Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Size: px
Start display at page:

Download "Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005"

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Date of issue: Holder of certificate: GL Garrad Hassan Deutschland GmbH with its locations: Sommerdeich 14 b, Kaiser-Wilhelm-Koog Brooktorkai 18, Hamburg Tests in the fields: Wind measurements with meteorological masts and remote sensing devices (LiDAR); Determination and evaluation of site-specific wind conditions and energy production; Load Measurements on wind turbines; Safety, function and behaviour tests on wind turbines; Power Performance Measurements; Measurement of electrical characteristics of power generating systems; Shadow impact assessments; Acoustic emission and immission measurements; Acoustic impact assessments; Module Immission Control Acoustic Noise - Group V: Determination of Noise Abbreviations used: see last page Within the scope of accreditation marked with *, the testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing standards within the flexible scope of accreditation. The test methods are identified by the following symbols of the sites where they are carried out: KWK = Kaiser-Wilhelm-Koog HAM = Hamburg 1/7

2 1 Wind measurements with meteorological masts and remote sensing devices (LiDAR) (KWK) IEC , Ed. 2 * FGW TR6, Rev. 9 * ISI-RA-MEA-4200-A Ed. 2 Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines, Annex L Determination of wind potential and energy yields Wind resource measurement 2 Determination and evaluation of site-specific wind conditions and energy production (HAM) FGW TR5, Rev. 7* FGW TR6, Rev. 9 * , incl. Annex C IEC , Ed. 2 * MEASNET Site-Specific Wind Conditions, Version ISI-RA-MEA-4900-A ISI-RA-MEA-4900-A550 ISI-RA-MEA-4900-A551 ISI-RA-MEA-4900-A552 Bestimmung und Anwendung des Referenzertrages Determination of wind potential and energy yields Ed. 2 Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines, Annex L MEASNET Evaluation of Site-Specific Wind Conditions Determination and evaluation of site-specific wind conditions and energy production Wind Resource and Energy Yield Modelling - Without On Site Measurement Turbulence Intensity Assessment -Without On Site Measurement EEG Relating Service with reference to: EEG Gesetz für den Ausbau erneuerbarer Energien (Erneuerbare-Energien-Gesetz EEG) Period of validity: to Date of issue: /7

3 3 Load Measurements on wind turbines, Safety, function and behaviour tests on wind turbines (KWK) IEC Ed.1 * IEC Ed IEC Ed DNVGL-ST DNVGL-ST Wind turbines - Part 13: Measurement of mechanical loads Wind turbines - Part 2: Design requirements for small wind turbines Chapters: 7.6 Load Measurements 13. Testing Annex I Natural frequency analysis Wind turbines - Part 22: conformity testing and verification Chapters: 8.4 Type testing 8.8 Type characteristics measurements 9.11 Project characteristics measurements Annex C Minimum requirements for load measurements Annex D Requirements for safety and function tests Loads and site conditions for wind turbines Section 5. Measurements Control and protection systems for wind turbines Section 6. Test of the wind turbine behaviour Appendix C Test of turbine behaviour, specification 4 Power Performance Measurements (KWK) FGW TR 2 Rev. 16 * IEC , Ed. 2 * IEC * IEC Ed Bestimmung von Leistungskurve und standardisierten Energieerträgen Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines Ed.1 Wind turbines - Part 12-2: Power performance of electricity Producing wind turbines based on nacelle anemometry Wind turbines - Part 22: conformity testing and verification Chapters 8.4 Type testing 9.11 Project characteristics measurements Period of validity: to Date of issue: /7

4 MEASNET Power Performance, Version MEASNET Power Performance Measurement Procedure 5 Measurement of electrical characteristics of power generating systems (Power Quality) (KWK) DIN VDE V * FGW TR 3, Rev. 24 * FGW TR8, Rev. 6 Anhang F, Abschnitt IEC , Ed 2 * IEEE IEEE MEASNET Power Quality Measurement, V PVVC, Ver Grid integration of generator plants - Low-voltage - Test requirements for generator units to be connected to and operated in parallel with low-voltage distribution networks Bestimmung der elektrischen Eigenschaften von Erzeugungseinheiten am Mittel-, Hoch- und Höchstspannungsnetz Zertifizierung der elektrischen Eigenschaften von Erzeugungseinheiten und -anlagen am Mittel-, Hoch- und Höchstspannungsnetz Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines IEEE Recommended Practice-Adoption of IEC :2010, Electromagnetic compatibility (EMC)-Testing and measurement techniques-flickermeter-functional and design specifications Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems MEASNET Power Quality Measurement Procedure, Version 4; Procedimiento de verificacion, validacion y certificacion de los requisitos del P.O sobre la respuesta de las instalaciones eolicas y fotovoltaicas ante huecos de tension 6 Shadow impact assessment (KWK) ISI-RA-MEA-4620 Shadow Flicker Impact Assessment Period of validity: to Date of issue: /7

