CPP20511 Certificate II in Fire Protection Inspection and Testing
|
|
- Darcy Gibbs
- 6 years ago
- Views:
Transcription
1 CPP20511 Certificate II in Fire Protection Inspection and Testing WORKPLACE PROJECT ASSESSMENT Workplace Assessment for: CPP20511 Certificate II in Fire Protection Inspection and Testing Student Name: (Please print) Student Signature: Date of Submission: To be completed by Assessor Assessment: Competent Not Yet Competent Assessor Name: Assessor Signature: (Please print) Submission of Assessment PLEASE RETURN THIS ASSESSMENT CRITERIA SHEET WITH A HARD COPY OF YOUR ASSIGNMENT TASKS. Ensure that your name is on all documents, and that all documents are stapled together with the criteria sheet on top. ALL ASSESSMENT TASKS MUST BE RETURNED IN ONE DOCUMENT AT THE END OF PHASE 6. DO NOT SEND YOUR ASSESSMENT UNTIL ALL TASKS (PHASES 1-6) HAVE BEEN COMPLETED. Mail completed assessment tasks to: DELTRA Australia PO Box 459 SALISBURY Q 4107 PLEASE NOTE: ED ASSESSMENT WILL NOT BE ACCEPTED. Version: 2015.WP.1 Issued: 01/01/2015 1
2 Assessor Evaluation (Office Use Only) Please tick the appropriate box Criteria Yes No PHASE 1: Task 1 A clear & logical work method statement is provided for the client. PHASE 1: Task 2 An appropriate list of portable fire protection equipment in accordance with AS2444 is provided. Appropriate locations for the portable fire protection equipment in accordance with AS2444 are identified. A clear & logical quotation is provided for the client. PHASE 1: Task 3 Workplace expectations were identified. Work activities were scheduled & prioritised. Feedback was sought. PHASE 2: Task 1 The extinguisher is installed in accordance with AS2444. The extinguisher location sign is installed in accordance with AS2444. PHASE 2: Task 2 The fire blanket is installed in accordance with AS2444. The fire blanket location sign is installed in accordance with AS2444. PHASE 3: Task 1 A 6 monthly inspection was conducted on extinguishers in accordance with AS1851. PHASE 4: Task 1 A yearly inspection was conducted on a fire hose reel in accordance with AS1851. PHASE 4: Task 2 A 6-monthly inspection was conducted on a fire hydrant in accordance with AS1851. PHASE 5: Task 1 A yearly inspection was conducted on an emergency lighting system in accordance with AS/NZ Assessment comments (if necessary): Assessment Results: Competent Please tick the appropriate box & initial Not Yet Competent
3 PHASE 1: Task 1 Working Safely You are required to install 3 portable fire extinguishers at a refueling depot. The client has requested that you provide a work method statement to ensure that the risk of a dangerous incident is minimized. a. Prepare a work method statement for the installation of the extinguishers. This assessment task satisfies the knowledge and skills required to demonstrate competence in the following competency units: CPPFES2006A Prepare for installation & servicing operations CPPCMN2002A Participate in workplace safety arrangements
4 a. WORK METHOD STATEMENT TITLE OF ACTIVITY BACKGROUND INFORMATION Company Details Company ABN Site Address Planned Activity CONTROLS & IMPLEMENTATION Task Hazard / Risk Method of Control MONITORING OF SITE CONTROLS
5 PHASE 1: Task 2 Install Fire Extinguishers & Fire Blankets A potential new client has an industrial laundry with no fire protection equipment installed. The laundry is approximately 400m 2 in area, and contains 7 electric industrial washing machines and 4 gas powered industrial tumble dryers. There are 2 electric steam presses. There are 5 staff working in the laundry. Complete the following: a. make a list of the type of portable fire protection equipment that you believe the client requires in accordance with AS2444; and b. on the plan provided, indicate your recommended locations for the equipment; and c. provide a written quotation for the client. This assessment task satisfies the knowledge and skills required to demonstrate competence in the following competency units: CPPFES2006A Prepare for installation & servicing operations CPPCMN2003A Provide effective client service a. LIST OF EQUIPMENT REQUIRED Type of Equipment Rating Number Required Reason
6 b. LOCATIONS OF REQUIRED EQUIPMENT Rear Entrance Store Room Kitchenette Gas Dryers Electric Washing Machines Work Bench Wash Tubs Loading Bay Steam Presses Front Entrance c. ATTACH A COPY OF THE WRITTEN QUOTATION
