EXPERT IN REACTIVE THERMOPLASTIC PULTRUSION
|
|
- Nelson Barker
- 5 years ago
- Views:
Transcription
1 EXPERT IN REACTIVE THERMOPLASTIC PULTRUSION 24/02/2015 1
2 Company Core Business and competences Reactive Thermoplastic Pultrusion Technologies Advantages of Thermoplastic Composites Applications 24/02/2015 2
3 Company CQFD Composites, facts Founded in 2006 R&D process development since 2007 Commercial approach initiated in 2010 Team of 8 persons R&D work place of 800 m2 4 advanced pultrusion lines dedicated to R&D pultrusion work Based in Wittenheim (France) - 20 mm from Bâle-Mulhouse airport 24/02/2015 3
4 Core Business CQFD Composites, Core Business: Development of innovative composite thermoplastic profiles Industrialization of products and processes. Production Technologies transfer CQFD Composites, competences: Development of composites profiles Expertise in thermoplastic composites Design of pultrusion tools and machineries Polymer chemistry and interface R&D project management 24/02/2015 4
5 Technologies Reactive Thermoplastic Pultrusion Step1 Proprietary formulation of low viscosity monomers combining catalyst, activator, additives and suitable fibers are introduced under pressure into to a pultrusion die. Step 2 The thermoplastic polymer is synthetized «in situ» among the fibers during the shaping step of the profile, under pressure and heat. 24/02/2015 5
6 Key advantages KEY ADVANTAGES OF PULTRUDED THERMOPLASTIC COMPOSITES PRODUCT PROCESS ENVIRONMENT TIME TO MARKET ULTIMATE MECHANICS SHAPABLE PROFILES COMPATIBLE FOR OVERMOULDING LOW COST RAW MATERIALS ONE STEP TRANSFORMATION STRAIGHT OR CURVED 2,5 x LESS ENERGY CONSUMPTION RECLYCLABLE STYRENE FREE MATURE TECHNOLOGY AVAILABLE FOR MASS PRODUCTION AVAILABLE FOR TECHNOLOGY TRANSFER STRAIGHT SHAPED CURVED 24/02/2015
7 Never-achieved fiber content 85 %w fibers! 24/02/2015 7
8 High adhesion quality w w Traditional Thermoset composite profile CQFD Thermoplastic composite profiles SEM pictures obtained on composite profiles after breaking 24/02/2015 8
9 Optimized cost Reduction of composite transformation steps Monomers Polymers Filament, Granules, Powder Composite Actual techniques CQFD 24/02/2015 9
10 Competitive process Raw materials Lower cost first transformation matrix tex Lower cost large tow fibers 4800 Monomer Olygomer Transformation Low pressure Low temperature On line chemistry Multi cavities die 24/02/
11 Targeted applications E Gpa 85 % fibers THICK structural profiles INSERTS reinforcements (extrusion & injection) ULTRA HIGH MODULUS PRECISE profiles (connexion / assembly) COMBINAISON of fibers for mechanical /cost optimisation CO_EXTRUDED profiles (surface functionalities /welding) 24/02/
12 Key markets Automobile Construction Structural and semi structural parts Windows, and others structural profiles 24/02/
13 Automotive : ULTIMATE MECHANICS From DESIGN. to REALITY 24/02/
14 Building: ULTIMATE WEATHER Alternative to aluminum in building applications ALU CQFD UD GLASS Density 2,7 2,0 Rigidity Gpa Gpa Resistance Mpa Spe. Rigidity Conductivity 220 0,5 W/m.K Dilatation m/m.k 24/02/
15 Partnership CQFD composites commits to his customers to : Think about a performing innovative product solution Identify the most efficient process Propose an industrial scenario in line with the customer expectations : Production by CQFD Composites Joint-Venture Technology/Know-How transfer to the customer 24/02/
16 Pultrusion Technologies Pultruded Thermoplastic Composites Solutions Material Engineering 24/02/ Thank you for your attention Frank Chauzu Managing Director 2, rue du Maine Wittenheim Tel.: f.chauzu@cqfd-composites.com
Vacuum infused thermoplastic composites for wind turbine blades
Vacuum infused thermoplastic composites for wind turbine blades 28-10-2009 Julie Teuwen, Design and Production of Composites Structures Delft University of Technology Challenge the future Introduction
More informationIN-SITU-PULTRUSION STRUCTURAL THERMOPLASTIC FRP-PARTS
IN-SITU-PULTRUSION STRUCTURAL THERMOPLASTIC FRP-PARTS Stefan Epple, Institut für Kunststofftechnik, University of Stuttgart, Germany Christian Bonten, Institut für Kunststofftechnik, University of Stuttgart,
More informationMethods of Making 3-Dimensional Shaped Composite Structures
Methods of Making 3-Dimensional Shaped Composite Structures Parvinder Walia, George Klumb, Jason Reese, Jack Hetzner, Dave Bank, and Keith Kauffmann The Dow Chemical Company, Midland, MI 48667 Abstract
More informationThermoplastic composites: Tomorrow is only a day away
Thermoplastic composites: Tomorrow is only a day away Sirris/SLC-Lab Linde De Vriese, Project engineer Thermoplastic composites: tomorrow or today? Impact Bumper (Audi AG, Krauss Maffei) Samsonite Bond
More informationn g n d i B e h e Impossible, They Said. We Bent the Rules. 1 *Trademark of FULCRUM Composites Inc.