5 7 Acoustic emission and immission measurements and acoustic impact assessments (KWK) DIN EN ISO 3741* DIN EN ISO 3744* DIN EN ISO 3746* DIN * DIN * DIN Beiblatt 1* DIN * ; + Berichtigung 2, DIN ISO * FGW TR 1 Rev. 18 * IEC , Ed IEC , Ed. 3.0 * Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering method in an essentially free field over a reflection plane. Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; basic method, divided into 3 grades of accuracy Determination of rating levels from measurement data - Part 1: Noise immission in the neighbourhood Measurement and assessment of low-frequency noise immissions in the neighbourhood; Measurement and assessment of low-frequency noise immissions in the neighbourhood - Guidelines for the assessment for industrial plants Acoustics - Determination of tonal components of noise and determination of a tone adjustment for the assessment of noise immissions Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation Bestimmung der Schallemissionswerte Wind turbine generator systems -Part 11: Acoustic noise measurement techniques (withdrawn standard) Wind turbine generator systems - Part 11: Acoustic noise measurement techniques Period of validity: to Date of issue: /7

6 ISO * BWEA TA Lärm Acoustics - description, measurement and assessment of environmental noise - Part 2 Determination of environmental noise levels British wind energy association "Small wind turbine performance and safety standard"; Sechste allgemeine Verwaltungsvorschrift zum Bundes- Immissionsschutzgesetz (Technische Anleitung zum Schutz gegen Lärm TA-Lärm), (GMBl Nr. 26, vom , S 503) 8 Procedures Module Immission Control Gruppe V: Ermittlung von Geräuschen TA Lärm Titel FGW TR1 Rev. 18, IEC Ed. 3.0: Norm / Richtlinie / Technische Regel QM-Dokument Bemerkung Bezeichnung Standort Sechste Allgemeine Verwaltungsvorschrift zum Bundes-Immissionsschutzgesetz; Technische Anleitung zum Schutz gegen Lärm - TA Lärm einschließlich der darin benannten Normen und Richtlinien. Bestimmung der Schallemissionswerte Wind turbine generator systems - Part 11: Acoustic noise measurement technique. including amendments ISI-RA-MEA-4600 ISI-RA-MEA-4601 ISI-RA-MEA-4602 ISI-RA-MEA-4603 ISI-RA-MEA-4604 ISI-RA-MEA-4605 ISI-RA-MEA-4606 ISI-RA-MEA-4610 ISI-RA-MEA-4600 ISI-RA-MEA-4606 ISI-RA-MEA-4601 ISI-RA-MEA-4606 KWK KWK KWK Die aufgeführten Verfahren entsprechen den Anforderungen zum Fachkundenachweis für Ermittlungen im Bereich des Immissionsschutzes ( Modul Immissionsschutz ) in der Fassung vom Für die immissionsschutzrechtlich geregelten fachlichen Aufgabenbereiche Gruppe V wird die Kompetenz bestätigt. Period of validity: to Date of issue: /7

7 Responsible person: Dipl.-Ing. (FH) Ulf Kock Deputy responsible person: Dipl.-Ing. (FH) Jörg Dedert Abbreviations used: BWEA DIN DNV GL FGW TR IEC IEEE ISI-RA-MEAxxx MEASNET PVVC TA-Lärm VDE British Wind Energy Association German Institute for Standardization Det Norske Veritas Germanischer LLoyd Federation of German Windpower and other Renewable Energies International Electrotechnical Commission Institute of Electrical and Electronics Engineers In house method of the GL Garrad Hassan Deutschland GmbH Measuring Network of Wind Energy Institutes Procedure for Verfication, Validation and Certification Technical Guidelines for noise reduction Association for Electrical, Electronic and Information Technologies Period of validity: to Date of issue: /7

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-11095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 21.08.2017 to 15.12.2020

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18020-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 19.12.2017 to 18.12.2022 Holder of certificate: Deutsche

More information

Onshore Services for. Manufacturers. of Wind Turbines & Components

Onshore Services for. Manufacturers. of Wind Turbines & Components Onshore Services for Manufacturers of Wind Turbines & Components Global Wind Energy Measurement Services All-in-One Service Provider Combining technical expertise with many years of in-depth industry experience,

More information

Noise impact assessment for the area of the projected wind farm Süderlügum

Noise impact assessment for the area of the projected wind farm Süderlügum Noise impact assessment for the area of the projected wind farm Süderlügum Client: Clients address: Report no.: Location: Bürgerwindpark Süderlügum GmbH & Co. KG Dorfstraße 11 25923 Ellhöft GLGH-4275 12

More information

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-17195-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 20.07.2016 to 19.07.2021 Holder of certificate: WindGuard

More information

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-11326-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 11.12.2017 to 16.11.2019 Date of issue: 11.12.2017

More information

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate D-ZE-11053-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 21.12.2017 to 20.06.2018 Date of issue: 28.12.2017

