Plywood, Composite Wood Products, High-Pressure Laminates
|
|
- Meagan Della Brooks
- 5 years ago
- Views:
Transcription
1 Section 5 Plywood, Composite Wood Products, High-Pressure Laminates Contents American Plywood Association (APA) grading guidelines Plywood types and typical applications APA-registered trademarks explained Plywood veneer grades Exposure ratings (Exposure 1 and 2) Plywood species group numbers Chart of classification of species Variety of surface textures available on APA-rated siding Plywood panel dimensions (U.S. customary and metric) Span tables for plywood sheathing and subfloors Recommended spans for roof sheathing and fastening schedules Recommended spans for roof decks low slopes Stiffener load-span tables for preframed APA panel roof decks Plywood thickness and maximum spans for roof decks under special coatings Spans for open soffit or combined roof decking and ceiling Spans for closed soffit or nonstructural ceilings Plywood supports for uniformly loaded heavy duty floors Plywood recommendations for floor carrying fork-truck traffic Recommended shear for horizontal APA panel diaphragms with wood framing Recommended shear for APA panel shear walls with wood framing for wind or seismic loading Allowable spans for APA I-Joists simple- and multiple-span applications Typical plywood sheathing construction One-hour fire-rated exterior loadbearing wall assembly illustrated One-hour fire-rated glulam beam assembly APA rated siding over nailable sheathing recommendations/illustrations Panel siding joint details diagrammed Recommended procedures for applying stucco over APA panel sheathing APA panel corner bracing illustrated Brick veneer application over plywood sheathing APA panel subflooring maximum span, fastening tables and diagrams 327
2 328 Section One-hour fire-rated combustible floor/ceiling assemblies Interior plywood paneling span, fastening schedules APA panel stair treads and riser applications APA plywood systems for ceramic tile flooring Fully wind-resistive roof assemblies Recommended roof loads for APA rated sheathing with strength axis parallel to supports Preframed roof panels Roof sheathing construction details Heavy timber roof construction utilizing plywood Open and closed soffit construction details utilizing plywood Plywood as roof support for metal roof panels Noise resistance plywood floor construction details APA siding face grades and metric conversions Thermal resistance of wood structural panels Average U values of APA panel roof decks STC 46 party wall construction APA-rated sturdi-floor subfloor and floor framing for hardwood floors Composite wood products Hardboard (compressed fiberboard) Cellulosic fiberboard (softboard) Oriented Strand Board (OSB) Waferboard Laminated Veneer Lumber (LVL) Parallel-strand lumber (PSL) Oriented Strand Lumber (OSL) Com-ply Medium-density fiberboard (MDF) MDF product certifications and uses MDF raw material composition MDF wood and vinyl veneers and dimensional characteristics Dimensional stability as critical factor Particleboard and MDF grades and property requirements Effect of moisture on cross lamination of veneered lumber products Moisture content of particleboard and the impact on warpage Moisture content zones in the U.S Particleboard and MDF dimensional changes compared to wood Dimensional changes in MDF and industrial-grade particleboard (PBI) Ideal fabrication conditions chart Selecting substrates handling and storage suggestions Use of particleboard as underlayment Placement of various types of flooring over particleboard underlayment Particleboard for stepping MDF moldings and millwork Saw/cutting, installing MDF moldings, and millwork Glulams Camber in glulam beams Glulam sizes and weights Equivalent Douglas Fir glulam sections as substitutes for sawn lumber Glulam beam bearings end wall, masonry wall Glulam bearings at end walls with steel tie and cap plates Continuous glulam beam over intermediate steel column Glulam beams butting over intermediate wood supports Beam size change over intermediate support Glulam continuous floor beam over intermediate wood supports Glulams as garage door headers Rafter to beam framing I-joist series size, depth, flange width I-joists bearing on floor beams Beam support at end wall with floor I-joists I-joists mounted flush with floor beam Lumber joists bearing on floor beam High-pressure laminate (HPL) Q&A HPL tips for avoiding panel warpage HPL stress crack avoidance HPL post-forming countertops HPL post-forming countertops (manual techniques) Common post-forming problems HPL decorative laminate summary table How to laminate a countertop How to install a countertop Low-pressure laminates (LPL) Cabinet joinery details Wood trim and molding profiles
