VSL Training course. From flow metering to the kilogram (Grand K) in Paris!
|
|
- Thomasina Franklin
- 6 years ago
- Views:
Transcription
1 VSL Training course From flow metering to the kilogram (Grand K) in Paris! VSL Dutch Metrology Institute National Metrology Institute for The Netherlands Jos Verbeek Erik Smits Content - Introduction Jos, Erik and participants - TNO, VSL, NMi, Verispect and Euroloop - VSL - Calibration - R&D - Customizing Metrology - Some services and activities of VSL - Open training program Metrology and Measurement 1
2 Jos Verbeek Quality Management (VSL) Senior Consultant Quality & Metrology (VSL) Assessor Dutch Council for Accreditation (RvA) Expert International Quality Infrastructure Projects (EU) Expert Pressure, Mass, Force, ISO/IEC 17025:2005, ISO/IEC 1043:2010 Erik Smits Senior Metrologist (VSL) Project leader for commercial projects (VSL) Assessor Dutch Council for Accreditation (RvA) Member of Euramet TC-Flow, BIPM CCM s working group for fluid flow (WGFF) and working on the revision of OIML Recommendation R119 Expert Flow, Volume, related quantities, ISO/IEC 17025:2005 see LinkedIn profile 2
3 Participants - Name - Company - Country - Job - Why do you attend the European Flow Measurement workshop? VSL Member of TNO Companies - Accredited laboratory; - Work under ILAC regulations; - Calibration large gas flow meters up to 60 Pa 10 5 ; - Calibration of large hydrocarbon flow meters. Calibrations performed in the Netherlands only for customers around the world. - Inspection and enforcement for MID (legal metrology) in the Netherlands; - Member of OIML on behave of the Dutch government; - Gaming. The Netherlands only. - Notified body for MID (legal metrology) in Europe; - Member of OIML; - Type approval and system certifications; - Verifications; - Gaming. Offices around the world. - National Metrology Institute (NMI) of the Netherlands; - Member of BIPM; - Maintaining the National measurement standards (kg, s, m, etc..); - Traceable services to SI units (calibrations); - R&D new measurement standards; - Training sharing knowledge; - Consultancy and certification and auditing. Services around the world. 3
4 VSL National Metrology Institute Van Swinden Laboratory Jean Henri van Swinden VSL History Jean Henri van Swinden, the person after whom VSL (Van Swinden Laboratory) is named, gave the original metre (a platinum rod) to the French government. The first Metrology Act was implemented in the Netherlands. The Netherlands became a member of the Metre Convention. Dienst van het IJkwezen, part of the Ministry of Economic Affairs Privatisation of measurement standards, legal metrology (NMi) All shares from government to TNO VSL operating as an independent company Jan Hendrik van Swinden 4
5 VSL tasks and services Research and Development - Development/maintenance national measurement standards - International traceability assurance - Research in metrology and measurement systems Calibration and Reference materials - Calibrations - Reference materials - Proficiency testing, inter-laboratory comparisons Customized Applied Metrology - Consultancy - R&D Contracts - International projects, Training In the calibration laboratories of VSL Length Temperature and humidity Electricity Time and frequency Viscosity Chemistry Gas flow Optics Mass Liquid flow and volume Ionising radiation Pressure 5
6 VSL services in the world Calibration and certification of Cameron - Caldon s flow rig in Pittsburgh, USA Validation of fiscal gas metering station Aqaba in Jordan R&D (EMRP and EMPIR) VSL is involved in projects like: - Liquefied Natural Gas (LNG) - Characterization of energy gases - Fuels for the future (Biofuels) - Metrology for drug delivery - Sensor development and calibration method for inline detection of viscosity and solids content of non-newtonian fluids 6
7 Open training at VSL in Basic Metrology (1day, 14 April and 22 September) - Temperature measurement (1 day, 21 May and 15 October) - Uncertainty calculation (3 days, June and November) - Basic pressure measurement (2 days, 6-7 October) - Gas flow metrology 5 days (5 days, 9-13 November) Location Delft, The Netherlands Metrology What is metrology? Metrology = Science of measurement It s important to have: Comparable and Reliable measurements - Measurement system (good definitions) - Unbroken chain of calibration and comparisons to (inter)national measurement standards - Specified uncertainties 7
8 Metrological design of flow applications How reliable and comparable can a flow meter operate when influenced by the surrounding environment? Piping (flow profile) Fluid properties Pressure Temperature Human errors Vibrations Design errors Air in liquid EMC Liquid in air Leaking valves Environmental conditions Etc. VSL Measurements when important should always be: Beyond all doubt! 8
9 Remember - In the Netherlands we have different organizations for different Metrology tasks - VSL is organized different then other NMI s - Calibration - R&D - Customizing Metrology - The services of VSL - Measurement should be Comparable, Reliable and Beyond all doubt VSL PO Box AR Delft The Netherlands T F E info@vsl.nl I Erik Smits E fsmits@vsl.nl VSL group: VSL Fluid Flow Metrology group: Jos Verbeek E jverbeek@vsl.nl Questions? 9
NATA Policy on Calibration and Measurement Traceability
NATA Policy on Calibration and Measurement Traceability Paul McMullen Sector Manager, Calibration This Session 1. VIM Definitions Calibration and Metrological Traceability 2. Previous Policy on Metrological
More informationCalibration Guide. Reliability through traceability
The Golden Ratio. Ever since the ancient times mathematicians, architects, artists, and composers studied this phenomenon. Even in nature, we find the Golden Ratio. A special measure with special applications.