B e n d i n g t h e Impossible, They Said. It s the combination of materials, properties, and performance that plastics manufacturers and suppliers have been trying to perfect for years: the high strength
More informationCHAPTER - 1 INTRODUCTION
CHAPTER - 1 INTRODUCTION 1. 1.1 Polymer Matrix Composites Composite materials are formed by combining two or more materials that have different properties. The constituent materials work together to give
More informationHigh Speed RTM Materials and Processing Technology Advancements for Affordable Lightweight Composites
High Speed RTM Materials and Processing Technology Advancements for Affordable Lightweight Composites Allan James, Rainer Koeniger, Ali Siddiqui, Dave Bank, Hein Koelman, Peter Cate SPE ACCE Composites
More informationComposite Solutions for the Automotive Industry
Composite Solutions for the Automotive Industry 2 COMPOSITE SOLUTIONS FOR THE AUTOMOTIVE INDUSTRY Reduce weight. Reduce costs. Increase quality. Henkel offers composite solutions for the automotive industry.
More informationPROCESSING OF CONTINUOUS FIBRE REINFORCED THERMOPLASTICS
PROCESSING OF CONTINUOUS FIBRE REINFORCED THERMOPLASTICS J. P. Nunes 1*, J. F. Silva 1,2, A. T. Marques 3 1 Institute for Polymers and Composites/I3N, Minho University, Campus de Azurem, 4800-058 Guimaraes,
More informationBreaking the limits of bioplastics using degradable glass fiber as reinforcement Arctic Biomaterials Oy Tomi Kangas, Sales Director
Breaking the limits of bioplastics using degradable glass fiber as reinforcement 6.2.2019 Arctic Biomaterials Oy Tomi Kangas, Sales Director GENERAL COMPANY INFO Founded 2014 35 professional persons and
More informationOverview of composite manufacturing technologies
Composite technology BMEGEPT AGE1 Overview of composite manufacturing technologies Gergely Czél Spring 2018 Composites- Structure Lamina, ply, layer Matrix Fibre Interface Laminate Stacking/lay-up sequence
More informationElium Liquid thermoplastics. Room temperature cure Very high stiffness Ductile composites
Elium Liquid thermoplastics Room temperature cure Very high stiffness Ductile composites Unique Technology Proven Results An Exciting Future Liquid thermoplastic composite resin Easy to process with existing
More informationSupplement. by WING SIEN FONG. October A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA
Report No. 51A REINFORCED PLASTICS Supplement A by WING SIEN FONG October 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION........................
More informationContinuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications
Continuous Fiber Reinforced Thermoplastic (CFRT ) Inserts for Injection Over-Molding in Structural Applications Thomas Smith, President TenCate Performance Composites Kipp Grumm, PE Advanced Development
More informationSPECIAL: PU Elastomers (cast, spray, TPUs)
September 2017 English EUROPEAN POLYURETHANE JOURNAL SPECIAL: PU Elastomers (cast, spray, TPUs) in German in Russian KP VERLAG ISSN 1867-3503 FACHMAGAZIN FÜR DIE POLYURETHANINDUSTRIE Technical Articles
More informationCoathylene Polymer Powders
Enhanced processing efficiency of Glass fiber reinforced plastics Improved dimensional stability Improved surface finish and appearance Anti-Shrink additive for low profile Coathylene fine powders are
More informationPushing boundaries in pultrusion with Polyurethane
Pushing boundaries in pultrusion with Polyurethane Benedikt Kilian COVESTRO-PUR-R&D covestro.com Competence Day Pultrusion 1 Pultrusion is a manufacturing process for the continuous production of fiber
More informationMandatory Checkpoints for a Higher Composite Market Share in Automotive / 03 / 2017
Mandatory Checkpoints for a Higher Composite Market Share in Automotive guillaume.chambon@faurecia.comrld - 15 / 03 / 2017 Agenda 1 Faurecia Composite Technologies 2 Where do composites stand? 3 Acting
More informationAutomotive: Applications, Processes and products -- Fiberglass for PA Reinforcement. Dr. Heinz Zhang. Product R&D Center
Automotive: Applications, Processes and products -- Fiberglass for PA Reinforcement Dr. Heinz Zhang Product R&D Center Overview 1 Fiberglass Reinforced Thermoplastic Composites 2 PA & Fiberglass Reinforced
More informationExpanding the Performance Envelope for Long Fiber Thermoplastic Composites with Unidirectional Tape Inserts
Expanding the Performance Envelope for Long Fiber Thermoplastic Composites with Unidirectional Tape Inserts White Paper Innovation Made to Order PlastiComp, Inc. 110 Galewski Drive Winona, Minnesota, U.S.A.