3 Plywood, Composite Wood Products, High-Pressure Laminates 329 Used as sheathing, flooring, in the production of cabinetry, and millwork, plywood and composite wood products play a key role in the construction industry American Plywood Association (APA) Grading Guidelines The American Plywood Association, headquartered in Tacoma, Washington, establishes grades and specifications for plywood products. The National Particleboard Association, located in Gaithersburg, Maryland, is the authority on composite wood products. Plywood Similar to the grading agencies for Western wood products and Southern pine lumber, the American Plywood Association (APA) provides the industry with specification guidelines and grade stamps by which to identify these grades. The term grade can apply to the type of veneer being used or the use for which the panel is best suited Plywood Types and Typical Applications Where interior usage for cabinetry, shelving, built-ins, and so forth, is required, APA-Sanded and Touch-Sanded designations apply: A-A For use where appearance on both sides is important. A-B For use where appearance on only one side is important, but where two solid sides are required. A-C For use where appearance on one side is important in exterior applications, such as soffits, truck lining, and structural uses. A-D For use where appearance on one side is important in interior applications, such as paneling and partitions. B-B Utility panel with two sides. Interior use primarily; limited exterior use. B-C Utility panel for farm-service work, box cars, and truck linings for exterior use. B-D Utility panel for backing, sides of built-ins, separator boards, and slip sheets for interior and exterior use. C-C plugged For use as an underlayment over structural subfloor, pallet fruit bins, and for use in areas to be covered by carpet. C-D plugged For open soffits, cable reels, walkways, interior, or protected applications. Not to be used as underlayment. Underlayment For application over structural subfloor, it provides a smooth surface for carpet and, touch sanded, for resilient floors. Specialty Panels APA high-density overlay (HDO) Manufactured with a semi-opaque resin-fiber overlay on both sides. It is used for concrete forms, industrial bins, and exhaust ducts. APA marine Plywood made only with Douglas fir or Western larch have highly restrictive limitations on core gaps and face repairs. As the name implies, it is ideal for boat hulls and other marine uses. APA B-B plyform Class 1 Used for concrete formwork and designed for multi-use applications. APA medium-density overlay MDO Made with a smooth, opaque, resin-treated fiber overlay, producing an ideal base for finish painting, signs, and shelving. APA decorative Plywood with a rough-sawn, brushed, and grooved surface for interior accent walls, paneling, exhibit displays, etc.
4 330 Section 5 APA plyron Plywood with a hardboard face adhered on both sides, for countertops, cabinet doors, and shelving. Plyform Exterior-grade plywood used for concrete forms. B-B plyform It has a smooth, solid surface. It can be re-used many times. B-C EXT Sanded panel used where only one smooth side is needed. HDO plyform High-density overlay with hard, semi-opaque resin-fiber finish. Resists abrasion up to 200 re-uses. Requires a release agent. Structural 1 plyform Stronger and stiffer than B-B and HDO. Recommended for high-pressure applications APA-Registered Trademarks Explained (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
5 Plywood, Composite Wood Products, High-Pressure Laminates Plywood Veneer Grades (By permission of APA, The Engineered Wood Association, Tacoma, Washington.) Exposure Ratings (Exposure 1 and 2) Exposure 1 is for exterior use and has a fully waterproof bond designed for applications where the plywood will be permanently exposed to the weather or to moisture. Plywood so designated is stamped Exposure 1. Exposure 2 is for protected construction applications and is constructed with intermediate glue. This product is identified as Exposure 2 on the ADA grade stamp Plywood Species Group Numbers Plywood manufactured in accordance with U.S. Product Standard (PS) 183 can be made of more than 70 species of wood and these species are divided into 5 groups. Group 1 is the strongest and stiffest and Group 5 the least strong and least stiff.
6 332 Section Chart of Classification of Species (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
7 Plywood, Composite Wood Products, High-Pressure Laminates Variety of Surface Textures Available on APA-Rated Siding (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
8 334 Section Variety of Surface Textures Available on APA-Rated Siding Continued (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
9 Plywood, Composite Wood Products, High-Pressure Laminates Plywood Panel Dimensions (U.S. Customary and Metric) (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
10 336 Section Span Tables for Plywood Sheathing and Subfloors (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
11 Plywood, Composite Wood Products, High-Pressure Laminates Recommended Spans for Roof Sheathing and Fastening Schedules (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
12 338 Section Recommended Spans for Roof Decks Low Slopes Stiffener Load-Span Tables for Preframed APA Panel Roof Decks
13 Plywood, Composite Wood Products, High-Pressure Laminates Plywood Thickness and Maximum Spans for Roof Decks Under Special Coatings Spans for Open Soffit or Combined Roof Decking and Ceilings
14 340 Section Spans for Closed Soffit or Nonstructural Ceilings Plywood Supports for Uniformly Loaded Heavy Duty Floors
15 Plywood, Composite Wood Products, High-Pressure Laminates Plywood Recommendations for Floor Carrying Fork-Truck Traffic
16 342 Section Recommended Shear for Horizontal APA Panel Diaphragms with Wood Framing
17 Plywood, Composite Wood Products, High-Pressure Laminates Recommended Shear for APA Panel Shear Walls with Wood Framing for Wind or Seismic Loading
18 344 Section Allowable Spans for APA I-Joists Simple- and Multiple-Span Applications
19 Plywood, Composite Wood Products, High-Pressure Laminates Typical Plywood Sheathing Construction (By permission of APA, The Engineered Wood Association, Tacoma, Washington.)
