* Approximate flow at 90 psig (6.3 bar) inlet pressure and 5 psig (0.35 bar) pressure drop. F07 FLOW CHARACTERISTICS

Transcription

1 ir line equipment F7 iniature Series 7 eneral Purpose Filter 1/" and 1/" s Compact design Protects air operated devices by removing liquid and solid contaminants Screw-on bowl reduces maintenance time Can be disassembled without the use of tools or removal from the air line aximum pressure: Transparent bowl: 15 psig (1 bar) etal bowl: 5 psig (17 bar) Transparent bowl: -3 to 15 F (-3 to 5 C) etal bowl: -3 to 175 F (-3 to C) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C) 5 µm or µm filter element ir quality: Within ISO 573-1, Class 3 and Class 5 (particulates) aterials ody: zinc Transparent bowl: Polycarbonate etal bowl: Zinc (without sight glass) : sintered polypropylene Elastomers: neoprene & nitrile For water extraction information please contact pplications Engineering. bar d. 1 odels listed include threads, automatic drain, transparent bowl and 5 µm element. odel Numbers Flow scfm (dm3/s) * Weight lbs (kg) 1/" F7 1 1T 19 (9). (.13) 1/" F7 1T (11.5). (.13) * pproximate flow at 9 psig (.3 bar) inlet pressure and 5 psig (.35 bar) pressure drop. lternative odels 1/" 1 1/" Not applicable Not applicable PORT SIZE: 1/" 5 µm ELEENT FLOW CHRCTERISTICS F7 ISO parallel Transparent etal 1.5 (37) 1.3 ().91 (3).73 (19).157 () Dia.5 (13) Deep.91 (3) T 5 µm 1 µm 3 utomatic anual... INLET PRESSURE: psig (bar) 5 (1.) (.) (.) 9 (.3) 1 () 15 (1) 1 (1). (15) **.3 (1).5 (1).7 (15) **.3 (1).1 (1) 1 1 scfm anual utomatic 1 dm 3 /s IR FLOW ** inimum clearance to remove bowl. ounting holes. LE-

2 F17 17 Series eneral Purpose Filter 3/", 1", 1-1/", 1-1/" s ISO Symbols uto anual Screw-on bowl reduces maintenance time Can be serviced without the use of tools or removal from the air line al visual service indicator al electrical service indicator also available aximum pressure: 5 psig (17 bar) -3 to 175 F (-3 to C) *ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C) 5 µm, or µm filter element ir quality: Within ISO 573-1, Class 3 and Class 5 (particulates) Nominal bowl size: 1 quart (1 liter) anual drain connection: Will fit 1/-7 and 1/- pipe thread. utomatic drain connection: Will fit 1/-7 and 1/- pipe thread. aterials ody: luminum : luminum sight glass: Pyrex Elastomers: Neoprene and nitrile Filter element 5 µm (5311-1): Sintered bronze µm (5311-3): Sintered bronze Replacement elements 17.9 (39)** odels listed include automatic drain, µm element, metal bowl with sight glass, and threads. odel Numbers Flow scfm (dm3/s)* Weight lbs (kg) Service kit** 3/" F17 3D 35 (153). (1.93) (all filters) 1" F17 3D 5 (1).15 (1.) 1 1/" F17 3D 5 (1).39 (1.99) 1 1/" F17 3D 5 (1).3 (1.95) * Typical flow with a µm element at 9 psig (.3 bar) inlet pressure and 5 psig (.35 bar) pressure drop. Service kit includes bowl o-ring, drain gasket, and element gasket. lternative odels 3/" 1" 1-1/" 1-1/" Not applicable Service Indicator With (visual) 1 With (electrical) Without 1/ Turn anual.75 (11).3 (11) al Service Indicator. (1) 1.5 (3).1 () 1.3 (7) 17. (1)** utomatic F17 al Service Indicator. (1) 1.5 (3) 1.75 (73).1 () SPP (1-1/" ported units only) C ISO parallel (not available with 1-1/" ported units) 1 quart (1 liter) metal with sight glass D 1 quart (1 liter) metal 5 µm 1 µm 3 utomatic anual bar d... 1 PORT SIZE: 1-1/" ELEENT: µm INLET PRESSURE: psig (bar g) 3 3 (1.) (.5) scfm dm 3 /s IR FLOW (.) (5.) (.3) (.) (1.) LE-5