More informationWhat s Up With AASHTO and AMRL?
What s Not New What s Up With AASHTO and AMRL? Time between on-site assessments ISO/IEC 17025 Robert A. Lutz AASHTO Materials Reference Laboratory (AMRL) Time Between On-Site Assessments Will the interval
More informationDevelopment of a metrology system difference between legal metrology and industrial metrology
COOPERATION IN METROLOGY: Development of a metrology system difference between legal metrology and industrial metrology Manfred Kochsiek Metrology Consultant 1 My professional background Mechanical engineer,
More informationCRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES Prepared by: Technical Manager Approved by: Chief Executive Officer Approval Date: 2017-08-10 Effective
More informationA016 Traceability of measurement results compared to national and international measurement standards
08.04.2016 Version 08 Page 1 de 9 A016 Traceability of measurement results compared to national and international measurement standards Modifications: p 2 South Lane Tower I 1, avenue du Swing L-4367 Belvaux
More information(L)NG composition measurements
(L)NG composition measurements Adriaan van der Veen Jianrong Li Gerard Nieuwenkamp VSL R&D chemistry LNG II training course London, 15 June 2016 (Liquefied) Natural gas measurement VSL - Beyond all doubt
More informationAmerican Association for Laboratory Accreditation
Page 1 of 14 The following pages present R205 Specific s: Calibration Laboratory Accreditation Program (dated September 2005) in checklist format. All laboratories seeking accreditation in the Calibration
More informationWorld s first LNG research and calibration facility
World s first LNG research and calibration facility P. Lucas 1, O. Büker 2, A. Kenbar 3, H. Kolbjørnsen 4, K. Rasmussen 5, G. Rathwell 6, M. Safonova 7, K. Stolt 2, M. P. van der Beek 1 1 VSL Dutch Metrology
More informationOIML D 14 DOCUMENT. Edition 2004 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION. Training and qualification of legal metrology personnel
INTERNATIONAL DOCUMENT OIML D 14 Edition 2004 (E) Training and qualification of legal metrology personnel Formation et qualification des personnels de métrologie légale OIML D 14 Edition 2004 (E) ORGANISATION
More informationLecturer introduction
Lecturer introduction Lecturer, affiliation Dr. Bojan Acko, assistant professor University of Maribor Faculty of Mechanical Engineering SI-2000 Maribor, Smetanova 17 Slovenia Laboratory for Production
More informationDOCTOR'S DEGREE THESIS
University in Ljubljana Faculty for Electrical Engineering Tanasko Tasić Special aspects of validation of software in legal metrology DOCTOR'S DEGREE THESIS Ljubljana, 2009 University in Ljubljana Faculty
More informationEURAMET 2020 Strategy
European Association of National Metrology Institutes EURAMET 2020 Strategy Issued: Version: 1 EURAMET e.v 2020 Strategy Document: G-GNP-STR-002 Version: 1 Approved: GA 2011-09-15 EURAMET 2020 Strategy
More informationFQS Accreditation for forensic testing agencies NEMC ANSI-ASQ National Accreditation Board
FQS Accreditation for forensic testing agencies ISO Guide d 34 for f Environmentall Labs b NEMC 2012 ANSI-ASQ National Accreditation Board ISO/IEC 17025 Calibration and Testing Labs ISO/IEC 17020 Inspection
More informationVWR International Ltd
Orion Business Campus, Northwest Business Park, Ballycoolin, Blanchardstown, Dublin 15 Calibration Laboratory Registration number: 018C is accredited by the Irish National Board (INAB) to undertake calibration
More informationCertified according to DIN EN ISO 9001:2008 Accredited according to DIN EN ISO/IEC 17025:2005
Viscosity Length equipment Electricity Pressure ph Volume Gauge blocks Mass Electrolyt. conductivity ZMK ANALYTIK- GmbH Density Humidity ZMK GmbH Temperature Time / frequency Torque Balances Certified
More informationOrganization Name Address Contact Details R 76:1992 R 76:2006. Any restriction(s) should be specified in the appropriate Annex(es).
