SNG High Performances Green Microchip Series
|
|
|
- Basil Welch
- 6 years ago
- Views:
Transcription
1 SNG High Performances Green Microchip Series Key features Repetition rate up to 70kHz Ultrashort pulses down to 500ps Multi-kW peak power Excellent beam quality, M²<1.1 Efficient, air-cooled Sealed package, extremely long life For generating high peak power green pulses of a few hundred picoseconds, microchip lasers are economical, compact, and reliable. The 532nm pulses are produced by harmonic conversion from the IR systems, the same compact sealed package being used for either wavelength. Microchips are also easy to operate and service; controllers can be used with every laser head model and swapped within minutes while conserving constant performances. The SNG series are designed for high average power, delivering multi-kw peak power at repetition rates up to 70kHz. Applications Material processing o Cost effective marking solutions o Graphitization Instrumentation o Ranging o Differential absorption LIDAR o Super-continuum generation o Distributed temperature sensing o Raman spectroscopy Biophotonics o Nanosurgery o Protein cross-linking SNG series - Page 1 of 6
2 Technical specifications: SNG-03E-100 SNG-20F-100 SNG-40F-100 New! SNG-70F- SNG-100P- 100 (6) 100 Wavelength 532nm 532nm 532nm 532nm 532nm Repetition Rate >5kHz >19kHz >35kHz >65kHz >19kHz Constant Pulse width range (FWHM) (1) <0.75ns <0.75ns <0.75ns <0.55ns <0.7ns Output power (2) >15mW >48mW >52mW >13mW >100mW Output energy >3µJ >2.5µJ >1.5µJ >0.2µJ >5µJ Peak Power >4kW >3kW >2kW >0.35kW >7kW Short term (1min) power stability (3) Long term (6 hrs) power stability (3) <±2% Beam profile Full angle divergence M² (4) Beam ellipticity (5) Polarization Package dimensions 10±2 mrad 9±2 mrad 10±2 mrad 9±2 mrad 10±2 mrad 9±2 mrad <14 mrad <14 mrad 6±1 mrad 6±1 mrad < x29x35mm 145x42x35mm 145x42x35mm 145x42x35mm 145x42x35mm Package weight 250g 300g 300g 300g 300g Options (table p3) - S S S S SNG series - Page 2 of 6
3 Notes (1) Measured with 1Ghz photodiode and 1GHz/10GS/s oscilloscope. (2) Measurement performed with an OPHIR thermal power sensor (OPHIR 3A-FS-SH) (3) For temperature variation < 3C and < 3C/hour, stability is measured with calorimeter - detector band [DC, 2Hz] (4) Mean average value M = (XY), X and Y being respectively the major and minor axis of the ellipse (5) Beam ellipticity is calculated as the ratio of the main axis far field divergence (6) Contact factory for availability SNG series - Page 3 of 6
4 Complementary information & options: Environment Parameters Operating Temperature Range Maximum Laser Head Baseplate Temperature 0-50 C <50 C Maximum Power Consumption <40W Laser Head Thermal Dissipation <15W Storage Temperature Shock of 11ms according to IEC , non operating Vibration 5Hz to 500Hz sinusoïdal according to IEC C 25g 2g Certification Laser classification according to IEC :2007 CDRH ROHs 3B Yes, if used with a -DR1 controller Yes Options Synchronization output (S) TTL compatible output signal for synchronization/monitoring Available Controller Types Model Type Input Power CDRH MLC-03A-DR1 Desktop V AC Yes MLC-03A-MR1 Module 12 V DC No MLC-03A-BR1 Board 12 V DC No SNG series - Page 4 of 6
