CITY OF LEE S SUMMIT PUBLIC WORKS DEPARTMENT
|
|
|
- Molly Carr
- 6 years ago
- Views:
Transcription
1 CITY OF LEE S SUMMIT PUBLIC WORKS DEPARTMENT APPROVED PRODUCTS LIST FOR WATER UTILITIES This document is provided as a benefit to contractors and suppliers who are performing work in the City of Lee s Summit. The Approved Products List for Water Utilities shall not be used as a substitute for catalog cuts, certifications or shop drawings. This list is updated periodically. The products indicated on the list are approved, but are subject to final field inspection before acceptance. Vendors wishing to add a product to the list shall submit a Water Utilities Product Evaluation Form with supporting documentation to the Public Works Engineering Department. Vendors may also submit items, at no cost to the City, for evaluation. The City may test new water and wastewater products. Once a product has been added to the approved products list, minor product changes do not require an evaluation, although the vendor shall submit specification sheets and a sample of the product for the City to inspect. During an initial review, the following will be considered: Does the documentation received indicate that the product will perform as stated? Does a true need exist for the product in Lee s Summit? Will the product be economically competitive? Will the product function properly with existing City facilities? Will new equipment and new skills be needed to maintain the product? The vendor supplying the product shall provide specifications and a certification that the product meets and or exceeds City specifications before any testing is performed. Products that are not performing satisfactorily will be removed from the approved products list if the vendor cannot provide timely correction of the problem. If a vendor is proposing a product that does not meet City specifications, an explanation of why the product meets or exceeds the current specifications must be provided by the vendor in writing. If approved, the product may be tested to determine if the product is satisfactory. If the product is satisfactory, the City will consider a revision to the applicable specifications. Products will not be added to the Approved Products List that do not meet City specifications. Products not performing as required or not supported by vendors or manufacturers are subject to removal from the list. Grounds for removal of products may include, but are not limited to: Significant change in product specifications or design without notification to the City, Failure to correct or replace products that are defective in manufacturing or workmanship, Repeated patterns of malfunction of a product not adequately corrected by vendor, Unreasonable pricing or timing of repair parts or repair work, Excessive delivery times for purchases. Changes in standard specifications may also necessitate removal of specific products from the list. The product will be retained on the list if it is revised to meet the new criteria. November
2 1. WASTEWATER PRODUCTS CASING RUBBER END SEALS Cascade Waterworks... CCES CCI Pipeline Systems... ESW PSI... W (Section 3501.N.2.a) CASING SPACERS Cascade Waterworks... CCS (12 Width) CCI Pipeline Systems... CSS12 PSI... S12G2 (Section 3501.N.2.a) CONNECTION OF PIPES OF DISSIMILAR MATERIALS Fernco... Strong Back Repair Coupling Mission Rubber Company LLC... Flex-Seal Adjustable Repair Coupling Total Piping Solutions Inc.... Hymax (Section 3502.B.12) EPOXY MANHOLE LINER Citadel... SLS-30 Neopoxy... NPR-5300 Raven (Section 3501.O.10.a) JOINT SEALANT BETWEEN JOINTS Press-Seal... EZ-STIK (Section 3501.O.4.a) EXTERIOR OF JOINTS Press-Seal... EZ-Wrap Sealing Systems... Infi-Shield Gator Wrap (Section 3501.O.4.b.i) Canusa-CPS... WrapidSeal (Section 3501.O.4.b.ii) Sealing Systems Inc.... Infi-Shield Uni-Band (Section 3501.O.4.b.iii) November
3 MANHOLE CASTINGS STANDARD 24 MANHOLE FRAME AND COVER Frame: LS101A Cover: LS101B Clay & Bailey MR, 2007 EJ R.B. Agarwalla & Co Deeter (Section 3501.O.9, Standard Drawing SAN-2) BOLT-DOWN MANHOLE FRAME AND COVER Frame: LS102A Cover: LS102B Clay & Bailey OR Deeter (Section 3501.O.9, Standard Drawing SAN-2) SLAB MANHOLE FRAME AND COVER Frame: LS103A Cover: LS103B Clay & Bailey , 2007 Deeter (Section 3501.O.9, Standard Drawing SAN-3) SLAB BOLT-DOWN MANHOLE FRAME AND COVER Frame: LS104A Cover: LS104B Clay & Bailey... KCMO R4 (Section 3501.O.9, Standard Drawing SAN-3) PIPE TO MANHOLE CONNECTORS A-Lok... Premium (12 and greater) A-Lok... X-CEL (less than 12 ) (Sections 3501.O.1.d, 3501.O.6, Standard Drawings SAN-2, SAN-3, SAN-4, SAN-5) For new manholes Press Seal... PSX Direct Drive A-Lok... G3 (Section 3502.B.11.b, Standard Drawing SAN-5) For existing manholes and core drilled openings through outside drop manholes. November