More informationNews Release. BASF at the JEC in Paris: Competence in Composites
News Release BASF at the JEC in Paris: Competence in Composites Automotive lightweighting: Polyurethane in the BMW i3 and reactive polyamide materials development Wind power: New materials for various
More informationStress-Strain Behavior
15-1 CHAPTER 15 CHARACTERISTICS, APPLICATIONS, AND PROCESSING OF POLYMERS PROBLEM SOLUTIONS Stress-Strain Behavior which is 15.1 From Figure 15.3, the elastic modulus is the slope in the elastic linear
More informationDevelopments in Recycled Carbon Fiber for High Volume Manufacturing. JEC Forum International Conference on Automotive Technology Knoxville, 2016
Developments in Recycled Carbon Fiber for High Volume Manufacturing JEC Forum International Conference on Automotive Technology Knoxville, 2016 Overview of ELG Carbon Fibre Established in 2011 when ELG
More informationFabrication of Continuous Glass Fiber/Nylon6,6 Thermoplastic Composite with Improved Mechanical Properties
Fabrication of Continuous Glass Fiber/Nylon6,6 Thermoplastic Composite with Improved Mechanical Properties SPE ACCE Conference, September 9-11, 2014 Dr. Chul Lee, Application Development Manager, INVISTA
More informationD-LFT PROCESS: IN-LINE COMPOUNDING & COMPRESSION MOLDING OF LONG-GLASS-FIBER REINFORCED POLYMERS
D-LFT PROCESS: IN-LINE COMPOUNDING & COMPRESSION MOLDING OF LONG-GLASS-FIBER REINFORCED POLYMERS Daniel Schwendemann and Gerald Münz Coperion Werner & Pfleiderer GmbH & Co. KG Abstract Long fiber-reinforced
More informationThermoplastic composites in large-scale production
ENGEL at Composites Europe 2018 Thermoplastic composites in large-scale production Schwertberg, Austria September 2018 At Composites Europe 2018, from 6 to 8 November in Stuttgart, Germany, ENGEL is setting
More informationContinuous Production of Thermoplastic Honeycomb Sandwich Components for Automotive Interiors. Low Weight Low Cost Technology
Continuous Production of Thermoplastic Honeycomb Sandwich Components for Automotive Interiors. Low Weight Low Cost Technology Tomasz Czarnecki, EconCore SPE, Novi, 7 9 September 2016 Introduction: Sandwich
More informationDesign and Manufacturing of a TP Composite Bumper Beam by QSP
1 Design and Manufacturing of a TP Composite Bumper Beam by QSP JEC world 2017 conference CETIM : Damien Guillon, Clément Callens SNOP : Mickaël Moscardo, Eric Deprun, Georges TEIXEIRA 2 Cetim the french
More informationSeat Pan Opel Astra OPC
Advancing structural capability of injection molded components with Continuous Fiber Reinforcement Seat Pan Opel Astra OPC Calvin Nichols, BASF Corporation Continuous Fiber Reinforcement of Injection Molded
More informationComposites Manufacturing
Composites Manufacturing Session delivered by: Dr. Srikari S. 1 Session Objectives At the end of the session the delegates will get an overview on Manufacturing Processes Polymer Matrix Composites (PMCs)
More informationAdvanced Composite Materials
Advanced Composite Materials Moscow, 2017 About Company Prepreg-ACM is a Rusnano portfolio company founded in 2009; The company is producing wide range of unidirectional, bidirectional woven and non-woven
More informationDirect Compounding Insight and results of the first full scale pilot plant
Direct Compounding Insight and results of the first full scale pilot plant Matthias Graf Dieffenbacher GmbH+Co. KG, Heilbronner Str. 20, 75031 Eppingen, Germany, matthias.graf@dieffenbacher.de Dr. Erik
More informationThe Role of Recycled Carbon Fibres in Cost Effective Lightweight Structures. SPE Automotive Composites Conference & Exhibition Novi, 2016
The Role of Recycled Carbon Fibres in Cost Effective Lightweight Structures SPE Automotive Composites Conference & Exhibition Novi, 2016 Overview of ELG Carbon Fibre Established in 2011 when ELG Haniel
More informationLes procédés composites grandes cadences
Guillaume CHAMBON (guillaume.chambon@faurecia.com) Techno Campus Composites - 09 / 02 / 2017 Les procédés composites grandes cadences A quel prix? Agenda 1 Faurecia Composite Technologies 2 Benchmark 3
More informationHighland Composites. Expandable on-site to ~188k sq. ft. (expansion area purchased and graded).
