FACT SHEET CPC CERTIFICATE III IN FORMWORK/FALSEWORK

Transcription

1 FACT SHEET CPC CERTIFICATE III IN FORMWORK/FALSEWORK This qualification provides a trade outcome in construction of formwork and falsework covering work in residential and commercial applications. The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work. Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement. Qualification Pathways Entry Requirements Study Duration and Enrolment Periods Mode of Delivery Cost How to Enrol Upon successful completion of this qualification you will receive a Certificate III in Formwork/Falsework CPC After successful completion of CPC31511 Certificate III in Formwork/Falsework, you may continue with your studies by enrolling in: Managerial Course: (NOTE: BSBSMB401A Establish legal and risk management requirements of small business can be taken as an Elective in CPC30211 Certificate III in Carpentry as assisting in starting up your Carpentry business). Queensland specific. CPC30211 Certificate III in Carpentry (NOTE: A large number of the Units of Competency can be Credited across from CPC31511 Certificate III in Formwork/Falsework into CPC30211 Certificate III in Carpentry) CPC40110 Certificate IV in Building & Construction (Building). (One Certificate III competency counts towards the Certificate IV program) (Builder Low Rise license - QLD only) CPC50210 Diploma of Building & Construction (Building) (Building Practitioner Registration Western Australia only) CPC50210 Diploma of Building & Construction (Building) (Builder Medium Rise license - QLD only) Career opportunities include employment as a: Formworker This qualification does not have any specific entry requirements. However, completion of Year 12 English and Mathematics is recommended. Enrolments are taken on an ongoing basis. Students can enrol at any time 24/7 on-line, over the phone or in person during business hours. Enrolment is for a period of 12 months. NOTE: Keystone Training delivers this qualification by Recognition of Prior Learning (RPL) and/or Gap Training - NOT FULL TRAINING. The candidate requires a minimum of 3 to 4 years experience within this trade. (Please enquire for verification). Flexible Delivery - Online with face to face/phone/ /online Tutorial support, Face to Face, Distance delivery with face to face/phone/ /online Tutorial. NOTE: Practical training consists of On the Job training and applicants who wish to train with Keystone Training MUST have access to all physical recourses. All enrolment fees are inclusive for RPL, learner resources, assessment trainer tutorials, access to internet and issuing of qualification. Please to the Price List section for fee structure. NOTE: This program is conducted by a combination of RPL and gap training. To enrol in this mode of delivery and assessment you MUST be currently working in the building and construction industry performing construction type work with a minimum of 4 years current experience. This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 1 of 10

2 NOTE: Practical Training consists of On the Job gap training and therefore applicants who wish to train with Keystone Training MUST have access to all physical resources. To enrol in this qualification please contact Keystone Training. Prior to enrolment a copy of the Student Handbook is available via download or via contacting our office. Recognition of Prior Learning Credit Transfers Learning Support Work Health & Safety Contact Us Applicants may receive acknowledgment of their knowledge and experiences through RPL. Evidence for RPL may include: work experience life experiences (including voluntary work and leisure pursuits) previous study e.g. qualifications, industry training professional development programs or units The matrix below is a guide for previously gained units of competency in CPC Keystone Training supports many learning needs. Reasonable adjustments can be made to assist students in achieving a competent result where learning difficulties may be present. For students needing additional Language, Literacy and Numeracy support Keystone recommends Fruition Tuition contact details are contact no Keystone Training offers support via many modes including face to face tutorials, Skype, and phone. Refer to the Student Handbook for detailed information on support offered by Keystone Training. Please note that CPC31511 Certificate III in Formwork/Falsework has practical units requiring field work (On the Job), therefore students must have access to the appropriate personal protective equipment to perform all practical tasks. If you would like additional information about this qualification, or about any of the wide range of qualifications offered by Keystone Training, you can visit our website or contact us via: Office: Monday to Friday: 8.30am to 4.30pm; Fax: (07) Street Address: Units 36 & 37, 17 Cairns Street, Loganholme 4129 Postal Address: PO Box 4262, Eight Mile Plains QLD admin@keystonetraining.com.au To Achieve the Qualification CPC31511 CERTIFICATE III IN FORMWORK/FALSEWORK requires the completion of ALL 19 Core & 6 Elective Units of Competency (25 in Total) listed in COLUMN 1. A maximum of two of the required six elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package. TRANSFER & ELIGIBILITY FOR in CPC31511 Certificate III in Formwork/Falsework. If you have successfully completed ANY of the following Units of Competency or Qualifications listed in columns 3 OR 4 and you can produce copies of your qualification you will NOT have to enrol in the corresponding Unit of Competency in COLUMN 1 to complete the full Qualification because you will be given Credit for that Unit. Evidence of your Qualification could include: Certificates and Academic Transcripts from the Registered Training Organisation who issued the qualification. NOTE: You cannot Credit Transfer in ALL of the Qualification; a minimum of ONE Unit MUST be Completed to achieve the Qualification (Contact Keystone Training to discuss the one Unit to enrol in). This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 2 of 10

