SCHEDULE OF QUANTITIES INTERIOR WORKS FOR RACC,GADAG Description Qty. Unit Rate Amount

Transcription

1 Item No. 1 PARTITION 1.1 DOUBLE SKIN WOODEN PARTITION SCHEDULE OF QUANTITIES INTERIOR WORKS FOR RACC,GADAG Description Qty. Unit Rate Amount Providing and fixing 71 mm thick solid fully or partly glazed partition with 6mm thick glass panels with film/ etching/ acid wash in designs/ patterns for various heights (4', 5', 7, 8' & up ceiling height as per drawing and following specifications Main structure: Providing & fixing in position as per the layout full metal stud dry wall partition with the following specifications: a) supporting system comprising of best locally available make 51 X 35 X 0.55 mm thick G.I. metal 600 mm c/c and 51 X 32 mm metal tracks at floor, middle, door and ceiling level with joints staggered. The verticals should touch the ceiling with horizontal ceiling channel at slab/beam bottom. The rate should include necessary strengthening with studs/tracks or channel at doors and other openings. b) 9 mm BWR plywood fixed on both sides with 25 mm dry wall screws. c) 1 mm laminate on both sides (dark for bands, light for body) upto false ceiling level. d ) 6 mm thick clear float glass with etching design as directed between 1050 X 2000 mm level in specified areas fixed with 85 X 15 mm beech wood jamb and 12 X 12 mm beech wood beading. e) All beech wood members to have melamine polish finish. Length X height upto false ceiling will measured for payment. For low height partitions 85 X 15mm beech wood capping on top and sides of openings. The beech wood members to have melamine polish finish. d) 8 mm glasses with edges polished and with etching design above 3'-0 height at specified areas as directed. 1.2 ALUMINIUM PARTITION Aluminum Partition:- Providing & fixing firmly in position Aluminum glazed partition comprising of 1.5 mm thick 83.5 mm vertical member, top & bottom and middle member, powder coated in colour as approved. Providing & fixing 6 mm thick clear glass using aluminum beading with rubber gasket etc. complete Page 1

2 2 DOORS IN PARTITION 2.1 WOODEN DOORS 2.1 Providing & fixing 35 mm BWR thick solid core flush with 85 X 15 mm beech wood jamb alround and 12 X 12 mm button beading fixed with 1 mm laminate (dark for bands and light for body) on both sides and 8 mm clear float glass with etching design as directed with 50 X 15 mm beech wood jamb alround the glass opening and 12 X 12 mm beech wood beading for fixing of glass on both sides including necessary hardware viz: door stopper, door silencer, Doorset lock (Godrej etc.), handles, brass hinges of approved make & quality, melamine spray polish finish to all beech wood members etc. complete as directed. 2.2 ALUMINIUM DOORS Providing & fixing in position Aluminum glazed door comprising of 1.5 mm thick 83.5 mm vertical member, top & bottom and middle member, powder coated in black colour, floor spring & pivot on top. Providing & fixing 6 mm thick clear glass using aluminum beading with rubber gasket etc. providing & fixing customised door handle etc. complete. 3 WALL PANELLING Providing & fixing GI metal stud wall panelling with the following specification: a) Supporting system comprising of best locally available make 51 X 35 X 0.55 mm thick GI metal 600 mm c/c and 51 X 32 mm metal tracks at floor, middle, door level and ceiling level with joints staggered. The verticals should touch the ceiling with horizontal ceiling channel at slab/beam bottom. b)9 mm BWR plywood fixed on one side with 25 mm dry wall screws for the entire height of panelling. c)1 mm laminate (dark for bands, light for body) upto false ceiling level. e)all beech wood members to have melamine polish finish. (length X height up to false ceiling will be measured for payment.) STORAGE UNITS Supplying, manufacturing & fixing follwing sizes wooden storage system made out of 19mm thick BWR grade block board for front, side, back, top & bottom and pasted with 1.0 mm thick approved laminate and providing shutters with spring loaded hinges of approved make including the cost of providing handles, lock, required no. of shelves, filing hangers, latches, magnet catch, etc. as required and matching finish the counters & interiors. The rate should be inculsive of painting with 2 coats of enamel paint. (The design should be got approved from the Bank before execution) Low height storage 750mm high 9.00 Page 2

