FACT SHEET CPC CERTIFICATE III IN CONSTRUCTION WATERPROOFING

Transcription

1 FACT SHEET CPC CERTIFICATE III IN CONSTRUCTION WATERPROOFING This program covers building theory and practices related to residential and commercial applications. This program will provide you with the knowledge and skills to meet the technical qualifications for the qualification of Construction Waterproofing. Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a work site. Achievement of unit CPCCOHS1001A covers this requirement. Qualification Pathways Entry Requirements Study Duration and Enrolment Periods Mode of Delivery Cost How to Enrol Upon successful completion of this qualification you will receive a Certificate III in Construction Waterproofing CPC After successful completion of CPC31411 Certificate III in Construction Waterproofing, you may continue with your studies by enrolling in: Managerial Course: (NOTE: BSBSMB401A Establish legal and risk management requirements of small business can be taken as an Elective in CPC31411 Certificate III in Construction Waterproofing as assisting in starting up your Carpentry business). Queensland specific. CPC40110 Certificate IV in Building & Construction (Building). (One Certificate III competency counts towards the Certificate IV program) (Builder Low Rise license - QLD only) CPC50210 Diploma of Building & Construction (Building) (Building Practitioner Registration Western Australia only) CPC50210 Diploma of Building & Construction (Building) (Builder Medium Rise license - QLD only) Career opportunities include employment as a: Construction Waterproofer This qualification does not have any specific entry requirements. However, completion of Year 12 English and Mathematics is recommended. Enrolments are taken on an ongoing basis. Students can enrol at any time 24/7 online, over the phone or in person during business hours. Enrolment is for a period of 12 months. NOTE: Keystone Training delivers this qualification by Recognition of Prior Learning (RPL) and/or Gap Training - NOT FULL TRAINING. The candidate requires a minimum of 3 to 4 years experience within this trade. (Please enquire for verification). Flexible Delivery - Online with face to face/phone/ /online Tutorial support, Face to Face, Distance delivery with face to face/phone/ /online Tutorial. NOTE: Practical training consists of On the Job training and applicants who wish to train with Keystone Training MUST have access to all physical resources. All enrolment fees are inclusive of RPL, learner resources, assessment trainer tutorials, access to internet and issuing of qualification. Please to the Price List section for fee structure. NOTE: This program is conducted by a combination of RPL and gap training. To enrol in this mode of delivery and assessment you MUST be currently working in the building and industry performing type work with a minimum of 3 to 4 years current experience. NOTE: Practical Training consists of On the Job gap training and therefore applicants who wish to train with Keystone Training MUST have access to all physical resources. To enrol in this qualification please contact Keystone Training. Prior to enrolment a This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 1 of 8

2 copy of the Student Handbook is available via download or via contacting our office. Recognition of Prior Learning Credit Transfers Learning Support Work Health & Safety Contact Us Applicants may receive acknowledgment of their knowledge and experiences through RPL. Evidence for RPL may include: work experience life experiences (including voluntary work and leisure pursuits) previous study e.g. qualifications, industry training professional development programs or units The matrix below is a guide for previously gained Units of Competency in CPC Keystone Training supports many learning needs. Reasonable adjustments can be made to assist students in achieving a competent result where learning difficulties may be present. For students needing additional Language, Literacy and Numeracy support Keystone recommends Fruition Tuition contact details are contact no Keystone Training offers support via many modes including face to face tutorials, Skype, and phone. Refer to the Student Handbook for detailed information on support offered by Keystone Training. Please note that CPC31411 Certificate III in Construction Waterproofing has practical units (On the Job), therefore students must have access to the appropriate personal protective equipment to perform all practical tasks. If you would like additional information about this qualification, or about any of the wide range of qualifications offered by Keystone Training, you can visit our website or contact us via: Office: Monday to Friday: 8.30am to 4.30pm; Fax: (07) Street Address: Units 36 & 37, 17 Cairns Street, Loganholme 4129 Postal Address: PO Box 4262, Eight Mile Plains QLD admin@keystonetraining.com.au To Achieve the Qualification CPC31411 CERTIFICATE III IN CONSTRUCTION WATERPROOFING requires the successful completion of ALL 14 Core & 5 Elective Units of Competency (19 in Total) listed in COLUMN 1. TRANSFER & ELIGIBILITY FOR in CPC31411 Certificate III in Construction Waterproofing. If you have successfully completed ANY of the following Units of Competency or Qualifications listed in columns 3 OR 4 and you can produce copies of your qualification you will NOT have to enrol in the corresponding Unit of Competency in COLUMN 1 to complete the full Qualification because you will be given Credit for that Unit. Evidence of your Qualification could include: Certificates and Academic Transcripts from the Registered Training Organisation who issued the qualification. NOTE: You cannot Credit Transfer in ALL of the Qualification; a minimum of ONE Unit MUST be Completed to achieve the Qualification (Contact Keystone Training to discuss the one Unit to enrol in). This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 2 of 8