Highland Composites New state-of-the-art ~63k sq. ft. facility including 4k+ sq. ft. clean assembly room, 2k+ sq. ft. quality lab, ample shipping with dock and ramp loading. Expandable on-site to ~188k
More informationPress release. T-RTM fit for large series. KraussMaffei presents Thermoplastic Resin Transfer Molding (T-RTM) at K 2016
T-RTM fit for large series KraussMaffei presents Thermoplastic Resin Transfer Molding (T-RTM) at K 2016 Short cycle time for automotive demonstrator in hybrid design made of fibers, plastic and metal New
More informationCOMPOSITES. Composite Materials: Structure, General Properties, and Applications
COMPOSITES Composite Materials: Structure, General Properties, and Applications COMPOSITES Composite Materials Metal Matrix Composites (MMC) Mixture of ceramics and metals reinforced by strong, high-stiffness
More informationPROCESS FOR MANUFACTURING A HIGH PERFORMANCE NATURAL FIBER COMPOSITE BY SHEET MOLDING
PROCESS FOR MANUFACTURING A HIGH PERFORMANCE NATURAL FIBER COMPOSITE BY SHEET MOLDING T.Behzad and M. Sain a Centre for Biocomposites and Biomaterials Processing and Department of Chemical Engineering
More informationTechnical Information GGB
Aluminium Alloy and Metal-Polymer Bearing Sub-Assemblies Technical Information GGB WORLD - WIDE SPECIALIST FOR HYDRAULIC BUSHING BLOCKS Introduction Bushing Blocks Sical block with bushes inserted This
More informationTechnological Developments in Fiber Glass for Lightweight Automotive Components. Juan Camilo Serrano SPE ACCE 2012
Technological Developments in Fiber Glass for Lightweight Automotive Components Juan Camilo Serrano SPE ACCE 2012 Outline Technology Drivers Technology developments through the value chain Automotive composites
More informationJoining of Dissimilar Automotive Materials
Joining of Dissimilar Automotive Materials P.K. Mallick William E. Stirton Professor of Mechanical Engineering Director, Center for Lighweighting Automotive Materials and Processing University of Michigan-Dearborn
More informationStrengthening the Pultrusion Market with High-Performance Glass Reinforcements
Strengthening the Pultrusion Market with High-Performance Glass Reinforcements JEC Composites Show PARIS 2011 Eric Dallies 1 Replacing Traditional Materials Global Materials Market (metric tons) Steel
More informationDoor Lightweighting Using Ultra-Thin AHSS Reinforced with Low Density CFRE Materials Sriram Sadagopan ArcelorMittal GDIS2018
Door Lightweighting Using Ultra-Thin AHSS Reinforced with Low Density CFRE Materials Sriram Sadagopan ArcelorMittal GDIS2018 ArcelorMittal Sriram Sadagopan, Michael Lizak, Min Kuo, Rodney Robison Project
More informationNUTC R211 A National University Transportation Center at Missouri University of Science & Technology
Pultruded Composites Using Soy-based Polyurethane Resine by K. Chandrashekhara NUTC R211 A National University Transportation Center at Missouri University of Science & Technology Disclaimer The contents
More informationProf. Alcides Lopes Leäo Biocomposites on the Base of Thermoplastic Starch Filled by Wood and Kenaf Fiber
Prof. Alcides Lopes Leäo Biocomposites on the Base of Thermoplastic Starch Filled by Wood and Kenaf Fiber KEYWORDS: Thermoplastic starch, Mechanical & physical properties, Reinforcements The increasing
More informationPLATAMID COPOLYAMIDES SPECIALTY HOT MELT ADHESIVE
2014 PLATAMID COPOLYAMIDES SPECIALTY HOT MELT ADHESIVE Adhesive Basic Definition Assembly Parameters Time, T C, Pressure Surface Bonding & Wetting -Adhesion- Internal Strength Cohesion - ADHEREND #1 ADHESIVE
More informationINTEGRATION OF POLYMER AND COMPOSITE MATERIALS FOR ENHANCED DESIGN FREEDOM AND COST-EFFICIENCY
INTEGRATION OF POLYMER AND COMPOSITE MATERIALS FOR ENHANCED DESIGN FREEDOM AND COST-EFFICIENCY P.-E. Bourban, F. Bonjour, N. Bernet, M.D. Wakeman, J.-A. E. Månson *1 Ecole Polytechnique Fédérale de Lausanne
More informationHIGH QUALITY MATRIX RESINS. UP-Resins, VE-Resins & Epoxy Systems. Composites
HIGH QUALITY MATRIX RESINS UP-Resins, VE-Resins & Epoxy Systems Composites Copyright: delphiayachts.eu Abbreviations for base resins BPA bisphenol A VE vinyl ester VEU vinyl ester urethane EN epoxy Novolac
More informationE.G.S. PILLAY ENGINEERING COLLEGE (An Autonomous Institution, Affiliated to Anna University, Chennai) Nagore Post, Nagapattinam , Tamilnadu.