OIML CERTIFICATION SYSTEM (OIML-CS) Test Laboratory Application Form 1. Country: 2. OIML Issuing Authority: 3. Test Laboratory 3.1 Details: Organization Name Address Contact Details Name: Tel: E-mail:
More informationInternational Standards for Biotechnology
Bureau International des Poids et Mesures International Standards for Biotechnology Dr R I Wielgosz BIPM BIPM - 2011 1 International Compatibility of Measurement Standards The task of the BIPM is to ensure
More informationAmerican Association for Laboratory Accreditation
ISO 15189 Page 1 of 17 Accredited clinical laboratories are required to meet the following additional requirements as contained in P905 - A2LA Metrological Traceability Policy for ISO 15189 Laboratory
More informationIndustrial and scientific metrology: road to a developed NMI Andy Henson Director of International Liaison and Communications
Bureau International des Poids et Measures Industrial and scientific metrology: road to a developed NMI Andy Henson Director of International Liaison and Communications April 2014 1 The BIPM Is the International
More informationMVS. Traceability Document MULTICHANNEL VERIFICATION SYSTEM
MVS MULTICHANNEL VERIFICATION SYSTEM Traceability Document 25 Bradley Drive Westbrook, Maine USA 04092-2013 tel: 207-854-0860, toll free: 1-888-406-3463 fax: 207-854-0867 email: orders@artel-usa.com email:
More informationLNG Flow Calibration
LNG Flow Calibration Oswin Kerkhof OKerkhof@vsl.nl Gertjan Kok, Peter Lucas, Mijndert van der Beek, Erik Smits, Andrea Peruzzi, Gerard Blom, Inge van Andel, Jan van Geel Anders Andersson, Krister Stolt
More informationTECHNICAL AND PRODUCTION REQUIREMENTS of ISO Guide 34:2009
SANAS Accr. No/s. TECHNICAL AND PRODUCTION REQUIREMENTS of ISO Guide 34:2009 Date/s of evaluation Assessor/s & Observers Facility Area / field of Representative operation This report covers the following:
More informationThe role of accreditation bodies and EQA organisers in the. specifications
The role of accreditation bodies and EQA organisers in the assessment of analytical quality specifications Ian Mann Swiss Accreditation Service ian.mann@sas.ch Content Important partners and aspects of
More informationPRESENTATION OVERVIEW
Conformance and Interoperability (C&I) Validation Workshop for EAC Region Laico Regency Hotel, Nairobi, Kenya 21st 23rd October 2015 PART 2 Requirements for Accreditation Bodies and Testing Laboratories
More informationThe global development and future of natural gas measurement
The global development and future of natural gas measurement Jacob Freeke, Director Marketing Daniel Ultrasonic 13 May, 2015 Grand opening of the world s largest closed loop for high-pressure calibration
More informationEA MULTILATERAL AGREEMENT Facilitating cross border trade with reliable goods and services
EA MULTILATERAL AGREEMENT Facilitating cross border trade with reliable goods and services The importance of accreditation of conformity assessment bodies has substantially increased over the last decades.
