER 14 Phase Diagram Applications Industrial Applications of Phase Diagrams Limitations of Phase Diagrams 300
5 vi / Contents CHAPTER 15 Nonequilibrium Reactions Martensitic and Bainitic Structures Nonequilibrium Cooling TTT Diagrams Martensite in Steels Tempering of Martensite in Steels Nonferrous Martensite Shape Memory Alloys Bainitic Structures CHAPTER 16 Nonequilibrium Reactions Precipitation Hardening Precipitation Hardening Theory of Precipitation Hardening Precipitation Hardening of Aluminum Alloys Precipitation Hardening of Nickel-Base Superalloys 358 APPENDIX A Review of Metallic Structure 363 A.l Periodic Table 363 A.2 Bonding in Solids 365 A.3 Crystalline Structure 371 A.4 Crystalline System Calculations 377 A.5 Slip Systems 384 A.6 Crystallographic Planes and Directions 386 A.7 X-ray Diffraction for Determining Crystalline Structure A.8 Crystalline Imperfections 394 A.9 Plastic Deformation 401 A.10 Surface or Planar Defects 409 A. ll Volume Defects 425 APPENDIX B Fundamentals of Solidification 429 B. l The Liquid State 429 B.2 Solidification Interfaces 430 B.3 Solidification Structures 433. B.4 Segregation 436 B.5 Grain Refinement and Secondary Dendrite Arm Spacing 440 B.6 Porosity and Shrinkage 440 Index 447
Materials Science and Engineering: An Introduction
Materials Science and Engineering: An Introduction Callister, William D. ISBN-13: 9780470419977 Table of Contents List of Symbols. 1 Introduction. 1.1 Historical Perspective. 1.2 Materials Science and
More informationAtomic structure, arrangement, and movement Introduction to Materials Introduction Types of Materials Structure-Property-Processing Relationship
Atomic structure, arrangement, and movement to Materials Types of Materials Structure-Property-Processing Relationship Environmental Effects on Material Behavior Materials Design and Selection Atomic Structure
More informationSteels Processing, Structure, and Performance, Second Edition Copyright 2015 ASM International G. Krauss All rights reserved asminternational.
Steels Processing, Structure, and Performance, Second Edition Copyright 2015 ASM International G. Krauss All rights reserved asminternational.org Contents Preface to the Second Edition of Steels: Processing,
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -500 043 MECHANICAL ENGINEERING TUTORIAL QUESTION BANK Course Name METALLURGY AND MATERIAL SCIENCE Course Code AME005 Class III Semester
More informationThe University of Jordan School of Engineering Chemical Engineering Department
The University of Jordan School of Engineering Chemical Engineering Department 0905351 Engineering Materials Science Second Semester 2016/2017 Course Catalog 3 Credit hours.all engineering structures and
More information12/3/ :12 PM. Chapter 9. Phase Diagrams. Dr. Mohammad Abuhaiba, PE
Chapter 9 Phase Diagrams 1 2 Learning Objectives 1. Isomorphous and eutectic phase diagrams: a. label various phase regions b. Label liquidus, solidus, and solvus lines 2. Given a binary phase diagram
More informationPhase Diagrams of Pure Substances Predicts the stable phase as a function of P total and T. Example: water can exist in solid, liquid and vapor
PHASE DIAGRAMS Phase a chemically and structurally homogenous region of a material. Region of uniform physical and chemical characteristics. Phase boundaries separate two distinct phases. A single phase
More informationCopyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Phase Diagram
SE104 Structural Materials Phase Diagram Dr. Yu Qiao Department of Structural Engineering, UCSD Introduction Phase: A region in a material that differs in structure and function from other regions. Phase
More informationChapter 9 Phase Diagrams. Dr. Feras Fraige
Chapter 9 Phase Diagrams Dr. Feras Fraige Chapter Outline Definitions and basic concepts Phases and microstructure Binary isomorphous systems (complete solid solubility) Binary eutectic systems (limited