17MF102 POLYMERS AND COMPOSITE MATERIALS Academic Year : 2017-2018 Programme : M.E (Manuf.Engg) Question Bank Year / Semester : I/II Course Coordinator: Dr.S.Krishnamohan Course Objectives 1. To Impart
More informationSIGRAFIL C. The PAN-Based Carbon Fiber. Carbon Fibers. Broad Base. Best Solutions.
The PAN-Based Carbon Fiber Carbon Fibers Broad Base. Best Solutions. Carbon Fibers & Composite Materials Unique Integrated Value Chain We are SGL Group The Carbon Company, one of the worldwide leading
More informationNOVEL TOUGHENED EPOXY SYSTEMS FOR DAMAGE TOLERANT COMPOSITE PRESSURE VESSELS. SAMPE Brazil - 6 November 2018 Benjamin Benz
NOVEL TOUGHENED EPOXY SYSTEMS FOR DAMAGE TOLERANT COMPOSITE PRESSURE VESSELS SAMPE Brazil - 6 November 2018 Benjamin Benz Presentation Outline Olin Composites An Overview Filament Winding Composite Pressure
More informationPolymer Polyamide - Nylon 6, 6
Common Brand Names : Akulon S, Maranyl A, Utramid A, Zytel General Information for Nylons. A family of similar semi-crystalline engineering thermoplastics generally synthesized from straight chain aliphatic
More informationMECHANICAL AND ADHESIVE PROPERTIES OF ARAMID/NYLON INSERT INJECTION MOLDING COMPOSITES
MECHANICAL AND ADHESIVE PROPERTIES OF ARAMID/NYLON INSERT INJECTION MOLDING COMPOSITES Badin Pinpathomrat, Hiroyuki Hamada Kyoto Institute of Technology, Kyoto, Japan Abstract A new joining method called
More informationLien Van der Schueren Centexbel October 19, 2017
Lien Van der Schueren Centexbel October 19, 2017 Centexbel Collective research and technical centre in Belgium On textiles & plastics Driven by the industry Activities R&D Testing Services Staff 160 skilled
More informationAutomotive. Bakelite Engineering Thermosets for Durable, Lightweight Pulleys. Application Bulletin. Key Benefits
Application Bulletin Automotive Bakelite Engineering Thermosets for Durable, Lightweight Pulleys As the automotive industry reduces vehicle weight and increases engine efficiency in order to comply with
More informationth TMS Annual Meeting & Exhibition, REWAS 2016 Symposium, February 14 18, 2016, Nashville, Tennessee
2016 145th TMS Annual Meeting & Exhibition, REWAS 2016 Symposium, February 14 18, 2016, Nashville, Tennessee 3D PRINTED ABS AND CARBON FIBER REINFORCED POLYMER SPECIMENS FOR ENGINEERING EDUCATION Michael
More informationFABRICATION OF CF/AF FIBER HYBRID THERMOPLASTICS COMPOSITE
FPCM-9 (28) The 9 th International Conference on Flow Processes in Composite Materials Montréal (Québec), Canada 8 ~ 1 July 28 FABRICATION OF CF/ FIBER HYBRID THERMOPLASTICS COMPOSITE Asami Nakai 1, 4,
More informationMechanical Behavior of Glass Fiber Reinforced Polymer Pultruded Composite Gratings
Modern Mechanical Engineering, 213, 3, 142-146 Published Online November 213 (http://www.scirp.org/journal/mme) http://dx.doi.org/1.4236/mme.213.342 Mechanical Behavior of Glass Fiber Reinforced Polymer
More informationFiber Sizing Fundamentals and Emerging Technologies ACCE / SPE
Fiber Sizing Fundamentals and Emerging Technologies ACCE / SPE 0 Contents What is fiber sizing? Sizing chemistry, formulation and application Sizing challenges Sizing benefits Sizing selection & product
More informationA Method for Directly Measuring the Interfacial Shear Strength between Short Plant Fibers and Thermoplastic Polymer
The SWST 2013 Annual Convention, Austin, USA A Method for Directly Measuring the Interfacial Shear Strength between Short Plant Fibers and Thermoplastic Polymer Wang Hao, YuYan, Tian Genlin International
More informationBroad Base. Best Solutions. SIGRAFIL Continuous Carbon Fiber Tow
Broad Base. Best Solutions. COMPOSITEs Fibers and MATERIALS SIGRAFIL Continuous Carbon Fiber Tow 2 Carbon fibers and composites made by SGL Group. Q Comprehensive product range Q Integrated value chain