More informationCalibrations at BIPM using the present definition of the kilogram
CCM Workshop on the mise en pratique of the new definition of the kilogram 21-22 November 2012, Sèvres Calibrations at BIPM using the present definition of the kilogram Pauline Barat, Hao Fang, Cécile
More informationMeasurement Canada s role in Timber Measurement
Measurement Canada s role in Timber Measurement TMS Meeting, Ferndale, WA - April 2013 Fair Measure For All Measurement Canada is responsible for ensuring the integrity and accuracy of measurement in the
More informationEuropean MID Directive for Custody Transfer Measuring Instruments Proven, certified technology for Fiscal & Custody transfer applications
European MID Directive for Custody Transfer Measuring Instruments Proven, certified technology for Fiscal & Custody transfer applications European Metrology Directive Legal metrology in Europe has undergone
More informationLNG Quality and Quantity Measurement
LNG Quality and Quantity Measurement Dr. Thomas Wu National Metrology Centre Email: thomas_wu@nmc.a-star.edu.sg LNG Measurements Roundtable, WMD 2017 Conference, Singapore 19 May 2017 Copyright 2017 All
More informationMetrology in Industry. The Key for Quality
Brochure More information from http://www.researchandmarkets.com/reports/2179387/ Metrology in Industry. The Key for Quality Description: Metrology is an integral part of the structure of today s world:
More informationISO/IEC 17025:2017 Working Document Instruction Page
Instruction Page NOTES: 1. This working document is intended as a checklist for the assessor when conducting Testing and Calibration Laboratory and Sampling Organization Assessments according to ISO/IEC
More informationGuidelines for CIPM key comparisons
Guidelines for CIPM key comparisons RMO KC SIM APMP RMO KC NORAMET CARIMET BIPM Comparaciones CIPM Key clave comparisons del CIPM EUROMET RMO KC SADCMET RMO KC COOMET RMO KC Luis Omar Becerra Importance
More informationEmerson in the LNG market chain. Emerson Flow Portfolio & Solutions in the LNG supply chain. Skangas MID solution to comply with GIIGNL
Emerson in the LNG market chain Emerson Flow Portfolio & Solutions in the LNG supply chain Skangas MID solution to comply with GIIGNL Energy measurement: Emerson s response to full compliance of the Int
More informationExamples of reference materials
Examples of reference materials JCTLM Working Group for Traceability: Education and Promotion (WG-TEP) Area 2: Mini-presentations to explain scientific concepts What are reference materials? Reference
More informationISO/IEC 17025:2017 Transition Webinar Questions & Answers
Contents 1. Complaints... 1 2. Decision Rules... 2 3. General... 3 4. MS Options... 4 5. Risk... 5 6. Sampling... 6 7. Traceability... 7 8. Transition... 8 1. Complaints Is the Complaints process expected
More informationA02 Assessment Rating Guide Revision 2.9 August 21, 2016
Revision 2.9 August 21, 2016 Laboratory Name: Assessment Date: (Lead) Assessor: Signature: ! TABLE OF CONTENTS 1.0! INTRODUCTION... 1 2.0! ASSESSOR NOTES ON THE USE OF CALA A02 ASSESSMENT RATING GUIDE...
More informationDe-Mystifying Calibration Accreditation 15 Jan 2013
De-Mystifying Calibration Accreditation 15 Jan 2013 Ryan Fischer Laboratory Accreditation Bureau Chair, NCSLI 183 Accreditation Resources Committee Bob Stern Agilent Technologies, Inc. Co-chair, NCSLI
More informationWorldwide Flowmeter Calibration Facilities and Markets
1. 27 Water Street Wakefield, MA 01880 USA +1 781-245-3200 +1 781-224-7552 (fax) www.flowresearch.com Worldwide Flowmeter Calibration Facilities and Markets Two new studies designed for flow calibration
More informationTechnical Specifications and General Guidelines for Mass Flow Meters at Petroleum Oil Installations. Note:
Technical Specifications and General Guidelines for Mass Flow Meters at Petroleum Oil Installations Note: These are general specifications and guidelines for Mass Flow Meters for Petroleum Oil Installations.