More information

Annex to the Accreditation Certificate D ZE according to DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D ZE according to DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D ZE 11326 01 00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 07.11.2016 to 16.11.2019 Date of issue: 07.11.2016

More information

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-02 according to DIN EN ISO/IEC 17065:2013 Date of issue: 31.01.2017 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße

More information

Onshore Services for. Manufacturers. of Wind Turbines & Components

Onshore Services for. Manufacturers. of Wind Turbines & Components Onshore Services for Manufacturers of Wind Turbines & Components Research & Studies Customers benefit from our in-depth knowledge based on UL s participation in a number of stateof-the-art research projects,

More information

Onshore Services for. Wind Farms. Developers, Operators, Owners, Lenders & Investors

Onshore Services for. Wind Farms. Developers, Operators, Owners, Lenders & Investors Onshore Services for Wind Farms Developers, Operators, Owners, Lenders & Investors Global Wind Energy Measurement Services All-in-One Service Provider Combining technical expertise with many years of in-depth

More information

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-11 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen

More information

The TC WP votes for the following supplement to revision 9 of the technical guideline part 6 (TG 6).

The TC WP votes for the following supplement to revision 9 of the technical guideline part 6 (TG 6). FGW e. V. Oranienburger Straße 45 10117 Berlin Deutschland FGW TC WP- resolution for technical guideline TG 6 Rev. 9 FGW e.v. Fördergesellschaft Windenergie und andere Erneuerbare Energien Oranienburger

More information

Certification of advanced Electrical Characteristics based on Validation of WEC Models and Simulation of Wind Farms

Certification of advanced Electrical Characteristics based on Validation of WEC Models and Simulation of Wind Farms Certification of advanced Electrical Characteristics based on Validation of WEC Models and Simulation of Wind Farms Bernhard Schowe-von der Brelie, Dr. Hendrik Vennegeerts, FGH e.v., Martin Schellschmidt,

More information

RenewableUK Small Wind Turbine Standard

RenewableUK Small Wind Turbine Standard RenewableUK Small Wind Turbine Standard 01 October 2013 Formerly known as: British Wind Energy Association Small Wind Turbine Performance and Safety Standard Foreword This edition cancels and replaces

More information

Type and component certification of wind turbines

Type and component certification of wind turbines SERVICE SPECIFICATION DNVGL-SE-0441 Edition June 2016 Type and component certification of wind turbines The electronic pdf version of this document found through http://www.dnvgl.com is the officially

More information

Type and component certification of wind turbines according to IEC

Type and component certification of wind turbines according to IEC SERVICE SPECIFICATION DNVGL-SE-0074 Edition January 2018 Type and component certification of wind turbines according to IEC 61400-22 The electronic pdf version of this document, available free of charge

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18053-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 02.08.2018 to 26.07.2022 Holder of certificate: F

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61400-11 Edition 3.0 2012-11 colour inside Wind turbines Part 11: Acoustic noise measurement techniques INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 27.180 ISBN

More information

TFI Report acoustics

TFI Report acoustics TFI Report 441076-02 acoustics Customer Tapibel NV Industrielaan 4 B-3900 Overpelt BELGIUM Product textile floor covering Responsible at TFI Dr.-Ing. Alexander Siebel Tel: +49 241 9679 170 a.siebel@tfi-online.de

More information

General Building Regulation Test Certificate

General Building Regulation Test Certificate Materials Testing Institute University of Stuttgart Department of Fire Safety Unit 131 Reaction to Fire of Building Materials Note: This is a translation from the German original version not certified

More information

Annex to the Accreditation Certificate D-ZE

Annex to the Accreditation Certificate D-ZE «DAkkS Akkreditierungsstell GmbH Annex to the Accreditation Certificate D-ZE-054-0-00 according to DIN EN ISO/IEC 7065:203 Period of validity: 26.04.208 to 25.04.2023 Date of issue: 04.05.208 Holder of

More information

Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex the Accreditation Certificate D-K-18351-01-00 according DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-24 2018-10-27 Date of issue:

More information

ESTIMATION OF ODOUR EMISSIONS FROM FIELD INSPECTIONS (ESOFIN) AND A SCREENING MODEL FOR ODOUR DISPERSION (SMOD)

ESTIMATION OF ODOUR EMISSIONS FROM FIELD INSPECTIONS (ESOFIN) AND A SCREENING MODEL FOR ODOUR DISPERSION (SMOD) ESTIMATION OF ODOUR EMISSIONS FROM FIELD INSPECTIONS (ESOFIN) AND A SCREENING MODEL FOR ODOUR DISPERSION (SMOD) U. Janicke 1, L. Janicke 1, U. Hartmann 2 1 Janicke Consulting, Dunum, Germany 2 Landesamt