7 PHASE 1: Task 3 Organising & Completing Work a) Workplace Expectations The organisation allocates resources to achieve its objectives and you as a worker are a resource. As such the workplace will have certain expectations of you. What does the organisation expect of you? (hint - source your job description and look for the required skills and knowledge or conversely discuss with your manager/supervisor). b) Scheduling Work Activities & Prioritising Work How is your work allocated to you? How do you determine what work is priority and what tasks can be pushed back? List the methods used by your organisation or by you if you are responsible for providing and prioritising work activities. c) Prioritising Work Scenario The activity relates to Task 2 Industrial Laundry. Your task is to prioritise the order of work from Task 2 justifying why you prioritised the tasks that way. d) Feedback In what ways can you obtain feedback in relation to the work you have completed in Task 2? (Include internal and external sources?) In what way is feedback regarding work performance provided in your workplace? This assessment task satisfies the knowledge and skills required to demonstrate competence in the following competency unit: BSBWOR202A Organise & complete daily work activities a) Workplace Expectations b) Scheduling Work Activities & Prioritising Work
8 c) Prioritising Work Scenario d) Feedback
9 CPP20511 Certificate II in Fire Protection Inspection & Testing Monthly Activity Log & Summary Task: You are required to complete a log of activities that you have completed this month relating to the CPP20511 course. A separate log must be kept for each month. Activities include: Installing fire extinguishers and/or fire blankets* Inspecting and testing fire extinguishers, fire blankets, fire hose reels, fire hydrants and/or emergency and exit lighting* Preparing work method statements, work plans or schedules, risk assessments etc Professional reading/further research on topics covered in the CPP20511 course All activities must be recorded on this template. Add additional log pages as required. You must also complete the monthly activity summary which is to be submitted with your activity log. The instructions for the summary are provided following the activity log. * Reminder: If you are doing this work in Queensland, you must be under personal supervision of an appropriately qualified person. Student Name: (Please print) Student Signature: Month of Activity: To be completed by Assessor Assessment: Activities Acceptable Activities Not Acceptable Assessor Name: Assessor Signature: (Please print)
10 Date Activity Work Tasks Performed Supervised? Initials Yes No
11 Date Activity Work Tasks Performed Supervised? Initials Yes No
12 CPP20511 Monthly Summary Task: You are required to select ONE activity that you have completed this month. This can be any activity from your workplace tasks or your monthly diary. Write a report on all aspects of that activity using the outline provided. Your report can be in dot-point format. Your summary may be hand-written on the template provided or completed in an electronic format using the headings provided and printed. Hand-Written Guidelines: Hand-written summaries must be legible, or the assessment will be returned. It is recommended that you print the pages single-sided. This will allow you to continue writing on the back of each page if you run out of space. Add more pages if you require additional space, but make sure that you record the topic number and title on each additional page (eg. 1. Work Health and Safety ) Workplace Assessment PHASE of 6 (insert phase number) Student Name: Student Signature: Activity Performed: Date Activity Performed: Location of Activity Performed: Was the activity supervised? YES NO Supervisor s Name (if applicable): Was the activity performed in the workplace, or was it simulated? Workplace Simulated * Reminder: If you are doing this activity in Queensland, you must be under personal supervision of an appropriately qualified person.
13 1. Health & Safety Consider: Risk assessment of work area Hazards, risks, controls Work method statements Safety signs, site safety plans Personal protective equipment Communication and procedures for reporting OHS issues Participation in OHS training
14 2. Manual Handling Consider: Assessing hazards and risks of movement paths and safe working loads Interpreting safety signs Dangerous Goods requirements Manual handling techniques Preventing ODS & SGG emissions
15 3. Legislation & Standards Consider: Building Code of Australia Relevant Australian Standards State/Territory legislation Importance of applying legislative requirements Implications of not applying legislative requirements
16 4. Organisational Requirements Consider: Organisational documentation Communication and reporting Organisational policies and procedures
17 5. Client Service and Quality Consider: Customer service Problem-solving Client confidentiality Communication Company client service standards, code of conduct, complaints handling procedures Range of company products and services The relevance of client service, good communication and your own role in delivering effective client service Quality control methods, including completing documentation