4 POLYETHYLENE ENCASEMENT FILM LINEAR LOW DENSITY 8MIL AWWA C105 Sigma Corporation... 8 mil Linear LDPE AA Thread Seal Tape, Inc mil Linear LDPE (Section 3501.D.5) 2. WATER PRODUCTS CASING RUBBER END SEALS Cascade Waterworks... CCES CCI Pipeline Systems... ESW PSI... Model W (Section 3901.R.2) CASING SPACERS STAINLESS STEEL Cascade Waterworks... CCS CCI Pipeline Systems... CSS12 PSI... S12G2 (Section 3901.R.2) FIRE HYDRANTS American AVK... Series 2700 Clow... Medallion Kennedy... Guardian K-81D Mueller... Super Centurian Waterous... Pacer (WB ) (Section 3901.P) GRATE 18 X 18 Clay & Bailey BG EJ... V5718 Deeter (Standard Drawing WAT-12) MANHOLE COVERS TRAFFIC CONDITIONS Clay & Bailey , 2007 Deeter (Standard Drawing WAT-12) NON-TRAFFIC CONDITIONS Bilco... K-1 EJ... H (Standard Drawings WAT-12) November
5 FOR AIR RELEASE ASSEMBLY A. Y. McDonald... 74M36 Ford... MC-36 (Standard Drawing WAT-10) POLYETHYLENE ENCASEMENT FILM LINEAR LOW DENSITY 12 MIL AWWA C105 AA Thread Seal Tape, Inc mil Clear Linear LDPE Trumbull Manufacturing mil Clear Linear LDPE (Section 3901.C.7) STEPS M. A. Industries... PS-2-PF American Step Co... ML-13-NCR (3901.O.2.b, Standard Drawing WAT-12) TAPPING SLEEVES IRON BODY American Flow Control... Series 2800 Mueller... H-615 Tyler/Union... 25U U.S. Pipe... T-9 (Section 3901.M.1) STAINLESS STEEL Cascade... Series CST-EX Dresser... Style 630 Ford... Style FTSS JCM... Model 432 Romac... SST-III Smith-Blair (Section 3901.M.2) VALVES AIR RELEASE A.R.I.... S-050 (Section 3901.L.4, Standard Drawing WAT-10) BUTTERFLY Henry Pratt... Groundhog, Class 150B Mueller... Lineseal III (Section 3901.L.2) November
6 GATE American Flow Control... Series 2500 Clow... Resilient Wedge Gate Valve Kennedy... KS-FW M&H... Style 4067, NRS Mueller Series U.S. Pipe... A-USPO Resilient Wedge (Section 3901.L.3) Gate Valve VALVE BOXES CAST IRON COVERS Clay & Bailey Clay & Bailey (Section 3901.N.) CAST IRON VALVE BOXES Clay & Bailey... 5 ¼ (Screw Type) P1108 (Section 3901.N.) November
CITY OF LEE S SUMMIT PUBLIC WORKS DEPARTMENT
CITY OF LEE S SUMMIT PUBLIC WORKS DEPARTMENT APPROVED PRODUCTS LIST FOR WATER UTILITIES This document is provided as a benefit to contractors and suppliers who are performing work in the City of Lee s
APPROVED MATERIALS LIST
City of Loveland Department of Water and Power APPROVED MATERIALS LIST Notes: *Manufacturers are arranged alphabetically *City reviews this list yearly for modifications, additions, and removals. *To have
Effective Date: Revision #: 1. Section H: Repair Sleeves, Couplings, Clamps & Non-Pressure Adapters. Pipe Adapters, Non-Pressure
Section H: Repair Sleeves, Couplings, Clamps & Non-Pressure Adapters H 1 Pipe Adapters, Non-Pressure H 1.2 Pipe Adapters, Concrete Manhole Connection Boots: H 2 H 3 H 4 H 5 Repair Clamps/ Ductile Iron
KENNEBUNK, KENNEBUNKPORT & WELLS WATER DISTRICT MATERIAL SPECIFICATIONS 10/11/2018
KENNEBUNK, KENNEBUNKPORT & WELLS WATER DISTRICT MATERIAL SPECIFICATIONS 10/11/2018 The following material specifications section is intended to apply to ALL new construction, both public and private. For
EXHIBIT D SEACOAST UTILITY AUTHORITY 4200 HOOD ROAD PALM BEACH GARDENS, FL (PHONE: ) "SHOP" SPECIFICATIONS
EXHIBIT D SEACOAST UTILITY AUTHORITY 4200 HOOD ROAD PALM BEACH GARDENS, FL 33410 (PHONE: 561-627-2900) "SHOP" SPECIFICATIONS Project Name: Concurrence of Utility Contractor: Signature Date Firm Concurrence
CITY OF WARRENVILLE STANDARD SPECIFICATIONS WATER MAIN, SANITARY SEWER AND STORM SEWER
CITY OF WARRENVILLE STANDARD SPECIFICATIONS WATER MAIN, SANITARY SEWER AND STORM SEWER WATER MAIN 1. All open cut water main shall be polyvinyl chloride plastic (PVC) pressure pipe per AWWA specification
San Antonio Water System Material Standard Specifications
100-35 San Antonio Water System Material Standard Specifications REVISED DECEMER 2011 1. SCOPE These specifications cover-tapping sleeves installed on pipe from 4 and larger nominal pipe diameter. 2. GENERAL
Service Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe
F 1 F 1.1 F 1.2 F 2 F 2.1 F 3 Service Saddles/ Hinged Type for 2 PVC Service Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe Service Saddles/ Ductile Iron/ Stainless Steel Straps
MATERIAL/MANUFACTURER SPECIFICATIONS FOR DISTRIBUTION WATER MAINS AND APPURTENANCES
MATERIAL/MANUFACTURER SPECIFICATIONS FOR DISTRIBUTION WATER MAINS AND APPURTENANCES REVISION April 2008 1 MATERIAL SPECIFICATIONS T.S. 1 GENERAL Materials incorporated in the finished work and used during
All definitions are defined according to ANSI/AWWA C b. Flanged Joint: The flanged and bolted joint as described in ANSI/AWWA C110/A21.10.
