Projected actual points. Responsible for UNC -- Project name. Remarks

Transcription

1 UNC LEED Checklist Total points available Projected Responsible for UNC -- Project name Cost documentation Sustainable Sites Prerequisite- Erosion and Sediment control Prerequisite REQ Y All campus projects meet this criteria. Site Selection All campus projects meet this criteria. UNC Development Density All main campus projects should meet this criteria. UNC Brownfield Redevelopment Main campus projects are not eligible for this credit. Alternative Transportation - Transit Chapel Hill Transit service should qualify. Work with DPS. UNC LEED campus Guidelines require secure bicycle storage with convenient Alternative Transportation- Bicycle changing/shower facilities within 500 yards of the building for at least 5% of Storage & Changing Rooms regular building occupants. UNC Alternative Transportation- Alternative Fueling Vehicles This point would be interpreted from LEED campus. UNC Alternative Transportation- Parking Capacity This is a possible credit. Public Safety needs to develop a campus wide plan with sufficient preferred parking for carpools and vanpools. UNC Reduced Site Disturbance- Protect or Restore Open Space Developed sites restore a minimum of 50% of the site area (excluding building footprint) by replacing impervious surfaces with native or adapted vegetation. Work with LA and Grounds. Reduced Site Disturbance- Development Footprint Exceed open space requirements in local zoning by 25% OR designate an open space area adjacent to the building that is equal to the development footprint. Stormwater Management- Rate and Quantity Campus stormwater standards should achieve. UNC/ Stormwater Management- Treatment Campus stormwater standards achieve. UNC/ Landscape needs to provide shade within 5 years for 30% of the site's nonroof impervious surfaces. Or place 50% of parking spaces underground or in Heat Island Effect- n Roof decks. UNC/ Heat Island Effect- Roof Use Energy Star compliant AND high emissivity roofing OR install a "green" roof for at least 50% of the roof area. (See Lawrence Berkeley National Laboratory's Cool Roofing Materials Database and the Cool Roof Rating Council Light Pollution Reduction Work with Electric Systems to achieve IESNA RP standard. UNC/ 1

2 Total pts available UNC -- Project name Water Efficiency Water Efficient Landscaping- Potable water reduced by 50% Depends on location and stormwater management approach. UNC/ Water Efficient Landscaping- Potable Use or irrigation Depends on location and stormwater management approach. UNC/ Waterfree urinals and low-flow fixtures alone are unlikely to be sufficient. Innovative Wastewater Technologies Consider a rainwater capture system for flushing toilets. Waterfree urinals and low-flow fixtures required in most applications. Additional savings are project-dependent. Specify closed-loop cooling for process heat loads, such as water distillation and scanning electron Water Use Reduction- 20% Reduction microscopes. /UNC 30% beyond Energy Policy Act of Consider ultra low-flow fixtures, Water Use Reduction- 30% Reduction controls, and rainwater harvesting. 2

3 Energy & Atmosphere Total pts available Fundamental Building Systems Commissioning Prerequisite REQ Y Form a commissioning team that excludes individuals directly responsible for project design and construction management. Review the design intent and the basis for design documentation. Incorporate commissioning requirements into the construction documents. Develop and implement a commissioning plan. Verify installation, functional performance, training, and O&M documentation. Complete a commissioning report. Minimum Energy Performance Prerequisite REQ Y Design the building to comply with ASHRAE/IESNA Standard CFC Reduction in HVAC & R Equipment Prerequisite REQ Y Zero use of CFC-based refrigerants in new base building HVAC & R systems. For renovations reusing existing base builidng HVAC equipment, complete a comprehensive CFC phaseout conversion. (Subject to UNC's district cooling system's CFC phaseout schedule.) Optimize Energy Performance Renewable Energy- 5% Renewable Energy- 10% Renewable Energy- 20% Reduce design energy cost compared to the energy cost budget for energy systems regulated by ASHRAE/IESNA Standard as demonstrated by a whole building simulation using the Energy Cost Budget Method described in Section 11 of the Standard. (Use UNC steam and chilled water rates and a combination of UNC and Duke Power electric rates.) To determine the Design Energy Cost, first perform a daylighting analysis of the design building early in schematic design using Radiance, Adeline, or another daylight-modeling tool. Use the daylighting results to create a design building energy simulation model using DOE2, TRANE Trace, or another hourly load and energy-modeling tool. Daylighting controls cannot be approximated by turning off the lighting in the model for a portion of the day. The proposed design model must simulate performance of the daylighting control in response to daylight availability. (See Building Energy Software Tools Directory Supply at least 5% of the building's total electricity use (as expressed as a fraction of annual electricity cost) through the use of on-site renewable energy systems. Supply at least 10% of the building's total electricity use (as expressed as a fraction of annual electricity cost) through the use of on-site renewable energy systems. Supply at least 20% of the building's total electricity use (as expressed as a fraction of annual electricity cost) through the use of on-site renewable energy systems. 3

