INSTRUMENT CLEANING & STERILISATION FOAMING BATH FORMULATION. Surgistain. Rapid Multi-Enzyme Cleaner. Kimguard Sterile Wrap. Instrument brushes $32.

Size: px

Start display at page:

Download "INSTRUMENT CLEANING & STERILISATION FOAMING BATH FORMULATION. Surgistain. Rapid Multi-Enzyme Cleaner. Kimguard Sterile Wrap. Instrument brushes $32."

Archibald Hill
6 years ago
Views:

1Ltr Rapid Multi-Enzyme Cleaner Ÿ Proprietary combination enzyme Ÿ concentrate Ÿ Unparalleled

and Ÿ mucopolysaccharides $32.50 4+ $29.

Mild acidic solution removes rust, stains,spotting and corrosion & restores instrument's

00 Instrument brushes l Nylon bristles for effective cleaning of instrument box locks l

00 43 x 43cm Ctn/500 185201 $137.00 61 x 61cm Ctn/500 185210 $201.00 91.6 x 91.

1 1Ltr Rapid Multi-Enzyme Cleaner Ÿ Proprietary combination enzyme Ÿ concentrate Ÿ Unparalleled combination of speed Ÿ and efficacy Ÿ Fully effective against proteins, Ÿ carbohydrates, lipids and Ÿ mucopolysaccharides $ $ FOAMING BATH FORMULATION Kimguard Sterile Wrap The standard of excellence for wrapping surgical instrument packages. Kimguard sterile wrap's strong, four-layered construction is designed to deliver strength, barrier and low lint performance. Surgistain Removes rust, spots, and stains from surgical instruments. Mild acidic solution removes rust, stains,spotting and corrosion & restores instrument's original finish 4Ltr $ Instrument brushes l Nylon bristles for effective cleaning of instrument box locks l Stainless steel bristles for cleaning serrations l Autoclavable 30 x 30cm Ctn/ $ x 43cm Ctn/ $ x 61cm Ctn/ $ x 91.6cm Ctn/ $ x 121.5cm Ctn/ $ x 140cm Ctn/ $ Nylon bristles double ended Nylon bristles single end Stainless steel bristles single end Pkt/3 $21.95 Autoclave & Sterlization See Page No Gloves & Protection See Page No Instruments See Page No Phone : Fax : sales@diagmed.com.au 187

Classifications Class ISO11140-1: 2005 Definition* Practical Application Class 1: Process Indicators Class 2: indicators for use in specific tests Class 3: Single variable indicators Class 4:

2 Classifications Class ISO : 2005 Definition* Practical Application Class 1: Process Indicators Class 2: indicators for use in specific tests Class 3: Single variable indicators Class 4: Multi-variable indicators Class 5: Integrating indicators Class 6: Emulating indicators Process indicators are intended for use with individual units (e.g. packs, containers) to indicate that the unit has been directly exposed to the sterilization process and to distinguish between processed and unprocessed units. They shall be designed to react to one or more of the critical process variables Class 2 indicators are intended for use in specific test procedures as defined in relevant sterilizer/sterilization standards. A single variable indicator shall be designed to react to one of the critical variables and is intended to indicate exposure to a sterilization process at a stated value (SV) of the chosen variable. A multi-variable indicator shall be designed to react to two or more of the critical variables and is intended to indicate exposure to a sterilization process at the stated values (SVs) of the chosen variables. Integrating indicators shall be designed to react to all critical variables. The SVs are generated to be equivalent to, or exceed the performance requirements given in the ISO series for BIs. Emulating indicators are cycle verification indicators which shall be designed to react to all critical variables for specified sterilization cycles. The SVs are generated from the critical variables of the specified sterilization process Indicator tapes, indicator labels, and load cards are examples of externally visible Chemical Indicators that are Process Indicators used for exposure control. Bowie-Dick type tests are specific tests used for quipment control to evaluate the sterilizer performance. An example of a Single Variable Indicator is a temperature tube that contains a chemical pellet that melts at a specific temperature. Single variable indicators may be used for pack control monitoring but would not provide as much information as a Class 4 or Class 5 Chemical Indicator. Single Variable Indicators may also be used for exposure control monitoring. This temperature tube would be used to determine that a specific temperature was reached at a specific location in the sterilizer chamber. Multi-variable Chemical Indicators are used for pack control. These internal Chemical Indicators are usually paper strips printed with a Chemical Indicator. Integrating Indicators are the most accurate of the internal Chemical Indicators. Integrating Indicators are used for pack control monitoring. They can also be used as an additional monitoring tool. Emulating Indicators can be used as internal Chemical Indicators for pack control. Emulating Indicators are specified for specific sterilization cycles which means an end user will need to inventory a different Class 6 Emulating Indicator for each sterilization cycle time and temperature (e.g. 3 min and 15 min) run in the facility. The response of a Class 6 Emulating Indicator does not necessarily correlate to a Biological Indicator. Courtesy : * defintion out of the ISO , 2005, Sterilization of health care products Chemical indicators Part 1: General requirements. 188 Phone : Fax : sales@diagmed.com.au

