Tehnical Data Sheet Astro Intu Mastic. UIC of product-type: INTUM CPR-JA5015

Transcription

1 1121 Astroflame Fireseals Ltd Unit 8 The I O Centre CPR-JA5015 ETA-14/0049 ETA-14/0050 ETAG 026-Part 1 ETAG 026-Part 2 ETAG 026-Part 3 MASTIC see ETA-14/0049 & ETA- 14/0050 for relevant characteristics FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS AND/OR JOINT SYSTEMS AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY <R27645> CAN/UL LEED 2009-EQ UL 2079 ASTM D ASTM-E 1966 APPROVED CF640 EN EN1366-3:2009 EN1026:2000 EN1366-4:2009 EN :2010 BS476 part 20&22 ISO ISO 8339:2005 ISO :2011 ISO 9046:2005 Tehnical Data Sheet Astro Intu Mastic Issue: 1 Feb 2014 UIC of product-type: INTUM

2 Page 1 of 32 Astro Intu Mastic is an acrylic based sealant used to reinstate the fire resistance performance of wall and floor constructions where they have been provided with apertures for the penetrations of multiple services and to form linear gap seals where gaps are present in wall and floor constructions and linear joints where wall and floor constructions abut. Astro Intu Mastic has slight intumescent properties that cause it to swell on heating. The Astro Intu Mastic is supplied in liquid form contained within 310ml & 380ml cartridges, 600ml foils or in 5, 10, 20 or 25 kg tubs. The sealant is gunned or trowelled into the aperture in or between the separating elements/elements to a specific depth utilising various backing materials. A polyethylene backing rod can be utilised as a depth gauge. Reaction to Fire classification F ETA ETA CE-1121-CPR-JA5015 The Intended use of system Astro Intu Mastic is to reinstate the fire resistance performance of gaps in and joints between rigid and flexible wall constructions, gaps in and joints between rigid floor constructions. The specific elements of construction that the system Astro Intu Mastic may be used to provide a gap or joints seal in, are as follow: Rigid Floors: The floor must have a minimum thickness of 150mm and comprise concrete, aerated concrete or masonry, with a minimum density of 650kg/m 3. Rigid walls: The wall must have a minimum thickness of 100mm and comprise concrete, aerated or masonry, with a minimum density of 650kg/m 3 Flexible walls: The wall must have a minimum thickness of 120mm and comprise timber or steel studs lined on both faces with minimum 2 layers of 12.5mm thick, Type F Gypsum boards according to EN 520. In timber stud walls, no part of the penetration shall be closer than 100mm to a stud, the cavity must be insulation of class A1 or A2 according to EN , is provided within the cavity between the penetration seal and the stud. Astro Intu Mastic is required to seal all joints and junctions during the sealing process of Astro Batt. Astro Coated Batt are 50mm thick and supplied in overall dimensions 1200mm x 600mm with a density 140kg/m 3 and is subject to a separate ETA referenced 14-????. The Supporting construction must be classified in accordance with EN for the required fire resistance period. The system Astro Intu Mastic may be used to provide a linear joint or gap seal with specific supporting constructions and substrates and as a penetration seal. The maximum permitted joint/gap width for system Astro Intu Mastic is 50mm. The maximum movement capability of system Astro Intu Mastic is 7.5% Astro Intu Mastic has been tested in accordance with EOTA Technical Report - TR024 - Edition November 2006, for the type Z 1, use category specific in ETAG (used as European Assessment Document, EAD). The results of the tests have demonstrated suitability for Penetration Seals and Linear Gap Joints. Type Z 1 : Intended for use In internal conditions with humidity equal to or higher than 85% RH excluding temperatures below 0 o C, without exposure to rain or UV.

