Introducing an innovation that will forever transform building and planning
|
|
- Marilynn Gertrude Randall
- 5 years ago
- Views:
Transcription
1 Introducing an innovation that will forever transform building and planning Sunvik READYFIX; a downstream automated cut and bend service, which provides customised solutions for all construction needs. With an endeavor to serve the infrastructure industry, READYFIX stands as an effort to simplify and strengthen hasslefree construction process.
2 Standard Shapes
3 How is made? BBS Entry Scheduling / Planning Cut and Bend Quality control check Tagging Delivery On-site Installation 07
4 How is better? ReadyFix is a testament to the high level of sophistication, precision and automation that can provide rst-grade cut-andbend services over and above the more conventional approach. Traditional Way Straight TMT bars are not customised to the size in which they are needed, leading to huge wastage on-site. Labor intensive activity. Possibility of theft and pilferage. Time Consuming, As Purchase planning require time ahead of construction. Space required on-site to accommodate and store the bars, increasing the risk of theft. Equipments required for processing. Cutting and bending is done manually, leaving the process susceptible to inef ciencies and inconsistent quality, Each bar would need to go through a strict quality check at every level. Even after that though, there is a margin for error. Depends on labor and availability of tools. Bars stay exposed to the elements, running the risk of being adversely affected by the weather. The rebar is manually measured, which can lead to inaccuracy. The cutting is not cleanly done, since it is done by hand, leading to questionable quality. Uncertain Consumption until completion of work. Dubious quality of TMT bar. No Accountability. Ready x Way Zero wastage since the cutting is done in-house. Less labor required so Less construction cost. No theft or pilferage. Quick delivery at the site. Better utilization of space, logistics and reduction of inventory on site. No equipments required. Mechanised processes that assured consistency in quality, and complete accuracy. The cutting and bending is done to the speci cations outlined by the client. Not depended on labor or tools so the work can be programmed to accelerate or slow down by just simply reprogramming the delivery schedule. Ready x is delivered to the site according to the work scheduled, thus not affected by the weather. Rebar is accurately measured using the computerised machines. Thus user gets perfectly shaped columns and beams with correct amount of cover concrete. Knowledge of steel used in every stage or any time from the rst day. Good quality. Accountability. SUNVIK READYFIX are made with accurate angles and lengths speci ed in BS 8666 / IS The 135 angle bend and 75 mm length cut helps the stirrups to hold on tightly with the straight rods in columns which inturn will give much more withstanding capacity to the structure in the events like earth quakes, which does not happen in traditional way mm
5 State-of-the-art Technology Ready x uses high-tech fully automated computerised machines from Italy, that cuts and bends steel with absolute precision. With the latest computer-controlled shear-line cutting machine, robotic double bender, single robotic benders and stirrup machinery, the company has the ability to cut and bend bars of diameters that range from 8 mm to 40 mm. Schnell produces stirrup benders, straightening machines and job site machines complying with the top-quality standards, which characterize Schnell European production. SCHNELL PRIMA+ 8 12m wire diameter, Automatic machines for construction of stirrups and shaped parts from coils, particularly suitable for medium production runs. SCHNELL SHEAR LINE mm diameter. Length tolerance + or- 2mm. SCHNELL BARWISER-22S 8-20 mm straight bars bending Manual Bender SCHNELL ROBOMASTER 45 Bending up to 40 mm wire diameter, allow fully automatic 4- directions bending and the production of any type of shapes, including those with positive and negative bends. Bending up to 40 mm diameter. Manual Cutters Cutting up to 32mm
6 REBAR SHOP
7 Sample BBS Bar Bending Schedule Conform To IS 2502 Screen Grab 1- Bend Shapes Screen Grab 2- Optimization Reports Screen Grab 3- Rebar Shop
8 Precision Tags BBS NO. MEMBER DESC BAR MARK ITEM NO DIA TL /CL QTY. WT. / KG. 01 COLUMN-C35 BASEMENT TO PLINTH LEVEL BUILDING-G / BBS NO. MEMBER DESC BAR MARK ITEM NO DIA TL /CL QTY. WT. / KG. 01 COLUMN-C35 BASEMENT TO PLINTH LEVEL BUILDING-G /
TIME TO FLIP FLIP STEEL ENERGY INFRASTRUCTURE FLYASH BRICKS & BLOCKS READYFIX TMT
TIME TO FLIP FLIP STEEL ENERGY INFRASTRUCTURE FLYASH BRICKS & BLOCKS READYFIX TMT WASTE HEAT RECOVERY POWER PLANT O U R M E N T O R Dr. C S Vishwanatha, one of the stalwarts in the eld of structural engineering
More informationINSTEEL WIRE PRODUCTS. Product Catalog
INSTEEL WIRE PRODUCTS Product Catalog Introduction Simplifying Concrete Construction Insteel Wire Products is one of the nation s largest manufacturers of steel wire reinforcing products for concrete construction
More informationINDEX. We collectively strive for excellence... and in doing so, set towering standards. About Union Rebar Factory From the Management...