20 346 Section One-Hour Fire-Rated Exterior Load-Bearing Wall Assembly Illustrated One-Hour Fire-Rated Glulam Beam Assembly
21 Plywood, Composite Wood Products, High-Pressure Laminates APA Rated Siding Over Nailable Sheathing Recommendations/Illustrations
22 348 Section Panel Siding Joint Details Diagrammed
23 Plywood, Composite Wood Products, High-Pressure Laminates Recommended Procedures for Applying Stucco Over APA Panel Sheathing
24 350 Section APA Panel Corner Bracing Illustrated Brick Veneer Application Over Plywood Sheathing
25 Plywood, Composite Wood Products, High-Pressure Laminates APA Panel Subflooring Maximum Span, Fastening Tables and Diagrams
26 352 Section One-Hour Fire-Rated Combustible Floor/Ceiling Assemblies
27 Plywood, Composite Wood Products, High-Pressure Laminates Interior Plywood Paneling Span, Fastening Schedules APA Panel Stair Treads and Riser Applications
28 354 Section APA Plywood Systems for Ceramic Tile Flooring
29 Plywood, Composite Wood Products, High-Pressure Laminates Fully Wind-Resistive Roof Assemblies
30 356 Section Recommended Roof Loads for APA Rated Sheathing with Strength Axis Parallel to Supports Preframed Roof Panels
31 Plywood, Composite Wood Products, High-Pressure Laminates Roof Sheathing Construction Details
32 358 Section Heavy Timber Roof Construction Utilizing Plywood
33 Plywood, Composite Wood Products, High-Pressure Laminates Open and Closed Soffit Construction Details Utilizing Plywood
34 360 Section Plywood as Roof Support for Metal Roof Panels Noise Resistance Plywood Floor Construction Details
35 Plywood, Composite Wood Products, High-Pressure Laminates APA Siding Face Grades and Metric Conversions
ENGINEERED WOOD CONSTRUCTION GUIDE
ENGINEERED WOOD CONSTRUCTION GUIDE Engineered Wood Construction Guide 2 A few facts about wood. WOOD The Miracle Material Engineered wood products are a good choice for the environment. They are manufactured
More informationFraming Methods Structural Components
Framing Methods Structural Components Balloon Framing *Balloon framing or Eastern framing the exterior studs run from the top of the foundation to the top of the highest level. Benefits of this type of
More informationENGINEERED WOOD CONSTRUCTION GUIDE
ENGINEERED WOOD CONSTRUCTION GUIDE Note: This version is superseded by a more current edition. Check the current edition for updated design and application recommendations. 2003 ALL RIGHTS RESERVED. ANY
More informationSECTION WOOD FRAMING. A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06110 WOOD FRAMING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But Not Supplied
More informationTimber products used to build U.S. single-family houses in 1988
Timber products used to build U.S. single-family houses in 1988 David B. McKeever Robert G. Anderson Abstract Large volumes of lumber and panel products are used annually to build new single-family houses
More informationSECTION WOOD FRAMING. A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents.
SECTION 06 1100 WOOD FRAMING PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install wood framing and blocking as described in Contract Documents. B. Products Installed But
More informationPart 1: Vocabulary Select the best answer and write the corresponding letter in the space provided.
Name: Date: References: Architecture: Residential Drafting and Design (Chapter 18) at http://www.g wonlinetextbooks.com/. ***Use the classroom Username and Password to access the textbook, not your personally
More informationEngineered Wood CONSTRUCTION GUIDE
Engineered Wood CONSTRUCTION GUIDE Wood: The Natural Choice Engineered wood products are among the most beautiful and environmentally friendly building materials. In manufacture, they are produced efficiently
More informationThe Engineered Wood Association DESIGN/CONSTRUCTION GUIDE NONRESIDENTIAL ROOF SYSTEMS
A P A The Engineered Wood Association DESIGN/CONSTRUCTION GUIDE NONRESIDENTIAL ROOF SYSTEMS 1996 APA THE ENGINEERED WOOD ASSOCIATION ALL RIGHTS RESERVED. ANY COPYING, MODIFICATION, DISTRIBUTION OR OTHER
More informationAraucoPly panels offer. Versatility Strength with Lighter Weight High Quality Panel Construction. Light Uniform Color and Easy Workability
AraucoPly panels offer Versatility Strength with Lighter Weight High Quality Panel Construction Light Uniform Color and Easy Workability Quality Forever We control every step of the process. Arauco is
More informationCarpentry. The following describes the scope and sequence of instruction for Carpentry.
