Linings for drive sheaves
|
|
- Shavonne Lewis
- 6 years ago
- Views:
Transcription
1 Linings for drive sheaves C u s t o m e r I n f o r m a t i o n Content: Traction 2 K25 2 Production 3 Quality 3 Ropes 4 Assembly 5 Test facilities 6 Brake pads 7 Wheels 7 BECORIT 8 Contact 8 Lining Lock block K 25 D 670 D 920 Becoplast K 22
2 K25: highest COF under wet circumstances Traction safety for drive sheaves The COF (coefficient of friction) between steel rope and liner assures the efficiency of the leading sheave. With knowledge about the influencing factors the BECORIT GmbH can choose the best lining material. These parameters are: moisture temperature lubricant type of steel rope load case acceleration contamination K25: good friction in contact with lubricants acc. to DIN One of our solutions: K25 K25 is preferred used in hoists for coal and ore. It has outstanding chemical properties: It does not soak or swell, it is durable against mine water and rope. Even in this situation K25 has a COF that secures a save system operation. This can also be supported with additional constructive most oils, grease and measures at the lining. For lubricants. Furthermore K25 has a higher friction coefficient the BECORIT GmbH it is a pleasure to give advises. under wet conditions then under dry conditions (see diagram). Even under extreme conditions K25 features a save friction coefficient: In case of heavy load the system operator should expect lubricant squeezing out of the steel 2
3 Customised production process The production of the BECORIT GmbH enables small tolerances and high flexibility. The profiles of linings can have one or several grooves. The design of the lining can also be adapted to the application. Furthermore there are following differences for assembly: complete blocks wedge blocks screwable blocks clampable blocks Due to the design and profile the liners join with the leading sheave to one unit. Fundamentally the inner and outer diameters of the traction (rope) sheave as well as rope diameter and depth of rope groove should be given by all orders. Increases in the pretensioning of lining blocks are specifications and will be given by the BECORIT GmbH. Quality assurance All production steps are subject to permanent review. This includes receiving inspections of all raw materials, as well as quality tests of semi-finished and finished products. We pay special attention to the examination of the physical properties, especially those which influence the friction coefficient. Only after approval the release for delivery is given. All steps are documented traceable. 3
4 Wire Ropes The forces of hanging loads are transmitted by ropes which thereby are stressed in longitudinal direction. The typical stress in one strand while running over a sheave is depicted in the left diagram. Aside from the shown stress spikes the total load separates unevenly across all strands: For an ordinary rope the maximum stress lies in position 8 and 14. For a lang lay rope these positions are 5 and 13. (compare to leftsided simplification). The lower the strands relatively move to each other, the more uneven are separated the forces on the strands: A shorter rope life is the result. Likewise a shorter lifetime results from a hard groove surface because of a strain -hardening of the outer strands. Therefore while designing a sheave consider the compensating movements of the strands as well as the hardness of the groove surface. The BECORIT GmbH has been working since 80 years with this issue: Linings for sheaves can separate the arising loads more even on all strands and can prevent a strain-hardening. It is a pleasure for the BECORIT GmbH to supply you with more information. 4
5 Assembly instructions The lining segments are placed side by side and wedged tightly with strong hammer blows. To close the lining belt key blocks are inserted which are either single part (depicted right) or multiple parts (depicted left). When inserting a single part key block, the remaining gap between the first and last lining block is filled in with the supplied block and small plate until the key block can be fitted in tightly. This block is secured to the pulley rim by means of a screw. When inserting a multiple parts key block, the remaining gap is first closed with the block and the plate until the block can befitted and driven in with light hammer blows. The short block is then inserted and driven in the direction of the arrow (shown in sketch). The same applies for blocks and. The endplate is then tightly wedged into the remaining gap from above. 5
6 Test facilities BECORIT s first priority: Safety. Quality achieves safety. Quality implies research and development, verifications and benchmarking. Therefore the BECORIT GmbH has the most modern facilities for development and verification: For example the most innovative test facility for train brake pads in Europe. Due to these systems braking under extreme weather conditions (snow, ice and low temperatures) can be simulated. This evaluation checks the skills of each brake pad under environment dependence.. Linings for drive sheaves are tested in a friction test facility under different circumferences: Dry wire rope Wet wire rope Lubricated wire rope The BECORIT GmbH also carries out application-oriented tests to assess the suitability of materials for extraordinary uses. 6
