WOODWORKS Concealed. Ceiling Systems. Technical Guide

Transcription

1 Ceiling Systems Between us, ideas become reality WOODWORKS Concealed Ceiling Systems Technical Guide This booklet provides drawings, details, and specification information for WoodWorks Concealed ceilings. Key Selection Attributes Define a space with rich, natural FSC -certified wood FSC chain of custody (CoC) certified WoodWorks products represent responsible production and consumption practices from the forest to the consumer California Air Resources Board (CARB) compliant Mix and match three standard panel sizes on the same project Narrow 1/4" reveal visual Hook-on panels (for standard 15/16" suspension) provide safe and secure downward accessibility Create continuous looks and clouds with new 6" veneer-wrapped and painted aluminum trim available in six coordinating wood finishes and black Complete standard system from one manufacturer (grid/panels/trim) Shorter lead times and lower cost than custom millwork Factory edge banded for superior quality Five standard perforations available to enhance acoustical performance and design aesthetics In this Booklet (also found on armstrong.com/woodworks) Page 1 Attributes and Applications Page 2-3 Installation Details Page 4-5 2' x 4' Panel Layout Options Pages 6-7 2' x 6' Panel Layout Options Pages 8-9 2' x 8' Panel Layout Options Pages Multi-size Panel Layout Options Page Trim Installation Details Applications Healthcare Office Education Hospitality and retail

2 INSTALLATION DETAILS Step 1: Select Panel Size Pre-drilled holes for T-bar Hooks 2' x 4' Panel 2' x 6' Panel 2' x 8' Panel Step 2: Order T-bar Hooks Based on Panel Size T-bar Hook Panel Size Number of Hooks Needed Number of Screws Needed* 2' x 4' ' x 6' ' x 8' 8 24 *3 screws per hook 2

3 INSTALLATION DETAILS Step 3: Install Hooks on Panels Step 4: Install Panels A. B. C. 3

4 2' x 4' PANEL LAYOUT OPTIONS Basic Assembly Main Beam Detail View To create this design, you will need to order: Item Pieces 5983W1 2' x 4' Unperforated Panel T-Bar Hooks (4 per Panel) 48 (4 per Panel) HD Main Beams 6 2' Cross Tees 25 SH12 Support Hanger 3 4

5 2' x 4' SINGLE PANEL LAYOUT OPTIONS Staggered Pattern Assembly Unperforated Staggered Pattern Assembly W2 Perforation 5

6 2' x 6' PANEL LAYOUT OPTIONS Basic Assembly Detail View To create this design, you will need to order: Item Pieces 5984W1 2' x 6' Unperforated Panel T-Bar Hooks (4 per Panel) 48 (6 per Panel) HD Main Beams 6 2' Cross Tees 25 SH12 Support Hanger 3 6

7 2' x 6' SINGLE PANEL LAYOUT OPTIONS Staggered Pattern Assembly Unperforated Staggered Pattern Assembly W6 Perforation 7

8 2' x 8' PANEL LAYOUT OPTIONS Basic Assembly Detail View To create this design, you will need to order: Item Pieces 5985W1 2' x 8' Unperforated Panel T-Bar Hooks (4 per Panel) 64 (8 per Panel) HD Main Beams 8 2' Cross Tees 35 SH12 Support Hanger 6 8

9 2' x 8' SINGLE PANEL LAYOUT OPTIONS Staggered Pattern Assembly Unperforated Staggered Pattern Assembly W3 Perforation 9

10 MULTI-SIZE PANEL LAYOUT OPTIONS Staggered Pattern Assembly 2' x 4' and 2' x 6' Panels Unperforated Staggered Pattern Assembly 2' x 4' and 2' x 8' Panels Unperforated 10

11 MULTI-SIZE PANEL LAYOUT OPTIONS Staggered Pattern Assembly 2' x 6' and 2' x 8' Panels Unperforated 11

12 TRIM INSTALLATION DETAILS Step 1: Cut and Miter Trim Finished Standard Trim Length 120" FXTBC Location 4' Length Mitered on Both Ends 47-1/16" 47-13/16" 48-5/8" T-Bar Hook Flange Panel Flange Outside Edges of Miter 6" Flange that aligns T-Bar Hook Flange that aligns Panel Edge 6' Length Mitered on One End 6' Length Mitered on Both Ends 8' Length Mitered on Both Ends 71-9/16" 71-15/16" 72-3/8" 71-1/16" 71-13/16" 72-5/8" 95-1/16" 95-13/16" 96-5/8" Step 2: Attach Clips to Ends of Main Beams and Cross Tees Step 3: Attach Trim to Clips XL7301BL 12' HD Main Beam WW Concealed Trim FXTBC T-Bar Connector Clip FXTBC T-Bar Connector Clip 12

13 TRIM INSTALLATION DETAILS Step 4: Install Splice Plates FX4SPLICE Splice Plate Step 5: Install Panels WW Concealed Trim XL7301BL 12' HD Main Beam FXTBC T-Bar Connector Clip WW Concealed T-Bar Hook For a basic cloud assembly with 2' x 6' panels, you will need to order: Item Pieces 59841W1-2' x 6' Unperforated Panel T-Bar Hooks 36 HD Main Beams 6 2' Cross Tees 10 1' Cross Tees 4 SH12 Support Hanger 2 FXTBC T-Bar Connector Clips 16 FX4SPLICE Splice Plates W1 Trim 6 13

14 Ceiling Systems Between us, ideas become reality ARMSTRONG ( ) TechLine Technical information 8 a.m. to 5:30 p.m. EST Monday through Friday FAX or techline@armstrong.com armstrong.com/woodworks TechLine SM / ARmSTRONG armstrong.com/woodworks CS All trademarks used herein are the property of AWI Licensing Company and/or its affiliates 2011 AWI Licensing Company Printed in the United States of America