More informationSlide 1. Slide 2. Slide 3. Chapter 10: Solid Solutions and Phase Equilibrium. Learning Objectives. Introduction
Slide 1 Chapter 10: Solid Solutions and Phase Equilibrium 10-1 Slide 2 Learning Objectives 1. Phases and the phase diagram 2. Solubility and solid solutions 3. Conditions for unlimited solid solubility
More informationEquilibria in Materials
2009 fall Advanced Physical Metallurgy Phase Equilibria in Materials 09.01.2009 Eun Soo Park Office: 33-316 Telephone: 880-7221 Email: espark@snu.ac.kr Office hours: by an appointment 1 Text: A. PRINCE,
More informationIntroduction to Materials Science
EPMA Powder Metallurgy Summer School 27 June 1 July 2016 Valencia, Spain Introduction to Materials Science Prof. Alberto Molinari University of Trento, Italy Some of the figures used in this presentation
More informationPhase Diagrams. Phases
Phase Diagrams Reading: Callister Ch. 10 What is a phase? What is the equilibrium i state t when different elements are mixed? What phase diagrams tell us. How phases evolve with temperature and composition
More informationDOKUZ EYLUL UNIVERSITY FACULTY OF ENGINEERING OFFICE OF THE DEAN COURSE / MODULE / BLOCK DETAILS ACADEMIC YEAR / SEMESTER. Course Code: MME 2006
Offered by: Metalurji ve Malzeme Mühendisliği Course Title: PHASE DIAGRAMS Course Org. Title: PHASE DIAGRAMS Course Level: Lisans Course Code: MME 006 Language of Instruction: İngilizce Form Submitting/Renewal
More informationBinary Phase Diagrams - II
Binary Phase Diagrams - II Note the alternating one phase / two phase pattern at any given temperature Binary Phase Diagrams - Cu-Al Can you spot the eutectoids? The peritectic points? How many eutectic
More informationPhase Behavior. Callister P. 252 Chapter 9
Phase Behavior Callister P. 252 Chapter 9 1 Chalcolithic Era (7000 BC) (Copper Working) Bronze Age Copper and Arsenic (3000 BC) Ores from same site or Copper and Tin Alloys (2000 BC times vary around world)
More informationMaterials Engineering. Phase transformation Phase diagrams
Materials Engineering Phase transformation Phase diagrams Phase Transformation Why is it important for us? o Temperature, chemical composition and pressure can change the properties of materials o Understanding
More informationKinetics - Heat Treatment
Kinetics - Heat Treatment Nonequilibrium Cooling All of the discussion up till now has been for slow cooling Many times, this is TOO slow, and unnecessary Nonequilibrium effects Phase changes at T other
More informationIntroduction of Materials Materials Science SScience
材料科學導論 Introduction of Materials Science 許正興國立聯合大學電機工程學系 1. Introduction of Materials Science and Engineering 2. Atomic Structure and Bonding 3. Crystal Structures and Crystal Geometry 4. Solidification,
More informationModule 1. Principles of Physical Metallurgy: an introduction to the course content. Lecture 1
Module 1 Principles of Physical Metallurgy: an introduction to the course content Lecture 1 Principles of Physical Metallurgy: an introduction to the course content 1 Keywords: Cost of metals & materials,
More informationLearning Objectives. Chapter Outline. Solidification of Metals. Solidification of Metals
Learning Objectives Study the principles of solidification as they apply to pure metals. Examine the mechanisms by which solidification occurs. - Chapter Outline Importance of Solidification Nucleation
More informationChapter 11: Phase Diagrams
Chapter 11: Phase Diagrams ISSUES TO ADDRESS... When we combine two elements... what is the resulting equilibrium state? In particular, if we specify... -- the composition (e.g., wt% Cu - wt% Ni), and
More informationMaterials Science and Engineering
FOURTH E DITION Materials Science and Engineering An Introduction William D. Callister, Jr. Department of Metallurgical Engineering The University of Utah John Wiley & Sons, Inc. New York Chichester Brisbane
More informationThis content has been downloaded from IOPscience. Please scroll down to see the full text.