3 ir line equipment F1 1 Series eneral Purpose Filter 1-1/" and " s ISO Symbols uto anual Highly visible, prismatic liquid level indicator lens Can be disassembled without removal from the air line al visual service indicator al electrical service indicator aximum pressure: 5 psig (17 bar) Operating temperature*: -3 to 175 F (-3 to C) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C). 5 µm, or µm filter element ir quality: Within ISO 573-1, Class 3 and Class 5 (particulates) anual drain connection: Will fit 1/-7 and 1/- pipe thread. utomatic drain connection: Will fit 1/-7 and 1/- pipe thread. - Flexible tube with 3/1" (5mm) minimum I.D. can be connected to the automatic drain. may fail to operate if the tube I.D. is less than 3/1" (5mm). void restrictions in the tube. aterials ody: luminum Intermediate body: luminum : luminum etal bowl liquid level indicator: Transparent nylon Filter element: Sintered bronze Elastomers: Neoprene and nitrile Replacement elements 5µm 5-11 µm () ** ody odels listed include automatic drain, µm element, metal bowl with sight glass, and threads. odel Numbers Flow scfm (dm3/s) * Weight lbs (kg) Service kit** 1-1/" F1 3D 1 (1) 1.9 (.7) " F1 C 3D 1 (1) 1.5 (.5) * Typical flow with a µm element at 9 psig (.3 bar) inlet pressure and 5 psig (.35 bar) pressure drop. ** Service kit contains body o-ring, element gasket, automatic drain gasket, and bowl o-ring. lternative odels 1-1/" " C Not applicable Service Indicator Without With pneumatic 1 With electrical Intermediate ody. (9).1 (7) 1. (7) () 3.5 (599) ** F1 al Service Indicator 3.1 () 15.7 (399) bar d ISO parallel etal with sight glass etal D 5 µm 1 µm 3 utomatic anual 1/ turn... 1 INLET PRESSURE: psig (bar g) PORT SIZE: " ELEENT: µm 3 (.5) 5 (.) 9 (.3) 11 (.) 15 (1.) 1 (1.5) 1 1 scfm utomatic 1/ Turn anual 1 dm 3 /s IR FLOW LE-

4 F39 Oil removal (Coalescing) Filter 1/" and 1/" s Compact design High efficiency oil and particle removal Screw-on bowl reduces maintenance time Can be disassembled without the use of tools or removal from the air line odels listed include threads, automatic drain and transparent bowl. aximum pressure: Saturated Flow* Dry Flow Transparent bowl: 15 psig (1 bar) odel Numbers Flow scfm (dm3/s) Flow scfm (dm3/s) Weight lbs (kg) Service Kit etal bowl: 5 psig (17 bar) 1/" F39 1 T. (.) 11. (5.3). (.13) /" F39 T. (3.) 1. (5.). (.13) 11-1 Transparent bowl: * aximum flow at 9 psig (.3 bar) inlet pressure to maintain stated oil removal performance. -3 to 15 F (-3 to 5 C) lternative odels etal bowl: -3 to 15 F (-3 to 5 C) F39 * ir supply must be dry enough to avoid ice formation at temperatures below C (35 F) 1/" 1 1/" Down to.1 µm ISO parallel ir quality: Not applicable Transparent T Within ISO 573-1, Class 1 (particulates) etal and Class (oil content) Not applicable aximum remaining oil content of air Coalescing leaving the filter:.1ppm at 7 F (1 C) with an inlet oil concentration of 17 ppm. aximum flow with 9 psig (.3 bar) inlet utomatic anual pressure : 1/ ports,. scfm (. dm3/s) 1.3 ().157 () Dia 1/ ports,. scfm (3 dm3/s).5 (13) Deep aximum flow to maintain stated oil removal performance. Nominal bowl size: 1 fluid ounce (31 ml) connection: (19) (3) 1/" pipe thread FLOW CHRCTERISTICS PORT SIZE: 1/" utomatic drain operation:. ELEENT: DRY Spitter type drain operates momentarily when a rapid change in air flow occurs or 1. INLET PRESSURE: psig (bar) when the supply pressure is reduced aterials (1.) (.5) (.) (.3) () (1) (1) ody: Zinc. :Transparent: Polycarbonate etal: Zinc. : Synthetic fiber and polyurethane foam Elastomers: Neoprene & nitrile utomatic bar d 1.5 (37). (15) **.91 (3) 1 1 scfm anual ** inimum clearance to remove bowl. 1 dm 3 /s IR FLOW ounting holes..3 (1).5 (1).7 (15) **.3 (1).1 (1) LE-7