4 Energy & Atmosphere - CONT Total points available Projected Cost Responsible for documentation Additional Commissioning Ozone Protection Measurement and Verification Green Power Implement the following additional commissioning tasks: 1.) A commissioning authority independent of the design team shall conduct a review of the design prior to the construction documents phase. 2.) An independent commissioning authority shall conduct a review of the construction documents near completion of the construction document development and prior to issuing the contract documents for construction. 3.) An independent commissioning authority shall review the contractor submittals relative to systems being commissioned. 4.) Provide the owner with a single manual that contains the information required for recommissioning building systems. 5.) Have a contract in place to review building operation with O&M staff, including a plan for resolution of outstanding commissioning-related issues within one year after construction completion date. Install base building level HVAC & R equipment and fire suppression systems that do not contain HCFCs or Halons. Install continuous metering equipment for the following end uses: Lighting systems and controls; Constant and variable motor loads; Variable frequency drive operation; Chiller efficiency at variable loads (kw/ton); Cooling load; Air and water economizer and heat recovery cycles; Air distribution static pressures and ventilation air volumes; Boiler efficiencies; Building-related process energy systems and equipment; Indoor water risers and outdoor irrigation systems. Provide at least 50% of the building's electricity from renewable sources by engaging in at least a two-year renewable energy contract. (NC GreenPower or TAGS) /UNC /UNC UNC 4

5 Materials & Resources Total pts available Storage & Collection of Recyclables Prerequisite REQ Y See Office of Waste Reduction and Recycling Standards UNC/ Maintain 75% of structure and shell, excluding window assemblies and nonstructural Building Reuse- Maintain 75% roofing material Building Reuse- Maintain 100% Maintain 100% of structure and shell, excluding window assemblies and nonstructural roofing material Building Reuse- Maintain 100% Maintain 100% of structure and shell, AND at least 50% of non-shell areas. Construction Waste Management- Divert 50% from Landfill See Office of Waste Reduction and Recycling Requirements. Construction Waste Management- Divert 75% from Landfill See Office of Waste Reduction and Recycling Requirements. Use salvaged, refurbished or reused materials, products and furnishings for Resource Reuse- 5% at least 5% of building materials. Resource Reuse- 10% Use salvaged, refurbished or reused materials, products and furnishings for at least another 5% of building materials. Recycled Content - 5% (PC + 1/2 PI) Recycled Content- 10% (PC + 1/2 PI) Regional Materials- 20% Manufactured Regionally Regional Materials- 50% Extracted Regionally Rapidly Renewable Materials 5% Certified Wood Use materials with recycled content such that the sum of post-consumer recycled content plus one-half of the post-industrial recycled content constitutes at least 5% of the total value of the materials in the project. Use materials with recycled content such that the sum of post-consumer recycled content plus one-half of the post-industrial recycled content constitutes at least 10% of the total value of the materials in the project. 20% of products and materials manufactured within a radius of 500 miles -- New York City to Pittsburgh to Columbus to Birmingham to Jacksonville 50% of the regionally manufactured products and materials are extracted, harvested or recovered within 500 miles. Use rapidly renewable products and materials (made from plants that are typically harvested within a ten-year cycle or shorter) ie., wheatboard casework, bamboo flooring. 50% of wood products are certified in accordance with the Forest Stewardship Council's Principles and Criteria. 5