3 CORE UNITS in CPC31511 UNIT OUTLINE TRANSFER ELIGIBLE CPCCCA2002B Use carpentry tools and equipment outcomes required to safely select and use carpentry tools and equipment. It includes hand tools, power tools, pneumatic tools, plant and equipment. CPCCCA2002B Use carpentry tools and equipment CPCCCA2011A Handle carpentry materials outcomes required to safely manually handle, store and apply environmental management principles associated with carpentry materials and components. It includes preparing material for mechanical handling. CPCCCA2001A Handle carpentry materials CPCCCA3001A Carry out general demolition of minor building structures outcomes required to carry out general demolition work of minor building structures to facilitate alterations, extensions and additions to a building. It includes work being completed to a work schedule, plans and specifications. CPCCCA3001A Carry out general demolition of minor building structures CPCCCA3002A Carry out setting out outcomes required to identify site boundaries and survey indicators, and establishing, measuring and setting up profiled set outs for buildings and structural components of building work. CPCCCA3002ACarry out setting out CPCCCA3023A Carry out levelling operations outcomes required to conduct levelling procedures using the rise and fall method and the height of instrument method for the purpose of establishing correct and accurate set out of buildings, their components and preparation. It includes the set up, testing and use of levelling devices and undertaking closed traverses using a range of levelling equipment. CPCCCA3023A Carry out levelling operations This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 3 of 10

4 CORE UNITS in CPC31511 UNIT OUTLINE TRANSFER ELIGIBLE CPCCCM1012A Work effectively and sustainably in the construction industry outcomes required to prepare for and sustain effective work within the construction industry. It covers the identification and clarification of the construction industry work context, scope and employment conditions, responsibility required to be accepted by the individual, working in a team, individual career path improvement activities and sustainable work practices and techniques. CPCCCM1002A Work effectively and sustainably in the construction industry CPCCCM1013A Plan and organise work outcomes required to plan and organise individual and group work activities on a construction site. The unit includes identifying task requirements, planning steps and organising work. CPCCCM1003A Plan and organise work CPCCCM1014A Conduct workplace communication outcomes required to communicate effectively with other workers in a construction workplace environment. It includes gathering, conveying and receiving information through verbal and written forms of communication. CPCCCM1004A Conduct workplace communication CPCCCM1015A Carry out measurements and calculations outcomes required to carry out measurements and perform simple calculations to determine task and material requirements for a job in a construction work environment. CPCCCM1005A Carry out measurements and calculations CPCCCM2001A Read and interpret plans and specifications outcomes required to read and interpret plans and specifications relevant to construction operations. It includes the identification of types of plans and drawings and their functions, the recognition of commonly used symbols and abbreviations, the identification of key features and specifications on a site plan, the comprehension of written job specifications and the recognition of document status and amendment detail. CPCCCM2001A Read and interpret plans and specifications This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 4 of 10