5 CDRH Laser Head Mechanical Drawings : SNG-20F-100, SNG-40F-100, SNG-70F-100 SNG series - Page 5 of 6
6 CDRH Laser Head Mechanical Drawings : SNG-03E-100 SNG series - Page 6 of 6
>10 11 ohm-cm. ε T 11/ε0=6.7, ε T 33/ε0=8.1; Tan δ<0.001
Beta-Barium Borate Crystal BBO Beta-Barium Borate (β-bab2o4 or BBO) is one of the most excellent NLO crystals. Using a newly improved flux method, AOTK now produces highquality BBO crystal with high optical
Picosecond Transient Absorption Spectroscopy System. picotas
Picosecond Transient Absorption Spectroscopy System Can Easily Measure Short-Lived Intermediates. In most of light induced phenomena, intermediates (transient species) play important roles to determine
Fs- Using Ultrafast Lasers to Add New Functionality to Glass
An IMI Video Reproduction of Invited Lectures from the 17th University Glass Conference Fs- Using Ultrafast Lasers to Add New Functionality to Glass Denise M. Krol University of California, Davis 17th
5mm Round Standard T-1 3/4 Type Full Color Blinking LED Technical Data Sheet. Part No.: LL-F506RGBC2E-F2
5mm Round Standard T-1 3/4 Type Full Color Blinking LED Technical Data Sheet Part No.: LL-F506RGBC2E-F2 Spec No.: B508 X335 Rev No.: V.2 Date: Mar./20/2006 Page: 1 OF 9 Features: Single lamp with 3 original
DeltaPro. DeltaFlex FORENSICS PARTICLE CHARACTERIZATION ELEMENTAL ANALYSIS FLUORESCENCE GRATINGS & OEM SPECTROMETERS OPTICAL COMPONENTS RAMAN
DeltaFlex DeltaPro ELEMENTAL ANALYSIS FLUORESCENCE GRATINGS & OEM SPECTROMETERS OPTICAL COMPONENTS FORENSICS PARTICLE CHARACTERIZATION RAMAN SPECTROSCOPIC ELLIPSOMETRY SPR IMAGING Why measure fluorescence
Lasers and Laser Systems for Micro-machining
Lasers and Laser Systems for Micro-machining Martyn Knowles Oxford Lasers Ltd Unit 8, Moorbrook Park Didcot, Oxfordshire, OX11 7HP Tel: +44 (0) 1235 810088 www.oxfordlasers.com Lasers and Laser Systems
In-process Monitoring and Adaptive Control during Micro Welding with CW Fiber Laser
In-process Monitoring and Adaptive Control during Micro Welding with CW Fiber Laser Yousuke KAWAHITO*, Masaharu KAWASAKI* and Seiji KATAYAMA* * Osaka University, Joining and Welding Research Institute
Laser Produced Plasma for Production EUV Lithography
TRW / Cutting Edge Optronics Laser Produced Plasma for Production EUV Lithography EUVL Source Workshop October 29, 2001 TRW/CEO Laser-Produced Plasma (LPP) EUV Source Development and Commercialization
Laser-induced Selective Metal Plating on PP and PC/ABS Polymers Surface
Laser-induced Selective Metal Plating on PP and PC/ABS Polymers Surface K. Ratautas 1, M. Gedvilas 1, I. Stankevičienė 1, A. Jagminienė 1, E. Norkus 1, N. Li Pira 2, S. Sinopoli 3, G. Račiukaitis 1 1 Center
LITE-ON TECHNOLOGY CORPORATION.
