Popcorn Machine. Instruction Manual

Transcription

1 Popcorn Machine Model VBG802 Instruction Manual Version Pepper Mill Court, Mississauga, ON, L5L 4X Witmer Industrial Estates, Unit 4, Niagara Falls, NY,

2 Table of Contents Model VBG802 Section General Information Page Safety and Warranty Technical Specifications Operation Maintenance Troubleshooting Parts Breakdown Electrical Schematics Warranty Registration

3 General Information Omcan Manufacturing and Distributing Company Inc. and Food Machinery Of America, Inc. dba Omcan are not responsible for any harm or injury caused due to any person s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation. CHECK PACKAGE UPON ARRIVAL Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damaged to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party. The unit is environment-friendly with an excellent design. It includes components to maximize power saving, complete functions and is easy to operate. The unit is easy to clean. Please review this manual prior to use and follow the cleaning instructions. Safety and Warranty Operations and repairs of this product must be performed by the experts or qualified persons or those who have gotten the license of installation, or those who are authorized by the manufacturer. When conducting installation or maintenance, please obey the following instructions carefully to ensure the safe use of this appliance. Please keep this instruction manual for future reference. Make sure none of the parts are missing or damaged upon arrival. If there is any doubt about the product, please do not use it, and contact Omcan at Keep the packing material out of reach of the children to avoid accident. This appliance could be only operated by the person who is familiar with the unit. When not using the appliance or the operator is absent, please turn off the unit to avoid any accidental injury or damage. The unit can only be repaired by trained personnel and only use original parts. It will be dangerous if not following the above requirements. Do not rinse the equipment with water directly. Clean the surface of stainless steel periodically with appropriate method to prevent any damage brought by oxidization or any other chemical interference. 3

4 Safety and Warranty IMPORTANT SAFEGUARDS 1. The machine should be put in stable and firm surface. Avoid direct contact with sunlight or rain. Do not place on or near a hot gas or electric burner. Do not use outdoors. 2. Machine needs to be plugged into 110V dedicated circuit to operate properly. When using an electrical appliance, basic safety precautions should always be followed. 3. Always attach the plug to the appliance first, then plug the cord in the wall outlet. To disconnect, turn any control off then remove the plug from wall outlet. 4. Unplug the power cord from the outlet when not in use and before cleaning. WARNING 1. Water must NEVER be put on the popping kettle. 2. DO NOT touch inside parts when the machine is hot as it may cause serious injury. 1 YEAR WARRANTY The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. For suitable recycling, we suggest disposing of the products separately (differentiated waste) according to local standards. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT! Technical Specifications Watts 1300W Temperature 220 C C / 428 F F Inner Dimension (DWH) Efficiency 3-5 mins. per tray Kettle Volume 8 oz. / 1 cup Bowl Diameter H Electrical 110V / 60 / 1 Weight 51.7 lbs. Dimension (DWH)

5 Operation TRANSPORTATION AND STORAGE The unit should be handled with care to avoid damage to the glass. The unit should not be transported sideways or shook. The unit should not be placed in an outdoor area. It should be put in storage which has good ventilation and has no corrosive gases present. If must be put in outdoor area, do not let the unit be in contact with direct sunshine and rain. OPERATING INSTRUCTIONS 1. Turn on the WARM and HEATING switches on the top of cabinet. Wait 3~6 minutes for kettle to heat up. 2. When machine is ready, turn on, to start the motor. 3. Add corn & oil (and seasoning salt if desired) to the kettle. DO NOT OVERFILL. 4. Close the doors or the oil and popcorn will immediately spray out all over the sides of the machine. 5. When the popping stops, turn off the unit. Always have the kettle motor switch OFF when not popping corn. 6. Dump popped corn by releasing the kettle, rotating the black handle and pulling downward. Put the kettle back in place using the black handle to hook the kettle to the holding bolt. 7. If you are making several batches continuously, you do not have to wait for machine to reheat. It will already be pre-heated. 8. In order to keep your popcorn warm, turn the WARM switch on. 9. Motor air intake and exhaust holes of the machine must be clear of any obstructions. Maintenance 1. Clean your popcorn machine after every use. 2. Make sure the machine is unplugged and the kettle has completely cooled. 3. Wipe all oils off the inside and outside of the kettle with a DRY clean soft cloth. 4. Do not use benzene, scrubbing brushes or chemical cleaners, as these will damage the machine. 5. NEVER immerse the base of machine in water or let water drip inside. 5