7 Brake Pads Brakes are safety components, wherefore the functionality and reliability of the linings is the first priority for the BECORIT GmbH. In doing so highest expectations of several industries are fulfilled: Cable cars, hoists, suspension railways, windmills and trains. To increase the selection and range of pad materials the BECORIT GmbH regularly develops new linings. This regards organic as well as sintered pads. Every lining is developed according to its specific use. Friction wheels BECORIT - Friction wheels are in operation mainly in underground sectors of mining. Here high traction is demanded from the drive units of the locomotives. BECOLAN friction wheels ensure that the driving torque sits securely on the rail. The diversity of possibilities available in the designs of friction wheels means that they can be adapted to fit the type of machine in question in any application. As a result, it is possible to equip both large machines, such as diesel or battery-driven locomotives, as well as smaller shunting trolleys. By developing an appropriate design and geometry of the friction wheel lining, it is possible to achieve an optimum transmission of drive torque and thus ensure a high availability and long working life of the wheels. In many tests there was found an optimal tread what makes possible to give a high standard of safety to the transportation in underground sectors, even on wet rails. 7
8 BECORIT: Safe is safe Our success story began with the production of friction materials for hoisting and lifting systems in mining. That was back in Twenty years later, BECORIT GmbH was also developing brake pads for railway vehicles and became one of the most renowned manufacturers of friction materials across the whole world. It has always been our goal to develop technically innovative products which prove themselves to their users through their excellent quality. This is a general principle which will also ensure our success in the future. We focus on a clear goal: to satisfy our clients worldwide to the very highest degree. Your contact team: BECORIT GmbH Rumplerstraße Recklinghausen Germany Phone: Fax: info@becorit.de Safe is safe Guenter LITSCHKE (Mech.Eng.) Director Sales & Engineering glitschke@wabtec.com Phone: Fax: Mobile: Lukas SCHINK (M.Eng.) Manager Sales & Engineering lschink@wabtec.com Phone: Fax: Mobile: The Becorit GmbH is certified: IRIS; ISO 9001 ISO
HEKAPLAST. PE-HD twin wall cable ducts and cable protection pipes for underground installation. Corrugated and Twin Wall Pipes of Plastics
HEKAPLAST PE-HD twin wall cable ducts and cable protection pipes for underground installation HEGLER HEKAPLAST III/ HEKAPLAST: Twin wall cable ducts or cable protection pipes to DIN 696, manufactured from
More informationon the move ZF Test Systems
ZF Friedrichshafen AG Division Industrial Technology Business Unit Test Systems 94030 Passau Germany Phone +49 851 494-5529 Fax +49 851 494-905529 sales.it@zf.com For a future on the move ZF Test Systems
More informationConveyor belts for toughest transport demands. Conveyor Belt Group
STAHLCORD Conveyor belts for toughest transport demands Conveyor Belt Group Conveyor Belt Group STAHLCORD Conveyor Belts with high impact resistance ContiTech Conveyor Belt Group We are the leading manufacturer
More informationThe New Decanter Generation Westfalia Separator ecoforce. Born to run. GEA Mechanical Equipment / GEA Westfalia Separator Group
Liquids to Value The New Decanter Generation Westfalia Separator ecoforce Born to run GEA Mechanical Equipment / GEA Westfalia Separator Group Manages Everything, Needs Little, Lasts Forever Westfalia
More informationBHARAT HEAVY ELECTRICAL LIMITED, JHANSI Specification No.
NOTE : SCOPE : BHARAT HEAVY ELECTRICAL LIMITED, JHANSI Specification No. CRJ/9577 Item No. SP/CRJ/9577/1 & SP/CRJ/9577/2 Location NEW M.G.HOUSE Quantity 2 NOS. DESIGN, MANUFACTURING, SUPPLY, ERECTION &
More informationPRECISION POLYURETHANES
Company Profile: We at PRECISION POLYURETHANES manufacture and supply various types of Hi - Performance Cast Polyurethane components and other polyurethane products engineered for multipurpose industrial
More informationReinforced concrete slot channel
Applicable Bodies of Rules: DIN EN 1433»Drainage channels for vehicular and pedestrian areas«din 19580»Drainage channels for vehicular and pedestrian areas«the following laying instructions are general
More informationLV bolted straight joint connector BSLB-4/16, BSLU-4/16
BSLB-4/16, BSLU-4/16 These bolted connectors are designed for use in low voltage underground joints.. A brass body; its inner surface grooved at the manufacturing stage provides excellent electrical contact..
