SAFETY DATA SHEET. 1/9 Revision Date: Product No.: SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

Transcription

1 1/9 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Container size: 1 lb (0,45 kg) & 5 kg 1.2. Relevant identified uses of the substance or mixture and uses advised against Application: Lubricating grease Details of the supplier of the safety data sheet Supplier: Manufacturer Responsible for safety data sheet authoring: 1.4. Emergency telephone number EU importer:.. Ωmega Manufacturing Division 1801, Guardian House 32 Oi Kwan Road Wanchai, Hong Kong Tel:(852) Fax:(852) magna@magnagroup.com SDS_info@dhigroup.com Sovereign Lubricants (UK) Ltd, Crowtrees Lane, Rastrick, West Yorkshire, HD6 3LZ T: F: enquiries@sovereign-omega.co.uk **Manufactured in Canada**

2 2/9 SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the substance or mixture The product is classified: 67/548/EEC: Human health: Environment: 2.2. Label elements N;R50/53 Prolonged or repeated contact with skin may cause redness, itching, irritation and eczema/chapping. The harmful effects may increase in used grease. The product is very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Dangerous for the environment R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. S57 S60 S Other hazards PBT/vPvB: Use appropriate containment to avoid environmental contamination. This material and its container must be disposed of as hazardous waste. Avoid release to the environment. Refer to special instructions/safety data sheets.

3 3/9 SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS The product contains: mineral oil, thickener, fillers and additives. 67/548/EEC: %: CAS-No.: EC No.: REACH Reg. No: Chemical name: Hazard classification: Notes: 2, Zinc oxide N;R Aluminium powder (stabilised) F;R11-15 T Copper Graphite - GHS/CLP: %: CAS-No.: EC No.: REACH Reg. No: Chemical name: Hazard classification: Notes: 2, Zinc oxide Aquatic Acute 1;H400 Aquatic Chronic 1;H Aluminium powder (stabilised) Water-react. 2;H261 Flam. Sol. 1;H Copper - T Graphite - References: The full text for all R-phrases and hazard statements are displayed in section 16. SECTION 4: FIRST AID MEASURES 4.1. Description of first aid measures Inhalation: Skin contact: Eye contact: Ingestion: Move into fresh air and keep at rest. In case of persistent throat irritation or coughing: Seek medical attention and bring these instructions. Remove contaminated clothing immediately and wash skin with soap and water. In case of rashes, wounds or other skin disorders: Seek medical attention and bring along these instructions. Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Seek medical attention and bring along these instructions. Immediately rinse mouth and drink plenty of water. Keep person under observation. If person becomes uncomfortable seek hospital and bring these instructions Most important symptoms and effects, both acute and delayed Symptoms/effects: See section 11 for more detailed information on health effects and symptoms Indication of any immediate medical attention and special treatment needed Medical attention/treatments: Not known.

4 4/9 SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing media Extinguishing media: 5.2. Special hazards arising from the substance or mixture Specific hazards: 5.3. Advice for firefighters Protective equipment for fire-fighters: Small fires: Extinguish with carbon dioxide or dry powder. Larger fires: Extinguish with foam, carbon dioxide or dry powder. During fire, gases hazardous to health may be formed. Selection of respiratory protection for fire fighting: follow the general fire precautions indicated in the workplace. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: 6.2. Environmental precautions Environmental precautions: 6.3. Methods and material for containment and cleaning up Methods for cleaning up: 6.4. Reference to other sections Avoid contact with skin and eyes. Follow precautions for safe handling described in this safety data sheet. Do not discharge into drains, water courses or onto the ground. Absorb spillage with oil-absorbing material. Clean contaminated area with oil-removing material. References: For personal protection, see section 8. For waste disposal, see section 13. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for safe handling Safe handling advice: Technical measures: Technical precautions: Observe good chemical hygiene practices. Avoid prolonged and repeated contact with grease, particularly used grease. Always remove grease with soap and water or skin cleaning agent, never use organic solvents. Work practice should minimise contact. When working with heated grease, mechanical ventilation may be required Conditions for safe storage, including any incompatibilities Technical measures for safe storage: Storage conditions: 7.3. Specific end use(s) Specific use(s): No special precautions. Store in tightly closed original container.