21-02 SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE ANSI/AWWA C509-01 3 IN., 4 IN., 6 IN., 8 IN., 10 IN., 12 IN., 16 IN., & 20 IN. Revised
OLYMPIC VIEW WATER AND SEWER DISTRICT APPROVED MATERIALS LIST FOR USE ON NEW CONSTRUCTION OF WATER AND SEWER FACILITIES
OLYMPIC VIEW WATER AND SEWER DISTRICT APPROVED MATERIALS LIST FOR USE ON NEW CONSTRUCTION OF WATER AND SEWER FACILITIES This form is intended for use by developers or contractors constructing potable water
II: APPROVED MATERIALS FOR WATER AND WASTEWATER
II: APPROVED MATERIALS FOR WATER AND WASTEWATER SECTION II (Sub-Section 100) Checklist for Citrus County Approved Materials (Written Checklist) Article Page Approved Materials for Construction of Water
OLYMPIC VIEW WATER AND SEWER DISTRICT APPROVED MATERIALS LIST FOR USE ON NEW CONSTRUCTION OF WATER AND SEWER FACILITIES
OLYMPIC VIEW WATER AND SEWER DISTRICT APPROVED MATERIALS LIST FOR USE ON NEW CONSTRUCTION OF WATER AND SEWER FACILITIES This form is intended for use by developers or contractors constructing potable water
SECTION 2100 WATER MAIN
SECTION 2100 WATER MAIN WATER MAIN PART 1 GENERAL 1.01 Section Summary A. This section includes product and installation requirements for water main pipe, gate valves, hydrants, fittings, and miscellaneous
Combination Air Valves - Stainless Steel/ Sanitary Sewer/ For 2 Thru 12 Mains
D 1 D 1.1 D 1.2 D 1.3 D 1.4 D 1.5 D 2 D 3 D 3.1 D 3.2 D 4 D 4.1 D 5 D 6 D 7 D 8 Valves- Resilient Seat/ 2 (FIPT X FIPT) Valves - AWWA C509/ Resilient Seat/ 2 Thru 12 (MJ X MJ) Tap Valves - AWWA C509/ Resilient
SUPPLEMENTAL SPECIFICATIONS TO STANDARD SPECIFICATIONS FOR WATER MAIN AND SERVICE LINE INSTALLATION NO. 2611
Revised October 10, 2014 SUPPLEMENTAL SPECIFICATIONS TO STANDARD SPECIFICATIONS FOR WATER MAIN AND SERVICE LINE INSTALLATION NO. 2611 Water Main and Service Line Installation shall be in accordance with
Clay County Utility Authority Approved Materials " "
Clay County Utility Authority " "" Clay County Utility Authority "". "". " Clay County Utility Authority DESCRIPTION: Extruded sheets or panels with integral male/female sliding lock connection ends.
CITY OF HUTCHINSON REQUEST FOR BID FORM Page 1 of 3
CITY OF HUTCHINSON REQUEST FOR BID FORM Page 1 of 3 Please quote your delivered prices to the City of Hutchinson on items or services listed below. Consult attached minimum and general specifications for
APPENDIX TABLE OF CONTENTS LIST OF AUTHORIZED MATERIALS FOR POTABLE WATER PROJECTS
APPENDIX TABLE OF CONTENTS APPENDIX A TITLE LIST OF AUTHORIZED MATERIALS FOR POTABLE WATER PROJECTS A LIST OF AUTHORIZED MATERIALS FOR POTABLE WATER PROJECTS All brass products up to and including 2-inch,
KENT COUNTY WATER AUTHORITY. ERRATUM to Rules and Regulations of the Kent County Water Authority
KENT COUNTY WATER AUTHORITY ERRATUM to Rules and Regulations of the Kent County Water Authority Section 4.9.1.1 Resilient Seat Gate 4 inch to 12 inch: Replace with the attached. Section 4.9.1.3 Tapping
APPROVED MATERIALS LIST
APPROVED MATERIALS LIST Remove this Section and Replace with the following The following list of approved materials for use in the MDWID system has been established from available information and historical
SECTION III: Water Main Materials Specifications
SECTION III: Water Main Materials Specifications Table of Contents Bolts and Nuts... 31 Cast Iron or Ductile Iron Split Repair Sleeve 32 Corporation Stops. 33 Curb Stops. 34 Cut in Sleeves 35 Ductile Iron
