Structural Grid CREDIT: CAMAR, DARIA, DOMINIQUE, JOSE

Transcription

1

2 Structural Grid

3 Mechanical Room

4 Vertical Circulation

5 Egress

6 Egress

7 Egress

8 Temperature Range

9 Zoning & Land Use

10 Traffic and Noise Map Flatbush ext. And Tillary ave have the most traffic which creates the most noise, and exhaust

11 Circulation Map A,C, 2,3 R F 4,5 Site Subway Bike Route Green Space

12 Sun Path

13 Surrounding Building Heights

14 Views to and from the building

15 Views around the site

16 Guggenhiem Museum

17 MoMA

18 Museum of the City of New York

19 Team program of spaces A list of what is in the building 1 level 1- MAIN ENTRANCE 2- COAT ROOM 3- CONFERENCE ROOM 4-SMALL EXHIBITION 5-LOADING DOCK 6- TEMP CLASSROOM 7-TEMP CLASSROOM 8-CAFÉ 9-SHOP 10-LOBBY 2 level 11- SMALL EXHIBITION 12- DANCE CR. 13- OFFICE 14- AUDITORIUM 15- SMALL EXHIBITION 16-LARGE EXHIBITION 17-MAIN EXHIBITION BASEMENT 18- SCULPTURE CR. 19- UTILITY ROOM 20- STORAGE 21- WORKSHOP 22- BATH 23- MECHANICAL A list of what is missing but should be included -Redistribution of existing spaces and re-doing bathrooms to meet commercial AIA standards

20 Aluminum Curtain walls Structural glazing Glass Fin steal connections. Fin supported glass walls offer the most transparency in single or double glazed walls as the support structure daria

21 Curtain wall Advantages One major advantage of aluminium curtain walls is that it allows filtration of natural light into the building. Additionally, it prevents air and moisture from entering into the structure. They can also act as a fire stop, preventing the spread of fire from floor to floor of the building structure. The walls help in the transfer of horizontal wind loads that are incidental upon it to the main building structure through the connections at floors of the building. It is also designed to being air resistant and allowing water infiltration, sway induction by wind and forces acting against the building.

22 Precast concrete wall solid panel Solid wall panel simply refers to walls being made of solid concrete as opposed to including integral insulation. These wall systems require some form of insulation and an interior wall/finishing system to complete the building enclosures. Typical widths: 4 to 15 ft. Typical heights: 10 to 50 ft. -contemporary/ Typical thicknesses: 4 to 12 in. daria

23 Precast concrete wall solid panel (interior) html daria

24 Spandrel Panel Ribbon Glazing domonique

25 Site Cast Concrete Exposed Fine Aggregate Fine aggregate range between 3/8 and 1.5 inches in diameter. The shape and texture of aggregate affects the properties of fresh concrete. domonique

26 Fiber Reinforced Plastic (FRP) Fibre-reinforced plastic (FRP) (also fibre-reinforced polymer) is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper or wood or asbestos have been used. The polymer is usually an epoxy, vinylester or polyesterthermosetting plastic; phenol formaldehyde resins are still in use. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

27 Precast Concrete Composite

28 Structural Sealant Glazing with Vision Glass CREDIT: CAMAR

29 Ribbed Panel Precast Concrete Wall CREDIT: CAMAR