INDEX About Union Rebar Factory... 1 From the Management... 3 We collectively strive for excellence... and in doing so, set towering standards. Vision & Mission... 4 Machine Specifications... 5 Product
More informationCutting and Bending Reinforcing Steel to Shape D/505/8166
Unit Title Ofqual unit reference number (code) Organisation Reference Unit Level Unit Sub Level Cutting and Bending Reinforcing Steel to Shape D/505/8166 8SF2 Two Unit Credit Value 20 None GLH 160 Sector
More informationRebar Bending & Processing Plant previously used by CE.CAR.FER s.n.c
Online Auction Sale Rebar Bending & Processing Plant previously used by CE.CAR.FER s.n.c In Association with; Bidding Ends: Wednesday 19th February 2014 at 2.00pm (UK Time) For Full Information & Viewing
More informationUnimaac Engineers. https://www.indiamart.com/unimaacengineers/
+91-8071806440 Unimaac Engineers https://www.indiamart.com/unimaacengineers/ We are a famous manufacturer of the wide assortment of Material Handling Equipment. These products are appreciated amongst our
More informationThe In-Sourced Steel Shop Evolving the Capability
The In-Sourced Steel Shop Evolving the Capability 1 / Agenda Considerations Geography Control Market Evolution Stages Drivers for Change Steelworks Drivers & Scope Building Design & Layout Equipment Transition
More informationWe are interested to share our knowledge, experience, and technology with your esteemed organization and become your partner for Rebar Technologies.
RGS CONSTRUCTION TECHNOLOGIES (PVT) LTD. New # 271(Old #182), Ankur Manor, Poonamalle High Road, Kilpauk, Chennai 600010. Phone No: +91 44 4285 9595 / +91 44 4285 9228, Fax: +91 22 6645 9590 Email: info@rgsrebar.com
More informationTERWA REBAR CONNECTION COUPLERS
TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger than the associated rebar, sometimes
More informationServo electric bending technology by Prima Power. The Bend The Combi The Laser The Punch The System The Software
Servo electric bending technology by Prima Power The Bend The Combi The Laser The Punch The System The Software Servo electric ep-1030 press brake Prima Power has been a true pioneer in applying servo
More informationAUTOMATION. Mesh, Rebar and Precast Industry ENGLISH
AUTOMATION Mesh, Rebar and Precast Industry ENGLISH The Company Engineering Production Software Innovative from Experience Our Efforts Your Benefits We have been developing machinery and plants for rebar
More informationModule 4 Waterside Bensalem, Pa Date
Date 2-12-16 WATERSIDE CONSTRUCTION, L.P. Building to be fully sprinklered per NFPA13R General Notes GN-1 General Notes DIAGRAMMATIC STAIR DETAIL GN-2 General Notes ¾" - GN-3 General Notes (R301.2.2.4
More informationwww.gulfsteeluae.com MANUFACTURING QUALITY STEEL SINCE 1992 CONTENT About Us 2 Facilities & Products 4 Manufacturing Process 6 Product Specifications 8 Quality Assurance Plan 10 Physical & Chemical Testing
More informationSave money by reducing reinforcement scrap
R EINFORCEMENT S TEEL S OFTWARE Save money by reducing reinforcement scrap Contact us today: asa India +91.9870284190 irfan@asahq.com U.S. Headquarters +1.724.733.8700 websales@asahq.com Save money by
More informationModule 4 Waterside Bensalem, Pa Date
Date 8-8-16 WATERSIDE CONSTRUCTION, L.P. Building to be fully sprinklered per NFPA13D General Notes GN-1 General Notes DIAGRAMMATIC STAIR DETAIL GN-2 General Notes ¾" - GN-3 General Notes (R301.2.2.4 &
More informationTERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B www.euroacc.co.uk Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger
More informationNTPEP. Mill: Name: Physical Address: Mailing Address: SAME AS ABOVE (if different from above) Primary Contact Name: Title: Telephone: Cell:
Mill: Name: Physical Address: Mailing Address: SAME AS ABOVE (if different from above) Primary Contact Name: Title: Telephone: Cell: Email: Management QC Manager: Plant Manager: Auditor Contact Name: Telephone:
More informationAlgorithms for Reducing the Waste Rate of Reinforcement Bars