More informationVibration isolation pads
10 Vibration isolation pads Bilz vibration isolation pads have been used successfully for many years in a variety of industries as an economical solution in the fight against problems caused by vibration
More informationGERMAN QUALITY AND ENGINEERING
GERMAN QUALITY AND ENGINEERING The RUD Group is a dynamic and modern family group which has been active worldwide for over 135 years. Since the establishment of the Australian subsidiary in 1984, RUD has
More informationMicro-Precision Coil and Formed Wire Products for the Medical Device Industry
Micro-Precision Coil and Formed Wire Products for the Medical Device Industry Precision Metal Components For Medical Devices Specialized, complex parts and sub-assemblies Extreme diameter and length capabilities
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More informationworld of rope published by CASAR
08/2016 world of rope published by CASAR Page 2 5S IN ASSEMBLY Page 4 TRAIN IN SYDNEY RUNS BETTER WITH CASAR PARAPLAST Page 5 LANKO DEEP AHC OTC SPOTLIGHT ON NEW TECHNOLOGY AWARD CASAR Doublefit proves
More informationHMA GROUP AUSTRALIA - NEW ZEALAND - INDONESIA - SOUTH AFRICA SINCE 1966
SINCE 1966 Introduction Geotechnical Systems Australia (GSA) was founded in March 1987 to design, manufacture and distribute geotechnical instrumentation for the geotechnical and mining industries. Now
More informationAutomatic Entrance Specialists
Automatic sliding door for pedestrian entrances and industrial application Automatic Entrance Specialists SPACE Automatic Door Series - for light/medium/heavy applications Why use an automatic door? The
More informationD Glide Materials Information Introduction Applications
D Glide Materials Information Introduction D Glide is the family name of a range of composite bearing materials produced by DRIE-D bv located in The Netherlands. The main properties they share are: -They
More informationWorld Leading Centre of Excellence ROPE TECHNOLOGY DEVELOPMENT & TESTING
World Leading Centre of Excellence ROPE TECHNOLOGY DEVELOPMENT & TESTING STEEL WIRE & SYNTHETIC FIBRE ROPE TECHNOLOGY Unique Testing Capabilities Knowledge Innovation Analysis Verification Assurance The
More informationh Installation Manual
h Installation Manual 1 General Information The installation of HOBAS GRP Pipes is subject to applicable standards and guidelines such as EN 1610 and ISO/ TS 10465-1. Correct installation always requires
More informationFREIGHT ELEVATOR. Safe and reliable control system. Variable Voltage Variable Frequency (VVVF) traction machine. Wide door opening
FREIGHT ELEVATOR Wide door opening FUJI-YIDA freight elevator possesses multi-panel door to get the widest door opening, which will facilitate the passing in and out of large goods. Light Curtain Protection
More informationextra The Project Solutions for Automotive Efficiency Extract Body: LIGHTWEIGHT DESIGN IN THE DOOR OUTER PANEL October 2014 ThyssenKrupp InCar plus
extra Extract Body: LIGHTWEIGHT DESIGN IN THE DOOR OUTER PANEL The Project Solutions for Automotive Efficiency BODY LIGHTWEIGHT DESIGN IN THE DOOR OUTER PANEL Innovative steel products reduce the outer
More informationSERVICES. About Us. EDS Company Ethos. Services. Categories
About Us EDS don t just make stuff. We use our engineering and product development experience to design and develop innovative, practical and cost effective solutions. We work closely with our customers
More informationMoving solutions. Anywhere, anytime. Here, today How to find us. haacon hebetechnik gmbh. Josef-Haamann-Straße 6. D Freudenberg/Main.