More informationSME Advanced Thermoplastic Composites Seminar
Recent Developments in Thermoplastic Processing & Part Mfg. Michael Buck SME Advanced Thermoplastic Composites Seminar Knoxville, TN April 6 th, 2017 Why Thermoplastics? Extremely light, tough, durable
More informationProcessing and Properties of Metal Matrix Composites
Washington University in St. Louis Washington University Open Scholarship Mechanical Engineering and Materials Science Independent Study Mechanical Engineering & Materials Science 5-12-2016 Processing
More informationTHE SHAPE OF THINGS TO COME
THE SHAPE OF THINGS TO COME Warden Plastics Established since 1957, Warden has always been at the forefront of plastic injectionmoulding and extrusion, serving a diverse range of industries. Warden s initial
More informationCost effective lignin-based carbon fibres for innovative light-weight applications
Cost effective lignin-based carbon fibres for innovative light-weight applications 667501 GreenLight Cost effective lignin-based carbon fibres for innovative light-weight applications 1 Overview The overall
More informationRoboze one. Roboze. The only Beltless 3D printer with a real 25 micron layer THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY
Roboze one THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY Roboze The only Beltless 3D printer with a real 25 micron layer Roboze 2 Beltless Roboze Technology New stainless steel extruder
More informationThomas Barnell Cornerstone Research Group
. Healable, Shape Memory Polymers for Reflexive Composites Thomas Barnell Cornerstone Research Group Presented at a meeting of the Thermoset Resin Formulators Association at the Hilton Suites Chicago/Magnificent
More informationINTRODUCTION. What is Manufacturing? Materials in Manufacturing Manufacturing Processes Production Systems Organization of the Book
INTRODUCTION What is Manufacturing? Materials in Manufacturing Manufacturing Processes Production Systems Organization of the Book Manufacturing is Important! Technologically Economically Historically
More informationTHE DEVELOPMENT OF NOVEL CARBON-FIBER-REINFORCED STAMPABLE THERMOPLASTIC SHEETS
ECCM15-15 TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Venice, Italy, 24-28 June 212 THE DEVELOPMENT OF NOVEL CARBON-FIBER-REINFORCED STAMPABLE THERMOPLASTIC SHEETS N. Hirano 1, A. Tsuchiya 1, M. Honma
More informationProcessing of High Performance Thermoplastic Composites
Processing of High Performance Thermoplastic Composites Spring Semester 2017 131-5048-00L Manufacturing of Polymer Composites Joanna Wong 23 March 2017 22.03.2017 1 Outline Introduction to Thermoplastic
More informationArkema Intro. KEPSTAN PEKK Polymer. Tim Spahr Business Manager. Arkema, Inc
Arkema Intro KEPSTAN PEKK Polymer Tim Spahr Business Manager Arkema, Inc An Introduction to the Polyether Ketone Ketone (PEKK) Co-Polymer Timothy Spahr Business Manager Americas KEPSTAN PEKK Arkema Inc
More informationMaximum productivity, minimum unit costs
ENGEL to set more milestones in composite technologies at K 2013 Maximum productivity, minimum unit costs Schwertberg, Austria October 2013. Orientated fibre systems have become a research priority in
More informationVORAFORCE RTM Resin Systems
VORAFORCE RTM Resin Systems Mass Reduction for Mass Production Rainer Königer, Luca Lotti, Tim Morley, Katja Oswald, Martin Reimers SICOMP Conference 1 st /2 nd June 2017 DowAutomotive.com Trademark of
More informationHealable, Shape Memory Polymers for Reflexive Composites
Healable, Shape Memory Polymers for Reflexive Composites Thomas Barnell Research Engineer This work was funded under a NASA SBIR, Contract number NNL06AA07C from NASA Langley. barnelltj@crgrp.com (937)
More informationTHERMOPLASTIC MATRIX TOWPREG PRODUCTION
