Release Notes for SAP Supply Chain Management Release SAP SCM 5.0

Transcription

1 Release Notes for SAP Supply Chain Management Release SAP SCM 5.0

2 Copyright Copyright(c) 2006SAP AG. All rights reserved. Neither this document nor any part of it may be copied or reproduced in any form or by any means or translated into another language, without the prior consent of SAP AG. The information contained in this document is subject to change without notice. SAP is a registered trademark of SAP AG. All other products which are mentioned in this documentation are registered or not registered trademarks of their respective companies.

3 Release-Informationen Inhaltsverzeichnis SAP AG 3 SCM Supply Chain Management Roles in SCM (Changed) Structure Changes in SAP Reference IMG for SCM SCM-CA SCM Cross-Application Components SCM-CA-PER SCM Performance Cross-Application APO Performance Monitor (new) SCM-APO Advanced Planning and Optimization Structural Changes to the IMG of SAP APO SCM-APO-CA APO Cross-Application Components SCM-APO-CA-CDP Characteristics-Dependent Planning Functions in Block Planning (Enhanced) Block Planning in the DS Planning Board (Enhanced) Checks for Consistency Comparison in livecache and APO Database (New) Copy Configuration Data from Sales Order to Planned Order SCM-APO-CA-COP Collaborative Planning Collaborative Planning: r Settings and Shuffler (New) Transportation Tendering (Enhanced) SCM-APO-MD Master Data Master Data Enhancement with the Easy Enhancement Workbench (New) Master Data Locking Concept (new) SCM-APO-MD-LO Location Integration of Shipping Points (New) TP/VS-Specific Resources in the Location Master (Enhanced) SCM-APO-MD-PR Product Alternative Product Number (Enhanced) Inheritance of Product Master Attributes (New) Product Groups (New) Transportation Lanes for Product Groups (Enhanced) Consideration of Minimum Safety Stock (New) SCM-APO-MD-INC Product and Location Interchangeability Master Data for Location Interchangeability (New) Master Data for Product Interchangeability (Enhanced) SCM-APO-MD-RE Resource Resources: Logging Changes Resources: Improved Shift Maintenance in Capacity Profile (Enhanced) SCM-APO-MD-TL Transportation Lanes Product Groups (New) Transportation Lanes for Product Groups (Enhanced) 27 SAP AG iii

4 Release-Informationen Inhaltsverzeichnis SAP AG Means of Transport (Enhanced) SCM-APO-MD-PDS Production Data Structure Enhancements to the PDS: Template PDS (New), Push Production (New), BAdIs Heuristic and Consistency Check for the Production Data Structure (PDS) (New) SCM-APO-VS Vehicle Scheduling BAdIs for Transportation Planning/Vehicle Scheduling (Enhanced) Conditions (Enhanced) Consolidation (Enhanced) Schedule Heuristic Run in the Background (New) Transportation Tendering (Enhanced) New Shipment Structure (Enhanced) Order Split Based on Freight Units (Enhanced) of Transportation Zones in Transshipment Hierarchies (New) Creation of Shipments Without Vehicle Resource (New) SCM-APO-VS-RG Routing Guide Planning Dynamic Route Determination (New) SCM-APO-VS-BF Basic Functions Definition of Customer-Specific Alerts (New) Overriding the Ship-To Address (New) Control of Scheduling ERP Shipments in livecache (New) Planning Based on Shipping Points (New) Means of Transport (Enhanced) SCM-APO-VS-OPT Vehicle Scheduling Optimization Cost Profile (Enhanced) Optimization Profile (Enhanced) TP/VS-Specific Resources in the Location Master (Enhanced) SCM-APO-VS-INS Interactive VS New Fields in Interactive Planning (New) Optimization (Enhanced) Manual Overloading of Resources (New) SCM-APO-VS-CAS Selection of Transportation Service Provider Transportation Service Provider Selection (Enhanced) SCM-APO-VS-MAP Integration Control Rules (New) SCM-APO-SNP Supply Network Planning (SNP) Aggregated Planning (Enhanced) 47 SAP AG iv

5 Release-Informationen Inhaltsverzeichnis SAP AG SNP Heuristic: Direct Delivery (New) Parallel Processing Profile (Enhanced) SNP Heuristic: Consideration of the Resource Calendar (New) Consideration of the Goods Receipt Processing Time (Changed) SCM-APO-SNP-OPT SNP Plan Optimization Consideration of Scheduled and Deallocated PP/DS Planned Orders (Changed) Explanation Tool and Result Indicators for Optimization Results (New) Automatic Cost Generation for SNP and Deployment Optimizer (new) SCM-APO-SNP-INS Interactive SNP Reference of a Key Figure to a Variable Planning Version (Enhanced) SCM-APO-SNP-DPL Deployment Consideration of Demand at the Source Location (Enhanced) Explanation Tool and Result Indicators for Optimization Results (New) SCM-APO-SNP-TLB Transport Load Builder Interactive TLB Planning (Enhanced) SCM-APO-SNP-SFT Safety Stock Planning Extended Safety Stock Planning (Enhanced) SCM-APO-SNP-CAP Capacity Leveling Consideration of Scheduled and Deallocated PP/DS Planned Orders (Changed) Capacity Leveling: Consideration of Alternative Resources (Enhanced) SCM-APO-SDM Multilevel Supply & Demand Matching SCM-APO-SDM-CTM Capable-to-Match Aggregated Planning with Capable-to-Match (New) Explanation Function and Results Indicators in Capable-to-Match (New) Capable-to-Match (CTM) (Enhanced) Build Up Safety Stock in CTM (Enhanced) SCM-APO-FCS Demand Planning Key Figure Properties for DP Planning Areas (Enhanced) BI Authorization Concept in Demand Planning (DP) Change Mode for Key Figures (New) Demand Combination (New) Combined Forecast (Enhanced) Forecast Horizon and History Horizon (Changed) Data Realignment of InfoCubes in Demand Planning (DP) SAP AG v