3 Page 2 of 32 Air Permeability System Astro Intu Mastic has been tested in accordance with BS EN to provide the following results: Airbourne Sound Insulation ETA ETA CE-1121-CPR-JA5015 Product tested Astro Intu Mastic intumescent sealant Results under positive chamber pressure Results under negative chamber pressure Pressure (Pa) Leakage Leakage (m 3 / (m 3 /h) M 2 /h) Leakage (m 3 /h) Leakage (m 3 /m 2 /h) Acoustic Rating BS EN ISO :1995 R w (C;C tr ) :38(-2;-7) db Dangerous Substances Deceleration Astroflame Fireseals Limited has presented a declaration that Astro Intu Mastic does not contain any substance of high concern with regards to REACH Regulations and are compliant with the requirements reference to construction/cpd-ds/index.cfm Confirmation has further been declared that all dangerous chemical substances 1.0 % w/w as well as all toxic, carcinogenic, toxic for reproduction and mutagenic chemical substances 0.1 % w/w (Status: 29. adaption 2004/73/EG of the EU directive 67/548/EEC - classification, packaging and labelling of dangerous substances) are stated in the Astro Intu Mastic safety data sheets (according to91/155/eec including amendments) and have been considered for the classification of the products according to the directive 1999/45/EG (classification of preparations, including amendments). All dangerous chemical substances are below the classification limits of 67/548/EEC. In addition to the specific clauses relating to dangerous substances contained in this European technical approval, there may be other requirements applicable to the products falling within its scope (e.g. transposed European legislation and national laws, regulations and administrative provisions). In order to meet the provisions of the Construction Products Regulation, these requirements need also to be complied with, when and where they apply. The provisions made in the European Technical Assessment are based on an assumed working life of the Astro Intu Mastic of 10 years, provided that the conditions laid down in sections 4.2/5.1/5.2 for the packaging/transport/storage/installation/use/ repair are met. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works.

4 Page 3 of 32 ETA ETA CE-1121-CPR-JA5015 Astro Intu Mastic Linear Joint Seals. Min 150mm thick Rigid Floor, Horizontally orientated to one side of the floor Substrate Depth (mm) Backing material Classification Concrete-Concrete 10(Single side) PE backing rod E240 EI45-H-X-F-W 00 to 20 Concrete-Concrete 25(Single Side) PE backing rod E240 EI90-H-X-F-W 00 to 50 Concrete-Steel 10(Single Side) PE backing rod E120 EI20-H-X-F-W 00 to 20 Concrete-Steel 50(Single Side) PE backing rod E240 EI90-H-X-F-W 00 to 50 Concrete-Softwood 10(Single Side) PE backing rod EI30-H-X-F-W 00 to 20 Concrete-Softwood 50(Single Side) PE backing rod EI45-H-X-F-W 00 to 50

5 Page 4 of 32 ETA ETA CE-1121-CPR-JA5015 Astro Intu Mastic Linear Joint Seals. Min 100mm Thick Rigid Floor, Vertically orientated Sealant to one side of the wall Substrate Depth (mm) Backing material Classification Concrete-Concrete 10(Single side) PE backing rod E120 EI45-V-X-F-W 00 to 20 Concrete-Concrete 25(Single Side) PE backing rod E120 EI60-V-X-F-W 00 to 50 Concrete-Steel 10(Single Side) PE backing rod E120 EI20-V-X-F-W 00 to 20 Concrete-Steel 50(Single Side) PE backing rod E45 EI30-V-X-F-W 00 to 50 Concrete-Softwood 10(Single Side) PE backing rod E30 EI20-V-X-F-W 00 to 20 Concrete-Softwood 50(Single Side) PE backing rod EI45-V-X-F-W 00 to 50

6 Page 5 of 32 ETA ETA CE-1121-CPR-JA5015

7 Page 6 of 32 ETA ETA CE-1121-CPR-JA5015

8 Page 7 of 32 ETA ETA CE-1121-CPR-JA5015 Astro Intu Mastic Linear Joint Seals. Min 120mm thick - Sealing of Drywall Head Track - Sealant Flush To Both Faces of The Wall. Horizontally Orientated Sealant To Both Sides of The Wall Substrate Depth (mm) Classification Gypsum board/steel head track 25mm (both side) EI120-T-X-F-W 00 to 20 Gypsum board/steel head track 25mm (both Side) EI120-V-X-F-W 00 to 50

9 Page 8 of 32 ETA ETA CE-1121-CPR-JA5015 Astro Intu Mastic Linear Joint Seals. Min 120mm Thick Flexible or Rigid Wall. Sealant Flush to Both Faces of The Wall Depth (mm) Backing material Classification 12.5(Both side) PE backing rod EI120-V-X-F-W 00 to 20