3 CORE UNITS in CPC31311 UNIT OUTLINE TRANSFER ELIGIBLE CPCCCM1012A Work effectively and sustainably in the industry CPCCCM1013A Plan and organise work CPCCCM1014A Conduct workplace communication CPCCCM1015A measurements and calculations CPCCCM2001A Read and interpret plans and specifications outcomes required to prepare for and sustain effective work within the industry. It covers the identification and clarification of the industry work context, scope and employment conditions, responsibility required to be accepted by the individual, working in a team, individual career path improvement activities and sustainable work practices and techniques. outcomes required to plan and organise individual and group work activities on a site. The unit includes identifying task requirements, planning steps and organising work. outcomes required to communicate effectively with other workers in a workplace environment. It includes gathering, conveying and receiving information through verbal and written forms of communication. outcomes required to carry out measurements and perform simple calculations to determine task and material requirements for a job in a work environment. outcomes required to read and interpret plans and specifications relevant to operations. It includes the identification of types of plans and drawings and their functions, the recognition of commonly used symbols and abbreviations, the identification of key features and specifications on a site plan, the comprehension of written job specifications and the recognition of document status and amendment detail. CPCCCM1012A Work effectively and sustainably in the industry CPCCCM1013A Plan and organise work CPCCCM1014A Conduct workplace communication CPCCCM1015A measurements and calculations CPCCCM2001A Read and interpret plans and specifications This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 3 of 8

4 CORE UNITS in CPC31311 CPCCOHS2001A Apply OHS requirements, policies and procedures in the industry UNIT OUTLINE TRANSFER ELIGIBLE outcomes required to carry out OHS requirements through safe work practices at any on or off-site workplace. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others. Waterproofing preparation field of work CPCCWP2001A Handle materials CPCCWP2002A Use tools and equipment CPCCWP2003A Prepare for process CPCCWP2004A Prepare surfaces for application outcomes required to safely handle materials manually and mechanically, including their storage requirements. It includes the preparation, handling, sorting, stacking and disposal of products, materials and components in the application of systems, including the disposal of waste. outcomes required to safely and effectively use tools and equipment used in. It includes identification, selection and use of hand and power tools, plant and equipment used in masonry work. outcomes required to apply to differing types of wet areas in varying building situations. It includes identification of the processes required and planning and preparation of materials for application. outcomes required to repair and prepare different material surfaces that form part of the application of within the process. It includes the inspection, preparation for, and repair and finishing of surfaces prior to the application of the process. CPCCOHS2001A Apply OHS requirements, policies and procedures in the industry CPCCWP2001A Handle materials CPCCWP2002A Use tools and equipment CPCCWP2003A Prepare for process CPCCWP2004A Prepare surfaces for application This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 4 of 8

5 CORE UNITS in CPC31311 Waterproofing operations field of work CPCCWP3001A Apply process to below ground level wet areas CPCCWP3002A Apply process to internal wet areas CPCCWP3003A Apply process to external wet areas CPCCWP3004A Apply remedial processes UNIT OUTLINE TRANSFER ELIGIBLE outcomes required to apply practices and principles to wet areas below ground level. It includes identification of the system to be used, its preparation and its application. outcomes required to apply practices and principles to internal wet areas. It includes identification of the system to be used, its preparation and its application. outcomes required to apply practices and principles to external wet areas. It includes identification of the system to be used, its preparation and its application. outcomes required to apply remedial processes to external and below ground level wet areas, using injection epoxy, cement crystallisation or hydrostatic coating methods. It includes identification of the system to be used, its preparation and its application. CPCCWP3001A Apply process to below ground level wet areas CPCCWP3002A Apply process to internal wet areas CPCCWP3003A Apply process to external wet areas CPCCWP3004A Apply remedial processes This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 5 of 8