1. Will have water lines designed by a North Carolina Registered Professional Engineer.
03/07/16 DEVELOPER/OWNER RESPONSIBILITES 1. Will have water lines designed by a North Carolina Registered Professional Engineer. 2. Will have the water line installed by a North Carolina Licensed Utility
Effective Date: Revision #: 1. Section K: Miscellaneous. Casing Insulators/ Stainless Steel. Polyethylene Encasement.
K 1 K 2 K 3 K 4 K 5 K 6 K 7 K 8 K 9 Casing Insulators/ Stainless Steel Polyethylene Encasement Manhole Inserts Pipe Saddle Support/ Valve Vaults/ Adjustable Cylindrical Wall Seals & Line Sleeves Metal
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
YAKIMA COUNTY, WASHINGTON. Special Provisions For Water Main Construction
YAKIMA COUNTY, WASHINGTON Special Provisions For Water Main Construction The 2014 Standard Specifications for Road, Bridge, and Municipal Construction as prepared by the Washington State Department of
CCUA APPROVED MATERIALS LIST Revised August 24, 2015
CCUA APPROVED MATERIALS LIST Revised August 24, 2015 WATER SEWER REMOVE TOC-Water (Rev. 04/27/15) W-4 (Rev. 04/03/09) W-7 (Rev. 05/04/15) W-21 (Rev. 04/04/06) REMOVE S-13 (Rev 04/03/09) S-37 (Rev. 05/04/15)
Stanford University Facilities Design Guidelines SECTION UNDERGROUND CHILLED WATER SYSTEM. D. Section : Domestic & Lake Water Systems
SECTION 33 61 01 UNDERGROUND CHILLED WATER SYSTEM PART 1 GENERAL 1.1 RELATED WORK A. Section 31 10 00: Site Preparation B. Section 31 00 00: Earthwork C. Section 31 23 00: Excavation and Fill D. Section
DUCTILE IRON PIPE AND FITTINGS
Section 02501 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Ductile iron pipe and fittings for water lines, wastewater force mains, gravity sanitary sewers, and storm sewers. 1.02 MEASUREMENT AND PAYMENT
Everett Water Department Specifications. & Requirements
Everett Water Department Specifications & Requirements Hydrants Page 2 Gate Valves Page 2 Tapping Sleeves & Valves Page 3 Insertion Valves Page 3 Line Stops Page 4 Valve Boxes & Covers Page 4 Service piping
REGIONAL CONSTRUCTION STANDARDS
REGIONAL CONSTRUCTION STANDARDS SIXTH EDITION Publication Update 6.1 (Full Committee Approved Proposed Revision 6.1 Ductile Iron Pipe Protections - Section 200 As Publication Update 6.1) March 27, 2018
CITY OF MIDDLETOWN ADDENDUM #1 TO BID # BID # LABORATORY TESTING SERVICES. Date Issued: September 1, 2016
CITY OF MIDDLETOWN ADDENDUM #1 TO BID #2016-021 BID #2016-021 LABORATORY TESTING SERVICES Date Issued: September 1, 2016 ALL BIDDERS ARE HEREBY ADVISED OF THE FOLLOWING INFORMATION AND/OR MODIFICATIONS
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO. Alan Andreani, Ed. D. Mayor of Alliance
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO 2016 Alan Andreani, Ed. D. Mayor of Alliance Mike Dreger, Director Public Safety & Service GENERAL TERMS AND CONDITIONS 1. Special
Copper-Type K soft Drawn 40, 50 HDPE 100 and larger
1.0 GENERAL 1.1 Scope 1.1.1 The work covered by this section involves the installation of water and sewer service connections and all other associated work. 1.2 Authorization 1.2.1 Do not install service
SECTION 401 WATER PIPE AND FITTINGS 2.2 POLYVINYL CHLORIDE (PVC) PIPE AND FITTINGS
SECTION 401 PIPE AND FITTINGS PART 2 MATERIALS 2.2 POLYVINYL CHLORIDE (PVC) PIPE AND FITTINGS A. PVC Pressure Pipe sizes 4 inch through 12 inch: ANSI/AWWA C 900 1. DR18 B. PVC Pressure Pipe sizes 14 inch
PURCHASING STANDARDS FOR WATERWORKS MATERIAL CONNECTICUT WATER COMPANY (CWC) & MAINE WATER COMPANY (MWC)
PURCHASING STANDARDS FOR WATERWORKS MATERIAL CONNECTICUT WATER COMPANY (CWC) & MAINE WATER COMPANY (MWC) OCTOBER 2016 FORWARD The purpose of Purchasing Standards for Waterworks Materials is to identify
