MICRO-PS CLEANROOMS PARTITION SYSTEM

Transcription

1 MICRO-PS CLEANROOMS PARTITION SYSTEM

2 KEY POINTS Stiffness and lightweight Self-supporting The MICRO-PS system is the most evolved solution for creating high-tech partitions in Clean Rooms; the system has been developed in compliance with the strictest specifications applied in the semiconductor sector. Easily removable and relocatable APPLIANCES Cleanrooms for the Semiconductor, Microelectronic, Electronic, Optical, Mechanical and Aerospace industries. Silicone-free Seal between panels guaranteed by ballonet gaskets

3 WALL SYSTEM CLEANROOMS PARTITION SYSTEM MICRO-PS 3 COMPONENTS DESCRIPTION Coating in sheet aluminium, either pre-painted or in stainless steel Internal spacing in aluminium honeycomb or rock wood or polystirene panels Internal frame in extruded aluminium profiles Tightness between panels by means of ballon gaskets Mechanical hooks with camme movement Epoxy-polyester powder paint, RAL9010 colour or electrically conductive paint. OPTIONAL ACCESSORIES Portholes Portholes in glazed shatterproof VISARM 3+3/30/3+3 glass fitted in special anodized extruded aluminium frames mounted flush with the panels without the use of sealants. Available sizes: 800 x 800 mm or 800 x 1600 mm Air return grilles Panels can be made with punched air return grilles: no additional device shall be mounted and the grille s surface shall be perfectly flushed to panel s surface. Sockets The walls can be fitted with channels and boxes for the installation of switches, electric sockets and data/telephone sockets.

4 CONSTRUCTION DETAILS Joints between panels The joints between the panels are stable and safe because the have been made with three mechanical hooks: this guarantees a perfect bond between one panel and the adjoining one, thus ensuring compression of the contact gaskets. The seal between the panels is guaranteed by a perimeter gasket: an optimal insulation of the rooms is thus ensured even if subjected to different pressure. No silicone required. Support system The walls are assembled under the grid ceiling with a detachable track system and locked to the ground by means of small plates attached to the floor. By using this system it is easy to detach the walls and reorganize the perimeter closures in the Cleanrooms: any panel can be easily and singularly removed without the need to remove any other panels. Skirting boards There are four models of skirting boards available to connect the corner formed by the wall and the floor and to make cleaning operations easier. Thay are easily assembled and made in a way so as to conceal thr clamping screws

5 DOORS SANDWICH CLEANROOMS PARTITION SYSTEM MICRO-PS 5 Jamb and wing frame in extruded anodised aluminium with rounded edges complete with special slots to house the sealing gasket Outer panels in aluminium sheets or painted galvanised steel or stainless steel, Honey-comb inner panels, or mineral wool or polystyrene panels Seals around the whole perimeter Hinge: invisible, with seat inside the jamb and wing profiles Knob in satin-finish aluminium TRASPARENT Jamb and wing frame in extruded anodised aluminium with rounded edges complete with special slots to house the sealing gasket Wing: a single glass panel in VISARM 3+3 layered glass Seals: tubular air-filled rubber gaskets Hinge: invisible, with seat inside the jamb and wing profiles Horn shaped handle in stainless steel

6 DOORS OPTIONAL ACCESSORIES Door-closer Internal: mechanical aerial door closing hidden inside the top rabbet crossbeam, with an adjustable load return device. External: mechanical aerial door closing fixed to the top rabbet crossbeam, with an adjustable load return device (available in stainless steel on request). Handles Handle with lock Stainless steel horn shaped Safety emergency handles attached at one point. Interlock Door interlocking system formed of an electric antipanic match, red/button/green leds, control unit and connection leads. Portholes (only for Sandwich Doors) Portholes in glazed shatterproof VISARM 3+3/30/3+3 glass fitted in special anodized extruded aluminium frames mounted flush with the panels without the use of sealants. Dimensions: 435x435mm Draught excluder Pivoting brush inserted into the lower part of the door, to increase the air-tightness of the door

7 TECHNICAL DATA CLEANROOMS PARTITION SYSTEM MICRO-PS 7 WAL SYSTEM Height Any measurements up to a maximum of mm. Width mm: other dimensions on request Thickness Weight Surface resistivity Resistance to compression 42 mm With aluminium honeycomb spacing: 10 kg/m² With rock wool spacing: 13 kg/m² With polystirene spacing: 9,5 kg/m² Standard painting: >3 G ohm Static-dissipating varnishing: 10^6 ohm/m² 0,3 MPa SANDWICH DOORS Height Width Standard: mm, altre misure a richiesta Standard: mm, other dimensions upon request Single wing: mm, other dimensions on request Double wing: mm, other dimensions on request Thickness Weight 42 mm Single wing: 31 kg Double wing: 58 kg TRASPARENT DOORS Height Width Standard: mm, altre misure a richiesta Standard: mm, other dimensions upon request Single wing: mm, other dimensions on request Double wing: mm, other dimensions on request Thickness Weight 42 mm Single wing: 29 kg Double wing: 54 kg

8 CLEAN ROOMS DEDICATED SYSTEMS CLEAN ROOM COMPONENTS SPECIAL EQUIPMENT PLANT 6/16 prograf.it MICROELECTRONICS PRINTED CIRCUITS FALSE CEILINGS AIR SHOWERS CONDITIONING ELECTRONICS BOTTLING MOTOISED FANS TRANSFER HATCHES SUCTION PHARMACEUTICAL HOSPITALS WALLS CLEAN CABINS AIR DUCTING HOSPITALS PHARMACEUTICAL FLOATING FLOORS DUST REMOVAL BOTTLING FOOD CEILING FIXTURES CHANGING ROOM FITTINGS Galvani srl Via Monte Lessini, San Giovanni Lupatoto (VR) Italy - Tel Fax sales@galvani.com