More informationJOIN US! NCSL INTERNATIONAL. Membership opens doors to personal growth and career advancement
JOIN US! NCSL INTERNATIONAL Membership opens doors to personal growth and career advancement NCSL INTERNATIONAL IS YOUR LINK TO MEASUREMENT SCIENCE FORUMS TOUCHING MANY INDUSTRIES... NCSL International
More informationEURO-ASIAN COOPERATION OF NATIONAL METROLOGICAL INSTITUTES
DPR of Korea Kazakhstan Kyrgyzia Lithuania Georgia Germany Сuba Bulgaria Belarusia Azerbaijan EURO-ASIAN COOPERATION OF NATIONAL METROLOGICAL INSTITUTES Armenia Uzbekistan TC 1.4 Flow measurement NSC Institute
More informationTWINNING PROJECT FICHE
TWINNING PROJECT FICHE 1 BASIC INFORMATION 1.1 Programme: ENPI Action Programme 2008 for Ukraine 1.2 Twinning Number: UA10/ENP-PCA/TR/24 1.3 Title: Further development of National Accreditation Agency
More informationA2LA. R104 - General Requirements - ISO-IEC Accreditation of Field Testing and Field Calibration Laboratories
and Field Calibration Page 1 of 15 R104 - General Requirements - ISO/IEC 17025:2017 Accreditation of Field Testing and Field Calibration 2018 2018 by A2LA All rights reserved. No part of this document
More informationISO GUIDE 34: 2009 WORKING DOCUMENT
GUIDE 34: 2009 WORKING DOCUMENT NOTES: 1. This working document is intended as a checklist for the assessor when conducting Reference Material Producer (RMP) Accreditation Assessments according to ISO
More informationGetting Started with ISO in Your Lab: Introduction to Resources, Training, Implementation, and Timelines for Earning Accreditation
Getting Started with ISO 15189 in Your Lab: Introduction to Resources, Training, Implementation, and Timelines for Earning Accreditation Topics What is ISO 15189? What is Accreditation? Preparing for Assessment
More informationGeneral Requirements for the Competence of Testing and Calibration Laboratories
ISO 17025:2005 POSITION PAPER General Requirements for the Competence of Testing and Calibration Laboratories EXECUTIVE SUMMARY This position paper provides a high-level overview of how LabVantage supports
More informationAccreditation of Reference Material Producers
Wilton Park House, Wilton Place, Dublin 2, Ireland Tel +353 1 607 3003 Fax +353 1 607 3109 E-mail inab@inab.ie Web www.inab.ie Accreditation of Reference Material Producers PS21 1) Purpose This statement
More informationSANAS Accr. No/s. F Date/s of evaluation
ISO/IEC 17020: 2012 Generic Checklist for Accreditation of Various Types of Bodies Performing Inspection to ISO/IEC 17020:2012, incorporating TR 80: Technical Requirements for Inspection Bodies in the
More informationJOB DESCRIPTION: LEAD ASSESSOR
Page of 6 203-2-29 Prepared by: Mulugeta Mekonnen Signature: Approved by: Araya Fesseha Signature: CONTENTS Purpose and scope... 2 2 References... 2 3 Selection Criteria... 2 4 Training... 3 5 Responsibilities...
More informationTraceability. There are two types of traceability: direct and indirect.
People Plus Precision Rice Lake Weighing Systems mass calibration laboratory has been awarded the NIST/NVLAP recognition of excellence. We are proud of our lab and our metrology staff. They continue to
More informationTitle Requirements for the accreditation of calibration laboratories
Title Requirements for the accreditation of calibration laboratories Reference RT-25 Revision 05 Date 18-07-2017 NOTE: The present document represents the English version of document under reference at
More informationPreparation Approval Authorisation Application date. Directive Council The President
Title Proficiency Testing Reference RT-24 Revision 02 Date 2015-10-27 NOTE: The present document represent the English version of document under reference at the specified revision. In case of conflict
More informationMeeting the ISO/IEC Requirements for Traceability and Measurement Uncertainty. APLAC Approaches. Dr Bernard King NARL, Australia
Meeting the ISO/IEC 17025 Requirements for Traceability and Measurement Uncertainty APLAC Approaches Dr Bernard King NARL, Australia Interpretation of ISO/IEC 17025 Requirements Extensive consultation
More informationSADCAS POLICY ISO/IEC 17020:2012 TRANSITION