Algorithms for Reducing the Waste Rate of Reinforcement Bars * 1, Won-Kee Hong 2 and Jin-Kyu Joo 3 1 Associate Professor, College of Architectural and Civil Engineering, Kyung Hee University, Korea 2 Assistant
More informationLintel Tables Design Notes and Limitations
LINTEL TABLES Lintel Tables Design Notes and Limitations 1. These tables apply to one and two family residential structures only that conform to the requirements of the 2006, 2009 or 2012 International
More informationPreliminary design of concrete structures 124SDP1
124SDP1 1 Content 1 Content...- 1-2 Preliminary design...- 2-2.1 Reinforced concrete slab...- 2-2.2 Reinforced concrete beam...- 3-2.3 Reinforced concrete column...- 4 - Department of Concrete and Masonry
More information10. Calculation of the quantity of Rebar material
10. Calculation of the quantity of Rebar material 1) Extra of rebar In case of deformed bar, extra is 3% in general when including fixed & splice length of rebar, however, it is proportional to bar size.
More informationKRB 1058 Cool Creek Road Wrightsville, PA USA p: f:
KRB 1058 Cool Creek Road Wrightsville, PA 17368 USA p: 717 252 3667 f: 717 252 9247 www.krbmachinery.com info@krbmachinery.com KRB is a leader in building rugged, cost effective, high-output rebar fabrication
More informationRCDC V6.0. Release Notes
Release Notes RCDC V6 is here with numerous new features delivering greater accuracy and flexibility to the design, detailing, drawing and reporting experience. The new features introduced are: No Module
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More informationCHAPTER 11 Bar Cutoff
page 188 CHAPTER 11 11.1. Anchorage of Tension Bars by Hooks In the event that the desired tensile stress in a bar cannot be developed by bond alone, it is necessary to provide special anchorage at the
More informationCARES Technical Approval Report TA1-B&C 5039
CARES Technical Approval Report TA1-B&C 5039 Issue 3 Armaturis Herisson Plus Standard and Positional Couplers Assessment of the Armaturis Herisson Plus Standard and Positional Couplers Product and Quality
More informationHANDSET WALL FORM. Handset Wall Form. Quick Assembly - can be built using only a hammer. Reduced weight increases productivity
HANDSET WALL FORM Quick Assembly - can be built using only a hammer Reduced weight increases productivity Unsurpassed flexibility in design and availability of panels for a wide variety of applications
More informationROLLING INTO THE FUTURE, LONG ROLLING CONTROL SYSTEM UTILIZING THE CHANGING TRENDS IN TECHNOLOGY AND DIGITALIZATION *
255 ROLLING INTO THE FUTURE, LONG ROLLING CONTROL SYSTEM UTILIZING THE CHANGING TRENDS IN TECHNOLOGY AND DIGITALIZATION * Paul Riches 1 Abstract Today s steel producers face the dual challenge of ensuring
More informationKNIVES. giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING
KNIVES giving you the EDGE, to stay AHEAD. TUBE & METAL FORMING ATLAS has comprehensive in-house designing facility to design new products according to customer s specific requirements with complete satisfaction
More informationUnited Nations Development Programme-South Sudan
United Nations Development ProgrammeSouth Sudan PRICED BILLS OF QUANTITIES FOR CONSTRUCTION OF TORIT PRISON PERIMETER SECURITY FENCING Main Summary Currency Item No. 1 Preliminaries Item No. 2 Excavations
More informationLatest technologies and mill solutions for the production of long products ULRICH SVEJKOVSKY *
Latest technologies and mill solutions for the production of long products BY ULRICH SVEJKOVSKY * SYNOPSIS: Steel products, especially long products like rebars, wire rod and sections are important construction
More informationPre-Audit Application Form
Please provide the following information and return responses to AASHTO. Provide all applicable supporting documentation requested. Mill Name: Physical Address: Mailing Address: (if different from above)
More informationSMART REINFORCING BETTER FASTER CHEAPER
SMART REINFORCING BETTER FASTER CHEAPER MITA (P) 269/06/2003 June 2016 foreword Prefabrication Takes Flight Traditionally, welded wire mesh for slabs and walls can be used to fast track the steel fixing
More informationThe Art of Construction and The Design. Direct, rebar chair.
