The multi-shaft! New for Infiltration shaft system DN 400/600. Inspection shaft. Filter shaft. Choke drain shaft. Infiltration ditch

Transcription

1 Infiltration shaft system DN 400/600 The multi-shaft! New for 2011 Inspection shaft Filter shaft Choke drain shaft Infiltration ditch edition 2011 EN sales folder Infiltration 31

2 GRAF Infiltration shaft system DN 400 Covers Telescopic dome shaft 400 With PE cover, suitable for pedestrian loading, grass green colour Telescopic dome shaft 400 class D With cast iron cover, lorry-bearing class D, black colour Telescopic dome shaft 400 class B With cast iron cover, suitable for vehicle loading class B, black colour Telescopic filter shaft 400 class B With slotted cast iron cover, suitable for vehicle loading class B, incl. coarse filter insert and fine filter basket ( 0,35 mm mesh width ) black colour Individual components Infiltration inlet module DN 400 incl. profile seal for telescopic dome shaft; DN150/DN 200 connections Infiltration filter strainer DN 400 Mesh width 0.35 mm Infiltration connecting piece DN 400 To produce greater installation depths, useful length 500 mm/250 mm Infiltration distributor module DN 400 incl. profile seal for Infiltration connecting piece and/or inlet module; 2 x DN 150 connections; mounting surface for connections of up to DN Infiltration choke drain Connection DN 100; including overflow DN 100; delayed drain of 0,5 up to 6,5 l/sec

3 GRAF Infiltration shaft system DN 600 Variabel einsetzbar Als Filterschacht l Als Inspektionsschacht l Als Drosselablaufschacht l Als Rigolenüberlauf l Covers Maxi telescopic dome shaft With PE cover, suitable for pedestrian loading, grass green colour Cast telescopic dome shaft With cast iron cover, suitable for vehicle loading class B, black colour BEGU telescopic dome shaft For common concrete rings, lorry-bearing class D, black colour, BEGU covering on site Individual components Infiltration inlet module DN 600 incl. profile seal for telescopic dome shaft; DN 150/DN 200/DN 250/DN 300 connections Infiltration connecting piece DN 600 To produce greater installation depths, useful length 500 mm/250 mm Infiltration distributor module DN 600 incl. profile seal for Infiltration connecting piece and/or inlet module; 2 x DN 150 connections; mounting surface for connections of up to DN Infiltration filter strainer DN 600 Completely made from stainless steel, mesh width 0.50 mm Infiltration connecting piece DN 600 To produce greater installation depths, useful length 300 mm Infiltration choke drain Connection DN150; including overflow DN150; delayed drain of 2,0 up to 13 l/sec

4 The GRAF percolation modules Rain bloc Rain bloc Item Volume [litres] Cars Green Lorries Black Inspect rain bloc Can be inspected using inspect channel Item Lorries Black GRAFT rain bloc Infiltration tunnel Car Infiltration tunnel Volume [litres] Black Twin car infiltration tunnel incl. 6 click bolt connectors Volume [litres] Black GRAF infiltration tunnel End plate for Infiltration tunnel / Twin Article End plates ( Set 2 units ) Black

5 GRAF Infiltration shaft system Areas of use The GRAF Infiltration shaft system is the final addition to the proven GRAF percolation modules and is perfectly coordinated for use with the Rain bloc and tunnel. The Infiltration shaft system basically comprises an inlet and distributor module of either DN 400 or DN 600 in diameter. The appropriate cover can be selected depending on the load class required (up to class D). As filter shaft Shaft extensions between the two main modules (also above the inlet module with the DN 600 diameter version) ensure a simple connection even for percolation systems with high earth coverings. As inspection shaft Infiltration filter strainer Pipe with 90 or 2 x 45 angle ( on site ) As infiltration ditch overrun As choke drain shaft Telescopic filter shaft Infiltration choke drain

6 Infiltration shaft system DN 400/600 e Technical details Measurements DN 400 DN 600 Total height [h total ] min mm 1690 mm max mm 5205 mm z t Telescopic [t] min. 114 mm 140 mm max. 420 mm 440 mm of inlet module [h 1 ] 680 mm 650 mm of distributor module [h 2 ] 1000 mm 1000 mm h 1 a 1 Inlet depth [z] min. 450 mm 475 mm max mm 3985 mm h total a 2 Drain depth [a 1 ] min. 845 mm 950 mm max mm 4465 mm Drain depth [a 2 ] min mm 1365 mm max mm 4880 mm Diameter [d] 475 mm 690 mm h 2 Connections Inlet DN 150/200 DN 150/200 DN 250/300 Drain 2 x DN x DN 150 Ø Access [e] 400 mm 600 mm d Recommended by: All measurements and content details given in this brochure are subject to a tolerance of +/- 3%. We reserve the right to make technical changes and further developments to individual products. Errors are excepted. Our General Conditions of Sale and Delivery ( as at 01/03/2010 ) apply exclusively to all offers and contract conclusions. We will gladly send you a copy on request. Otto Graf GmbH Kunststofferzeugnisse Carl-Zeiss-Straße 2-6 D Teningen Phone: +49(0)76 41/ Fax: + 49(0)76 41/ mail@graf.info Otto Graf GmbH, Teningen. Reprints and reproduction only with written consent. Art. no /EN