SADCAS POLICY ISO/IEC 17020:2012 TRANSITION Prepared by: SADCAS Approved by: SADCAS CEO Approval Date:2012 09 25 Effective Date: 2012 10 01 Page 1 of 11 Table of Contents Page 1. INTRODUCTION... 3 2. TRANSITION
More informationGlobal Calibration Gases LLC
Global Calibration Gases LLC 1090 Commerce Blvd N Sarasota, FL 34243 www.globalcalibrationgases.com ISO 17025:2005 Accredited For Calibration and Testing PGVP: N22016 GLOBAL CALIBRATION GASES IS A WORLD
More informationOIML B 15 BASIC PUBLICATION. Edition 2006 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION
BASIC PUBLICATION OIML B 15 Edition 2006 (E) International Organization of Legal Metrology Strategic Plan Organisation Internationale de Métrologie Légale Plan Stratégique OIML B 15 Edition 2006 (E) ORGANISATION
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies
INTERNATIONAL STANDARD ISO/IEC 17011 First edition 2004-09-01 Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies Évaluation de la conformité Exigences
More informationChinese regulations on IVDs and traceability requirements
Chinese regulations on IVDs and traceability requirements Hongmei Li CMD/NRCCRM NIM China NOV 30,2015 at BIPM Outline 1. IVD In China 2. China s Efforts on IVD traceability 3. Future Demands and Tendency
More informationPotential Economic Impact Of The CIPM Mutual Recognition Arrangement
PUBLIC SERVICES APRIL, 2002 Potential Economic Impact Of The CIPM Mutual Recognition Arrangement Final Report Submitted to: BIPM Sèvres, France Prepared by: Dr. Mark MacDonald Ms. Daniela De Cecco Dr.
More informationRaad voor Accreditatie (Dutch Accreditation Council RvA) Accreditation of Reference Material Producers
Raad voor Accreditatie (Dutch Accreditation Council RvA) Accreditation of Reference Material Producers Document code: RvA-T034-UK Version 4, 01 mei 2013 A RvA-Explanatory note describes the policy and/or
More informationThe new ISO/IEC 17025:2017
The new ISO/IEC 17025:2017 By Dr. George Anastasopoulos Director, Conformity assessment, IAS Email: ganastasopoulos@iasonline.org Introduction - Background information ISO/IEC 17025 was first issued in
More informationAmerican Association for Laboratory Accreditation. MTAC - A Summary of Critical Decisions
Page 1 of 6 MTAC - A Summary of Critical Decisions This document provides a summary of consensus decisions voted on and approved by the A2LA and the A2LA Criteria Council (CC) for use by laboratories and
More informationEconomy Report. United States of America
24 th APLMF Meeting Siem Reap, Cambodia Economy Report United States of America Report developed by: Ralph Richter, P.E. Position: Senior Engineer Organization: National Institute of Standards and Technology
More informationRecognized Experts. Competence Area
1(4) Recognized Experts Competence Area This memo concerns the content of detailed instructions for the evaluation and approval of recognized experts in accordance with section 48, subsection 2 of the
More informationSIERRA LEONE STANDARDS BUREAU
SIERRA LEONE STANDARDS BUREAU THE ROLE OF STANDARDS IN PROMOTING SUSTAINABLE AGRICULTURE AND FOOD SECURITY IN AFRICA 21 ST ARSO GENERAL ASSEMBLY 12 AUGUST 2015 Presented by Ing. James S. Dumbuya Executive
More informationTWINNING PROJECT FICHE. Building the Capacity of the Egyptian National Institute of Standards in the Field of Metrology
TWINNING PROJECT FICHE Building the Capacity of the Egyptian National Institute of Standards in the Field of Metrology Under the Support to the Implementation of the Action Plan and Association Agreement
More informationQuality assurance of automated measuring systems
InfoMil Factsheet L40-7C AIR Quality assurance of automated measuring systems Continuous measurements This factsheet is part of the L40 series Measurement of air emissions. L40 consists of a manual that
More informationINTERPRETATION AND GUIDANCE ON THE ESTIMATION OF UNCERTAINTY OF MEASUREMENT IN TESTING
KAN-G-20 INTERPRETATION AND GUIDANCE ON THE ESTIMATION OF UNCERTAINTY OF MEASUREMENT IN TESTING Issue number : 1 April 2016 Komite Akreditasi Nasional National Accreditation Body of Indonesia Gedung I
More informationHow to Set Up and Manage Quality Control and Quality Assurance