Features * Lead (Pb) free product RoHS compliant. * High efficiency. * Low power consumption. * CMOS/MOS compatible. * TTL compatible. * Wide viewing angle. Package Dimensions Part No. Lens Source Color
Through Hole Lamp Product Data Sheet LTL307GA6DP Spec No.: DS Effective Date: 08/27/2014 LITE-ON DCC RELEASE
Product Data Sheet LTL307GA6DP Spec No.: DS20-2014-0155 Effective Date: 08/27/2014 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho,
Optical Components: Laser Crystals
Optical Components: Laser Crystals Table of Contents Crystals Introduction... 2 Nd: YVO 4... 3 Nd:YAG... 6 Nd:YLF... 7 Cr:YAG... 9 1 Crystals Introduction Sinoceramics supplies many types of crystals for
Experts in Femtosecond Laser Technology. DermaInspect. Non-invasive multiphoton tomography of human skin
Experts in Femtosecond Laser Technology DermaInspect Non-invasive multiphoton tomography of human skin In vivo optical biopsies with subcellular spatial resolution based on near infrared femtosecond laser
Through Hole Lamp Product Data Sheet LTL2P3TBK5 Spec No.: DS Effective Date: 05/11/2012 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTL2P3TBK5 Spec No.: DS20-2002-467 Effective Date: 05/11/2012 Revision: D LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
LC013B - COB(Chip on Board) LED
Rev : 001 Product Family Data Sheet LC013B - COB(Chip on Board) LED Introduction Features 13W COB LED : 17.0 x 17.0 x t 1.9 (mm) InGaN/GaN MQW LED with long-time reliability Lead (Pd) free product - RoHS
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (Environmental & Electrical Product Test Laboratory) 15 Enterprise Way Aviation Park West Bournemouth Airport Christchurch Dorset BH23 6HH
Through Hole Lamp Product Data Sheet LTL-1BEWJ Spec No.: DS Effective Date: 07/10/2012 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTL-1BEWJ Spec No.: DS-20-97-0011 Effective Date: 07/10/2012 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Features Package Dimensions ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Industry standard PLCC-4 package. High reliability LED
High Power Operation of Cryogenic Yb:YAG. K. F. Wall, B. Pati, and P. F. Moulton Photonics West 2007 San Jose, CA January 23, 2007
High Power Operation of Cryogenic Yb:YAG K. F. Wall, B. Pati, and P. F. Moulton Photonics West 2007 San Jose, CA January 23, 2007 Outline Early work on cryogenic lasers MPS laser technology Recent program
Radiation Damage of Polycrystalline CVD Diamond with Graphite Electrical Contacts
Radiation Damage of Polycrystalline CVD Diamond with Graphite Electrical Contacts E. Alemanno 1,2, M. Martino 1,2, A.P. Caricato 1,2, M. Corrado 1,2, C. Pinto 1,2, S. Spagnolo 1,2, G. Chiodini 2, R. Perrino
LITE-ON TECHNOLOGY CORPORATION
Features * High Intensity. * Popular T-1 diameter package. * Selected minimum intensities. * Wide viewing angle. * General purpose leads. * Reliable and rugged. Package Dimensions Part No. Lens Source
RED and/or IR TO-CAN Laser Diodes
Introduction Panasonic offers a series of dualwavelength and single-wavelength laser diode () realized by the proprietary MOCVD fabrication technology. The, which emits 660nm and/or 780nm laser light,
Standard fiber offering.
Standard fiber offering. Stress Corrosion Factor Strength Chart www.nufern.com C-Band Erbium Doped Fiber Single-Mode Fiber Nufern s high performance C-Band Erbium-Doped 980-HP Fibers (EDFC-980-HP and EDFC-980C-HP-80)
In-Process Monitoring and Adaptive Control in Micro Welding with a Single-Mode Fiber Laser.
Title Author(s) In-Process Monitoring and Adaptive Control in Micro Welding with a Single-Mode Fiber Laser KAWAHITO, Yousuke; KATAYAMA, Seiji Citation Transactions of JWRI. 38(2) P.5-P.11 Issue Date 2009-12
UVTOP280-FW-SMD. Description. Maximum Rating (T CASE = 25 C) Electro-Optical Characteristics (T CASE = 25 C, I F = 20 ma)
v2.0 11/2017 UVTOP280-FW-SMD Deep Ultraviolet Light Emission Source 285 nm, 2.0 mw 3535 Ceramic SMD Package Low Thermal Resistance Chemical and Biological Analysis Description UVTOP280-FW-SMD is a deep
Measurement data at orders of magnitude lower cost than other techniques BENEFITS Simple UVC source ideal for compact sensors
Optan The Optan Ball Lens, with integrated focusing optics, is the first choice for discerning professionals developing sensors and instruments in demanding measurement applications. Designed for and proven
3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP. Features. Descriptions. Package Dimensions. Part Number: APBA3010ESGC-GX
3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APBA3010ESGC-GX Features 3.0x2.0x1.0mm right angle SMD LED, 1.0mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator.
Descriptions. The Hyper Red source color devices are made with Low power consumption.