2. A preconstruction meeting with the TWA s staff is required prior to initiating construction.
General: 1. Construct utilities in accordance to TWA approved plans and shop drawings. Any deviation from the approved plans shall be approved by the DEVELOPER S ENGINEER and TWA 2. A preconstruction meeting
ARTICLE 26 UTILITY LINE INSTALLATION REQUIREMENTS
UTILITY LINE INSTALLATION REQUIREMENTS Index 26.01 JACK AND BORE OPERATIONS 26.02 PRESSURE PIPE RESTRAINT 26.03 PRESSURE CONNECTION BACK TO TABLE OF CONTENTS Section 26.01 JACK AND BORE OPERATIONS 26.01.01
PURCHASING STANDARDS FOR WATERWORKS MATERIAL
CONNECTICUT WATER SERVICE PURCHASING STANDARDS FOR WATERWORKS MATERIAL FOR ALL SUBSIDIARY COMPANIES August 2017 FORWARD The purpose of Purchasing Standards for Waterworks Materials is to identify a set
SECTION PIPING SPECIALTIES AND ACCESSORIES
SECTION 15120 PIPING SPECIALTIES AND ACCESSORIES PART 1 - GENERAL 1.01 DESCRIPTION A. Work Specified 1. CONTRACTOR shall provide all labor, materials, equipment, tools, services, and incidentals necessary
SAINT PETERSBURG CITY COUNCIL. Consent Agenda. Meeting of April 3, The Honorable James Bennett, Chair and Members of City Council
SAINT PETERSBURG CITY COUNCIL Consent Agenda Meeting of April 3, 2008 To : The Honorable James Bennett, Chair and Members of City Council Subject : Renewing a strategic partnership agreement with HD Supply
City of Middletown WATER & SEWER DEPARTMENT 82 Berlin Street Middletown, CT TEL: (860) FAX: (860)
City of Middletown WATER & SEWER DEPARTMENT 82 Berlin Street Middletown, CT 06457 TEL: (860) 638-3500 FAX: (860) 343-8091 GENERAL REQUIREMENTS WATER MAIN AND SERVICE INSTALLATION JANUARY 2017 WATER MAINS:
All definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
CHAPTER 4 - CULINARY WATER
CHAPTER 4 - CULINARY WATER 4.1 GENERAL This Division covers furnishing and installing pressure pipe to the lines and grades shown on the drawings and/or established in the field, and all flushing, testing,
FOX METRO WATER RECLAMATION DISTRICT MANHOLE / SEWER PIPE MATERIALS AND INSTALLATION SPECIFICATIONS MATERIALS 1. PIPE & FITTINGS
FOX METRO WATER RECLAMATION DISTRICT MANHOLE / SEWER PIPE MATERIALS AND INSTALLATION SPECIFICATIONS MATERIALS 1. PIPE & FITTINGS Rev: 3/26/18 Pipe and fittings used in sanitary sewer construction shall
2017 Material and Construction Specifications
2017 Material and Construction Specifications Water and Sewer Pre Construction Materials Standard Details Inspections & Testing Todd Marti, Director of Engineering South West, West Valley City, UT T: E:
PRODUCT SPECIFICATION SHEETS
Public Works Department Water & Wastewater Services WATER & WASTEWATER ENGINEERING DIVISION 33369 954-831-0745 /0925 PRODUCT SPECIFICATION SHEETS June 20, 2012 May 14, 2012 This document approved by the
SECTION FIRE HYDRANTS
SECTION 21 11 10 PART 1. GENERAL 1.1 SUMMARY: A. Work consists of furnishing and installing new fire hydrants, (boot with ductile iron retainer gland, standpipe and hydrant complete) plus constructing
Water & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
SECTION WASTEWATER FORCE MAINS
SECTION 02732 WASTEWATER FORCE MAINS PART - GENERAL 1.01 GENERAL: A. This section includes the general requirements for design and installation of force main systems serving wastewater lift stations. B.
