Wavelength LDH - P / D - _ / C / F / FA / TA - N - XXX - _ / B / M / L / XL. Narrow linewidth (on request) Tappered amplified

Transcription

1 LDH Series Picosecond Laser Diode Heads for PDL 800-B/-D/808/828 Wavelengths between 375 nm and 1990 nm Pulse widths as short as 40 ps (FWHM) Adjustable (average) up to 50 mw Repetition rate from single shot to 80 MHz Optional dual mode: pulsed and CW operation Collimating optics, optional fiber coupling and peltier cooling Applications Time-resolved fluorescence spectroscopy/microscopy Biochemical analytics Time-response characterization of opto-electronic devices Diffuse optical tomography Seed for fiber lasers Single photon sources Quantum optics Operation mode Housing Wavelength LDH - P / D - _ / C / F / FA / TA - N - XXX - _ / B / M / L / XL Power Laser Diode Head Pulsed mode Dual mode (pulsed and cw) Uncooled Fiber pigtailed, flat shaped Cooled Tappered amplified Fiber amplified, flat or box shaped Narrow linewidth (on request) Low High High multimode Fiber amplified, flat or box shaped C: Laser head with thermoelectric cooler, mandatory for some laser heads, optional for all other laser heads F: Laser head emits a divergent beam from FC/APC fiber output connector M: Transversal multimode structure, reduced coupling efficiency into single mode fibers The following tables list the pulse parameters and values of the available wavelengths of the LDH Series. The two adjustment levels specified here refer to the same laser head. These levels can be adjusted using the corresponding driver of the PDL Series (PDL 800-B, PDL 800-D, PDL 808 Sepia, PDL 828 Sepia II ). The low adjustment is the best choice for shortest pulses and is usually reached close to the lasing threshold. The high adjustment is used to achieve highest pulse at moderate pulse length and corresponds to the maximum intensity setting of the driver. Dual mode laser heads (LDH-D Series, pulsed and cw operation) can only be controlled by the PDL 800-D or PDL 828 Sepia II laser driver. These laser heads have a spectral width of a few nm. Special selected laser heads with narrow spectral bandwidth can also be provided.

2 Wavelengths Power adjust = low (narrow pulse) Power adjust = high (wide pulse) Wavelength Type CW Pulse**** Average Pulse Average (± 10) (LDH-) (FWHM) 40 MHz 80 MHz (FWHM) 40 MHz 80 MHz [nm] [mw] [ps] [mw] [mw] [ps] [mw] [mw] 266 (± 3) P-FA Please see separate data sheet for LDH-P-FA Series. 355 (± 3) P-FA Please see separate data sheet for LDH-P-FA Series. 375 P-C < < P-C-375B -- < < D-C < < P-C-375M -- < < D-C-375M 50 < < P-C < < D-C < < P-C < < P-C-405B -- < < D-C < < P-C-405M -- < 90** < P-C < < D-C < < P-C < < P-C-440B -- < < D-C < < P-C-440M -- < 100** < D-C-440M 200 < 100** < P-C < < P-C-450B -- < < D-C < < P-C-450M -- < < D-C-450M 200 < < P-C < < P-C-470B -- < < D-C < < P-C-470M -- < < D-C-470M 200 < < P-C < < P-C-485B -- < < D-C-485* 50 < < P-C < < P-C-500B -- < < D-C < < P-C < < P-C-510B -- < < D-C-510* 40 < < (± 3) P-FA-515L -- Please see separate data sheet for LDH-P-FA Series. 520 P-C < < D-C-520* 20 < < P-C-520M -- < < (± 3) P-FA-530B/L/ XL -- Please see separate data sheet for LDH-P-FA Series. 532 (± 3) D-TA < < D-TA-530B 20 < < (± 3) D-TA < < D-TA-560B 20 < <

3 Power adjust = low (narrow pulse) Power adjust = high (wide pulse) Wavelength Type CW Pulse**** Average Pulse Average (± 10) (LDH-) (FWHM) 40 MHz 80 MHz (FWHM) 40 MHz 80 MHz [nm] [mw] [ps] [mw] [mw] [ps] [mw] [mw] 594 (± 3) D-TA < < D-TA-595B 5 < < P < < P-C-635M -- < < D-C-635M 100 < < P-C-640B -- < < D-C < < P < < P-C < < D-C < < P < < P-C < < D-C < < P-670B -- < < P-C-670B -- < < D-C-670B 15 < < P < < P-C < < D-C < < P-C-670M*** -- < < P < < P-C < < D-C < < P < < P-C < < D-C < < P < < P-C < < D-C < < P < < P-C < < D-C < < P < < P-C < < D-C < < (± 3) P-FA-765 Please see separate data sheet for LDH-P-FA Series. 785 P < < P-C < < D-C < < P < < P-C < < D-C < < P-C-810M -- < < D-C-810M 100 < < P < < P-C < < D-C < < P-C-830M -- < < D-C-830M 100 < < P < < P-C < < D-C < <