10 Page 9 of 32 ETA ETA CE-1121-CPR-JA5015 Astro Intu Mastic Linear Joint Seals. Min 150mm thick Rigid Floor, Horizontally orientated to one side of the floor. Sealant to both sides of the wall Penetration Specification Astro Intu Mastic (installed Both Faces) Backing material Classification Cables up to 21mm Perforated Cable Tray 450mm x 50mm Cables up to 21-50mm 490mm long x 100mm high x 25mm deep 200mm long x 100mm high x 25mm deep 70mm thick, 80kg/m 3 N/A E120 EI90 E90 EI60

11 Page 10 of 32 ETA ETA CE-1121-CPR-JA5015

12 Page 11 of 32 ETA ETA CE-1121-CPR-JA5015

13 Page 12 of 32 ETA ETA CE-1121-CPR-JA5015

14 Page 13 of 32 ETA ETA CE-1121-CPR-JA5015 Astro Intu Mastic Linear Joint Seals. Min 120mm Thick Flexible or Rigid Wall. Sealant to Both Sides of The Wall. Penetrations Specification Depth (mm) Backing material Classification E120 C/U EI20 C/U Copper/Steel Pipe 15mm Ø, 0.8mm wall thickness 10mm annulus x 25mm deep N/A Copper/Steel Pipe 40mm Ø, 0.8mm mm wall thickness 10mm annulus x 25mm deep N/A Copper/Steel Pipe mm Ø, 1.8mm mm wall thickness 10mm annulus x 25mm deep N/A E120 C/U Copper/Steel Pipe 40mm Ø, 0.8mm mm wall thickness* 10mm annulus x 25mm deep N/A Copper/Steel PIpe mm Ø, 1.8mm mm wall thickness* 10mm annulus x 25mm deep N/A * Astro Thermal defense wrap to the unexposed face long 300m long E120 C/U EI15 C/U E120 C/U EI90 C/U E120 C/U EI20 C/U

15 Page 14 of 32 ETA ETA CE-1121-CPR-JA5015

16 Page 15 of 32 ETA ETA CE-1121-CPR-JA5015

17 Page 16 of 32 XHHW & XHHW7.R27645 UL Certification Fill or Cavity Materials Certified for US & Canada XHHW & XHHW7.R27645 UL Certification Fill or Cavity Materials Certified for US & Canada Astro Intu Mastic covers the fire exposure and hose stream tests conducted under UL Project No. 13CA The fire exposure and hose stream tests were conducted in accordance with the Fourth edition of the Standard, December 12, 2012 and the Fourth Edition of the Standard, Fire Tests of Firestop Systems, CAN/ULC-S115-11, June Test Assembly: The test assembly consisted of a concrete floor and a steel stud/gypsum board wall assembly. The test assembly consisted of one head-of-wall joint system and two wall-to-wall joint system. The construction details of each joint system are described below: Head of Wall Nominal 25mm depth of sealant in 50mm wide joint, finished flush to each of the wall. Sealant backed with 80mm deep mineral wool 60kg/m 3. Faces of the joint finished with steel studs but unlined. Wall to Wall Nominal 25mm depth of sealant in 10mm wide joints, finished flush to each face of the wall. Sealant backed with 120mm deep mineral wool 60kg/m 3. Faces of the joint finished with steel studs but unlined. Wall to Wall Nominal 25mm depth of sealant in 50mm wide joint, finished flush to each face of the wall. Sealant backed with 80mm deep mineral wool 60kg/m 3. Faces of the joint finished with steel studs but unlined. Astro Intu Mastic for use in joint system described in Vol.2 of the UL Fire Resistance Directory. The specific system Nos. and the applicable rating information are as follows: System No. Rating, Hr F FT FH FTH HW-S HW-S Astro Intu Mastic for use in Joints Systems described in the product Certified for Canada Directory. The specific System No. and the applicable rating information are as follows: System No. Rating, Hr F FT FH FTH HW-S HW-S FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS AND/OR JOINT SYSTEMS AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY <R27645>

18 Page 17 of 32 XHHW & XHHW7.R27645 UL Certification Fill or Cavity Materials Certified for US & Canada Maximum Joint Width, mm (in) Min Sealant Thickness, mm (in) Min packing Material Thickness, mm (in) 10 (3/8) 5 (1/4) 120 (4-3/4) 20 (7/8) 10 (3/8) 110 (4-3/8) 30 (1-1/4) 15 (5/8) 100 (4) 40 (1-5/8) 20 (3/4) 90 (3-1/2) 50 (2) 25 (1) 80 (3-1/8) FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS AND/OR JOINT SYSTEMS AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY <R27645>