How to Set Up and Manage Quality Control and Quality Assurance Myriam Visschedijk 1, *, Rik Hendriks 2 and Katrien Nuyts 3 1 TNO Quality of Life, The Netherlands 2 Johnson & Johnson Pharmaceutical Research
More informationUKAS Accreditation for IQIPS. Laura Booth Assessment Manager
UKAS Accreditation for IQIPS Laura Booth Assessment Manager Overview Accreditation UKAS IQIPS Scheme What assessors look for IQIPS update Benefits of accreditation Accreditation ISO/IEC 17000 define accreditation
More informationREQUIREMENTS FOR ACCREDITATION OF INSPECTION BODIES
NATIONAL CENTRE FOR ACCREDITATION REQUIREMENTS FOR ACCREDITATION OF INSPECTION BODIES according to SM SR EN ISO/IEC 17020:2013 Code DR-OI-07 Edition 2 Page 1/15 Approved by Technical Certification Committee
More informationRefueling and filling made easy
Refueling and filling made easy Precise flow measurement technology for: Compressed natural gas (CNG) Liquefied natural gas (LNG) Liquefied petroleum gas (LPG) AdBlue Endress+Hauser Your Partner Endress+Hauser
More informationA2LA. R231 Specific Requirements: Threat Agent Testing Laboratory Accreditation Program. December 6, 2017
Laboratory Page 1 of 17 Laboratory December 6, 2017 2017 by A2LA All rights reserved. No part of this document may be reproduced in any form or by any means without the prior written permission of A2LA.
More informationPROJECT DESIGN DOCUMENT FORM (CDM PDD)
CDM Executive Board Document Typology Revision of Monitoring Plan version 0.5 dd 15 October 2009 UNFCCC Project Reference CDM Registration 1144 Project Title Tambun LPG Associated Gas Recovery and Utilization
More informationCEN Keymark Scheme Rules for Thermostatic Radiator Valves. 2 nd Edition
CEN Keymark Scheme Rules for Thermostatic Radiator Valves 2 nd Edition Content Foreword... 3 Introduction... 3 1 Scope... 4 2 References... 4 3 Terms and Definitions... 4 4 Application... 5 4.1 Product
More informationEvolving Needs for Metrology in Trade, Industry and Society and the Role of the BIPM
Bureau International des Poids et Mesures Evolving Needs for Metrology in Trade, Industry and Society and the Role of the BIPM A report prepared by the CIPM for the governments of the Member States of
More informationBemis Laboratory Services
Bemis Laboratory Services Kilbeggan Road, Clara, Co. Offaly Testing Laboratory Registration number: 263T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule
More informationAbsolutely. Positively. Precise.
1 Absolutely. Positively. Precise. Troemner s Philosophy Calibration & Traceability Philosophy Troemner is the world s largest independent mass calibration company. Our philosophy is to provide the highest
More informationOil & Gas Flow Solutions for Fiscal Measurement
Oil & Gas Flow Solutions for Fiscal Measurement Emerson Oil & Gas Flow Solutions for Fiscal Measurement Performance requirements have become more stringent with unrelenting pressure for improved reliability,
More informationILAC-G20:2002. Guidelines on Grading of Non-conformities
Guidelines on Grading of Non-conformities Copyright ILAC 2002 ILAC encourages the authorised reproduction of its publications, or parts thereof, by organisations wishing to use such material for areas
More informationREVISION OF ISO/IEC GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
REVISION OF ISO/IEC 17025 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES Presented August 10, 2017 to Environmental Measurement Symposium Warren Merkel, Co-convenor ISO/CASCO
More informationMeasurement comparisons in the CIPM MRA
Measurement comparisons in the CIPM MRA Contents 1. Background... 3 1.1. On the CIPM MRA... 3 2. Definitions... 3 2.1. Key comparison... 3 2.1.1. CIPM key comparison... 4 2.1.2. RMO key comparison... 4
More informationWork Programme. of the International Bureau of Weights and Measures. for the four years Comité international des poids et mesures
Work Programme of the International Bureau of Weights and Measures for the four years 2016-2019 Comments are invited from Representatives and NMI Directors from Member States and Associate States and Economies
More informationKAN GUIDE ON MEASUREMENT ASSURANCE