5 CORE UNITS in CPC31511 UNIT OUTLINE TRANSFER ELIGIBLE CPCCCM2002A Carry out excavation outcomes required to undertake hand excavation tasks and excavations requiring the assistance of plant machinery to form excavations for footings, and the provision of services. It includes excavation to new and existing sites, and new services or the diversion of existing services. CPCCCM2002A Carry out excavation; OR BCGCM2002B Carry out excavation CPCCCM2007B Use explosive power tools outcomes required to apply safe and effective operation of explosive power tools (EPT), used to fasten materials or fix fasteners to bases. It includes both direct action and indirect action explosive powered fastening tools. CPCCCM2007B Use explosive power tools; OR CPCCCM2007A Use explosive power tools CPCCCM2008B dismantle restricted height scaffolding outcomes required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications. It includes placement of safety barriers and only involves modular scaffolding restricted to a height of 4 metres. CPCCCM2008B Erect and dismantle restricted height scaffolding; OR CPCCCM2008A Erect and dismantle restricted height scaffolding CPCCCM2010B Work safely at heights outcomes required to work safely on construction sites where the work activity involves working above 1.5 metres from ground level and where fall protection measures are required. CPCCCM2010B Work safely at heights; OR CPCCCM2010A Work safely at heights CPCCCO2013A Carry out concreting to simple forms outcomes required to safely install formwork, reinforcement and place and finish concrete for the construction of minor slabs, pathways and other minor works to a specified design finish. CPCCCO2003A Carry out concreting to simple forms; OR BCGCO2003B Carry out concreting to simple forms The unit includes positioning the truck, placing concrete from truck to work area, spreading concrete and cleaning up site. This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 5 of 10

6 CORE UNITS in CPC31511 UNIT OUTLINE TRANSFER ELIGIBLE CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry Formwork construction field of work CPCCCA2003A dismantle formwork for footings and slabs on ground CPCCCA3018A Construct, erect and dismantle formwork for stairs and ramps CPCCCA3019A dismantle formwork to suspended slabs, columns, beams and walls outcomes required to carry out OHS requirements through safe work practices at any on or off-site construction workplace. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others. outcomes required to erect and dismantle formwork to footings and slabs on ground, to establish levels and contain finished concrete. It includes forming basic slabs and forming rebates to slabs on ground and steps to strip footings. outcomes required to construct, erect and dismantle formwork for stairs and ramps to form up the concrete that may involve one or more flights in order to provide access between floors and/or landings. It includes timber, metal or prefabricated formwork. outcomes required to erect and dismantle formwork to suspended slabs, columns, beams and walls to contain concrete in above ground construction. It includes timber, metal or prefabricated formwork of modular or in situ design. CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground CPCCCA3018A Construct, erect and dismantle formwork for stairs and ramps CPCCCA3019A Erect and dismantle formwork to suspended slabs, columns, beams and walls NIl This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 6 of 10

7 ELECTIVE UNIT DETAILS Elective units Unit outline Credit Transfer Eligible Elective units (6 Electives required) BSBSMB301A Investigate micro business opportunities BSBSMB406A Manage small business finances This unit describes the performance outcomes, skills and knowledge required to develop business ideas, and to investigate market needs and factors affecting potential markets. Specific legal requirements apply to the management of a micro business. This unit describes the performance outcomes, skills and knowledge required to implement, monitor and review strategies for the ongoing management of a small business's finances. It also includes day to day financial management of the small business. Specific legal requirements apply to the management of a small business. BSBSMB301A Investigate micro business opportunities BSBSMB406A Manage small business finances A maximum of two of the six required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package. CPCCCA3014A Construct bulkheads outcomes required to construct bulkheads to conceal services or for decorative purposes. It includes straight, curved and geometric shaped bulkheads, generally constructed in situ and includes prefabricated fitments. CPCCCA3014A Construct CPCCCA3015A Assemble partitions outcomes required to set out and assemble partitions for the purpose of dividing areas into useable spaces. It includes prefabricated and demountable partitions constructed of timber or metal. CPCCCA3015A Assemble partitions CPCCCA3016A Construct timber external stairs outcomes required to construct and install timber external stairs that may involve one or more flights, to provide access into a structure. It includes timber CPCCCA3016A Construct timber external stairs This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 7 of 10