THERMOPLASTIC MATRIX TOWPREG PRODUCTION J. F. Silva, jfs@isep.ipp.pt Department of Mechanical Engineering, ISEP, Porto, Portugal J. P. Nunes, J. C. Velosa & C. A. Bernardo Polymer Engineering Department,
More informationComposites Composite Production Methods. Remko Akkerman Laurent Warnet C O M PO SI T ES GRO U P U N I V ERSI T Y O F T W EN T E
C O M PO SI T ES GRO U P Composites 2008-09 Composite Production Methods U N I V ERSI T Y O F T W EN T E Remko Akkerman Laurent Warnet fibre glass carbon... resin impregnation thermoplastic thermoset CFRP
More informationBENDING FATIGUE BEHAVIOR OF SMART GLASS-FIBER REINFORCED VINYLESTER COMPOSITE MATERIALS
BENDING FATIGUE BEHAVIOR OF SMART GLASS-FIBER REINFORCED VINYLESTER COMPOSITE MATERIALS 1. General Introduction M. Drissi-Habti 1,*, X. Chapeleau 1, N. Terrien 2 1 PRES LUNAM, IFSTTAR, MACS Department,
More informationISO 604 INTERNATIONAL STANDARD. Plastics Determination of compressive properties. Plastiques Détermination des propriétés en compression
INTERNATIONAL STANDARD ISO 604 Third edition 2002-03-01 Plastics Determination of compressive properties Plastiques Détermination des propriétés en compression Reference number ISO 604:2002(E) ISO 2002
More informationTooling Block The Green Alternative
Presented by Tim Blackmore Sales Manager - Advanced Engineering Materials Agenda. History Current Practices Trends & Initiatives Materials Potential savings Questions History. Patterns & moulds have been
More informationDEVELOPMENT OF POLYURETHANE SHEET MOLDING COMPOUND
DEVELOPMENT OF POLYURETHANE SHEET MOLDING COMPOUND D. Park 1, R. Maertens 2, M. Connolly 3, K. Gleich 4, V. Ugresic 1, F. Henning 2 1 Fraunhofer Project Centre for Composites Research 2 Department of Polymer
More informationMANUFACTURING WITH COMPOSITES 2
MANUFACTURING WITH COMPOSITES 2 WCC WEBINAR 10 th June 2011 1 AIMS OF WEBINAR To give an overview of the most important manufacturing methods for composite materials Covering suitable materials, typical
More informationMonitoring of Smart Composite Materials by Optical Fiber Sensors: From Fabrication to Mechanical Characterization
6th European Workshop on Structural Health Monitoring - Poster 35 Monitoring of Smart Composite Materials by Optical Fiber Sensors: From Fabrication to Mechanical Characterization X. CHAPELEAU and M. DRISSI-HABTI
More informationIntroduction to Aerospace Engineering
Introduction to Aerospace Engineering Lecture slides Challenge the future 1 Manufacturing aspects Metals & Composites Faculty of Aerospace Engineering 6-12-2011 Delft University of Technology Challenge
More informationIN-SITU POLYMERIZED CONTINUOUS FIBER THERMOPLASTIC COMPOSITE MANUFACTURED THROUGH LIQUID MOLDING PROCESSES
IN-SITU POLYMERIZED CONTINUOUS FIBER THERMOPLASTIC COMPOSITE MANUFACTURED THROUGH LIQUID MOLDING PROCESSES A. de la Calle a*, S. García-Arrieta a, C. Elizetxea a a Aerospace, Industry and Transport Division,
More informationALTERNATIVE REACTIVE MONOMER CHEMISTRIES IN RESINS FOR PULTRUSION PROCESSING
ALTERNATIVE REACTIVE MONOMER CHEMISTRIES IN RESINS FOR PULTRUSION PROCESSING W. Grant Richmond Deltech Corporation 11911 Scenic Highway Baton Rouge LA. 70807 ABSTRACT Vinyl toluene (VT), under the family
More information5.1 Essentials of Polymer Composites
5 Polymer Composites Polymer modification can follow from the mixing of two or more macromolecular compounds or their filling with reinforcing materials of inorganic or organic substances. It enables the
More informationMETHODS TO IMPROVE MECHANICAL PERFORMANCE OF CARBON FIBER EPOXY SMC
METHODS TO IMPROVE MECHANICAL PERFORMANCE OF CARBON FIBER EPOXY SMC I. Swentek 1*, S. Greydanus 1, C. Ball 2 1 Hexion Canada Inc., London, Ontario, Canada 2 Hexion Inc., Columbus, Ohio, USA * Phone: 519-562-9158
More informationA High-Performance/High-Temperature Resin for Implantable Devices