6 ELECTIVE UNIT DETAILS Elective units Unit outline Credit Transfer Eligible Elective units (5 Electives required) BSBSMB301A Investigate micro business opportunities BSBSMB406A Manage small business finances. CPCCCM2002A excavation This unit describes the performance outcomes, skills and knowledge required to develop business ideas, and to investigate market needs and factors affecting potential markets. Specific legal requirements apply to the management of a micro business. This unit describes the performance outcomes, skills and knowledge required to implement, monitor and review strategies for the ongoing management of a small business's finances. It also includes day to day financial management of the small business. Specific legal requirements apply to the management of a small business. outcomes required to undertake hand excavation tasks and excavations requiring the assistance of plant machinery to form excavations for footings, and the provision of services. It includes excavation to new and existing sites, and new services or the diversion of existing services. BSBSMB301A Investigate micro business opportunities BSBSMB406A Manage small business finances CPCCCM2002A excavation A maximum of two of the five required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV qualification or qualification in another endorsed Training Package. This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 6 of 8

7 Elective units Unit outline Credit Transfer Eligible CPCCCM2006B Apply basic levelling procedures outcomes required to carry out levelling in a single plane for the purposes of establishing correct and accurate set of building components. It includes the set up, testing and use of levelling devices, and establishing and transferring heights using a range of levelling equipment. CPCCCM2006B Apply basic levelling procedures; OR CPCCCM2006A Apply basic levelling procedures CPCCCM2007B Use explosive power tools CPCCCM2008B Erect and dismantle restricted height scaffolding CPCCCM2009A basic demolition CPCCCM2010B Work safely at heights This unit of competency supports achievement of skills to safely and effectively use a range of EPT used in the industry. outcomes required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications. It includes placement of safety barriers and only involves modular scaffolding restricted to a height of 4 metres. outcomes required to remove components from single storey buildings and structures using basic demolition techniques. It includes the preparation of the site for the demolition process and the removal of components. outcomes required to work safely on sites where the work activity involves working above 1.5 metres from ground level and where fall protection measures are required. CPCCCM2007B Use explosive power tools; OR CPCCCM2007A Use explosive power tools CPCCCM2008B Erect and dismantle restricted height scaffolding; OR CPCCCM2008A Erect and dismantle restricted height scaffolding CPCCCM2009A basic demolition CPCCCM2010B Work safely at heights; OR CPCCCM2010A Work safely at heights This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 7 of 8

8 Elective units Unit outline Credit Transfer Eligible CPCCCM3001C Operate elevated work platforms CPCCCO2013A concreting to simple forms CPCCSH2003A Apply and install sealant and sealant devices CPPCMN3001B Participate in environmentally sustainable work practices BSBSMB401A Establish legal and risk management requirements of small business outcomes required to safely and effectively operate some types of elevated work platforms (EWPs) in a variety of different terrains and situations to access isolated work areas. The unit includes locating, setting up, operating and shutting down EWPs. In addition to achievement of this competency, an EWP operator may need to obtain additional certification of training and experience before being allowed to operate the equipment. outcomes required to safely install formwork, reinforcement and place and finish concrete for the of minor slabs, pathways and other minor works to a specified design finish. The unit includes positioning the truck, placing concrete from truck to work area, spreading concrete and cleaning up site. This unit specifies the outcomes required to apply sealants and sealant devices to structures. outcomes required to participate in environmentally sustainable work practices. The unit requires the ability to identify current resource usage in the workplace and contribute to ensuring compliance with legislative requirements. It also requires the capacity to contribute to improvements in sustainable work practices. It is essential that the organisation s approach to ensuring environmentally sustainable work practices, and the benefits that they bring, are understood. The unit must be applied strictly according to relevant state or territory legislative and industry requirements. This unit describes the performance outcomes, skills and knowledge required to identify and comply with the regulatory, legal, taxation and insurance requirements, and risk management needs of small business. Specific legal requirements apply to the management of a small business. CPCCCM3001C Operate elevated work platforms; OR CPCCCM3001B Operate elevated work platforms CPCCCO2013A concreting to simple forms CPCCSH2003A Apply and install sealant and sealant devices CPPCMN3001B Participate in environmentally sustainable work practices; OR CPPCMN3001A Participate in environmentally sustainable work practices BSBSMB401A Establish legal and risk management requirements of small business This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 8 of 8