More information

THRUST COEFFICIENTS USED FOR ESTIMATION OF WAKE EFFECTS FOR FATIGUE LOAD CALCULATION

THRUST COEFFICIENTS USED FOR ESTIMATION OF WAKE EFFECTS FOR FATIGUE LOAD CALCULATION European Wind Energy Conference 1, Warsaw, Poland THRUST COEFFICIENTS USED FOR ESTIMATION OF WAKE EFFECTS FOR FATIGUE LOAD CALCULATION Peter Frohboese, Christian Schmuck GL Garrad Hassan WINDTEST Kaiser-Wilhelm-Koog

More information

Wind Turbine Certification

Wind Turbine Certification ENERGY Wind Turbine Certification Benefits and value added Tomasz Sieradzan 1 SAFER, SMARTER, GREENER Agenda Type Certification- Introduction Purpose of Type Certification Governing and technical standards,

More information

Ensuring sound insulation appropriate for the use of the rooms that prevents unreasonable disturbances.

Ensuring sound insulation appropriate for the use of the rooms that prevents unreasonable disturbances. TEC1.2 Sound insulation Objective Ensuring sound insulation appropriate for the use of the rooms that prevents unreasonable disturbances. Benefits Protection against disruptive noises has a significant

More information

Quality Management of Software and Systems

Quality Management of Software and Systems Quality Management of Software and Systems Organization of Tests Prof. Dr. Liggesmeyer, 1 Contents Organization of Quality Assurance and Quality Management Separation of Development and QS Test Documentation

More information

Prof. Dr. Liggesmeyer, 1. Quality Management of Software and. Organization of Tests. Systems. QMSS - Organization of Tests

Prof. Dr. Liggesmeyer, 1. Quality Management of Software and. Organization of Tests. Systems. QMSS - Organization of Tests Quality Management of Software and Systems Organization of Tests Prof. Dr. Liggesmeyer, 1 Contents Organization of Quality Assurance and Quality Management Separation of Development and QS Test Documentation

More information

Deliverable Number 8

Deliverable Number 8 Deliverable Number 8 LEGAL AND REGULATORY FRAMEWORK FOR WIND POWER IN RUSSIA Global Environment Facility and International Finance Corporation (GEF/IFC) Activities 5 and 6 MODEL FOR OBTAINING APPROVALS

More information

Introduction of UL/DEWI. A Global Service Provider serving the Wind Energy Industry

Introduction of UL/DEWI. A Global Service Provider serving the Wind Energy Industry Introduction of UL/DEWI A Global Service Provider serving the Wind Energy Industry Our mission drives everything we do Working for a safer world Since 1894 2 Innovation inherently Creates Risk 3 Rely on

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61400-11 Second edition 2002-12 Wind turbine generator systems Part 11: Acoustic noise measurement techniques Aérogénérateurs Partie 11: Techniques de mesure du bruit acoustique

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61400-1 Third edition 2005-08 Wind turbines Part 1: Design requirements IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in

More information

Practise-oriented consideration of the dynamic fast fault current of power park modules in grid protection analysis

Practise-oriented consideration of the dynamic fast fault current of power park modules in grid protection analysis 24th International Conference & Exhibition on Electricity Distribution (CIRED) 12-15 June 2017 Session 3: Operation, control and protection Practise-oriented consideration of the dynamic fast fault current

More information

LAGRANGIAN PARTICLE MODELLING FOR REGULATORY PURPOSES A SURVEY OF RECENT DEVELOPMENTS IN GERMANY

LAGRANGIAN PARTICLE MODELLING FOR REGULATORY PURPOSES A SURVEY OF RECENT DEVELOPMENTS IN GERMANY LAGRANGIAN PARTICLE MODELLING FOR REGULATORY PURPOSES A SURVEY OF RECENT DEVELOPMENTS IN GERMANY U. Janicke, L. Janicke Janicke Consulting, Dunum, Germany INTRODUCTION Dispersion modelling using a Lagrangian

More information

The Odyssey of Ulysses: Mobile Laboratory For Testing Wind Turbines

The Odyssey of Ulysses: Mobile Laboratory For Testing Wind Turbines The Odyssey of Ulysses: Mobile Laboratory For Testing Wind Turbines Madrid, 24-25 Enero 2006 2 Plan -Introduction to E2Q -The challenge of E2Q: ULYSSES -The real-life tests on Wind Turbines -Conclusions

More information

Appendix 3. Equipment standards

Appendix 3. Equipment standards EcoShopping - Energy efficient & Cost competitive retrofitting solutions for Shopping buildings Co-funded by the European Commission within the 7 th Framework Programme. Grant Agreement no: 609180. 2013-09-01

More information

Annex to the Accreditation Certificate D-ZM according to DIN EN ISO/IEC :2015

Annex to the Accreditation Certificate D-ZM according to DIN EN ISO/IEC :2015 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZM-14143-01-00 according to DIN EN ISO/IEC 17021-1:2015 Period of validity: 10.04.2017 to 26.01.2021 Date of issue: 10.04.2017