The Art of Construction and The Design Direct, rebar chair. Prefabricated element, made out of a thin steel rebar with plastic tipped legs in order to prevent corrosion of the support area between the
More informationTECHNICAL SPECIFICATION OF MS TOR BARS FOR TRANSMISSION LINES
GUJARAT ENERGY TRANSMISSION CORPORATION LTD. Sardar Patel Vidyut Bhavan, Race Course, Vadodara: 390 007 TECHNICAL SPECIFICATION OF MS TOR BARS FOR TRANSMISSION LINES GETCO/E/TS-MS024/R2 DT08-02-2012 TECHNICAL
More informationKnight Group Processing
Helping manufacturers across the globe achieve sustainable leaner manufacturing processes Knight Group Processing Ultrafine Width Tolerances down to +/- 0.025mm (0.001 ) Low Width Thickness Ratio 3:1 unique
More informationP2Xe: compact hybrid panel bender. Perfect balance between space and consumption, productivity and flexibility. Within everybody s reach.
P2Xe: compact hybrid panel bender. Perfect balance between space and consumption, productivity and flexibility. Within everybody s reach. P2Xe: Perfect balance between space and consumption, productivity
More informationGLOBAL ORGANIZATION - LOCAL SUPPORT VMI MAXX SYSTEMS RADIAL PASSENGER TIRE BUILDING SYSTEMS
GLOBAL ORGANIZATION - LOCAL SUPPORT SYSTEMS RADIAL PASSENGER TIRE BUILDING SYSTEMS SHAPING TECHNOLOGY VMI is committed to supplying customengineered systems to the rubber and tire industry. This includes
More informationProcess Strategy and Sustainability
7 Process Strategy and Sustainability PowerPoint presentation to accompany Heizer and Render Operations Management, 10e Principles of Operations Management, 8e PowerPoint slides by Jeff Heyl 7-1 Process
More informationSS TIGER 500W, a product of SS Steel is the new generation high strength ribbed reinforcement bar. It is different from ordinary bars in its method
: www.sssteel.biz : www.facebook.com/sssteelbd 01 Looking ahead Bangladesh is a developing country and widely known as an EMERGING TIGER. The Vision 21 aims at Bangladesh becoming a middle-income country
More informationMATERIAL SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1440 NOVEMBER 2004 MATERIAL SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE TABLE OF CONTENTS 1440.01 SCOPE 1440.02 REFERENCES 1440.03 DEFINITIONS
More informationR-Group Finland Oy. RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 16.8.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
More informationQuestions with Solution
Questions with Solution Q 1. Vus/d depends on a) Asv b) spacing of shear reinforcement c) grade of steel d) all of these. Refer Cl. 40.4 (a), pg. 73 IS 456:2000 V us = 0.87 f y A sv d s v 1. (d) all of
More informationRED T H E L I T T L E STEEL AND REINFORCING PRODUCTS FOR THE CONSTRUCTION INDUSTRY
T H E L I T T L E RED BOOK STEEL AND REINFORCING PRODUCTS FOR THE CONSTRUCTION INDUSTRY 01227 863770 sales@buildersbeams.co.uk INTRODUCTION Welcome to The Little Red Book from Builders Beams; your go-to
More informationConfined masonry. An illustrated guide for masons. This manual explains this technique. Confined masonry. RC frames. Columns first, walls after
S D C Confined masonry An illustrated guide for masons This manual explains this technique RC frames Columns first, walls after Confined masonry Walls first, columns after 1. Site selection and form of
More informationCast-in-Place Concrete Industry
Cast-in-Place Concrete Industry Adoption of Information Technology Chang-sun Chin Contents 1. Existing processes and business environment. 2. Available and suitable information technologies. 3. A framework
More informationQATAR STEEL TUBE & PIPE CATALOGUE INDUSTRIES FACTORY (W.L.L) qatarsteelfactory.com