This content has been downloaded from IOPscience. Please scroll down to see the full text. Download details: IP Address: 148.251.232.83 This content was downloaded on 30/10/2018 at 01:15 Please note that
More informationSchematic representation of the development of microstructure. during the equilibrium solidification of a 35 wt% Ni-65 wt% Cu alloy
Schematic representation of the development of microstructure during the equilibrium solidification of a 35 wt% Ni-65 wt% Cu alloy At 1300 ºC (point a) the alloy is in the liquid condition This continues
More informationChapter 10: Phase Transformations
Chapter 10: Phase Transformations ISSUES TO ADDRESS... Transforming one phase into another takes time. Fe C FCC (Austenite) Eutectoid transformation Fe 3 C (cementite) + (ferrite) (BCC) How does the rate
More informationEffects in Ductile Iron
Summary of Element Effects in Ductile Iron Rick Gundlach Element Materials Technology Wixom Insert Company Logo Here DIS Annual Meeting, June 7, 2012 Muskegon, Michigan Types of Alloying Elements Substitutional
More informationChapter 10: Phase Transformations
Chapter 10: Phase Transformations ISSUES TO ADDRESS... Transforming one phase into another takes time. Fe (Austenite) Eutectoid transformation Fe 3 C (cementite) + C FCC (ferrite) (BCC) How does the rate
More informationThe Science and Engineering of Materials, 4 th ed Donald R. Askeland Pradeep P. Phulé. Chapter 8 Solid Solutions and Phase Equilibrium
The Science and Engineering of Materials, 4 th ed Donald R. Askeland Pradeep P. Phulé Chapter 8 Solid Solutions and Phase Equilibrium Objectives of Chapter 8 The goal of this chapter is to describe the
More informationPhase Transformations and Phase Diagrams W-151. Appendix 5A The GFE and Available Work
Phase Transformations and Phase Diagrams W-151 Appendix 5 Appendix 5A The GFE and Available Work In this appendix we show that the GFE is the energy available to do work at constant temperature, pressure,
More informationJ = D C A C B x A x B + D C A C. = x A kg /m 2
1. (a) Compare interstitial and vacancy atomic mechanisms for diffusion. (b) Cite two reasons why interstitial diffusion is normally more rapid than vacancy diffusion. (a) With vacancy diffusion, atomic
More informationPhase Transformation in Materials
2015 Fall Phase Transformation in Materials 09. 02. 2015 Eun Soo Park Office: 33-313 Telephone: 880-7221 Email: espark@snu.ac.kr Office hours: by an appointment 1 Introduction Web lecture assistance: http://etl.snu.ac.kr
More informationPhase diagrams. R.D.Makwana,IT,NU. R.D.Makwana,IT,NU
Phase diagrams Phase?? Phase is region throughout which all properties of material are essentially uniform Uniform region of a system which has uniform physical and chemical characteristics Phase diagram?
More informationES-260 Practice Final Exam Fall Name: St. No. Problems 1 to 3 were not appropriate for the current course coverage.
ES-260 Practice Final Exam Fall 2014 Name: St. No. Circle correct answers All Questions worth 4 pts each. The True and False section at the end are bonus questions worth 1 point for a correct and -1 point
More informationMaster examination. Metallic Materials
Master examination Metallic Materials 01.03.2016 Name: Matriculation number: Signature: Task Points: Points achieved: 1 13 2 4 3 3 4 6 5 6 6 3 7 4 8 9 9 6 10 9.5 11 8 12 8 13 10.5 14 4 15 6 Sum 100 Points
More informationFe-Fe 3 C phase diagram is given on the last page of the exam. Multiple choices (2.5 points each):
Materials Science and Engineering Department MSE 200, Exam #3 ID number First letter of your last name: Name: No notes, books, or information stored in calculator memories may be used. Cheating will be
More informationThe Solubility Limit
Phase Diagrams When we combine two elements... what equilibrium state do we get? In particular, if we specify... --a composition (e.g., wt%cu - wt%ni), and --a temperature (T) then... How many phases do
More informationPhase Transformations in Metals Tuesday, December 24, 2013 Dr. Mohammad Suliman Abuhaiba, PE 1
Ferrite - BCC Martensite - BCT Fe 3 C (cementite)- orthorhombic Austenite - FCC Chapter 10 Phase Transformations in Metals Tuesday, December 24, 2013 Dr. Mohammad Suliman Abuhaiba, PE 1 Why do we study
More informationChapter 9: Phase Diagrams
Chapter 9: Phase Diagrams When we combine two elements... what equilibrium state do we get? In particular, if we specify... --a composition (e.g., wt% Cu - wt% Ni), and --a temperature (T ) then... How