T-1 3/4 (5mm) FULL COLOR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-154A4SURKQBDZGW Features Descriptions Uniform light output. The source
Qswitched lasers are gaining more interest because of their ability for various applications in remote sensing, environmental monitoring, micro
90 Qswitched lasers are gaining more interest because of their ability for various applications in remote sensing, environmental monitoring, micro machining, nonlinear frequency generation, laserinduced
Leaders in Solid State Laser Components. Kigre Laser Glass
Kigre Laser Glass With more than 30 years of development and manufacturing experience Kigre, Inc. has earned its reputation as a recognized specialist in laser glass formulation, fabrication, and precision
Rapid Microtooling with laser based methods
Hochschule Mittweida University of Applied Sciences Rapid Microtooling with laser based methods R. Ebert, U. Löschner, A. Streek, J. Schille, T. Süß, L. Hartwig, U. Klötzer, H. Exner ISL 2008 Chemnitz
SPEC NO: DSAB0830 REV NO: V.15A DATE: MAY/05/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
2.0x1.25mm SMD CHIP LED LAMP Part Number: Super Bright Red Features 2.0mm x1.25mm SMT LED,0.75mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package : 2000pcs
Bridgelux Vesta Series Dim-To-Warm 13mm and 15mm Arrays. Product Data Sheet DS151
Bridgelux Vesta Series Dim-To-Warm 13mm and 15mm Arrays Product Data Sheet DS151 Introduction Vesta Series Vesta Series Dim-To-Warm Array products deliver adaptable light in a cost-effective, solid state
Neodymium Doped Yttrium Orthovanadate (Nd:YVO4)
Neodymium Doped Yttrium Orthovanadate (Nd:YVO4) Nd:YVO4 is the most efficient laser host crystal for diode pumping among the current commercial laser crystals, especially, for low to middle power density.
TO-2013BC-MYE. Surface Mount Device LED. Features. Dimensions MOLDING BODY(LENS) 0.40 PCB 0.40 CATHODE MARK SOLDERING TERMINAL
TO-2013BC-MYE Surface Mount Device LED Part Number Material Chip Source Color Lens Color TO-2013BC-MYE AlGaInP Yellow Water clear Features IC compatible Compatible with automatic placement equipment Compatible
Military Attenuator Module
Military Attenuator Module Actual size: 2.28 x 2.4 x 0.5in 57,9 x 61,0 x 12,7mm MI-RAM Ripple Attenuator Module Features & Benefits Reduces output PARD to 10mVp-p Full attenuation up to 20A load No adjustments
High Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 55 A Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
Greenhouse Gas Measurement Technology
Greenhouse Gas Measurement Technology Michael Corvese Thermo Fisher Scientific March 25, 2010 Agenda Introduction GHG Regulatory Current Methods Infrared Spectroscopy GC FID Emerging Methods Laser-Based
LUXEON CoB High Uniformity and High Efficiency Array
LUXEON CoB High Uniformity and High Efficiency Array Introduction Philips Lumileds high uniformity array solution is a new breakthrough in efficacy for arrays. Due to its industry leading small Light Emitting
Monitoring and Controlling the Temperature in a High power Direct Diode Laser Surface Hardening Application
Monitoring and Controlling the Temperature in a High power Direct Diode Laser Surface Hardening Application Authors: Crystal M. Cook and John M. Haake Heat treating: Proceedings of the 20 th conference:
4 Concept of Ripple Pyrometry during Flash Lamp Annealing
4 Concept of Ripple Pyrometry during Flash Lamp Annealing 4.1 Review on Temperature Measurement for Flash Lamp Annealing Several different efforts have been undertaken to measure temperature by contactless
T-1 3/4 (5mm) BI-COLOR RIGHT ANGLE LED INDICATOR. Features. Descriptions. Package Dimensions. Part Number: WP59CB/EGW. High Efficiency Red Green