Carpentry The Montgomery County Students Construction Trades Foundation, Inc has developed a comprehensive construction technology program designed to prepare students for a rewarding career in the construction
More informationDIVISION 06 WOOD, PLASTICS, AND COMPOSITES
DIVISION 06 WOOD, PLASTICS, AND COMPOSITES 06 00 00 WOOD, PLASTICS, AND COMPOSITES 06 01 00 Maintenance of Wood, Plastics, and Composites 06 01 10 Maintenance of Rough Carpentry 06 01 10.71 Rough Carpentry
More informationR-Matte Plus-3: Insulation for the Building Envelope
Attic and Crawl Space Applications R-Matte Plus-3 may be applied to the interior face of stud walls or roof rafters within attics and crawl spaces to provide a layer of continuous insulation (ci). Simply
More informationWOOD I-JOIST AWARENESS GUIDE
WOOD I-JOIST AWARENESS GUIDE American Wood Council Flange Web Flange American Forest & Paper Association WOOD I-JOIST AWARENESS GUIDE The American Wood Council is part of the wood products group of the
More informationCarroll County Bureau of Permits and Inspection Residential Code Compliance Guidelines Detached Garage
Carroll County Bureau of Permits and Inspection Residential Code Compliance Guidelines Detached Garage The following list of code requirements is intended to assist you in complying with the Code of Public
More informationLVL Product Guide 2.0E LVL 1.5E LVL
LVL Product Guide 2.0E LVL 1.5E LVL Our Company Anthony Forest Products Company, a family-owned business founded in 1916, is headquartered in El Dorado, Arkansas. The company operates a southern pine lumber
More informationLP OSB Sheathing & Structural 1 Sheathing
Rated OSB Sheathing Roof Panels Span Ratings Max. Live Load Thickness Span Rating for Roofs (lbs)** 3/8" 24/0 30 7/16" 24/16 40 15/32" 32/16 70 1/2" 32/16 70 19/32" 40/20 130 23/32" 48/24 175 1-1/8" 48
More informationPLYWOOD FLOATING FLOOR
PLYWOOD FLOATING FLOOR Read First These suggestions represent generally accepted procedures for successful installation of Enka Building Products. These instructions may be followed, modified, or rejected
More informationExplaining PS 1 and PS 2 Gradestamps
Explaining PS 1 and PS 2 Gradestamps Gradestamps are applied to structural panels (OSB and plywood) to provide a variety of information to buyers and users. The information may appear to be complicated
More informationPRP-108 Performance Standards and Policies for Structural-Use Panels
A P A S T A N D A R D PRP-108 Performance Standards and Policies for Structural-Use Panels Published by APA The Engineered Wood Association February 1994 A P A The Engineered Wood Association 1997 APA
More informationPFC-5804* Reissued February 1, Filing Category: DESIGN Wood
PFC-50* Reissued February 1, 2003 ICBO Evaluation Service, Inc. 530 Workman Mill Road, Whittier, California 9001 www.icboes.org Filing Category: DESIGN Wood PACIFIC WOODTECH CORPORATION PWI JOISTS PACIFIC
More informationICBO Evaluation Service, Inc Workman Mill Road, Whittier, California *Revised April 2003
PFC-5804* Reissued February 1, 2003 ICBO Evaluation Service, Inc. 5360 Workman Mill Road, Whittier, California 90601 www.icboes.org Filing Category: DESIGN Wood PACIFIC WOODTECH CORPORATION PWI JOISTS
More informationAnchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi
STRUCTURAL NOTES MATERIAL STRENGTHS Structural Steel Reinforcing Steel Concrete Masonry Structural Lumber Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel
More informationSpecifications. Materials and Fabrication. Physical Properties. Environmental Impact. Sizes. Installation - General Requirements.
Specifications Materials and Fabrication Physical Properties LP FlameBlock Fire-Rated OSB Sheathing panels are made of oriented strand board (OSB) with a fire-resistant, cementitious coating (Pyrotite
More informationtwelve wood construction: materials & beams ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture twelve wood construction: materials & beams Wood Beams 1 Wood Beam Design National Design Specification National
More informationHigh Performance Walls:
High Performance Walls: Advanced Framing Walls Systems and Insulated Headers Karyn Beebe, PE, LEED AP APA The Engineered Wood Association Quality Services Division Technical Services Division Field Services
More informationHigh Performance Walls:
High Performance Walls: Advanced Framing Walls Systems and Insulated Headers Karyn Beebe, PE, LEED AP APA The Engineered Wood Association Quality Services Division Technical Services Division Field Services
More informationTable R (1) Allowable Spans and Loads for Wood Structural Panels for Roof and Subfloor. Sheathing and Combination Subfloor Underlayment
City of Republic - Community Development Department Roof and Subfloor Sheathing Spans Revision Date: January 2017 Table R503.2.1.1(1) Allowable Spans and Loads for Wood Structural Panels for Roof and Subfloor
More informationCOPYRIGHTED MATERIAL. Contents. 1 Making Buildings 3. 3 Wood Foundations and. Preface to the Sixth Edition xi. Sitework 31
Contents Preface to the Sixth Edition xi 1 Making Buildings 3 Learning to Build 4 Buildings and the Environment 5 The Work of the Design Professional 11 The Work of the Construction Professional 19 Trends
More informationSDPWS. Special Design Provisions for Wind & Seismic 2015 EDITION
SDPWS Special Design Provisions for Wind & Seismic 2015 EDITION ANSI/AWC SDPWS-2015 Approval date September 8, 2014 Updates and Errata While every precaution has been taken to ensure the accuracy of this
More informationFIGURE R502.2 FLOOR CONSTRUCTION
CHAPTER 5 FLOORS 11 I SECTION R501 GENERAL R501.1 Application. The provisions of this chapter shall control the design and construction of the floors for all buildings including the floors of attic spaces
More informationIntroducing TJ Insulated Structural Framing Components
#TJ-9009 SPECIFIER S GUIDE TJ INSULATED HEADERS, RIM BoaRD, AND CORNERS Introducing TJ Insulated Structural Framing Components Helps meet the 2011 Federal Energy Star Homes and 2009 International Energy
More informationChapter 23: Wood 2015 INTERNATIONAL BUILDING CODE COMMENTARY 23-1
Chapter 23: Wood General Comments This chapter contains information required to design and construct buildings or structures that include wood or wood-based structural elements, and is organized around
More informationWHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED.