More informationwww-materials.eng.cam.ac.uk/typd
Part IB Paper 3: MATERIALS Examples Paper 3/1: TEACH YOURSELF PHASE DIAGRAMS This examples paper forms part of an interactive online resource Teach Yourself Phase Diagrams which is available at: www-materials.eng.cam.ac.uk/typd
More informationEach carbon atom causes a tetragonal distortion since the principal
Ferrous alloys Fig. 1: Iron-carbon equilibrium phase diagram martensite start temperature or M S. The fraction of martensite increases with the undercooling below M S. The martensite in steels is supersaturated
More informationDevelopment of Microstructure in Eutectic Alloys
CHAPTER 10 PHASE DIAGRAMS PROBLEM SOLUTIONS Development of Microstructure in Eutectic Alloys 10.16 Briefly explain why, upon solidification, an alloy of eutectic composition forms a microstructure consisting
More informationPhase Transformation in Materials
2016 Fall Phase Transformation in Materials 09. 05. 2016 Eun Soo Park Office: 33-313 Telephone: 880-7221 Email: espark@snu.ac.kr Office hours: by an appointment 1 Introduction Web lecture assistance: http://etl.snu.ac.kr
More informationCHAPTER 9 PHASE DIAGRAMS
CHAPTER 9 PHASE DIAGRAMS PROBLEM SOLUTIONS 9.14 Determine the relative amounts (in terms of mass fractions) of the phases for the alloys and temperatures given in Problem 9.8. 9.8. This problem asks that
More informationPHASE EQUILIBRIUM P + F = C + 2
PHASE EQUILIBRIUM Component: is either pure metal and/or compound of which an alloy is composed. They refer to the independent chemical species that comprise the system. Solid Solution: It consists of
More informationMaterial Science. Prof. Satish V. Kailas Associate Professor Dept. of Mechanical Engineering, Indian Institute of Science, Bangalore India
Material Science Prof. Satish V. Kailas Associate Professor Dept. of Mechanical Engineering, Indian Institute of Science, Bangalore 560012 India Chapter 6. Phase Diagrams Learning objectives: - To understand
More informationCHAPTER10. Kinetics Heat Treatment
CHAPTER10 Kinetics Heat Treatment The microstructure of a rapidly cooled eutectic soft solder ( 38 wt%pb 62 wt % Sn) consists of globules of lead-rich solid solution (dark) in a matrix of tin-rich solid
More informationMT 348 Outline No MECHANICAL PROPERTIES
MT 348 Outline No. 1 2009 MECHANICAL PROPERTIES I. Introduction A. Stresses and Strains, Normal and Shear Loading B. Elastic Behavior II. Stresses and Metal Failure A. ʺPrincipal Stressʺ Concept B. Plastic
More informationThermoCalc Application for the Assessment of Binary Alloys Non-Equilibrium Solidification
A R C H I V E S of F O U N D R Y E N G I N E E R I N G Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-331) Volume 17 Issue 1/217 163 168 3/1 ThermoCalc
More informationDepartment of Mechanical Engineering University of Saskatchewan. ME324.3 Engineering Materials. Mid-Term Examination (Closed Book)
Student #: Department of Mechanical Engineering University of Saskatchewan ME. Engineering Materials Mid-Term Examination (Closed Book) Instructor: I. Oguocha Time Allowed: h Friday, 9 October 00. Section
More informationContents. Part I Basic Thermodynamics and Kinetics of Phase Transformations 1
Contents Preface List of tables Notation page iii xiii xiv Part I Basic Thermodynamics and Kinetics of Phase Transformations 1 1 Introduction 3 1.1 What Is a Phase Transition? 3 1.2 Atoms and Materials
More informationContents. PREFACE TO THE FOURTH EDITION... xiii ACKNOWLEDGEMENTS...xv GENERAL INTRODUCTION... xvii
Contents PREFACE TO THE FOURTH EDITION... xiii ACKNOWLEDGEMENTS...xv GENERAL INTRODUCTION... xvii Part A Metals CHAPTER 1 Metals...3 1.1 Introduction... 3 1.2 Metals for a Model Steam Engine... 3 1.3 Metals
More informationPhase Equilibria, Phase Diagrams and Phase Transformations
Mats Hillert Department of Materials Science and Engineering KTH, Stockholm Phase Equilibria, Phase Diagrams and Phase Transformations Their Thermodynamic Basis CAMBRIDGE UNIVERSITY PRESS Contents Preface
More informationKINGS COLLEGE OF ENGINEERING, PUNALKULAM DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK
KINGS COLLEGE OF ENGINEERING, PUNALKULAM-613303. DEPARTMENT OF MECHANICAL ENGINEERING YEAR/SEMESTER:II / IV QUESTION BANK Subject: ME2251-Engineering Materials &Metallurgy UNIT-I PART-A 1. What is an alloy?
