INEX BOARDS INEX FLOOR FRL DOWN LIGHTWEIGHT FLOOR SYSTEMS ANY BUILDING ANY SURFACE ANYWHERE FRL 90/90/90 DOWN FRL 90/90/90 DOWN FRL 90/90/90 DOWN

Transcription

1 INEX BOARDS ANY BUILDING ANY SURFACE ANYWHERE FRL DOWN LIGHTWEIGHT FLOOR SYSTEMS FRL 90/90/90 DOWN FRL 90/90/90 DOWN FRL 90/90/90 DOWN INEX FLOOR

2 INEX>FLOOR is a lightweight yet incredibly strong multi-purpose floing material f all fms of lightweight construction. It begins as a cost effective substrate floing f all applications such as bathrooms, living areas external deck; but can also be used as a finished flo itself. No speciality tools are required to fix INEX>FLOOR, which can be cut like any other fibre cement sheet and does not need to be pre-drilled befe fixing. Yet at only mm 9mm thick it outperfms any other comparable product f strength. FRL in the DOWN Direction On either a timber steel frame INEX>FLOOR can be used to deliver Fire Resistance Level (FRL) perfmance in the DOWN direction. This, in conjunction with its exceptional acoustic perfmances makes INEX>FLOOR ideally suited f multi-level lightweight construction. Whether your selection of construction materials flo systems be determined by; Time & Cost, Perfmance, Quality Space Saving INEX>FLOOR delivers. CONTENTS INEX>FLOOR FRL DOWN Flo Systems Steel Timber Suppts SPAN & LOADING PROPERTIES INEX>FLOOR FRL DOWN Flo Systems Steel s: Class Buildings, Type A Construction INEX>FLOOR FRL DOWN Flo Systems Timber s: Class Buildings, Type A Construction

3 HORIZONTAL SEPARATING ELEMENTS. Clause. SPECIMEN ORIENTATION requires that: The specimen shall be exposed from fire from below (emphasis added). This is in the UP direction. INEX FLOOR FRL in the DOWN direction Notwithstanding the above UBIQ recognises that there are increasing industry requirements f an FRL in the DOWN direction, particularly driven by the increased number of residential and commercial buildings being built with lightweight construction. Accdingly UBIQ has developed a number of FRL DOWN flo systems to assist Builders and Certifiers in their selection of suitable materials f lightweight construction. ANY BUILDING ANY SURFACE ANYWHERE FRL DOWN FLOOR SYSTEMS OR SUPPORTS FRL in the UP direction Deemed to Satisfy Fire Resistance Level (FRL) requirements under the Building Code of Australia (BCA) are met by Fire Tests and Assessments in accdance with AS Methods of fire tests on building materials, components and structures Part : Fire resistance tests of elements of construction. Section of this standard deals with; FLOORS, ROOFS AND CEILINGS, HORIZONTAL SEPARATING ELEMENTS. Clause. SPECIMEN ORIENTATION requires that: The specimen shall I-Beam, Truss I-Beam, Truss be exposed from fire from below (emphasis added). This is in the UP direction. FRL in the DOWN direction Notwithstanding the above UBIQ recognises that there are increasing industry requirements f an FRL in the DOWN direction, particularly driven by the increased UP TO number 00mm SPAN of residential and commercial buildings being UP TO built 00mm with SPAN lightweight construction. Accdingly UBIQ has developed a number of FRL DOWN flo plasterboard systems ceiling to required assist Builders and Certifiers in their selection of suitable materials f lightweight REFER TO LEGEND construction. ON PAGE FRL FRL DOWN DOWN FLOOR SYSTEMS SYSTEMS - JOISTS JOISTS FRL DOWN SYSTEMS - JOISTS FRL 0/0/0 Beam / LVL Minimum 0mm standard grade FRL 90/90/90 FRL 90/90/90 Beam / LVL Purlin Truss Open Web Purlin Truss Open Web UP TO 00mm SPAN REFER TO LEGEND ON PAGE REFER TO LEGEND ON PAGE FRL FRL DOWN DOWN FLOOR SYSTEMS - JOISTS JOISTS INEX>FLOOR, with its intrinsic high strength and high fire resistance & acoustic perfmances, is well placed to deliver appropriate systems to meet the needs of lightweight construction in buildings. The following pages provide FRL DOWN perfmances when using INEX>FLOOR over timber steel joists. Full flo system options are also provided, complete with FRL 0/0/0 acoustic insulation perfmances. Minimum mm standard grade plasterboard ceiling required FRL 90/90/90 I-Beam, Truss I-Beam, Truss Beam / LVL Beam / LVL UP TO 00mm SPAN REFER TO LEGEND ON PAGE REFER TO LEGEND ON PAGE Minimum 0mm standard grade plasterboard ceiling required UP TO 00mm SPAN SPAN & LOADING PROPERTIES (mm DEFLECTION LIMIT) FRL DOWN SYSTEMS - JOISTS INEX>FLOOR SYSTEMS JOIST SPACING (mm) 0 00 CONCENTRATED UNIFORMLY CONCENTRATED UNIFORMLY ACTION (kn) DISTRIBUTED ACTION (kn) DISTRIBUTED LOAD (kpa) LOAD (kpa) INEX>FLOOR9+INEX>FLOOR INEX>FLOOR9+PARTICLEBOARD This SPAN & LOADING PROPERTIES Table set outs the maximum permissible Concentrated Loads (kn) and Unifmly Distributed Loads (kpa) f both composite flo systems over stated joist spans with the allowable deflection limit of mm. INEX>FLOOR, with its intrinsic high strength and high fire resistance & acoustic perfmances, is well placed to deliver appropriate systems to meet the needs of lightweight construction in buildings. The following pages provide FRL DOWN perfmances when using INEX>FLOOR over timber steel joists. Full flo system options are provided f Class Buildings, Type A Construction, complete with acoustic insulation perfmances.