3 Class 1 Indicators Process Indicators : Process indicators are intended for use with individual units (e.g. packs, containers) to indicate that the unit has been directly exposed to the sterilization process and to distinguish between processed and unprocessed units. They are designed to react to one or more of the critical process variables. Indicator tapes, indicator labels and load cards are examples of externally visible Chemical Indicators that are Process Indicators used for exposure control. Exposure Monitoring Exposure Monitoring products are a way for steriliser operators to know at a glance whether packs have been exposed to the sterilisation process. It assures the operator handling the processed items that the pack has been exposed to the sterilisation process without the need to open the pack. Autoclave Tape An indicator tape that reliably provides immediate identification of items processed by steam sterilisation. It also serves as a closure to seal sterilisation packs. The chemical indicator l i n e s w i l l t u r n D A R K BROWN/BLACK when exposed to a steam sterilisation process. 12mm mm mm Roll $5.00 $7.95 $10.85 CLASS 1 Lead Free Indicator Tape for Steam Sterilization Steritrax Marker Permanent marker that won't disappear under extreme conditions. Ideal for writing on surfaces that are exposed to water, heat, chemicals and abrasion. Suitable for most sterilization processes. Medimarc Permanent writing and marking on medical packaging which will not compromise the microbial integrity of a sterile pack. Bleed resistant. l Bullet tipped, black l Permanent, non-solvent based ink, waterproof and fade resistant Titems Holder Instrument protector Protects instruments during sterilisation and whilst in storage after sterilisation. l Ultra fine tip, black l Quick drying $12.95 Box/ $34.00 CLASS 1 The Effective Cleaning of Instruments and Equipment INFECTION CONTROL MICROBIOLOGICALLY TESTED Phone : Fax : sales@diagmed.com.au 189

4 Meditrax Surgery Sterilisation The MEDITRAX Surgery Sterilization & Patient Traceability module is specifically designed for surgery requirements. It is easy for staff to use and is adaptable to many different surgery settings. The MEDITRAX Surgery Sterilization & Patient Traceability module is intended to identify and log every cycle of a surgery sterilizer and any equipment which has passed through this process and has been used on a patient. To provide added security for you and your patients, you must be able to identify any sterilized item or equipment that has been used on a patient, proving that it has successfully been through a decontamination and sterilization process. Features: l Traceability from patient records to sterilizer records l Documents to AS/NZS 4815 standards l Document integrity l Full audit trail traceability l Sterilizer maintenance record l Staff data linked to the above l All materials supplied l Easy to learn $ Includes: ü 1 x Surgery log book ü 100 x Integrator labels class 6 ü 1 x Meditrax gun ü 1 x Roll adhesive labels meditrax ü 1 x Patient record pads Meditrax Consumables Meditrax Surgery Log Book Each $34.50 Meditrax Patient Record Pads Each $8.90 Meditrax Integrator Label Class Box/400 $ Meditrax Process Indicator Rolls YELLOW BLUE GREEN PINK Roll/700 $36.95 Meditrax Gun Only Each $ Meditrax Standard Ink Roller Each $ Phone : Fax : sales@diagmed.com.au