More information

European Technical Approval ETA-07/0025

European Technical Approval ETA-07/0025 European Technical Approval ETA-07/0025 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

Overcoming regulatory and certification barriers

Overcoming regulatory and certification barriers Overcoming regulatory and certification barriers Bart in t Groen (+ Koen Broess & Alma Tiggelman) DNV GL Opportunities for small wind turbines in urban areas 11 May, Brussels This project has received

More information

360 Support in all Matters. For Sustainable Investments. Comprehensive Services for Wind Energy.

360 Support in all Matters. For Sustainable Investments. Comprehensive Services for Wind Energy. 360 Support in all Matters. For Sustainable Investments. Comprehensive Services for Wind Energy. www.tuv.com Tailwind Right from the Start. TÜV Rheinland Wind Energy Services. Complex site conditions,

More information

Compatibility of renewable energies and nuclear power in the generation portfolio Technical and economical aspects

Compatibility of renewable energies and nuclear power in the generation portfolio Technical and economical aspects Compatibility of renewable energies and nuclear power in the generation portfolio Technical and economical aspects Verträglichkeit von erneuerbaren Energien und Kernenergie im Erzeugungsportfolio Technische

More information

European Technical Approval ETA-05/0069

European Technical Approval ETA-05/0069 European Technical Approval ETA-05/0069 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

Annex to the Accreditation Certificate D-ZE DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D-ZE DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-20531-01-00 DIN EN ISO/IEC 17065:2013 Period of validity: 18.05.2017 to 17.05.2022 Holder of certificate: TÜV Rheinland Rail

More information

Workshop #8: Certification of Lidar-Assisted Control Applications

Workshop #8: Certification of Lidar-Assisted Control Applications Workshop #8: Certification of Lidar-Assisted Control Applications Nikolai Hille, Steffen Raach, David Schlipf, Andrew Scholbrock, Eric Simley 2018 IEA Wind Task 32 General Meeting October 22, 2018 Loads

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11325-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 23.01.2017 to 22.01.2022 Holder of certificate: INDUSTRIE-LABOR

More information

National and International Standards for the Design of Offshore Substations. The Advantages of Offshore Substations Certification

National and International Standards for the Design of Offshore Substations. The Advantages of Offshore Substations Certification National and International Standards for the Design of Offshore Substations The Advantages of Offshore Substations Certification Folie 1 The two main Types of Certification Type or Component Certification

More information

Odour Regulation in Germany an improved system including odour intensity, hedonic tone and odour annoyance

Odour Regulation in Germany an improved system including odour intensity, hedonic tone and odour annoyance Odour Regulation in Germany an improved system including odour intensity, hedonic tone and odour annoyance Ralf Both*; Eckehard Koch** North Rhine-Westphalia State Environment Agency, Wallneyer Str. 6,

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18064-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 04.12. to 03.12.2022 Holder of certificate: Buderus

More information

3. IZMIR WIND SYMPOSIUM AND EXHIBITION October , 2015 TEPEKULE CONVENTION CENTRE IZMIR

3. IZMIR WIND SYMPOSIUM AND EXHIBITION October , 2015 TEPEKULE CONVENTION CENTRE IZMIR 3. IZMIR WIND SYMPOSIUM AND EXHIBITION October 8-9-10, 2015 TEPEKULE CONVENTION CENTRE IZMIR How LiDAR wind measurements can increase your project s value practical experience under different site conditions

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD IEC 61400-1 Third edition 2005-08 Wind turbines Part 1: Design requirements Reference number IEC 61400-1:2005(E) Publication numbering As from 1 January 1997 all IEC publications

More information

EAR TRAINING ON WIND TURBINE NOISE. Pierre Dutilleux 1, Joachim Gabriel DEWI GmbH, Wilhelmshaven, Germany

EAR TRAINING ON WIND TURBINE NOISE. Pierre Dutilleux 1, Joachim Gabriel DEWI GmbH, Wilhelmshaven, Germany EAR TRAINING ON WIND TURBINE NOISE Pierre Dutilleux 1, Joachim Gabriel DEWI GmbH, Wilhelmshaven, Germany Summary Internationally accepted methods are available for the characterisation of acoustic noise

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13424-01-00 according to DIN EN ISO/IEC 17025:2005 Date of issue: 02.07.2018 Holder of certificate: CSL Behring GmbH Plasma

More information

Validation for Thickness Measurement in Civil Engineering with Ultrasonic Echo

Validation for Thickness Measurement in Civil Engineering with Ultrasonic Echo ECNDT 2006 - Th.2.5.3 Validation for Thickness Measurement in Civil Engineering with Ultrasonic Echo Alexander TAFFE, BAM, Berlin, Germany Herbert WIGGENHAUSER, BAM, Berlin, Germany Abstract. Validation

More information

Avoiding wind turbine tonalities A structured, system based approach. Frederik Vanhollebeke ZF Wind Power Technology

Avoiding wind turbine tonalities A structured, system based approach. Frederik Vanhollebeke ZF Wind Power Technology Avoiding wind turbine tonalities A structured, system based approach Frederik Vanhollebeke Wind Power Technology 1 2014-12-10 EWEA Wind Turbine Sound 2014 Avoiding wind turbine tonalities Agenda 1. Wind

More information

We are Pavana THE WIND & SITE EXPERTS.