4 stems Suitable f Class Buildings, Type A Construction FRL DOWN SYSTEMS - JOISTS FRL DOWN SYSTEMS JOISTS stems Suitable f Class Buildings, Type A Construction Systems Suitable f Class Buildings, Type A Construction assessed by others f FRL Typically x mm Purlin with plywood particleboard floing as an option Purlin Typically x mm lining and as tested otherwise lining and as tested otherwise assessed by others f FRL with plywood particleboard floing as an option SYSTEM UBIQ FL- (FRL/D) FIRE AIRBORNE SOUND IMPACT SOUND INSULATION (PKA) JOIST INEX>FLOOR RATING INSULATION (PKA) Timber + Underlay Carpet + Underlay (mm) (mm) (FRL) Rw / Rw+Ctr Ln,w / Ln,w+Ci Ln,w+Ci 0 / less less 90/90/ mm UP DOWN / less** less EWFA / 8 less** less Truss Open Web Truss Open Web **Capable of meeting AAAC Star Rating (Ln,w 0 less) with acoustic detailing to underlay specification. ROLLED SOLID BEAMS ROLLED SOLID BEAMS SYSTEM UBIQ FL-8 (FRL/D) JOIST INEX>FLOOR (mm) (mm) ROLLED BEAMS PURLINS 9mm THICK T&G PARTICLEBOARD OPEN 9mm THICK T&G STRUCTURAL PLYWOOD 9mm THICK WEB T&G PARTICLEBOARD TRUSSES TYPICAL FLOOR JOISTS AS NOTED JOINS OFF STUD AND WITH BACKING PLATE DO NOT RUIRE SEALING JOINS OFF STUD AND WITH BACKING PLATE DO NOT RUIRE SEALING MAX 00 JOINS ON STUD RUIRE SEALING WITH PROPRIETARY FIRE SEALANT SUCH AS BOSTIK 'FIREBAN ' JOINS ON STUD RUIRE SEALING WITH PROPRIETARY FIRE SEALANT SUCH AS BOSTIK 'FIREBAN ' TONGUE FACING UP AT TONGUE AND GROOVE JOINT MAX 00 MAX TONGUE 00FACING UP FIRE AIRBORNE SOUND IMPACT SOUND TONGUE INSULATION AND GROOVE JOINT (PKA) 0 0 RATING INSULATION (PKA) Timber + Underlay Carpet + Underlay (FRL) Rw 0 / Rw+Ctr Ln,w / Ln,w+Ci Ln,w+Ci MAX / 8 less** less 90/90/ mm UP DOWN / 8 less** less EWFA / 8 less** less **Capable of meeting AAAC Star Rating (Ln,w 0 less) with acoustic detailing to underlay specification. OPEN WEB TRUSSES OPEN WEB TRUSSES FLOOR FINISH VARIES: INSULATION Nom. mm DEEP REFER TO NOTES BELOW. REFER NOTES BELOW FINISH VARIES: INSULATION INEX>FLOOR 9 9mm THICK PROPRIETARY - Nom.mm CEILING SYSTEM DEEPWITH RESILIENT TO NOTES BELOW. 9mm THICK T&G STRUCTURAL PLYWOOD REFER ACOUSTIC NOTES MOUNTS: BELOWNom. mm DEEP NOTES PROPRIETARY CEILING SYSTEM WITH RESILIENT FLOOR9-9mm THICK FINISH VARIES: TYPICAL FLOOR JOIST AS NOTED Tables provide FRL perfmances to AS0. and 9mm predicted THICK sound T&G insulation PARTICLEBOARD by UBIQ s acoustic consultants - PKA Acoustic INSULATION ACOUSTIC Consulting MOUNTS: PTY - Nom.mm LTD. mm DEEP DEEP TO NOTES BELOW. + UNDERLAY = minimum mm engineered 9mm timber THICK flo with T&G minimum STRUCTURAL mm rubber PLYWOOD acoustic underlay and following REFER manufacturer s NOTES isolation BELOWdetail. CARPET + UNDERLAY = quality carpet with minimum 8mm foam underlay. FLOOR9-9mm All predictions THICK given f flo joists at 0mm centres. PROPRIETARY CEILING SYSTEM WITH RESILIENT ide FRL perfmances to AS0. and predicted TYPICAL sound insulation FLOOR by JOIST UBIQ's AS NOTED acoustic consultants - Insulation options are; mm R.0.kg/m Knauf Earthwool ceiling batts, mm R..0 kg/m Bradfd Gold ceiling ACOUSTIC PKA Acoustic batts. MOUNTS: Consulting Nom. mm PTY LTD. DEEP UNDERLAY Fire Resistance = minimum Levels mm (FRLs) in engineered the UP direction timber are provided flo with using FRLs minimum delivered mm by commonly rubber available acoustic fire resisting underlay plasterboards. and following FRL perfmances manufacturer's should be isolation confirmed detail. with the manufacturer of the fire resisting plasterboard selected. UNDERLAY = quality carpet with minimum 8mm foam underlay. ns ide given FRL perfmances flo joists to at 0mm AS0. centres. and predicted sound insulation by UBIQ's acoustic consultants - PKA Acoustic Consulting PTY LTD. UNDERLAY ptions are; mm = minimum R.0 mm.kg/m engineered Knauf 'Earthwool' timber flo ceiling with minimum batts, mm rubber R. acoustic.0kg/m underlay Bradfd and Gold following ceiling manufacturer's batts. isolation detail. UNDERLAY nce Levels (FRLs) = quality in the carpet UP direction with minimum are provided 8mm foam using underlay. FRLs delivered by commonly avaialble fire resiting plasterboards. FRL perfmances should Typically x mm lining and as tested otherwise assessed by others f FRL Typically 90/90/90, and x mm has been assessed Fire with Rated plywood Plasterboard particleboard as ceiling lining floing and as as an tested option otherwise assessed by others f FRL with plywood particleboard floing as an option 0 0