6 Total pts available Indoor Environmental Quality Minimum IAQ Performance Prerequisite REQ Y Establish IAQ plan that meets the minimum requirements of ASHRAE and approved Addenda (see ASHRAE , Appendix H) using the Ventilation Rate Procedure. Designer Environmental Tobacco Smoke (ETS) Control Prerequisite REQ Y Smoking prohibited in all campus buildings. UNC Carbon Dioxide Monitoring Ventilation Effectiveness Install a permanent CO2 monitoring system that provides feedback on space ventilation performance in a form that affords operational adjustments. Focus on spaces with variable occupant densities and locations served by the longest lengths of ductwork. (See ASHRAE , Appendix C.) Design ventilation systems that result in an air change effectiveness greater than or equal to 0.9. (See ASHRAE and ASHRAE 2001 Fundamentals Handbook, Chapter 32, Space Air Diffusion.) UNC strongly encourages this performance level. (ME)/U (ME)/U Construction IAQ Management Plan - During Construction Meet recommended Design Approaches of SMACNA IAQ Guideline for Occupied Buildings under Construction, 1995, Chapter 3. Protect stored and installed absorptive materials from moisture damage. If air handlers must be used during construction, use MERV 8 filtration media. Replace all filtration media immediately prior to occupancy with MERV 13 filtration media. Construction IAQ Management Plan- Before Occupancy After construction and prior to occupancy conduct a two-week flushout with MERV 13 filtration media at 100% outside air. OR Conduct a baseline indoor air quality testing procedure consistent with EPA's Protocol for Environmental Requirements, Baseline IAQ and Materials for the RTP Campus, Section ( through 3.1) Low-emitting Materials- Adhesives & Sealants Specify and install products whose VOC content is less than South Coast Air Quality Management District (SCAQMD) Rule 1168 limits. ( AND Specify that all sealants used as fillers meet the Bay Area Air Quality Management District Requlation 8, Rule 51. ( Low-emitting Materials-Paints & Coatings Low-emitting Materials- Carpet Low-emitting Materials-Composite Wood Specify and install products whose emissions do not exceed the VOC and chemical component limits of Green Seal's Standard GS-11 Requirements. ( Specify and install carpets that meet the Carpet and Rug Institute's Green Label standard. ( Specify and install composite wood and agrifiber products that contain no added urea-formaldehyde resins. 6

7 Indoor Environmental Quality -- CONT Total pts available Indoor Chemical & Pollutant Source Control Employ permanent entryway systems (grills, grates, etc) to capture dirt, particulates, etc from entering the building at all high volume entryways. Where chemical use occurs (including housekeeping areas and copying/printing rooms), provide segregated areas with separate outside exhaust at a rate of at least 0.50 f3/min/ft2, no air re-circulation and maintaining a negative pressure of at least 7 PA. Provide drains plumbed for appropriate disposal of liquid waste in spaces where water and chemical concentrate mixing occurs. Controllability of Systems- Perimeter Spaces Provide high levels of ventilation and lighting system control by individual occupants or specific groups. Provide at least an average of one operable window and one lighting control zone per 200 square feet for all regularly occupied areas within 15 ft. of the perimeter wall. Controllability of Systems- n- Perimeter Spaces Thermal Comfort - Standard Thermal Comfort --Monitoring Daylight and views (75%) Dayight and views (90%) Provide controls for each individual for airflow, temperature, and lighting for at least 50% of the occupants in non-perimeter, regularly occupied areas. Comply with ASHRAE Standard , Addenda 1995, for thermal comfort standards, including humidity control within established ranges for this climate zone. Install a permanent temperature and humidity monitoring system configured to provide operators control over thermal comfort performance and the effecctiveness of humidification and/or dehumidification systems in the building. Achieve a minimum Daylight Factor of 2% (excluding direct sunlight penetration) in 75% of all space occupied for critical visual tasks. Exclude low-occupancy support areas. Achieve direct line of sight to vision glazing for building occupants in 90% of all regularly occupied spaces. 7

8 Total points available Projected Responsible for UNC -- Project name Cost documentation Innovation & Design Process Innovation s Possible 4 Combined Heat & Power 1 1 Award winning Combined Heat and Power Plant UNC Transit Incentives 1 1 Fare Free Transit and Commuter Alternatives Program UNC Water Reclamation 1 1 Reclaimed water used in campus chiller plants (2007) UNC Tree Protection 1 1 Mandatory Tree Protection Plan in all projects UNC LEED Certified Designer Points 1 1 Total Possible Points Mimimum Points 33 8