6 Release-Informationen Inhaltsverzeichnis SAP AG (Enhanced) Uploading Data to Demand Planning (New) Locking Logic in Demand Planning (DP) (Enhanced) MacroBuilder in Demand Planning (DP) (Enhanced) Time-Based Demand Distribution (New) TSDM Data in Demand Planning (DP) (Enhanced) Differentiation of Initial Values and 0 Values (New) SCM-APO-FCS-SEA Seasonal Planning Seasonal Planning (New) SCM-APO-SPP Service Parts Planning Service Parts Planning (New) SCM-APO-PPS Production Planning and Detailed Scheduling Project Manufacturing and Make-to-Order Manufacturing (Enhanced) BAPI for Production Planning Run (New) Characteristics-Dependent Planning: Reorganization (New) Changes to Header Quantity for Released Manufacturing Orders (Changed) CTP and Multilevel ATP Check (Enhanced) Underdelivery Tolerance in Net Requirements Calculation Withdrawal from Alternative Plant (New) PP/DS Horizon: Field Extended to 4 Places Multilevel Planning without Final Assembly (New) Production Planning Run (Enhanced) Integration of PP/DS Processes in BI Process Chains (New) Consider Assembly Scrap for Make-to-Order Production (Changed) Simulation Version: Change when Calling (Enhanced) SCM-APO-PPS-PPT Product Planning Table Changes in the Product Planning Table (Changed) Flag Processed Products in Planning (Enhanced) SCM-APO-PPS-DST Detailed Scheduling Planning Board Project Manufacturing and Make-to-Order Manufacturing (Enhanced) Detailed Scheduling Planning Board: Object Selection (Enhanced) Detailed Scheduling Planning Board: Menu Path Changed (New) Detailed Scheduling Planning Board: Changes to the r Interface (Enhanced) SCM-APO-PPS-PVW Product View 97 SAP AG vi

7 Release-Informationen Inhaltsverzeichnis SAP AG Changes in the Product Planning Table (Changed) Flag Processed Products in Planning (Enhanced) Product View: Enhanced Table Display (Enhanced) Pegging Structure: Display Alerts and Sort Function (New) Visualization Profiles for Characteristics SCM-APO-PPS-POV Product Overview Flag Processed Products in Planning (Enhanced) SCM-APO-PPS-SCF Scheduling Functions Create/Delete Fixing and Planning Intervals (New) Setup Matrix (Enhanced) Strategy Profile (Enhanced) SCM-APO-PPS-FP Fixed Pegging Fixed Pegging in Backorder Processing (New) CTP and Multilevel ATP Check (Enhanced) Planning Procedure for Fixed Pegging (Enhanced) Fixed Pegging in the ATP and CTP Process (Enhanced) SCM-APO-PPS-LPP Length-Based Planning Cutting Receipts (Changed) Length Plan Consideration of Length Allowances for Operation Durations SCM-APO-PPS-MMP Model Mix Planning Model Mix Planning (Enhanced) SCM-APO-PPS-RPM Planning Matrix Rapid Planning Matrix (Enhanced) SCM-APO-PPS-HEU Heuristics Capacity-Driven Order Creation (New) Create/Delete Fixing and Planning Intervals (New) PP/DS Heuristics (Enhanced) Enhanced Backward Scheduling (New) SCM-APO-PPS-RPT Resource Planning Table Detailed Scheduling: Resource Planning Table (New) SCM-APO-ATP Global Available-to-Promise SCM-APO-ATP-BF Basic Functions Advice Code (new) SCM-APO-ATP-RND Rounding Rounding (New) SCM-APO-ATP-PSS Parameter-Dependent ATP Safety Stock Parameter-dependent ATP safety stock (new) SCM-APO-ATP-PRD ATP in Conjunction With Production Availability Check for Kits (new) CTP and Multilevel ATP Check (Enhanced) Fixed Pegging in the ATP and CTP Process (Enhanced) 128 SAP AG vii

8 Release-Informationen Inhaltsverzeichnis SAP AG SCM-APO-ATP-SCH Time and Scheduling Functions Using Dynamic Route Determination (new) Transportation and Shipment Scheduling (Extended) SCM-APO-ATP-RBA Rules-Based ATP Check Quantity conversion with various BUoMs (new) Consolidation Location (new) External Exclusions (new) Substitutions from the Product InC and Location InC Master Data (New) Multi-Item Single Delivery Location (new) Maximum Number of Substitutions in Rules (enhanced) Override Input Location (new) Preselection of Appropriate Substitutions (new) Rule Type (enhanced) Rule strategy (enhanced) Rule Strategy Sequence (New) Validity of Exclusions of an Exclusive Rule (New) Validity Periods for Substitutions (New) SCM-APO-ATP-BOP Backorder Processing Backorder processing (enhanced) SCM-APO-ATP-ODL Order Due List Order Due Lists (new) SCM-APO-ATP-EQA Event-Driven Quantity Assignment (EDQA) Event-driven quantity assignment (new) SCM-APO-ATP-TPO Third-Party Order Processing Third-Party By Source Determination and Product Allocation (New) SCM-APO-OPT Optimization SCM-APO-OPT-PPS Production Planning and Detailed Scheduling Underdelivery Tolerance in Net Requirements Calculation Explanation Log (New) PP/DS Optimization (Enhanced) Optimization Profile (Enhanced) SCM-APO-OPT-SNP Supply Network Planning Explanation Tool and Result Indicators for Optimization Results (New) Automatic Cost Generation for SNP and Deployment Optimizer (new) SCM-APO-CPR Collaborative Procurement 150 SAP AG viii