5 Attest Standard Biological Indicator Ÿ Self-contained biological indicator for 121 C gravity/132 C vacuum-assisted steam cycles Ÿ Chemical indicator on the label changes from pink to brown when processed Ÿ 48 hour incubation Ÿ Visual read out - yellow indicates surviving spores and a positive result Box/ EZ Test Biological Steam Spore Test Ÿ Self contained, easy-to-use biological indicator Ÿ 24 hour results for Steam, PPO & H2O2 Ÿ Easy to interpret dramatic colour change if spores survive Box/ $ Attest Standard Biological Ÿ 14 vial capacity - steam Ÿ Results in hours Each $ Bowie-Dick Test Pack The most commonly used Steam Penetration Test is the Bowie & Dick Test and a mandatory test required by AS 4187 and AS 4815 for vacuum assisted sterilisers. This is carried out at the beginning of each day. The Bowie & Dick Test is also used during installation qualification. The Bowie & Dick Type Test Packs are designed for use in vacuumassisted sterilisers to test the efficacy of the vacuum system to remove air from the steriliser chamber and to detect leaks in the system that would allow air into the chamber. Box/ $ CLASS 2 Green card T Air Removal & Steam Penetration Test The Green Card is designed as an environmentally safe lead free method for daily monitoring of tabletop prevacuum steam sterilizers to detect air leaks, inadequate steam penetration and vacuum pump failures. A colour change to Green indicates a Bowie-Dick Test Pass. If purple remains, a Fail is indicated. Designed for daily monitoring of small pre-vacuum steam sterilisers operating at 134 degrees Celsius. Pkt/ $43.50 CLASS 2 Phone : Fax : sales@diagmed.com.au 191

Comply Steam Chemical Indicator strips Long stripe of chemical indicator ink printed on perforated-style strip.

Indicator changes colour from white to dark brown/black when exposed to steam sterilisation conditions.

l Long indicator ink strip for a wide area of monitoring l Monitors all 121 C and 134 C gravity and vacuum-assisted steam sterilisation cycles Box/240

integrated response to defined combinations of time, temperature and presence of moist saturated steam.

based on various defined combinations of temperature, time and the presence of steam CS/1000 Pkt/250 287508 $63.

6 Comply Steam Chemical Indicator strips Long stripe of chemical indicator ink printed on perforated-style strip. Allows full- or half-length use for different pack sizes. Utilises distinct colour change to indicate process results. Indicator changes colour from white to dark brown/black when exposed to steam sterilisation conditions. l Strip turns dark once processed l For use in all steam sterilisers. l Long indicator ink strip for a wide area of monitoring l Monitors all 121 C and 134 C gravity and vacuum-assisted steam sterilisation cycles Box/ CLASS 4 Titems Monitor HP Titems Monitors HP (High Precision) are a class 4 chemical indicator designed for use in steam sterilisers, providing an integrated response to defined combinations of time, temperature and presence of moist saturated steam. l Strip turns dark once processed l For use in all steam sterilisers. l Long indicator ink strip for a wide area of monitoring l Monitors all 121 C and 134 C gravity and vacuum-assisted steam sterilisation cycles Pkt/ $15.50 CLASS 4 Titems Diagnostic Emulator Titems Emulators provide visual confirmation of correct sterilisation conditions within the sterilisation chamber based on various defined combinations of temperature, time and the presence of steam CS/1000 Pkt/ $63.00 CLASS 6 Comply Steam Sterilisation Integrators The 3M Comply moving front chemical integrator offers an immediate, accurate and easy-to-read method of monitoring sterilisation process conditions inside each pack. l Designed to mimic the biological indicator death curve l Ink migration is not affected by steriliser pre-conditioning l Permanent result for easy record keeping. l Instant results with simple accept/reject readout Pkt/ CLASS Phone : Fax : sales@diagmed.com.au

Best Practice Monitoring for Sterile Processing Professionals

Best Practice Monitoring for Sterile Processing Professionals Sterile processing departments are faced with greater challenges than ever. Increasing demands for quick turnarounds. Pressure to streamline