We are Pavana THE WIND & SITE EXPERTS. We are Pavana THE WIND & SITE EXPERTS. Pavana GmbH, based in Husum, is a leading expert for highly specialised services relating to the complex planning of your wind energy project. Our services are indispensable

More information

International Legislation for Wind Turbine Noise

International Legislation for Wind Turbine Noise International Legislation for Wind Turbine Noise Erik Koppen ARCADIS Nederland BV, Arnhem, The Netherlands. Kevin Fowler ARCADIS U.S., Inc., Carlsbad, California, USA. Summary The analysis of wind turbine

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13474 First edition 2009-06-15 Acoustics Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise

More information

Deutsches Institut für Bautechnik

Deutsches Institut für Bautechnik Deutsches Institut für Bautechnik Anstalt des öffentlichen Rechts 10829 Berlin, Kolonnenstraße 30 L Tel.: +49(0)30-78730-0 Fax: +49(0)30-78730-320 e-mail: dibt@dibt.de Ermächtigt und notifiziert gemäß

More information

European Technical Approval ETA-12/0456

European Technical Approval ETA-12/0456 European Technical Approval ETA-12/0456 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

SCOPE OF ACCREDITATION TO ISO/IEC

SCOPE OF ACCREDITATION TO ISO/IEC SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005 RADIOMETRICS MIDWEST CORPORATION 12 East Devonwood Avenue Romeoville, IL 60446 Joseph Strzelecki Phone: 815 293 0772 ELECTRICAL (EMC) Valid To: February 29,

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19890-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.11.2016 to 14.04.2020 Holder of certificate: Aktien-Gesellschaft

More information

What can Wind Technology nowadays do for ASEAN s Smart Energy Future?

What can Wind Technology nowadays do for ASEAN s Smart Energy Future? What can Wind Technology nowadays do for ASEAN s Smart Energy Future? For Renewable Energy Asia Conference 2017, by Dipl.-Ing. Eric Effern, CTO Windtest Grevenbroich GmbH 1 of 48 Nrs, Nrs, Nrs, Nrs, Nrs,

More information

Evance Iskra R9000 Acoustic Noise Assessment according to BWEA Performance and Safety Standard Summary. Issue 02

Evance Iskra R9000 Acoustic Noise Assessment according to BWEA Performance and Safety Standard Summary. Issue 02 Evance Iskra R9000 Acoustic Noise Assessment according to BWEA Performance and Safety Standard Summary Issue 02 Evance Unit 6 Weldon Road, Derby Road Industrial Estate, Loughborough, Leicestershire LE11

More information

European Technical Approval ETA-02/0030

European Technical Approval ETA-02/0030 European Technical Approval ETA-02/0030 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter

More information

技術情報. IEC International Electrotechnical Commission ISO International Organization for Standardization JIS IEC TC88 Technical Committee 88 JIS

技術情報. IEC International Electrotechnical Commission ISO International Organization for Standardization JIS IEC TC88 Technical Committee 88 JIS 技術情報 IEC International Electrotechnical Commission ISO International Organization for Standardization 1906 100 1988 TC88 Technical Committee 88 20 TC88 20 IEC JIS TC88 2008 10 TC88 2010 3 NREL; National

More information

References windtest grevenbroich gmbh

References windtest grevenbroich gmbh References windtest grevenbroich gmbh Company Profile More than 18 years of experience in an industry that is only little older. Since 1996, windtest grevenbroich gmbh (wtg) provides predominantly manufacturers,

More information

Incorporation Protection by Dismantling of Nuclear Facilities: A Presentation of the German Working Group

Incorporation Protection by Dismantling of Nuclear Facilities: A Presentation of the German Working Group Incorporation Protection by Dismantling of Nuclear Facilities: A Presentation of the German Working Group Gabriele Hampel, Department of Nuclear Medicine, Medical University of Hannover, Carl-Neuberg-Str.