More information1. (a) Explain briefly bonds in solids. (b) Give the properties of covalent bonded solids or compounds? [8+8]
Code No: R05220303 Set No. 1 II B.Tech II Semester Regular Examinations, Apr/May 2008 METALLURGY AND MATERIAL SCIENCE ( Common to Mechanical Engineering, Mechatronics, Production Engineering and Automobile
More informationBinary phase diagrams
inary phase diagrams inary phase diagrams and ibbs free energy curves inary solutions with unlimited solubility Relative proportion of phases (tie lines and the lever principle) Development of microstructure
More informationSolidification: basics and beyond Equilibrium and nonequilibrium solidification
Solidification: basics and beyond Equilibrium and nonequilibrium solidification Prof. Dmitry Eskin BCAST NETCENG, 2015 1 Types of solidification reactions Equilibrium solidification 2 Gibbs phase rule
More informationTitanium and titanium alloys. Josef Stráský
Titanium and titanium alloys Josef Stráský Lecture 2: Fundamentals of Ti alloys Polymorphism Alpha phase Beta phase Pure titanium Titanium alloys alloys alloys alloys Phase transformation β α phase Hardening
More informationFundamentals of. Steel Product. Graduate Institute of Ferrous Metallurgy
Fundamentals of Steel Product Physical Metallurgy B.C. De Cooman Graduate Institute of Ferrous Metallurgy Pohang University of Science and Technology, South Korea J.G Speer Advanced Steel Products and
More informationTutorial 2 : Crystalline Solid, Solidification, Crystal Defect and Diffusion
Tutorial 1 : Introduction and Atomic Bonding 1. Explain the difference between ionic and metallic bonding between atoms in engineering materials. 2. Show that the atomic packing factor for Face Centred
More informationCHAPTER9. Phase Diagrams Equilibrium Microstructural Development
CHAPTER9 Phase Diagrams Equilibrium Microstructural Development The microstructure of a slowly cooled eutectic soft solder ( 38 wt%pb wt % Sn) consists of a lamellar structure of tin-rich solid solution
More informationIntroduction to Phase Diagrams
Phase Diagrams Understanding the Basics F.C. Campbell, editor Copyright 2012 ASM International All rights reserved www.asminternational.org Chapter 1 Introduction to Phase Diagrams In materials science,
More informationExtractive Metallurgy Course description
Extractive Metallurgy Course description Statics 3 Cr. Basic concepts, Forces, moments, and couples, Equilibrium of particles and rigid bodies, First and second moments, Structures (trusses, frames, machines),
More informationChapter 9 Heat treatment (This chapter covers selective sections in Callister Chap. 9, 10 &11)
Chapter 9 Heat treatment (This chapter covers selective sections in Callister Chap. 9, 10 &11) Study theme outcomes: After studying this chapter, students should or should be able to: - know and understand
More informationIntroduction to the phase diagram Uses and limitations of phase diagrams Classification of phase diagrams Construction of phase diagrams
Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Concept of alloying Classification of alloys Introduction to the phase diagram Uses and limitations of phase diagrams Classification of phase diagrams
More informationTwo Components System
Two Components System Three independent variables: T, P, compositions In general, constant pressure (fixed parameter). P+F=C+1 Simple Eutectic System The binary eutectic phase diagram explains the chemical
More informationCHAPTER 9: PHASE DIAGRAMS
CHAPTER 9: PHASE DIAGRAMS ISSUES TO ADDRESS... When we combine two elements... what equilibrium state do we get? In particular, if we specify... --a composition (e.g., wt%cu - wt%ni), and --a temperature
More informationHypoeutectoid Carbon Steels. Hypereutectoid Carbon Steels
Hypoeutectoid Carbon Steels Another example: Amount of carbon? 1035 Steel: white regions are proeutectoid ferrite grains By the end of this lecture you should be able to predict the amount of carbon in
More informationAlloys & Their Phase Diagrams. مرجع علمى مهندسى مواد