4 Power adjust = low (narrow pulse) Power adjust = high (wide pulse) Wavelength Type CW Pulse**** Average Pulse Average (± 10) (LDH-) (FWHM) 40 MHz 80 MHz (FWHM) 40 MHz 80 MHz [nm] [mw] [ps] [mw] [mw] [ps] [mw] [mw] 850 P < < P-C < < D-C < < P < < P-C < < D-C < < on request 950 on request 965 P < < P-C < < D-C < < on request 976 P-F < < D-F < < P-F < < (± 20) P < < P-C < < D-C < < (± 3) P-FA-1060/L Please see separate data sheet for LDH-P-FA Series P-C < < D-C < < P-C < < D-C < < (± 20) P < < P-C < < D-C < < (± 3) P-FA-1530 Please see separate data sheet for LDH-P-FA Series (± 30) P < < P-C < < D-C < < (± 40) P-F < < * different coupling efficiency into optical fibers for pulsed and CW operation due to astigmatism ** shorter pulse width available on demand *** maximal repetition rate 40 MHz **** deconvoluted with instrument response function of 30 ps On request: narrow spectral bandwidth The given specification are for information only, possible changes may occur. Wavelength Power adjust = low (narrow pulse) Power adjust = high (wide pulse) Variation Type Spectral Pulse Average Pulse Average (LDH-) (FWHM) (FWHM) 40 MHz 80 MHz (FWHM) 40 MHz 80 MHz [nm] [nm] [nm] [ps] [mw] [mw] [ps] [mw] [mw] 760 ± 3 P-C-N-760 < 0.2 < < ± 3 P-C-N-780 On request 852 ± 3 P-C-N-850 < 0.3 < < ± 3 P-C-N-976 < < ± 3 P-F-N-1064 < 0.5 < < ± 3 P-C-N-1064 < 1 < <

5 Wavelength Power adjust = low (narrow pulse) Power adjust = high (wide pulse) Variation Type Spectral Pulse Average Pulse Average (LDH-) (FWHM) (FWHM) 40 MHz 80 MHz (FWHM) 40 MHz 80 MHz [nm] [nm] [nm] [ps] [mw] [mw] [ps] [mw] [mw] 1275 ± 7 P-C-N-1310 < 0.5 < < ± 7 P-C-N-1310 < 0.5 < < ± 7 P-C-N-1310 < 0.5 < < ± 7 P-C-N-1310 < 0.5 < < ± 7 P-C-N-1310 < 0.5 < < ± 3 -- < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < ± 3 P-C-N-1550 < 0.2 < < Available upon request: 760, 763, 780, 795, 937, 1083 nm (± 3 nm) INVISIBLE OR VISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM CLASS 3B LASER PRODUCT IEC / EN These tables are updated on a regular basis based on data of recently manufactured laser heads. Other specifications such as shorter pulse widths or higher s than listed might be possible depening on the performance of diodes on stock. Please contact us for more information. All measurements shown may be subject to a 10 % callibration error. Each laser head undergoes an extensive burn-in test to ensure long-term stability and is shipped with a comprehensive set of test data. This test data is kept in our database, which already holds records of more than 18 years.

6 Specifications Beam parameters Optics focus length Numerical aperture 0.55 Typical divergence with optics Polarization Polarization degree typ. > 90 % Sidemode suppression ratio (SMSR) typ. < 0.01 Cooling (optional) f = 4.5 mm (typ. for LDH-P/D-C-xxx) f = 9.0 mm (typ. for LDH-D-TA-xxx) typ. Theta ǁ 0.11 mrad, typ. Theta 0.32 mrad typ. linear, perpendicular to the fast axis* Peltier cooling stability better than 1 K for ambient temperature between 15 C and 30 C Spectral width** Wavelength < 900 nm Wavelength > 900 nm CW operation approx. 2-8 nm approx nm < 1 nm Power stability 12 hours, DT ambient < 3 K 1 % RMS, 3 % peak to peak Dimensions Cooled (ø length) Uncooled (ø length) Flat type (l w h) mm, with fiber coupling: mm mm, with fiber coupling: mm mm * a few exceptions may occur ** narrow bandwidth on request PicoQuant GmbH Phone +49-(0) Rudower Chaussee 29 (IGZ) Telefax +49-(0) Berlin info@picoquant.com Germany Web All Information given here is reliable to our best knowledge. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications and external appearances are subject to change without notice. Trademarks or corporate names are used for explanation and identification, to the owner s benefit and without intent to infringe. PicoQuant GmbH, April 2018