Here, today How to find us. Anywhere, anytime Moving solutions. haacon hebetechnik gmbh Josef-Haamann-Straße 6 D-97896 Freudenberg/Main Germany Phone: +49 (0) 93 75 / 84-0 04048 Photo: CERN Fax: +49 (0)
More informationHigh-performance adhesives and functional coatings for composites
Press Release 06.02.2014 Henkel at JEC Europe 2014 High-performance adhesives and functional coatings for composites As market leader in adhesives, sealants and functional coatings, Henkel is exhibiting
More informationTop Performance Pipes for Toughest Conditions
h Top Performance Pipes for Toughest Conditions 2 Corrosion, Abrasion, Impacts: Customized Solutions for the Most Challenging Applications h Top Performance Pipe Systems When aggressive materials are transported
More informationSUMMER 15 EXAMINATION
SUMMER 15 EXAMINATION Subject Code: 17413 ( EME ) Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
More informationCONTRACT MANUFACTURER OF PRECISION POWDERED METAL PARTS
ASCO Sintering Co. CONTRACT MANUFACTURER OF PRECISION POWDERED METAL PARTS Precision Powdered Metal Gears Net Shape to AGMA 8 Certification at reduced cost Executive Summary Asco produces over 16,000,000
More informationLong-term Effects of Interaction between Rolling Stock and Track/Turnout Components Regarding Maintenance Intervals and Durability. R.
Long-term Effects of Interaction between Rolling Stock and Track/Turnout Components Regarding Maintenance Intervals and Durability R. Buda Schwihag Gesellschaft für Eisenbahnoberbau mbh, Tägerwilen, Switzerland
More informationAdvanced FEA Stress Analysis of Medical Instruments and Devices using Femap, NX Nastran and LS-DYNA
Advanced FEA Stress Analysis of Medical Instruments and Devices Title: Medical device (aspiration tip) for bone marrow extraction for endoscopic surgery Keywords: Endoscopic surgical anvil, powder metallurgical
More informationHALFEN HLB LOOP BOX Z-HLB-M50 13-E CONCRETE
HALFEN HLB LOOP BOX Z-HLB-M50 13-E CONCRETE Translation of the General Certificate of Approval Approval Office: German Institute for Construction Engineering (Deutsches Institut für Bautechnik DIBt) Kolonnenstrasse
More informationSOLID ROLLERS CURL FORMED BUSHINGS CARBURIZED PINS PARALLEL PUNCHED LINK PLATES ASSEMBLY
Quality Driven For over 100 years, MORSE high quality domestic chain has provided exceptional value to our customers. When you choose MORSE roller chain, you are choosing an experienced chain manufacturer
More informationON-ROOF ATTACHMENT FLAT COLLECTOR HELIOSTAR
ON-ROOF ATTACHMENT FLAT COLLECTOR HELIOSTAR INSTALLATION INSTRUCTIONS ENERGY AND SANITARY SYSTEMS Installation requirements Generel requirements The on-roof attachment set is capable for installation of
More informationThe Use of the Roof The Upper Level Company
The Use of the Roof The Upper Level Company GTA - Your competent partner GTA made the upper level working By cooperation with the mining industry GTA have acquired vast experience in underground mining
More informationSECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING
7160 Krick Rd., Walton Hills, OH 44146 800-321-3827 - Tel 440-439-8650 - Fax 440-439-6889 SECTION 12 48 16 ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING PART 1. GENERAL 1.01 SUMMARY: This section includes
More informationLifting Appliances of Ships and Offshore Installations
CCS Rule Change Notice For: Lifting Appliances of Ships and Offshore Installations Version: May, 2016. RCN No.1 Effective date: 19 May, 2016 Beijing CONTENTS Chapter 3 CRANES, LIFTS, RAMPS AND SELF-LOADING
More informationHeat Protection Materials Slide-Bearing Materials Ablation Materials
Heat Protection Materials Slide-Bearing Materials Ablation Materials www.brandenburger-isoliertechnik.com Brandenburger Isoliertechnik Reliable - Trustable - Innovative Your specialist for heat protection
More informationCasting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining.