5 FRL DOWN SYSTEMS JOISTS FLOOR SYSTEM ASSEMBLY ASSEMBLY TYPICAL SECTION - JOISTS && FLOORING ONLY Nom. 00 LONG x 00 WIDE 9mm STRUCTURAL PLYWOOD OR PARTICLEBOARD FIXED IN ACCORDANCE WITH MANUFACTURERS RUIREMENTS LAYER - PLYWOOD OR PARTICLEBOARD SUBSTRATE SNAKE OF GLUE AT Nom. 00mm SPACING Min. CLASS 8 GAUGE COUNTER SINKING SCREW THROUGH TO PLY OR PARTICLEBOARD BELOW ENSURE JOINTS IN INEX>FLOOR DO NOT ALIGN WITH JOINTS IN PLY OR PARTICLEBOARD BELOW 00 LONG x 00 WIDE INEX>FLOOR9 NOTE: LAY INEX>FLOOR ROUGH SIDE UP IN ALL WET AREAS WHERE WATERPROOF MEMBRANE IS RUIRED LAYER - INEX>FLOOR9

6 FRL DOWN SYSTEMS - JOISTS FRL DOWN SYSTEMS JOISTS ystems Suitable f Class Buildings, Type A Construction Systems Suitable f Class Buildings, Type A Construction Systems Suitable f Class Buildings, Type A Construction JOIST BEAM (such as LVL) assessed Typically by x others mmf FRL JOIST BEAM (such as LVL) floing as an option Typically x mm lining and as tested otherwise 90/90/90, Fire Rated and Plasterboard has been assessed ceiling with lining plywood and as tested particleboard otherwise assessed by others f FRL with plywood particleboard floing as an option SYSTEM FL-08 UBIQ FL-08 FL-08 (FRL/D) FIRE AIRBORNE SOUND IMPACT SOUND INSULATION (PKA) JOIST INEX>FLOOR RATING / INSULATION (PKA) Timber + Underlay Carpet + Underlay (mm) (mm) (FRL) / Rw / Rw+Ctr Ln,w / Ln,w+Ci Ln,w+Ci 0 /8 / / less less 90/90/ mm UP DOWN / / less** less EWFA /8 / 8 less** less **Capable of meeting AAAC Star Rating (Ln,w 0 less) with acoustic detailing to underlay specification. JOINS ON STUD RUIRE SOLID JOISTS, LVL SEALING GLULAM WITH PROPRIETARY FIRE SEALANT SUCH AS BOSTIK 'FIREBAN ' SOLID JOISTS, LVL GLULAM SOLID JOISTS, LVL GLULAM I-Beam, Truss I-Beam, Truss SYSTEM UBIQ FL-9 (FRL/D) MAX 00 MAX TONGUE 00FACING UP AT FIRE AIRBORNE SOUND IMPACT SOUND TONGUE INSULATION AND GROOVE JOINT (PKA) 0 0 RATING INSULATION (PKA) Timber + Underlay Carpet + Underlay I-BEAMS, TRUSSES COMPOSITES FLOOR FINISH VARIES: 9mm THICK T&G PARTICLEBOARD REFER TO NOTES BELOW. 9mm THICK T&G STRUCTURAL PLYWOOD REFER NOTES BELOW I-BEAMS, TRUSSES COMPOSITES INEX>FLOOR 9 9mm THICK 9mm TYPICAL THICK T&G PARTICLEBOARD FLOOR JOISTS AS NOTED JOINS OFF STUD AND WITH BACKING PLATE DO NOT RUIRE SEALING JOINS OFF STUD AND WITH BACKING PLATE DO NOT RUIRE SEALING JOINS ON STUD RUIRE SEALING WITH PROPRIETARY FIRE SEALANT SUCH AS BOSTIK 'FIREBAN ' TONGUE FACING UP AT TONGUE AND GROOVE JOINT JOIST INEX>FLOOR (mm) (mm) (FRL) Rw / Rw+Ctr Ln,w / Ln,w+Ci Ln,w+Ci MAX 00 MAX / 8 less** less 90/90/ mm UP DOWN / 8 less** less EWFA / 8 less** less **Capable of meeting AAAC Star Rating (Ln,w 0 less) with acoustic detailing to underlay specification. I-BEAMS, TRUSSES COMPOSITES INSULATION Nom. mm DEEP PROPRIETARY CEILING SYSTEM WITH RESILIENT OOR FINISH VARIES: INSULATION - Nom.mm DEEP ACOUSTIC MOUNTS: Nom. mm DEEP EFER TO NOTES BELOW. 