3 4.2 Full height storage 2100mm high SIDE TABLE Supplying following sizes side tables made out of 19mm thick block board BWR grade with drawers, shelves, openable shutters with spring loaded hinges etc. All the exposed surfaces shall be pasted with 1 mm thick laminate of approved colour/ make. The inside/ inner surfaces shall be painted with 2 coats of enamel paint. The rate should inclusive of all necessary hardwares, locks, handles complete with polishing etc. (The design of the table should be got approved by the bank before commencement of work.) (The below given sizes may vary according to the site conditions. hence the contractor should confirm the size of table before supply and the variation in rate will be worked out in case of change in size) mm length mm length FALSE CEILING 6.1 Supplying and fixing totally flush made to shape false ceiling with gypsum board out of the following material including finishing with jointing compound,paper tape, one coat of primer two coats of approved quality and shade plastic emulsion paint as per approved samples complete including preparing the surface etc.12.5mm thick gypboard fixed to the metal frame as per the conditions. Ceiling channel (MF5) 80mmx26mmx0.5mm at every 457mm centre to centre. Intermediate channel (MF7) l5mmx45mmx0.9mm at every 1220 mm centre to centre. Perimeter channel (MF6A) 20mmx27m all along the wall. Strap hanger (MFB) on suspending the framework 25mmx0.5mm with nuts and bolts (P526) 6.4mmxl2.7mm Connecting clip (MF9) 2.63mm Dry wall screws 25mm long Dash fastener/rawlplug 12.5mm dia.x35mm long with 6mm dia.bolt. Soffit cleat 27mmx37mmx25mmx1.6mm thick All as per manufacturer's specifiction including all fixtures and fastenings complete Page 3

4 6.2 2'-0 X2'-0 Silhouette Grid False Ceiling:- Providing and fixing in true horizontal level false ceiling grid system of Armstrong World Industries/Insula/Daikin etc.. The suspension system shall be 2'-0 X2'-0 plain grid system with 15mm wide flanges main runners and cross tees to have mitred ends with birds mouth notches to provide mitred cruciform junctions. Main runners to be spaced at 4'-0 fixed by using 2mm pre-straightened GI wire. Main tee, rotary stitched of size 15mm x 44mm x 3600mm at every 4'-0 c/c maximum and 4'-0 cross tee of size 15mm x 44mm x 1200mm at every 2'-0 c/c maximum and 2'-0 cross tee of size 15mm x 44mm x 600mm at every 4'-0 c/c maximum and 19mm x 19mm x 3000mm wall angle alround the wall to form grid size of 2'-0 x 2'-0 and suspending the grid using 2mm pre-straightened GI wire and 6mm nylon rawl plug at every 4'-0 intervals at the main tee and laying of 15 mm thick mineral fiber tiles manufactured by Armstrong/Insula/Daikin etc. of size 2'- 0 X 2'-0 15mm over the formed grid etc., complete as directed. 7 TABLES Providing and making tables of following sizes with two drawers & one cabinet units made out of 19mm thick block board BWR grade of approved make (chemicaly treated). All the exposed surfaces shall be pasted with 1mm thick laminate of approved colour/ make. The inside/ inner surfaces shall be painted with 2 coats of enamel paint. The rate should inclusive of the cost of providing key board drawer with telescopic channel, all necessary edge beading/ moulding, foot rest,cpu stands sliding channels for drawers, hardwares, locks, handles complete with polishing etc. (The design of the table should be got approved by the bank before commencement of work.) 'x3' ' X 2' ' X 2' Page 4

5 8 WALL PAINTING 9 FLOOR SPRINGS 10 DOOR CLOSER 11 VERTICAL BLINDS 12 DISMANTLING WORKS 13 ALTERATION OF EXISTING CONFERENCE TABLE 14 DEMOLISHING OF CHUJJA 15 STEPS 16 Plastic emulsion paint : Cleaning the surface of the wall & applying two coats of wall putty followed by one coat of primer and applying a minimum of two coats of acrylic emulsion paint of Asian or equivalent make of approved shade to give neat uniform finish. Rate to included cost of all materials, labour, brushes, scaffolding etc. complete. Supplying & fixing heavy duty floor springs of approved make for doors as instructed by the Engineer. Supplying & fixing heavy duty door closers of approved make for doors as instructed by the Engineer. Supplying & fixing in position of vertical Blinds of "Vista" or "Touch". Dismantling existing false ceiling(approx.1000 s.ft.), wall panelling(approx.1000 s.ft.) etc. without damage to existing structures and shifting of debris as instructed by the Engineer. Alteration of existing conference table to required size as per instruction and necessary rectification of damaged patches with matching ply and laminates. Demolishing existing RCC chujja.removal of debris out of site.plastering and painting the affected area to be flush with the existing wall. Demolishing existing Kadappa steps and providing new wooden steps made out of 19mm thick plywood as per drawing. The exposed area maybe painted with 2 coats enamel paint. BUYBACK OF EXISTING TABLES,RUNNING TABLE,SIDE STORAGES (Tables 3nos.,Running Table-100 R.ft approx., Storage-approx.60s.ft) SUB-TOTAL DISCOUNT,IF ANY SERVICE TAX,IF ANY GRAND TOTAL Total in words only) Seal and signature of contractor Page 5