9 Release-Informationen Inhaltsverzeichnis SAP AG SCM-APO-CPR-SCH Procurement Scheduling Agreement Enhancements in the Procurement Scheduling Agreement (New) SCM-APO-INT Interfaces Saving and Deleting CIF Cockpit Performance Data (New) Collaborative Planning: Displaying Alerts Using Integrated ITS (New) SCM-APO-INT-EXT Interface to External Systems Business and Interface Objects and BAPI Methods (Changed) Collaborative Planning: Logging Function (changed) SCM-APO-INT-MD Master Data Integration of Shipping Points (New) SCM-APO-INT-STK Stock Integration of Stocks (Changed) SCM-APO-INT-PPS PP/DS - Production Process Order Changes to Header Quantity for Released Manufacturing Orders (Changed) SCM-APO-INT-RP Requirements Planning/Planned Order Multilevel Planning without Final Assembly (New) SCM-APO-INT-PUR Purchasing/Purchase Requisition, Purch. Order, Stock Transfer Integration of Stock Transport Orders (Enhanced) SCM-APO-INT-CCR CIF Compare/Reconcile CIF Comparison/Reconciliation: Processing of Change Pointers (New) Parallel Processing in the CIF Comparison/Reconciliation (New) SCM-APO-LCA SCM livecache Applications Checks for Consistency Comparison in livecache and APO Database (New) SCM-BAS SCM Basis Structural Changes in IMG for SCM Basis SCM-BAS-AMO Alert Monitor Alert Types: Changes New Features in Alert Monitor (New) Adoption of Selections in Alert Profiles After Upgrade (New) SCM-BAS-PAK Packing Basics Packaging specification (enhanced) Packaging specification determination (new) SCM-BAS-MD Master Data Master Data Locking Concept (new) SCM-EWM Extended Warehouse Management Extended Warehouse Management (new) 171 SAP AG ix

10 Release-Informationen Inhaltsverzeichnis SAP AG SCM-EWM-TM Transportation Management Structural Changes in IMG for SAP SCM in the Area of Transportation SCM-ECT Execution Structural Changes in IMG for SAP SCM in the Area of Execution SCM-EM Event Management Visibility Processes in SAP Event Management (Extended) Structure Changes in IMG for SAP EM SCM-EM-MGR Event Manager SCM-EM-MGR-ISQ Information System and Queries Connection to Document Flow (New) Web Interface (Enhanced) SCM-EM-MGR-EVP Event Processing Connection to the Alert Framework (Enhanced) SCM-EM-MGR-CON Control Processing Activate Seasonal Procurement Process (New) Connection to Document Flow (New) SCM-EM-MGR-ADM Administration Archiving and Deletion in Event Management (Enhanced) Change Documents (New) Dynamic Assignment of a URL to Alert Framework (Enhanced) Activate Seasonal Procurement Process (New) Authorization Concept for Event Handler Display (Enhanced) Connection to Document Flow (New) SCM-FRE Forecasting and Replenishment Exception Workbench (Enhanced) F&R Dispatcher (New) Replenishment Workbench (Enhanced) F&R Interfaces (Enhanced) F&R Interfaces (New) F&R Optimization Process (Enhanced) Consumption Data for SAP F&R (New) SCM-FRE-MD Master Data Business Week Definition (New) F&R Master Data (New) Product Type Identifier for Inbound Products (New) SCM-FRE-REF References Reference (Enhanced) SCM-FRE-CPF Collaborative Planning, Forecasting and Replenishment 197 SAP AG x

11 Release-Informationen Inhaltsverzeichnis SAP AG Collaborative Planning Forecasting and Replenishment (New) SCM-FRE-IF Interfaces Product Type Identifier for Inbound Products (New) SCM-FRE-DIF Demand Influencing Factor Weighting Profile DIF Type (New) SCM-FRE-SUI Replenishment Workbench for Stores Replenishment Workbench for Stores (Enhanced) SCM-ICH Inventory Collaboration Hub cfolders Integration Structural Changes in the IMG for ICH Scenario Control (New) Visible Products and Locations (Enhanced) XI Content for SAP SCM Basis (Changed) SCM-ICH-MD Master Data AFS-Specific Enhancements for Responsive Replenishment (New) SCM-ICH-REL Scheduling Agreement Release Confirmation Control (new) Due Schedule Lines (Enhanced) Goods Recipient View (New) Deviating Recipient of Ordered Products (New) Data in Release Processing (New) Functions in Release Processing (Enhanced) Receipts/Requirements List (New) Extended Confirmation Management (New) Scheduling Agreement Confirmations (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-PO Purchase Order Confirmation Control (new) Due Schedule Lines (Enhanced) Goods Recipient View (New) Confirmation Approval (New) Changeability of Purchase Order Items (New) Update of Goods Receipt Data (Enhanced) Notes (New) Data in Purchase Order Collaboration (New) Functions in Purchase Order Collaboration (New and Changed) Processes and Process Types in Purchase Order Collaboration (Changed) Scheduling in Purchase Orders (Changed) Sending Purchase Orders to the Customer Back-End System (Changed) Web r Interface for Purchase Orders (Enhanced) 233 SAP AG xi