Alloys & Their Phase Diagrams Objectives of the class Gibbs phase rule Introduction to phase diagram Practice phase diagram Lever rule Important Observation: One question in the midterm Gibbs phase rule
More informationPhase Diagram Applications
Phase Diagrams Understanding the Basics F.C. Campbell, editor Copyright 2012 ASM International All rights reserved www.asminternational.org Chapter 14 Phase Diagram Applications Alloy phase diagrams are
More informationChapter 10. Phase Diagrams
Chapter 10 Phase Diagrams Chapter 10 Terminology and Unary System Phase Diagrams Issues to Address... When we combine two elements... what equilibrium state do we get? In particular, if we specify... --a
More informationSOLUTIONS ENGINEERING 45. UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science and Engineering
UNIVERSITY OF AIFORNIA ollege of Engineering Department of Materials Science and Engineering Professor R. Gronsky Fall Semester 20 ENGINEERING 45 Question 1 The silver-mercury system forms the basis of
More informationEngineering materials
1 Engineering materials Lecture 6 Metal and Alloys Phase Diagrams 2 Metals and alloys Some metals may have more than one crystal structure, a phenomenon known as polymorphism ( 同質異性 ), when found in elemental
More informationCu-Ag phase diagram Brazil s map
Phase Diagrams [9] Cu-Ag phase diagram Brazil s map 1> Some important definitions Component - chemically recognizable species (Fe and C in carbon steel, H2O and NaCl in salted water). A binary alloy contains
More informationBinary phase diagrams
inary phase diagrams inary phase diagrams and ibbs free energy curves inary solutions with unlimited solubility Relative proportion of phases (tie lines and the lever principle) Development of microstructure
More informationEquilibrium phase diagram of metallic alloy
Equilibrium phase diagram of metallic alloy Motivation New structure, concentration (mixing level) (at what temperature? for how long? ) Phase Diagrams - Introduction. Many materials systems can exist
More informationPhysical Ceramics. Principles for Ceramic Science and Engineering. Yet-Ming Chiang Massachusetts Institute of Technology Cambridge, Massachusetts
Physical Ceramics Principles for Ceramic Science and Engineering Yet-Ming Chiang Massachusetts Institute of Technology Cambridge, Massachusetts Dunbar P. Birnie, III University of Arizona Tucson, Arizona
More informationWhy do cocktail ice served in expensive restaurants are clear whereas the ice formed in your refrigerator is cloudy?
Phase Diagrams Why do cocktail ice served in expensive restaurants are clear whereas the ice formed in your refrigerator is cloudy? What is a solder alloy? What is the best composition for solder? How
More informationPhase Equilibria. Reading: West 7
Phase Equilibria Reading: West 7 430 PHASE DIAGRAMS Also called equilibrium or constitutional diagrams Plots of temperature vs. pressure, or T or P vs. composition, showing relative quantities of phases
More informationEngineering 45 Midterm 02
UNIVERSITY OF ALIFORNIA ollege of Engineering Department of Materials Science & Engineering Professor R. Gronsky Fall Semester, 5 Engineering 45 Midterm SOLUTIONS INSTRUTIONS LATTIE seating... Please be
More informationHeat Treating Distortion and Residual Stresses
Heat Treating Distortion and Residual Stresses Explanation of their Generation Mechanism Using Computer Simulation Kyozo Arimoto Arimotech Ltd. Table of Contents Part 1 Chapter 1 Heat treating distortion
More informationbut T m (Sn0.62Pb0.38) = 183 C, so this is a common soldering alloy.
T m (Sn) = 232 C, T m (Pb) = 327 C but T m (Sn0.62Pb0.38) = 183 C, so this is a common soldering alloy. T m (Au) = 1064 C, T m (Si) = 2550 C but T m (Au0.97Si0.03) = 363 C, so thin layer of gold is used
More informationCHAPTER 12. Phase Transformations
CHAPTER 12 Phase Transformations Introduction Basic concepts The kinetics of phase transformations Metastable versus equilibrium states Isothermal transformation diagrams Continuous cooling transformation
More informationUNIT-II PART- A Heat treatment Annealing annealing temperature Normalizing.