T-1 3/4 (5mm) BI-COLOR RIGHT ANGLE LED INDICATOR Part Number: WP59CB/EGW Features Pre-trimmed leads for pc board mounting. 3 leads with one common lead. Black case enhances contrast ratio. Wide viewing
Laser Dicing of Silicon: Comparison of Ablation Mechanisms with a Novel Technology of Thermally Induced Stress
Dicing of Silicon: Comparison of Ablation Mechanisms with a Novel Technology of Thermally Induced Stress Oliver HAUPT, Frank SIEGEL, Aart SCHOONDERBEEK, Lars RICHTER, Rainer KLING, Andreas OSTENDORF Zentrum
Time-resolved Measurements Using the Agilent Cary Eclipse Fluorescence Spectrophotometer A Versatile Instrument for Accurate Measurements
Time-resolved Measurements Using the Agilent Cary Eclipse Fluorescence Spectrophotometer A Versatile Instrument for Accurate Measurements Technical Overview Authors Dr. Fabian Zieschang, Katherine MacNamara,
ISA-WELD // Precision resistors. BRS // Size Features
Features 2 W power rating at 2 C Constant current up to 32 A (2 mohm) copper connectors Solid metal precision resistance materials Excellent long-term stability Ideal suited for mounting on DBC / IMS substrate
In-process Monitoring and Adaptive Control for Laser Spot and Seam Welding of Pure Titanium
In-process Monitoring and Adaptive Control for Laser Spot and Seam Welding of Pure Titanium Yousuke KAWAHITO*, Masayuki KITO* and Seiji KATAYAMA* * Osaka University, Joining and Welding Research Institute
Fabrication of the Crystalline ITO Pattern by Picosecond Laser with a Diffractive Optical Element
Fabrication of the Crystalline ITO Pattern by Picosecond Laser with a Diffractive Optical Element C.W. Chien and C.W. Cheng* ITRI South Campus, Industrial Technology Research Institute, No. 8, Gongyan
SEVENTH FRAMEWORK PROGRAMME
SEVENTH FRAMEWORK PROGRAMME THEME FP7-ICT-2009-C Instrument Project no. Project acronym STREP 244068 CROSSTRAP Project title Coherently-enhanced Raman One-beam Standoff Spectroscopic TRacing of Airborne
LITE-ON TECHNOLOGY CORPORATION
Features * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * Popular T-13/4 diameter.
Confocal Microscopy of Electronic Devices. James Saczuk. Consumer Optical Electronics EE594 02/22/2000
Confocal Microscopy of Electronic Devices James Saczuk Consumer Optical Electronics EE594 02/22/2000 Introduction! Review of confocal principles! Why is CM used to examine electronics?! Several methods
Descriptions. Kingbright
T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-59GYW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life-solid state reliability. RoHS compliant. Descriptions
Through Hole Lamp Product Data Sheet LTL-307G-042A Spec No.: DS Effective Date: 10/21/2015 LITE-ON DCC RELEASE
Product Data Sheet Spec No.: DS20-2015-0110 Effective Date: 10/21/2015 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei
Laser measurement of KCl vapor in 4 MW CFB boiler during straw combustion and ferric sulfate injection
Laser measurement of KCl vapor in 4 MW CFB boiler during straw combustion and ferric sulfate injection Juha Toivonen, Tapio Sorvajärvi Department of Physics, Tampere University of Technology, P.O. Box
Low Divergence atomic beam using laser ablation of thin film
Low Divergence atomic beam using laser ablation of thin film Kamlesh Alti, Susanta Das, Bulumani Kalita, Pratima Agarwal and Alika Khare* Department of Physics Indian Institute of Technology Guwahati,
Conversion efficiency of 6.X nm Emitted from Nd:YAG and CO 2 Laser Produced Plasma
S29, Tuesday Morning Conversion efficiency of 6.X nm Emitted from Nd:YAG and CO 2 Laser Produced Plasma Shinsuke Fujioka 1 1 Institute of Laser Engineering, Osaka University!! H. Nishimura 1, M. Miyake