18 6. Work Organisation Write a list of each step that you undertook to complete this activity. Include steps such as: Receiving work order Organising resources (equipment, products) Scheduling time, making appointments, planning activity Practical steps undertaken [eg. Selected correct hardware (screws, drill, extinguisher bracket), measured correct installation height, screwed extinguisher bracket to wall, checked height again etc]
Conforming to General Health, Safety and Welfare in the Workplace
Unit Update A/503/1170: CONFORMING TO GENERAL HEALTH, SAFETY AND WELFARE IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published versions with effect
More informationPORTFOLIO WORKBOOK SELF ASSESSMENT AND RPL GUIDE TO ACHIEVE THE STATEMENT OF ATTAINMENT FOR WORK SAFELY IN THE CONSTRUCTION INDUSTRY CPCCOHS1001A
PORTFOLIO WORKBOOK SELF ASSESSMENT AND RPL GUIDE TO ACHIEVE THE STATEMENT OF ATTAINMENT FOR WORK SAFELY IN THE CONSTRUCTION INDUSTRY CPCCOHS1001A MARCSTA is a not-for-profit organisation. All proceeds
More informationMCMT251A Apply quality standards
MCMT251A Unit descriptor Competency field Application of the competency ELEMENT Apply quality standards This unit is based on LMTQAGN01A Apply quality standards. This unit covers the skills and knowledge
More informationOpportunities for Improvements in Safety and Health Management Systems for Coal Mines - An Auditor's Perspective
University of Wollongong Research Online Coal Operators' Conference Faculty of Engineering and Information Sciences 2009 Opportunities for Improvements in Safety and Health Management Systems for Coal
More informationJOB AND PERSON SPECIFICATION
JOB AND PERSON SPECIFICATION Position Title: Product Sales Team Leader Reports Directly to: Business Relationship Manager Responsible for: Mobile Sales Team Member of: Corporate & Commercial Division Grade:
More informationCHAS Assessment Standards
CHAS Assessment Standards Section 1 - All Prosecutions or Enforcement Notices The Supplier has provided details of any enforcement notices or prosecutions served on them in the last three years by the
More informationInstalling door ironmongery in the workplace
Unit Update H/503/2636: INSTALLING DOOR IRONMONGERY IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published versions with effect from January 2012.
More informationTAEASS403 Participate in assessment validation. TAE Training and Education Training Package. Trainer and Assessor Guide
TAEASS403 Participate in assessment validation TAE Training and Education Training Package Trainer and Assessor Guide Written by Sandy Welton www.trainingresourcesrto.com.au Purpose of this Trainer and
More informationTrainee Assessment Assess risk, develop risk management strategies, and prepare a risk management plan within a health organisation
Trainee Assessment Assess risk, develop risk management strategies, and prepare a risk management plan within a health organisation US 18686 V2 Level 5 Credits 6 Name Trainee assessment This trainee assessment
More informationOccupational Health and Safety Management Manual v2.2
Occupational Health and Safety Management Manual v2.2 Written: February 2013 Author: David Seymour, Director of Operations Co Author: Mathew Sprake, Operations Manager Approved: Board of Directors 1. Introduction
More informationRecognition of Prior Learning Guide
Recognition of Prior Learning Guide This document contains the guidelines and procedures for applying for Recognition of Prior Learning as a method of achieving competence. Contact details Learning and
More informationLevel 2 NVQ Diploma in Associated Industrial Services Occupations Passive Fire Protection (Construction)
Level 2 NVQ Diploma in Associated Industrial Services Occupations Passive Fire Protection (Construction) Qualification Specification ProQual 2016 Contents Page Introduction 3 Qualification profile 3 Qualification
More informationRail Safety Management Procedure General Engineering and Operational Systems - Asset Management of Rolling Stock
1/16 Management of Rolling Stock Revision Date Comments 1 January 2011 Procedure developed to support SMS and legislative requirements. 2 February 2012 Reviewed with RISSB Standards and change of titles
More informationMGTD Pirii National Registration Code: ABN Guide to use the Portfolio of Evidence Workbook for Recognition of Prior Learning
MGTD Pirii National Registration Code: 88194 ABN 49 139 223 153 Guide to use the Portfolio of Evidence Workbook for Recognition of Prior Learning Unit 4, 39 Denninup Way, Malaga WA 6090 (PO Box 8, Ballajura
More informationLevel 3 Diploma in Warehousing and Storage ( )