9mm THICK T&G STRUCTURAL PLYWOOD REFER NOTES BELOW NOTES PROPRIETARY CEILING SYSTEM WITH RESILIENT EX>FLOOR9 FINISH Tables -9mm VARIES: provide THICK FRL perfmances to AS0. and predicted TYPICAL 9mm sound THICK insulation T&G FLOOR by PARTICLEBOARD UBIQ s JOIST acoustic AS consultants NOTED - PKA Acoustic Consulting PTY LTD. REFER TO NOTES + BELOW. UNDERLAY = minimum mm engineered INSULATION - Nom.mm DEEP timber 9mm flo with THICK minimum T&G mm STRUCTURAL rubber acoustic PLYWOOD underlay and following manufacturer s ACOUSTIC isolation MOUNTS: detail. Nom. mm DEEP REFER NOTES BELOW CARPET + UNDERLAY = quality carpet with minimum 8mm foam underlay. INEX>FLOOR9 All predictions -9mm given THICK f flo joists at 0mm centres. PROPRIETARY CEILING SYSTEM WITH RESILIENT Insulation options are; mm R.0.kg/m Knauf TYPICAL FLOOR JOIST AS NOTED Earthwool ceiling batts, mm R..0 kg/m Bradfd Gold ceiling batts, ACOUSTIC equivalent. MOUNTS: Nom. mm DEEP provide FRL perfmances to AS0. and predicted sound insulation by UBIQ's acoustic consultants - PKA Acoustic Consulting PTY LTD. Fire Resistance Levels (FRLs) in the UP direction are provided using FRLs delivered by commonly available fire resisting plasterboards. FRL perfmances should be confirmed with the R + UNDERLAY manufacturer = minimum of the fire resisting mm plasterboard engineered selected. timber flo with minimum mm rubber acoustic underlay and following manufacturer's isolation detail. T + UNDERLAY = quality carpet with minimum 8mm foam underlay. s provide FRL perfmances to AS0. and predicted sound insulation by UBIQ's acoustic consultants - PKA Acoustic Consulting PTY LTD. ictions given f flo joists at 0mm centres. ER + UNDERLAY = minimum mm engineered timber flo with minimum mm rubber acoustic underlay and following manufacturer's isolation detail. on options are; mm R.0.kg/m Knauf 'Earthwool' ceiling batts, mm R..0KG/M Bradfd Gold ceiling batts. ET + UNDERLAY = quality carpet with minimum 8mm foam underlay. sistance Levels (FRLs) in the UP direction are provided using FRLs delivered by commonly avaialble fire resiting plasterboards. FRL perfmances should 0 Typically x mm lining and as tested otherwise assessed Typically by x others mmf FRL 90/90/90, Fire Rated and Plasterboard has been assessed ceiling with lining plywood and as tested particleboard otherwise floing assessed an by option others f FRL with plywood particleboard floing as an option 0 0