TUBE & PIPE CATALOGUE qatarsteelfactory.com INTRODUCTION Since 1980 Qatar Steel Industries Factory has become the leading steel manufacturer in its region and a great factor in Qatar s economic growth,
More informationFor over 25 years, KRB has been a leader in rebar fabrication equipment and material handling systems around the world.
For over 25 years, KRB has been a leader in rebar fabrication equipment and material handling systems around the world. KRB designs and manufactures complete rebar cutting, rebar bending and rebar material
More informationVALUE-MINDED MACHINES & TECHNOLOGY INDUSTRY LEADING SUPPORT.
S VALUE-MINDED MACHINES & TECHNOLOGY INDUSTRY LEADING SUPPORT. NewCNC is a leader in America s manufacturing technology revolution. Our machines incorporate leading-edge technology and world-class service
More informationADAPT-Builder Express (EX) v3. Summary of New Features
ADAPT-Builder Express (EX) v3 Summary of New Features Structural Concrete Design Suite including: ADAPT-Modeler ADAPT-Floor Pro ADAPT-MAT ADAPT-SOG March 2007 1 2007 ADAPT Corporation All rights reserved
More informationSECTION STRUCTURAL METAL FRAMING
SECTION 05100 STRUCTURAL METAL FRAMING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Structural steel framing including lintels, shelf angles, bearing plates, anchor bolts and other items as shown on
More informationMicro-Precision Coil and Formed Wire Products for the Medical Device Industry
Micro-Precision Coil and Formed Wire Products for the Medical Device Industry Precision Metal Components For Medical Devices Specialized, complex parts and sub-assemblies Extreme diameter and length capabilities
More informationDrainage, Road Drainage and Collection Pit A - EXCAVATION:
57 Drainage, Road Drainage and Collection Pit SCHEDULE OF QUANTITY Sl.N o. 1 Particulars Qty Unit Rate Amount A - EXCAVATION: Earth work in EXCAVATION IN FOUNDATION TRENCHES IN ALL KIND OF SOIL including
More informationBala Krishna Shrestha Chairman
Here at Hamasteel, we believe that success comes from having patience, perseverance and the passion for the things that we do. It has been a long journey from the confines of a small trading shop to what
More informationSheet metal working solutions for Factories 4.0
Sheet metal working solutions for Factories 4.0 FMS S4 + P4 The highly efficient sheet metal processing system. The S4+P4 line punches, shears and bends sheet metal totally automatically, without any intermediate
More information> ONCE UPON A TIME THERE WAS A LITTLE STEEL COMPANY THAT DARED TO EVOLVE
> ONCE UPON A TIME THERE WAS A LITTLE STEEL COMPANY THAT DARED TO EVOLVE Integrated it s processes Gathered strenghts Believed in institucional framework NOW FACES A NEW CHALLENGE ECELLENCE GRUPO ACERERO
More informationANODE BARS CATHODE BARS ANODE YOKES
ANODE BARS CATHODE BARS ANODE YOKES For the Primary Aluminium Smelters Norsk Hydro 2 Complete solutions for the industrial world WHO WE ARE HMR Group consists of nine companies, located strategically along
More informationAbanti Color Tex Ltd. Plot-S, A-646, Shashongaon Enayetnager, Fatullah, Narayangonj ( E, N) 28 June 2014
1 Abanti Color Tex Ltd. Plot-S, A-646, Shashongaon Enayetnager, Fatullah, Narayangonj (90.476444E, 23.622806N) 28 June 2014 2 Preliminary calculations suggest columns in Units 1 and 2 are highly stressed
More informationBrent Ellmann Structural Option 200 Minuteman Park, Andover, MA Structural Consultant: Dr. Hanagan
Structural Design: Goals: The original design of 200 Minuteman Drive was dictated largely by Brickstone Properties, the building s owner. The new design of 200 Minuteman Drive, with additional floors,
More informationSection 02. Who Can Benefit From ERP?