Optimizing the processing of sapphire with ultrashort laser pulses
Optimizing the processing of sapphire with ultrashort laser pulses Geoff Lott 1, Nicolas Falletto 1, Pierre-Jean Devilder, and Rainer Kling 3 1 Electro Scientific Industries, Eolite Systems, 3 Alphanov
Generation Response. (Supporting Information: 14 pages)
Cs 4 Mo 5 P 2 O 22 : A First Strandberg-Type POM with 1D straight chains of polymerized [Mo 5 P 2 O 23 ] 6- units and Moderate Second Harmonic Generation Response (Supporting Information: 14 pages) Ying
EUV Source Supplier Update, Gigaphoton
EUV Source Supplier Update, Gigaphoton Hakaru Mizoguchi EUV Source Workshop 6 May, 2007 Baltimore, MD, USA Acknowledgments A part of this work was performed under the management of EUVA in the NEDO's R&D
RED and IR Frame Laser Diodes
Introduction Panasonic offers a series of dualwavelength laser diode (LD) realized by the proprietary MOCVD fabrication technology. The LD, which emits 660nm and 780nm laser light, is assembled in an open-type
Modification of Glass by FS Laser for Optical/Memory Applications
Modification of Glass by FS Laser for Optical/Memory Applications Kazuyuki Hirao and Kiyotaka Miura Department of Material Chemistry Kyoto University International Workshop on Scientific Challenges of
No. STSE-CC6130A <Cat.No > SPECIFICATIONS FOR NICHIA CHIP TYPE UV LED MODEL : NCSU033A(T) NICHIA CORPORATION -0-
No. STSE-CC6130A SPECIFICATIONS FOR NICHIA CHIP TYPE UV LED MODEL : NCSU033A(T) -0- 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ts=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 700
TruMicro: Power meets precision. Machine tools / Power tools Laser technology / Electronics
TruMicro: Power meets precision. Machine tools / Power tools Laser technology / Electronics Great results on a small scale. Contents Great results on a small scale. 2 Cold material processing. 4 Our expertise
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 32.768 KHz TYPE G8 SMD CRYSTAL 0 Jun.16,2016 A APPROVED PREPARED
In-Process Monitoring and Adaptive Control during Pulsed YAG Laser Spot Welding of Aluminum Alloy Thin Sheets
JLMN-Journal of Laser Micro/Nanoengineering, Vol.1, No. 1, 2006 In-Process Monitoring and Adaptive Control during Pulsed YAG Laser Spot Welding of Aluminum Alloy Thin Sheets Yousuke KAWAHITO * and Seiji
Descriptions. Kingbright
3mm RIGHT ANGLE LED INDICATOR Part Number: L-42WUM/1GYWT Features Pre-trimmed leads for pc mounting. Black case enhances contrast ratio. Wide viewing angle. High reliability-life measured in years. Housing
NIT LIMITED NO. NC-118-PLAN-SPS PULSE PICKER FOR ULTRAFAST FIBER LASER
NIT LIMITED NO. NC-118-PLAN-SPS-14-15 PULSE PICKER FOR ULTRAFAST FIBER LASER NATIONAL INSTITUTE OF SCIENCE EDUCATION & RESEARCH INSTITUTE OF PHYSICS CAMPUS, P.O.: SAINIK SCHOOL, BHUBANESWAR-751 005 Tender
Laser Bond Inspection (LBI)
Laser Bond Inspection (LBI) A4A NDT Conference September 24, 2014 David Sokol David Lahrman LSP Technologies, Inc. Dublin, OH Presentation Outline Introduction to Laser Bond Inspection (LBI) for Adhesively
Through Hole Lamp Product Data Sheet LTL-307G Spec No.: DS Effective Date: 05/28/2008 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTL-307G Spec No.: DS-20-92-0163 Effective Date: 05/28/2008 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1
Rapid Kinetics with IR Protein folding examples
Rapid Kinetics with IR Protein folding examples Time dependent data with FTIR Stop-flow methods - msec limits so far Continuous, micro-flow methods - < 100 µsec Rapid scan FT-IR - msec Multichannel laser
16.2 Scanning Infrared Spectrometers