A High-Performance/High-Temperature Resin for Implantable Devices Robert G. Bryant, PhD Branch Head, Advanced Materials & Processing Branch NASA Langley Research Center A Brief History : NASA HSR Program:
More informationTHERMOPLASTIC PREPREG INSERT INJECTION MOLDING COMPOSITES: MECHANICAL AND ADHESIVE PROPERTIES. Introduction
THERMOPLASTIC PREPREG INSERT INJECTION MOLDING COMPOSITES: MECHANICAL AND ADHESIVE PROPERTIES Badin Pinpathomrat, Akihiko Imajo, Supaphorn Thumsorn, Hiroyuki Hamada Kyoto Institute of Technology, Kyoto,
More informationA study on preparation and mechanical properties of long jute fiber reinforced polylactic acid by the injection molding process
High Performance Structures and Materials IV 231 A study on preparation and mechanical properties of long jute fiber reinforced polylactic acid by the injection molding process T. Fujiura 1, K. Sakamoto
More informationInnovative Advanced Composite Materials for Various Industries
Innovative Advanced Composite Materials for Various Industries 2017 About UMATEX Group UMATEX Group is a management company and part of a new promising Composite Materials Division of ROSATOM State Corporation.
More informationIMPREGNATION PROCESS FOR FIBER HYBRID BRAIDED THERMOPLASTIC COMPOSITES
THE 19 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS IMPREGNATION PROCESS FOR FIBER HYBRID BRAIDED THERMOPLASTIC COMPOSITES T. Motochika 1*, K. Nakazawa 2, A. Ohtani 1, A. Nakai 1 1 Faculty of Engineering,
More informationEffect of Water Absorption on Coconut Fibre Reinforced Functionalized Polyethylene Composites Developed by Palsule Process
Effect of Water Absorption on Coconut Fibre Reinforced Functionalized Polyethylene Composites Developed by Palsule Process Effect of Water Absorption on Coconut Fibre Reinforced Functionalized Polyethylene
More informationIN-SITU POLYMERIZATION OF REINFORCED THERMOPLASTICS
IN-SITU POLYMERIZATION OF REINFORCED THERMOPLASTICS Jim Mihalich Cyclics Corp Abstract Most reinforced thermoplastics are produced from fully polymerized resins which are then introduced to the reinforcement
More informationRajesh Turakhia The Dow Chemical Company, Epoxy R & D
. Novel Epoxy Toughening for Coatings and Composites Applications Rajesh Turakhia The Dow Chemical Company, Epoxy R & D Presented at a meeting of the Thermoset Resin Formulators Association at the Hilton
More informationPOLYMER ADDITIVES ADDITIVES FOR POLYAMIDES
POLYMER ADDITIVES ADDITIVES FOR POLYAMIDES PRODUCT INNOVATIONS TARGETED TO CUSTOMER DEMANDS BrüggemannChemical continuously develops speciality additives in response to the requirements of the market.
More informationTHE DESIGN OF A THERMOPLASTIC CF COMPOSITE FOR LOW PRESSURE MOLDING
THE DESIGN OF A THERMOPLASTIC CF COMPOSITE FOR LOW PRESSURE MOLDING Takeshi Ishikawa, Masao Tomioka, Masahiro Osuka Advanced Composites Research Group, Toyohashi Research Laboratories, MITSUBISHI RAYON
More informationEUROGRATE FIBERGLASS PULTRUDED GRATINGS
EUROGRATE FIBERGLASS PULTRUDED GRATINGS What is Pultrusion Pultrusion is a continuous molding process in which fiberglass longitudinal roving, multidirectional mat and a synthetic surfacing veil are passed
More informationChapter 19. Forming and Shaping Plastics and Composite Materials
Chapter 19 Forming and Shaping Plastics and Composite Materials Characteristics of Forming and Shaping Processes for Plastics and Composite Materials Forming and Shaping Processes for Plastics, Elastomers,
More informationChapter 19. Forming and Shaping Plastics and Composite Materials
Chapter 19 Forming and Shaping Plastics and Composite Materials Characteristics of Forming and Shaping Processes for Plastics and Composite Materials 1 Forming and Shaping Processes for Plastics, Elastomers,
More information