Traditional Manufacturing Processes Casting Forming Sheet metal processing Powder- and Ceramics Processing Plastics processing Cutting Joining Surface treatment FUNDAMENTALS OF METAL FORMING Overview of
More informationValmont Newmark is your single source for steel, concrete or hybrid structures for power delivery
Valmont Newmark is your single source for steel, concrete or hybrid structures for power delivery Valmont Newmark is your single source for steel, A Tradition of Meeting Needs. Building on its steel pole
More informationCONVEYOR PULLEY DESIGN Allan Lill
CONVEYOR PULLEY DESIGN Allan Lill INTRODUCTION Conveyor pulleys are essential components in all conveyor belt systems, which are used throughout the mining industry. The larger conveyor belts are normally
More informationOverhead Contact Lines
Overhead Contact Lines It all began in 1923. Emil Furrer and Arnold Frey founded the company Furrer+Frey. They had learned the overhead line business as engineers and recognised early on that overhead
More informationOptima Dipper Systems Product Overview
Dipper Systems Product Overview Service Leader Zero Harm A breakthrough approach to superior dipper performance Mine-matched dippers P&H dippers, with nominal while at the same time working Highest Production
More informationSTEEL GRATINGS & STAIR STEPS
STEEL GRATINGS & STAIR STEPS Steel gratings and stair steps are resistant small weight holding building units with a long-term life-time used as stairs constructions, bridges and walk-ways used in building,
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT II Hot & Cold Working - Drawing & Extrusion Drawing Drawing is an operation in which the cross-section of solid rod, wire or tubing is reduced or changed in shape by pulling
More informationA-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
More informationT-Series Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 T-Series Gantry Crane This guide can be used to prepare a bid specification for the incorporation of a T-Series Gantry Crane into a competitive bid project or application.
More informationTHE SPECIALIST FOR NO DIG REHABILITATION
THE SPECIALIST FOR NO DIG REHABILITATION DN 50 to DN 250 Private and public drainage Housing management Industry HIGH DEMAND FOR PIPE REHABILITATION The total length of drainage systems on private and
More informationNon-contact temperature measurement from 50 C to 2200 C
high-temperature Applications Non-contact temperature measurement from 50 C to 2200 C Infrared thermometers, infrared cameras and their applications Innovative Infrared Technology High temperature applications
More informationmediatek mediatek Library and archive shelving systems Taking shelving to the next level BC004.03
mediatek Library and archive shelving systems Taking shelving to the next level BC004.03 mediatek Library and archive shelving systems The Mediatek range of shelving is designed to offer space efficient
More informationSTULZ-SICKLES STEEL COMPANY
STULZ-SICKLES STEEL COMPANY SINCE 1916 Providing Years of Wear Resistant Service to the Railroad Industry Railroad ELIZABETH, NEW JERSEY COLTON, CALIFORNIA 800-351-1776 800-572-5809 www.stulzsicklessteel.com
More informationFREEZING AND THAWING TESTS OF COMPACTED SOIL-CEMENT MIXTURE
Test Procedure for FREEZING AND THAWING TESTS OF COMPACTED SOIL-CEMENT TxDOT Designation: Tex-135-E Effective Date: August 1999 1. SCOPE 1.1 This method determines the soil-cement losses, moisture changes,
More informationBRUKS Drum Chippers.
drum chippers BRUKS Drum Chippers BRUKS Drum Chippers produce high-quality wood chips according to the specifications from various industries. 50 years of continuous development and experience from applications
More informationRolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING
Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING Buderus Edelstahl Buderus Edelstahl CONTENTS Buderus Edelstahl 2 Products 4 Production 5
More informationANSI/ ASME HST Performance Standard For Overhead Electric Wire Rope Hoists
SECTION 412213- BRIDGE CRANES Part 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationChapter 4 Surfaces, Tribology, Dimensional Characteristics, Inspection and Product Quality Assurance
Chapter 4 Surfaces, Tribology, Dimensional Characteristics, Inspection and Product Quality Assurance Cross-Section of Metal Surface FIGURE 4.1 Schematic illustration of the cross-section of the surface
More informationAPPLICATIONS. Sealing profiles for windows, doors and gates. A company of the SAARGUMMI Group
APPLICATIONS Sealing profiles for windows, doors and gates A company of the SAARGUMMI Group PERMANENTLY ELASTIC PROFILES FROM THE EXPERTS The ideal seal: NOVOPROOF FE made of EPDM rubber DURAPROOF has
More informationYour partner for CHAIN TECHNOLOGY
Your partner for CHAIN TECHNOLOGY WE HANDLE IT. FOR MORE THAN 120 YEARS HAND IN HAND FOR SUCCESS. KÖBO manufactures products which will only work if all parts mesh with each other. That is why we know
More informationWe provide more than just impulses. PINTSCH TIEFENBACH.