5 5/9 SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1. Control parameters This product contains: Copper, Graphite, Aluminium powder (stabilised) and Zinc oxide. This/these substance(s) is/are subject to an Occupational Exposure Limit and may present an inhalation risk if present as dust or fume. This is not relevant to the current physical state of the product, which is not in a respirable form. Occupational exposure limits: CAS-No.: Chemical name: As: Exposure limits: Type: Notes: References: Copper, dusts and mists Cu 1 mg/m3 TWA - EH40-2 mg/m3 STEL 15min Copper, fume mg/m3 TWA - EH Graphite, inhalable dust Graphite, respirable dust - Aluminium metal, total inhalable dust - Aluminium metal, respirable dust - 10 mg/m3 TWA - EH40-4 mg/m3 TWA - EH40-10 mg/m3 TWA - EH40-4 mg/m3 TWA - EH40 - Zinc oxide, fume - 5 mg/m3 TWA - EH Exposure controls - 10 mg/m3 STEL 15min Engineering measures: Personal protection: Respiratory equipment: Hand protection: Eye protection: Skin protection: Hygiene measures: Environmental Exposure Controls: Provide adequate ventilation. When working with heated grease, mechanical ventilation may be required. Provide access to washing facilities incl. soap, skin cleanser and fatty cream. Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment. In case of inadequate ventilation use suitable respirator. Use respiratory equipment with particle filter, type P2. Risk of contact: Wear protective gloves. Nitrile gloves are recommended. Other types of gloves can be recommended by the glove supplier. Risk of contact: Wear goggles/face shield. No special precautions. Wash hands after handling. Not available.

6 6/9 SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on basic physical and chemical properties Appearance: Odour: ph: Boiling point: grease / copper-coloured paste slight odour (sweetish) not relevant not available Flash point: 213 C Explosion limits: Vapour pressure: Relative density: 1,31 Solubility: Decomposition temperature ( C): 9.2. Other information Other data: not available not available insoluble in water not available SECTION 10: STABILITY AND REACTIVITY Reactivity Reactivity: Chemical stability Stability: None known Possibility of hazardous reactions Hazardous Reactions: Conditions to avoid Stable under normal temperature conditions. None known. Conditions/materials to avoid: None specific Incompatible materials Incompatible materials: Hazardous decomposition products Hazardous decomposition products: Strong oxidising substances, strong acids and strong bases. None in particular.

7 7/9 SECTION 11: TOXICOLOGICAL INFORMATION Information on toxicological effects The harmful effects may increase in used grease. Inhalation: Skin contact: Eye contact: Ingestion: Specific effects: Inhalation of oil mist or vapours formed during heating of the product will irritate the respiratory system and provoke coughing. Degreasing. Prolonged or repeated contact with skin may cause redness, itching, irritation and eczema/chapping. Direct contact may irritate. May irritate and cause malaise. Prolonged or repeated contact with used grease may cause serious skin diseases, such as dermatitis. SECTION 12: ECOLOGICAL INFORMATION Toxicity Ecotoxicity: Persistence and degradability Degradability: Bioaccumulative potential Bioaccumulative potential: Mobility in soil Mobility: The product is very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Zinc oxide: EC50 (Daphnia: Daphnia magna)/48 hours: 0.01 < EC mg/l The product contains inorganic compounds which are not biodegradable. The other substances of the product are slowly biodegradable. No data available on bioaccumulation. No data available Results of PBT and vpvb assessment PBT/vPvB: Other adverse effects Other adverse effects: None known. SECTION 13: DISPOSAL CONSIDERATIONS Waste treatment methods Dispose of waste and residues in accordance with local authority requirements. Waste is classified as hazardous waste. Waste from residues: EWC-code:

8 8/9 SECTION 14: TRANSPORT INFORMATION UN number UN-No: UN proper shipping name Proper Shipping Name: Transport hazard class(es) Class: Packing group PG: Environmental hazards Marine pollutant: Environmentally Hazardous substance: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Zinc oxide) III Yes. Yes Special precautions for user Special precautions: None known Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Transport in bulk: SECTION 15: REGULATORY INFORMATION Safety, health and environmental regulations/legislation specific for the substance or mixture National regulation: Chemical Safety Assessment CSA status: Statutory Instruments 2008 No The REACH Enforcement Regulations The Control of Substances Hazardous to Health Regulations 2002 (S.I 2002 No. 2677) with amendments. The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (S.I 2009 No. 716). EH40/2005, Workplace exposure limits 2005, with amendments. The Control of Substances Hazardous to Health Regulations 2002 (S.I 2002 No. 2677) with amendments. EH40/2005, Workplace exposure limits 2005, with amendments. The List of Wastes (England) (Amendment) Regulations (SI 2005 No. 895).

9 9/9 SECTION 16: OTHER INFORMATION The user must be instructed in the proper work procedure and be familiar with the contents of these instructions. Omega Manufacturing Division 1801, Guardian House, 32 Oi Kwan Road Wanchai, Hong Kong Tel : (852) Fax : (852) Web site : The Omega Trade Mark is the property of ITW, Inc., and is used under licence by Magna Industrial Co. Limited. Wording of R-phrases/H-statements: R11 R15 Highly flammable. Contact with water liberates extremely flammable gases. R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. H228 H261 H400 H410 Flammable solid. In contact with water releases flammable gases. Very toxic to aquatic life. Very toxic to aquatic life with long lasting effects. The information on this data sheet represents our current data and is reliable provided that the product is used under the prescribed conditions and in accordance with the application specified on the packaging and/or in the technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. Made by DHI - Environment and Toxicology, Agern Allé 5, DK-2970 Hørsholm, Denmark.