12 Release-Informationen Inhaltsverzeichnis SAP AG Validation Checks for Purchase Orders (New) Deviating Recipient of Ordered Products (New) Receipts/Requirements List (New) Extended Confirmation Management (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-ASN Advanced Shipping Notification Data in ASN Processing (New) External ASN Validation in Service Parts Management (New) Functions in ASN Processing (Enhanced) Packaging Specification (Enhanced) Confirmation Control (new) Due Schedule Lines (Enhanced) Goods Recipient View (New) Deviating Recipient of Ordered Products (New) Receipts/Requirements List (New) Serial Numbers (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-RET Returns Goods Recipient View (New) Deviating Recipient of Ordered Products (New) Returns in Service Parts Management (New) Serial Numbers (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-IMO Inventory Monitor SMI Monitor (Enhanced) Generation of Inventory Alerts for SMI (Changed) Delivery Control Monitor (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-KNB Kanban Kanban (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-SNI Supply Network Inventory SNI Monitor (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-SCO Supplier Confirmations Confirmation Control (new) Receipts/Requirements List (New) Extended Confirmation Management (New) Scheduling Agreement Confirmations (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-FCS Forecast 268 SAP AG xii

13 Release-Informationen Inhaltsverzeichnis SAP AG AFS-Specific Enhancements for Responsive Replenishment (New) Key Figure Selection (New) SCM-ICH-NDC Net Requirements Calculation AFS-Specific Enhancements for Responsive Replenishment (New) Key Figure Selection (New) Consideration of Minimum Safety Stock (New) SCM-ICH-PRO Promotion Planning AFS-Specific Enhancements for Responsive Replenishment (New) Key Figure Selection (New) Cannibalization Effect of Promotions (New) Comparison of Promotions (New) Complex Shipping Units (New) Interchangeability in RR (New) Activity Status "Introduction" (Enhanced) Post Promotion Dip (New) Percentage Promotion (New) Usability in PP (Enhanced) Usability in RR (Enhanced) SCM-ICH-DIO Inbound/Outbound Data Processing AFS-Specific Enhancements for Responsive Replenishment (New) Addresses (Enhanced) Logical Business Partner Role in ICH (Enhanced) Process Type Definition (Enhanced) Time Stamp Format of Outbound Messages (Enhanced) Validation Framework (Enhanced) Deviating Recipient of Ordered Products (New) SCM-ICH-AMO Alert Monitor AFS-Specific Enhancements for Responsive Replenishment (New) Time Zones in Supplier Collaboration (Enhanced) SCM-ICH-ERP ERP-ICH Integration (ERP Only) Kanban Master Data Transfer to SAP ICH (new) Data Transfer for Contract Manufacturing (New) Transfer of Requirements and Stock to SAP ICH (extended) 292 SAP AG xiii

14 3 SCM Supply Chain Management 3.1 Roles in SCM (Changed) As of SAP SCM 5.0, a number of new and modified roles are available. For more information about these roles, see the SAP Library under SAP Supply Chain Management -> Roles. 3.2 Structure Changes in SAP Reference IMG for SCM 5.0 As of SAP SCM 5.0 the implementation guide (IMG) structure of SAP Supply Chain Management (SAP SCM) has changed. If structure changes were made in the SAP reference IMG, you will find the corresponding Release Notes in the individual IMG areas. To find these Release Notes, proceed as follows: 1. Call the entire list for SCM Search the list for the expression Structure. 3. To find further entries, continue the search. Below are the changes and main structure Release Notes: - The component Extended Warehouse Management (SCM-EWM) was added. You can find the IMG activities for this component in the IMG under Extended Warehouse Management. - Structure changes in IMG for SAP APO - Structure changes in IMG for SCM Basis - Structure changes in IMG for SAP SCM in the Execution area - Structure changes in IMG for SAP EM - Structure changes in IMG for ICH To include these changes in the project IMGs, you must generate the project IMGs anew. SAP AG 1

15 3.3 SCM-CA SCM Cross-Application Components SCM-CA-PER SCM Performance Cross-Application APO Performance Monitor (new) As of SAP SCM 5.0, the APO Performance Monitor is available to you for analyzing and monitoring performance in SAP Advanced Planning and Optimization (SAP APO). The APO Performance Monitor collects general and performance-relevant data for individual applications, and displays this in the form of overviews. You can use these overviews for example to determine the performance behavior during a planning run, or the direction in which the performance is tending towards across multiple planning runs. Since you are given detailed information about the individual phases of a planning run, you are able to locate any existing performance problems quickly. You can use the APO Performance Monitor to fulfill the following tasks: - Performance analysis for demand planning The system displays the following overviews: - Planning Area Overview - Statistics: Mass Processing - Statistics: Calculation of Proportional Factors - Performance analysis for Supply Network Planning (SNP) The system displays the following overviews: - Statistics: SNP Optimizer - Statistics: SNP Heuristic - Performance analysis for Multilevel Supply and Demand Matching (SDM) The system displays the following overviews: - Statistics: CTM Planning Run - Performance analysis for Production Planning and Detailed Scheduling (PP/DS) The system displays the following overviews: SAP AG 2