We provide more than just impulses. PINTSCH TIEFENBACH. Company Individual solutions for railway traffic 2 As a supplier of hydraulic components, proximity switches and sensors, our company, founded in
More informationwww.plr-magdeburg.com INTRODUCTION 2 We are your partner for non-destructive testing in the industry branches of automotive industry, railways, power plant technology and mechanical engineering industry.
More informationProduct and. &AvailabilityG. Low Relaxation (LR) Strand. Proudly Australian Made. Effective From: August 2016 Applicable For: Australia
ilabilityguidep &Availability icing&avialab gguidepricing Product and icing&availab Availability Guide GuidePricing ing&availab &AvailabilityG ing&availabil Effective From: August 2016 Applicable For:
More informationSafety on Heights: Our Policy
11/17/14 Safety on Heights: Our Policy Only volunteers over the age of 18 are allowed to work on heights of more than six feet off the ground. This includes all work on scaffolds. Only volunteers who are
More informationLayher. Aluminium Rolling Towers. Layher SuperKlaxTower. Instructions for Assembly and Use
Mobile access and working towers in accordance with: HD 1004; DIN 4422, Part 1 (Version 8/92) Working platform 2.8 x 2.8 m and 2.8 x 1.95 m Max. working height: in closed rooms 13.95 m, outdoors 10.0 m
More informationE-Series Steel Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 E-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an E-Series Gantry Crane into a competitive bid project or application.
More informationGROUP. special. Mechanical Transmissions on Demand. ingranaggi
Mechanical Transmissions on Demand GROUP special ingranaggi A solid and flexible company GROUP special ingranaggi MECHANICAL TRANSMISSIONS ON DEMAND Since 1999 we are the recognised leaders in the manufacture
More informationRESILIENT PHOTOLUMINESCENT STAIR TREADS
THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR CSI FORMATTED 3-PART ARCHITECTURAL GUIDE SPECIFICATIONS. JOHNSONITE WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT
More informationiglidur J200 For Anodized Aluminium iglidur J200 Phone Fax Very long service life with hard anodized aluminium
For Anodized Aluminium Very long service life with hard anodized aluminium Low coefficients of friction Low wear Maintenance-free 28.1 For Anodized Aluminium The specialist for low friction-values and
More informationProduct Information. Polyester Felt Cured-In-Place Pipe (CIPP) Lining Tube
1468 West Hospital Road Paoli, Indiana 47454 Phone: (812) 723-0244 Fax: (812) 723-0405 Polyester Felt Cured-In-Place Pipe (CIPP) Lining Tube Revised November 16, 2016 Company Profile Product Types Resins
More informationFW66 FORESTRY WINCH FW66. Owner s Manual 19/02/2016
FW66 FORESTRY WINCH FW66 19/02/2016 Owner s Manual TABLE OF CONTENTS INTRODUCTION ---------------------------------------------------------------------------------- 2 INTENDED USE -----------------------------------------------------------------------------------
More informationCarbon film resistors
Carbon film resistors (6.3 φ 2.4 size: 1 / 3W) ROHM resistors are produced using an integrated production system for parts and materials, and state of the art technology to ensure high precision productivity,
More informationHEAVY DUTY RUBBER CONVEYOR BELT. Telephone: (516) Sales: Customer Service:
HEAVY DUTY RUBBER CONVEYOR BELT Nylon / Nylon Conveyor Belt Polyester / Nylon Conveyor Belt High Abrasion Resistant Conveyor Belting - HARK NYLON FABRIC (NN) CONVEYOR BELT 02 Item Unit NN100 NN120 NN150
More informationCarbonitrided Rolling Bearings. Longer operating life under boundary lubrication and contamination
Carbonitrided Rolling Bearings Longer operating life under boundary lubrication and contamination Longer operating life under boundary lubrication and contamination Carbonitrided rolling bearings Figure
More informationINSTALLATION OPERATION AND MAINTENANCE MANUAL GEARLESS MG300
Page 1 of 12 INSTALLATION OPERATION AND MAINTENANCE MANUAL GEARLESS MG300 Aim The aim of this manual is to provide instructions for the correct installation, use and maintenance of the GEARLESS type MG300
More informationAllround Scaffolding. Layher Allround Bridging System Instructions for Assembly and Use. Modular truss system for wide spans
Layher Allround Bridging System Instructions for Assembly and Use Modular truss system for wide spans Certification according to DIN ISO 9001/EN 29 001 by TÜV-CERT Allround Scaffolding } CONTENT 1. Introduction...3
More informationDesign of a Small Movable Lifting Machine Overall Structure. Yingchun Liu
3rd International Conference on Management, Education, Information and Control (MEICI 2015) Design of a Small Movable Lifting Machine Overall Structure Yingchun Liu Weifang University of Science & Technology,Shandong,
More informationOptimized crusher selection for the cement industry
Optimized crusher selection for the cement industry - Technical Paper for - APCAC, XXVI Technical Congress, September 7 th -10 th, 2009 Bogota Colombia By Jürgen Muckermann ThyssenKrupp Fördertechnik GmbH,
More informationBKP Berolina Polyester GmbH & Co. KG. Berolina-Liner System Lightspeed in gravity pipe rehabilitation!