Section 02 Who Can Benefit From ERP? Who Can Benefit From ERP? Becoming More Efficient If you see companies in your industry outpacing their peers, the secret is likely to be the implementation of an ERP
More informationTECHNICAL MANUAL. SUMO Wall Shoe. For Bolted Wall Connections
TECHNICAL MANUAL Wall Shoe For Bolted Wall Connections Version: PEIKKO GROUP 11/2014 Wall Shoe For bolted wall connections System benefits Strong tensile connection: enables shear walls to be built of
More informationThe Bend The Combi The Laser The Punch The System The Software. Shear Brilliance outstanding productivity
The Bend The Combi The Laser The Punch The System The Software Shear Brilliance outstanding productivity Shear Brilliance outstanding productivity The integrated punching-shearing concept has been championed
More informationSUMO Wall Shoe. For bolted wall connections. Technical Manual. Version: Canada and United States 08/2016
Wall Shoe For bolted wall connections Version: Canada and United States 08/2016 Technical Manual Wall Shoe For bolted wall connections Strong tensile connection: enables shear walls to be built of precast
More informationTECHNICALFEATURES 1/2 Design with 3D software A GLOBAL PERSPECTIVE TO BRING YOU STATE-OF-THE-ART TECHNOLOGY Our R&D Department at D&G Machinery keeps abreast of the latest technology and trend from around
More informationPRESTRESSED STEEL WIRE
Your reliable partner APPLICATIONS BS 5896 Certificate No. CL12020163 Prestressed panels ASTM A Certificate No. CL12020162 Railway sleepers CONTENTS - COMPAGNY PROFILE...02 - MAKLADA GOES GREEN...02 -
More informationFLEXTRAY - Installation
FLX-49 Exclusive, patented CLEANSHEAR cuts tray fast No sharp edges Designed specifically for cutting Flextray Safely cut and bend Flextray into any configuration Flextray Cutters Part Qty./Box Wt./Box
More informationDevelopment Length, Lap Splices and curtailment of reinforcement
Lecture 05 Development Length, Lap Splices and curtailment of reinforcement By: Prof Dr. Qaisar Ali Civil Engineering Department UET Peshawar drqaisarali@uetpeshawar.edu.pk 1 Topics Addressed Development
More informationCHAPTER 16 - GANTRIES
CHAPTER 16 - GANTRIES DS Temple 16.1 SCOPE This section covers the inspection of Sign Gantries as specified in the applicable chapter of the Specifications. It also covers the special attention which must
More informationBridge Beams/Girders
Bridge Beams/Girders Introduction Simplifying Concrete Construction Insteel Wire Products is the nation s largest manufacturer of steel wire reinforcing products for concrete construction applications.
More informationBUILDING BRIDGES TO THE FUTURE
BUILDING BRIDGES TO THE FUTURE MILESTONES July, 2004: Commissioned 1st DRI Kiln having annual manufacturing capacity of 30,000 MT of sponge iron December, 2005: Commissioned 2nd DRI Kiln and enhancing
More informationMATERIAL SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 1440 NOVEMBER 2014 MATERIAL SPECIFICATION FOR STEEL REINFORCEMENT FOR CONCRETE TABLE OF CONTENTS 1440.01 SCOPE 1440.02 REFERENCES 1440.03 DEFINITIONS
More informationThe 4th Asia IT Construction Roundtable 2008
The 4th Asia IT Construction Roundtable 2008 National Institute for Land and Infrastructure Management Ministry of Land, Infrastructure, Transport and Tourism Research Center for Advanced Information Technology
More informationSECTION LIGHTNING PROTECTION SYSTEM
SECTION 16670 - LIGHTNING PROTECTION SYSTEM PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. General: Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationReinforced Concrete Design. A Fundamental Approach - Fifth Edition
CHAPTER REINFORCED CONCRETE Reinforced Concrete Design A Fundamental Approach - Fifth Edition Fifth Edition REINFORCED CONCRETE A. J. Clark School of Engineering Department of Civil and Environmental Engineering
More informationBystronic: Best choice.