16 - Statistics: PP/DS Optimizer - Performance analysis for Global Available-to-Promise (ATP) The system displays the following overviews: - Backorder processing To delete performance data at regular intervals, a deletion program is also available for you to use. You can the APO Performance Monitor from the SAP menu, under SCM Basis -> Performance Monitor -> APO Performance Monitor. From here, you can call the different overviews for the performance analysis. 3.4 SCM-APO Advanced Planning and Optimization Structural Changes to the IMG of SAP APO As of SAP SCM 5.0, the structure of the Implementation Guide (IMG) of SAP APO has changed. You must regenerate the project IMGs to transfer these changes. Deleted IMG Activities - IMG for Master Data All the IMG activities under Master Data -> Model and Version Management -> Business Add-Ins for the Planning Version Copy have been deleted and replaced by two new ones (see New IMG Activities). - IMG for Vehicle Scheduling - Define Dimensions/Units - Maintain TSP Profile - IMG for Demand Planning (DP) The IMG activity Maintain Customer-Specific Macros under Enhancements has been deleted. New IMG Activities - IMG for Master Data - Master Data -> Classification and Configuration -> Business Add-Ins (BAdIs) for Classification and Configuration -> BAdI: Additional Customer-Specific Checks for OM17 SAP AG 3

17 - Master Data -> Product -> Product Groups -> Define Product Group Types - Master Data -> Product -> Product Groups -> Define Product Groups - Master Data-> Product -> Maintain Alternative Product Number Type - Master Data-> Product -> Define Replenishment Indicator - Master Data -> Product -> Define ABC Indicator - Master Data -> Resource -> Business Add-Ins (BAdIs) for Resources -> Block Planning - Master Data -> Transportation Lane -> Maintain Transportation Mode - Master Data -> Model and Version Management -> Business Add-Ins for the Planning Version Copy -> BAdI: Deactivate CIF Before Copying Planning Version - Master Data -> Model and Version Management -> Business Add-Ins for the Planning Version Copy -> BAdI: Activate CIF After Copying Planning Version - IMG for Detailed Scheduling - Advanced Planning and Optimization -> Supply-Chain Planning -> Production Planning/Detailed Scheduling (PP/DS) -> Detailed Scheduling All the IMG activities that are valid for the detailed scheduling planning board and the resource planning table are new. - Advanced Planning and Optimization -> Supply-Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Detailed Scheduling -> Settings for the Resource Planning Table All the IMG activities that are valid for the resource planning table only are new. - IMG for Production Planning and Detailed Scheduling (PP/DS) - Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Length-Based Planning -> Assign Characteristics - Supply Chain Planning -> Production Planning and Detailed Scheduling -> Business Add-Ins (BAdIs) for PP/DS -> Sorting LPP Receipts Before Requirement Coverage - Supply Chain Planning -> Production Planning and Detailed Scheduling -> Detailed Scheduling -> Settings for the Resource Planning Table -> Create Button and Period Profiles - IMG for Vehicle Scheduling - Transportation Planning and Vehicle Scheduling (TP/VS) -> Basic Settings -> Define Customer-Specific Alerts - Transportation Planning and Vehicle Scheduling (TP/VS) Basic Settings -> Define Number Range for One-Time Locations - Transportation Planning and Vehicle Scheduling (TP/VS) -> Dynamic Route Determination -> Activate Dynamic Route Determination - Transportation Planning and Vehicle Scheduling (TP/VS) -> Dynamic Route Determination -> Define Strategy - Transportation Planning and Vehicle Scheduling (TP/VS) -> Dynamic Route SAP AG 4

18 Determination -> Define Methods - Transportation Planning and Vehicle Scheduling (TP/VS) -> Dynamic Route Determination -> Assign Methods to a Strategy - Transportation Planning and Vehicle Scheduling (TP/VS) -> Dynamic Route Determination -> Define Parameters - Transportation Planning and Vehicle Scheduling (TP/VS) -> Dynamic Route Determination -> Assign Method Parameters to a Strategy - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Interactive Planning -> BAdI: Enhancement to Object Display on Map - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Interactive Planning -> BAdI: Additional Buttons for Interactive Planning - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Transportation Service Provider Selection -> BAdI: Control Optimization Data Before Saving - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Transportation Service Provider Selection -> BAdI: Control Optimization for TSP Selection - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Transportation Service Provider Selection -> BAdI: Deactivation of Planning Book - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Dynamic Route Determination -> BAdI: Enhancements to Cost Determination in Routing Guide - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Dynamic Route Determination -> BAdI: Enhancements to Geography in Dynamic Route Determination - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Dynamic Route Determination -> BAdI: BAdI Methods in Routing Guide - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Dynamic Route Determination -> BAdI: Adjustment of Shipments for Delivery Group Correlation - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Dynamic Route Determination -> BAdI: BAdI-Based Sorting of Routing Guide Results - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Dynamic Route Determination -> BAdI: Mapping of Data from ATP Tables to Freight Units - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Interfaces -> Enhancements for Using One-Time Locations -> BAdI: Own Address Search - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Interfaces -> Enhancements for Using One-Time Locations -> BAdI: SAP AG 5