Level 3 Diploma in Warehousing and Storage (06-07) Candidate logbook 600/3766/0 www.cityandguilds.com January 202 Version.0 About City & Guilds City & Guilds is the UK s leading provider of vocational
More informationQuality Manual DRAFT. Quality Management Plan Version A1 Date: <22/01/11> Page 1 of 17
Quality Manual DRAFT Page 1 of 17 Document Acceptance and Release Notice This is Revision A1 of the East Coast Designer Builders Quality Manual. The Manual is a managed document. For identification of
More informationCommunity & Client Services. Health & Regulatory Services
Position Title: Team Leader Environmental Health Level: Salaried 6 Department: Program: Position Numbers: Community & Client Services Health & Regulatory Services HRS011 Position Objective Contribute to
More informationPreparing and Operating Industrial Counterbalanced Forklifts to Lift and Transfer Loads in the Workplace
Unit 18: Unit reference number: Preparing and Operating Industrial Counterbalanced Forklifts to Lift and Transfer Loads in the Workplace M/600/7894 QCF level: 2 Credit value: 16 Guided learning hours:
More informationBRC Food Safety Management System Implementation Workbook
We have written this workbook to assist in the implementation of your BRC food safety management system. The workbook is divided into 8 steps that are designed to assist you in implementing your food safety
More informationDivision: Planning and Regulation Job Grade: JG4A
Position Title: Position Number: 3032 Division: Planning and Regulation Job Grade: JG4A Unit: Building and Environmental Health Award base: 35 Hours Unit Leader: Manager Building and Environmental Health
More informationWork Health and Safety Management Systems and Auditing Guidelines
Work Health and Safety Management Systems and Auditing Guidelines 5th edition, September 2013 (Updated May 2014) Work Health and Safety Management Systems and Auditing Guidelines These Guidelines are a
More informationBSB30115 Certificate III in Business
BSB30115 Certificate III in Business A Guide to Training and Assessment Activities Supporting the BSB Business Services Training Package Release 2.0 Shea Business Consulting stockcode: SHEA92 Why has
More informationRecognition of Prior Learning. CPP20212 Certificate II in Security Operations
Recognition of Prior Learning - Section 2 of 2 Application for (RPL) Recognition of Prior Learning for C a n d i d a t e A p p l i c a t i o n C a n d i d a t e N a m e : S t u d e n t N o : D a t e o
More informationConstruction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway)
Construction, Planning and the Built Environment Unit Content and Assessment Guidance (Attachments pathway) NCFE Level 2 NVQ Certificate in Plant Operations (Construction) (Attachments pathway) (601/7277/0)
More informationSpecification. Edexcel NVQ/competencebased qualifications. Edexcel Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF)
Specification Edexcel NVQ/competencebased qualifications Edexcel Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF) For first registration April 2011 Unit 1: Unit code: Unit number: Set
More informationWorkplace Self-Assessment
WSN s Workplace Excellence Awards Program recognizing workplace excellence in health & safety Workplace Self-Assessment Every Worker, home safe and healthy. WSN Workplace Excellence Awards Program, February
More informationLevel 3 NVQ Diploma in Wood Occupations (Construction) (6571)
Level 3 NVQ Diploma in Wood Occupations (Construction) (6571) QUALIFICATION LOGBOOK September 2017 Version 4.8 Candidate Logbook/Work-Based Evidence Record Mandatory units Level 3 NVQ Diploma in Wood Occupations
More informationTraining and Assessment Strategy
Overview Unit Code: HLTAID002 Unit Title: Provide basic emergency life support AQF Level: II Industry: Numerous Sub Industry: Numerous Training Package: HLT Version: Site Locations: Perth and throughout
More informationcomponents in the workplace
Unit Update T/503/3404: INSTALLING SECOND FIXING COMPONENTS IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published versions with effect from January
More informationAPS Cleaning Quality Management System Scope of Certification The provision of commercial and industrial cleaning services throughout Queensland.
Quality Management System Scope of Certification The provision of commercial and industrial cleaning services throughout Queensland. Table of Contents Contents 1. Introduction... 3 1.1. Process Approach...
More informationFPIC3007A Sharpen cutting tools
FPIC3007A Unit Descriptor Pre-requisite Unit(s) Application of the Unit Competency Field Sector ELEMENT Elements describe the essential outcomes of a unit of competency 1 Determine required cutting tool
More informationInformation Kit on Assessing Bunk Beds
