Energieeffizienz in Gebäuden

Transcription

1 Energieeffizienz in Gebäuden AHK-business trip energy efficiency Ireland, , Dublin Sören Hoffmann Manager/Sales International PRINZ Deutschland GmbH

2 PRINZ Deutschland GmbH Branch Germany of PRINZ GmbH & Co KG Company presentation Segments are wall saw technology, diamond chain saw technology und sawmill technology System distributor in the renovation industry Location Germany: Haselbachtal / near Dresden

3 Company presentation Since 1992 we have been busy in the country-wide and european marketing and service of the PRINZ wall saw technology In our main segment wall saw technology we are one of the leading companies Direct marketing in germany to executing companies of the renovation industry European distribution partner in: Austria, Czech Republic, Poland, Croatia, Serbia, Italy, and Bosnia, Direct marketing to Belgium, Slovenia, Hungary, Ireland, Netherlands, Annual turnover 1,5 Mio. Employee total 9

4 Exportcountry Ireland Why Ireland? Ireland is for PRINZ interesting because: Renovation potential of the buildings for the purpose of the energy transition favourable geographic location good expericene in the recent past Aims and Motivation of the Exports to Ireland Rise the publicity of our brand and our products and solutions Start a cooperation with local distribution partner Acess to local construction or renovation companies and architects

5 segment wall saw technology PRINZ- wall saw technology and materials, for a new mechanical horizontal insulation against rising damp of buildings with the chain saw and diamond wire saw method PRINZ is a system distributor Machines Chain, guide bar and diamond wire

6 Waterproofing products segment wall saw technology Tools

7 PRINZ Draining of brickwork Moisture in building walls can be traced back to a number of causes: Direct effect of water due to defective roofs, down spouts, water pipes or splashed water. Formation and accumulation of condensation as a result of improper ventilation or faulty construction. Capillary moisture in the wall due to missing or faulty waterproofing. This requires particularly careful treatment. Draining of brickwork by means of the sawing process is gaining importance in the building sanitation industry. Here one can achieve a 100% sealing effect against moisture, provided that the work is done professionally.

8 System Draining of brickwork 1. Remove connections or other hindrances. Release construction joint in brick wall. 2. Sectional removal of the wall work with PRINZ chainsaw PMS 25, EED 3.5 or PES 1300 for brick walls similarly removal with PRINZ diamond wire saw LP1 for rubble stone or mixed walls. Thus, the length of cut of up to 1.00 m is suited to the constructional and static conditions present. Overview of work

9 System Draining of brickwork Overview of work

10 System Draining of brickwork Overview of work

11 System Draining of brickwork 3. Introduction of a capillary waterproof blocking layer made of glass fibre reinforced plastic plates (thickness 1.2 and/ or 1.8mm), or HD-polyethylene plates (thickness 1.5 and/or 2.0mm) including plaster residue. Overlapping of the plate size minimum 10cm. Finally fastening the cut joint with static load bearing plastic wedge plates, at a distance of maximum 25cm over the entire wall cross section (load bearing capacity minimum 500 kp/cm2). Overview of work

12 System Draining of brickwork Overview of work

13 System Draining of brickwork Overview of work

14 System Draining of brickwork Overview of work

15 4. Filling of mortar on all sides of the cut joint and installation of pipe connections between the wedges with final positive compaction of hollow area with the PRINZ concrete injection pump BMP 6, containing contraction-free, hardening mortar that is sulphate resistant. System Draining of brickwork Overview of work

16 System Draining of brickwork Overview of work

17 completed later horizontal insulation System Draining of brickwork Overview of work

18 Graph horizontal insulation Cut the wall, by a carbide tipped chain saw, diamond wire saw or diamond chain saw Put in the insulationfoil Section of masonry Cutting direction Wall thickness Drive in the plastic wedges over the whole thickness of the wall Grouting the jointcut

19 Advantages wall saw method System wall saw method Here one can achieve a 100% sealing effect against moisture, provided that the work is done professionally and conscientiously Proven materials with regard to the chemical and mechanical stress in the wall Long time System (since app. 35 Years) The System of the wall saw method very easily traceable fot the customers

20 Reference wall saw method Reference wall saw method Federal Ministry for Economic Affairs and Energy, Berlin Technical University of Dresden Senckenberg Nature Research Society, Frankfurt am Main

21 segment sawmill technology All from the one source Complete supplier in the chainsaw business Know-How, machines and accessories for all chainsaw manufacturers!

22 Package cross-cut saws segment sawmill technology Bow saws mobile saw Complete solutions

23 Thank s for you attention! Sören Hoffmann Manager / Sales International PRINZ Deutschland GmbH Bahnhofstraße 1b, D Haselbachtal phone: /34950 mobil: / s.hoffmann@prinz24.com