SECTION FACILITY STORM DRAINAGE PIPING
SECTION 221413 FACILITY STORM DRAINAGE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SECTION FIRE HYDRANTS
SECTION 02080 FIRE HYDRANTS PART 1 - GENERAL 1.01 DESCRIPTION A. Work Specified The work specified shall include all labor, material, equipment, tools, services and incidentals necessary to furnish and
CITY OF FARGO SPECIFICATIONS SEWER AND WATER SERVICE CONNECTIONS
SEWER AND WATER SERVICE CONNECTIONS PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of the furnishing of all labor, material,
DIVISION 33 UTILITIES SECTION MANHOLES AND PRECAST STRUCTURES
DIVISION 33 UTILITIES PART 1 GENERAL 1.01 INTRODUCTION A. Manholes shall be constructed at the points showed on the approved final plans or at such points as may be specified by the Engineer. Manholes
SECTION 027 SPECIFICATIONS - PIPE MATERIALS FOR SEWERS
SECTION 027 SPECIFICATIONS - PIPE MATERIALS FOR SEWERS Pipe material used to construct, repair or modify sewers shall conform to the specifications within this Section. 1.0 Clay Pipe Construction of clay
List of Acceptable Product Specifications CPDMS0018
List of Acceptable Product Specifications CPDMS0018 17 July 2018 Contents Foreword 3 Pipe and Fittings 4 Polyvinylchloride (PVC) 4 Ductile Iron (DI) 4 Mild Steel (MS) 5 Polyethylene (PE) 5 Polypropylene
A. This Section includes gravity-flow, nonpressure storm drainage outside the building, with the following components:
SECTION 334100 - STORM UTILITY DRAINAGE PIPING PART 1 - GENERAL 1.I RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Northshore Utility District King County, Washington 2018 ENGINEERING SPECIFICATIONS MATERIALS OF CONSTRUCTION
Northshore Utility District King County, Washington 2018 ENGINEERING SPECIFICATIONS MATERIALS OF CONSTRUCTION February, 2018 TABLE OF CONTENTS SECTION 9 ENGINEERING SPECIFICATIONS Materials of Construction
DIVISION 2. Standards for Water Installation
DIVISION 2 Standards for Water Installation Division 2 Water Installation Page 1 of 13 Effective Date 7/6/2010 Division 2 Standards for Water Installation Table of Contents 2-1.000 WATER...4 2-1.010 General...4
SECTION 200 SANITARY SEWER MATERIAL SPECIFICATIONS
SECTION 200 SANITARY SEWER MATERIAL SPECIFICATIONS 200-1 MATERIAL SPECIFICATION LIST Rev. May 2011 SEWER UTILITY General: 1. All manufacturers products listed are preferred. Others may be submitted to
SECTION WASTEWATER FORCE MAINS
SECTION 02732 WASTEWATER FORCE MAINS PART 1 GENERAL 1.01 GENERAL: A. This section includes the general requirements for design and installation of force main systems serving wastewater lift stations. B.
CITY OF PLACERVILLE, CALIFORNIA DEVELOPMENT SERVICES DEPARTMENT ENGINEERING DIVISION
CITY OF PLACERVILLE, CALIFORNIA DEVELOPMENT SERVICES DEPARTMENT ENGINEERING DIVISION ADDENDUM #4 DATE: 02/08/2016 PROJECT: CONTRACT No: 40604 BID DATE, TIME: 02/11/2016, 2:00PM NOTICE TO ALL CONTRACTORS
2018 Material and Construction Specifications
Improving quality of life today creating a better tomorrow 2018 Material and Construction Specifications Water and Wastewater Systems Pre Construction Materials Standard Details Inspections & Testing Granger
SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL
SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL This section covers the furnishing and installation of ductile iron water pipe, fittings, thrust restraint and pipe disinfection. Ductile Iron Pipe MATERIALS
Davis and Weber Counties Canal Company
PRESSURIZED SECONDARY WATER CONSTRUCTION SPECIFICATIONS For Davis and Weber Counties Canal Company January 2016 1 SECTION 1: GENERAL QUALITY CONTROL REQUIREMENTS 1.1 SCOPE: This section defines the general
Facility Sanitary Sewers
University of New Hampshire University of New Hampshire Scholars' Repository Division 22 Plumbing Chapter 5 Technical Construction and Renovation Standards 4-23-2015 221313 - Facility Sanitary Sewers Sandra
CHAPTER 3 - PRESSURE IRRIGATION
CHAPTER 3 - PRESSURE IRRIGATION 3.1 GENERAL This division covers furnishing and installing pressure pipe as shown on the Drawings or established in the field, and all flushing, testing, repairing, as required
INVITATION TO BID. August 3, Dear Vendor,
INVITATION TO BID August 3, 2016 Dear Vendor, Enclosed you will find a bid package for a Route 13 Water Main Project Materials for the City of Seaford. All pertinent information is contained within. The
SUPPLEMENTAL SPECIFICATIONS AND DRAWINGS TO THE IDAHO STANDARDS FOR PUBLIC WORKS CONSTRUCTION TABLE OF CONTENTS
PREFACE AND CITY ENGINEER S LETTER INDEX OF STANDARD DRAWINGS DIVISION 100 GENERAL CONDITIONS ARTICLE 1 DEFINITIONS AND TERMINOLOGY 1.01 Defined Terms ARTICLE 2 PRELIMINARY MATTERS 2.01 Delivery of Bonds
Wastewater Capital Projects Management Standard Construction Specification
CITY AND COUNTY OF DENVER ENGINEERING DIVISION Wastewater Capital Projects Management Standard Construction Specification 10.1 PRECAST CONCRETE PIPE 10.1.1 General This section covers material requirements,
Request for Bids Water Department. City of Portsmouth, New Hampshire Water Inventory Bid #33-08
Request for Bids Water Department City of Portsmouth, New Hampshire Water Inventory Bid #33-08 1 Bid #33-08 Portsmouth, New Hampshire Public Works Department Water Inventory INVITATION TO BID Sealed bid
8560 Arlington Boulevard Fairfax, Virginia APPROVED PRODUCTS LIST
8560 Arlington Boulevard Fairfax, Virginia 22031 APPROVED PRODUCTS LIST JANUARY 2018 This page left intentionally blank. DIVISION 2 SITEWORK...1 02300 Earthwork...1 02371 Geotextiles...1 02400 Tunneling,
University of Central Florida Main Campus. Domestic Water. Service and Meter Installations Requirements. Issued January 26 th, 2017.