BENDING 4 BENDING Bending Bending is a procedure for forming a flat, sheet metal workpiece. It immediately follows cutting in the processing chain. The workpiece lies on a bottom tool with a v-shaped
More informationCURRICULUM FOR STEEL FIXER
CURRICULUM FOR STEEL FIXER 6-MONTHS (Certificate course) National Vocational & Technical Training Commission, Islamabad (February, 20) CONTENTS Training Objectives... 3 Curriculum Salient Points... 3 Skill
More informationSimply better, right from the start.
Simply better, right from the start. Our panel dividing saws SAWTEQ B-130 YOUR SOLUTION 02 Contents Contents 03 The SAWTEQ B-130 panel dividing saw precision at an unrivaled price The smallest HOMAG panel
More informationMargin Erosion: Process Improvements to Help Close the Gap and Deliver a Profitable Project
White Paper Margin Erosion: Process Improvements to Help Close the Gap and Deliver a Profitable Project In the current economic climate, professional service firms are acutely aware of the threat posed
More informationEstimate FOR THE SEPTIC TANK
Estimate FOR THE SEPTIC TANK S.NO ITEM DESCRIPTION. 1 Excavation in soil,soft & hard murum... Qty UNIT Rate Excavation for footing, machine foundation, plinth beams, wall footing, gutters,brick wall, tanks
More information2016 DESIGN AND DRAWING OF REINFORCED CONCRETE STRUCTURES
R13 SET - 1 DESIGN AND DRAWING OF REINFCED CONCRETE STRUCTURES 1 Design a simply supported rectangular beam to carry 30kN/m superimposed load over a span of 6m on 460mm wide supports. Use M20 grade concrete
More informationHOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST
HOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST 2 3 WEAR RESISTANT FLEXIBLE INDUSTRIAL TRANSPORT VEINS Pipes and hoses are the transport veins for industrial processes. Often special solutions
More informationTHE COMPANY. Group Companies. Shivam Meltech Pvt. Ltd. Shivam Coke Pvt. Ltd. Shivam Nirman Pvt. Ltd.
Started its journey in the year 199 as Shivam Coke Pvt. Ltd. (SCPL) to process raw Coal into Low Ash Metallurgical Coke (LAM Coke). SCPL had installed a Coal Benefication Plant (Coal Washery) to cater
More informationModal-spectral analysis of a gas storage tank.
Modal-spectral analysis of a gas storage tank. Description of the structure: A Spherical tank gas storage is formed by: 1.- S-355 steel sphere plate elements of 1.5 cm thickness. 2.- Eight vertical posts
More informationStainless Steel: EN Standards for Stainless Steel Bar
The old BS970 Parts 1 & 3: 1991 standards have been replaced by a number of EN Standards, the most important of which are shown below EN10088-3Replaces BS970 Part 1: 1991 & BS970 Part 3: 1991 covering
More informationAdvanced High Precision of Bar Inspection and Conditioning
UDC 669. 14-426 : 658. 562 Advanced High Precision of Bar Inspection and Conditioning Taira ONO* 1 Osamu OOYAMA* 2 Abstract Special steel bars are worked secondly and thirdly by customers, and used in
More informationSucker Rod Pump. Manufacturing and service
Sucker Rod Pump Manufacturing and service Committed to Excellence Our manufacturing facility is more than 140,000 ft 2, and with inventory and field sales support in strategic locations, we are ready to
More informationNEW ROLLING STANDS FOR LONG PRODUCTS ROLLING MILLS*
NEW ROLLING STANDS FOR LONG PRODUCTS ROLLING MILLS* Matteo Tomba 1 Massimiliano Zuccato 2 Andrea Fontanini 3 Nicola Tomba 4 Abstract Today s steel market is characterised by high competitiveness and tight
More informationWire Machinery for the Challenges of Tomorrow. Cold-rolling and stretching lines.