Information Kit on Assessing Bunk Beds Introduction Governments around Australia and New Zealand have introduced regulations which took effect from 1 November 2002 which have made it an offence to sell
More informationVERTICAL ASSESSMENT INSPECTION ISO/IEC 17020:2012
VERTICAL ASSESSMENT INSPECTION ISO/IEC 17020:2012 Organisation s SANAS No/s. Date/s of evaluation Name of Organisation Organisation Representative Area/Field of Accreditation as per schedule of accreditation
More informationEvidence Logbook. Level 5 Diploma in LEADERSHIP IN HEALTH AND SOCIAL CARE AND CHILDREN AND YOUNG PEOPLES SERVICES (ENGLAND)
Level 5 Diploma in LEADERSHIP IN HEALTH AND SOCIAL CARE AND CHILDREN AND YOUNG PEOPLES SERVICES (ENGLAND) Evidence Logbook Qualification recognition number: 601/4400/2 Qualification Reference: L5DLHSCCYPSE-HA
More informationElectrical Safety Management Plan (ESMP)
Electrical Safety Management Plan (ESMP) CONTENTS 1 INTRODUCTION 4 1.1 Purpose 4 1.2 Background 4 2 OBJECTIVES OF THE ESMP 2.1 Electrical Safety Policy 2.2 Electrical Safety Goals 2.3 Objectives 5 5 5
More informationOccupational Health and Safety. Improvement Standard
Premier s Department New South Wales Occupational Health and Safety Improvement Standard A tool for measuring OHS performance within NSW Government Agencies OHS IMPROVEMENT STANDARD NSW GOVERNMENT - REVIEW
More informationTrainee Assessment Knowledge of risk management plan
Trainee Assessment Knowledge of risk management plan Unit standard Version Level Credits 23389 Describe risk management planning in a health or wellbeing setting 3 3 3 Your name: Your workplace: Your date
More information(Individual Owner-Operator Audit) Version 2.0
IOO Audit (Individual Owner-Operator Audit) GUIDELINES Version 2.0 Designed for: Owner-operators with no other field employees Owner-operators with no more than one office support person 420 Albert Street,
More informationBSB41415 Certificate IV in Work Health and Safety. Safety Culture and Compliance. V1.0 Produced 25 November 2015
BSB41415 Certificate IV in Work Health and Safety Safety Culture and Compliance V1.0 Produced 25 November 2015 Copyright 2016 Compliant Learning Resources. All rights reserved. No part of this publication
More informationPOSITION DESCRIPTION
POSITION DESCRIPTION POSITION TITLE: TENURE: LOCATION: REPORTING MANAGER: LEADERSHIP PROVIDED TO: NATIONAL HSE COORDINATOR Full Time Mile End National HSE Manager 1. POSITION SUMMARY The National Health
More informationCertificate IV in Government (Procurement & Contracting) Public Offer Course PSP42410
Title: Certificate IV in Government (Procurement & Contracting) Public Offer Course PSP42410 Family Name: Given Name/s: Name to appear on certificate: Unique Student Identifier (USI): Please apply for
More informationEvidence Booklet. OCR Award and Certificate in Employability Skills /10400/10401/10402/10403/10404 Unit 4: Know how to complete a job search
Evidence Booklet OCR Award and Certificate in Employability Skills 0399/0400/040/040/0403/0404 Unit 4: Know how to complete a job search Version Oxford Cambridge and RSA Evidence Booklet Unit 4: Know how
More informationGUIDELINES FOR CONTRACTOR ENVIRONMENTAL MANAGEMENT PLANS CS-ENV-08
CS ENERGY PROCEDURE FOR GUIDELINES FOR CONTRACTOR ENVIRONMENTAL MANAGEMENT PLANS CS-ENV-08 Responsible Officer: Manager Environment Approved: Executive General Manager Asset Strategy DOCUMENT HISTORY Date
More informationWUNGENING ABORIGINAL CORPORATION
WUNGENING ABORIGINAL CORPORATION Employment Information Pack Date: August 2017 Version: 3 Page 1 of 2 Congratulations on taking the first step towards working for Wungening Aboriginal Corporation (Wungening),
More informationWork Based Training Policy and Procedure
1. Purpose This policy and procedure describes how practical placements are to be arranged to ensure that each placement achieves its aims and all stakeholders are protected from liability including gaining
More informationHEALTH & SAFETY ASSESSMENT SCHEME CONTRACTOR & PRINCIPAL CONTRACTOR APPRAISAL QUESTIONNAIRE
HEALTH & SAFETY ASSESSMENT SCHEME CONTRACTOR & PRINCIPAL CONTRACTOR APPRAISAL QUESTIONNAIRE The purpose of the health and safety questionnaire is to provide Clients with assurances that all companies on
More informationUnit 12: Work experience in IT (LEVEL 2)
(LEVEL 2) Learning outcomes By completing this unit candidates will develop skills, knowledge and understanding required to work in a real business environment by undertaking and learning from a work experience
More informationRECOGNITION OF PRIOR LEARNING (RPL) AND NATIONAL RECOGNITION POLICY
RECOGNITION OF PRIOR LEARNING (RPL) AND NATIONAL RECOGNITION POLICY Recognition is a term that covers Recognition of Prior Learning (RPL), and Recognition of Current Competency (RCC) and Skills Recognition.