16.2 Scanning Infrared Spectrometers it's difficult to find materials transparent in the infrared water vapor and atmospheric CO 2 can cause problems there are three common sources high diffraction orders
4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: AA4040CGSK
4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040CGSK Green Features Single color. Suitable for all SMT assembly and solder process. Available on tape and reel. Ideal for backlighting. Package
Bridgelux Gen. 7 V6 HD LED Array. Product Data Sheet DS401
Bridgelux Gen. 7 V6 HD LED Array Product Data Sheet DS401 1 Introduction V Series HD V Series HD LED array product, an ultra-high lumen density COB product line, is designed for high intensity spotlights
Investigation of cw and ultrashort pulse laser irradiation of powder surfaces a comparative study
Investigation of cw and ultrashort pulse laser irradiation of powder surfaces a comparative study Robby Ebert, Frank Ullmann, Joerg Schille, Udo Loeschner, Horst Exner Laser Institute at the University
Rice/TCU REU on Computational Neuroscience. Fundamentals of Molecular Imaging
Rice/TCU REU on Computational Neuroscience Fundamentals of Molecular Imaging June 2, 2009 Neal Waxham 713-500-5621 m.n.waxham@uth.tmc.edu Objectives Introduction to resolution in light microscopy Brief
Improvement of Laser Fuse Processing of Fine Pitch Link Structures for Advanced Memory Designs
Improvement of Laser Fuse Processing of Fine Pitch Link Structures for Advanced Memory Designs Joohan Lee, Joseph J. Griffiths, and James Cordingley GSI Group Inc. 60 Fordham Rd. Wilmington, MA 01887 jlee@gsig.com
SPEC NO: DSAF1072 REV NO: V.7A DATE: MAR/24/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.0mmx1.5mm SMD CHIP LED LAMP Part Number: High Efficiency Red Features 3.0mmx1.5mm SMT LED, 1.4mm thickness. Low power consumption. Ideal for backlight and indicator. Package : 2000pcs / reel. Moisture
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 32.768 KHz TYPE G9 SMD CRYSTAL G93270002 0 Oct.31,2013 C
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 32.768 KHz TYPE G9 SMD CRYSTAL G93270004 0 Oct.25,2013 B
Through Hole Lamp Product Data Sheet LTL760RGBEBJP1 LITE-ON DCC RELEASE
Product Data Sheet Spec No. :DS20-2017-0055 Effective Date: 06/02/2017 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei
Thermo Scientific GENESYS 10S Bio spectrophotometer
PRODUCT SPECIFICATIONS GENESYS 10S Bio UV-Visible Spectrophotometer Thermo Scientific GENESYS 10S Bio spectrophotometer Accurate and convenient life science UV-Visible measurements Designed for performance
Laser damage threshold of AR coatings on phosphate glass
Laser damage threshold of AR coatings on phosphate glass Optical Coatings for Laser Applications Wednesday, 12 th April 2017, Buchs SG, Switzerland dirk.apitz@schott.com, SCHOTT Suisse SA, Advanced Optics,
SPEAKER SC-COBRA
SPEAKER-1115-3.5-SC-COBRA The 11x15x3.5 mm rectangular COBRA speaker is a high end miniature speaker specifically designed for portable consumer devices, such as music phones, smartphones or tablet computers
DC-DC Converters MI-J00
DC-DC Converters MI-J00 10 to 50 Watts Features & Benefits Inputs: 28V DC per MIL-STD-704D/E/F 155V DC per MIL-STD-1399A 270V DC per MIL-STD-704D/E/F Single output: 2 48V DC Up to 23W/in 3 MIL-STD-810
Optical Coatings. Photonics 4 Luxury Coatings , Genève. Dr. Andreas Bächli Head of Optical Coatings at RhySearch, Buchs (SG)
Optical Coatings Photonics 4 Luxury Coatings 21.06.2017, Genève Dr. Andreas Bächli Head of Optical Coatings at RhySearch, Buchs (SG) RhySearch The Research- and Innovation Center in the Rhine Valley RhySearch
SMD LED Product Data Sheet LTW-C235DCKF-5A Spec No.: DS Effective Date: 06/22/2010 LITE-ON DCC RELEASE