7 FRL DOWN SYSTEMS JOISTS FLOOR SYSTEM ASSEMBLY ASSEMBLY TYPICAL SECTION - JOISTS & & FLOORING ONLY ONLY 00 LONG x 00 WIDE INEX>FLOOR9 LAYER - INEX>FLOOR BEAD OF GLUE AT EACH JOIST Min. CLASS 0 GAUGE COUNTER SINKING SCREW THROUGH TO JOISTS (0mm LONG) NOTE: FIRST LAYER OF INEX>FLOOR TO BE LAID ROUGH SIDE UP SNAKE OF GLUE AT Nom. 00mm SPACING Min. CLASS 8 GAUGE COUNTER SINKING SCREW THROUGH TO st LAYER OF INEX>FLOOR ENSURE JOINTS IN INEX>FLOOR DO NOT ALIGN WITH JOINTS IN INEX>FLOOR BELOW 00 LONG x 00 WIDE INEX>FLOOR9 NOTE: LAY INEX>FLOOR ROUGH SIDE UP IN ALL WET AREAS WHERE WATERPROOF MEMBRANE IS RUIRED LAYER - INEX>FLOOR9

8 Proudly Distributed by Sydney (0) Townsville (0) 09 Newcastle (0) 9 Melbourne (0) John Cook & Sons (0) 98 0 Adelaide (08) Brisbane (0) 800 Perth (08) This brochure was printed on December st 0 and was current to infmation at that time. UBIQ Pty Ltd is continually updating its brochure and install material. We advise all enquirers to source the most current brochures and/ technical material available online at