WHATEVER THE CHALLENGE, PHILLIPS HAS YOU COVERED. Build walls and ceilings with a strong base, sturdy reinforcements and much more with Phillips extensive line of high quality products. As a single source
More informationWIND & SEISMIC 2008 EDITION ASD/LRFD WITH COMMENTARY. American Forest & Paper Association. American Wood Council ANSI/AF&PA SDPWS-2008
2008 EDITION ANSI/AF&PA SDPWS-2008 Approval Date: August 4, 2008 ASD/LRFD WIND & SEISMIC Special Design Provisions for Wind and Seismic WITH COMMENTARY American Forest & Paper Association Updates and Errata
More informationAttachment A. USG Minimum Design and Construction Requirements for Wood Framed Structures
Attachment A USG Minimum Design and Construction Requirements for Wood Framed Structures 1. General Design Criteria 1.1. Per Adopted Georgia State Minimum Standard Building Code 1.2. Minimum Live Loads
More informationEngineered Wood CONSTRUCTION GUIDE
Engineered Wood CONSTRUCTION GUIDE Engineered Wood Construction Guide 2 A few facts about wood. WOOD The Natural Choice Engineered wood products are a good choice for the environment. They are manufactured
More informationWIND & SEISMIC 2008 EDITION ASD/LRFD WITH COMMENTARY. American Forest & Paper Association. American Wood Council ANSI/AF&PA SDPWS-2008
2008 EDITION ANSI/AF&PA SDPWS-2008 Approval Date: August 4, 2008 ASD/LRFD WIND & SEISMIC Special Design Provisions for Wind and Seismic WITH COMMENTARY American Forest & Paper Association American Wood
More informationFundamentals of Building Construction: Materials and Methods
Fundamentals of Building Construction: Materials and Methods Allen, Edward ISBN-13: 9780470074688 Table of Contents Preface. Chapter 1: Making Buildings. Learning to Build. Sustainability. The Work of
More informationtwelve wood construction: materials & beams Wood Beam Design Wood Properties Timber National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2017 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood Beam
More informationtwelve wood construction: materials & beams Wood Beam Design Wood Properties Timber National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2016 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood Beam
More informationtwelve wood construction: materials & beams Wood Beam Design Timber Wood Properties National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 20178 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood National
More informationBuilding Division Informational Handout
CITY OF SAN JOSÉ, CALIFORNIA Building Division Informational Handout Conventional Light Frame Construction Design Provisions 2007 CBC Handout No. 2-21 Published: 1/1/08 Page 1 of 3 This document summarizes
More informationStructural Composite Lumber (SCL)
Prefabricated Wood I-Joists Structural Composite Lumber (SCL) Laminated Veneer Lumber (LVL) Parallel Strand Lumber (PSL) Laminated Strand Lumber (LSL) Oriented Strand Lumber (OSL) Other EWP Products Plywood
More informationTHE FLORIDA BUILDING CODE
THE FLORIDA BUILDING CODE 1. According to the Florida Building Code, spiral stairway treads must all be identical and rise must be sufficient enough to provide a headroom of minimum. A. 6'- 4" B. 6'- 6"
More informationBuild A Better Floor, Every Step Of The Way. LPCorp.com
Build A Better Floor, Every Step Of The Way LPCorp.com LP Engineered Wood Floor Components: The Systematic Way To Build Faster, Stronger, Better Floors All Together Now LP Engineered Wood Floor Components
More informationtwelve wood construction: materials & beams Wood Beam Design Wood Properties Timber National Design Specification
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture twelve wood construction: materials & beams Wood Beams 1 Lecture 12 Architectural Structures F2009abn Wood Beam
More informationTABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS
AIA General Conditions... GC-1 to GC-44 Amendments to General Conditions... AM-1 to AM-2 Supplements to General Conditions... SU-1 to SU-7 00200 Instructions To Bidders... 1 3 00201 Contractor s Bidding
More informationthirteen wood construction: materials & beams ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2016 lecture
ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2016 lecture thirteen wood construction: materials & beams Wood Beams 1 Wood Beam Design National Design Specification
More informationA Simple Solution for Meeting
A Simple Solution for Meeting Narrow Wall Bracing Requirements AND BUILDING A STRONGER, SAFER HOME. APA s Narrow Wall Bracing Method, combined with walls that are fully sheathed with plywood or OSB, helps
More informationCustom 22' x 40' - 16' Tall Garage Plan #g227 By SDS-CAD Specialized Design Systems
P O Box 34 Mendon, Utah Custom 22' x 40' - 16' Tall Garage Plan #g22 By Page 1 Title Page Page 2 Main Floor Plan Page 3 Foundation Plan Page 4 Elevation Views Page 5 Framing and Details Page 6 Typical
More informationMaterial Report - [Trade Contractors] for plan: [E:\SoftPlan14\Projects\Sample Drawings.spf\2-Storey sqft.spf] Page 1 of 5
Material Report - [Trade Contractors] for plan: [E:\SoftPlan14\Projects\Sample Drawings.spf\2-Storey 01-2320 sqft.spf] Page 1 of 5 PREPARATION PRELIM PERMITS & FEES Building Permit 1 each 2200.00 _ 2200.00
More information1. The subfloor must be structurally sound and able to withstand live and dead loads with a deflection limitation of L/360.