19 Adjustment of Location Data for One-Time Addresses - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Interfaces -> BAdI: Enhancements to Inbound Communication - Transportation Planning and Vehicle Scheduling (TP/VS) -> Business Add-Ins (BAdIs) for TP/VS -> Scheduling -> BAdI: Enhancements to Shipment Creation - IMG for Global Available-to-Promise (Global ATP) - General Settings -> Specify Advice Code - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Create Field Catalog - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Define Condition Tables - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Define Access Sequences - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Define Condition Types - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Define Determination Procedure - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Determine Condition Maintenance Groups for Context - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Create Condition Maintenance Group - Transportation and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling -> Assign Schema and Activity to a Condition Type List - Transportation and Shipment Scheduling -> Activate Extended Scheduling - Product Availability Check -> Consider Confirmed Quantity of Receipts - Product Availability Check -> Parameter-Dependent ATP Safety Stock -> Maintain Field Catalog - Product Availability Check -> Parameter-Dependent ATP Safety Stock -> Maintain PASS Settings - Product Availability Check -> Pick from Goods Receipt-> Define Settings - Product Availability Check -> Pick from Goods Receipt-> Generate Settings Automatically - Rules-Based Availability Check -> Maintain Rule Strategy Sequence - Rules-Based Availability Check -> Activate Multi-Item Single Delivery Location - Third-Party Order Processing All the IMG activities under this node are new. - Backorder Processing ->Define Variant-Dependent Special Sorting - Backorder Processing ->Configure Order Due Lists (Worklist) SAP AG 6

20 - Backorder Processing -> Parallelizing Backorder Processing - Event-Driven Quantity Assignment All the IMG activities under this node are new. - Enhancements -> Availability Check -> BAdI: Parameter-Dependent ATP Safety Stock - Enhancements -> ATP Controller -> BAdI: Enhancement of Field Catalog for Rounding - Enhancements -> ATP Controller -> BAdI: Restriction of Supplier Selection - Enhancements -> Rules -> BAdI: Maintenance of Rules-Based ATP Master Data - Enhancements -> Rules -> Multi-Item Single Delivery Location -> Notes on Implementation - Enhancements -> Rules -> Multi-Item Single Delivery Location -> BAdI: Multi-Item Single Delivery Location (MISL) - Enhancements -> Rules -> Multi-Item Single Delivery Location -> BAdI: Location List for Multi-Item Single Delivery Location (MISL) - Enhancements -> Rules -> Multi-Item Single Delivery Location -> BAdI: Result for Multi-Item Single Delivery Location (MISL) - Enhancements -> Rules -> BAdI: Characteristic Substitution - Enhancements -> Rules -> BAdI: Preselection of Suitable Substitutions - Enhancements -> Rules -> Backorder Processing -> BAdI: Grouping of Items for Parallel Check - Enhancements -> Backorder Processing-> BAdI: Results Transfer for Outbound Delivery Documents - Enhancements -> Event-Driven Quantity Assignment All the IMG activities under this node are new. - IMG for Service Parts Planning All the IMG activities under Service Parts Planning (SPP) are new. - IMG for Product and Location Interchangeability - Application Settings -> General Settings - Business Add-Ins (BAdIs) for Product and Location Interchangeability -> BAdI: External Customer Enhancements - IMG for Capable-to-Match (CTM) - Specify Advice Code - IMG for Demand Planning (DP) - Basic Settings -> Demand Combination -> Make General Settings - Basic Settings -> Demand Combination -> Specify Activity Parameters - Basic Settings -> Demand Combination -> Specify Activity Classes - Business Add-Ins (BAdIs) -> Release SNP/DP -> Change Period Split Profile When SAP AG 7

21 DP Released to SNP - Business Add-Ins (BAdIs) -> Macro Builder -> Additional Functions for Macros Renamed IMG Activities - IMG for Master Data The IMG activity Maintain Product-Relevant Hierarchy is now called Maintain Product-Relevant Hierarchies and Hierarchy Structures. - IMG for Detailed Scheduling The IMG activity Maintain Period Profiles is now called Define Period Profiles for Resource Utilization. - IMG for Global Available-to-Promise The IMG activity Assign Rule Strategy is now called Assign Rule Strategy or Rule Strategy Sequence. - IMG for Product and Location Interchangeability - The IMG activity Maintain Attribute Properties is now called Maintain Attribute Properties for Supersession Chains. - The IMG activity Maintain Interchangeability Types and Assign Replacement Types is now called Maintain Interchangeability Group Types and Assign Replacement Types. - The IMG activity Consistency Checks is now called BAdI: Consistency Checks. - The IMG activity Interface Enhancements is now called BAdI: Interface Enhancements. - The IMG activity Interchangeability Master Data Maintenance is now called BAdI: Master Data Maintenance for Product and Location Interchangeability. - The IMG activity Rule Resolution is now called BAdI: Rule Resolution. - The IMG activity Group Filter is now called BAdI: Group Filter. - The IMG activity XML Upload of Product Interchangeability Groups is now called BAdI: XML Upload of Interchangeability Groups. Renamed IMG Structure Nodes - IMG for Master Data The structure node Product Interchangeability is now called Product and Location Interchangeability. Reassigned IMG Activities - IMG for Detailed Scheduling You can now find the following IMG activities under Advanced Planning and Optimization -> Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Detailed Scheduling: - Maintain Strategy Profiles - Maintain Heuristics - Maintain Heuristics Profiles - Maintain Work Areas SAP AG 8