BKP Berolina Polyester GmbH & Co. KG Berolina-Liner System Lightspeed in gravity pipe rehabilitation! Berolina-Liner System The Berolina-Liner System sets new standards in pipe rehabilitation. With the
More informationFederal Statistical Office
Federal Statistical Office Wiesbaden, 17 November 2010 Joint press conference of the Federal Statistical Office Germany and the Federal Environment Agency Germany Raw material efficiency: reducing the
More informationCardok Sàrl CP37 CH-1295 Tannay Switzerland Phone:
CARDOK CARLIFT with Rigid chains technology Very fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built
More informationSimufact 12 th Round Table Conference Bamberg, Germany
Simufact 12 th Round Table Conference Bamberg, Germany Design Robustness & Process Capability By Simufact & 6 Sigma Dr. Kunding Wang/Principal FEA Analyst Luk USA LLC Wooster, Ohio, USA Schaeffler Group
More informationSUGGESTED SPECIFICATION SECTION ENTRANCE FLOOR MATS AND FRAMES
Note: After downloading this spec, the Specifier must choose the correct Finish, Insert and Frame options and delete all other options to produce an accurate specification. GRIDLINE (G6) SUGGESTED SPECIFICATION
More informationFFU synthetic sleepers Composite Slim tie and longitudinal baulks
FFU synthetic sleepers Composite Slim tie and longitudinal baulks Continuous glass-fibre and Polyurethane durability of plastics light weight and workability like wood Pultrusion process FFU sleepers are
More informationQuestionnaire in preparation for an audit according to IRIS (International Railway Industry Standard)
Page 1 of 9 Dear Customer, as a certification body for the certification of management systems we require some information about your company in order to provide you with an offer and to plan and prepare
More informationOptical Connector Characteristics and Their Impact on System Performance and Reliability
Optical Connector Characteristics and Their Impact on System Performance and Reliability There are a large number of issues that affect the performance of fiber optic connectors in today s networks. These
More informationRailway Freight Car Inspection and Safety Rules
Railway Freight Car Inspection and Safety Rules December 9, 2014 PART I GENERAL... 3 1. SHORT TITLE... 3 2. SCOPE... 3 3. DEFINITIONS... 3 4. SAFETY INSPECTIONS... 5 5. PRE-DEPARTURE INSPECTION... 6 6.