HARDWOOD FLOOR Read First These suggestions represent generally accepted procedures for successful installation of Maxxon Products. These instructions may be followed, modified or rejected by the owner,
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: LAMINATED VENEER LUMBER REPORT HOLDER: REDBUILT LLC EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ESR 299 Reissued 01/2019 This report is subject to renewal 01/2021. DIVISION: 06 00 00
More informationStructural Panels. Council Notes. Volume 8, Number 2. Building Research Council. College of Fine and Applied Arts-University of Illinois
Structural Panels Council Notes Building Research Council Volume 8, Number 2 College of Fine and Applied Arts-University of Illinois Introduction This publication deals with wood-based, composite structural
More informationSustainable Design and The Future with Wood Products
Sustainable Design and The Future with Wood Products Sustainable Design Philosophy Sustainable design implies responsibility and it implies far-reaching respect for natural systems and resources, respect
More informationthirteen wood construction: materials & beams Timber Wood Beam Design Wood Properties
ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2018 lecture thirteen wood construction: materials & beams Wood Beams 1 Wood National Design Specification f Wood
More informationCHAPTER 5 FLOORS SECTION R501
CHAPTER 5 FLOORS SECTION R501 GENERAL R501.1 Application. The provisions of this chapter shall control the design and construction of the floors for all buildings including the floors of attic spaces used
More informationGARAGE MAIN FLOOR PLAN
BUILDING CONTRACTOR/HOME OWNER TO REVIEW AND VERIFY ALL DIMENSIONS, SPECS, AND CONNECTIONS BEFORE CONSTRUCTION BEGINS. SHED TO BE BUILT AS PER IRC, UBC OR CURRENT LOCAL CODE To the best of my knowledge
More informationGARAGE MAIN FLOOR PLAN
12'-0" 4'-6" 3'-0" 4'-6" 3040 14'-0" LADDER LT LINE BUNK CABIN 11'-4" x 13'-4" 14'-0" BUILDING CONTRACTOR/HOME OWNER TO REVIEW AND VERIFY ALL DIMENSIONS, SPECS, AND CONNECTIONS BEFORE CONSTRUCTION BEGINS.
More informationJoint Evaluation Report
0 Joint Evaluation Report ICC ES (800) 423 6587 (562) 699 0543 www.icc es.org 000 ESR 1040 Reissued 09/2018 Revised 03/2019 This report is subject to renewal 09/2019. DIVISION: 06 00 00 WOOD, PLASTICS
More informationJoint Evaluation Report ICC-ES (800) (562)
0 Joint Evaluation Report ICC-ES (800) -658 (56) 699-05 www.icc-es.org 000 ESR-0 Reissued 0/0 This report is subject to renewal 0/08. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION: 06 6 00 SHEATHING
More informationGAF EnergyGuard Polyiso Wall Sheathing
From: Technical Services May 15, 2013 GAF EnergyGuard Polyiso Wall Sheathing GAF s EnergyGuard Polyiso Wall Sheathing is intended to be installed on residential construction only. Application types include:
More informationGold Bond BRAND Gypsum Sheathing
BRAND 09 06 29 16 00/NGC 43/NGC brand is a moisture-resistant sheathing installed on the outside of exterior framing as a substrate for exterior claddings. It is manufactured with a treated water-resistant
More informationSECTION GYPSUM BOARD ASSEMBLIES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 09260 - A. Metal stud wall framing. Denoted on drawings as "metal studs". B. Metal channel ceiling framing. C. Acoustic insulation and sealant. D. Cementitious
More informationJoint Evaluation Report
0 Joint Evaluation Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 ESR-1040 Reissued 09/2016 This report is subject to renewal 09/2018. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION:
More informationJoint Evaluation Report
0 Joint Evaluation Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 ESR-1040 Reissued 09/2018 This report is subject to renewal 09/2019. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION:
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD I-JOISTS REPORT HOLDER: PACIFIC WOODTECH CORPORATION
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1225 Reissued 10/2017 This report is subject to renewal 10/2019. DIVISION: 06 00
More informationSECTION RESIDENTIAL CASEWORK
PART1 GENERAL 1.01 SECTION INCLUDES A. Vanity cabinets. B. Toilet room casework. C. Casework hardware. 1.02 RELATED REQUIREMENTS A. Section 12 36 00 - Countertops. 1.03 REFERENCE STANDARDS SECTION 12 35
More informationWind-Rated Roofs D e s i g n i n g C o m m e r c i a l R o o f s t o W i t h s t a n d W i n d U p l i f t F o r c e s