UNIT-II PART- A 1. What is "critical cooling rate" in hardening of steels? This critical cooling rate, when included on the continuous transformation diagram, will just miss the nose at which the pearlite
More informationOVERVIEW 1.1 INTRODUCTION CHAPTER 1
CHAPTER 1 OVERVIEW 1.1 INTRODUCTION Solidification processes are familiar to all of us, whether they concern the formation of frost on windows or ice in trays, the freezing of solders in electronic circuits,
More informationCu/Ag Eutectic System
Eutectic Systems The simplest kind of system with two solid phases is called a eutectic system. A eutectic system contains two solid phases at low temperature. These phases may have different crystal structures,
More informationMohammad Anwar Karim Id :
Department of Mechanical and Industrial Engineering ME 8109 Casting and Solidification of Materials EFFECTS OF RAPID SOLIDIFICATION ON MICROSTRUCTURE AND PROPERTIES OF AL, MG & TI ALLOYS Winter 2012 Presented
More informationthe Phase Diagrams Today s Topics
MME 291: Lecture 03 Introduction to the Phase Diagrams Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Today s Topics Concept of alloying Classification of alloys Introduction to the phase diagram
More informationCHAPTER 10 PHASE DIAGRAMS PROBLEM SOLUTIONS
CHAPTER 10 PHASE DIAGRAMS PROBLEM SOLUTIONS Solubility Limit 10.1 Consider the sugar water phase diagram of Figure 10.1. (a) How much sugar will dissolve in 1000 g of water at 80 C (176 F)? (b) If the
More informationCHAPTER 9: PHASE DIAGRAMS
CHAPTER 9: PHASE DIAGRAMS ISSUES TO ADDRESS... When we combine two elements... what equilibrium state do we get? In particular, if we specify... --a composition (e.g., wt%cu - wt%ni), and --a temperature
More informationIn their simplest form, steels are alloys of Iron (Fe) and Carbon (C). The Fe-C phase diagram is a fairly complex one, but we will only consider the
In their simplest form, steels are alloys of Iron (Fe) and Carbon (C). The Fe-C phase diagram is a fairly complex one, but we will only consider the steel part of the diagram, up to around 7% Carbon. Fe-Carbon
More informationTALAT Lecture Phase Diagrams. 14 pages, 13 Figures. Basic Level
TALAT Lecture 1203 Phase Diagrams 14 pages, 13 Figures Basic Level prepared by M H Jacobs * Interdisciplinary Research Centre in Materials The University of Birmingham, UK (Based on approach adopted by
More informationMetallic Materials-Phase Diagrams
Engineering Alloys Metals and alloys have many useful engineering properties and so have wide spread application in engineering designs. Iron and its alloys (principally steel) account for about 90 percent
More informationPhase Diagrams, Solid Solutions, Phase Strengthening, Phase Transformations
Phase Diagrams, Solid Solutions, Phase Strengthening, Phase Transformations Components and Phases Components: The elements or compounds that are mixed initially (Al and Cu). Phases: A phase is a homogenous,
More informationt # 442 SAULT COLLEGE OF APPLIED ARTS & TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: METALLURGY CODE NO. MET SEMESTER: FOUR
t # 442 SAULT COLLEGE OF APPLIED ARTS & TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: METALLURGY CODE NO. PROGRAM: MET 207-3 SEMESTER: FOUR MECHANICAL TECHNICIAN & MECHANICAL DRFTG.
More informationIntroduction to Phase Diagrams*
ASM Handbook, Volume 3, Alloy Phase Diagrams H. Okamoto, M.E. Schlesinger and E.M. Mueller, editors Copyright # 2016 ASM International W All rights reserved asminternational.org Introduction to Phase Diagrams*
More informationRecent Developments of Software and Databases
Recent Developments of Software and Databases Aachen, Sept 1-2, 2016 Introduction 2015 Introduction 1000 Introduction 64 Introduction 46 Introduction Introduction 35 Outline - What we do About the company
More informationEngineering Materials
Engineering Materials Heat Treatments of Ferrous Alloys Annealing Processes The term annealing refers to a heat treatment in which a material is exposed to an elevated temperature for an extended time
More informationModeling of Casting and Solidification Processes - MCSP 2017 Vol.14 No.5 September (b)
https://doi.org/10.1007/s41230-017-7144-5 MCSP 2017 - Modeling of Casting and Solidification Processes Vol.14 No.5 September 2017 CHINA FOUNDRY Development of thermophysical calculator for stainless steel
More informationAFFECT OF CEMENTITE PRECIPITATION ON THE EXTEND OF BAINITE REACTION IN ADI
AFFECT OF CEMENTITE PRECIPITATION ON THE EXTEND OF BAINITE REACTION IN ADI Zdzisław Ławrynowicz University of Technology and Life Sciences, Mechanical Engineering Faculty Department of Materials Science
More information