8 Elective units Unit outline Credit Transfer Eligible treads and stringers. CPCCCA3020A dismantle jump form formwork outcomes required to erect and dismantle jump form formwork to form wall structures where the formwork process is continuous. It includes curved or straight jump form formwork. CPCCCA3020A dismantle jump form formwork CPCCCA3021A dismantle slip form formwork outcomes required to erect and dismantle slip form formwork to form wall structures where the formwork process is continuous. It includes curved or straight slip form formwork. CPCCCA3021A dismantle slip form formwork CPCCCA3022A Install curtain walling outcomes required to fit and fix curtain walling facades to multi-storey structures to provide external cladding of structural steel or reinforced concrete. It includes fabricated frameworks with metal cladding, fabricated framework with glass panels, pre-cast concrete panels, and manufactured and natural stone products in or on the structure. CPCCCA3022A Install curtain walling CPCCCM3001C Operate elevated work platforms outcomes required to safely and effectively operate some types of elevated work platforms (EWPs) in a variety of different terrains and situations to access isolated work areas. The unit includes locating, setting up, operating and shutting down EWPs. CPCCCM3001C Operate elevated work platforms CPCCSF2003A Cut and bend materials using oxy-lpg equipment outcomes required to heat, cut and bend construction materials using oxy-lpg equipment. It includes planning and preparation for the work, setting up and testing the equipment, cutting materials, heating and bending materials, shutdown of equipment and completion of clean-up activities. CPCCSF2003A Cut and bend materials using oxy-lpg equipment CPCCSF2004A Place and fix reinforcement materials outcomes required to place and fix reinforcement for concrete work as part of construction processes. It includes planning and preparation for the work, final preparation for placement, placing and fixing reinforcement, checking the reinforcement and completing clean-up activities. CPCCSF2004A Place and fix reinforcement materials This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 8 of 10

9 Elective units Unit outline Credit Transfer Eligible CPCCWC3003A Install dry wall passive fire-rated systems outcomes required to select and install dry wall fire-rated systems to walls and ceilings. It includes planning and preparation for installation; installation of approved systems for timber stud walls, steel stud partitions, shaft walls, timber joist and suspended ceilings; and completion of post-installation activities. CPCCWC3003A Install dry wall passive fire-rated systems RIICCM210D Install trench support outcomes required to shore a trench to prevent the collapse of trench walls and provide safety to personnel working in the trench. It includes the minimum criteria for competency assessment. This unit includes the set out, installation and removal of shoring. RIICCM210D Install trench support; OR RIICCM210A Install trench support RIIWHS202D Enter and work in confined spaces RIIWMG203D Drain and dewater civil construction site This unit describes a participant s skills and knowledge required to enter and work in confined spaces in the Resources and Infrastructure Industries. This unit is appropriate for those working in operational roles undertaking work in confined spaces. This unit develops a participant s skills and knowledge required to drain and dewater civil construction sites in Civil construction. This unit is appropriate for those working in operational roles. RIIWHS202D Enter and work in confined spaces; OR RIIOHS202A Enter and work in confined spaces RIIWMG203D Drain and dewater civil construction site; OR RIIWMG203A Drain and dewater civil construction site CPPCMN3001B Participate in environmentally sustainable work practices outcomes required to participate in environmentally sustainable work practices. The unit requires the ability to identify current resource usage in the workplace and contribute to ensuring compliance with legislative requirements. It also requires the capacity to contribute to improvements in sustainable work practices. It is essential that the organisation s approach to ensuring environmentally sustainable work practices, and the benefits that they bring, are understood. The unit must be applied strictly according to relevant state or territory legislative and industry requirements. CPPCMN3001B Participate in environmentally sustainable work practices This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 9 of 10

10 Elective units Unit outline Credit Transfer Eligible BSBSMB401A Establish legal and risk management requirements of small business This unit describes the performance outcomes, skills and knowledge required to identify and comply with the regulatory, legal, taxation and insurance requirements, and risk management needs of small business. Specific legal requirements apply to the management of a small business. BSBSMB401A Establish legal and risk management requirements of small business This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 10 of 10