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11097-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-11-19 to 2021-09-15 Date of issue: 2018-11-19

More information

Low-frequency noise incl. infrasound from wind turbines and other sources

Low-frequency noise incl. infrasound from wind turbines and other sources Low-frequency noise incl. infrasound from wind turbines and other sources Lorenz HERRMANN 1 ; Ulrich RATZEL 2 ; Otto BAYER 3, Klaus-Georg KRAPF 1, Martin HOFFMANN 3, Janosch BLAUL 1, Clemens MEHNERT 3

More information

Technical Guidelines. for Power Generating Units. Part 7: Maintenance of power plants for renewable energy. Category D2: Revision

Technical Guidelines. for Power Generating Units. Part 7: Maintenance of power plants for renewable energy. Category D2: Revision Technical Guidelines for Power Generating Units Part 7: Maintenance of power plants for renewable energy Category D2: State-Event-Cause code for power generating units (ZEUS) Terms, classification and

More information

CRUDE STEEL Crude steel that s as individual as your business

CRUDE STEEL Crude steel that s as individual as your business CRUDE STEEL Crude steel that s as individual as your business Customised properties, reliable delivery Variety from a single source the basis for tailor-made steel Crude steel from the GMH Gruppe is produced

More information

Stretch Ceiling CLIPSO Type 495D white with 10 mm Absorbent Material

Stretch Ceiling CLIPSO Type 495D white with 10 mm Absorbent Material BAE Fiedler Mühlweg 21 D-35633 Lahnau Germany Phone 0049 6441/9625-43 Fax 0049 6441/9625-44 Stretch Ceiling CLIPSO Type 495D white with 10 mm Absorbent Material Construction Height 10 mm Measurement of

More information

European Technical Approval ETA-05/0164

European Technical Approval ETA-05/0164 European Technical Approval ETA-05/0164 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

COMFREY WIND PROJECT. NOISE STUDY In Brown and Cottonwood Counties, Minnesota. For WESCO Wind 04/16/12

COMFREY WIND PROJECT. NOISE STUDY In Brown and Cottonwood Counties, Minnesota. For WESCO Wind 04/16/12 COMFREY WIND PROJECT NOISE STUDY In Brown and Cottonwood Counties, Minnesota For WESCO Wind 04/16/12 April 16, 2012 This report was undertaken to determine the noise impact on the area surrounding the

More information

European Technical Approval ETA-10/0352

European Technical Approval ETA-10/0352 European Technical Approval ETA-10/0352 - Original version in German language Handelsbezeichnung Trade name Zulassungsinhaber Holder of approval Zulassungsgegenstand und Verwendungszweck Generic type and

More information

Evaluation and projection of ultrasonic measurement on concrete foundations of the modern wind energy plant

Evaluation and projection of ultrasonic measurement on concrete foundations of the modern wind energy plant Abstract Evaluation and projection of ultrasonic measurement on concrete foundations of the modern wind energy plant Boris Resnik and Daniel Jakubowski Beuth University of Applied Sciences, Berlin, Gemany

More information

Deutsches Institut für Bautechnik

Deutsches Institut für Bautechnik Deutsches Institut für Bautechnik Anstalt des öffentlichen Rechts 10829 Berlin, Kolonnenstraße 30 L Tel.: +49(0)30-78730-0 Fax: +49(0)30-78730-320 e-mail: dibt@dibt.de Ermächtigt und notifiziert gemäß

More information

GUIDELINES FOR THE DETERMINATION OF BLOOD ALCOHOL CONCENTRATIONS (BAC) FOR FORENSIC PURPOSES - BAC Guidelines -

GUIDELINES FOR THE DETERMINATION OF BLOOD ALCOHOL CONCENTRATIONS (BAC) FOR FORENSIC PURPOSES - BAC Guidelines - German Society of Legal Medicine (DGRM), Society of Toxicological and Forensic Chemistry (GTFCh) and German Society for Traffic Medicine (DGVM) Rolf Aderjan, Thomas Daldrup, Herbert Käferstein, Dieter

More information

QUALITY OF SOFTWARE PRODUCTS FOR THE PREDICTION OF SOUND IMMISSION - STANDARDIZATION EFFORTS IN GERMANY

QUALITY OF SOFTWARE PRODUCTS FOR THE PREDICTION OF SOUND IMMISSION - STANDARDIZATION EFFORTS IN GERMANY inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE Paper IN2000/1044 http://confs.loa.espci.fr/in2000/001044/001044.pdf QUALITY

More information

ROMNEY WIND ENERGY CENTRE Specifications Report, Wind Facility. Romney Energy Centre Limited Partnership

ROMNEY WIND ENERGY CENTRE Specifications Report, Wind Facility. Romney Energy Centre Limited Partnership ROMNEY WIND ENERGY CENTRE Specifications Report, Wind Facility Romney Energy Centre Limited Partnership Document No.: 10021083-CAMO-R-06 Issue: D, Status: Final Date: 12 October 2017 IMPORTANT NOTICE AND

More information

66 items 70% of circulated products

66 items 70% of circulated products THE TREATY ON THE EURASIAN ECONOMIC UNION of May 29, 2014 1 Establishment and application of mandatory requirements to products in technical regulations Establishment of a single procedure of conformity

More information

Parameterization of Reactive Power Characteristics for Distributed Generators: Field Experience and Recommendations

Parameterization of Reactive Power Characteristics for Distributed Generators: Field Experience and Recommendations 2015 Power Engineering Society in the VDE (ETG). ETG-Fb. 147: International ETG Congress 2015 Parameterization of Reactive Power Characteristics for Distributed Generators: Field Experience and Recommendations