D e s i g n i n g C o m m e r c i a l R o o f s t o W i t h s t a n d W i n d U p l i f t F o r c e s 2 A few facts about wood. WOOD The Natural Choice Engineered wood products are a good choice for the
More informationassembly an open space between the roof and ceiling of a building attic balloon frame a joist constructed of steel with bars in the verticle web space
assembly two or more interconnected structural components combined to meet a specific function or design requirement attic an open space between the roof and ceiling of a building balloon frame a type
More informationTABLE OF CONTENTS Updated 1/2014 SECTION TITLE DATE
TABLE OF CONTENTS SECTION TITLE DATE Division 00 Procurement and Contracting Requirements 000101... Project Title Page 000116... CAD Standards 001116... Invitation to Bid 002113... Instructions to Bidders
More informationA. Product Data: For each type of process and factory-fabricated product.
SECTION 061000 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Framing with dimension lumber. 2. Framing with engineered wood products. 3. Shear wall panels. 4. Rooftop equipment bases and support
More informationSCREEN PORCHES 101 DEVELOPMENT RESOURCES, INC Permit Requirements
SCREEN PORCHES 101 DEVELOPMENT RESOURCES, INC. 320-226.5189 www.101developmentresources.com While every attempt has been made to insure the correctness of this handout, no guarantees are made to its accuracy
More informationCustom 30 x 48-14' Tall Garage Plan #g226 By SDS-CAD Specialized Design Systems
P O Box 34 Mendon, Utah Custom 30 x 48-14' Tall Garage Plan #g226 By Page 1 Title Page Page 2 Main Floor Plan Page 3 Foundation Plan Page 4 Elevation Views Page 5 Framing and Details Page 6 Typical Section
More informationBROCHURE # 108 CONSTRUCTION PLAN COMPONENTS
BROCHURE # 108 CONSTRUCTION PLAN COMPONENTS Please note: This construction plan component list is to be used as a guide to assist you with your project. There may be elements unique to your project not
More informationGARAGE MAIN FLOOR PLAN
BUILDING CONTRACTOR/HOME OWNER TO REVIEW AND VERIFY ALL DIMENSIONS, SPECS, AND CONNECTIONS BEFORE CONSTRUCTION BEGINS. SHED TO BE BUILT AS PER IRC, UBC OR CURRENT LOCAL CODE To the best of my knowledge
More informationTrusted ICC ES APA TH STREET. Conformity! subject of the
0 Most Widely Accepted and Trusted ICC ES Report ICC ES 000 (800) 42 687 (62) 699 04 www.icc es.orgg ESR 286 Reissued 07/207 This report is subject to renewal 07/209. DIVISION: 06 00 00 WOOD, PLASTICS
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ITEM 03100 CONCRETE FORMWORK 1.0 GENERAL 1.1 DESCRIPTION This section defines requirements and limitations for design, construction, erection, and removal of concrete formwork for
More informationFeaturing Selection and Installation Information for Lateral Wind Loads
#TJ-8000 SPECIFIER S GUIDE 1¼" TIMBERSTRAND LSL RIM BOARD AND 1 1 8" TJ RIM BOARD Featuring Selection and Installation Information for Lateral Wind Loads For Use in ASCE/SEI 7-05 Basic Wind Speed Regions
More informationPRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels ( )
PRODUCT: Structural Insulated Panels (SIP) DIVISION: Wood and Plastics (06) SECTION: Structural Panels (06 12 16) Report Holder General Panel Corporation PO Box 279 2604 Sunset Drive Grenada, Mississippi
More informationMAIN FLOOR PLAN. #G x 14 x 8 Shed - Chicken Coop By SDS-CAD Specialized Design Systems 10'-0" 3'-0" 1'-0" 14'-0" 14'-0" 1'-0" 6'-0" 3'-0"
10'-0" BUILDING CONTRACTOR/HOME OWNER TO REVIEW AND VERIFY ALL DIMENSIONS, SPECS, AND CONNECTIONS BEFORE CONSTRUCTION BEGINS. BARN TO BE BUILT AS PER LOCAL CODE REQUIREMENTS 14'-0" BWP BWP BWP ABWP 101
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS REPORT HOLDER: PASLODE, AN ILLINOIS TOOL WORKS COMPANY
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3071 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 06 00
More informationU.S. EDITION RESIDENTIAL CONSTRUCTION DETAILS SAMPLE. A visual guide to construction detailing. Emma Walshaw
RESIDENTIAL CONSTRUCTION DETAILS U.S. EDITION A visual guide to construction detailing Emma Walshaw Contents INTRODUCTION 4 PRINCIPLES OF CONSTRUCTION DETAILING 6 FOUNDATIONS 9 PRINCIPLES OF FOUNDATION
More informationThe better way to build TM. Installation Manual NAILBASE PANELS
The better way to build TM Installation Manual PANELS November 2018 SIPs Installation Manual Table of Contents Topics General Requirements................................... 3 Materials..............................................