19 Page 18 of 32 XHHW & XHHW7.R27645 UL Certification Fill or Cavity Materials Certified for US & Canada FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS AND/OR JOINT SYSTEMS AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY <R27645>

20 Page 19 of 32 XHHW & XHHW7.R27645 UL Certification Fill or Cavity Materials Certified for US & Canada FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS AND/OR JOINT SYSTEMS AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY <R27645>

21 Page 20 of 32 XHHW & XHHW7.R27645 UL Certification Fill or Cavity Materials Certified for US & Canada FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS AND/OR JOINT SYSTEMS AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY <R27645>

22 Page 21 of 32 Durability and Serviceability Type Z 1 : Intended for use internal conditions with humidity equal to or higher than 85% RH excluding temperatures below 0 o C, without exposure to rain or UV. The Durability conditions specified for this material was Type Z 1 (23 o C, 40 o C). this is and 8 and 16 hours cycled program with extremities of 23 o C and 40 o C lasting for 21 days. ISO7619-1(2010) Hardness after Curing using Ceast Shore A bench-top durometer (T13) Readings taken after 15s Conditions: 23 o C 50% RH ISO8339:2005 Tensile Properties using instron 6025 test frame, 1kN load cell, environmental chamber, pneumatic grips Conditions: Test rate 5.5mm/s. Temperature as indicate. Note: Three specimens prepared as controls and for durability using M2 mortar and 12mm spacers as indicate in ISO ISO9046;2005 Adhesion properties using instron 5500 test frame, pneumatic grips, 1kN load cell Conditions: 23 o C 50%RH Notes: Three specimens prepared as controls and for durability using M2 mortar and 12mm spacers as indicated in ISO 9046 LEED 2009 EQ c4.1, SCAQMD rule 1168 (2005) - VOC GENERAL TECHNICAL SCHEDULE Sample identification Product type Product Data Astro Intu Mastic Sealant - Other (Fire Resistance) Density: 1.6g/ml at 20 o C Water content: 32.5 g/l Exempt Compounds: none *** Method Principle Parameter Detection Limit Uncertainty Um (%) LEED 2009 EQ c4.1 Gravimetric Total Volatiles, SCAQMD rule g/l 10% Volatile content of the sample was determined gravimetrically by heating up to 110 o C during 60 minutes. The result is the average of double testing. The result was calculated as: ( [g all volatiles] - [g exempt compounds] ) / ( [l material] - [l water] - [l exempt compounds] ) Solid content Water content, % mass Exempt compounds, % mass VOC less water less exempt compounds, g/l *** * * VOC limit for other sealants *** No information about exempt compounds. Set to zero VOC limit g/l

23 Page 22 of 32 TECHNICAL SCHEDULE No. CF 640 This relates to the use of Astro Intu Mastic through 3 rd party certification with Certifire for the fire protection of movement joints within walls and floors. The detailed scope is given in the Approval Matrix. This shows the thickness and acceptable services for Astro Intu Mastic required to provide fire resistance periods in accordance with BS 476: part 20: 1987 of up to 240 minutes for wall/floor constructions. The scope of certification complies with the guidelines stated in the ASFP Red Book: 3 rd Edition for 3 rd party certification schemes. This level of certification is designed to demonstrate compliance of the products or system specifically with Approved Document B (England and Wales). If compliance is required to regulatory or guidance documents there may be additional constructions or conflict to be taken into account. The product is approved on the basis of: I. Initial type testing II. Audit testing at the frequency specified in TS03 III. A design appraisal against TS03 IV. Inspection and surveillance of factory production control The concrete walls shall be at least 150mm thick and the floors at least 230mm thick and have at least the same fire rating as that required for the penetration seal. Masonry and concrete gap faces will be within the density range of 450 to 2300kg/m 3, and gap faces will be free loose or flaking materials Backing or support materials may be polyethylene or polyurethane foam, material or ceramic fibre insulation. The approval relates to ongoing production. Product and/or its immediate packaging is identified with the manufacture's name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFRE certificate number CF640 and application where appropriate.