More informationEvidence Booklet. OCR Award and Certificate in Employability Skills
Evidence Booklet OCR Award and Certificate in Employability Skills 10399/10400/10401/10402/10403/10404 Unit 8: Understand how to complete a job search Version 2 Oxford Cambridge and RSA Evidence Booklet
More informationASBESTOS REMOVAL CONTROL PLAN
APPROVED CODE OF PRACTICE // MANAGEMENT AND REMOVAL OF ASBESTOS ASBESTOS REMOVAL CONTROL PLAN This Appendix is a template of an asbestos removal control plan. It is designed to incorporate the elements
More informationQUALITY MANAGEMENT SYSTEM QUALITY MANUAL ISO 9001:2008
QUALITY MANAGEMENT SYSTEM QUALITY MANUAL ISO 9001:2008 EXPRESS CONTRACTING SERVICES PTY LTD TRADING AS GOLDEN BROWN CLEANING SERVICES Unit 8/217 Mickleham Road Tullamarine VIC 3043 www.goldenbrown.com.au
More informationSupervise the health, safety and welfare of a learner in the workplace
Unit Title: OCR unit number 9 Unit accreditation number Supervise the health, safety and welfare of a learner in the workplace Y/601/6847 Level: 3 Credit value: 4 Guided learning hours: 22 Unit expiry
More informationThe Horse Rangers Association Health & Safety Policy
The Horse Rangers Association Health & Safety Policy General Statement of Intent The company believes that excellence in the management of health and safety is an essential element within its overall business
More informationCHC40108 Certificate IV in Aged Care
CHC40108 Certificate IV in Aged Care 4 STEP - RPL KIT Sand Goanna Institute (ABN 46 994 171 449) 13/230 Main South Road, Morphett Vale South Australia 5162 PH: 1300 266 730 EMAIL to: rpl@sandgoanna.com.au
More informationAustralian Hotels Association
Australian Hotels Association Submission in relation to: Discussion Paper - Template Labour Agreement for the Tourism & Hospitality Industry Labour Agreement Section Department of Immigration and Citizenship
More informationPolicy Work Health and Safety (WHS) RCPA Introduction WHS legislation
Policy Subject: Work Health and Safety (WHS) Approval Date: July 2011, December 2014 Review Date: July 2018 Review By: Board of Directors Number: 1/2011 The Royal College of Pathologists of Australasia
More information2013/14 Company Profile
2013/14 Company Profile SAPPHIRE COAST TREE SERVICE & TOWER HIRE CONTENTS OVERVIEW 2 PLANT AND EQUIPMENT 3 RESOURCES 3 MANAGEMENT SYSTEMS AND CERTIFICATION 4 QUALITY POLICY 4 ENVIRONMENTAL PROTECTION POLICY
More informationLevel 3 NVQ Certificate in Occupational Health and Safety
Level 3 NVQ Certificate in Occupational Health and Safety Qualification Specification ProQual 2014 Contents Page Introduction 3 The Qualifications and Credit Framework (QCF) 3 Qualification profile 4 Rules
More informationBefore you begin. Topic 1: Provide WHS information to the work team 1. Learning checkpoint 1: Provide WHS information to the work team 15
Contents Before you begin vii Topic 1: Provide WHS information to the work team 1 1A Explain WHS legislation and codes of practice to the work team 2 1B Provide accessible organisational WHS information
More informationLevel 2 NVQ Certificate in Erection of Precast Concrete (Construction)
Level 2 NVQ Certificate in Erection of Precast Concrete (Construction) Qualification Specification ProQual 2016 Contents Introduction 3 Qualification profile 3 Qualification Structure 4 Pathway 1 Flooring
More informationRPL Policy and Procedures
Purpose: CAC provides students with the benefit of Recognition of Prior Learning (RPL) and Credit transfer as a part of the assessment system for gaining prior skill, knowledge and experience credit while
More informationLevel 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) Pathway 29: Plant Road Sweeping. Qualification Specification
Level 2 NVQ Diploma in Roadbuilding and Maintenance (Construction) Pathway 29: Plant Road Sweeping Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Entry requirements
More informationPosition Description
Position Description POSITION TITLE: Food and Beverage Inventory Administrator SCHOOL/OFFICE: Food and Beverage Department CLASSIFICATION LEVEL: Bond Level 4 DATE LAST UPDATED: April 2016 This position
More informationSupervise food service
Supervise food service M/502/9562 Learner name: Learner number: VTCT is the specialist awarding body for the Hairdressing, Beauty Therapy, Complementary Therapy, Hospitality and Catering and Sport and
More informationFPIC2023A Trim and crosscut felled trees
FPIC2023A Unit Descriptor Pre-requisite Unit(s) Application of the Unit Competency Field Sector Trim and crosscut felled trees This unit specifies the outcomes required to trim and crosscut felled trees
More informationRPL Record of Evidence Supporting application for
RPL Record of Evidence Supporting application for BSB41407 Certificate IV in Occupational Health and Safety Your Details: Given Names (please use legal name) Family Name (please use legal name) Postal
More informationBEd TAS additional assessment tasks to be completed during EPT441 or EPT442
CSU Advance Locked Bag 588 Boorooma Street Wagga Wagga NSW 2678 Australia Tel: 0269332722 Email: csuadvance@csu.edu.au BEd TAS additional assessment tasks to be completed during EPT441 or EPT442 1. Overview
More informationSAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number E-2.0 Safety Audits and Inspection Program
Number E-2.0 Issued: 1/2009 Revised: 12/2015 Page 1 of 2 1.0 PURPOSE: To establish a formal system to routinely self-inspect each Euramax facility in an effort to detect unsafe and/or hazardous conditions,
More informationSECTION 1 - INTRODUCTION 2 PURPOSE 2 SCOPE 2 DEFINITIONS 2 LEGISLATIVE CONTEXT 4 RESPONSIBILITIES 4
OH&S Procedure Name: Manual Handling Procedure Approved by: Director Human Resources Last reviewed: December 2013 SECTION 1 - INTRODUCTION 2 PURPOSE 2 SCOPE 2 DEFINITIONS 2 LEGISLATIVE CONTEXT 4 RESPONSIBILITIES
More informationHEALTH AND SAFETY TRAINING COURSES
HEALTH AND SAFETY TRAINING COURSES DON T DICE WITH HSE REGULATIONS www.bossfederation.com ACCIDENTS HAPPEN! PROTECT YOURSELF, YOUR EMPLOYEES AND YOUR CLIENTS As an employer you have a duty of care to ensure
More informationLevel 4 Award in the Internal Quality Assurance of Assessment Processes and Practice
Level 4 Award in the Internal Quality Assurance of Assessment Processes and Practice CANDIDATE SKILLSCAN Name Date Unit 401 Understanding the Principles and Practices of Internally Assuring the Quality
More informationQuality Assurance Manual
Quality Assurance Manual Current Electrical is committed to leading the market in satisfying customer needs by providing versatile and innovative electrical and control solutions We take pride in the ability
More informationHealth & Safety IN-HOUSE / PEER AUDITS EXPLAINED (Including Toolkit)
Health & Safety IN-HOUSE / PEER AUDITS EXPLAINED (Including Toolkit) Document No: G027:07-15/1 Page 1 A Sensible Risk Management approach The Corporate Health Safety & Wellbeing Service is striving to
More informationCertificate IV Recordkeeping Diploma of Management Diploma of Recordkeeping Advanced Diploma of Recordkeeping Advanced Diploma of Management
Certificate IV Recordkeeping Diploma of Management Diploma of Recordkeeping Advanced Diploma of Recordkeeping Advanced Diploma of Management Training Schedule Numbers: Times: Minimum of 10 and maximum
More informationPowered Industrial Truck/Forklift Operations Standards and Procedures. Disaster Cycle Services Standards & Procedures DCS SP DMWT
Powered Industrial Truck/Forklift Operations Standards and Procedures Disaster Cycle Services Standards & Procedures DCS SP DMWT April 2015 Change Log Date Page(s) Section Change Author: Deploy Materials,
More informationConstruction & Trades Testing and Tagging Requirements
Construction & Trades Testing and Tagging Requirements All constructio n and demolition sites have a Testing and Tagging requirement for electrical equipment under AS/NZS 3012:2010. On this page you will
More information1 Determine the legal framework of OHS in the workplace
Element 1 1 Determine the legal framework of OHS in the Performance Criteria On completion of this section you should be able to: Identify and access current OHS legislation, codes, standards, policies
More informationEqual Employment Opportunity Compliance Training. Course Outline!
Equal Employment Opportunity Compliance Training Course Outline Module 1 Terms and concepts 1. define and give examples of equal employment opportunity, discrimination and harassment 2. identify the laws
More informationBRC Storage and Distribution Quality and Safety Management System Implementation Workbook
We have written this workbook to assist in the implementation of your BRC quality & safety management system. The workbook is divided into 8 steps that are designed to assist you in implementing your quality
More informationSQF 2000 Food Safety Management System Implementation Workbook
This comprehensive SQF 2000 Food Safety and Quality Management System package contains everything you will need to achieve SQF 2000 Certification. We have written this workbook to assist in the implementation
More informationHazardous. Scheme. the power behind your business
Hazardous Areas Scheme YOUR GUIDE TO REGISTRATION the power behind your business GUIDE TO REGISTRATION REQUIREMENTS Electrical work in potentially explosive atmospheres (hazardous areas) is not included
More informationPROBUILD GUIDE SUBCONTRACTOR QUALITY MANAGEMENT. Section Two Project Specific Quality Management Plans. Version No 1.
PROBUILD SUBCONTRACTOR QUALITY MANAGEMENT GUIDE Section Two Project Specific Quality Management Plans Version No 1. PREFACE This document has been developed to assist subcontractors to meet Probuild s
More informationOur health and safety policy objective is that no person will come to harm while working, studying or visiting UNSW.
Introduction This plan sets health and safety objectives for UNSW for -2018 based on UNSW s Policy and in support of the UNSW 2025 Strategy and associated Faculty and Division Operational Plans. This plan
More informationWORK PLACEMENT AGREEMENT
WORK PLACEMENT AGREEMENT Thank you for choosing a Ravensbourne student for work placement. We hope the placement experience will be positive and that you will want to work with us on a continuing basis.