University of Central Florida Main Campus Domestic Water Service and Meter Installations Requirements Issued January 26 th, 2017 1 P a g e Table of Contents 1. GENERAL INFORMATION... 3 2. DEFINITIONS...
City of Port Moody. Water Meter Specifications
City of Port Moody Water Meter Specifications Engineering Division, Updated December 2015 City of Port Moody Water Meter Specifications 1. Preamble... 3 2. Definitions... 3 3. Services to be Metered...
SERVICE LINES, METERS AND APPURTENANCES
AUGUST02 SECTION 02646 SERVICE LINES, METERS AND APPURTENANCES PART 1 - GENERAL 1.1 DESCRIPTION A. This section concerns materials and installation of corporation stops, curb stops, service lines, meters,
CALAVERAS COUNTY WATER DISTRICT Ebbetts Pass Water System Reach 3A Pipeline Replacement Project CCWD CIP No ADDENDUM 2
CALAVERAS COUNTY WATER DISTRICT Ebbetts Pass Water System Reach 3A Pipeline Replacement Project CCWD CIP No. 11078 ADDENDUM 2 Date Issued: December 2, 2015 **** Receipt of addenda must be acknowledged
05-455B WATER PIPE, VALVES, AND FITTINGS SECTION
SECTION 2665-1 1.0 GENERAL 1.1 SCOPE: A. This work consists of the installation of water pipe and fittings of the sizes and classes indicated. B. This work is also covered by the 1996 Coos Bay North Bend
DESIGN GUIDELINES AND TECHNICAL STANDARDS
DESIGN GUIDELINES AND TECHNICAL STANDARDS Date of Issuance: January 1, 2014 DIVISION 33 UTILITIES SECTION 33 1313 - FACILITY SANITARY SEWERS 1. General: This section includes performance requirements
CITY of DALLAS. Standard Drawings. & Oregon Standard Drawing Amendments. Water Drawings
CITY of DALLAS Standard Drawings & Oregon Standard Drawing Amendments Water Drawings RD250 - Thrust Blocking RD254 - Hydrant Installation RD258 - Valve Box and Operator Extension Assembly RD262 - Standard
WATER SYSTEM STANDARD SPECIFICATIONS
WATER SYSTEM STANDARD SPECIFICATIONS Detail Number 1. Typical trench cross section with two parallel water lines 2. Installation of valves and hydrants in ditches 3. Fire hydrant assembly 4. Guard and
Section FLUSHING HYDRANTS
STANDARD SPECIFICATION Section 02520 PART 1 GENERAL 1.01 SUMMARY This Section includes: A. Flushing hydrants. B. Adjustment of flushing hydrants and gate valves. 1.02 MEASUREMENT AND PAYMENT A. Unit Prices.
REVISED 9/28/2015 MUD 119 METROPOLITAN UTILITIES DISTRICT OF OMAHA OMAHA, NEBRASKA SPECIFICATION FOR MATERIALS
METROPOLITAN UTILITIES DISTRICT OF OMAHA OMAHA, NEBRASKA SPECIFICATION FOR MATERIALS * 1. DISTRICT FURNISHED MATERIALS A. Materials to be Furnished The District will furnish all line valves, hydrant branch
NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section PRECAST CONCRETE MANHOLES
PART 1 GENERAL 1.01 SUMMARY This Section includes: Section 02082 A. Precast concrete manholes for sanitary sewers, storm sewers and water lines. B. Precast concrete sanitary sewer manholes with PVC liner
CITY OF WHITTIER WATER UTILITY STANDARD SPECIFICATIONS
CITY OF WHITTIER WATER UTILITY STANDARD SPECIFICATIONS CITY OF WHITTIER WHITTIER UTILITY AUTHORITY APPROVED: FEBRUARY 7, 2017 REVISED: FEBRUARY 15, 2018 13230 PENN STREET WHITTIER, CA 90602 (562) 567-9500
SECTION of GENERAL. A. Description
SECTION 15210-1 of 10 15210.01 GENERAL A. Description This section includes requirements for interior piping and fittings, buried and interior valves and specialty items used in conjunction with piping
REVISED 01/11/2017 MUD 119 METROPOLITAN UTILITIES DISTRICT OF OMAHA OMAHA, NEBRASKA SPECIFICATION FOR MATERIALS
METROPOLITAN UTILITIES DISTRICT OF OMAHA OMAHA, NEBRASKA SPECIFICATION FOR MATERIALS 1. DISTRICT FURNISHED MATERIALS A. Materials to be Furnished The District will furnish all line valves, hydrant branch
PRECAST CONCRETE MANHOLES. A. Precast concrete manholes for sanitary sewers, storm sewers, and water lines.
