Product Specifications MRI Trench Duct FR1

Transcription

1 NOVA Energy & Automation Product Specifications MRI Trench Duct FR1 Model AT-FR1 Aluminum Non Ferrous 03 January 2012

2 Product Description 1. Non Ferrous Large Capacity Trench (Floor) Duct Non Ferrous (Aluminum) trench duct AT-FR1 is commonly used to route signalling cables under the MRI machine inside of Philips MRI Installations. Figure 1: Aluminum Trench Duct AT-FR1 2. System Compatibility Philips MRI Installations: Achieva Quasar 3.0T and several other related installations Please select item AT-FR1 3. Identification Philips Medical Solutions : The proper trench duct can be identified in the Philips Constructions Drawings sheet SD-1 Power Diagram Bottom left Magnet and Patient Support Systems & Top Right Cable Duct Cover Requirements item FR1 2

3 4. Features/Benefits Features ETL listed to UL 870 and cul standards to conform to NEC. Constructed of 12GA 3003 formed Aluminium ¼ plated aluminum load bearing cover Polished Aluminum Finish Manufactured the the OEMs specifications Auto Cad Drawings available for every project Continuous water tight gasket runs the entire length of the duct Benefits Allows access to wiring and mechanical connections for maintenance Provides a standardized platform for future modifications or upgrades Allows cable routing to be accomplished in applications where conduit is not feasible Engineering and customer service support throughout the project No Small order charge Packaged and labeled with project identification such as room number, wall number and configuration to assist in faster installations Designed for Tile flooring, laminate flooring and non covered flush mounted applications Non Ferrous for MRI Applications 5. Specifications Model Description Construction Cover Construction Finish Dimensions Approvals Hardware AT-FR1 Custom MRI Trench compatible with Philips 12 Gauge 3003 formed Aluminum Rabbetted cover ¼ aluminium rated for 200lbs/sq ft DuPont Imron 3.5 HG high gloss ASA-49 (Light Grey) 150mm W x 27mm D (including cover depth) x 1030mm L ETL Listed to UL/cUL 870 file CRT-001a, NEC Article 376, NEC 517 spring nuts, clips, pre-drilled holes, mounting screws, and levelling bolts included 3

4 Figure 2: Top Profile Aluminum Trench Duct AT-FR1 6. Product Service and Technical Assistance Nova Automation, LLC 2722 N. Avondale Blvd Milwaukee WI PH# Website: 7. Warranty This limited warranty set forth below is given by Nova Automation ( Seller ) with respect to the electrical equipment ( Product ) packaged with this limited warranty. The Product, when delivered to you in new condition in its original packaging, is warranted against defects in materials or workmanship as follows: For a period of three (3) years from the date of original purchase, defective parts or a defective Product returned to a Seller, or its authorized service providers, as applicable, and proven to be defective upon inspection, will be repaired, or exchanged for a new Product, as determined by the Seller, or the authorized service provider. This limited warranty covers all defects encountered in normal use of the Product, and does not apply in the following cases: Loss of or damage to the Product due to abuse, mishandling, alteration, accident, electrical current fluctuations, failure to follow operating, maintenance or environmental instructions prescribed by Seller, failure to follow Sellers installation instructions, or service performed by someone other than Seller or its authorized service provider. Nova assumes no responsibility for labor or freight costs incurred in connection with the installation, removal, or replacement of products determined to be defective or any consequential or incidental damages arising from the use of the product. Nova Automations entire liability on any claim of loss or damage resulting from a defective product is limited to the replacement of the product. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH IT WAS MANUFACTURED. 4

5 8. Approvals Prepared By This document requires the following approvals Approved By Approval Date 5