Wire Machinery for the Challenges of Tomorrow www.koch-ihmert.de Future technology for the wire industry Wire for tomorrow s world Markets are in movement. They demand new technologies that are as flexible
More informationThe tech race and IoT How technology can sharpen your competitive edge MANUFACTURING TRANSPORTATION SUPPLY CHAIN
The tech race and IoT How technology can sharpen your competitive edge MANUFACTURING TRANSPORTATION SUPPLY CHAIN THE RESEARCH IS IN AND IT S TIME TO GO BIG. Join the tech race with the Internet of Things
More information65 mm 2 mm 65 mm D6 SD295A D6 SUS34 D13 SD39 SD39 15mm mm Series 1: Stirrup Series 2 : Main rebar 45 a = 45 mm SUS34 D25 SD39 2 mm mm 2
コンクリート工学年次論文集,Vol.36,No.1,214 MECHANICAL CHARACTERISTICS OF RC BEAMS WITH CORRODED STIRRUPS OR MAIN REINFORCEMENTS -Technical Paper- Visal ITH *1, Koji MATSUMOTO *2 and Junichiro NIWA *3 ABSTRACT This
More informationPRECISION MEASURING UNIT FOR THE SHOP FLOOR
PRECISION MEASURING UNIT FOR THE SHOP FLOOR APPLICATIONS HIGH PRECISION GAUGING IN THE PRODUCTION PROCESS 3 CAM SHAFTS 3 CRANK SHAFTS 3 GEAR SHAFTS 3 DRIVE SHAFTS TYPICAL MEASURING TASKS Dimensional, position,
More informationSCIENTIFIC APPROACH TO PIPE STORAGE IN THE OIL AND GAS INDUSTRY
SCIENTIFIC APPROACH TO PIPE STORAGE IN THE OIL AND GAS INDUSTRY Table of Contents 1 Introduction 2 Necessity for scientific design 3 Dynamics of pipe storage 4 Storage systems suitable for pipes 5 Conclusion
More informationPRE-CAST HOUSE CONSTRUCTION
PRE-CAST HOUSE CONSTRUCTION BDA is a Planning and Development Authority Jurisdictional Area is 1370 sq.km. Developed 64 Layouts Distributed 1,40,000 of sites Developed Infrastructure Works like Ring Roads
More informationSolutions in Steel Innovative Technologies for Smart Solutions
Solutions in Steel Innovative Technologies for Smart Solutions Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established
More informationENGINEERING IS OUR BUSINESS. Engineering. Manufacturing. System Integration. HBL Power Systems Limited, India
ENGINEERING IS OUR BUSINESS Engineering. Manufacturing. System Integration HBL Power Systems Limited, India Precast Concrete Products About Us is Company serving in Power domain since 1977 and fundamentally
More informationTAPER THREADED GRIP-TWIST
TAPER THREADED GRIP-TWIST And Position Couplers MECHANICAL SPLICES FOR REINFORCED CONCRETE CONSTRUCTION PROJECTS Technical Data and Performance Review JULY 2003 BarSplice Products, Inc., 4900 Webster Street,
More informationExperts in Custom Medical Stampings
Experts in Custom Medical Stampings Moving medical products to market Kenmode brings decades of experience to the development of innovative metal stampings for the medical device industry, with a commitment
More informationIntroducing the most Technologically Advanced Structural Steel Processing Plant in Europe. www.directfromdock.co.uk www.parkersteel.co.uk 0844 37 37577 The Most Advanced Fully Automated Processing Centre
More informationAutomatic Entrance Specialists
Automatic sliding door for pedestrian entrances and industrial application Automatic Entrance Specialists SPACE Automatic Door Series - for light/medium/heavy applications Why use an automatic door? The
More information