22 - Maintain Optimization Profiles - Maintain Propagation Ranges - Maintain Overall Profiles - Maintain Time Profiles These IMG activities were previously found under Advanced Planning and Optimization -> Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Detailed Scheduling Planning Board. You can now find the following IMG activities under Advanced Planning and Optimization -> Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Detailed Scheduling -> Settings for the Detailed Scheduling Planning Board: - Define Period Profiles for Resource Utilization - Maintain Planning Board Profiles - Define Functions for the Toolbar in the Detailed Scheduling Planning Board These IMG activities were previously to be found under Advanced Planning and Optimization -> Supply Chain Planning -> Production Planning and Detailed Scheduling(PP/DS) -> Detailed Scheduling Planning Board. - IMG for Global Available-to-Promise (Global ATP) - The IMG activity Define Condition Table for Scheduling can now be found under Transportation and Shipment Scheduling -> Scheduling Using the Condition Technique. This activity was previously found under Transportation Planning and Shipment Scheduling. - The IMG activity Maintain Access for Scheduling can now be found under Transportation Planning and Shipment Scheduling -> Scheduling Using the Condition Technique. This IMG activity was previously found under Transportation Planning and Shipment Scheduling. - The IMG activity Maintain Control for Scheduling can now be found under Transportation Planning and Shipment Scheduling -> Scheduling Using the Condition Technique. This activity was previously found under Transportation Planning and Shipment Scheduling. - The IMG activity Determine Assignment of Item Category to Process Alias can now be found under Transportation Planning and Shipment Scheduling -> Scheduling Using Configurable Process Scheduling. This activity was previously found under Transportation Planning and Shipment Scheduling -> Interfaces. - The IMG activity Maintain Filter Category can now be found under Backorder Processing, and under Event-Driven Quantity Assignment. This activity was previously found under Tools. - The IMG activity Define Sort Profile can now be found under Backorder Processing, and under Event-Driven Quantity Assignment. This activity was previously found under Tools. - The IMG activity Define Special Sorting can now be found under Backorder Processing, and under Event-Driven Quantity Assignment. This activity was previously found under Tools. - The IMG activity Define Check Level can now be found under Backorder Processing. This SAP AG 9

23 activity was previously found under Tools SCM-APO-CA APO Cross-Application Components SCM-APO-CA-CDP Characteristics-Dependent Planning Functions in Block Planning (Enhanced) Create Block Basis Definitions As of Release SAP SCM 5.0, you can create block basis definitions via Advanced Planning and Optimization -> Master Data -> Resource -> Block Basis Definitions. However, you can still create block basis definitions in resource maintenance. Where-d List for Class or Block Basis Definition in a Resource You can run a where-used list for classes or selected block basis definitions in resources via Advanced Planning and Optimization -> Master Data -> Resource -> Block Basis Definitions. Evaluate Changes to Block Basis Definitions In the BAdI Block Planning (/SAPAPO/MCO1_BLK), you can use the method Publish Changes to Blocks When Saving (BLOCK_CHANGES_PUBLISH) to evaluate changes to block basis definitions when saving, for example, to transfer these to an external system. You can access the BAdI in Customizing under Advanced Planning and Optimization -> Resource -> BAdIs for Resources -> Block Planning. Move Blocks by Productive Time When moving blocks in block maintenance for the resource, you can choose if the productive time is considered, or if the block is moved by hours or calendar days. Consider Downtimes The system considers the downtimes maintained for a resources when the productive time is calculated SAP AG 10

24 for blocks. Maintain Attributes for Several Blocks Simultaneously You can maintain different indicators for several simultaneously in block maintenance: - Fix blocks - Protect blocks - Specify scheduling at block limits - Set number for block basis definitions - Specify block tolerances See also: Block Planning in the DS Planning Board Block Planning in the DS Planning Board (Enhanced) Blocks as Inbound Parameters in Heuristics Previously, you could only use resources as inbound parameters for the heuristics SAP_CDPBP_01 and SAP_CDPBP_02. As of Release SCM 5.0, you can also select blocks and use these as inbound parameters for heuristics. Blocks as Inbound and Outbound Parameters for Enhancements in the DS Planning Board As of Release SCM 5.0, you can specify blocks as inbound and outbound parameters for the following enhancements: - Select Objects in the DS Planning Board (APOCDPS8) - Read and Change Objects from the DS Planning Board(APOCDPS0) - Choose Objects for Production Planning Run (APOCDPS1) You can access the enhancements via Customizing under Advanced Planning and Optimization -> Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Enhancements. Block Maintenance as Heuristic The block maintenance for the resource is available as the heuristic SAP_CDPBP_04 (call up block maintenance interactively). SAP AG 11

