GLAZED CERAMIC / COLORBODY PORCELAIN IDENTITY FLOOR/WALL

Transcription

1 GLAZED CERAMIC / COLORBODY PORCELAIN IDENTITY FLOOR/WALL

2 IDENTITY WALL IDENTITY FLOOR GLAZED CERAMIC COLORBODY PORCELAIN floor wall countertop Envelop your space with the contemporary elegance of Identity Floor, a ColorBody porcelain tile with three unique surfaces. Fabric resembles fine tweed with subtle grains and metallic specks. Grooved mirrors the depth of raked sand. Cement embodies the modern style of a cement-look, combined with movement and variation. This line contains a vast range of colors, sizes, and finishes that can bring to life the identity of your space. Add more personality to your space with the addition of Identity Wall. Available in the same seven coordinating colors as the floor tile, this wall line comes in a contemporary 8 x 20 size, which is available in gloss and matte finishes. A coordinating gloss and matte decorative accent is also available in each color and is sure to make a subtle yet memorable statement. Cover photo features Imperial Gold, Fabric (Unpolished) 12 x 24 and 24 x 24 field tile on the floor. Wall features Imperial Gold, Gloss 8 x 20 wall tile and decorative accent.

3 Photo features Paramount White Matte 8 x 20 wall tile in a diagonal grid pattern on the wall. Floor features Twilight Black Grooved (Unpolished) 12 x 24 field tile in a grid pattern.

4 IDENTITY FLOOR COLORBODY PORCELAIN floor wall countertop Floor Tile FABRIC (LIGHT POLISHED & UNPOLISHED) METRO TAUPE MY22 Close-up of Fabric Tile PARAMOUNT WHITE MY20 BISTRO CREAM MY21 IMPERIAL GOLD MY23 OXFORD BROWN MY24 CASHMERE GRAY MY25 TWILIGHT BLACK MY26 GROOVED (12 X 24 ONLY - LIGHT POLISHED & UNPOLISHED) PARAMOUNT WHITE MY30 BISTRO CREAM MY31 IMPERIAL GOLD MY33 METRO TAUPE MY32 Close-up of Grooved Tile OXFORD BROWN MY34 CASHMERE GRAY MY35 TWILIGHT BLACK MY36 CEMENT (18 X 18 ONLY - UNPOLISHED ONLY) PARAMOUNT WHITE MY40 BISTRO CREAM MY41 IMPERIAL GOLD MY43 METRO TAUPE MY42 Close-up of Cement Tile OXFORD BROWN MY44 CASHMERE GRAY MY45 TWILIGHT BLACK MY46

5 Floor Decorative Accents (Available in Unpolished Fabric only) CREAM/BROWN MY51 GOLD/BROWN MY53 TAUPE/TAN MY52 WHITE/BLACK MY50 GRAY/BLACK MY54 Mosaics (Available in Unpolished Fabric only) PARAMOUNT WHITE MY20 BISTRO CREAM MY21 METRO TAUPE MY22 IMPERIAL GOLD MY23 OXFORD BROWN MY24 CASHMERE GRAY MY25 TWILIGHT BLACK MY26

6 IDENTITY WALL GLAZED CERAMIC floor wall countertop Wall Field Tile (All colors are also available in Gloss Field Tile) MATTE PARAMOUNT WHITE MY67 MATTE BISTRO CREAM MY69 MATTE METRO TAUPE MY71 MATTE IMPERIAL GOLD MY70 MATTE CASHMERE GRAY MY72 MATTE OXFORD BROWN MY73 MATTE TWILIGHT BLACK MY68 Wall Decorative Accents (All colors are also available in Gloss Decorative Accents) MATTE PARAMOUNT WHITE MY67 MATTE BISTRO CREAM MY69 MATTE METRO TAUPE MY71 MATTE IMPERIAL GOLD MY70 MATTE CASHMERE GRAY MY72 MATTE OXFORD BROWN MY73 Close-up of Wall Decorative Accent MATTE TWILIGHT BLACK MY68

7 Photo features Oxford Brown (Light Polished) 24 x 24 field tile on the floor and Oxford Brown Gloss 8 x 20 wall tile and Gloss decorative accent on the wall.