More informationISO Food Safety Management System Implementation Workbook
This FSSC 22000 Implementation Workbook compliments our comprehensive FSSC 22000 Packaging Food Safety Management System package and guides you on the path to achieving FSSC 22000 Certification. We have
More informationNWPNET031 CONSTRUCT AND INSTALL WATER DISTRIBUTION ASSETS STEEL MAINS IS A NATIONALLY RECOGNISED TRAINING ORGANISATION (CODE 90669)
CONSTRUCT AND INSTALL WATER DISTRIBUTION ASSETS STEEL MAINS IS A NATIONALLY RECOGNISED TRAINING ORGANISATION (CODE 90669) CONSTRUCT AND INSTALL WATER DISTRIBUTION ASSETS PROGRAM OVERVIEW & OUTLINE OVERVIEW
More informationQuality Risk Management
Implementation of ICH Q8, Q9, Q10 Quality Risk Management International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use Introduction Structure of
More informationAsbestos Safety Toolkit
HUMAN FOCUS Self-help Asbestos Safety Toolkit Contents Preparing to improve asbestos safety 2 An example asbestos safety policy statement 3 Main steps of the risk assessment process 5 Risk assessment form
More informationSocial Sector Accreditation Standards Level 4
Social Sector Accreditation Standards Level 4 Introduction These standards for accreditation are produced by the New Zealand Government for the accreditation of providers funded to deliver social services.
More informationCONTENTS. This log book belongs to:
CONTENTS PLACEMENT DETAILS 3 WORK HEALTH AND SAFETY 4 INSURANCE 4 INDUCTION CERTIFICATE 6 DAILY TIMESHEET 7 WORK EXPERIENCE LEARNING 8 STUDENT EVALUATION 11 PARENT/GUARDIAN EVALUATION 12 CODE OF ETHICS
More informationPosition Description: Client Services Coordinator. headspace Bairnsdale General Manager Operations Date effective October 2016
Position Description: Client Services Coordinator Location headspace Bairnsdale Approval General Manager Operations Date effective October 2016 POSITION SUMMARY The Client Services Coordinator provides
More informationTrainee Assessment. Peer mentoring. Unit standard Version Level Credits
Trainee Assessment Peer mentoring Unit standard Version Level Credits 28991 Provide peer mentoring in a health or wellbeing setting 1 4 6 Your name: Your workplace: Your date of birth: NSN number (if you
More informationAudit report VET Quality Framework
The QCAA uses an exceptions-based model of reporting. This means that the QCAA will only record a comprehensive description of evidence gathered and compliance findings if noncompliance is identified at
More informationASBESTOS MANAGEMENT PLAN. July Document Version: 1
July 2017 Document Version: 1 Document Control Document ID: Put: \root directory \path here Version No. Date Revision Details Author Endorsed Approved 1.0 28 th July 2017 VLD AM SW Page 2 FOREWORD The
More informationCandidate Name: Assessment Centre: This Unit has the following elements: Monitor and maintain the filling and cleaning of vending machines
This Unit has the following elements: Element 1 (HS16.1) Element 2 (HS16.2) Supervise the vending service Monitor and maintain the filling and cleaning of vending machines Candidate Name: Assessment Centre:
More informationGUIDE FOR APPLICANTS
GUIDE FOR APPLICANTS This guide has been prepared to assist you in applying for a position with Port of Newcastle. Prior to completing your application, please read the following information to gain an
More information» EWP LICENCE. Licence to Conduct High Risk Work Elevating Work Platform. Information Package for Applicants
» TRANSTRAIN PTY LTD Tel: 1300 665 170 or (03) 6423 2110 www.transtrain.com.au» MOTORCYCLE & SCOOTER SKILLS Tel: 1300 798 398 or (03) 6423 6850 www.motorcycle-scooter-skills.com.au PO Box 300 DEVONPORT
More informationBuddy a colleague to develop customer service skills. unit 225
Image courtesy of Transport for London unit 225 Buddy a colleague to develop customer service skills This unit is all about providing support to a colleague to help them develop their customer service
More informationProcedure: Safety Management System Procedure - My Safety
Procedure: Safety Management System Procedure - My Safety 1. Purpose Ensure a framework for managing OHS risks is implemented integrating the organisation's planning, management, reporting processes, communication,
More informationEvidence Booklet. OCR Award and Certificate in Employability Skills /10400/10401/10402/10403/10404 Unit 10: Learn how to manage money.
Evidence Booklet OCR Award and Certificate in Employability Skills 10399/10400/10401/10402/10403/10404 Unit 10: Learn how to manage money Version 2 OCR 2015 Unit 10: Learn how to manage money 1 Oxford
More information