24 Page 23 of 32 TECHNICAL SCHEDULE No. CF 640 Astro Intu Mastic EN Approval Matrix Wall and Floor Installations :- Double Sided Seals Product Name Astro Intu Mastic Max. Joint Minimum Seal Configuration Backing Material Width (mm) Depth (mm) Polyethylene 30mm autoclaved aerated concrete Wall Constructions (min 250mm thick) Floor Constructions (min 250mm thick) autoclaved aerated concrete autoclaved aerated concrete autoclaved aerated concrete Brick to Autoclaved aerated concrete Brick to Autoclaved aerated concrete Steel to aerated blockwork Steel to aerated blockwork Hardwood to aerated blockwork Softwood to aerated blockwork Aerated concrete to aerated concrete Aerated concrete to aerated concrete Aerated concrete to aerated concrete Aerated concrete to aerated concrete Softwood to aerated conrete Hardwood to aerated cocnrete Steel to aerated concrete Application Technique Integrity (mins) Insulation (mins) Polyethylene 40mm Polyethylene 50mm Polyethylene 60mm Polyethylene 20mm Polyethylene 30mm Polyethylene 40mm Ethafoam 50mm Ethafoam 50mm Ethafoam 30mm Polyethylene 30mm Polyethylene 40mm Polyethylene 50mm Polyethylene 60mm Ethafoam 30mm Ethafoam 50mm Ethafoam 50mm On good clean, virgin blockwork, no priming required.

25 Page 24 of 32 TECHNICAL SCHEDULE No. CF 640 Astro Intu Mastic EN Approval Matrix Wall and Floor Installations :- Single Sided Seals Product Name Astro Intu Mastic Max. Joint Minimum Seal Configuration Backing Material Width (mm) Depth (mm) Polyethylene 50mm autoclaved aerated concrete Wall Constructions (min 100mm thick) autoclaved aerated concrete autoclaved aerated concrete autoclaved aerated concrete softwood softwood softwood softwood steel steel steel steel Application Technique Integrity (mins) Insulation (mins) Polyethylene 40mm Polyethylene 30mm Polyethylene 20mm Polyethylene 50mm Polyethylene 40mm Polyethylene 30mm Polyethylene 20mm Polyethylene 50mm Polyethylene 40mm Polyethylene 30mm Polyethylene 20mm On good clean, virgin blockwork, no priming required.

26 Page 25 of 32 TECHNICAL SCHEDULE No. CF 640 Astro Intu Mastic EN Approval Matrix Wall and Floor Installations :- Single Sided Seals Product Name Astro Intu Mastic Max. Joint Minimum Seal Configuration Backing Material Width (mm) Depth (mm) Polyethylene 50mm autoclaved aerated concrete Floor Constructions (min 150mm thick) autoclaved aerated concrete autoclaved aerated concrete autoclaved aerated concrete softwood softwood softwood softwood steel steel steel steel Application Technique Integrity (mins) Insulation (mins) Polyethylene 40mm Polyethylene 30mm Polyethylene 20mm Polyethylene 50mm Polyethylene 40mm Polyethylene 30mm Polyethylene 20mm Polyethylene 50mm Polyethylene 40mm Polyethylene 30mm Polyethylene 20mm On good clean, virgin blockwork, no priming required.

27 Page 26 of 32 TECHNICAL SCHEDULE No. CF 640 Astro Intu Mastic EN Approval Matrix Wall Installations :- Double Sided Seals Product Name Configuration Max. Joint Width (mm) Astro Intu Mastic Minimum Seal Depth (mm) Backing Material Integrity (mins) Insulation (mins) Wall Constructions (min 120mm thick) autoclaved aerated concrete Drywall to autoclaved aerated concrete Polyethylene 20mm Wall Constructions (min 100mm thick) autoclaved aerated concrete Polyethylene 20mm Application Technique On good clean, virgin blockwork, no priming required.

28 Page 27 of 32 TECHNICAL SCHEDULE No. CF 640

29 Page 28 of 32 TECHNICAL SCHEDULE No. CF 640

30 Page 29 of 32 TECHNICAL SCHEDULE No. CF 640

31 Page 30 of 32 TECHNICAL SCHEDULE No. CF 640

32 Page 31 of 32 TECHNICAL SCHEDULE No. CF 640

33 Page 32 of 32 TECHNICAL SCHEDULE No. CF 640 Air Permeability EN1026 Acoustic Rating BS EN ISO :1995 Pressure (Pa) Positive pressure (m 3 /h/m 2 ) Negative pressure (m 3 /h/m 2 ) R w (C;C tr ) :38(-2;-7) db