KAN-G-06 KAN GUIDE ON MEASUREMENT ASSURANCE Issue Number : 3 April 2016 Komite Akreditasi Nasional National Accreditation Body of Indonesia Gedung I BPPT, Lt. 14 Jl. MH Thamrin No. 8, Kebon Sirih, Jakarta
More informationDEPARTMENT OF LABOUR TR 85-03
DEPARTMENT OF LABOUR TR 85-03 DEPARTMENT OF LABOUR (DOL) AND SANAS TECHNICAL REQUIREMENTS FOR THE APPLICATION OF SANS/ISO/IEC 17020: 2012 IN THE REGULATORY ASSESSMENT OF LIFT, ESCALATOR AND PASSENGER CONVEYOR
More informationHandbook ISO/IEC 17025:2017
Handbook ISO/IEC 17025:2017 Page 1 of 32 General considerations This new standard ISO/IEC 17025 includes some noteworthy changes related to its structure and scope that should be mentioned before we go
More informationMANY important decisions are based on measurement results. Some of. Measurement Uncertainty. Chapter 1
1 Chapter 1 Measurement Uncertainty Decisions, Confidence and Measurement Uncertainty Comparability and Traceability ISO 17025 MANY important decisions are based on measurement results. Some of them are
More informationASTM International. Achieving Accreditation: Understanding The Process, Benefits and Proficiency Testing
Achieving Accreditation: Understanding The Process, Benefits and Proficiency Testing What is A2LA? - A2LA is a: - Non profit - Non governmental - Independent 3 rd party - Accreditation body - Established
More informationMyanmar Health Forum Myanmar International Convention Center II Naypyitaw, Myanmar (28-29 July 2015)
Myanmar Health Forum Myanmar International Convention Center II Naypyitaw, Myanmar (28-29 July 2015) Fostering Food Safety Infrastructure Development for Myanmar Food Industries MFPEA Presented by Dr.
More informationQUALITY ASSURANCE March 29, 2013 MANUAL Page 1 of 13
MANUAL Page 1 of 13 Contents 0 Scope and Field of Application... 2 1 Organization... 2 1.1 Responsibilities... 2 1.2 Resources... 3 2 1.3 Management Representative... 3 Quality System... 5 2.1 General...
More informationLeveraging ISO s Quality Management System to Achieve 24/7 Inspection Readiness. Randy Querry Accreditation Manager Clinical
Leveraging ISO 15189 s Quality Management System to Achieve 24/7 Inspection Readiness Randy Querry Accreditation Manager Clinical Goals Provide brief background on A2LA Differentiate between CLIA and ISO
More informationCalibration services Meeting our customers needs in the U.S.
Products Solutions Services Calibration services Meeting our customers needs in the U.S. Calibration services 2 Calibration services Fulfilling the needs of all industries Does the instrumentation that
More informationISO General Requirements for Competence of Testing Laboratories Procedure
Competence of Testing Laboratories Page: 1 of 24 ISO 17025 General Requirements for Competence of Testing Laboratories Procedure Competence of Testing Laboratories Page: 2 of 24 Table of Contents Para.
More informationENERGY EFFICIENCY ENERGY STAR
ENERGY EFFICIENCY ENERGY STAR UL s Performance Test Capabilities Luminaire Testing Laboratory (Allentown, PA) 2 UL s Performance Test Capabilities Nansha Technology Testing Center - Nansha, China 3 UL
More informationCalibration-approved belt scales according to MID
Matt Morrissey, Product Manager, Weighing Technology Calibration-approved belt scales according to MID Industries around the world use belt scales every day to weigh solid materials on conveyors gravel
More informationAmerican Association for Laboratory Accreditation
Page 1 of 18 The following pages present the requirements from R104 General s: Accreditation of Field Testing and Field Calibration Laboratories in a checklist format. The policies, procedures and activities
More informationSAMM POLICY 10 (SP 10) GRADING OF NON- CONFORMITIES Issue 2, 28 February 2007 (Amd.1, 11 August 2014)
SKIM AKREDITASI MAKMAL MALAYSIA (SAMM) LABORATORY ACCREDITATION SCHEME OF MALAYSIA SAMM POLICY 10 (SP 10) GRADING OF NON- CONFORMITIES Issue 2, 28 February 2007 (Amd.1, 11 August 2014) JABATAN STANDARD
More informationThe Case of the International Organization
International Regulatory Co-operation and International Organisations The Case of the International Organization of Legal Metrology (OIML) International Regulatory Co-operation and International Organisations
More information