More informationInstallation of Stucco Exterior Finish Over Wood Structural Panel Wall Sheathing
D A T A F I L E Installation of Stucco Exterior Finish Over Wood Structural Panel Wall Sheathing Stucco exterior wall finish is popular as a low-maintenance, fire-resistive finish for exterior walls of
More informationGarage/Accessory Structures
Garage/Accessory Structures City of New Prague Building Inspections Department 118 Central Ave N New Prague, MN 56071 (952) 758-4401 Fax (952) 758-1149 Requirements for submitted Building Plans Signed
More information#G445 Plans, 48'x28' x 10' detached garage with bonus room By SDS-CAD Specialized Design Systems
Architectural asphalt shingles and horizontal True Wood 7" Reveal siding over structural panel. Nailing schedule is 6" on ends 12" on centers 6d nails. Trusses are engineered on Bonus attic trusses 24"
More informationHIGH PERFORMANCE FIRE RETARDANT TREATED WOOD PRODUCTS
TM HIGH PERFORMANCE FIRE RETARDANT TREATED WOOD PRODUCTS Innovators of high performance fire retardant products Class A Rated Fire Retardant Treated Wood Products TM Certified and Listed with Accredited
More informationJoint Evaluation Report ICC-ES (800) (562)
0 Joint Evaluation Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 ESR-1336 Reissued 09/2016 This report is subject to renewal 09/2018. DIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION:
More informationCHAPTER 5 FLOORS SECTION R501
CHAPTER 5 FLOORS SECTION R501 GENERAL R501.1 Application. The provisions of this chapter shall control the design and construction of the floors for all buildings including the floors of attic spaces used
More informationSECTION GYPSUM BOARD & SHEATHING SYSTEMS
PART 1!GENERAL! 1.01! SECTION INCLUDES SECTION 09260 GYPSUM BOARD & SHEATHING SYSTEMS! Metal stud wall framing. Metal channel ceiling framing.! Gypsum board.! Sheathing.! Taped and sanded joint treatment.!
More informationLPI 56 Technical Guide
LPI 56 Technical Guide Floor & Roof Applications Product Specifications & Design Values 2 Floor Tables 3 Uniform Floor Load (PLF) Tables: Simple s 4 Uniform Floor Load (PLF) Tables: Continuous s 5 Uniform
More informationvs. Competition o Wood LVL s are more cost effective but require a higher frequency of stanchion posts making basement finishing more difficult
vs. Competition We want to build you the best home on the market and we want you to know that you re getting a high-quality home built with experienced contractors and with reliable products. Below are
More informationDECK PERMIT APPLICATION
DECK PERMIT APPLICATION APPLICANT S INFORMATION Name: Company Name: Current address: City: State: ZIP Code: Phone: Email: PROPERTY OWNER S INFORMATION Name: Property Address: Phone: E-mail: City: State:
More informationINDUSTRIAL FLOORING. AraucoPly is manufactured with limited to zero core. gaps and overlaps, making
ARAUCO PLY THE SUPERIOR INDUSTRIAL AraucoPly is manufactured with limited to zero core gaps and overlaps, making it efficient in the toughest of industrial situations. It is ideal for truck beds, trailers,
More informationWALL CONSTRUCTION CHAPTER 6
CHAPTER 6 WALL CONSTRUCTION SECTION R601 GENERAL R601.1 Application. The provisions of this chapter shall control the design and construction of all walls and partitions for all buildings. R601.2 Requirements.
More informationNAAHB Workgroup Index General Ledger Account
NAAHB Workgroup Index General Ledger Account 1000 Series Preparation/Preliminaries 1000 Permits/Fees 1010 Building Permits 1020 HBA Assessments 1030 Warranty Fees 1100 Architectural/Engineering 1110 Blue
More informationWind-Rated Roofs DESIGNING COMMERCIAL ROOFS TO WITHSTAND WIND UPLIFT FORCES
DESIGNING COMMERCIAL ROOFS TO WITHSTAND WIND UPLIFT FORCES A few facts about wood. WOOD The Natural Choice Engineered wood products are a good choice for the environment. They are manufactured for years
More informationLISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316
LISTING INFORMATION OF International Beams - IB Series Joists SPEC ID: 27316 International Beams Inc. 2010 Boul. St-Elzear Quest Laval, QC H7L 3N4 CANADA This report is for the exclusive use of Intertek
More information