6 Troubleshooting Problem Cause Solutions Lights are off while turned on. The motor does not rotate/heat when the TURN switch is on. The heating temperature is too high or too low. The power cord is not properly plugged into the outlet or the machine. The heating tube line is loose/ burnt. The constant temperature element is out of order. Turn off all switches and make sure the power cord is firmly plugged into the outlet and machine. Turn on the switch again. Tighten the line/change the heating tube. Change the element. 6

7 Parts Breakdown Model VBG

8 Parts Breakdown Model VBG Description Position Description Position Description Position Top Cover Thermostat 24 Pin 47 Motor 2 Heater Depressor 25 Spring Pin 48 Middle Fortified Sheet 3 Pan s Crust 26 Pan s Left Lug 49 Switch 4 Bottom Clapboard 27 Pan s Pothook (Left) 50 Middle Clapboard 5 Pan s Right Lug 28 Big Bulb 51 Small Bulb 6 Cam Handle 29 Wire s Tube 52 Small Lamp Holder Splint 7 Anterior Splint of Top Cover 30 Bulb Protective Cover 53 Side Splint of Top Cover 8 Door s Gemel 31 Big Lamp Holder 54 Door s Magnet 9 Door s Axes 32 Cancel 55 Annular Magnet 10 Door s Clamp 33 Connector Plugs 56 Cancel 11 Glass Door 34 Close Cover 57 Pan Cover 12 Door Knob 35 Back Columiniation 58 Pan s Pothook (Right) 13 Rotatable Baffle 36 Anterior Columiniation 59 Pothook Sheet 14 Tray 37 Back Splint of Top Cover 60 Spring Sheet 15 Warmer Heater Depressor 38 Big Lamp Holder Splint 61 Cover Handle Thermostat 39 Connector Socket 62 Cam 17 Warmer Heating Element 40 Wire s Depressor 63 Motor s Shaft 18 Junction Box s Cover 41 Back Glass 64 Ferrule 19 Junction Box 42 Side Glass 65 Popcorn Pan 20 Base Crust 43 Side Aluminium Slot 66 Beater 21 Base Feet 44 Back Plastic Sheet 67 Sealed Ring 22 Backside Aluminum Slot 45 Side Plastic Sheet 68 Helical Heating Element 23 Tube s Depressor 46 Power Cord 69 8

9 Electrical Schematics Model VBG Position Wk1 Wk2 Wk3 Wk4 Wk5 M1 R1 R2 D1 D2 Description TURN Switch HEATING Switch Heating Temperature Lighting Heat Preservation Switch Heat Preservation Temperature Motor Heating Tube Heating Tube Lighting Lighting 9

10 10

11 Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: For mailing in Canada OMCAN INC. PRODUCT WARRANTY REGISTRATION 3115 Pepper Mill Court, Mississauga, Ontario Canada, L5L 4X5 For mailing in the US OMCAN PRODUCT WARRANTY REGISTRATION 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, New York USA, Purchaser s Information Name: Company Name: Address: Telephone: City: Province or State: Postal or Zip: Address: Country: Type of Company: Restaurant Bakery Deli Dealer from which Purchased: Butcher Supermarket Caterer Dealer City: Dealer Province or State: Institution (specify): Invoice: Other (specify): Model Name: Model Number: Serial Number: Machine Description: Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY): Thank you for choosing Omcan 11

12 Over the last 60 years, Omcan has grown to become a leading supplier to the food service industry in Canada and the USA. Our success over these many years is directly attributed to our established relationships with all of our valued customers and through providing them with Diverse, Dependable and Proven products. Omcan continues to help our customers remain competitive. With associates in North America, Europe, Asia, and South America, our global footprint continues to expand as we hold to the principle that clients benefit from the accessibility and familiarity of our sales team. In 2013 as our geography and brand recognition continued to grow, we changed to one name Omcan Food Machinery. In over 200,000 sq ft of warehouse space we stock over 2,500 quality food equipment and supplies for the food preparation market.