25 Adjust Function Keys When accessing block maintenance from the DS planning board, the system displays it in a dialog box. As of SCM 5.0, the function keys for returning to the DS planning board and calling up block maintenance as a full screen have been changed: - Function key F8: Return to DS Planning Board - Function key STRG F8: Call Block Planning as Full Screen Display Blocks in the DS Planning Board In Customizing for planning board profiles, you can define if blocks are displayed as bars or lines in the DS planning board. The planning board profile was enhanced with the indicator Blocks Display. - When the blocks are displayed as bars, the block description is displayed directly on the bar. - When the blocks are displayed as lines, the block description is displayed as a quick info. Fix Blocks in the DS Planning Board Blocks can be fixed in the DS planning board. If the blocks are displayed as bars, the fixed blocks are marked by a red line in the display. When the blocks are displayed as lines, the quick info will contain the word Fixed. BAdI Method for Displaying Block Descriptions In BAdI Change Data for Block Planning (/SAPAPO/CDPS_BLKDATA), you can use the method Change Block Texts in DS Planning Board BLOCKDESCR_CHANGE to create a customer-specific description for blocks in the DS planning board. You can access the BAdI in Customizing under Advanced Planning and Optimization -> Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Business Add-Ins (BAdIs) for PP/DS -> Change Data for Block Planning. Settings in the Strategy Profile for Block Planning In the expert view of the strategy profile, there are two new fields for controlling block planning. You can find these fields on the General Strategy Parameters tab page in the Other Parameters screen area: - Block Planning You can use this field to deactivate block planning or remove the fixing of blocks. - Schedule on Block Limits You can use this field to switch off scheduling on block limits in order to carry out more detailed planning for specific operations in a block. SAP AG 12

26 See also Functions in Block Planning Checks for Consistency Comparison in livecache and APO Database (New) As of SAP SCM 5.0, you can use a check for block planning and activities for the consistency comparison in the livecache and the APO database under Advanced Planning and Optimization -> APO Administration -> livecache/ LCA Routines -> Tools -> livecache Consistency Check. You can use the BAdI Additional Customer-Specific Checks for OM17 (/SAPAPO/OM_SYNC) to carry out additional customer-specific checks for the consistency comparison Copy Configuration Data from Sales Order to Planned Order If you manually create a planned order for a sales order in the product view, the system copies the characteristic value assignments for CDP from the assigned requirements elements in the planned order. However, you must carry out planning in make-to-order production, and there must be requirements with unique characteristic value assignments. SAP AG 13

27 SCM-APO-CA-COP Collaborative Planning Collaborative Planning: r Settings and Shuffler (New) r Settings Hitherto, you could only make user settings for the external partner in Collaborative Supply and Demand Planning (such as the display of a graphic in the Internet planning book) by means of user parameters. As of SCM 5.0, a transaction is available to you for these settings. From the SAP Easy Access screen, choose Advanced Planning and Optimization -> Supply Chain Cooperation -> Environment -> Current Settings -> r Settings for Collaborative Supply and Demand Planning. Shuffler Previously, you had to create and assign selections to the external partner in interactive planning for Demand Planning or Supply Network Planning (SNP). As of SAP SCM 5.0, you can specify in the a.m. user settings that a shuffler is available to the external partner, with which he can create, change, or delete selections himself (it is only possible to change and delete if he is the creator of the selection). The selections created by him are automatically assigned to the user. Furthermore, the partner can then also load data without saving it in a selection. This function corresponds to the shuffler function in interactive Demand Planning or interactive SNP. You can also specify in the user settings that the partner can directly define the header information for the drilldown mode in the Internet planning book. Effects on System Administration If you are upgrading from an earlier SAP SCM release to SAP SCM 5.0, the system takes already existing user settings that you have made with the user parameters into account. If you have both specified user parameters and made settings in the new transaction, the system takes the settings of the new transaction into account Transportation Tendering (Enhanced) As of SAP SCM 5.0, you can monitor shipment tenderings. To do this, you can use the report /SAPAPO/VS_MONITOR_TENDER (transaction /SAPAPO/VS61). To call the report, on the SAP Easy Access screen, choose Advanced Planning and Optimization -> Transportation Planning/Vehicle SAP AG 14

28 Scheduling -> Planning -> Collaborative Transportation Planning -> Monitoring Tenderings. You can also schedule the monitoring of shipment tenderings in the background. To do this, you can use the report /SAPAPO/VS_MON_TENDER_SCHED (transaction /SAPAPO/VS611). To call the report, on the SAP Easy Access screen, choose Advanced Planning and Optimization -> Transportation Planning/Vehicle Scheduling -> Planning -> Planning in the Background -> Schedule Monitoring of Tendering. As of SAP SCM 5.0, you can also control whether dates/times that the transportation service provider has changed during transportation tendering are to be adjusted manually or automatically in the Transportation Planning/Vehicle Scheduling (TP/VS) component. Effects on Customizing See also To control the adjustment of TSP dates/times, choose the TSP Dates/Times indicator in Customizing for TP/VS under Basic Settings -> Basic Settings for Vehicle Scheduling. For more information about the two reports, see the SAP Library under Transportation Management -> Transportation Planning//Vehicle Scheduling (TP/VS) -> Collaborative Transportation Planning -> Monitoring of Shipment Tenderings SCM-APO-MD Master Data Master Data Enhancement with the Easy Enhancement Workbench (New) To enhance the master data fields in the customer name space provided by SAP, you can add extra fields using the Easy Enhancement Workbench (EEW) that is available as of SAP SCM 5.0. The newly created fields appear on the respective tab page in the Enhancement Fields frame. This frame is only visible if you use the enhancement. You can use individual or mass maintenance to edit the enhancement fields. You can use EEW to enhance the following master data objects and master data subobjects: - Location - Location header - Product - Storage data - Product header - Location product SAP AG 15