8 IDENTITY FLOOR COLORBODY PORCELAIN SIZES 24 x 24 Field Tile (Fabric only) 12 x 24 Field Tile* (Fabric & Grooved) 18 x 18 Field Tile** (Fabric & Cement) 12 x 12 Field Tile (Fabric only) 1 x 3 Mosaic (Mesh-mounted) (Unpolished Fabric only) 12 x 24 Decorative Accent 23-1/2" x 23-1/2" (59.8 cm x 59.8 cm) 11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) 17-5/8" x 17-5/8" (44.8 cm x 44.8 cm) 11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) Sheet: 11-3/4" x 11-3/4" (29.8 cm x 29.8 cm) 11-3/4" x 23-1/2" (29.8 cm x 59.8 cm) n Grooved available in 12 x 24 unpolished and light polished only. s Cement available in 18 x 18 unpolished only. SQ.FT. PCS. PER TRIM TYPE NUMBER SIZE Bullnose (Fabric) (Light Polished & Unpolished) Bullnose (Grooved) (Light Polished & Unpolished) Bullnose (Cement) (Unpolished) PCS. PER S-44C9 4 x S-44F9 4 x S-44H9 4 x Cove Base (Fabric) S-36C9TB 6 x Cove Base Outcorner (Fabric) SC-36C9T 1 x 6 15 SHADE VARIATION MEDIUM (V2) Color variation within each tile. LINEAR OPTIONS SIZES 6 x 24 Field Tile 6" x 23-1/2" (14.63 cm x 59.8 cm) SQ.FT. PIECES PER INSTALLATION THICKNESS 3/8" GROUT JOINT RECOMMENDATION 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%) 4 x 24 Field Tile 2 x 24 Field Tile 4" x 23-1/2" (9.73 cm x 59.8 cm) 2" x 23-1/2" (4.67 cm x 59.8 cm) Additional linear and rectangular sizes available through Linear Options, Daltile s linear cutting service. Visit for sizes and order information. RESIDENTIAL USAGE FLOORS WALLS COUNTERTOPS EXTERIOR PATIOS EXTERIOR POOL DECKS F W C EP ** ED * All surfaces are suitable for pool linings. *Fabric Unpolished surface only. **Unpolished only. COMMERCIAL USAGE RESIDENTIAL INTERIOR EXTERIOR LIGHT COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL Floors/Patios * * * Walls/Backsplashes Countertops Pool Decking** Pool Linings * Unpolished only ** Fabric (Unpolished only) FABRIC (Unpolished only): Suitable for exterior patios (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed. GROOVED: Suitable for exterior patios (excluding pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed. CEMENT: Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed. SLIP RESISTANCE (WET) : 2 & 3 The higher the rating, the higher the slip resistance. 1 < (Light Polished) 3.60 (Unpolished) TEST RESULTS NOTES (Unpolished only) ASTM# RESULT Water Absorption C373 < 0.5% Breaking Strength C648 > 550 lbs Scratch Hardness MOHS 8.0 (6.0 for Twilight Black) Chemical Resistance C650 Resistant Coefficient of Friction (Unpolished) C1028 Wet: 0.60 Dry: 0.70 Coefficient of Friction (Light Polished) C1028 Wet: 0.50 Dry: 0.60 Identity Fabric (Light Polish Surface) **Please Read Carefully** Note to Tile Installer: This product is directional by design and MUST be installed with the arrows on the back of each tile facing in the same direction. Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation. Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. For additional information refer to Factors to Consider at: Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

9 IDENTITY WALL GLAZED CERAMIC SIZES TRIM SQ.FT. PCS. PER TYPE NUMBER SIZE PCS. PER 8 x 20 Field Tile 7-1/8" x 19-9/32" (20.0 cm x 50.0 cm) Jolly S-5810J 1 x x 20 Decorative Accent 7-1/8" x 19-9/32" (20.0 cm x 50.0 cm) SHADE VARIATION RESIDENTIAL USAGE FLOORS WALLS COUNTERTOPS EXTERIOR PATIOS EXTERIOR POOL DECKS F W C * EP ED Suitable for non-freezing climates when proper installation methods are followed. *Dark colors may show scratches. INSTALLATION THICKNESS MEDIUM (V2) Color variation within each tile. GROUT JOINT RECOMMENDATION 5/16" 1/16" COMMERCIAL USAGE RESIDENTIAL INTERIOR EXTERIOR LIGHT COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL Floors/Patios Walls/Backsplashes Countertops* Pool Decking Pool Linings Suitable for exterior walls in non-freezing climates when proper installation methods are followed. * Dark colors may show scratches. TEST RESULTS NOTES ASTM# RESULT Water Absorption C373 < 20.0% Breaking Strength C lbs Scratch Hardness MOHS Chemical Resistance C650 Resistant Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation. Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. For additional information refer to Factors to Consider at: Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

10 IDENTITY WALL IDENTITY FLOOR GLAZED CERAMIC COLORBODY PORCELAIN floor wall countertop By their very design, Daltile products can help make it easier for you to earn LEED points and/or points towards many industry leading green home building programs. From using recycled material content to establishing manufacturing facilities within 500 miles of your project, we help ensure you don t have to compromise your design to be environmentally conscious. For detailed information, visit daltilegreenworks.com C. F. Hawn Freeway Dallas, TX TILE For more information about Daltile products and services, visit our website at daltile.com 2012 Dal-Tile Corporation (6/12) SSDTIDENTITY