SMD LED Product Data Sheet LTW-C235DCKF-5A Spec No.: DS22-2008-0121 Effective Date: 06/22/2010 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road,
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
BBO Crystals. Features. Broad phase-matchable second-harmonic-generation (SHG) range from nm to 2500 nm
BBO Crystals Broad phase-matchable second-harmonic-generation (SHG) range from 409.6 nm to 2500 nm Wide transparency range from 189 nm to 2600 nm High damage threshold of 10 J/cm 2 for 10 ns pulse-width
Ruby Installation Manual
Ruby Installation Manual Version 02 www.servodynamics.com Introduction Table of Contents: 1 2 2.1 2.2 2.3 INTRODUCTION -------------------------------------------------------------------------------------
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
Laser-assisted microscale deformation of stainless steels and ceramics
Laser-assisted microscale deformation of stainless steels and ceramics Guofei Chen Xianfan Xu Purdue University School of Mechanical Engineering West Lafayette, Indiana 47907 E-mail: xxu@ecn.purdue.edu
SMPM Female Cabled Connectors
Product Specification 108-2326 28 APR 14 Rev B SMPM Female Cabled Connectors 1. SCOPE This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Subminiature P Miniature
Kevin Kuo EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS (LED TYPES) EXAMINED BY : FILE NO. CAS ISSUE : JUN.03,2002 APPROVED BY:
EXAMINED BY : Kevin Kuo APPROVED BY: FILE NO. CAS-10184 EMERGING DISPLAY ISSUE : JUN.03,2002 TECHNOLOGIES CORPORATION TOTAL PAGE : 7 VERSION : 3 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 20400 (LED
Description. Kingbright
2.0x1.25mm SMD CHIP LED LAMP Part Number: KP-2012CGCK Green Features 2.0mmx1.25mm SMD LED,1.1mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package : 2000pcs
SMD LED Product Data Sheet LTW-326DAKS-5A Spec No.: DS Effective Date: 12/13/2014 LITE-ON DCC RELEASE
SMD LED Product Data Sheet LTW-326DAKS-5A Spec No.: DS22-2009-0001 Effective Date: 12/13/2014 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road,
Descriptions. Kingbright
3.0x2.5mm SURFACE MOUNT LED LAMP Part Number: KPBL-3025ESGC Features Descriptions 3.0mmx2.5mm SMD LED, 1.4mm thickness. Low power consumption. Wide viewing angle. Ideal for back light and indicator. Inner
March 21, Notice Inviting Tender cum Tender Document (One Part Limited Tender) for the following items:
TATA INSTITUTE OF FUNDAMENTAL RESEARCH Autonomous Institution of the Department of Atomic Energy, Government of India HOMI BHABHA ROAD, NAVY NAGAR, COLABA, MUMBAI - 400 005. Telephone : 022-2278 2890,
Performance of the Micro Photon Devices PDM 50CT SPAD detector with PicoQuant TCSPC systems
Technical Note Performance of the Micro Photon Devices PDM 5CT SPAD detector with PicoQuant TCSPC systems Rolf Krahl, Andreas Bülter, Felix Koberling, PicoQuant GmbH These measurements were performed to
High Power Gas Discharge and Laser Produced Plasma Sources for EUV Lithography
High Power Gas Discharge and Laser Produced Plasma Sources for EUV Lithography U. Stamm, I. Ahmad, I. Balogh, H. Birner, D. Bolshukhin, J. Brudermann, S. Enke, F. Flohrer, K. Gäbel, S. Götze, G. Hergenhan,
Low Energy Consumption, High-Speed Productivity LCG 3015 AJ. Fiber Laser Cutting System
Low Energy Consumption, High-Speed Productivity LCG 3015 AJ Fiber Laser Cutting System Development Concept The LCG 3015 AJ is the latest addition to Amada's line of fiber laser cutting systems. The 2kW
Bridgelux Gen 7 V13 Array Series. Product Data Sheet DS101
Bridgelux Gen 7 V13 Array Series Product Data Sheet DS101 1 Introduction V Series The V Series LED Array products deliver high quality light in a compact and cost-effective solid-state lighting package.