5 ir line equipment F F Oil Removal (Coalescing) Filter 3/", 1", and 1-1/" s ISO Symbols utomatic and Semi utomatic anual High efficiency oil and particle removal Screw-on bowl reduces maintenance time Can be disassembled without the use of tools or removal from the air line Standard service indicator turns from green to red when the filter element needs to be replaced NOTE: Install an F17 filter with a 5 µm filter element upstream of the F filter for maximum service life. aximum pressure: 5 psig (17 bar ) -3 to 15 F (-3 to 5 C ) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C) Down to.1 µm ir quality: Within ISO 573-1, Class 1 (particulates) and Class (oil content) aximum remaining oil content in outlet air:.1ppm at 7 F ( C) with an inlet oil concentration of 17 ppm. Nominal bowl size: 1 quart US (1 liter) anual drain connection: Will fit 1/-7 and 1/- pipe thread. utomatic drain connection: Will fit 1/-7 and 1/- pipe thread. - Flexible tube with 3/1" (5mm) minimum I.D. can be connected to the automatic drain. may fail to operate if the tube I.D. is less than 3/1" (5mm). void restrictions in the tube. aterials ody: luminum : luminum sight glass: Pyrex Elastomers: Neoprene and nitrile Filter element: Synthetic fiber and polyurethane foam odels listed include service indicator, automatic drain, metal bowl with sight glass, and threads. odel Numbers aximum Flow* scfm (dm3/s) Weight lbs (kg) Service Kit** 3/" F 1 D 9 ().11 (1.) " F 1 D 15 (59).5 (1.) 1 1/" F 1 D 15 (59).9 (1.95) * aximum flow for oil-saturated element at 9 psig (.3 bar) inlet pressure to maintain stated oil removal performance. **Service kit contains coalescing element, element o-ring, bowl o-ring, and drain gasket. lternative odels F 3/" 1" 1-1/" ISO parallel Not applicable etal with sight glass D Service Life Indicator etal Without With (visual) 1 With (electrical) Coalescing utomatic anual.75 (11) 17.9 (39)** Service Indicator anual. (1).3 (11) 1.5 (3).1 () 1.3 (7) Service Indicator 17. (1)** utomatic. (1) 1.5 (3).1 () 1.75 (73) bar d.3..1 Typical Performance Characteristic INLET PRESSURE: psig (bar g) 3 (.5) 5 (.) 9 (.3) 11 (.) 15 (1.) aximum flow to maintain stated oil removal performance PORT SIZE: 1" ELEENT: COLESCIN, OIL STURTED scfm dm 3 /s IR FLOW LE-

6 F7 1 Series Oil Removal Filter (Coalescing) 1-1/" and " s ISO Symbols utomatic and Semi utomatic anual Can be disassembled without removal from the air line Standard service indicator al electrical service indicator aximum pressure: 5 psig (17 bar) -3 to 15 F (-3 to 5 C) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C). Down to.1 µm ir quality: Within ISO 573-1, Class 1 (particulates) and Class (oil content) aximum remaining oil content in outlet air:.1 ppm at 7 F ( C) with an inlet concentration of 17 ppm Nominal bowl size: 7 fluid ounce (. liter) anual drain connection: Will fit 1/-7 and 1/- pipe thread. utomatic drain connection: Will fit 1/-7 and 1/- pipe thread. - Flexible tube with 3/1" (5mm) minimum I.D. can be connected to the automatic drain. may fail to operate if the tube I.D. is less than 3/1" (5mm). void restrictions in the tube. aterials ody, intermediate body, bowl: luminum etal bowl liquid level indicator lens: Transparent nylon Filter element: Synthetic fiber and polyurethane foam Elastomers: Neoprene and nitrile Service indicator ody: Transparent nylon Internal parts: cetal Spring: Stainless steel Elastomers: Nitrile odels listed include service indicator, automatic drain, metal bowl with sight glass, and threads. ody and odel Numbers Flow scfm (dm3/s)* Weight lbs (kg) kit 1-1/" Standard F7-1-D 5 (11) (7.) std flow 33- " Standard F7-C1-D 3 (1) 1. (.7) hi-flow 33-5 " High Flow F7-C1-D (3).17 (1.) * aximum flow at 9 psig (.3 bar) inlet pressure to maintain stated oil removal performance. lternative odels F /" " C Standard body and element High flow body and element (use only with " ports) Service Indicator Without With (visual) 1 With (electrical) 39.9 (115) ** High Flow Filter with utomatic. (15)** 1/ turn drain 3.5 (599) uto drain 3. (1) ody. (9) Service Indicator utomatic.1 (7) 1. (7) 3.1 () 1/ turn drain 15.7 (399) uto drain (1) bar d INLET PRESSURE: psig (bar g) 3 (.5) aximum flow to maintain stated oil removal performance ISO parallel etal with sight glass D etal Coalescing utomatic anual, 1/ turn FLOW CHRCTERISTICS 5 (.) 9 (.3) 11 (.) 15 (1.) 175 (1.) 9 (.3) High Flow PORT SIZE: " ELEENT: STURTED scfm dm 3 /s IR FLOW LE-9