Section 02082 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Precast concrete manholes for sanitary sewers, storm sewers, and water lines. B. Precast concrete sanitary sewer manholes with PVC liner where
HAIGHTS CREEK IRRIGATION COMPANY
HAIGHTS CREEK IRRIGATION COMPANY DEVELOPMENT STANDARDS AND SPECIFICATIONS Adopted by the Haights Creek Irrigation Company Board June 11, 2015 (rev. 4/12/17) Haight s Creek Irrigation Company Adopted June
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION DUCTILE IRON PIPE, FITTINGS AND SPECIAL ITEMS
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 11 13.13 DUCTILE IRON PIPE, FITTINGS AND SPECIAL ITEMS PART 1 GENERAL... 3 1.1 Description... 3 1.2 Reference Specifications,
Exhibit A FOX CHAPEL AUTHORITY STANDARD SPECIFICATIONS FOR MATERIALS AND INSTALLATION OF WATER MAINS
Exhibit A FOX CHAPEL AUTHORITY STANDARD SPECIFICATIONS FOR MATERIALS AND INSTALLATION OF WATER MAINS Requests for extensions to Authority water mains shall be made in writing by the owner or owners of
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION Request for Offer (RFO) SUPPLY AND DELIVERY OF DUCTILE IRON CEMENT LINED PRESSURE PIPES AND FITTINGS FOR HURSLEY ROAD AND TOOWOOMBA CECIL PLAINS ROAD (GREENWATTLE
NORTH HARRIS COUNTY REGIONAL WATER AUTHORITY. Section DUCTILE IRON PIPE AND FITTINGS
Section 02501 PART 1 GENERAL 1.01 SUMMARY This Section includes ductile iron pipe and fittings for water lines, wastewater force mains, gravity sanitary sewers, and storm sewers. 1.02 MEASUREMENT AND PAYMENT
PRODUCT SPECIFICATIONS FOR PRODUCTS AND MATERIALS. Numerical Listing
S FOR PRODUCTS AND MATERIALS Numerical Listing WSA PS 200 WSA PS 201 WSA PS 202 WSA PS 202S Ductile Iron Pipes (CIOD) for Pressure Applications - Water Supply and Sewerage Ductile Iron Fittings (CIOD)
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
SECTION 11 - WATER DISTRIBUTION SYSTEM
SECTION 11 - WATER DISTRIBUTION SYSTEM 11.1.0 GENERAL Work in this Section includes all water system piping including all valves, hydrants, fittings, anchors, air vents, and other allied equipment or material
A. Gravity-Flow, Nonpressure, Drainage-Piping Pressure Rating: 10-foot head of water.
SECTION 22 1313 - FACILITY SANITARY SEWERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
CHAPTER 3 - PRESSURE IRRIGATION
CHAPTER 3 - PRESSURE IRRIGATION 3.1 GENERAL This division covers furnishing and installing pressure pipe as shown on the Drawings or established in the field, and all flushing, testing, repairing, as required
ELEVATION (A - A) PLAN GATE W ELL JOB NO. SHEET NO. DATE MARCH 2015 OF. Gate Wel Dimensions - Inches
CL Gate Wel Opening East Jordan Iron Works, Inc. Manhole Cover No. 1040 (or approved equal) w/ bolted frame 01-APR-2015 15:29 = I:\MSV8i\Plotting\piblack.ptb V:\201001\\C\8x11_Howell_Det\wm_det01_8x11_wm01.dgn
1. Required Minimum Flow:
SECTION 6 6. 6.01 General The City of Castle Rock Water System Minimum Standards and Specifications are minimum base level performance, design, and construction standards used to maintain uniformity of
STANDARD SPECIFICATIONS SECTION BORING AND JACKING. A. Section includes requirements for boring and jacking casing pipe.
STANDARD SPECIFICATIONS SECTION 02445 BORING AND JACKING PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for boring and jacking casing pipe. 1.2 DEFINITIONS A. Carrier Pipe: Sewer or water