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 61400-13 First edition 2001-06 Wind turbine generator systems Part 13: Measurement of mechanical loads Aérogénérateurs Partie 13: Mesure des charges mécaniques IEC 2001 Copyright

More information

Wind Power Grid Integration - Grid Code Requirements & Compliance Schemes The German Case Lessons and Experiences

Wind Power Grid Integration - Grid Code Requirements & Compliance Schemes The German Case Lessons and Experiences Wind Power Grid Integration - Grid Code Requirements & Compliance Schemes The German Case Lessons and Experiences Dipl.-Wirt.-Ing. Julian Langstädtler / FGH Certification Office Dipl.-Wirt.-Ing. Frederik

More information

Quality Management of Software and Systems: Organization of Tests

Quality Management of Software and Systems: Organization of Tests Quality Management of Software and Systems: Organization of Tests Contents Organization of Quality Assurance and Quality Management Separation of Development and QA Test Documentation and Evaluation Standards

More information

Classification report Airbourne sound insulation of building elements

Classification report Airbourne sound insulation of building elements Classification report Airbourne sound insulation of building elements Test report 161 32407/Z9e*) *) This is a translation of the test report No. 161 32407/Z9 dated 9 th October 2006 Client Reynaers Aluminium

More information

Fixations lourdes dans le béton

Fixations lourdes dans le béton Fixations lourdes dans le béton AGRÉMENT TECHNIQUE EUROPÉEN ATE - 02/0030 Option 1 - Béton fissuré et non fissuré CHEVILLE FIXATIONS LOURDES - CS Cheville à expansion par serrage à couple contrôlé en acier

More information

IECRE OPERATIONAL DOCUMENT

IECRE OPERATIONAL DOCUMENT IECRE OD-501 Edition 1.0 2018-01-05 IECRE OPERATIONAL DOCUMENT IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications (IECRE System) Type and Component

More information

JORDAHL Anchor Channels JTA ETA-09/0338 SHEAR REINFORCEMENT SYSTEMS SHEAR CONNECTOR SYSTEMS FAÇADE CONNECTION SYSTEMS MOUNTING TECHNOLOGY

JORDAHL Anchor Channels JTA ETA-09/0338 SHEAR REINFORCEMENT SYSTEMS SHEAR CONNECTOR SYSTEMS FAÇADE CONNECTION SYSTEMS MOUNTING TECHNOLOGY CONNECTION SYSTEMS SHEAR REINFORCEMENT SYSTEMS SHEAR CONNECTOR SYSTEMS FAÇADE CONNECTION SYSTEMS MOUNTING TECHNOLOGY Anchor Channels JORDAHL Anchor Channels JTA ETA-09/0338 Valid until 17 June 2018 European

More information

Post-construction Yield Analysis. Performance and budget analysis for probabilistic yield modeling of operational wind plant

Post-construction Yield Analysis. Performance and budget analysis for probabilistic yield modeling of operational wind plant Post-construction Yield Analysis Performance and budget analysis for probabilistic yield modeling of operational wind plant Jessica Cameron, Asset Analyst EWEA Technology Workshop - Lyon 02/07/2012 NATURAL

More information

Noise Impact Assessment

Noise Impact Assessment APPENDIX C Noise Impact Assessment CBCL Limited Appendices NOISE IMPACT ASSESSMENT PUGWASH WIND FARM, NOVA SCOTIA Client Pugwash Wind Farm Inc. Contact Charles Demond Document No Issue B Status Classification

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-21039-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 27.02.2018 to 28.08.2019 Holder of certificate: Framatome

More information

according to Section 4.2 heroal-johann Henkenjohann GmbH & Co. KG Österwieher Str Verl Germany Window system heroal W65

according to Section 4.2 heroal-johann Henkenjohann GmbH & Co. KG Österwieher Str Verl Germany Window system heroal W65 Test Report Summary and Expert Statement No. 14-002745-PR02 (GAS-A01-04-en-01) for test report 14-002745-PR01 (PB Z06-A01-04-de-02) and 14-002745-PR01 (PB Z08-A01-04-de-02) dated 27 January 2015 Airborne

More information

Evidence of Performance Joint sound reduction of filling material

Evidence of Performance Joint sound reduction of filling material Evidence of Performance Test Report No. 13-002455-PR02 (PB-K05-04-en-01) ift Rosenheim 10.09.2013 Client Soudal N. V. Everdongenlaan 18-20 2300 Turnhout Belgium Product Designation Density Special features

More information

Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012

Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS-11074-02-00 according to DIN EN ISO/IEC 17020:2012 Period of validity: 21.12.2016 to 20.12.2021 Holder of certificate: TÜV

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 63049 Edition 1.0 2017-09 Terrestrial photovoltaic (PV) systems Guidelines for effective quality assurance in PV systems installation, operation and maintenance INTERNATIONAL

More information