7 ir line equipment Ported Filter/Regulators 7, 39, and 3 Full flow gauge ports High efficiency oil and particle removal Excellent flow and regulation characteristics 7 aximum pressure Transparent bowl: 15 psig (1 bar) etal bowl: 5 psig (17 bar) Operating temperature* Transparent bowl: 3 to 15 F (-3 to 5 C) etal bowl: -3 to 15 F (-3 to 5 C) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C) 3 aximum pressure anual drain: 3 psig ( bar) Operating temperature: - to 175 F (- to C)* 5 µm filter element auge ports: 1/" 39 aximum pressure Transparent bowl: 15 psig (1 bar) etal bowl: 5 psig (17 bar) Operating temperature* Transparent bowl: -3 to 15 F (-3 to 5 C) etal bowl: -3 to 15 F (-3 to 5 C) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C) aterials 7 ody: zinc onnet: acetal Valve seat: acetal Transparent bowl: polycarbonate etal: zinc : sintered polypropylene Elastomers: nitrile 39 ody: zinc onnet: acetal Valve: brass/nitrile Valve seat: acetal Transparent bowl: Polycarbonate etal: zinc : synthetic fiber and polyurethane foam Elastomers: nitrile 3 ody: aluminum onnet: aluminum : aluminum djusting screw: steel s: High density polyethylene 5 µm: Ceramic pyrolith Elastomeric materials: synthetic rubber 7 odels listed include threads, transparent bowl, relieving diaphragm, gauge, automatic drain, 5 to 1 psig (.3 to 7 bar) outlet pressure adjustment range*. odel Number Flow scfm (dm3/s) Weight lbs (kg) 1/" 7 1 1K 13 (. dm3/s).57 (.) 1/" 7 1K 1 (.5 dm3/s).57 (.) 1/" 3 C 17 () 1.1 (.53) 1/" 39 1 K. (1.9).57 (.) 1/" 39 K. (1.9).57 (.) *Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. 3 LE-3

8 7 1.1 () 1.1 ().7 () 1.1 () 1.1 ().7 ().13 (5) 1.3 (1) 1.5 (3) Ported Filter/Regulators 7, 39, and 3 7 bar g psig 1 FLOW CHRCTERISTICS PORT SIZE: 1/" ELEENT: µm INLET PRESSURE: 15 psig (1 bar g) RNE: 5 to 1 psig (.3 to 7 bar).1 (1)**. (1). (1)**.9 (1) 1.5 (3) OUTLET PRESSURE 1 1 scfm anual ** inimum clearance to remove bowl Panel mounting hole diameter 1.19" (3 mm) Panel thickness:.5" ( mm) utomatic 1 dm 3 /s IR FLOW () 1.1 ().7 (). (1) 1.1 () 1.1 ().7 ().13 (5) 1.3 (1) 1.5 (3) 1.5 (3) 39 OUTLET PRESSURE bar g psig 1 FLOW CHRCTERISTICS PORT SIZE: 1/" INLET PRESSURE: 15 psig (1 bar g) RNE: 5 to 1 psig (.3 to 7 bar).1 (1)**. (1)**.9 (1) scfm dm 3 /s IR FLOW 3 FLOW CHRCTERISTICS - PORT SIZE: 1/" anual utomatic bar g psig INLET PRESSURE - 1 psig (7 bar g) 3.5 () 1. (3).5 ().95 (75) OUTLET PRESSURE (13) 1 1 scfm 1 dm 3 /s IR FLOW REULTION CHRCTERISTICS - PORT SIZE: 1/" 1/" bar g psig XIU RECOENDED FLOW THROUH 1/" PIPE 1% 1% % 1% FLOW scfm dm 3 /s (33)**.9 (53) 5.71 (19) OUTLET PRESSURE (79) ** inimum clearance required to remove bowl. Panel mounting hole diameter: 1.5" ( mm) aximum panel thickness:." ( mm) psig bar g INLET PRESSURE LE-31