More informationSCHOTT is an international technology group with more than 125 years of experience in the areas of specialty glasses and materials and advanced
Ampoules 2 SCHOTT is an international technology group with more than 125 years of experience in the areas of specialty glasses and materials and advanced technologies. With our high-quality products and
More informationBosch TCE 4470 and TCE 4475 A new standard in professional tire changing
Bosch TCE 4470 and TCE 4475 A new standard in professional tire changing TCE 4470 and TCE 4475 Maximum performance and durability TCE 4470 S441 TCE 4475 S44 TCE 4470 and TCE 4475 are pneumatic tilting
More informationLOAD BEARING ROLLER ASSEMBLIES Engineering Data Installation Notes
Installation Notes INSTALLING STUD TYPE LOAD BEARING ROLLER ASSEMBLIES Mounting holes should be machined to the nominal stud size within +.001/-.000 (+.025mm / -.000mm) tolerance. When properly aligned,
More informationOmega seals Trelleborg Ridderkerk BV
Omega seals Trelleborg Ridderkerk BV Contents 1 Introduction 3 2 Design of an Omega Seal 3 3 Applications 4 3.1 Immersed tunnels 4 3.2 Bored tunnels 5 3.3 Aqueducts, canals, sluices and other applications
More informationRail Level Crossings HEAVY DUTY HigH SpEED NATUrAl rubber rail level CroSSiNgS
Rail Level Crossings HEAVY DUTY High Speed Natural Rubber Rail Level Crossings Trelleborg in Australia. Trelleborg Engineered Systems is part of the worldwide Trelleborg Group. The Trelleborg Group purchased
More informationDevelopment Of Condition Based Maintenance For Coal Handling Plant Of Thermal Power Stations. By: Makarand M. Joshi
Development Of Condition Based Maintenance For Coal Handling Plant Of Thermal Power Stations By: Makarand M. Joshi Email: makarandj@hotmail.com 1.0 Abstract: - In the thermal power plants maximum requirements
More informationNational technical approval Coupler
National technical approval Coupler Z-1.5-100 12.02.2015 english Mechanical connection of B500B reinforcing steel bars with screw couplers Nominal diameter: 12 to 32 mm Tested by: DIBt, Berlin Max Frank
More informationSLIM IN DESIGN - BIG IN FUNCTIONALITY
SLIM IN DESIGN - BIG IN FUNCTIONALITY Solar carport in noble wood craft as single or double version. Highest German Quality and Experience Floating elegance: Solar carport on timber arcades. This solar
More informationBulk Deformation Forming - Rolling
1 Bulk Deformation Forming - Rolling Overview - Shaping and Forming Powders Pressing SLS Special Injection Molding Firing/ Sintering 2 Raw Material Molten Material Continuous Casting/Rolling Ingot casting
More informationAttractive, Durable Composite Sound Walls
SOUND BARRIER SYSTEM Attractive, Durable Composite Sound Walls AcoustaShield sound barrier systems meet or exceed AASHTO and DOT sound wall guidelines. SOUND BARRIER SYSTEM Carsonite AcoustaShield sound
More informationInstallation Manual. Orion. TL-3 Steel Barrier. VHD (v2)
Installation Manual Orion TL-3 Steel Barrier VHD (v2) 300914 Table of Contents Orion Introduction.......... 3 Limitations & Warnings. 4 Before Installation..... 3 System Design & Design Considerations
More informationTesting devices for extreme temperature
Prüfstandssysteme Testing devices for extreme temperature In the automotive industry testing devices have today become indispensable. They play an important role in research and development and help to
More informationPETREX -CNT. Pipe systems for petrol stations Technical details
PETREX - Pipe systems for petrol stations Technical details Contents 1.0 1.0 Contents 1.10 1.100 System description System description PETREX - 1.11 1.11.01 Product overview Piping, connections, fittings
More informationDemonstrate an advanced knowledge of railway signals
Page 1 of 5 Demonstrate an advanced knowledge of railway signals Level 4 Credits 15 Purpose People credited with this unit standard are able to: demonstrate an advanced knowledge of fixed railway signals,
More informationHoesch isorock vario Installation recommendations
A company of ThyssenKrupp Steel 1/12 D tk Info 2.4.2 5.2005 1 Table of contents Page 1. Regulations / Directives 2 2. Delivery / Unloading 3 3. Storage on the site 4 4. Preparation for installation 4 5.
More informationiglidur A180 FDA-general purpose waterproof material
A18 A18 FDA-general purpose waterproof material Standard range from stock The A18 material complies with FOOD AND DRUG ADMINISTRATION (FDA) regulations For direct contact with food or pharmaceuticals For
More informationPump Division MSX Solids-Handling, Submersible Pumps
MSX Solids-Handling, Submersible Pumps Bulletin PS--2f (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
More informationA wide range of cold-formable steel grades and aluminium alloys are used as wire materials within a diameter range from 5 mm to 34 mm.
Cold-Formed Parts 2 ESKA manufactures complex precision cold-formed parts for applications with large and medium quantities. The highly-efficient cold- forming process ensures economic manufacture of near-net-shape
More information